Application of a calcium and phosphorus biomineralization strategy in tooth repair: a systematic review

Biomineralization is a natural process in which organisms regulate the growth of inorganic minerals to form biominerals with unique layered structures, such as bones and teeth, primarily composed of calcium and phosphorus. Tooth decay significantly impacts our daily lives, and the key to tooth regeneration lies in restoring teeth through biomimetic approaches, utilizing mineralization strategies or materials that mimic natural processes. This review delves into the types, properties, and transformations of calcium and phosphorus minerals, followed by an exploration of the mechanisms behind physiological and pathological mineralization in living organisms. It summarizes the mechanisms and commonalities of biomineralization and discusses the advancements in dental biomineralization research, guided by insights into calcium and phosphorus mineral biomineralization. This review concludes by addressing the current challenges and future directions in the field of dental biomimetic mineralization.

Peptide-Based Biomaterials for Bone and Cartilage Regeneration

The healing of osteochondral defects (OCDs) that result from injury, osteochondritis, or osteoarthritis and bear lesions in the cartilage and bone, pain, and loss of joint function in middle- and old-age individuals presents challenges to clinical practitioners because of non-regenerative cartilage and the limitations of current therapies. Bioactive peptide-based osteochondral (OC) tissue regeneration is becoming more popular because it does not have the immunogenicity, misfolding, or denaturation problems associated with original proteins. Periodically, reviews are published on the regeneration of bone and cartilage separately; however, none of them addressed the simultaneous healing of these tissues in the complicated heterogeneous environment of the osteochondral (OC) interface. As regulators of cell adhesion, proliferation, differentiation, angiogenesis, immunomodulation, and antibacterial activity, potential therapeutic strategies for OCDs utilizing bone and cartilage-specific peptides should be examined and investigated. The main goal of this review was to study how they contribute to the healing of OCDs, either alone or in conjunction with other peptides and biomaterials.

Remineralization effects of enamel binding peptide, WGNYAYK, on enamel subsurface demineralization in vitro. Enamel binding peptide, WGNYAYK effect remineralization of enamel

Objectives: We investigated remineralization effects of enamel binding peptide (EBP), WGNYAYK, on enamel subsurface demineralization in vitro.Methods: Bovine lower incisor crowns were used as subsurface enamel demineralization samples, and changes of EBP binding, remineraliztion rate, hardness and microstructure were investigated. Binding of EBP, remineralization rate, hardness and structural changes were investigated. Fluorescein isothiocyatate (FITC)-labeled EBPs (0.4 mM, 4.0 mM, and 7.0 mM) were applied to the samples for 30 min at 37 °C, with sample surfaces and cross-sections observed by confocal laser scanning microscope (CLSM). Mineralization analysis samples were divided into 4 experimental groups; distilled water (DW), EBP 0.4 mM, EBP 4.0 mM, and EBP 7.0 mM. Mineral density changes were measured by micro-CT with hardness measured by nano-indentation. Samples were also observed by scanning electron microscope (SEM) for surface and longitudinal microstructure.

Results

CLSM images indicated that increased fluorescence was observed in the surface layer and up to about 20 μm below the surface layer. The remineralization rate was significantly higher for EBP 7.0 mM compared to DW (p = 0.008). Enamel surface hardness was significantly higher in all EBP groups compared to DW (p < 0.05) and was highest in the 7.0 mM group. SEM images showed obscuring of the superficial columnar structure in the 7.0 mM EBP group, indicating subsurface crystalline structure recovery.

Conclusion

The results of this study suggest that EBP binds to demineralized enamel and promotes remineralization.

Unveiling the mechanism of an amelogenin-derived peptide in promoting enamel biomimetic remineralization

Amelogenin and its derived peptides have exhibited excellent efficacy in promoting enamel biomimetic remineralization. However, little is known about their specific action mechanisms. Herein, by combining experiments and computer simulation, the mechanism of an amelogenin-derived peptide QP5 in regulating enamel biomimetic remineralization is unveiled for the first time. In experiments, peptide QP5 was separated into (QPX)5 and C-tail domains, the interactions of peptide-minerals in nucleation solution and the regulation of peptide on enamel biomimetic remineralization were explored. QP5 exhibited an unordered conformation when mineral ions existed, and it could adsorb on minerals through its two domains, thereby inhibiting spontaneous nucleation. The remineralized enamel regulated by C-tail showed better mechanical properties and formed more biomimetic crystals than that of (QPX)5, indicating the C-tail domain of QP5 played an important role in forming enamel-like crystals. The simulation results showed that the conformation of QP5 changed greatly, mainly exhibiting β-bend, β-turn, and coil structures, and it eventually adsorbed on enamel through negatively charged residues of the C-tail domain, then captured Ca2+ from solution to promote enamel remineralization. This study improved the evaluation methods of the mechanism of biomimetic peptides, and laid a theoretical basis for the amelioration and clinical transformation of peptide QP5.

The remineralization effect of GERM CLEAN on early human enamel caries lesions in vitro

This study aimed to evaluate the remineralization effect of GERM CLEAN, a novel antibacterial peptide, on early enamel caries. Thirty human enamel blocks from thirty teeth were randomly divided into three groups: double distilled water (DDW group), GERM CLEAN (GC group), and 1000 ppm fluoride (NaF group). Specimens were demineralized for 3 days (pH 4.6) followed by pH cycling twice daily for 14 days. For a pH cycle, specimens received corresponding treatments for 5 min, then were immersed in demineralizing solution for 1 h, received corresponding treatments again, and finally were immersed in remineralizing solution (pH 7.0) for approximately 11 h. Specimens were washed with DDW after each treatment. Microindentation tests, atomic force microscopy (AFM), and transverse micro-radiography (TMR) were conducted to analyze enamel blocks. GC demonstrated a lower percentage of surface microhardness recovery (SMHR%) (p < 0.0001), rougher surfaces (p < 0.0001), deeper lesion depth (p = 0.001), and more mineral loss (p = 0.001) than NaF, but showed higher SMHR% (p < 0.0001), smoother surfaces (p < 0.0001), shallower lesion depth (p = 0.049), and less mineral loss (p = 0.001) than DDW. As a result, GERM CLEAN has the potential to promote the remineralization of demineralized enamel.

Peptide Designs for Use in Caries Management: A Systematic Review

The objective of this study was to review the design methods that have been used to create peptides for use in caries management. Two independent researchers systematically reviewed many in vitro studies in which peptides were designed for use in caries management. They assessed the risk of bias in the included studies. This review identified 3592 publications, of which 62 were selected. Forty-seven studies reported 57 antimicrobial peptides. Among them, 31 studies (66%, 31/47) used the template-based design method; 9 studies (19%, 9/47) used the conjugation method; and 7 studies (15%, 7/47) used other methods, such as the synthetic combinatorial technology method, the de novo design method and cyclisation. Ten studies reported mineralising peptides. Seven of these (70%, 7/10) used the template-based design method, two (20%, 2/10) used the de novo design method, and one study (10%, 1/10) used the conjugation method. In addition, five studies developed their own peptides with antimicrobial and mineralising properties. These studies used the conjugation method. Our assessment for the risk of bias in the 62 reviewed studies showed that 44 publications (71%, 44/62) had a medium risk and that 3 publications had a low risk (5%, 3/62). The two most common methods for developing peptides for use in caries management that were used in these studies were the template-based design method and the conjugation method.

Peptides in Dentistry: A Scoping Review

Currently, it remains unclear which specific peptides could be appropriate for applications in different fields of dentistry. The aim of this scoping review was to scan the contemporary scientific papers related to the types, uses and applications of peptides in dentistry at the moment. Literature database searches were performed in the following databases: PubMed/MEDLINE, Scopus, Web of Science, Embase, and Scielo. A total of 133 articles involving the use of peptides in dentistry-related applications were included. The studies involved experimental designs in animals, microorganisms, or cells; clinical trials were also identified within this review. Most of the applications of peptides included caries management, implant osseointegration, guided tissue regeneration, vital pulp therapy, antimicrobial activity, enamel remineralization, periodontal therapy, the surface modification of tooth implants, and the modification of other restorative materials such as dental adhesives and denture base resins. The in vitro and in vivo studies included in this review suggested that peptides may have beneficial effects for treating early carious lesions, promoting cell adhesion, enhancing the adhesion strength of dental implants, and in tissue engineering as healthy promotors of the periodontium and antimicrobial agents. The lack of clinical trials should be highlighted, leaving a wide space available for the investigation of peptides in dentistry.

Applications of scanning electron microscopy and focused ion beam milling in dental research

The abilities of scanning electron microscopy (SEM) and focused ion beam (FIB) milling for obtaining high-resolution images from top surfaces, cross-sectional surfaces, and even in three dimensions, are becoming increasingly important for imaging and analyzing tooth structures such as enamel and dentin. FIB was originally developed for material research in the semiconductor industry. However, use of SEM/FIB has been growing recently in dental research due to the versatility of dual platform instruments that can be used as a milling device to obtain low-artifact cross-sections of samples combined with high-resolution images. The advent of the SEM/FIB system and accessories may offer access to previously inaccessible length scales for characterizing tooth structures for dental research, opening exciting opportunities to address many central questions in dental research. New discoveries and fundamental breakthroughs in understanding are likely to follow. This review covers the applications, key findings, and future direction of SEM/FIB in dental research in morphology imaging, specimen preparation for transmission electron microscopy (TEM) analysis, and three-dimensional volume imaging using SEM/FIB tomography.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

Cell-Free Biomimetic Mineralization Strategies to Regenerate the Enamel Microstructure

The distinct architecture of native enamel gives it its exquisite appearance and excellent intrinsic-extrinsic fracture toughening properties. However, damage to the enamel is irreversible. At present, the clinical treatment for enamel lesion is an invasive method; besides, its limitations, caused by the chemical and physical difference between restorative materials and dental hard tissue, makes the restorative effects far from ideal. With more investigations on the mechanism of amelogenesis, biomimetic mineralization techniques for enamel regeneration have been well developed, which hold great promise as a non-invasive strategy for enamel restoration. This review disclosed the chemical and physical mechanism of amelogenesis; meanwhile, it overviewed and summarized studies involving the regeneration of enamel microstructure in cell-free biomineralization approaches, which could bring new prospects for resolving the challenges in enamel regeneration.

Dentin remineralization in acidic solution without initial calcium phosphate ions via poly(amido amine) and calcium phosphate nanocomposites after fluid challenges

OBJECTIVES

A previous study showed that the combination of poly(amido amine) (PAMAM) and rechargeable composites with nanoparticles of amorphous calcium phosphate (NACP) induced dentin remineralization in an acidic solution with no initial calcium (Ca) and phosphate (P) ions, mimicking the oral condition of individuals with dry mouths. However, the frequent fluid challenge in the oral cavity may decrease the remineralization capacity. Therefore, the objective of the present study was to investigate the remineralization efficacy on dentin in an acid solution via PAMAM + NACP after fluid challenges for the first time.

METHODS

The NACP nanocomposite was stored in a pH 4 solution for 77 days to exhaust its Ca and P ions and then recharged. Demineralized dentin samples were divided into four groups: (1) control dentin, (2) dentin coated with PAMAM, (3) dentin with recharged NACP composite, and (4) dentin with PAMAM + recharged NACP. PAMAM-coated dentin was shaken in phosphate-buffered saline for 77 days to desorb PAMAM from dentin. Samples were treated in pH 4 lactic acid with no initial Ca and P ions for 42 days.

RESULTS

After 77 days of fluid challenge, PAMAM failed to prevent dentin demineralization in lactic acid. The recharged NACP nanocomposite raised the pH to above 6.5 and re-released more than 6.0 and 4.0 mmol/L Ca and P ions daily, respectively, which inhibited further demineralization. In contrast, the PAMAM + NACP combined method induced great dentin remineralization and restored the dentin microhardness to 0.54 ± 0.04 GPa, which approached that of sound dentin (P = 0.426, P > 0.05).

CONCLUSIONS

The PAMAM + NACP combination achieved dentin remineralization in an acid solution with no initial Ca and P ions, even after severe fluid challenges.

CLINICAL RELEVANCE

The novel PAMAM + NACP has a strong and sustained remineralization capability to inhibit secondary caries, even for individuals with dry mouths.

A Novel Strategy for Caries Management: Constructing an Antibiofouling and Mineralizing Dual-Bioactive Tooth Surface

Existing single-functional agents against dental caries are inadequate in antibacterial performance or mineralization balance. This problem can be resolved through a novel strategy, namely, the construction of an antibiofouling and mineralizing dual-bioactive tooth surface by grafting a dentotropic moiety to an antimicrobial peptide. The constructed bioactive peptide can strongly adsorb onto the tooth surface and has beneficial functions in a myriad of ways. It inhibits cariogenic bacteria Streptococcus mutans adhesion, kills planktonic S. mutans, and destroys the S. mutans biofilm on the tooth surface. It also protects teeth from demineralization in acidic environments, and induces self-healing regeneration in the remineralization environment. Molecular dynamics simulations elucidate the main adsorption mechanism that the positively charged amino acid residues in the bioactive peptide bind to phosphate groups on the tooth surface, and the main mineralization mechanism that the negative charges on the outermost layer of the bioactive peptide repel acetic acid ions and attract calcium ions as nucleation sites for remineralization. This study suggests that this in-house synthesized dual-bioactive peptide is a promising functional agent to prevent dental caries, and is effective in inducing in situ self-healing remineralization for the treatment of decayed teeth.

Remineralization of enamel caries by an amelogenin-derived peptide and fluoride in vitro

Dental caries is one of the most common oral diseases in the world. This study was tantamount to investigate the combinatory effects of an amelogenin-derived peptide (called QP5) and fluoride on the remineralization of artificial enamel caries. The peptide QP5 was synthesized and characterized, and the binding capability of the peptide on hydroxyapatite (HA) and demineralized tooth enamel surface was analysed. Then, the mineralization function of the peptide and fluoride was studied through the spontaneous mineralization testing and remineralization on enamel caries in vitro. First, the novel peptide QP5 could bind on the hydroxyapatite and demineralized tooth enamel surfaces. Second, QP5 can transitorily stabilize the formation of amorphous calcium phosphate and direct the transformation into hydroxyapatite crystals alone and in combination with fluoride. In addition, compared to blocks treated by peptide QP5 alone or fluoride, the sample blocks showed significantly higher surface microhardness, lower mineral loss and shallower lesion depth after treatment with a combination of QP5 and fluoride at high or low concentrations. The peptide QP5 could control the crystallization of hydroxyapatite, and combinatory application of peptide QP5 and fluoride had a potential synergistic effect on the remineralization of enamel caries.

Enamel Repair with Amorphous Ceramics

Developing high-performance materials in physiological conditions to clinically repair stiff tissue for long lifespan remains a great challenge. Here, an enamel repair strategy is reported by efficiently growing a biocompatible ZrO₂ ceramic layer on defective enamel through controllable hydrolysis of Zr⁴⁺ in oral-tolerable conditions. Detailed analysis of the grown layer indicates that the grown ZrO₂ ceramic is amorphous without grain boundary and dislocation, which endows the repaired enamel with natural enamel comparable mechanical performance (modulus ≈82.5 GPa and hardness ≈5.2 GPa). Besides, the strong chemical connection between unsaturated coordinated Zr⁴⁺ in amorphous structure and PO₄ ^3- greatly strengthen the crystalline-amorphous interface of the repaired enamel to endure the long-time mastication damage. Moreover, these ZrO₂ ceramics provide hydrophilic, electronegative, and smooth surfaces to resist the adhesion and proliferation of cariogenic bacteria. The hybrid amorphous-crystalline interface design with advantages in biomechanical compatibility would promote the evolution of a variety of cutting-edge functional materials for medical and engineering application.

The Significance and Utilisation of Biomimetic and Bioinspired Strategies in the Field of Biomedical Material Engineering: The Case of Calcium Phosphat-Protein Template Constructs

This review provides a summary of recent research on biomimetic and bioinspired strategies applied in the field of biomedical material engineering and focusing particularly on calcium phosphate-protein template constructs inspired by biomineralisation. A description of and discussion on the biomineralisation process is followed by a general summary of the application of the biomimetic and bioinspired strategies in the fields of biomedical material engineering and regenerative medicine. Particular attention is devoted to the description of individual peptides and proteins that serve as templates for the biomimetic mineralisation of calcium phosphate. Moreover, the review also presents a description of smart devices including delivery systems and constructs with specific functions. The paper concludes with a summary of and discussion on potential future developments in this field.

The effects of 8DSS peptide on remineralization in a rat model of enamel caries evaluated by two nondestructive techniques

Nowadays, dental caries is one of the most common oral health problems, affecting most individuals. It has been found that, by remineralizing enamel at an early stage in the formation of enamel caries, teeth can be effectively protected from dental caries. In this work, a peptide with eight repetitive sequences of aspartate-serine-serine (8DSS) is applied as the bio-mineralizer in an in-vivo rat enamel caries model. Nondestructive quantitative light-induced fluorescence-digital (QLF-D) imaging and micro-computed tomography (micro-CT) are used to evaluate the remineralization of enamel carious lesions by measuring the total fluorescence radiance loss of the molar area (Δ Q_Total), acquired using QLF-D imaging, and the mineral density and residual molar enamel volume, acquired using micro-CT. Correlations are explored between Δ Q_Total and mineral density (strong correlation, r = 0.8000, p < 0.001) and Δ Q_Total and residual molar enamel volume (moderate correlation, r = 0.6375, p < 0.001). Our results demonstrate that 8DSS is a promising in-vivo remineralization agent that exhibits comparable effects to NaF ( p < 0.05), which has been verified using the classical Keyes method. Moreover, the nondestructive QLF-D and micro-CT methods can be combined to quantify the remineralization of enamel carious lesions three-dimensionally in vivo, making them broadly applicable in quantifying hard tissues.

Repair of dentine-related lesions without a drill or injection

For covering the shortages of traditional treatments, a novel and non-invasive system was developed with the simple adaption of nature's own repair process, while an extrinsic electric field was introduced to improve its remineralization kinetics. In an in vivo study, acid-etched rabbit dentine was used to evaluate the remineralization efficacy and safety of the system. The exposed dentine tubules were fully occluded after 5 hours/1.0 mA and 8 hours/0.5 mA of remineralization. After 5 hours of remineralization (1.0 mA), the micro-hardness of the demineralized dentine was fully recovered, equal to native rabbit dentine. Haematoxylin–eosin staining demonstrated no obvious inflammatory reaction. This study provides a feasible solution to realize rapid repair of dentine.

For covering the shortages of traditional treatments, a novel and non-invasive system was developed with the simple adaption of nature's own repair process, while an extrinsic electric field was introduced to improve its remineralization kinetics.

Poly(amido amine) and rechargeable adhesive containing calcium phosphate nanoparticles for long-term dentin remineralization

OBJECTIVES

The objective of the present study was to investigate long-term dentin remineralization via the combination of poly(amido amine) (PAMAM) with a novel rechargeable adhesive containing nanoparticles of amorphous calcium phosphate (NACP).

METHODS

The NACP adhesive was immersed in lactic acid at pH 4 to exhaust its calcium (Ca) and phosphate (P) ion release, and then recharged with Ca and P ions. Dentin samples were pre-demineralized with 37% phosphoric acid, and then divided into four groups: (1) dentin control, (2) dentin treated with PAMAM, (3) dentin with recharged NACP adhesive, (4) dentin with PAMAM + recharged NACP adhesive. In group (2) and (4), the PAMAM-coated dentin was immersed in phosphate-buffered saline with vigorous shaking for 77 days to accelerate any detachment of the PAMAM macromolecules from the demineralized dentin. Samples were treated with a cyclic remineralization/demineralization regimen for 21 days.

RESULTS

After 77 days of fluid flow challenge, the immersed PAMAM still retained its nucleation template function. The recharged NACP adhesive possessed sustained ion re-release and acid-neutralization capability, both of which did not decrease with repeated recharge and re-release cycles. The immersed PAMAM with the recharged NACP adhesive achieved long-term dentin remineralization, and restored dentin hardness to that of healthy dentin.

CONCLUSIONS

The PAMAM + NACP adhesive completely remineralizes pre-demineralized dentin even after long-term fluid challenges and provides long-term remineralization to protect tooth structures.

CLINICAL SIGNIFICANCE

The novel PAMAM + NACP adhesive provides long-term bond protection and caries inhibition to increase the longevity of resin-based restorations.

State of the Art Enamel Remineralization Systems: The Next Frontier in Caries Management

The principles of minimally invasive dentistry clearly dictate the need for clinically effective measures to remineralize early enamel caries lesions. While fluoride-mediated remineralization is the cornerstone of current caries management philosophies, a number of new remineralization strategies have been commercialized or are under development that claim to promote deeper remineralization of lesions, reduce the potential risks associated with high-fluoride oral care products, and facilitate caries control over a lifetime. These non-fluoride remineralizing systems can be broadly categorized into biomimetic enamel regenerative technologies and the approaches that repair caries lesions by enhancing fluoride efficacy. This paper discusses the rationale for non-fluoride remineralization and the mechanism of action, challenges, and evidence behind some of the most promising advances in enamel remineralization therapies.

Bioinspired heptapeptides as functionalized mineralization inducers with enhanced hydroxyapatite affinity

The regeneration of mineral crystals under physiological conditions is an efficient way to repair defects in hard tissues. To achieve robust mineralization on surfaces such as the tooth enamel, an inducer requires strong affinity with the substrates and should be able to induce mineralization. Thus far, most studies used a single molecule containing two components to realize the above functions separately, which might be troublesome to synthesize and purify. In this work, inspired by the statherin in the salivary acquired pellicle, we designed a simple peptide sequence, Asp-Asp-Asp-Glu-Glu-Lys-Cys (peptide-7), to accomplish the dual tasks of adsorption and mineralization on enamel surfaces. We speculate the calcium binding ability of the negatively charged carboxylic acid groups in the peptide itself contributes to the dual functions of peptide-7. In vitro and in vivo experiments demonstrated its excellent repair effect on enamel as compared to fluoride. More importantly, due to the strong affinity between peptides and hydroxyapatite, a compact mineralized crystal layer and a strong adhesion between the regenerated minerals and the bottom substrates were observed, similar to the effect induced by fluoride. This work sheds light on the interaction mechanism between peptide-7 and minerals. In addition, since it is safer than fluoride, peptide-7 may have potential applications in the repair of other hard tissues and the functionalization of biomaterials.

Anti-biofilm and remineralization effects of chitosan hydrogel containing amelogenin-derived peptide on initial caries lesions

In this study, we have designed a more clinically powerful anti-caries treatment by applying the amelogenin-derived peptide QP5 to the antibacterial carrier material chitosan in a hydrogel (CS-QP5 hydrogel), and characterized its effects on the inhibition of a cariogenic biofilm and the promotion of the remineralization of the initial caries lesions. The results indicated that the CS-QP5 hydrogel sustainably inhibited the growth of the Streptococcus mutans biofilm, lactic acid production and the metabolic activity over a prolonged period of time. Moreover, the CS-QP5 hydrogel promoted the remineralization of early enamel lesions, which were indicated by surface micro-hardness (, polarized light microscopy and transverse microradiography. In conclusion, the CS-QP5 hydrogel shows good potential for caries control in the clinic because of its antibacterial effects as well as the remineralization of initial enamel carious lesions even in a biofilm model over a prolonged period of time.

Poly (amido amine) dendrimer and dental adhesive with calcium phosphate nanoparticles remineralized dentin in lactic acid

Patients with dry mouth often have an acidic oral environment lacking saliva to provide calcium (Ca) and phosphate (P) ions. There has been no report on tooth remineralization in acidic pH4 and CaP ion-lacking solutions. The objective of this study was to develop a novel method of combining poly(amido amine) (PAMAM) with adhesive containing nanoparticles of amorphous calcium phosphate (NACP) for dentin remineralization in pH4 and CaP-lacking solution for the first time. Demineralized dentin was tested in four groups: (1) dentin control, (2) dentin with PAMAM, (3) dentin with NACP adhesive, (4) dentin with PAMAM + NACP adhesive. Dentin samples were examined by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and hardness testing. Increasing the NACP filler level in adhesive from 0 to 40 wt% did not negatively affect the dentin bond strength (p > 0.1). NACP adhesive released CaP ions and neutralized the acid. PAMAM alone failed to achieve dentin remineralization in lactic acid. NACP alone induced slight dentin remineralization in lactic acid (p > 0.1). In contrast, the novel PAMAM + NACP group in the pH4 and CaP-lacking solution completely remineralized the predemineralized dentin, increasing its hardness which approached that of healthy dentin (p > 0.1). In conclusion, dentin remineralization via PAMAM + NACP adhesive in pH4 and CaP-lacking acid was achieved for the first time, when conventional remineralization methods such as PAMAM or NACP did not work. The novel PAMAM + NACP method is promising to increase the longevity of the composite-tooth bond, inhibit caries, remineralize lesions and protect tooth structures, even for patients with dry mouth and an acidic oral environment. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2414-2424, 2018.

Poly(amido amine) and calcium phosphate nanocomposite remineralization of dentin in acidic solution without calcium phosphate ions

OBJECTIVE

Patients with dry mouth often have an acidic oral environment lacking saliva that provides calcium (Ca) and phosphate (P) ions. However, there has been no study on dentin remineralization by placing samples in an acidic solution without Ca and P ions. Previous studies used saliva-like solutions with neutral pH and Ca and P ions. Therefore, the objective of this study was to investigate a novel method of combining poly(amido amine) (PAMAM) with a composite of nanoparticles of amorphous calcium phosphate (NACP) on dentin remineralization in an acidic solution without Ca and P ions for the first time.

METHODS

Demineralized dentin specimens were tested into four groups: (1) dentin control, (2) dentin coated with PAMAM, (3) dentin with NACP nanocomposite, (4) dentin with PAMAM plus NACP composite. Specimens were treated with lactic acid at pH 4 without initial Ca and P ions for 21 days. Acid neutralization and Ca and P ion concentrations were measured. Dentin specimens were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and hardness testing vs. remineralization efficacy.

RESULTS

NACP composite had mechanical properties similar to commercial control composites (p>0.1). NACP composite neutralized acid and released Ca and P ions. PAMAM alone failed to induce dentin remineralization. NACP alone achieved mild remineralization and slightly increased dentin hardness at 21days (p>0.1). In contrast, the PAMAM+NACP nanocomposite method in acid solution without initial Ca and P ions greatly remineralized the pre-demineralized dentin, restoring its hardness to approach that of healthy dentin (p>0.1).

SIGNIFICANCE

Dentin remineralization via PAMAM+NACP in pH 4 acid without initial Ca and P ions was demonstrated for the first time, when conventional methods such as PAMAM did not work. The novel PAMAM+NACP nanocomposite method is promising to protect tooth structures, especially for patients with reduced saliva to inhibit caries.

Biomineralization: From Material Tactics to Biological Strategy

Biomineralization is an important tactic by which biological organisms produce hierarchically structured minerals with marvellous functions. Biomineralization studies typically focus on the mediation function of organic matrices on inorganic minerals, which helps scientists to design and synthesize bioinspired functional materials. However, the presence of inorganic minerals may also alter the native behaviours of organic matrices and even biological organisms. This progress report discusses the latest achievements relating to biomineralization mechanisms, the manufacturing of biomimetic materials and relevant applications in biological and biomedical fields. In particular, biomineralized vaccines and algae with improved thermostability and photosynthesis, respectively, demonstrate that biomineralization is a strategy for organism evolution via the rational design of organism-material complexes. The successful modification of biological systems using materials is based on the regulatory effect of inorganic materials on organic organisms, which is another aspect of biomineralization control. Unlike previous studies, this study integrates materials and biological science to achieve a more comprehensive view of the mechanisms and applications of biomineralization.

Phosphorylation regulates the secondary structure and function of dentin phosphoprotein peptides

Dentin phosphoprotein (DPP) is the most acidic protein in vertebrates and structurally is classified as an intrinsically disordered protein. Functionally, DPP is related to dentin and bone formation, however the specifics of such association remain unknown. Here, we used atomistic molecular dynamics simulations to screen selected binding domains of DPP onto hydroxyapatite (HA), which is one of its important interacting partners. From these results, we selected a functionally relevant peptide, Ace-SSDSSDSSDSSDSSD-NH2 (named P5) and its phosphorylated form (named P5P), for experimental characterization. SAXS experiments indicated that in solution P5 was disordered, possibly in an extended conformation while P5P displayed more compact globular conformations. Circular dichroism and FTIR confirmed that, either in the presence or absence of Ca2+/HA, P5 adopts a random coil structure, whereas its phosphorylated counterpart, P5P, has a more compact arrangement associated with conformations that display β-sheet and α-helix motifs when bound to HA. In solution, P5 inhibited HA crystal growth, whereas at similar concentrations, P5P stimulated it. These findings suggest that phosphorylation controls the transient formation of secondary and tertiary structure of DPP peptides, and, most likely of DPP itself, which in turn controls HA growth in solution and possibly HA growth in mineralized tissues.

From molecules to macrostructures: recent development of bioinspired hard tissue repair

This review summarizes the bioinspired strategies for hard tissue repair, ranging from molecule-induced mineralization, to microscale assembly to macroscaffold fabrication.

Synergistic Inhibition of Enamel Demineralization by Peptide 8DSS and Fluoride

The biomimetic peptide 8DSS has shown beneficial effects in promoting remineralization of demineralized enamel in vitro. Here we examined the ability of 8DSS alone and in combination with fluoride to inhibit enamel demineralization during pH-cycling mimicking intraoral conditions. Enamel blocks were subjected to 9 days of pH-cycling in the presence of 1,000 ppm NaF (positive control), distilled-deionized water (DDW; negative control), 25 μM 8DSS alone, 25 μM 8DSS with 500 ppm NaF (8DSS-FL) or 25 μM 8DSS with 1,000 ppm NaF (8DSS-FH) twice daily for 1 min each time. The blocks were analyzed in terms of surface microhardness (SMH), fluoride uptake and mineral content. The 8DSS-treated blocks showed significantly lower mineral loss, shallower lesions and higher SMH than the DDW-treated blocks. No significant differences were observed between the blocks treated with 8DSS alone or fluoride alone. The blocks treated with 8DSS alone or DDW showed similar amounts of fluoride uptake, which was the lowest of all the treatment groups. The blocks treated with 8DSS-FL or 8DSS-FH did not differ significantly, and both groups showed significantly greater SMH and fluoride uptake as well as significantly lower mineral loss and shallower lesions than the NaF-treated blocks. Mineral content was significantly higher in the 8DSS-treated blocks than in the DDW-treated blocks from the surface layer (10 µm) to the lesion depth (110 µm), and it was significantly higher in the blocks treated with 8DSS-FL or 8DSS-FH than in the NaF-treated blocks from 10 to 90 µm. These findings illustrate the potential of 8DSS for inhibiting enamel demineralization and for enhancing the anticaries effect of NaF.

Amelogenin and Enamel Biomimetics

Mature tooth enamel is acellular and does not regenerate itself. Developing technologies that rebuild tooth enamel and preserve tooth structure is therefore of great interest. Considering the importance of amelogenin protein in dental enamel formation, its ability to control apatite mineralization in vitro, and its potential to be applied in fabrication of future bio-inspired dental material this review focuses on two major subjects: amelogenin and enamel biomimetics. We review the most recent findings on amelogenin secondary and tertiary structural properties with a focus on its interactions with different targets including other enamel proteins, apatite mineral, and phospholipids. Following a brief overview of enamel hierarchical structure and its mechanical properties we will present the state-of-the-art strategies in the biomimetic reconstruction of human enamel.

Study on the influence of leucine-rich amelogenin peptide (LRAP) on the remineralization of enamel defects via micro-focus x-ray computed tomography and nanoindentation

Regeneration of severely damaged enamel (e.g. deep demineralized lesions) is currently not possible, because the structural units of enamel crystal construction are removed after its maturation. The aim of this in vitro study was to evaluate the effect of surface impregnation by leucine-rich amelogenin peptide (LRAP) on the remineralization of eroded enamel using micro-focus x-ray computed tomography (µCT). Fifteen bovine enamel blocks were embedded in resin and three zones (sound, demineralization, and remineralization) were defined on each specimen. Lesions were prepared by immersing the samples in demineralization solution for 7 d. The samples were soaked in distilled water or 60 or 120 µg mL(-1) solution of LRAP in water for 30 min. After the surface treatment, specimens were incubated in artificial saliva for either 5 or 10 d at 37 °C. The amount of mineral gain (dΔZ%) and the relative changes in the lesion depth (dLD%), obtained from µCT, were used to evaluate the effect of LRAP on the remineralization of lesions. The effects of LRAP on cross-sectional integrated hardness ΔINH were studied after 10 d using nanoindentation. ANOVA test was used to determine the effect of time and/or LRAP concentration on dΔZ%, dLD% and ΔINH mean values. Tukey's analysis was used for multiple comparison testing (α = 0.05). Analysis of µCT data showed significant effect of time and LRAP concentration on the dΔZ% (p = 0.013, p = 0.003) and the dLD% (p  <  0.001, p = 0.002) mean values. The nanoindentation hardness was significantly improved by 120 µg mL(-1) LRAP (p = 0.02). Also, the peptide treatment affected the mineral distribution throughout the lesion by inhibiting of superficial deposition. This study showed that the treatment of eroded lesions in enamel by LRAP can improve and regulate the pattern of remineralization in vitro.

Methods for Biomimetic Mineralisation of Human Enamel: A Systematic Review

Biomimetic mineralisation is an alternative restorative methodology that imitates the natural process of mineralisation. We aimed to systematically review the laboratory methods on the biomimetic mineralisation of demineralised enamel. A search in the PubMed, ScienceDirect, and ISI Web of Science databases was performed. Clinical trials, reviews, non-English articles, animal teeth, non-tooth substrates, and irrelevant studies were excluded. After screening the titles and abstracts of initially searched articles, 20 papers remained for full-text analysis. Eight articles were identified from the references of the remaining papers. A total of 28 studies were included in this systematic review. We found that protein or protein analogues were used to mimic the function of natural protein in 23 studies. Bioactive components inspired by mussel, an agarose hydrogel model, a glycerine-enriched gelatine technique, and ethylenediaminetetraacetic acid, were also used for biomimetic mineralisation of enamel. These laboratory studies reported success in the biomimetic mineralisation of enamel. Potential further research on the biomimetic mineralisation of enamel was discussed.

Amelogenin and enamel biomimetics

Mature tooth enamel is acellular and does not regenerate itself.

8DSS-promoted remineralization of demineralized dentin in vitro

The 8DSS peptide successfully induced nano-crystals precipitation on the collagen matrix. The completely demineralized dentin was effectively remineralized and its mechanical properties were significantly improved.

8DSS-promoted remineralization of initial enamel caries in vitro

Peptides containing 8 repeats of aspartate-serine-serine (8DSS) have been shown to promote the nucleation of calcium phosphate from solution into human enamel. Here we tested the ability of 8DSS to promote the remineralization of demineralized enamel in an in vitro model of artificial early enamel caries. Initial caries lesions were created in bovine enamel blocks, which were then subjected to 12 d of pH cycling in the presence of 25 µM 8DSS, 1 g/L NaF (positive control) or buffer alone (negative control). Absorption of 8DSS was verified by X-ray photoelectron spectroscopy. Mineral loss, lesion depth, and mineral content at the surface layer and at different depths of the lesion body were analyzed before and after pH cycling by polarized light microscopy and transverse microradiography. Mineral loss after pH cycling was significantly lower in the 8DSS samples than in the buffer-only samples, and lesions in the 8DSS samples were significantly less deep. Samples treated with 8DSS showed significantly higher mineral content than buffer-only samples in the region extending from the surface layer (30 µm) to the average lesion depth (110 µm). No significant differences were found between the samples treated with 8DSS and those treated with NaF. These findings suggest that 8DSS has the potential to promote remineralization of demineralized enamel.

Bioinspired amphiphilic phosphate block copolymers as non-fluoride materials to prevent dental erosion

Inspired by the fact that certain natural proteins, e.g. casein phosphopeptide or amelogenin, are able to prevent tooth erosion (mineral loss) and to enhance tooth remineralization, a synthetic amphiphilic diblock copolymer, containing a hydrophilic methacryloyloxyethyl phosphate block (MOEP) and a hydrophobic methyl methacrylate block (MMA), was designed as a novel non-fluoride agent to prevent tooth erosion under acidic conditions. The structure of the polymer, synthesized by reversible addition-fragment transfer (RAFT) polymerization, was confirmed by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and nuclear magnetic resonance spectroscopy (NMR). While the hydrophilic PMOEP block within the amphiphilic block copolymer strongly binds to the enamel surface, the PMMA block forms a hydrophobic shell to prevent acid attack on tooth enamel, thus preventing/reducing acid erosion. The polymer treatment not only effectively decreased the mineral loss of hydroxyapatite (HAP) by 36-46% compared to the untreated control, but also protected the surface morphology of the enamel specimen following exposure to acid. Additionally, experimental results confirmed that low pH values and high polymer concentrations facilitate polymer binding. Thus, the preliminary data suggests that this new amphiphilic diblock copolymer has the potential to be used as a non-fluoride ingredient for mouth-rinse or toothpaste to prevent/reduce tooth erosion.

Microstructure and nanomechanical properties of enamel remineralized with asparagine-serine-serine peptide

A highly biocompatible peptide, triplet repeats of asparagine-serine-serine (3 NSS) was designed to regulate mineral deposition from aqueous ions in saliva for the reconstruction of enamel lesions. Healthy human enamel was sectioned and acid demineralized to create lesions, then exposed to the 3 NSS peptide solution, and finally immersed in artificial saliva for 24h. The surface morphology and roughness were examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. X-ray diffraction (XRD) was used to identify the phases and crystallinity of the deposited minerals observed on the enamel surface. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) was used to quantitatively analyze the mineral variation by calculating the relative integrated-area of characteristic bands. Nanohardness and elastic modulus measured by nanoindentation at various treatment stages were utilized to evaluate the degree of recovery. Biomimetic effects were accessed according to the degree of nanohardness recovery and the amount of hydroxyapatite deposition. The charged segments in the 3 NSS peptide greatly attracted aqueous ions from artificial saliva to form hydroxyapatite crystals to fill enamel caries, in particular the interrod areas, resulting in a slight reduction in overall surface roughness. Additionally, the deposited hydroxyapatites were of a small crystalline size in the presence of the 3 NSS peptide, which effectively restrained the plastic deformations and thus resulted in greater improvements in nanohardness and elastic modulus. The degree of nanohardness recovery was 5 times greater for remineralized enamel samples treated with the 3 NSS peptide compared to samples without peptide treatment.