Implant Surface Design Regulates Mesenchymal Stem Cell Differentiation and Maturation

Characterization of aTiO2 surfaces functionalized with CAP-p15 peptide

Functionalization of Titanium implants using adequate organic molecules is a proposed method to accelerate the osteointegration process, which relates to topographical, chemical, mechanical, and physical features. This study aimed to assess the potential of a peptide derived from cementum attachment protein (CAP-p15) adsorbed onto aTiO2 surfaces to promote the deposition of calcium phosphate (CaP) minerals and its impact on the adhesion and viability of human periodontal ligament cells (hPDLCs). aTiO2 surfaces were synthesized by magnetron sputtering technique. The CAP-p15 peptide was physically attached to aTiO2 surfaces and characterized by atomic force microscopy, fluorescence microscopy, and water contact angle measurement. We performed in vitro calcium phosphate nucleation assays using an artificial saliva solution (pH 7.4) to simulate the oral environment. morphological and chemical characterization of the deposits were evaluated by scanning electronic microscopy (SEM) and spectroscopy molecular techniques (Raman Spectroscopy, ATR-FTIR). The aTiO2 surfaces biofunctionalized with CAP-p15 were also analyzed for hPDLCs attachment, proliferation, and in vitro scratch-healing assay. The results let us see that the homogeneous amorphous titanium oxide coating was 70 nanometers thick. The CAP-p15 (1 μg/mL) displayed the ability to adsorb onto the aTiO2 surface, increasing the roughness and maintaining the hydrophilicity of the aTiO2 surfaces. The physical adsorption of CAP-p15 onto the aTiO2 surfaces promoted the precipitation of a uniform layer of crystals with a flake-like morphology and a Ca/P ratio of 1.79. According to spectroscopy molecular analysis, these crystalline deposits correspond to carbonated hydroxyapatite. Regarding cell behavior, the biofunctionalized aTiO2 surfaces improved the adhesion of hPDLCs after 24 h of cell culture, achieving 3.4-fold when compared to pristine surfaces. Moreover, there was an increase in cell proliferation and cell migration processes. Physical adsorption of CAP-p15 onto aTiO2 surfaces enhanced the formation of carbonate hydroxyapatite crystals and promoted the proliferation and migration of human periodontal ligament-derived cells in in vitro studies. This experimental model using the novel bioactive peptide CAP-p15 could be used as an alternative to increasing the osseointegration process of implants.

Effects and underlying mechanism of micro-nano-structured zirconia surfaces on biological behaviors of human gingival fibroblasts under inflammatory conditions

Zirconia is one of the most commonly used materials for abutments of dental implants, especially in the anterior region. Soft tissue integration to the zirconia abutment surface remains a challenge. Peri-implant soft tissue integration serves as a physiological barrier, attenuating pathogen penetration and preventing peri‑implant disease. The surface microstructure of zirconia has significant effects on the biological behaviors of human gingival fibroblasts (HGFs), but the effects under inflammatory conditions are still unclear. In this study, we established two micro-nano structures on zirconia surfaces using a femtosecond laser, including microgrooves with widths of 30 µm (G3) and 60 µm (G6) and depths of 5 µm, and nanoparticles inside the microgrooves. Polished surfaces were used as controls. HGFs were seeded onto the three groups of zirconia specimens and stimulated with lipopolysaccharide. The HGFs on micro-nano-structured zirconia surfaces exhibited lower inflammatory responses and higher cell adhesion, proliferation, and migration under inflammatory conditions compared with the polished surfaces. Additionally, the G3 group exhibited lower inflammatory responses and higher cell adhesion and migration than the G6 group. The micro-nano-structured zirconia surface exhibited decreased neutrophil infiltration and increased M2-type macrophage polarization in vivo. To explore the molecular mechanism, RNA sequencing and gene silencing were utilized, which revealed two critical target genes regulated by the G3 group. Overall, we proposed an innovative micro-nano-structured zirconia surface that reduced the in vitro and in vivo inflammatory responses and promoted HGF adhesion, migration, and proliferation under inflammatory conditions, in which TRAFD1 and NLRC5 were the underlying key genes. STATEMENT OF SIGNIFICANCE: Zirconia is one of the most commonly used materials for abutments, especially in the anterior region. The surface microstructure of zirconia has significant effects on the biological behaviors of human gingival fibroblasts (HGFs), but few studies have investigated these effects under inflammatory conditions, and the mechanism remains unclear. In this study, we developed an innovative micro-nano-structured zirconia surface using a femtosecond laser, which reduces the in vitro and in vivo pro-inflammatory responses and promotes HGFs adhesion, migration, and proliferation under inflammatory conditions compared with the polished zirconia surface. The potential underlying mechanism was also investigated. This work has provided some theoretical basis for the micro-nano-structured zirconia surface in potentially reducing the inflammation and enhancing peri‑implant soft-tissue integration under inflammatory conditions.

Navigating the Immunological Crossroads: Mesenchymal Stem/Stromal Cells as Architects of Inflammatory Harmony in Tissue-Engineered Constructs

In the dynamic landscape of tissue engineering, the integration of tissue-engineered constructs (TECs) faces a dual challenge-initiating beneficial inflammation for regeneration while avoiding the perils of prolonged immune activation. As TECs encounter the immediate reaction of the immune system upon implantation, the unique immunomodulatory properties of mesenchymal stem/stromal cells (MSCs) emerge as key navigators. Harnessing the paracrine effects of MSCs, researchers aim to craft a localized microenvironment that not only enhances TEC integration but also holds therapeutic promise for inflammatory-driven pathologies. This review unravels the latest advancements, applications, obstacles, and future prospects surrounding the strategic alliance between MSCs and TECs, shedding light on the immunological symphony that guides the course of regenerative medicine.

CD4+ and CD8+ T cells reduce inflammation and promote bone healing in response to titanium implants

T cells are adaptive immune cells essential in pathogenic response, cancer, and autoimmune disorders. During the integration of biomaterials with host tissue, T cells modify the local inflammatory environment by releasing cytokines that promote inflammatory resolution following implantation. T cells are vital for the modulation of innate immune cells, recruitment and proliferation of mesenchymal stem cells (MSCs), and formation of functional tissue around the biomaterial implant. We have demonstrated that deficiency of αβ T cells promotes macrophage polarization towards a pro-inflammatory phenotype and attenuates MSC recruitment and proliferation in vitro and in vivo. The goal of this study was to understand how CD4+ and CD8+ T cells, subsets of the αβ T cell family, impact the inflammatory response to titanium (Ti) biomaterials. Deficiency of either CD4+ or CD8+ T cells increased the proportion of pro-inflammatory macrophages, lowered anti-inflammatory macrophages, and diminished MSC recruitment in vitro and in vivo. In addition, new bone formation at the implantation site was significantly reduced in T cell-deficient mice compared to T cell-competent mice. Deficiency of CD4+ T cells exacerbated these effects compared to CD8+ T cell deficiency. Our results show the importance of CD4+ and CD8+ T cells in modulating the inflammatory response and promoting new bone formation in response to modified Ti implants. STATEMENT OF SIGNIFICANCE: CD4+ and CD8+ T cells are essential in modulating the peri-implant microenvironment during the inflammatory response to biomaterial implantation. This study shows that deficiency of either CD4+ or CD8+ T cell subsets altered macrophage polarization and reduced MSC recruitment and proliferation at the implantation site.

Modeling of a New Percutaneous Orthopedic Implant System to Control the Post-surgery Osseointegration Process

This study presents a mechanical model of a novel medical device designed to optimize the osseointegration process in upper and lower limb amputees, leading to the promotion of optimal rehabilitation. The medical device is developed to reduce the risk of implant failure, leading to re-amputation above the implant. The proposed model serves several purposes: 1) to guide the osseointegration process by providing electrical endo-stimulation directly to the bone-implant contact site, using an invasive electrical stimulation system, which is implanted in the bone permanently, 2) to locally transmit stem cells after implantation, without the need for opening the skin or perforating the bone, which is particularly useful for regenerative medicine after partial healing of the implant, 3) to transmit necessary nutrients from the bone, also without opening the skin or puncturing the bone, and 4) to combat infections by locally administering drugs after implantation.

Nanoscaled Titanium Oxide Layer Provokes Quick Osseointegration on 3D-Printed Dental Implants: A Domino Effect Induced by Hydrophilic Surface

Three-dimensional printing is a revolutionary strategy to fabricate dental implants. Especially, 3D-printed dental implants modified with nanoscaled titanium oxide layer (H-SLM) have impressively shown quick osseointegration, but the accurate mechanism remains elusive. Herein, we unmask a domino effect that the hydrophilic surface of the H-SLM facilitates blood wetting, enhances the blood shear rate, promotes blood clotting, and changes clot features for quick osseointegration. Combining computational fluid dynamic simulation and biological verification, we find a blood shear rate during blood wetting of the hydrophilic H-SLM 1.2-fold higher than that of the raw 3D-printed implant, which activates blood clot formation. Blood clots formed on the hydrophilic H-SLM demonstrate anti-inflammatory and pro-osteogenesis effects, leading to a 1.5-fold higher bone-to-implant contact and a 1.8-fold higher mechanical anchorage at the early stage of osseointegration. This mechanism deepens current knowledge between osseointegration speed and implant surface characteristics, which is instructive in surface nanoscaled modification of multiple 3D-printed intrabony implants.

Development of hydrogel-based composite scaffolds containing eggshell particles for bone regeneration applications

This study describes the development and characterization of novel composite scaffolds, made of an alginate-chitosan hydrogel matrix containing eggshell (ES) particles, for bone tissue engineering applications. Scaffolds with ES particles, either untreated or treated with phosphoric acid to create a nanotextured particle surface, were compared to scaffolds without particles. Results indicate that the nanotexturing process exposed occluded ES proteins orthologous to those in human bone extracellular matrix. Scaffolds with ES or nanotextured ES (NTES) particles had a higher porosity (81 ± 4% and 89 ± 5%, respectively) than scaffolds without particles (59 ± 5%) (p = .002 and p < .001, respectively). Scaffolds with NTES particles had a larger median pore size (113 μm [interquartile range [IQ]: 88-140 μm]) than scaffolds with ES particles (94 μm [IQ: 75-112 μm]) and scaffolds without particles (99 μm [IQ: 74-135 μm]) (p < .001 and p = .011, respectively). The compressive modulus of the scaffolds with ES or NTES particles remained low (3.69 ± 0.70 and 3.14 ± 0.62 kPa, respectively), but these scaffolds were more resistant to deformation following maximum compression than those without particles. Finally, scaffolds with ES or NTES particles allowed better retention of human mesenchymal stem cells during seeding (53 ± 12% and 57 ± 8%, respectively, vs. 17 ± 5% for scaffolds without particles; p < .001 in both cases), as well as higher cell viability up to 21 days of culture (67 ± 17% and 61 ± 11%, respectively, vs. 15 ± 7% for scaffolds without particles; p < .001 in both cases). In addition, alkaline phosphatase (ALP) activity increased up to 558 ± 164% on day 21 in the scaffolds with ES particles, and up to 567 ± 217% on day 14 in the scaffolds with NTES particles (p = .006 and p = .002, respectively, relative to day 0). Overall, this study shows that the physicochemical properties of the alginate-chitosan hydrogel scaffolds with ES or NTES particles are similar to those of cancellous bone. In addition, scaffolds with particles supported early osteogenic differentiation and therefore represent a promising new bone substitute, especially for non-load bearing applications.

Alkali-treated titanium dioxide promotes formation of proteoglycan layer and altered calcification and immunotolerance capacity in bone marrow stem cell

Introduction

In this study, we report that a proteoglycans (PGs)-layer between the bone and titanium dioxide (TiO2) surface after osseointegration improved the calcification capacity and immunotolerance of human bone marrow mesenchymal stem cells (hBMSCs) on TiO2. Alkaline treatment of TiO2 is a method for promoting osteogenesis in hBMSCs. We hypothesized that promotion of osteogenesis due to alkaline treatment was caused by changing PGs-layer on TiO2.

Objective

This study aimed to analyze whether alkaline treatment of TiO2 affects PGs-layer formation and immunotolerance in hBMSCs.

Methods

The topology and wettability of the alkaline-treated titanium (Ti-Al) and unprocessed titanium (Ti-MS) surfaces were characterized. Initial cell attachment, cell proliferation, calcification capacity, alkaline phosphatase activity, PGs-layer formation, PGs function, and the expression of osteogenic and immunotolerance-related genes were analyzed. The conditioned medium (CM) from hBMSCs grown on Ti-Al and Ti-MS was added to macrophages (hMps) and Jurkat cells, and immunotolerance gene expression in these cells was analyzed.

Results

hBMSCs cultured on Ti-Al showed increased initial cell attachment, cell proliferation, PG-layer formation, and osteogenic capacity compared with hBMSCs on Ti-MS. Gene expression of indoleamine 2,3-dioxygenase (IDO) in the hBMSCs cultured on Ti-Al was higher than that in the hBMSCs on Ti-MS. CM from hBMSCs did not affect markers of M1 and M2 macrophages in hMps. CM from hBMSCs cultured on Ti-Al altered the gene expression of Foxp3 in Jurkat cells compared to that of CM from hBMSCs on Ti-MS.

Significance

These results suggest that alkaline treatment of TiO2 altered PGs-layer formation, and changed the osteogenesis and immunotolerance of hBMSCs.

Surface modification of titanium implants with Mg-containing coatings to promote osseointegration

Titanium (Ti) and Ti alloys are commonly used in dental implants, which have good biocompatibility, mechanical strength, processability, and corrosion resistance. However, the surface inertia of Ti implants leads to delayed integration of Ti and new bone, as well as problems such as aseptic loosening and inadequate osseointegration. Magnesium (Mg) ions can promote bone regeneration, and many studies have used Mg-containing materials to modify the Ti implant surface. This systematic review summarizes the methods, effects, and clinical applications of surface modification of Ti implants with Mg-containing coatings. Database collection was completed on Janury 1, 2023, and a total of 29 relevant studies were ultimately included. Mg can be compounded with different materials and coated to the surface of Ti implants using different methods. In vitro and in vivo experiments have shown that Mg-containing coatings promote cell adhesion and osteogenic differentiation. On the one hand, the surface roughness of implants increases with the addition of Mg-containing coatings, which is thought to have an impact on the osseointegration of the implant. On the other hand, Mg ions promote cell attachment through binding interactions between the integrin family and FAK-related signaling pathways. And Mg ions could induce osseointegration by activating PI3K, Notch, ERK/c-Fos, BMP-4-related signaling pathways and TRPM7 protein channels. Overall, Mg-based coatings show great potential for the surface modification of Ti implants to promote osseointegration. STATEMENT OF SIGNIFICANCE: The inertia surface of titanium (Ti) implants leads to delayed osseointegration. Magnesium (Mg) ions, known for promoting bone regeneration, have been extensively studied to modify the surface of Ti implants. However, no consensus has been reached on the appropriate processing methods, surface roughness and effective concentration of Mg-containing coatings for osseointegration. This systematic review focus on the surface modification of Ti implants with Mg-containing compounds, highlighting the effects of Mg-containing coatings on the surface properties of Ti implants and its associated mechanisms. Besides, we also provide an outlook on future directions to promote the clinical application of Mg-modified implants.

Effects of Nitrurized Titanium on Microhardness and Human Dental Pulp Stem Cell Adhesion and Differentiation

To compare the Vickers microhardness, surface roughness, initial adhesion, and osteogenic differentiation on titanium (Ti) and nitrurized titanium (NTi) plates were treated by UV irradiation and chitosan. Each plate was subjected to Vickers hardness with a pressure of 2.9 N for 10 seconds and roughness evaluation by atomic force microscope (AFM) analysis. Three groups of each type of plates were tested: control (C), ultraviolet irradiation (UV), and chitosan (Q). The UV group was exposed to UV-irradiation for 20 min at 253.7 nm (52 μW/cm2). The Q group was coated with 1% chitosan, and the C group had no treatment. The osteoblasts (2 × 106 cells/mL) were inoculated in each group for 60 min and their viability was determined by the MTT bioassay. Osteogenic differentiation was performed over 4 weeks and determined by alizarin red staining. The mean was analyzed with the Shapiro-Wilks, Kruskall-Wallis, and Mann-Whitney U tests of normality (n = 9/gp). The NTi plates hardness (125.1 ± 4.01 HV) was higher (P = 0.026) than the Ti plates (121.3 ± 2.23 HV). The surface topography was: NTi (Ra = 0.098 μm) and Ti (Ra = 0.212 μm). The quantification of cell adhesion was: Ti + Q = 123 ± 4.9% (P < 0.05) < NTi + Q = 107 ± 3.3% < Ti = 100 ± 10.7% < NTi = 72 ± 6.8% < NTi + UV = 71 ± 4.4% < Ti + UV = 69 ± 3.5%, regardless the plates, the presence of chitosan induce a faster osteogenic differentiation. The Ti + Q plates tested the highest cell attachment and osteogenic adhesion suggesting their potential use of chitosan for cell-implant interaction.

Semaphorin 3A delivered by a rapidly polymerizing click hydrogel overcomes impaired implant osseointegration in a rat type 2 diabetes model

Semaphorin 3A (sema3A) is an osteoprotective factor that enhances bone formation while inhibiting osteoclast bone resorption. It is produced by rat calvarial osteoblasts cultured on grit-blasted/acid-etched microtextured (SLA) titanium surfaces at higher levels than on tissue culture polystyrene, suggesting that it may improve performance of titanium implants in vivo, particularly in conditions characterized by compromised bone quality. To test this, we established a clinically relevant type 2 diabetes mellitus (T2DM) rat model and used a non-toxic click hydrogel that rapidly polymerizes in situ (GEL) to provide localized controlled delivery of sema3A. In vitro studies confirmed that sema3A released from GEL was biologically active, increasing osteoblast differentiation of a pre-osteoblast cell-line. Whereas increased sema3A production was not observed in T2DM calvarial osteoblasts cultured on SLA, exogenous sema3A enhanced surface-induced osteoblast differentiation, indicating that it would be a viable candidate for in vivo use. Delivery of sema3A either by GEL or by local injection to bone defects enhanced osseointegration of SLA implants in the T2DM rats. Trabecular bone mass and bone-to-implant contact were decreased in T2DM rats compared to normal rats; sema3A delivered locally improved both parameters. These findings suggest that reduced trabecular bone contributes to poor osseointegration in T2DM patients and support GEL as a promising treatment option for sustained release of therapeutic doses of sema3A. Moreover, using this clinically translatable T2DM model and developing a biocompatible, Cu-free click chemistry hydrogel platform for the non-invasive delivery of therapeutics has major implications for regenerative medicine as a whole. STATEMENT OF SIGNIFICANCE: Osseointegration is compromised in patients with poor bone quality due to conditions like type 2 diabetes mellitus (T2DM). Previously, we showed that semaphorin 3A (sema3A) production is increased when human bone marrow stromal cells are cultured on titanium substrates that support osseointegration in vivo, suggesting it may enhance peri-implant osteogenesis in diabetes. Here we established a spontaneously developing T2DM rat model with clinical translatability and used it to assess sema3A effectiveness. Sema3A was delivered to the implant site via a novel copper-free click hydrogel, which has minimal swelling behavior and superior rheological properties. Osseointegration was successfully restored, and enhanced compared to burst release through injections. This study provides scientific evidence for using sema3A to treat impaired osseointegration in T2DM patients.

Topography-mediated immunomodulation in osseointegration; Ally or Enemy

Osteoimmunology is at full display during endosseous implant osseointegration. Bone formation, maintenance and resorption at the implant surface is a result of bidirectional and dynamic reciprocal communication between the bone and immune cells that extends beyond the well-defined osteoblast-osteoclast signaling. Implant surface topography informs adherent progenitor and immune cell function and their cross-talk to modulate the process of bone accrual. Integrating titanium surface engineering with the principles of immunology is utilized to harness the power of immune system to improve osseointegration in healthy and diseased microenvironments. This review summarizes current information regarding immune cell-titanium implant surface interactions and places these events in the context of surface-mediated immunomodulation and bone regeneration. A mechanistic approach is directed in demonstrating the central role of osteoimmunology in the process of osseointegration and exploring how regulation of immune cell function at the implant-bone interface may be used in future control of clinical therapies. The process of peri-implant bone loss is also informed by immunomodulation at the implant surface. How surface topography is exploited to prevent osteoclastogenesis is considered herein with respect to peri-implant inflammation, osteoclastic precursor-surface interactions, and the upstream/downstream effects of surface topography on immune and progenitor cell function.

Canonical Wnt signaling enhances pro-inflammatory response to titanium by macrophages

Biomaterial characteristics like surface roughness and wettability can determine the phenotype of macrophages following implantation. We have demonstrated that inhibiting Wnt ligand secretion abolishes macrophage polarization in vitro and in vivo; however, the role of canonical Wnt signaling in macrophage activation in response to physical and chemical biomaterial cues is unknown. The aim of this study was to understand whether canonical Wnt signaling affects the response of macrophages to titanium (Ti) surface roughness or wettability in vitro and in vivo. Activating canonical Wnt signaling increased expression of toll-like receptors and interleukin receptors and secreted pro-inflammatory cytokines and reduced anti-inflammatory cytokines on Ti, regardless of surface properties. Inhibiting canonical Wnt signaling reduced pro-inflammatory cytokines on all Ti surfaces and increased anti-inflammatory cytokines on rough or rough-hydrophilic Ti. In vivo, activating canonical Wnt signaling increased total macrophages, pro-inflammatory macrophages, and T cells and decreased anti-inflammatory macrophages on both smooth and rough-hydrophilic implants. Functionally, canonical Wnt activation increases pro-inflammatory macrophage response to cell and cell-extracellular matrix lysates. These results demonstrate that activating canonical Wnt signaling primes macrophages to a pro-inflammatory phenotype that affects their response to Ti implants in vitro and in vivo.

Nanoscale hybrid implant surfaces and Osterix-mediated osseointegration

Endosseous implant surface topography directly affects adherent cell responses following implantation. The aim of this study was to examine the impact of nanoscale topographic modification of titanium implants on Osterix gene expression since this gene has been reported as key factor for bone formation. Titanium implants with smooth and nanoscale topographies were implanted in the femurs of Osterix-Cherry mice for 1-21 days. Implant integration was evaluated using scanning electron microscopy (SEM) to evaluate cell adhesion on implant surfaces, histology, and nanotomography (NanoCT) to observe and quantify the formed bone-to-implant interface, flow cytometry to quantify of Osterix expressing cells in adjacent tissues, and real-time PCR (qPCR) to quantify the osteoinductive and osteogenic gene expression of the implant-adherent cells. SEM revealed topography-dependent adhesion of cells at early timepoints. NanoCT demonstrated greater bone formation at nanoscale implants and interfacial osteogenesis was confirmed histologically at 7 and 14 days for both smooth and nanosurface implants. Flow cytometry revealed greater numbers of Osterix positive cells in femurs implanted with nanoscale versus smooth implants. Compared to smooth surface implants, nanoscale surface adherent cells expressed higher levels of Osterix (Osx), Alkaline phosphatase (Alp), Paired related homeobox (Prx1), Dentin matrix protein 1 (Dmp1), Bone sialoprotein (Bsp), and Osteocalcin (Ocn). In conclusion, nanoscale surface implants demonstrated greater bone formation associated with higher levels of Osterix expression over the 21-day healing period with direct evidence of surface-associated gene regulation involving a nanoscale-mediated osteoinductive pathway that utilizes Osterix to direct adherent cell osteoinduction.

The Bumpy Road to Stem Cell Therapies: Rational Design of Surface Topographies to Dictate Stem Cell Mechanotransduction and Fate

Cells sense and respond to a variety of physical cues from their surrounding microenvironment, and these are interpreted through mechanotransductive processes to inform their behavior. These mechanisms have particular relevance to stem cells, where control of stem cell proliferation, potency, and differentiation is key to their successful application in regenerative medicine. It is increasingly recognized that surface micro- and nanotopographies influence stem cell behavior and may represent a powerful tool with which to direct the morphology and fate of stem cells. Current progress toward this goal has been driven by combined advances in fabrication technologies and cell biology. Here, the capacity to generate precisely defined micro- and nanoscale topographies has facilitated the studies that provide knowledge of the mechanotransducive processes that govern the cellular response as well as knowledge of the specific features that can drive cells toward a defined differentiation outcome. However, the path forward is not fully defined, and the "bumpy road" that lays ahead must be crossed before the full potential of these approaches can be fully exploited. This review focuses on the challenges and opportunities in applying micro- and nanotopographies to dictate stem cell fate for regenerative medicine. Here, key techniques used to produce topographic features are reviewed, such as photolithography, block copolymer lithography, electron beam lithography, nanoimprint lithography, soft lithography, scanning probe lithography, colloidal lithography, electrospinning, and surface roughening, alongside their advantages and disadvantages. The biological impacts of surface topographies are then discussed, including the current understanding of the mechanotransductive mechanisms by which these cues are interpreted by the cells, as well as the specific effects of surface topographies on cell differentiation and fate. Finally, considerations in translating these technologies and their future prospects are evaluated.

Differential Effects of Neurectomy and Botox-induced Muscle Paralysis on Bone Phenotype and Titanium Implant Osseointegration

Metabolic bone is highly innervated by both sensory and sympathetic nerves. In addition to skeletal development, neural regulation participates in local bone remodeling, which is important for successful osseointegration of titanium implants. Neurectomy is a model used to investigate the lack of neural function on bone homeostasis, but the relative impacts of direct denervation to bone or denervation-induced muscle paralysis are less well defined. To investigate this difference, we used two nerve intervention models, sciatic and femoral neurectomy (SFN) v. botox-induced muscle paralysis (BTX) and assessed the resulting femoral bone phenotype and Ti implant osseointegration. Male Sprague Dawley rats (19) were randomly divided into three groups: implant control (n = 5), SFN (n = 7), and BTX (n = 7). Ti implants (microrough/hydrophilic [modSLA], Institut Straumann AG) were placed in the distal metaphysis of each femur on day 24 post-SFN or BTX. Bone and muscle were examined on day 28 after implant insertion. Both nerve intervention models impaired osseointegration. MicroCT and histology indicated that both models had reduced trabecular bone formation. Only BTX reduced cortical bone formation and increased cortical bone porosity. BTX resulted in more bone loss characterized by the least trabecular and cortical bone, as well as osseointegration. Osteoblasts isolated from the tibia exhibited a model-specific phenotype when they were grown on Ti substrates in vitro. Neurectomy caused more severe muscle atrophy than botox injection. These results indicate that neural regulation directly modulates bone formation and osseointegration. Muscle paralysis modulated the effects of loss of neural inputs into bone, supporting the hypothesis that mechanical loading of bone is a factor in achieving successful osseointegration. The different effects of botox and neurectomy on bone phenotype indicated that the sensory and sympathetic nerves had a role in the osseointegration process.

Implant Placement With Graftless Sinus Floor Elevation via the Lateral Approach: A Case Series With 4 Years Post-Loading Radiographical Outcomes and Implant Survival Rate

ABSTRACT

The purpose of the present study was to evaluate the radiographical outcomes, survival rate, and amount of bone formation around implants placed during graftless lateral sinus lift approach (GLSLA). Five patients (6 sinus augmentations) were consecutively treated with GLSLA. After Schneiderian membrane elevation and implant insertion, only blood clot was left to fill the new sinus compartment. After 4 months of healing, implants were functionally loaded. In all cases, samples were taken for biopsy at the time of second-stage surgery. The radiographical marginal bone variations and apical bone gain were assessed using cone beam-computed tomography taken 4 months after the surgery (at crown insertion) and after 4 years of loading. A total of 14 implants were placed in a mean initial residual bone height of 3.1 mm (range 1.6-4 mm). No failure was recorded, and all the implants were successfully loaded yielding a 100% survival rate. Vital bone formation was 33% according to the histomorphometry data. Four years after loading the mean radiographic bone remodeling was 1.3 mm. The mean ridge height was 7.6 mm and the mean apical bone gain amounted for 3.8 mm. Within the limitations of this study, the placement of dental implants in conjunction with GLSLA seems to be feasible and accompanied by high implant survival rate.

Histological and Histomorphometric Comparison of Innovative Dental Implants Laser Obtained: Animal Pilot Study

OBJECTIVE

Evaluation of the in vivo bone response of two innovative titanium surfaces ytterbium laser active fiber obtained (L1-L2) compared to a sandblasted and acid etched (SBAE) during early phase of osseointegration.

MATERIAL AND METHODS

Three implant groups with the same macroscopic features were obtained (L1-L2-SBAE) to promote specific surface characteristics. Scanning electron microscopy, profilometric evaluation, X-ray spectrometry, and diffraction analysis were performed. For each group, six implants were placed in the tibiae of three Peli Buey sheep, and histologic, histomorphometric analysis, bone to implant contact (BIC), and the Dynamic Osseointegration index (DOI) were performed.

RESULTS

During the early phases of osseointegration, the histological and histomorphometric results showed significant differences between L1-L2-SBAE implants. At 15 and 30 days, histological analysis detected a newly bone formation around all specimens with an higher vital bone in L2 compared to L1 and SBAE both in cortical and in poor-quality marrow bone. At same time, histomorphometric analysis showed significantly higher BIC values in L2 (42.1 ± 2.6 and 82.4 ± 2.2) compared to L1 (5.2 ± 3.1 and 56.2 ± 1.3) and SBAE (23.3 ± 3.9 and 77.3 ± 0.4). DOI medium value showed a higher rate in L2 (2.83) compared to SBAE (2.60) and L1 (1.91).

CONCLUSIONS

With the limitations of this pilot study, it is possible to assess that the titanium surface characteristics, and not the technologies used to obtain the modification, played a crucial role during the osseointegration process. Histological, histomorphometric, BIC, and DOI evaluation showed a significantly higher rate in L2 specimens compared to others, confirming that the implant surface could increase the bone response in cortical or marrow poor quality bone during the initial phases of osseointegration.

Surface characteristics on commercial dental implants differentially activate macrophages in vitro and in vivo

OBJECTIVES

Biomaterial implantation provokes an inflammatory response that controls integrative fate. M2 macrophages regulate the response to implants by resolving the inflammatory phase and recruiting progenitor cells to aid healing. We have previously shown that modified titanium (Ti) disks directly induce M2 macrophage polarization. The aim of this study was to examine macrophage response to commercially available Ti or Ti alloy implants with comparable roughness and varying hydrophilicity.

MATERIAL AND METHODS

Eleven commercially available Ti (A-F) or Ti alloy (G-K) dental implants were examined in this study. Surface topography, chemistry, and hydrophilicity were characterized for each implant. To compare the immune response in vitro, human monocyte-derived macrophages were seeded on implants and secreted pro- and anti-inflammatory proteins measured. To evaluate the inflammatory response in vivo, mice were subcutaneously instrumented with clinical implants, and implant adherent macrophage populations were characterized by flow cytometry.

RESULTS

Macrophages on hydrophobic Implant C produced the highest level of pro-inflammatory proteins in vitro. In contrast, hydrophilic Implant E produced the second-highest pro-inflammatory response. Implants F and K, both hydrophilics, produced the highest anti-inflammatory protein secretions. Likewise, pro-inflammatory CD80hi macrophages predominated in vivo on implants C and E, and M2 CD206 + macrophages predominated on implants F and K.

CONCLUSIONS

These findings show that hydrophilicity alone is insufficient to predict the anti-inflammatory effect on macrophage polarization and that other properties-surface composition or topography-determine immune modulation. This in vivo model may be a useful screening method to compare the immunomodulatory response to clinical implants of disparate geometry or size.

Surface Modification Techniques to Enhance Osseointegration of Spinal Implants

Biomechanical function, specifically implantation technique and immediate surgical fixation, of orthopaedic implants is the primary consideration during the development of orthopaedic implants. Biologic and material characteristics are additional factors to include in the design process because of the direct impact on short- and long-term implant performance. The body's initial interaction with implant materials can affect protein- and cell-based function, thereby either promoting or impeding osseointegration. An understanding and inclusion of the biologic response, material surface morphology, and material surface chemistry in implant design is crucial because these factors ultimately determine implant function and patient outcomes. Highlighting the biologic- and material-related advantages and inadequacies of current and potential implant materials as well as applications may guide further research and development of implant materials and designs.

Tissue Integration and Biological Cellular Response of SLM-Manufactured Titanium Scaffolds

Background: SLM (Selective Laser Melting)–manufactured Titanium (Ti) scaffolds have a significant value for bone reconstructions in the oral and maxillofacial surgery field. While their mechanical properties and biocompatibility have been analysed, there is still no adequate information regarding tissue integration. Therefore, the aim of this study is a comprehensive systematic assessment of the essential parameters (porosity, pore dimension, surface treatment, shape) required to provide the long-term performance of Ti SLM medical implants. Materials and methods: A systematic literature search was conducted via electronic databases PubMed, Medline and Cochrane, using a selection of relevant search MeSH terms. The literature review was conducted using the preferred reporting items for systematic reviews and meta-analysis (PRISMA). Results: Within the total of 11 in vitro design studies, 9 in vivo studies, and 4 that had both in vitro and in vivo designs, the results indicated that SLM-generated Ti scaffolds presented no cytotoxicity, their tissue integration being assured by pore dimensions of 400 to 600 µm, high porosity (75–88%), hydroxyapatite or SiO2–TiO2 coating, and bioactive treatment. The shape of the scaffold did not seem to have significant importance. Conclusions: The SLM technique used to fabricate the implants offers exceptional control over the structure of the base. It is anticipated that with this technique, and a better understanding of the physical interaction between the scaffold and bone tissue, porous bases can be tailored to optimize the graft’s integrative and mechanical properties in order to obtain structures able to sustain osseous tissue on Ti.

The effect of macrophages on an atmospheric pressure plasma-treated titanium membrane with bone marrow stem cells in a model of guided bone regeneration

Guided bone regeneration (GBR) is an established treatment. However, the mechanisms of GBR are not fully understood. Recently, a GBR membrane was identified that acts as a passive barrier to regenerate bone via activation and migration of macrophages (Mps) and bone marrow stem cells (BMSCs). Atmospheric pressure plasma treatment of the titanium membrane (APP-Ti) activated macrophages. The purpose of this study was to analyze whether macrophages attached to an APP-Ti membrane affected differentiation of BMSCs in a GBR model. Human THP-1 macrophages (hMps) were cultured on non-treated Ti (N-Ti) and APP-Ti membrane. Macrophage polarization was analyzed by RT-PCR and immunocytochemistry. Secreted proteins from hMps on N-Ti and APP-Ti were detected by LC/MS/MS. hBMSCs were co-cultured with hMps on N-Ti or APP-Ti and analyzed by osteogenic differentiation, Alizarin red S staining, and alkaline phosphatase (ALP) activity. N-Ti and APP-Ti membrane were also implanted into bone defects of rat calvaria. hMps on APP-Ti were polarized M2-like macrophages. hMps on N-Ti secreted plasminogen activator inhibitor-1 and syndecan-2, but hMps on APP-Ti did not. hBMSCs co-cultured with hMps on APP-Ti increased cell migration and gene expression of osteogenic markers, but suppressed mineralization, while ALP activity was similar to that of hMps on N-Ti in vitro. The volume of newly formed bone was not significantly different between N-Ti and APP-Ti membrane in vivo. M2 polarized hMps on APP-Ti suppressed osteogenic induction of hBMSCs in vitro. The indirect role of hMps on APP-Ti in newly formed bone was limited.

Is there an association between the use of antidepressants and complications involving dental implants? A systematic review and meta-analysis

The aim of this systematic review was to evaluate published evidence on the association between the use of antidepressants and complications involving dental implants. Two reviewers independently performed electronic searches of the MEDLINE/PubMed, Cochrane Library, and Scopus databases for relevant articles published up to May 30, 2019. This review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. The Newcastle-Ottawa Scale was used for the appraisal of the methodological quality of the studies included. A meta-analysis was performed to determine the risk of dental implant failure in individuals taking antidepressants. Five comparative observational studies were selected for this review; these included a total of 2056 participants with 5302 implants. The results suggest a risk ratio of 3.73 (95% confidence interval 1.85-7.52, P=0.0002) for implant failure in antidepressant users submitted to oral rehabilitation when compared to non-users. However, these studies did not present methodological rigour or standardize the drugs used. Thus, there is insufficient evidence for an association between antidepressant use and dental implant complications.

Comparison of the osteoblastic activity of low elastic modulus Ti-24Nb-4Zr-8Sn alloy and pure titanium modified by physical and chemical methods

Ti-24Nb-4Zr-8Sn (Ti2448) alloy is a novel low elastic modulus β-titanium alloy without toxic elements. It also has the advantage of high strength, so it has potential application prospects for implantation. To develop its osteogenic effects, it can be modified by electrochemical, and physical processes. The main research aim of this study was to explore the bioactivity of Ti2448 alloy modified by sandblasted, large-grit, acid-etched (SLA), micro-arc oxidation (MAO) and anodic oxidation (AO), and to determine which of the three surface modifications is the best way for developing the osteogenesis of bone marrow mesenchymal stem cells (BMMSCs). In vitro studies, the cytoskeleton, focal adhesion and proliferation of BMMSCs showed that both pure titanium and Ti2448 alloy have good biocompatibility. The osteogenic differentiation of BMMSCs with the Ti2448 alloy were examined by detecting alkaline phosphatase (ALP), mineralization nodules and osteogenic proteins and were better than that with pure titanium. These results showed that the Ti2448 alloy treated by SLA has a better effect on osteogenesis than pure titanium, and AO is the best way of three surface treatments to improve osteogenesis in this study.

Effect of implant surface material and roughness to the susceptibility of primary gingival fibroblasts to inflammatory stimuli

OBJECTIVES

The impact of the implant surface material and roughness on inflammatory processes in peri-implantitis is not entirely clear. Hence, we investigated how titanium and zirconia surfaces with different roughness influence the susceptibility of primary human gingival fibroblasts to different inflammatory stimuli.

METHODS

Primary human gingival fibroblasts were isolated from 8 healthy individuals and cultured on following surfaces: smooth titanium machined surface (TiM), smooth zirconia machined surface (ZrM), moderately rough titanium surface (SLA), or moderately rough zirconia surface (ZLA). Subsequently, stimulation with one of the following stimuli was performed: Porphyromonas gingivalis lipopolysaccharide (LPS), tumor necrosis factor (TNF)-α, interleukin (IL)-1β. The resulting production of IL-6, IL-8, and monocyte chemoattractant protein (MCP)-1 was measured by qPCR and ELISA.

RESULTS

P. gingivalis LPS induced IL-6 and MCP-1 production was slightly higher on titanium surfaces compared to zirconia surfaces. IL-1β induced IL-6 production was not affected by any surface characteristic. The production of MCP-1 in response to IL-1β was higher on smooth compared to rough surfaces and was not affected by the material. The production of IL-6 and MCP-1 in response to TNF-α was most strongly affected by surface characteristics. Higher production of these cytokine was observed on smooth compared to rough surfaces and on titanium compared to zirconia surfaces. Surface characteristics had only minor effects on IL-8 production.

SIGNIFICANCE

The susceptibility of primary gingival fibroblasts to inflammation depends on various factors, such as surface material, surface roughness and the nature of inflammatory stimuli. All these factors might determine susceptibility to peri-implantitis.

Microarc oxidation surface of titanium implants promote osteogenic differentiation by activating ERK1/2-miR-1827-Osterix

There has been a constant requirement from the clinic to develop biomedical titanium (Ti) implants with high osteogenic ability. In this study, we clarified a novel mechanism of how MAO (microarc oxidation) coating of Ti implants facilitates osteogenic differentiation of human bone marrow mesenchymal stem cells (hB-MSCs) by activating ERK1/2-miR-1827-Osterix signaling pathway in vitro. MAO surface of titanium implant was more favorable to promote osteogenic differentiation than SLA and AOS coating. Besides, titanium implants regulated hB-MSCs osteogenesis through the p38 MAPK pathway and ERK1/2 might be the most efficient target. Furthermore, MAO coating induced osteogenic differentiation though ERK1/2-miR-1827 pathway. Finally, we verified miR-1827 regulated osteogenic differentiation partially through Osterix. Our study reveals novel insights that MAO surface of titanium implant is a prior choice for biomedical trial and for its use in periprosthetic osteolysis (PIO) treatment in an evidence-based rationale.

Dental Implants with Different Neck Design: A Prospective Clinical Comparative Study with 2-Year Follow-Up

The present study was conducted to investigate whether a different implant neck design could affect survival rate and peri-implant tissue health in a cohort of disease-free partially edentulous patients in the molar–premolar region. The investigation was conducted on 122 dental implants inserted in 97 patients divided into two groups: Group A (rough wide-neck implants) vs. Group B (rough reduced-neck implants). All patients were monitored through clinical and radiological checkups. Survival rate, probing depth, and marginal bone loss were assessed at 12- and 24-month follow-ups. Patients assigned to Group A received 59 implants, while patients assigned to Group B 63. Dental implants were placed by following a delayed loading protocol, and cemented metal–ceramic crowns were delivered to the patients. The survival rates for both Group A and B were acceptable and similar at the two-year follow-up (96.61% vs. 95.82%). Probing depth and marginal bone loss tended to increase over time (follow-up: t₁ = 12 vs. t₂ = 24 months) in both groups of patients. Probing depth (p = 0.015) and bone loss (p = 0.001) were significantly lower in Group A (3.01 vs. 3.23 mm and 0.92 vs. 1.06 mm; Group A vs. Group B). Within the limitations of the present study, patients with rough wide-neck implants showed less marginal bone loss and minor probing depth, as compared to rough reduced-neck implants placed in the molar–premolar region. These results might be further replicated through longer-term trials, as well as comparisons between more collar configurations (e.g., straight vs. reduced vs. wide collars).

Mesenchymal stem cell interaction with Ti6Al4V alloy pre-exposed to simulated body fluid

Titanium and its alloys are widely used for substitution of hard tissues, especially in orthopaedic and dental surgery. Despite the benefit of the use of titanium for such applications, there are still questions which must be sorted out. Surface properties are crucial for cell adhesion, proliferation and differentiation. Mainly, micro/nanostructured surfaces positively influence osteogenic differentiation of human mesenchymal stem cells. Ti₆Al₄V is a biocompatible α + β alloy which is widely used in orthopaedics. The aim of this study was to investigate the interaction of the nanostructured and ground Ti₆Al₄V titanium alloys with simulated body fluid complemented by the defined precipitation of hydroxyapatite-like coating and to study the cytotoxicity and differentiation capacity of cells with such a modified titanium alloy. Nanostructures were fabricated using electrochemical oxidation. Human mesenchymal stem cells (hMSC) were used to evaluate cell adhesion, metabolic activity and proliferation on the specimens. The differentiation potential of the samples was investigated using PCR and specific staining of osteogenic markers collagen type I and osteocalcin. Our results demonstrate that both pure Ti₆Al₄V, nanostructured samples, and hydroxyapatite-like coating supported hMSC growth and metabolic activity. Nanostructured samples improved collagen type I synthesis after 14 days, while both nanostructured and hydroxyapatite-like coated samples enhanced collagen synthesis on day 21. Osteocalcin synthesis was the most enhanced by hydroxyapatite-like coating on the nanostructured surfaces. Our results indicate that hydroxyapatite-like coating is a useful tool guiding hMSC osteogenic differentiation.

Titanium and its alloys are widely used for substitution of hard tissues, especially in orthopaedic and dental surgery.

Directed Irradiation Synthesis as an Advanced Plasma Technology for Surface Modification to Activate Porous and “as-received” Titanium Surfaces

For the design of smart titanium implants, it is essential to balance the surface properties without any detrimental effect on the bulk properties of the material. Therefore, in this study, an irradiation-driven surface modification called directed irradiation synthesis (DIS) has been developed to nanopattern porous and “as-received” c.p. Ti surfaces with the aim of improving cellular viability. Nanofeatures were developed using singly-charged argon ions at 0.5 and 1.0 keV energies, incident angles from 0° to 75° degrees, and fluences up to 5.0 × 1017 cm−2. Irradiated surfaces were evaluated by scanning electron microscopy, atomic force microscopy and contact angle, observing an increased hydrophilicity (a contact angle reduction of 73.4% and 49.3%) and a higher roughness on both surfaces except for higher incident angles, which showed the smoothest surface. In-vitro studies demonstrated the biocompatibility of directed irradiation synthesis (DIS) reaching 84% and 87% cell viability levels at 1 and 7 days respectively, and a lower percentage of damaged DNA in tail compared to the control c.p. Ti. All these results confirm the potential of the DIS technique to modify complex surfaces at the nanoscale level promoting their biological performance.

Sub-Micropillar Spacing Modulates the Spatial Arrangement of Mouse MC3T3-E1 Osteoblastic Cells

Surface topography is one of the main factors controlling cell responses on implanted devices and a proper definition of the characteristics that optimize cell behavior may be crucial to improve the clinical performances of these implants. Substrate geometry is known to affect cell shape, as cells try to optimize their adhesion by adapting to the irregularities beneath, and this in turn profoundly affects their activity. In the present study, we cultured murine calvaria MC3T3-E1 cells on surfaces with pillars arranged as hexagons with two different spacings and observed their morphology during adhesion and growth. Cells on these highly ordered substrates attached and proliferated effectively, showing a marked preference for minimizing the inter-pillar distance, by following specific pathways across adjacent pillars and displaying consistent morphological modules. Moreover, cell behavior appeared to follow tightly controlled patterns of extracellular protein secretion, which preceded and matched cells and, on a sub-cellular level, cytoplasmic orientation. Taken together, these results outline the close integration of surface features, extracellular proteins alignment and cell arrangement, and provide clues on how to control and direct cell spatial order and cell morphology by simply acting on inter-pillar spacing.

Human Stem Cell Responses and Surface Characteristics of 3D Printing Co-Cr Dental Material

Recently, the selective laser melting (SLM) method of manufacturing three dimensional (3D) dental prosthetics by applying a laser to metal powder has been widely used in the field of dentistry. This study investigated human adipose derived stem cell (hADSC) behavior on a 3D printed cobalt-chrome (Co-Cr) alloy and its surface characteristics and compared them those of a nickel-chrome (Ni-Cr) alloy. Alloys were divided into four groups according to the material and manufacturing methods. Co-Cr disks were manufactured with three different methods: a conventional casting method, a metal milling method, and an SLM method. Ni-Cr disks were manufactured with a conventional casting method. The surface roughness and compositions of the disks were assessed. hADSCs were then cultured on the disks. Cell morphologies on the disks were analyzed by a field emission scanning electron microscope (FE-SEM). Cell proliferation was assessed with a bromodeoxyuridine (BrdU) assay kit. Cell viability was evaluated with a water-soluble tetrazolium salt (WST) assay kit. There were no differences in surface roughness between all groups. The cells were well attached to the disks, and morphologies of the cells were similar. The cell proliferation and viability of the Ni-Cr disks were significantly lower than the other groups. However, the Co-Cr disks showed no differences in their different fabricating methods. In conclusion, the biocompatibility of 3D printed Co-Cr alloys showed comparable results compared to that of the conventional casting method, and these alloys were more biocompatible than Ni-Cr alloys.

Effect of Mother’s Age and Pathology on Functional Behavior of Amniotic Mesenchymal Stromal Cells—Hints for Bone Regeneration

Human amnion-derived mesenchymal stromal cells (hAMSCs) are used increasingly in regenerative medicine applications, including dentistry. The aim of this study was to evaluate if hAMSCs from aged and pathological mothers could be affected in their phenotype and functional behavior. hAMSCs were isolated from placentas of women aged younger than 40 years (Group 1, n = 7), older than 40 years (Group 2, n = 6), and with pre-eclampsia (Group 3, n = 5). Cell yield and viability were assessed at isolation (p0). Cell proliferation was evaluated from p0 to p5. Passage 2 was used to determine the phenotype, the differentiation capacity, and the adhesion to machined and sandblasted titanium disks. hAMSCs recovered from Group 3 were fewer than in Group 1. Viability and doubling time were not different among the three groups. Percentages of CD29+ cells were significantly lower in Group 3, while percentages of CD73+ cells were significantly lower in Groups 2 and 3 as compared with Group 1. hAMSCs from Group 2 showed a significant lower differentiation capacity towards chondrogenic and osteogenic lineages. hAMSCs from Group 3 adhered less to titanium surfaces. In conclusion, pathology can affect hAMSCs in phenotype and functional behavior and may alter bone regeneration capacities.

Disproportionate Effect of Sub-Micron Topography on Osteoconductive Capability of Titanium

Titanium micro-scale topography offers excellent osteoconductivity and bone-implant integration. However, the biological effects of sub-micron topography are unknown. We compared osteoblastic phenotypes and in vivo bone and implant integration abilities between titanium surfaces with micro- (1-5 µm) and sub-micro-scale (0.1-0.5 µm) compartmental structures and machined titanium. The calculated average roughness was 12.5 ± 0.65, 123 ± 6.15, and 24 ± 1.2 nm for machined, micro-rough, and sub-micro-rough surfaces, respectively. In culture studies using bone marrow-derived osteoblasts, the micro-rough surface showed the lowest proliferation and fewest cells attaching during the initial stage. Calcium deposition and expression of osteoblastic genes were highest on the sub-micro-rough surface. The bone-implant integration in the Sprague-Dawley male rat femur model was the strongest on the micro-rough surface. Thus, the biological effects of titanium surfaces are not necessarily proportional to the degree of roughness in osteoblastic cultures or in vivo. Sub-micro-rough titanium ameliorates the disadvantage of micro-rough titanium by restoring cell attachment and proliferation. However, bone integration and the ability to retain cells are compromised due to its lower interfacial mechanical locking. This is the first report on sub-micron topography on a titanium surface promoting osteoblast function with minimal osseointegration.

Bioactive Titanium Surfaces: Interactions of Eukaryotic and Prokaryotic Cells of Nano Devices Applied to Dental Practice

Background: In recent years, many advances have been made in the fields of bioengineering and biotechnology. Many methods have been proposed for the in vitro study of anatomical structures and alloplastic structures. Many steps forward have been made in the field of prosthetics and grafts and one of the most debated problems lies in the biomimetics and biocompatibility of the materials used. The contact surfaces between alloplastic material and fabric are under study, and this has meant that the surfaces were significantly improved. To ensure a good contact surface with the cells of our body and be able to respond to an attack by a biofilm or prevent the formation, this is the true gold standard. In the dental field, the study of the surfaces of contact with the bone tissue of the implants is the most debated, starting from the first concepts of osteointegration. Method: The study searched MEDLINE databases from January 2008 to November 2018. We considered all the studies that talk about nanosurface and the biological response of the latter, considering only avant-garde works in this field. Results: The ultimate aim of this study is to point out all the progress made in the field of bioengineering and biotechnologies about nanosurface. Surface studies allow you to have alloplastic materials that integrate better with our body and allow more predictable rehabilitations. Particularly in the field of dental implantology the study of surfaces has allowed us to make huge steps forward in times of rehabilitation. Overcoming this obstacle linked to the time of osseointegration, however, today the real problem seems to be linked to the “pathologies of these surfaces”, or the possible infiltration, and formation of a biofilm, difficult to eliminate, being the implant surface, inert. Conclusions: The results of the present investigation demonstrated how nanotechnologies contribute substantially to the development of new materials in the biomedical field, being able to perform a large number of tests on the surface to advance research. Thanks to 3D technology and to the reconstructions of both the anatomical structures and eventually the alloplastic structures used in rehabilitation it is possible to consider all the mechanical characteristics too. Recent published papers highlighted how the close interaction between cells and the biomaterial applied to the human body is the main objective in the final integration of the device placed to manage pathologies or for rehabilitation after a surgical tumor is removed.

Advances in Porous Scaffold Design for Bone and Cartilage Tissue Engineering and Regeneration

IMPACT STATEMENT

Challenges in musculoskeletal tissue regeneration affect millions of patients globally. Scaffolds for tissue engineering bone and cartilage provide promising solutions that increase healing and decrease need for complicated surgical procedures. Porous scaffolds have emerged as an attractive alternative to traditional scaffolds. However, the success of advanced materials, use of biological factors, and manufacturing techniques can vary depending on use case. This review provides perspective on porous scaffold manufacturing, characterization and application, and can be used to inform future scaffold design.

Surface engineering of titanium-based implants using electrospraying and dip coating methods

Titanium and its alloys due to their low density, good mechanical and biological properties are of the most common orthopedic metals. One of the main challenges regarding to titanium implants is their loosening after long term implantation in patient's body. Many methods such as alteration in surface topography with focus on improving osseointegration or biocompatibility in overall are supposed to overcome this issue. In this research, titanium surface topography is altered via electrospraying a solution of titanium salt, carrier polymer (polyvinylpyrrolidone) and solvents. The dip coated samples in the same solution are prepared and investigated as control. The electrosprayed or dip coated samples were pyrolysised in furnace at 500 °C to remove polymeric components. Then the stabilized microstructures on the surfaces were evaluated via scanning electron microscopy (SEM), water contact angle (WCA) measurement, X-ray diffraction (XRD) and atomic force microscope (AFM). Also, in order to study the bioactivity of modified samples, they were immersed in simulated body fluid (SBF) and their precipitates were studied. The cellular investigations were done by studying the cell morphology, MTT and alkaline phosphatase (ALP) activity assays. The results showed improvement in bioactivity and cellular response for DP3 and SP15 more than other samples implying the promising potential of these two approaches for titanium implant surface modification.

Titanium Surface Properties Influence the Biological Activity and FasL Expression of Craniofacial Stromal Cells

Mesenchymal stromal cells (MSCs) can be easily isolated form craniofacial bones during routine dentistry procedures. Due to their embryological origin from neural crest, they represent a suitable cell population to study cell-biomaterial interaction in the craniofacial field, including osteoinductive/osteointegrative processes. The biological and immunomodulatory properties of MSCs may be influenced by chemistry and topography of implant surfaces. We investigated if and how three different titanium surfaces, machined (MCH), sandblasted with resorbable blasting medium (RBM), and Ca⁺⁺-nanostructured (NCA), may affect biological activity, osseointegration, and immunomodulatory properties of craniofacial MSCs. Cell proliferation, morphology, osteogenic markers, and FasL were evaluated on MSCs isolated from the mandibular bone after seeding on these three different surfaces. No statistically significant differences in cell proliferation were observed whereas different morphologies and growth patterns were detected for each type of surface. No difference in the expression of osteogenic markers was revealed. Interestingly, FasL expression, involved in the immunomodulatory activity of stem cells, was influenced by surface properties. Particularly, immunofluorescence analysis indicated that FasL expression increased on MCH surface compared to the others confirming the suggested role of FasL in promoting osteogenic differentiation. Titanium surface treatments and topography might reflect different biological behaviours of craniofacial MSCs and influence their osseointegration/immunomodulation properties.

Glancing-Angle Deposition of Nanostructures on an Implant Material Surface

Cell-compatible and antibacterial surfaces are needed for implants, which frequently have complex and rough surfaces. Bio-inspired columnar nanostructures can be grown on flat substrates; however, the application of these nanostructures on clinically relevant, complex, and rough surfaces was pending. Therefore, a titanium plasma spray (TPS) implant surface was coated with titanium nano-spikes via glancing angle magnetron sputter deposition (GLAD) at room temperature. Using GLAD, it was possible to cover the three-dimensional, highly structured macroscopic surface (including cavities, niches, clefts, and curved areas) of the TPS homogeneously with nano-spikes (TPS+), creating a cell-compatible and antibacterial surface. The adherence and spreading of mesenchymal stem cells (MSC) were similar for TPS and TPS+ surfaces. However, MSC adherent to TPS+ expressed less and shorter pseudopodia. The induced osteogenic response of MSC was significantly increased in cells cultivated on TPS+ compared with TPS. In addition, Gram-negative bacteria (E. coli) adherent to the nano-spikes were partly destructed by a physico-mechanical mechanism; however, Gram-positive bacteria (S. aureus) were not significantly damaged.

Neuronal PAS domain 2 (Npas2) facilitated osseointegration of titanium implant with rough surface through a neuroskeletal mechanism

Titanium (Ti) biomaterials have been applied to a wide range of implantable medical devices. When placed in bone marrow, Ti-biomaterials integrate to the surrounding bone tissue by mechanisms that are not fully understood. We have previously identified an unexpected upregulation of circadian clock molecule neuronal PAS domain 2 (Npas2) in successfully integrated implant with a rough surface. This study aimed to elucidate the molecular mechanism of osseointegration through determining the role of Npas2. Human bone marrow stromal cells (BMSC) that were cultured on a Ti disc with SLA surface exhibited increased NPAS2 expression compared to BMSC cultured on a machined surface. A mouse model was developed in which miniature Ti implants were surgically placed into femur bone marrow. The implant push-out test and bone-to-implant contact measurements demonstrated the establishment of osseointegration in 3 weeks. By contrast, in Npas2 functional knockout (KO) mice, the implant push-out value measured for SLA surface Ti implant was significantly decreased. Npas2 KO mice demonstrated normal femur bone structure surrounding the Ti implant; however, the recovered implants revealed abnormal remnant mineralized tissue, which lacked dense collagen architecture typically found on recovered implants from wild type mice. To explore the mechanisms leading to the induced Npas2 expression, an unbiased chemical genetics analysis was conducted using mouse BMSC carrying an Npas2-reporter gene for high throughput screening of Library of Pharmacologically Active Compounds. Npas2 modulating compounds were found clustered in regulatory networks of the α2-adrenergic receptor and its downstream cAMP/CREB signaling pathway. Mouse primary BMSC exposed to SLA Ti disc significantly increased the expression of α2-adrenergic receptors, but the expression of β2-adrenergic receptor was unaffected. Our data provides the first evidence that peripheral clock gene component Npas2 plays a role in facilitating the enhanced osseointegration through neuroskeletal regulatory pathways induced by BMSC in contact with rough surface Ti implant.

Interfacial biomechanical properties of a dual acid-etched versus a chemically modified hydrophilic dual acid-etched implant surface: an experimental study in Beagles

BACKGROUND

The high survival clinical success rates of osseointegration are requisites for establishing a long-term biomechanical fixation and load-bearing potential of endosseous oral implants. The objective of this preclinical animal study was to evaluate the effect of surface microtopography and chemistry on the early stages of biomechanical rigidity with a sandblasted, dual acid-etched surface, with or without an additional chemical modification (SAE-HD and SAE, respectively), in the tibia of Beagle dogs.

METHODS

Two pairs of implants, with the same macrogeometry but different surface technology ((a) dual acid-etched surface treatment with hydrochloric and sulfuric acid followed by microwave treatment and insertion in isotonic saline solution to increase hydrophilicity (SAE-HD) (test, n = 12) and (b) dual acid-etched surface (SAE) (control, n = 12)), were installed bilaterally in the proximal tibia of six Beagle dogs. In order to determine the effect of surface modification on biomechanical fixation, a test protocol was established to assess the torque and a complete set of intrinsic properties. Maximum removal torque (in N cm) was the primary outcome measure, while connection stiffness (N cm/rad) and removal energy (× 10^-2J) were the secondary outcome measures and were assessed after 2 and 4 weeks in vivo. A general linear statistical model was used and performed for significant differences with the one-way ANOVA followed by Tukey post hoc test (P < 0.05).

RESULTS

The removal torque values did not reveal significant statistical differences between SAE-HD and SAE implants at any observation times (P = 0.06). Although a slight increase over time could be observed in both test and control groups. SAE-HD showed higher removal energy at 4 weeks (999.35 ± 924.94 × 10^- 2 J) compared to that at 2 weeks (421.94 ± 450.58 × 10^- 2 J), while SAE displayed lower values at the respective healing periods (P = 0.16). Regarding connection stiffness, there were no significant statistical differences neither within the groups nor over time. There was a strong, positive monotonic correlation between removal torque and removal energy (=0.722, n = 19, P < 0.001).

CONCLUSIONS

In this study, no significant differences were observed between the specific hydrophilic (SAE-HD) and hydrophobic (SAE) surfaces evaluated, in terms of biomechanical properties during the early osseointegration period.

Graftless Maxillary Sinus Lift Using Lateral Window Approach: A Systematic Review

PURPOSE

The aim was to determine the survival rate of dental implants installed in the posterior region of the maxilla after a graftless maxillary sinus lift via the lateral window approach and to identify the factors involved in the results.

MATERIALS AND METHODS

A systematic search was done on MEDLINE, EMBASE, LILACS, Scopus, and Science Direct up to June 2016; additional studies were identified through an analysis of references. Primary studies in English, Spanish, Portuguese, and French were included; the selection and data extraction process was conducted by 2 investigators independently, and the methodological quality was evaluated by means of the Effective Public Health Practice Project's Quality Assessment Tool.

RESULTS

The combined search identified 232 articles. After the selection process, 11 articles were identified, 9 of which were prospective and 2 were retrospective. In all of them, the graftless maxillary sinus lift was done with the immediate installation of the implant. All the studies included presented a low methodological quality. The mean survival rate of the implants was 97% with an average new intrasinus bone formation of 6.2 mm.

CONCLUSION

This technique has a high implant survival although it is not possible to identify its correct indication and contraindication.

Short Implants and Conventional Implants in The Residual Maxillary Alveolar Ridge: A 36-Month Follow-Up Observation

BACKGROUND Short dental implants are considered an alternative method of treatment to the maxillary sinus elevation and bone augmentation procedure at the sites of a reduced alveolar ridge height. The aim of the study was to determine the most effective therapeutic approach for a single tooth replacement in a reduced maxillary alveolar crest. MATERIAL AND METHODS We enrolled 30 partially edentulous patients having a residual crestal height of 6 mm and a minimal width of the alveolar ridge of 6-7 mm: 15 patients received regular dental implants (OsseoSpeed™ L11 Ø4 mm and L13 Ø4 mm) and the implantation was preceded by the sinus lift procedure from a lateral window approach with the application of a xenogeneic bone graft, whereas the remaining 15 patients received short implants (OsseoSpeed™ L6 mm Ø4 mm) without the sinus lift and augmentation procedure. All implants were loaded with single non-splinted crowns. Radiological examination (CBCT, RVG) was performed before the surgery and after 36 months. Primary and secondary stabilization with Osstell ISQ® and Periotest® were assessed. RESULTS Good results in primary and secondary stability were achieved in both systems. The marginal bone level (MBL) loss was low (0.22±0.46 mm and 0.34±0.24 mm, for short and conventional implants, respectively). No significant difference in MBL between groups was found. CONCLUSIONS Short implants can be successfully used to support single crowns in the lateral part of the maxilla.

Role of Wnt11 during Osteogenic Differentiation of Human Mesenchymal Stem Cells on Microstructured Titanium Surfaces

Successful osseointegration of an endosseous implant involves migration and differentiation of mesenchymal stem cells (MSCs) on the implant surface. Micro-structured, hydrophilic titanium surfaces direct MSCs to undergo osteoblastic differentiation in vitro, in the absence of media additives commonly used in cultures grown on tissue culture polystyrene (TCPS). This process involves non-canonical Wnt5a, in contrast to canonical Wnt3a typically credited with osteoblastic differentiation on TCPS. Wnt proteins have been implicated in morphological development and tissue patterning, suggesting that additional Wnts may participate. Here, we demonstrate that Wnt11 is a mediator of osteoblast commitment of MSCs, and increases in a surface-roughness dependent manner. Experiments using cells silenced for Wnt11 indicate that cross-talk between Wnt5a and Wnt11 occurs. Wnt11 potentially acts upstream to Wnt5a, increasing Wnt5a expression and factors associated with osteogenesis. Thus, Wnt11 contributes to peri-implant bone formation distal to the implant surface through a heavily regulated signaling cascade of autocrine/paracrine proteins.

Early cell response of osteogenic cells on differently modified implant surfaces: Sequences of cell proliferation, adherence and differentiation

OBJECTIVES

Osseointegration of dental implants is a crucial prerequisite for long-term survival. Therefore, surface modifications are needed to interact with the extracellular environment and to trigger osteogenic cell responses such as cell proliferation, adherence, and differentiation. The purpose of this study was to investigate different surface modifications in vitro over 2 weeks.

MATERIALS AND METHODS

Commercially available cells from a human osteogenic cell line (HHOB-c) were cultivated on the following surfaces: titanium with smooth surfaces (polished titanium (P), machined titanium (M), polyetheretherketone (Peek)), titanium with rough and hydrophilised surfaces (acid etched titanium (A), sandblasted acid etched titanium (SA and SA2), sandblasted acid etched hydrophilised (SAH), titanium plasma painted titanium (TPS)), titanium with calcium phosphate-containing surfaces (titanium plasma painted calcium phosphate modified titanium (TPS-CaP), sandblasted calcium phosphate modified titanium (S-CaP), sandblasted acid etched calcium phosphate modified titanium (SA-CaP)), and zirconium-oxide (yttrium amplified zirconium (Z), yttrium amplified Ca²⁺ delivering zirconium (Z-Ca)). Tissue culture polystyrene (TCPS) served as a control. Cell count was assessed after 24 h, 48 h, 72 h, 7 d, and 14 d; osteogenic cell adherence and differentiation were analysed by using cellular Quantitative Immuno-Cytochemistry (QIC) assay for alkaline phosphatase (AP), osteocalcin (OC), integrin alpha V (ITGAV), and talin (T).

RESULTS

All tested surfaces showed a positive influence on the differentiation and adherence of osteogenic cells, especially P, M, A, TCPS, and Peek. After 48 h, the surfaces M, SA and SAH had induced a positive influence on adherence, whereas SA2, SA, and SAH triggered proliferation after 14 d.

CONCLUSIONS

Rough and hydrophilised surface modifications, such as SAH, trigger osteogenic cell responses. These in vitro results highlight the potential use of SAH surface modifications of dental implants and indicate further clinical studies are warranted.

TiN x O y coatings facilitate the initial adhesion of osteoblasts to create a suitable environment for their proliferation and the recruitment of endothelial cells

Titanium-nitride-oxide coatings (TiN _x O _y ) improve osseointegration of endosseous implants. The exact mechanisms by which these effects are mediated are poorly understood except for an increase of osteoblast proliferation while a high degree of differentiation is maintained. One hypothesis holds that TiN _x O _y facilitates the initial spreading and adhesion of the osteoblasts. The aim of this work was to investigate the molecular mechanisms of osteoblast adhesion on TiN _x O _y as compared to microrough titanium SLA. A global view of the osseointegrative process, that is, taking into account other cell groups, especially endothelial cells, is also presented. To this aim, gene expression and focal adhesion analysis, cocultures and wound assays were performed early after seeding, from 6 h to 3 days. We demonstrated that TiN _x O _y coatings enhance osteoblast adhesion and spreading when compared to the standard microrough titanium. The integrin β1, either in association with α1 or with α2 plays a central role in these mechanisms. TiN _x O _y coatings optimize the process of osseointegration by acting at several levels, especially by upregulating osteoblast adhesion and proliferation, but also by supporting neovascularization and the development of a suitable inflammatory environment.

Harnessing Wharton's jelly stem cell differentiation into bone-like nodule on calcium phosphate substrate without osteoinductive factors

An important aim of bone regenerative medicine is to design biomaterials with controlled chemical and topographical features to guide stem cell fate towards osteoblasts without addition of specific osteogenic factors. Herein, we find that sprayed bioactive and biocompatible calcium phosphate substrates (CaP) with controlled topography induce, in a well-orchestrated manner, Wharton's jelly stem cells (WJ-SCs) differentiation into osteoblastic lineage without any osteogenic supplements. The resulting WJ-SCs commitment exhibits features of native bone, through the formation of three-dimensional bone-like nodule with osteocyte-like cells embedded into a mineralized type I collagen. To our knowledge, these results present the first observation of a whole differentiation process from stem cell to osteocytes-like on a synthetic material. This suggests a great potential of sprayed CaP and WJ-SCs in bone tissue engineering. These unique features may facilitate the transition from bench to bedside and the development of successful engineered bone.

STATEMENT OF SIGNIFICANCE

Designing materials to direct stem cell fate has a relevant impact on stem cell biology and provides insights facilitating their clinical application in regenerative medicine. Inspired by natural bone compositions, a friendly automated spray-assisted system was used to build calcium phosphate substrate (CaP). Sprayed biomimetic solutions using mild conditions led to the formation of CaP with controlled physical properties, good bioactivity and biocompatibility. Herein, we show that via optimization of physical properties, CaP substrate induce osteogenic differentiation of Wharton's jelly stem cells (WJ-SCs) without adding osteogenic supplement factors. These results suggest a great potential of sprayed CaP and WJ-SCs in bone tissue engineering and may facilitate the transition from bench to beside and the development of clinically successful engineered bone.