In vitro evaluation of a chitosan membrane cross-linked with genipin

Emerging horizons and prospects of polysaccharide-constructed gels in the realm of wound healing

Polysaccharides, with the abundant availability, biodegradability, and inherent safety, offer a vast array of promising applications. Leveraging the remarkable attributes of polysaccharides, biomimetic and multifunctional hydrogels have emerged as a compelling avenue for efficacious wound dressing. The gels emulate the innate extracellular biomatrix as well as foster cellular proliferation. The distinctive structural compositions and profusion of functional groups within polysaccharides confer excellent physical/chemical traits as well as distinct restorative involvements. Gels crafted from polysaccharide matrixes serve as a robust defense against bacterial threats, effectively shielding wounds from harm. This comprehensive review delves into wound physiology, accentuating the significance of numerous polysaccharide-based gels in the wound healing context. The discourse encompasses an exploration of polysaccharide hydrogels tailored for diverse wound types, along with an examination of various therapeutic agents encapsulated within hydrogels to facilitate wound repair, incorporating recent patent developments. Within the scope of this manuscript, the perspective of these captivating gels for promoting optimal healing of wounds is vividly depicted. Nevertheless, the pursuit of knowledge remains ongoing, as further research is warranted to bioengineer progressive polysaccharide gels imbued with adaptable features. Such endeavors hold the promise of unlocking substantial potential within the realm of wound healing, propelling us toward multifaceted and sophisticated solutions.

Design of bioactive and biomimetic scaffolds based on chitosan-alginate polyelectrolyte complexes for tissue engineering

The replacement and regeneration of biological tissues by fabricating three-dimensional functionalized constructs that can improve material interaction with cells is an important challenge of tissue engineering. In this study, bioactive and biomimetic scaffolds based on chitosan-alginate polyelectrolyte complexes (PECs) were fabricated by freeze-drying method and then crosslinked with CaCl2. Various chitosan-alginate (CS-AL) molar ratios were used to obtain PECs with different structural and mechanical properties. The CS1-AL2.3 scaffold showed to possess the best mechanical properties (8 MPa) and good pore morphology with an average size of 100-150 μm. After the crosslinking process, a less porous structure but with higher elastic modulus (30 MPa) was obtained. To make matrix bioactive and biomimetic, the CS1-AL2.3 system was first functionalized with 3,4-dihydroxyhydrocinnamic acid (HCAF) and then with PySO3 or Heparin to introduce groups/molecules mimicking the extracellular matrix. While the antioxidant properties of the scaffolds containing HCAF improved by 3 orders of magnitude, compared to the non-functionalized matrix, the introduction of sulfonic groups into the bioactive scaffold made the structure more porous and hydrophilic with respect to the heparinized one also favoring the penetration and proliferation of fibroblasts into the scaffold. These results indicate the potential of these novel systems for tissue engineering.

Development of Antioxidant and Antimicrobial Membranes Based on Functionalized and Crosslinked Chitosan for Tissue Regeneration

Tissue engineering is an interdisciplinary field that develops new methods to enhance the regeneration of damaged tissues, including those of wounds. Polymer systems containing bioactive molecules can play an important role in accelerating tissue regeneration, mitigating inflammation process, and fighting bacterial infection. Chitosan (CS) has attracted much attention regarding its use in wound healing system fabrication thanks to its biocompatibility, biodegradability, and the presence of functional groups in its structure. In this work, bioactive chitosan-based membranes were obtained by both chemical and physical modifications of the polymer with glycidyl methacrylate and glycerol (GLY), respectively. The most suitable GLY concentration to obtain wound healing systems with good elongation at break, a good water vapor transmission rate (WVTR), and good wettability values was 20% (w/w). Afterwards, the membranes were crosslinked with different concentrations of ethylene glycol dimethacrylate (EGDMA). By using a concentration of 0.05 mM EGDMA, membranes with a contact angle and WVTR values suitable for the application were obtained. To make the system bioactive, 3,4-dihydrocinnamic acid (HCAF) was introduced into the membranes, either by imbibition or chemical reaction, using laccase as a catalyst. Thermal and mechanical analyses confirmed the formation of a cohesive network, which limited the plasticizing effect of GLY, particularly when HCAF was chemically bound. The HCAF-imbibed membrane showed a good antioxidant and antimicrobial activity, highlighting the potential of this system for the treatment of wound healing.

An effective uranium removal using diversified synthesized cross-linked chitosan bis-aldehyde Schiff base derivatives from aqueous solutions

Three new cross-linked chitosan derivatives were yielded through intensification of chitosan with diverse types of bis-aldehydes. The prepared cross-linked chitosan was characterized by FTIR, 1H NMR, XRD, and TGA techniques. TGA indicated an improvement in thermal stability of the cross-linked chitosan compared with pure chitosan. Batch adsorption experiments showed that the three novel cross-linked chitosan bis-aldehyde derivatives possessed good adsorption capacity against U(VI) in the order of BFPA > BFB > BODB (adsorption capacity of the three adsorbents for U(VI) reaches 142, 124, and 114 mg/g respectively) and the adsorption isotherm and kinetic were well described by the Langmuir and the pseudo-second-order kinetic model, respectively. In addition, the prepared cross-linked chitosan bis-aldehyde derivatives were examined as U(VI) catcher from waste solutions.

Recent Advances and Prospects for Plant Gum-Based Drug Delivery Systems: A Comprehensive Review

This work is an effort to first introduce plant-based gums and discussing their drug delivery applications. The composition of these plant gums and their major characteristics, which make them suitable as pharmaceutical excipients are also described in detail. The various modifications methods such as physical and chemical modifications of gums and polysaccharides have been discussed along with their applications in different fields. Consequently, plant-based gums modification such as etherification and grafting is attracting much scientific attention to satisfy industrial demand. The evaluation tests to characterize gum-based drug delivery systems have been summarized. The release behavior of drug from plant-gum-based drug delivery is being discussed. Thus, this review is an attempt to critically summarize different aspect of plant-gum-based polysaccharides to be utilized in drug delivery systems having potential industrial applications.

Porous polymeric membranes: fabrication techniques and biomedical applications

Porous polymeric membranes have shown great potential in biological and biomedical applications such as tissue engineering, bioseparation, and biosensing, due to their structural flexibility, versatile surface chemistry, and biocompatibility. This review outlines the advantages and limitations of the fabrication techniques commonly used to produce porous polymeric membranes, with especial focus on those featuring nano/submicron scale pores, which include track etching, nanoimprinting, block-copolymer self-assembly, and electrospinning. Recent advances in membrane technology have been key to facilitate precise control of pore size, shape, density and surface properties. The review provides a critical overview of the main biological and biomedical applications of these porous polymeric membranes, especially focusing on drug delivery, tissue engineering, biosensing, and bioseparation. The effect of the membrane material and pore morphology on the role of the membranes for each specific application as well as the specific fabrication challenges, and future prospects of these membranes are thoroughly discussed.

An applied quantum-chemical model for genipin-crosslinked chitosan (GCS) nanocarrier

The genipin-crosslinked chitosan (GCS) nanocarrier has received a lot of attention due to its unique biological and chemical properties as an effective drug delivery system. GCS was modeled by considering two chitosan (CS) polymer sequences with six monomer units that are crosslinked by genipin. To investigate the characteristics of this model, we considered it as a nanocarrier of the anti-cancer drug cladribine (2CdA). Seven configurations of GCS and 2CdA (GCS/2CdA1-7) were optimized at M06-2X/6-31G(d,p) in aqueous solution. The average binding energy above 100 kJ mol^-1 indicates a high drug loading amount. The high adsorption of the drug on GCS is due to the hydrogen bonds that were investigated by AIM analysis. Hydrogen bonds also allow the drug to be released more slowly. These results were confirmed by experimental evidence and the comparison of this model with the simple model of one polymer chain. Also, the mechanism of GCS formation was investigated by calculating the activation parameters, which indicates that solvent (H₂O) molecules are explicitly involved in the formation of GCS.

A New Generation of Electrospun Fibers Containing Bioactive Glass Particles for Wound Healing

Chitosan fibers blended with polyethylene oxide (CHIT_PEO) and crosslinked with genipin were fabricated by electrospinning technique. Subsequently, CHIT_PEO bioactive glass composite electrospun mats were fabricated with the aim to achieve flexible structures with adequate mechanical properties and improved biological performance respect to CHIT_PEO fibers, for potential applications in wound healing. Three different compositions of bioactive glasses (BG) were selected and investigated: 45S5 BG, a Sr and Mg containing bioactive glass (BGMS10) and a Zn-containing bioactive glass (BGMS_2Zn). Particulate BGs (particles size < 20 μm) were separately added to the starting CHIT_PEO solution before electrospinning. The two recently developed bioactive glasses (BGMS10 and BGMS_2Zn) showed very promising biological properties in terms of bioactivity and cellular viability; thus, such compositions were added for the first time to CHIT_PEO solution to fabricate composite electrospun mats. The incorporation of bioactive glass particles and their distribution into CHIT_PEO fibers were assessed by SEM and FTIR analyses. Furthermore, CHIT_PEO composite electrospun mats showed improved mechanical properties in terms of Young’s Modulus compared to neat CHIT_PEO fibers; on the contrary, the values of tensile strain at break (%) were comparable. Biological performance in terms of cellular viability was investigated by means of WST-8 assay and CHIT_PEO composite electrospun mats showed cytocompatibility and the desired cellular viability.

Synergistic Antimicrobial Activity of a Nanopillar Surface on a Chitosan Hydrogel

Despite ongoing efforts and technology development, the contamination of medical device surfaces by disease-causing microbes remains problematic. Two approaches to producing antimicrobial surfaces are using antimicrobial materials and applying physical topography such as nanopatterns. In this work, we describe the use of physical topography on a soft hydrogel to control microbial growth. We demonstrate this approach by using chitosan hydrogel films with nanopillars having periodicities ranging from 300 to 500 nm. The flat hydrophilic chitosan films exhibit antimicrobial activity against the pathogenic bacteria Pseudomonas aeruginosa and filamentous fungi Fusarium oxysporum. The addition of nanopillars to the hydrogel surface further reduces the growth of P. aeruginosa and F. oxysporum up to ∼52 and ∼99%, respectively. Multiple modes of antimicrobial action appear to act synergistically to inhibit microbial growth on the nanopillar hydrogels. We verified that the strongly bactericidal and fungicidal nanopillared material retains biocompatibility to human epithelial cells with the MTT assay. The nanopillared material is a promising candidate for applications that require a biocompatible and antimicrobial film. The study demonstrates that taking advantage of multiple modes of antimicrobial action can effectively inhibit pathogenic microbial growth.

A new emulsification-crosslinking technique for preparation of physically crosslinked chitosan microspheres

A new emulsification-crosslinking method was developed for the preparation of chitosan microspheres. The new method uses an aqueous alkali–urea solution, instead of the commonly used acidic solvents, to dissolve chitosan. After emulsification, the water-in-oil droplets are solidified by heating, taking advantage of the unique in situ thermal gelling behavior of the alkaline chitosan solution, instead of by crosslinking with a usually toxic crosslinker. The size of the microspheres can be controlled by the concentration of chitosan solution, stirring speed, emulsifier concentration, and the curing temperature. The resulting microspheres are physically crosslinked, instead of chemically crosslinked, and they are ready to dissolve in dilute acetic acid. The resulting chitosan microspheres are non-toxic and can be degraded by lysozyme. Bovine serum albumin, a model protein, can be facilely loaded into the microspheres by adsorption, and then released from the microspheres.

Technologies and Formulation Design of Polysaccharide-Based Hydrogels for Drug Delivery

Polysaccharide-based hydrogel particles (PbHPs) are very promising carriers aiming to control and target the release of drugs with different physico-chemical properties. Such delivery systems can offer benefits through the proper encapsulation of many drugs (non-steroidal and steroidal anti-inflammatory drugs, antibiotics, etc) ensuring their proper release and targeting. This review discusses the different phases involved in the production of PbHPs in pharmaceutical technology, such as droplet formation (SOL phase), sol-gel transition of the droplets (GEL phase) and drying, as well as the different methods available for droplet production with a special focus on prilling technique. In addition, an overview of the various droplet gelation methods with particular emphasis on ionic cross-linking of several polysaccharides enabling the formation of particles with inner highly porous network or nanofibrillar structure is given. Moreover, a detailed survey of the different inner texture, in xerogels, cryogels or aerogels, each with specific arrangement and properties, which can be obtained with different drying methods, is presented. Various case studies are reported to highlight the most appropriate application of such systems in pharmaceutical field. We also describe the challenges to be faced for the breakthrough towards clinic studies and, finally, the market, focusing on the useful approach of safety-by-design (SbD).

Assessment of Cytocompatibility and Anti-Inflammatory (Inter)Actions of Genipin-Crosslinked Chitosan Powders

Chitosan is a polysaccharide commonly used, together with its derivatives, in the preparation of hydrogel formulations, scaffolds and films for tissue engineering applications. Chitosan can be used as such, but it is commonly stabilized by means of chemical crosslinkers. Genipin is one of the crosslinkers that has been considered that is a crystalline powder extracted from the fruit of Gardenia jasminoides and processed to obtain an aglycon compound. Genipin is gaining interest in biological applications because of its natural origin and anti-inflammatory actions. In this paper, the ability of chitosan-based materials crosslinked with genipin to exert anti-inflammation properties in applications such as bone regeneration was studied. Powders obtained from chitosan–genipin scaffolds have been tested in order to mimic the natural degradation processes occurring during biomaterials implantation in vivo. The results from osteoblast-like cells showed that specific combinations of chitosan and genipin stimulate high permissiveness towards cells, with higher performance than the pure chitosan. In parallel, evidences from monocyte-like cells showed that the crosslinker, genipin, seems to promote slowing of the monocyte-macrophage transition at morphological level. This suggests a sort of modularity of pro-inflammatory versus anti-inflammatory behavior of our chitosan-based biomaterials. Being both the cell types exposed to microscale powders, as an added value our results bring information on the cell–material interactions in the degradative dynamics of chitosan scaffold structures during the physiological resorption processes.

Influence of Genipin Crosslinking on the Properties of Chitosan-Based Films

Chitosan is a promising environment friendly active polymer packaging material due to its biodegradability, exceptional film forming capacity, great mechanical strength, appropriate barrier property along with intrinsic antioxidant and antimicrobial features. Bifunctional reagent was used for producing water insoluble chitosan films. Biopolymeric films crosslinked by Genipin (Gp), which is a reagent of natural origin, should have high potential in food packaging. The influence of the ratio of functional groups in the chitosan-Gp system on film absorption in the visible and ultraviolet regions of the spectrum, sorption, physical, and mechanical properties of the films has been studied. The degree of chitosan crosslinking in the films obtained from solutions containing Gp was estimated using the experimental data on film swelling and water vapor sorption isotherms. It is demonstrated that crosslinking with genipin improves swelling, water resistance, and mechanical properties of the films.

Recyclable Fully Biobased Chitosan Adsorbents Spray-Dried in One Pot to Microscopic Size and Enhanced Adsorption Capacity

A facile one-pot spray-drying process was developed for fabrication and in situ crosslinking of chitosan microspheres to improve the adsorption capacity by microscopic design. A fully biobased nature was achieved by utilizing genipin (GP) as a crosslinking agent and chitosan-derived nanographene oxide (nGO) as a property tuner. The produced chitosan microspheres were further proven as powerful adsorbents for common wastewater contaminants such as anionic dyes and pharmaceutical contaminants, here modeled by methyl orange (MO) and diclofenac sodium (DCF). By regulating the amount of GP and nGO, as well as by controlling the process parameters including the spray-drying inlet temperature and postheat treatment, the surface morphology, size, zeta potential, and adsorption efficiency of the microspheres could be tuned accordingly. The adsorption efficiency for MO and DCF reached 98.9 and 100%, respectively. The microspheres retained high DCF adsorption efficiency after six adsorption and desorption cycles, and the recyclability was improved by the incorporated nGO. The fabricated microspheres, thus, have great potential as reusable and eco-friendly adsorbents.

Evaluation of antibacterial textile covered by layer-by-layer coating and loaded with chlorhexidine for wound dressing application

The aim of this work is to design a wound dressing able to release chlorhexidine (CHX) as antiseptic agent, ensuring long-lasting antibacterial efficacy during the healing. The textile nonwoven (polyethylene terephthalate) (PET) of the dressing was first modified by chitosan (CHT) crosslinked with genipin (Gpn). Parameters such as the concentration of reagents (Gpn and CHT) but also the crosslinking time and the working temperature were optimized to reach the maximal positive charges surface density. This support was then treated by the layer-by-layer (LbL) deposition of a multilayer system composed of methyl-beta-cyclodextrin polymer (PCD) (anionic) and CHT (cationic). After a thermal treatment to stabilize the LbL film, the textiles were loaded with CHX as antiseptic agent. The influence of the thermal treatment i) on the cytocompatibility, ii) on the degradation of the multilayer system, iii) on CHX sorption and release profiles and iv) on the antibacterial activity of the loaded textiles was studied.

A General Strategy for Extrusion Bioprinting of Bio-Macromolecular Bioinks through Alginate-Templated Dual-Stage Crosslinking

The recently developed 3D bioprinting technology has greatly improved the ability to generate biomimetic tissues that are structurally and functionally relevant to their human counterparts. The selection of proper biomaterials as the bioinks is a key step toward successful bioprinting. For example, viscosity of a bioink is an important rheological parameter to determine the flexibility in deposition of free-standing structures and the maintenance of architectural integrity following bioprinting. This requirement, however, has greatly limited the selection of bioinks, especially for those naturally derived due to their commonly low mechanical properties. Here the generalization of a mechanism for extrusion bioprinting of bio-macromolecular components, mainly focusing on collagen and its derivatives including gelatin and gelatin methacryloyl, is reported. Specifically, a templating strategy is adopted using a composite bioink containing both the desired bio-macromolecular component and a polysaccharide alginate. The physically crosslinkable alginate component serves as the temporal structural support to stabilize the shape of the construct during bioprinting; upon subsequent chemical or physical crosslinking of the bio-macromolecular component, alginate can be selectively removed to leave only the desired bio-macromolecule. It is anticipated that this strategy is general, and can be readily expanded for use of a wide variety of other bio-macromolecular bioinks.

The effect of two different crosslinkers on in vitro characteristics of ciprofloxacin-loaded chitosan implants

The objective of this study was to determine and evaluate a controlled release implant of ciprofloxacin using bovine hydroxyapatite (BHA)-chitosan composite and glutaraldehyde or genipin as crosslinking agents. Ciprofloxacin implants were prepared using BHA, chitosan, ciprofloxacin at 30:60:10 and using three different concentrations of glutaraldehyde or genipin (0.3, 0.5, or 0.7%) as crosslinkers. Implants were formed as mini-tablet with 4.0 mm diameter weighing 100 mg using compression method. Further, the prepared ciprofloxacin implants were characterized for porosity, density, water absorption capacity, swelling, degradation, compressive strength, compatibility (Fourier transforms-infrared spectroscopy (FT-IR)), morphology (scanning electron microscope (SEM)), X-ray diffraction (X-RD), and in vitro drug release. The addition of glutaraldehyde or genipin as crosslinkers in ciprofloxacin implant showed controlled release profile of ciprofloxacin over a time period of 30 days. SEM photomicrograph revealed low porosity of the implant after crosslinking with glutaraldehyde or genipin. The FTIR study confirmed the formation of covalent imine bonds between chitosan and glutaraldehyde. Moreover, the addition of glutaraldehyde or genipin as crosslinkers caused a decrease in the mechanical strength of the implant. Increased concentration of glutaraldehyde or genipin reduced the crystallinity of BHA and chitosan, which were confirmed by X-RD studies. The results obtained from this study indicated that glutaraldehyde or genipin had the potential effect to retard ciprofloxacin release from BHA-chitosan-ciprofloxacin implant for 30 days.

Preparation of micro/nanopatterned gelatins crosslinked with genipin for biocompatible dental implants

Background: Collagen is a basic component of the periodontium and plays an important role in the function of the periodontal unit. Therefore, coating with collagen/gelatin has been applied to enable dental implants to positively interact with peri-implant tissues. Although the micro/nanoscale topography is an important property of the surface of dental implants, smaller collagen/gelatin surface patterns have not been sufficiently developed. Furthermore, only few reports on the behavior of cells on gelatin surfaces with different patterns and sizes exist. In this study, we developed micro/nanometer-scaled gelatin surfaces using genipin crosslinking, with the aim of understanding the use of patterning in surface modification of dental implants. Results: Grooves, holes, and pillars, with widths or diameters of 2 µm, 1 µm, or 500 nm were fabricated using a combination of molding and genipin crosslinking of gelatin. The stability of the different gelatin patterns could be controlled by the degree of genipin crosslinking. The gelatin patterns at 20 mM concentration of genipin and 41% crosslinking maintained a stable, patterned shape for at least 14 days in a cell culture medium. A cell morphology study showed that the cells on groves were aligned along the direction of the grooves. In contrast, the cells on pillars and holes exhibited randomly elongated filopodia. The vinculin spots of the cells were observed on the top of ridges and pillars or the upper surface of holes. The results of a cell attachment assay showed that the number of surface-attached cells increased with increasing patterning of the gelatin surface. Unlike the cell attachment assay, the results of a cell proliferation assay showed that Saos-2 cells prefer grooves with diameters of approximately 2 µm and 1 µm and pillars with diameters of 1 µm and heights of 500 nm. The number of cells on pillars with heights of 2 µm was larger than those of the other gelatin surface patterns tested. Conclusion: These data support that a detailed design of the gelatin surface pattern can control both cell attachment and proliferation of Saos-2 cells. Thus, gelatin surfaces patterned using genipin crosslinking are now an available option for biocompatible material patterning.

Preparation and characterization of microencapsulated DwPT trivalent vaccine using water soluble chitosan and its in-vitro and in-vivo immunological properties

The paper explained the microencapsulation of three different antigenic materials viz. Diphtheria toxoid (DT), whole cell pertussis antigens (PT and FHA) and tetanus toxoid (TT) by coacervation method using water soluble chitosan as a polymer crosslinked by vanillin/TPP co-crosslinkers for the development of oral trivalent DwPT vaccine. Instrumental characterization of chitosan microspheres suggested specific interaction with vanillin/TPP, higher thermal stability, amorphous nature, spherical morphology with size less than 2μm along with positive charge density offering mucoadhesive properties. Furthermore, PT and FHA showed higher encapsulation up to 94% followed by TT and DT. Cumulative release rate of DT was (68.47%), TT (73.67%), PT (43%) and FHA (53%). Release kinetics interpreted using DD solver program, indicated protein release followed first order kinetics and obeyed Korsmeyer-peppas model, stating fickian diffusion relates to diffusion, erosion and controlled release rate of the encapsulated toxoids. Application of formulations on caco-2 cell line showed negligible cytotoxic effect and efficient uptake of FITC labelled microspheres. The obtained in-vivo results suggests that the final trivalent DwPT formulation were having successful elicitation of both systemic (IgG) and mucosal (sIgA) immune response in balb/c mice. Overall studies indicated that DwPT formulation could be a suitable alternative to available injectable DaPT vaccine.

Accelerating effects of genipin-crosslinked small intestinal submucosa for defected gastric mucosa repair

Slow healing of gastric mucosa defects caused by endoscopic surgery is a common but severe clinical problem for lack of an effective treatment. Small intestinal submucosa (SIS) is a bio-derived extracellular matrix scaffold with remarkable repairing ability for soft tissue, but its rapid degradation and poor mechanical properties in the stomach environment limit its application for gastric mucosa regeneration. Herein, we modified SIS by genipin, a natural crosslinking agent, to improve its resistance against degradation in gastric juice and to promote the healing of gastric mucosa defects. The crosslinking characteristics of genipin-crosslinked SIS (GP-CR SIS) were evaluated by crosslinking degree, swelling ratio and FITR, respectively. GP-CR SIS was highly resistant to gastric juice digestion and had a great improvement in mechanical properties. Additionally, GP-CR SIS maintained excellent biocompatibility according to a cytotoxicity test, hemolysis test, and rat subcutaneous implant assay. In an in vivo study, we treated defected gastric mucosa with GP-CR SIS in a rabbit endoscopic submucosal dissection (ESD)-related ulcer model. After two weeks of surgical treatment, GP-CR SIS significantly expedited wound closure and ameliorated newly constructed tissue by providing a protective microenvironment for rapid granulation tissue formation and accelerating angiogenesis/re-epithelialization. In conclusion, this study demonstrates the huge therapeutic potential of GP-CR SIS scaffolds for accelerating defected gastric mucosa regeneration.

Extensively deacetylated high molecular weight chitosan from the multistep ultrasound-assisted deacetylation of beta-chitin

High intensity ultrasound irradiation was used to convert beta-chitin (BCHt) into chitosan (CHs). Typically, beta-chitin was suspended in 40% (w/w) aqueous sodium hydroxide at a ratio 1/10 (gmL(-1)) and then submitted to ultrasound-assisted deacetylation (USAD) during 50min at 60°C and a fixed irradiation surface intensity (52.6Wcm(-2)). Hydrogen nuclear magnetic resonance spectroscopy and capillary viscometry were used to determine the average degree of acetylation (DA‾) and viscosity average degree of polymerization (DPv‾), respectively, of the parent beta-chitin (DA‾=80.7%; DPv‾=6865) and USAD chitosans. A first USAD reaction resulted in chitosan CHs1 (DA‾=36.7%; DPv‾=5838). Chitosans CHs2 (DA‾=15.0%; DPv‾=5128) and CHs3 (DA‾=4.3%; DPv‾=4889) resulted after repeating the USAD procedure to CHs1 consecutively once and twice, respectively. Size-exclusion chromatography analyzes allowed the determination of the weight average molecular weight (Mw‾) and dispersity (Ð) of CHs1 (Mw‾=1,260,000gmol(-1); Ð=1.4), CHs2 (Mw‾=1,137,000gmol(-1); Ð=1.4) and CHs3 (Mw‾=912,000gmol(-1); Ð=1.3). Such results revealed that, thanks to the action of high intensity ultrasound irradiation, the USAD process allowed the preparation of unusually high molecular weight, randomly deacetylated chitosan, an important breakthrough to the development of new high grade chitosan-based materials displaying superior mechanical properties.

Tartrate/tripolyphosphate as co-crosslinker for water soluble chitosan used in protein antigens encapsulation

In drug delivery research, several toxic chemical crosslinkers and non-toxic ionic crosslinkers have been exploited for the synthesis of microparticles from acetic acid soluble chitosan. This paper hypothesized the implementation of sodium potassium tartrate (SPT) as an alternative crosslinker for sodium tripolyphosphate (TPP) and SPT/TPP co-crosslinkers for synthesis of the microparticles using water soluble chitosan (WSC) for encapsulation of Bovine serum albumin (BSA) as a model protein, and Tetanus toxoid (TT) as a model vaccine. The crosslinking was confirmed by FT-IR, SEM with EDS. The XRD entailed molecular dispersion of proteins and thermal analysis confirmed the higher stability of STP/TPP co-crosslinked formulations. The resultant microparticles were exhibiting crosslinking degree (52-67%), entrapment efficiency (72-80%), particle size (0.3-1.7μm), zeta potential (+24 to 46mV) and mucoadhesion (41-68%). The superiority of SPT over TPP was confirmed by higher crosslinking degree and entrapment efficiency. However, co-crosslinking were advantageous in higher regression values for Langmuir adsorption isotherm, slower swelling tendency and extended 30days controlled in-vitro release study. TT release obeyed the Quasi-Fickian diffusion mechanism for single and cocrosslinked formulations. Overall, in crosslinking of chitosan as biological macromolecules, STP/TPP may be alternative for single ionic crosslinked formulations for protein antigen delivery.

Evaluation of polypropylene mesh coated with biological hydrogels for temporary closure of open abdomen

Polypropylene mesh, as a temporary abdominal closure device, may cause mechanical intestine injury and inflammatory response. Chitosan/gelatin hydrogel has excellent biocompatibility, soft and elastic properties. This work is to assess the effects of the chitosan/gelatin hydrogel coated polypropylene mesh on open abdomen wounds. Histological analysis and detection of healing-related factors were conducted to evaluate the inflammation and wound healing process. After 1-day implantation in a murine model of open abdomen, the coated polypropylene mesh, compared with simple polypropylene mesh, demonstrated well protection of the intestine serosa. After 14-day implantation, it reduced the inflammation response by down-regulating the cytokines interleukin-6 and tumor necrosis factor-α, and up-regulating the anti-inflammatory factor interleukin-10. Meanwhile, the composite stimulated granulation tissue growth, and promoted matrix deposition and angiogenesis after 7 and 14 days. In conclusion, the modified temporary abdominal closure composite could significantly protect the intestines from mechanical damage and accelerate wound healing.

Biodegradable Polymer Membranes Applied in Guided Bone/Tissue Regeneration: A Review

Polymer membranes have been widely used in guided tissue regeneration (GTR) and guided bone regeneration (GBR). In this review, various commercially available membranes are described. Much attention is paid to the recent development of biodegradable polymers applied in GTR and GBR, and the important issues of biodegradable polymeric membranes, including their classification, latest experimental research and clinical applications, as well as their main challenges are addressed. Herein, natural polymers, synthetic polymers and their blends are all introduced. Pure polymer membranes are biodegradable and biocompatible, but they lack special properties such as antibacterial properties, osteoconductivity, and thus polymer membranes loaded with functional materials such as antibacterial agents and growth factors show many more advantages and have also been introduced in this review. Despite there still being complaints about polymer membranes, such as their low mechanical properties, uncontrollable degradation speed and some other drawbacks, these problems will undoubtedly be conquered and biodegradable polymers will have more applications in GTR and GBR.