Influence of Ankle Position and Radiographic Projection Angle on Measurement of Supramalleolar Alignment on the Anteroposterior and Hindfoot Alignment Views

Morphological changes in flatfoot: a 3D analysis using weight-bearing CT scans

BACKGROUND

Flatfoot is a condition resulting from complex three-dimensional (3D) morphological changes. Most Previous studies have been constrained by using two-dimensional radiographs and non-weight-bearing conditions. The deformity in flatfoot is associated with the 3D morphology of the bone. These morphological changes affect the force line conduction of the hindfoot/midfoot/forefoot, leading to further morphological alterations. Given that a two-dimensional plane axis overlooks the 3D structural information, it is essential to measure the 3D model of the entire foot in conjunction with the definition under the standing position. This study aims to analyze the morphological changes in flatfoot using 3D measurements from weight-bearing CT (WBCT).

METHOD

In this retrospective comparative our CT database was searched between 4-2021 and 3-2022. Following inclusion criteria were used: Patients were required to exhibit clinical symptoms suggestive of flatfoot, including painful swelling of the medial plantar area or abnormal gait, corroborated by clinical examination and confirmatory radiological findings on CT or MRI. Healthy participants were required to be free of any foot diseases or conditions affecting lower limb movement. After applying the exclusion criteria (Flatfoot with other foot diseases), CT scans (mean age = 20.9375, SD = 16.1) confirmed eligible for further analysis. The distance, angle in sagittal/transverse/coronal planes, and volume of the two groups were compared on reconstructed 3D models using the t-test. Logistic regression was used to identify flatfoot risk factors, which were then analyzed using receiver operating characteristic curves and nomogram.

RESULT

The flatfoot group exhibited significantly lower values for calcaneofibular distance (p = 0.001), sagittal and transverse calcaneal inclination angle (p < 0.001), medial column height (p < 0.001), sagittal talonavicular coverage angle (p < 0.001), and sagittal (p < 0.001) and transverse (p = 0.015) Hibb angle. In contrast, the sagittal lateral talocalcaneal angle (p = 0.013), sagittal (p < 0.001) and transverse (p = 0.004) talocalcaneal angle, transverse talonavicular coverage angle (p < 0.001), coronal Hibb angle (p < 0.001), and sagittal (p < 0.001) and transverse (p = 0.001) Meary's angle were significantly higher in the flatfoot group. The sagittal Hibb angle (B =  - 0.379, OR = 0.684) and medial column height (B =  - 0.990, OR = 0.372) were identified as significant risk factors for acquiring a flatfoot.

CONCLUSION

The findings validate the 3D spatial position alterations in flatfoot. These include the abduction of the forefoot and prolapse of the first metatarsal proximal, the arch collapsed, subluxation of the talonavicular joint in the midfoot, adduction and valgus of the calcaneus, adduction and plantar ward movement of the talus in the hindfoot, along with the first metatarsal's abduction and dorsiflexion in the forefoot.

Weight-Bearing CT for Diseases around the Ankle Joint

Weight-bearing computed tomography (WBCT) enables acquisition of three-dimensional bony structure images in a physiological weight-bearing position, which is fundamental in understanding the pathologic lesions and deformities of the ankle joint. Over the past decade, researchers have focused on validating and developing WBCT measurements, which has significantly enhanced our knowledge of common foot and ankle diseases. Consequently, understanding the application of WBCT in clinical practice is becoming more important to produce improved outcomes in the treatment of disease around the ankle joint. This review will describe an overview of what is currently being evaluated in foot and ankle surgery using WBCT and where the course of research will be heading in the future.

Talar neck rotation angle in adults with clubfoot deformity: Observed values and intra- and inter-observer reliability using weightbearing CT

INTRODUCTION

Adults presenting with symptomatic clubfoot represent a challenging cohort of patients. An appreciation of the location and degree of deformities is essential for management. Talar anatomy is often abnormal with varus within the talar neck, however, there are few reproducible methods which quantify talar neck deformity in adults. We describe a technique of assessing talar neck deformity, and report on observed values and intra- / inter-observer reliability.

METHODS

This was a single-centre, retrospective study including 96 feet from 56 adult patients with clubfeet (82 feet had clubfoot deformity, 14 were normal). Mean age was 34.3 ± 16.9 years and 31 (55.3%) were male. Weight-bearing CT scans captured as part of routine clinical care were analysed. Image reformats were oriented parallel to the long axis of the talus in the sagittal plane. In the corresponding axial plane two lines were drawn (on separate slices): 1) a line perpendicular to the intermalleolar axis, 2) a line connecting the midpoints of the talar head and narrowest part of the talar neck. The talar neck rotation angle (TNR angle) was the angle formed between these lines. Intraclass correlation coefficients (ICC) were performed for intra- and inter-observer reliability.

RESULTS

Mean TNR angle in clubfeet was 27.6 ± 12.2 degrees (95%CI = 25.0 to 30.2 degrees). Mean TNR angle in normal feet was 18.7 ± 5.1 degrees (95%CI = 16.0 to 21.4 degrees) (p < 0.001). The ICC for clubfeet was 0.944 (95%CI = 0.913 to 0.964) for intra-observer agreement, and 0.896 (95%CI = 0.837 to 0.932) for inter-observer agreement.

CONCLUSION

This measurement technique demonstrated excellent intra- and inter-observer agreement. It also demonstrated that compared to normal feet, clubfeet had about 9 degrees of increased varus angulation of the talar neck. This technique and data may be used for future research into clubfoot deformity and in planning treatment.

LEVEL OF CLINICAL EVIDENCE

3.

Supramalleolar Osteotomies in Cavovarus Foot Deformity: Why Patient-Specific Instruments Make a Difference

Supramalleolar osteotomy enables correction of the ankle varus deformity and is associated with improvement of pain and function in the short term and long term. Despite these beneficial results, the amount of surgical correction is challenging to titrate and the procedure remains technically demanding. Most supramalleolar osteotomies are currently planned preoperatively on 2-dimensional weight-bearing radiographs and executed peroperatively using free-hand techniques. This article encompasses 3-dimensional planning and printing techniques based on weight-bearing computed tomography images and patient-specific instruments to correct ankle varus deformities.

Weight-Bearing Computed Tomography of the Foot and Ankle-What to Measure?

Weight-bearing computed tomography (WBCT) was introduced in 2012 for foot and ankle applications as a breakthrough technology that enables full weight-bearing, three-dimensional imaging unaffected by x-ray beam projections or foot orientation. The literature describing the use of WBCT in the treatment of foot and ankle disorders is growing, and this article provides an overview of what can be measured with WBCT.

Reliability of Cone Beam Weightbearing Computed Tomography Analysis of Total Ankle Arthroplasty Positioning and Comparison to Weightbearing X-Ray Measurements

BACKGROUND

The current reference standard for postoperative evaluation of total ankle arthroplasty (TAA) positioning, weightbearing radiography (WBXR), is subject to technical bias. Weightbearing cone beam computed tomography (WBCT) enables visualization of the foot's complex 3-dimensional (3D) structure under standing load. To date, no WBCT-based system for TAA positioning has been validated. The purpose of this study was to (1) assess TAA positioning using WBCT 3D models and (2) evaluate the agreement levels between 2 raters and thus evaluate the intermethod reliability with respect to WBXR.

METHODS

Fifty-five consecutive patients were retrospectively reviewed. Two raters independently created a 3D WBCT model using dedicated software and recorded the following measurements: α angle, tibiotalar surface angle (TSA), hindfoot angle (HFA), tibiotalar ratio (TTR), β angle, γ angle, and Φ angle. Measurements were repeated 2 months apart in similar, independent fashion and compared to WBXR. Interobserver, intraobserver, and intermethod agreements were calculated.

RESULTS

All 7 measurements showed good to excellent intraobserver and interobserver reliability (ICC 0.85-0.95). The intermethod (WBCT vs WBXR) agreement showed good agreement for the γ angle (ICC 0.79); moderate agreement levels for the α angle, TSA angle, β angle, and TTR (ICC 0.68, 0.69, 0.70, and 0.69, respectively); poor agreement for the HFA (ICC 0.25); and negative agreement for the φ angle (ICC -0.2).

CONCLUSION

Position analysis of TAA using WBCT demonstrated good to excellent interobserver and intraobserver agreement and can be reliably used. Additionally, a negative to moderate agreement between standard WBCT and standard WBXR was found.

LEVEL OF EVIDENCE

Level III, retrospective study.

Effect of total ankle replacement on the 3-dimensional subtalar joint alignment in varus ankle osteoarthritis

BACKGROUND

Varus ankle osteoarthritis (OA) is typically associated with peritalar instability, which may result in altered subtalar joint position. This study aimed to determine the extent to which total ankle replacement (TAR) in varus ankle OA can restore the subtalar alignment.

METHODS

Fourteen patients (15 ankles, mean age 61 ± 6 years) who underwent TAR for varus ankle OA were analyzed using semi-automated measurements based on weight-bearing computed tomography. Twenty healthy individuals served as a control group.

RESULTS

All angles improved between preoperative and a minimum of 1 year (mean 2.1 years) postoperative and were statistically significant in 6 out of 8 angles (P < 0.05).

CONCLUSIONS

Our findings indicate that talus repositioning after TAR restores the subtalar joint alignment which may improve hindfoot biomechanics. Future studies are required to implement these findings for TAR in presence of hindfoot deformity.

LEVEL OF EVIDENCE

IV.

Definitions and Measurements of Hindfoot Alignment and Their Biomechanical and Clinical Implications

This article presents a critical review of the past and the current state of the art in defining and measuring hindfoot, ankle, and subtalar alignment. It describes the transition occurring at present from two-dimensional to three-dimensional (3D) alignment measurements, which accompany the emergence of new, functional, high-resolution imaging modalities such as the weight-bearing cone-beam computerized tomography (CT) imaging. To ease and enhance the transition and acceptability of 3D alignment measurements, new acceptable standards for different clinical application are highly desirable.

Extreme nailing and immediate weight bearing constructs in fractures of the distal tibia

Extraarticular fractures of the distal tibia can present as difficult but manageable lower extremity injuries. Historically, these injuries have been fixed in a myriad of ways. Early management with intramedullary nailing had higher complication rates due to the unique anatomical and biomechanical features of the distal tibia. Modern improvements in intramedullary nailing surgical techniques and implant design have significantly decreased complication rates and led to improvement in patient outcomes. Many surgeons protect weight bearing postoperatively, but recent literature suggests that patients may safely weight bear immediately following intramedullary fixation. This article reviews technique and implant design changes that have facilitated immediate safe weight bearing following intramedullary nailing of extraarticular distal tibia fractures.

Evaluation and Management of Adolescents With a Stiff Flatfoot

While flatfeet are normal in children, persistence into adolescence with associated pain or asymmetry warrants additional evaluation. Rigidity of a flatfoot deformity, whether a clinical report or evident on examination, should raise suspicion for pathology. The differential diagnosis includes tarsal coalition, neurogenic planovalgus, and peroneal spasticity. History must include pointed inquiry into birth and neurologic histories to probe for a source of central spasticity. Examination must include standing assessment of hindfoot and midfoot alignment. Hindfoot rigidity may be assessed by the double limb heel rise test and manual examination. Radiographs should include standing ankle (anterior-posterior and mortise) and whole foot (anterior-posterior, external rotation oblique, and lateral) images. Magnetic resonance imaging is more sensitive for identifying coalitions and better characterizes adjacent cartilage, subchondral edema, and tendon pathology, yet CT better characterizes the anatomy of a bony coalition. Conservative treatments are pathology-dependent and play a more prominent role in neurogenic or peroneal spastic flatfoot. Surgical management of coalitions is centered on coalition resection coupled with arthrodesis in the case of a talocalcaneal coalition with a dysplastic subtalar joint; concomitant planovalgus reconstruction is considered on a case-by-case basis.

Weightbearing CT assessment of foot and ankle joints in Pes Planovalgus using distance mapping

INTRODUCTION

The goal of this study was to describe the abnormal joint surface interaction at the ankle, hindfoot and midfoot joints in patients presenting with Pes Planovalgus (PPV) using three-dimensional (3D) distance mapping on weightbearing computed tomography (WBCT) images by comparing a series of PPVs to a series of normally-aligned feet. We hypothesized that in PPVs joint interactions would reveal significantly increased spaces in the medial side of the ankle, hindfoot and midfoot joints.

METHODS

In this case-control study, ten feet (10 patients) with asymptomatic PPV were compared to 10 matched-paired (by age, gender and body mass index) normally-aligned feet (10 patients). Three-dimensional models were produced from the images and distance maps representing joint surface configuration were generated for the ankle, hindfoot and midfoot joints. The distance maps for each joint were then compared between the two groups and between regions in the same group.

RESULTS

In PPV patients there was a significantly increased surface-to-surface distance anteromedially at the ankle joint (+46.3%, p < 0.001) along with an increased distance on the anterior halves of both the medial (+21.3%, p = 0.098) and lateral malleoli (+22.7%, p = 0.038). At the posterolateral corner of the posterior facet of the subtalar joint we found an increased surface-to-surface distance (by 57.1%, p < 0.001), while at the talonavicular joint there was a reduction of the distance at the superomedial corner (-20%, p = 0.097) along with a significant increase in the upper central (+20%, p = 0.039) and lateral (+30.7%, p = 0.015) zones. A reduction of the surface-to-surface distance was also observed in three of the four zones of the calcaneocuboid joint. Finally, a statistically significant increase in the mean distance was observed at the naviculocuneiform and tarsometatarsal joints in a range between 38% and 93.4% (p < 0.001 in all cases).

CONCLUSION

We found significant differences in surface-to-surface interaction at the foot and ankle joints between Pes Planovalgus and normally-aligned controls. Distance mapping on WBCT images could be used in clinical practice as a diagnostic support to gauge the morphological changes of articular spaces occurring in Pes Planovalgus.

LEVEL OF EVIDENCE

Level III, case-control study.

Weight-Bearing Computed Tomography of the Foot and Ankle in the Pediatric Population

BACKGROUND

Newer cone-beam computed tomography (CT) technology has grown in popularity for evaluation of foot and ankle pathology in the weight-bearing (WB) position. Many studies have demonstrated its benefits within the adult population, but there is a paucity of its use within the pediatric literature. The purpose of this study was to describe the indications and clinical findings of WBCT within a pediatric population.

METHODS

A retrospective cohort of 68 patients (86 extremities) who underwent WBCT for a variety of conditions were compared with 48 patients (59 extremities) who underwent traditional supine nonweight-bearing (NWB) CTs. Clinical indications, demographic data, radiation doses, and cost were obtained from the medical record. WBCTs were obtained in a private outpatient orthopaedic clinic, and the conventional NWBCTs were obtained within a hospital-based system.

RESULTS

The most common indications for obtaining a WBCT and NWBCT in our study were fracture, tarsal coalition, and Lisfranc injury. The average WBCT radiation dose was 0.63 mGy for patients <100 lbs and 1.1 mGy for patients >100 lbs undergoing WBCT. For NWBCTs, the average radiation dose was 7.92 mGy for patients <100 lbs and 10.37 mGy for patients greater than 100 lbs. There was a significant reduction in radiation dose for all patients who underwent WBCT (P<0.0001 vs. 0.002). The average reimbursement for NWBCTs was $505 for unilateral studies and $1451 for bilateral studies. The average reimbursement for the WBCTs was $345 for unilateral studies and $635 for bilateral studies.

CONCLUSIONS

WBCT offers a new modality for studying complex foot and ankle pathoanatomy in the pediatric population at a reduced radiation exposure and reduced cost.

LEVEL OF EVIDENCE

Level III-a retrospective comparative study.

2D Manual vs 3D Automated Assessment of Alignment in Normal and Charcot-Marie-Tooth Cavovarus Feet Using Weightbearing CT

BACKGROUND

The complex deformities in cavovarus feet may be difficult to assess and understand. Weightbearing computed tomography (WBCT) is increasingly used in evaluating complex deformities. However, the bone axes may be difficult to calculate in the setting of severe deformity. Computer-assisted 3D axis calculation is a novel approach that may allow for more accurate assessment of foot alignment or deformity. This study aimed to assess differences in measurements done manually on 2D slices of WBCT vs 3D computer models in normal and cavus feet.

METHODS

We retrospectively analyzed WBCT scans from 16 normal and 16 cavus feet in patients with Charcot-Marie-Tooth disease. Six measurements were assessed: talar-first metatarsal angle (axial plane), forefoot arch angle (coronal plane), and Meary angle, calcaneal pitch, and cuneiform and navicular to floor distances (sagittal plane). 2D measurements were performed manually and 3D measurements were performed using specialized software (Bonelogic, DISIOR). Bland-Altman plots and linear regression were used to analyze differences.

RESULTS

There were no significant biases in measured variables in normal feet. In the cavovarus group, automated assessment calculated increased sagittal plane deformity (fixed bias 7.31 degrees for Meary angle, 2.39 degrees for calcaneal pitch) and less axial plane deformity (fixed bias 10.61 degrees for axial talar-first metatarsal angle). The latter also demonstrated proportional bias indicating greater discrepancy with increasing adduction.

CONCLUSION

Measurements were comparable in normal feet suggesting automated techniques can reliably assess the alignment of bony axes. However, automated calculations show greater sagittal and less axial deformity in cavovarus feet than measured by manual techniques. This discrepancy may relate to rotational deformity seen in cavovarus feet, which may not be easily assessed manually. 3D automated measurements may therefore play a role in better assessing and classifying the cavovarus foot, which may ultimately inform treatment algorithms.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Assessment of Flatfoot Deformity Using Digitally Reconstructed Radiographs: Reliability and Comparison to Conventional Radiographs

BACKGROUND

Digitally reconstructed radiographs (DRRs) generated from weightbearing computed tomography (WBCT) may potentially substitute for weightbearing plain radiographs (XRs) but have not been clinically validated. This study aims to test the reliability of 6 radiographic parameters of progressive collapsing foot deformity (PCFD) as measured on DRR, to investigate whether DRR represents comparably to XR through the same measurements, and to compare agreement of DRR and XR measurements of a standardized arch height parameter with reference measurements made on WBCT.

METHODS

DRR generated from preoperative WBCT of 71 patients (72 feet) treated surgically for PCFD were retrospectively compared with preoperative weight-bearing XR after exclusion criteria were applied. Six radiographic measurements were performed, including Meary angle, calcaneal pitch (CPA), medial cuneiform height (MCH), AP talar-first metatarsal angle (T-1MT), talonavicular coverage (TNCA), and talar incongruency (TIA). Arch height was measured on XR, DRR, and WBCT using a validated, standardized, navicular-based index. Intraclass correlation coefficients assessed DRR intraobserver and interobserver reliability. Paired samples t tests tested differences between XR and DRR. Bland-Altman limits of agreement analysis compared DRR and XR agreement with WBCT measurements.

RESULTS

Measurements were within standard PCFD ranges on XR and DRR. All measurements demonstrated excellent intrarater reliability and good to excellent interrater agreement, consistent with previous literature on XR. No differences were found for Meary, CPA, or TNCA. Minor differences were observed for MCH, T-1MT, and TIA. DRR measurements demonstrated greater agreement with WBCT than XR measurements.

CONCLUSION

DRR from WBCT may be a promising substitute for XR in the clinical evaluation of PCFD. Radiographic measurements made on DRR demonstrated good to excellent reliability. Although small differences were found between XR and DRR for certain measurements, DRR more accurately represented medial arch anatomy compared to gold standard WBCT data than XR. If validated as a clinical substitute, DRR could eventually obviate XR where WBCT is available.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Imaging of progressive collapsing foot deformity with emphasis on the role of weightbearing cone beam CT

The term progressive collapsing foot deformity (PCFD) is currently recommended as the replacement to adult-acquired flatfoot deformity and posterior tibial tendon dysfunction to better reflect its pathology, which consists of a complex three-dimensional deformity involving the foot and ankle. The new consensus has also provided a new classification that requires clinical and radiographic findings for patient stratification into each class. However, conventional radiographs are susceptible to errors resulting from the inadequate positioning of patients, incorrect angulation of the X-ray tube, and overlapping of bone structures. Weightbearing cone beam computed tomography (WBCBCT), which has greater diagnostic accuracy than conventional radiograph, is useful for evaluating progressive collapsing foot deformity to determine medial arch collapse, hindfoot alignment, peritalar subluxation, posterior subtalar joint valgus, intrinsic talus valgus, and lateral extra-articular bone impingement. The present review aimed to discuss the new recommendations for nomenclature, classification, and imaging evaluation of PCFD, with an illustrative and quantitative focus on the measurements used in conventional radiography and WBCBCT. The measurements presented here are important criteria for decision-making.

Radiographic parameters of the normal ankle syndesmosis: Comparison between hindfoot alignment view and anteroposterior view

OBJECTIVE

To compare the parameters associated with the normal ankle syndesmosis between the hindfoot alignment view (HAV) and anteroposterior (AP) view and determine which view is more accurate for comparing the left and right ankles.

METHODS

This study involved 61 subjects without syndesmosis injury who had radiographs of both ankles. The tibiofibular clear space (TFCS), tibiofibular overlap (TFO), and medial clear space (MCS) were measured in each view. Intraclass correlation coefficients were used to assess the agreement between the two ankles. Difference ratios for the measured parameters between the ankles were also compared.

RESULTS

The agreement for TFCS showed wide disparity between the two ankles (AP view, 0.576; HAV, 0.858). The highest degree of agreement was seen for TFO (AP view, 0.733; HAV, 0.926). The agreement for MCS was low in both groups. The mean difference ratio for TFCS was also lower in the HAV group (9.9%) than in the AP view group (16.4%); a similar result was observed for TFO (16.4% vs. 25.8%).

CONCLUSIONS

For evaluation of the syndesmosis, use of the HAV showed increased accuracy and few measurement errors when comparing the left and right ankles relative to use of the AP view.

Assessment of Progressive Collapsing Foot Deformity Using Semiautomated 3D Measurements Derived From Weightbearing CT Scans

BACKGROUND

In progressive collapsing foot deformity (PCFD), hind- and midfoot deformities can be hard to characterize based on weightbearing plain radiography. Semiautomated 3-dimensional (3D) measurements derived from weightbearing computed tomography (WBCT) scans may provide a more accurate deformity assessment. In the present study, automated 3D measurements based on WBCT were used to compare hindfoot alignment of healthy individuals to patients with PCFD.

METHODS

The WBCT scans of 20 patients treated at our institution with either a flexible (N = 10) or rigid (N = 10) PCFD were compared with the WBCT scans of a control group of 30 healthy individuals. Using semiautomated image analysis software, from each set of 3D voxel images, we measured the talar tilt (TT), hindfoot moment arm (HMA), talocalcaneal angle (TCA; axial/lateral), talonavicular coverage (TNC), and talocalcaneal overlap (TCO). The presence of medial facet subluxation as well as sinus tarsi/subfibular impingement was additionally assessed.

RESULTS

With the exception of the TCA (axial/lateral), the analyzed measurements differed between healthy individuals and patients with PCFD. The TCA axial correlated with the TNC in patients with PCFD. An increased TCO combined with sinus tarsi impingement raised the probability of predicting a deformity as rigid.

CONCLUSION

Using 3D measurements, in this relatively small cohort of patients, we identified relevant variables associated with a clinical presentation of flexible or rigid PCFD. An increased TCO combined with sinus tarsi impingement raised the probability of predicting a deformity as rigid. Such WBCT-based markers possibly can help the surgeon in decision-making regarding the appropriate surgical strategy (eg, osteotomies vs realignment arthrodesis). However, prospective studies are necessary to confirm the utility of the proposed parameters in the treatment of PCFD.

LEVEL OF EVIDENCE

Level III, case-control study.

Association of First Metatarsal Pronation Correction With Patient-Reported Outcomes and Recurrence Rates in Hallux Valgus

BACKGROUND

The purpose of this study was to determine if a postoperative decrease in first metatarsal pronation on 3-dimensional imaging was associated with changes in patient-reported outcomes as measured by the Patient-Reported Outcomes Measurement Information System (PROMIS) physical function, pain interference, and pain intensity domains or recurrence rates in patients with hallux valgus (HV) who undergo a first tarsometatarsal fusion (modified Lapidus procedure).

METHODS

Thirty-nine consecutive HV patients who met the inclusion criteria and underwent a modified Lapidus procedure had preoperative and ≥2-year postoperative PROMIS scores and had first metatarsal pronation measured on preoperative and at least 5-month postoperative weightbearing CT scans were included. Multivariable regression analyses were used to investigate differences in the change in PROMIS domains preoperatively and 2 years postoperatively between patients with "no change/increased first metatarsal pronation" and "decreased first metatarsal pronation." A log-binomial regression analysis was performed to identify if a decrease in first metatarsal pronation was associated with recurrence of the HV deformity.

RESULTS

The decreased first metatarsal pronation group had a significantly greater improvement in the PROMIS physical function scale by 7.2 points (P = .007) compared with the no change/increased first metatarsal pronation group. Recurrence rates were significantly lower in the decreased first metatarsal pronation group when compared to the no change/increased first metatarsal pronation group (risk ratio 0.25, P = .025).

CONCLUSION

Detailed review of this limited cohort of patients who underwent a modified Lapidus procedure suggests that the rotational component of the HV deformity may play an important role in outcomes and recurrence rates following the modified Lapidus procedure.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

High Reliability for Semiautomated 3D Measurements Based on Weightbearing CT Scans

BACKGROUND

A reliable assessment of the ankle using weightbearing radiography remains challenging. Semiautomated 3-dimensional (3D) measurements derived from weightbearing computed tomography (WBCT) scans may provide a more reliable approach.

METHODS

Thirty healthy individuals without any foot and ankle disorder were analyzed. We assessed 6 widely used ankle parameters (4 angles and 2 distances) using either semiautomated 3D (based on WBCT scans) or traditional 2-dimensional (2D; based on conventional radiographs) measurements. The reliability and discrepancy between both techniques were compared using intraclass correlation coefficients and the Bland-Altman method.

RESULTS

Five of 6 variables showed a lower reliability when derived from 2D measurements. The mean of 3 variables differed between the techniques: the 3D technique assessed that the talonavicular coverage angle was 18.9 degrees higher, the axial talocalcaneal angle was 5.5 degrees higher, and the talocalcaneal overlap was 3.7 mm lower when compared with 2D measurements.

CONCLUSION

Semiautomated 3D measurements derived from WBCT scans provide more reliable information on ankle alignment compared with 2D measurements based on weightbearing radiographs. Future studies may show to what extent these parameters could contribute to current diagnostic algorithms and treatment concepts.

LEVEL OF EVIDENCE

Not applicable.

Comparison of medial distal tibial angle in EOS imaging and weightbearing X-ray

BACKGROUND

The medial distal tibial angle (MDTA) is used for measurement of ankle alignment. Standard to measure MDTA is weightbearing mortise view. EOS imaging becomes more popular for limb alignment analysis using low-dose radiation. As MDTA might vary in EOS, comparison between both radiographic techniques has been performed.

METHODS

MDTA was compared between both techniques in 43 cases by defining the mechanical tibial axis in different ways (X-ray low, EOS low, EOS high). For each method MDTA, intra- and interobserver reliability has been compared.

RESULTS

The correlation between the different methods were measured by ICC (intraclass coefficient) and were ICC 0.86 (X-ray low/EOS low), ICC 0.85 (X-ray low/EOS high) and ICC 0.97 (EOS low/EOS high). Intra- and interobserver reliability were in each case ICC > 0.95.

CONCLUSION

ICC showed a substantial to excellent agreement between all methods. EOS is appropriate to determine MDTA and can be used for assessment of coronar deformities of the distal tibia.

Assessment of Hindfoot Alignment Comparing Weightbearing Radiography to Weightbearing Computed Tomography

BACKGROUND

Hindfoot alignment view (HAV) radiographs are widely utilized for 2-dimensional (2D) radiographic assessment of hindfoot alignment; however, the development of weightbearing computed tomography (WBCT) may provide more accurate methods of quantifying 3-dimensional (3D) hindfoot alignment. The aim of this study was to compare the 2D calcaneal moment arm measurements on HAV radiographs with WBCT.

METHODS

This retrospective cohort study included 375 consecutive patients with both HAV radiographs and WBCT imaging. Measurement of the 2D hindfoot alignment moment arm was compared between both imaging modalities. The potential confounding influence of valgus/varus/neutral alignment, presence of hardware, and motion artifact were further analyzed.

RESULTS

The intraclass correlation coefficients (ICCs) of interobserver and intraobserver reliability for measurements with both imaging modalities were excellent. Both modalities were highly correlated (Spearman coefficient, 0.930; P < .001). HAV radiographs exhibited a mean calcaneal moment arm difference of 3.9 mm in the varus direction compared with WBCT (95% CI, -4.9 to 12.8). The difference of hindfoot alignment between both modalities was comparable in subgroups with neutral/valgus/varus alignment, presence of hardware, and motion artifact.

CONCLUSION

Both HAV radiographs and WBCT are highly reliable and highly correlated imaging methods for assessing hindfoot alignment. Measurements were not influenced by severe malalignment, the presence of hardware, or motion artifact on WBCT. On average, HAV radiographs overestimated 3.9 mm of varus alignment as compared with WBCT.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Evaluation of a Weightbearing CT Artificial Intelligence-Based Automatic Measurement for the M1-M2 Intermetatarsal Angle in Hallux Valgus

BACKGROUND

Weightbearing cone beam computed tomography (WBCT) has been gaining traction as a useful imaging modality in the diagnosis and follow-up of foot and ankle musculoskeletal pathologies due to the ability to perform quick, low-dose, 3-dimensional (3D) scans. However, the resulting wealth of 3D data renders daily clinical use time-consuming. The aim of this study was to evaluate a new artificial intelligence (AI)-based automatic measurement for the M1-M2 intermetatarsal angle (IMA) in hallux valgus (HV). We hypothesized that automatic and manual measurements would have a strong correlation, and that the AI software would yield better reproducibility and would be faster compared with manual measurements.

METHODS

This was a multicenter retrospective comparative case-control study in which a total of 128 feet were included from 93 patients who underwent WBCT scans as part of their routine follow-up: 59 feet with symptomatic HV and 69 controls. The IMA was measured automatically using the AI software and manually on digitally reconstructed radiographs (DRRs). The AI software produced both an automatic 2D (auto 2D) and 3D (auto 3D) measurement.

RESULTS

There were strong intermethod correlations between the DRR IMA and the auto 2D (HV, r = 0.61; control, r = 0.60; all P < .0001) and auto 3D (HV, r = 0.63; control, r = 0.52; all P < .0001) measurements, respectively. The intrasoftware reproducibility was very close to 100%. Measurements took 23.6 ± 2.31 seconds and 14.5 ± 1.18 seconds, respectively, when taken manually on DRRs and automatically. Controls demonstrated a mean DRR IMA of 8.6 (95% CI, 8.1-9.1), mean auto 2D of 11.2 (95% CI, 10.7-11.7), and mean auto 3D IMA of 11.0 (95% CI, 10.5-11.5). The HV group demonstrated significantly increased IMA compared with controls (P < .0001), with a mean DRR IMA of 15.4 (95% CI, 14.8-16.1), mean auto 2D of 17.8 (95% CI, 17.2-18.4), and mean auto 3D IMA of 16.8 (95% CI, 16.8-17.4).

CONCLUSION

Measurements generated by the WBCT AI-based automatic measurement system for IMA demonstrated strong correlations with manual measurements, with near-perfect reproducibility. Further developments are warranted in order to make this tool more usable in daily practice, particularly with respect to its use in the presence of hardware in the foot.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Preoperative Guidance With Weight-Bearing Computed Tomography and Patient-Specific Instrumentation in Foot and Ankle Surgery

The use of preoperative and intraoperative guidance in foot and ankle surgery has grown substantially in recent years. Weight-bearing computed tomography (WBCT) and patient-specific instrumentation (PSI) are used in total ankle arthroplasty (TAA) to achieve precise bone cutting and implant positioning, and intraoperative 3-dimensional (3D) imaging has been used to reduce complications and improve clinical outcomes in other foot and ankle surgical procedures. This narrative review of the literature focuses on the evidence supporting the use of WBCT and PSI in TAA and looks at other promising technologies used to guide foot and ankle surgery.

Establishing a New Patient-Specific Implantation Technique for Total Ankle Replacement: An In Vitro Study

BACKGROUND

Revision rates after total ankle replacements (TARs) are higher compared with other total joint replacements. The present study aimed to establish a new patient-specific implantation (PSI) technique for TAR.

MATERIAL AND METHODS

A total of 10 complete Caucasian cadaver legs had whole leg computed tomography scans. The individual geometrical ankle joint axis was determined, and based on this axis, the position of the prosthesis was planned. We assessed prosthesis placement, guiding block position, and preoperative and postoperative ankle rotational axes.

RESULTS

The guiding block position interobserver reliability was 0.37 mm 0.45 (mean ± SD) for the tibial guiding block. The value for the first talar guiding block was 1.72 ± 1.3 mm and for the second talar guiding block, 0.61 ± 0.39 mm. The tibial slope as well as the frontal angles of the anatomical tibial axis compared to the tibial and talar articular surfaces showed no statistically relevant differences with numbers available. The deviation of the assessed preoperative joint axis to the postoperative joint axis was 14.6° ± 7.8.

CONCLUSION

The present study describes the results of an establishing process of a new PSI technique for TAR. The reliability of guiding block positioning and, thereby, prosthesis placement is sufficient.

LEVEL OF EVIDENCE

Biomechanical study.

Distance mapping of the foot and ankle joints using weightbearing CT: The cavovarus configuration

INTRODUCTION

The goal of this study was to characterize the abnormal joint surface interaction at the ankle, hindfoot and midfoot joints of the cavovarus foot using distance mapping on weightbearing computed tomography (WBCT) images by comparing a series of cavovarus feet to a series of normally-aligned feet.

METHODS

In this case-control study, ten feet (10 patients) with asymptomatic cavovarus shape (cases; N = 10) were compared to 10 matched-paired (by age, gender and body mass index) normally-aligned feet (10 patients) (controls; N = 10). Three-dimensional models were produced from the images and distance maps representing joint surface configuration were generated for the ankle, hindfoot and midfoot joints. The distance maps for each joint were then compared between the two groups and between regions in the same group.

RESULTS

In the cavovarus group there was a significant increase in surface-to-surface distance at the posterior tibiotalar joint and a reduced distance at the anterior part, together with a greater distance at the posterior half of the medial gutter. Also, a decrease in surface-to-surface distance on the anterior half of the anterior facet and an increased distance on the posterior quadrants of the posterior facet of the subtalar joint were found. At the sinus tarsi, the lateral aspect of the talonavicular joint, the naviculocuneiform and the tarsometatarsal joints there was a statistically significant increase in surface-to-surface distance in cavovarus patients as compared to controls.

CONCLUSION

Distance mapping analysis on WBCT images identified significant differences in surface-to-surface interaction at the foot and ankle joints between cavovarus and normally-aligned feet.

LEVEL OF EVIDENCE

Level III, case-control study.

WEIGHT-BEARING CONE BEAM CT SCANS AND ITS USES IN ANKLE, FOOT, AND KNEE: AN UPDATE ARTICLE

Imaging plays a key role in the preoperative diagnosis, surgical planning, and postsurgical assessment of the foot, ankle, and knee pathologies. Interpreting diagnostic imaging accurately is crucial for the clinical practice of orthopedic surgeons. Although among the most used imaging modalities, radiographic assessments are amenable to errors for various technical reasons and superposition of bones. Computed tomography (CT) is a conventional imaging procedure that provides high-resolution images, but fails in considering a truly weight-bearing (WB) condition. In an attempt to overcome this limitation, WB cone beam CT technology has being successfully employed in the clinical practice for the past decade. Besides economically viable and safe, the WB cone beam CT considers WB conditions and provides high-quality scans, thus allowing an equitable and correct interpretation. This review aims to address extensive description and discussion on WBCT, including imaging quality; costs; time consumption; and its applicability in common foot, ankle, and knee, conditions. With this technology increasing popularity, and considering the extensive literature on medical research, radiologists and orthopedic surgeons need to understand its potential applications and use it optimally. Level of Evidence III, Systematic review of level III studies.

Weight-bearing CT in foot and ankle pathology

Cone-beam scanners (CBCT) enable CT to be performed under weight-bearing - notably for the foot and ankle. The technology is not new: it has been used since 1996 in dental surgery, where it has come to replace panoramic X-ray. What is new is placing the scanner on the ground, so as to have 3D weight-bearing images, initially of the foot and ankle, and later for the knee and pelvis. This saves time, radiation and money. It is now increasingly used, but is unfortunately limited by not having specific national health insurance cover in France, and by the psychological reticence that goes with any technological breakthrough. A review of the topic is indispensable, as it is essential to become properly acquainted with this technique. To this end, we shall be addressing 5 questions. What biases does conventional radiography incur? Projecting a volume onto a plane incurs deformation, precluding true measurement. Conventional CT is therefore often associated with an increased dose of radiation. What is the impact of CBCT on radiation dose, costs and the care pathway? The conical beam turns around the limb (under weight-bearing if so desired) in less than a minute, making the radiation dose no greater than in standard X-ray. What does the literature have to say about CBCT, and what are the indications? CBCT is indicated in all foot and ankle pathologies, and indications now extend to the upper limb and the knee, and will soon include the pelvis. How are angles measured on this 3D technique? The recently developed concept of 3D biometry uses dedicated software to identify anatomic landmarks and automatically segment the bones, thereby enabling every kind of measurement. What further developments are to be expected? CBCT may become indispensable to lower-limb surgical planning. Artificial Intelligence will reveal novel diagnostic, prognostic and therapeutic solutions. LEVEL OF EVIDENCE: V; expert opinion.

3D Assessment in Posttraumatic Ankle Osteoarthritis

BACKGROUND

Auto-generated 3-dimensional (3D) measurements based on weightbearing cone-beam computed tomography (CT) scan technology may allow for a more accurate hind- and midfoot assessment. The current study evaluated the reliability and clinical relevance of such measurements in patients with posttraumatic end-stage ankle osteoarthritis.

METHODS

Seventy-two patients treated at our institution for posttraumatic end-stage ankle osteoarthritis, with available weightbearing conventional radiographs and a cone-beam CT scan, were analyzed. Twenty healthy individuals aged between 40 and 70 years served as controls. Seven variables were measured on weightbearing conventional radiographs (2D) and compared to 3D measurements that were based on reconstructions from weightbearing cone-beam CT scans. The reliability of each measurement was calculated and subgroups formed according to commonly observed deformities.

RESULTS

Inter- and intraobserver reliability was superior for 3D compared to 2D measurements. The accuracy of 3D measurements performed on osteoarthritic ankles was similar to 3D measurements performed on healthy individuals. Thirty-three of the 72 included patients (46%) evidenced an inframalleolar compensation of a supramalleolar/intra-articular ankle deformity (78% = varus compensation; 22% = valgus compensation), whereas 24 of those 72 patients (33%) showed no compensation or a further increase of a supramalleolar/intra-articular ankle deformity (67% = varus deformity; 33% = valgus deformity).

CONCLUSION

Auto-generated 3D measurements of the hind- and midfoot were found to be reliable in both healthy individuals and patients with posttraumatic end-stage ankle osteoarthritis. Such measurements may be crucial for a detailed understanding of the location and extent of hindfoot deformities, possibly impacting decision making in the treatment of end-stage ankle osteoarthritis.

LEVEL OF EVIDENCE

Level III, comparative study.

Pes cavovarus in Charcot-Marie-Tooth compared to the idiopathic cavovarus foot: A preliminary weightbearing CT analysis

BACKGROUND

Pes cavovarus is a foot deformity that can be idiopathic (I-PC) or acquired secondary to other pathology. Charcot-Marie-Tooth disease (CMT) is the most common adult cause for acquired pes cavovarus deformity (CMT-PC). The foot morphology of these distinct patient groups has not been previously investigated. The aim of this study was to assess if morphological differences exist between CMT-PC, I-PC and normal feet (controls) using weightbearing computed tomography (WBCT).

METHODS

A retrospective analysis of WBCT scans performed between May 2013 and June 2017 was undertaken. WBCT scans from 17 CMT-PC, 17 I-PC and 17 healthy normally-aligned control feet (age-, side-, sex- and body mass index-matched) identified from a prospectively collected database, were analysed. Eight 2-dimensional (2D) and three 3-dimensional (3D) measurements were undertaken for each foot and mean values in the three groups were compared using one-way ANOVA with the Bonferroni correction.

RESULTS

Significant differences were observed between CMT-PC or I-PC and controls (p<0.05). Two-dimensional measurements were similar in CMT-PC and I-PC, except for forefoot arch angle (p=0.04). 3D measurements (foot and ankle offset, calcaneal offset and hindfoot alignment angle) demonstrated that CMT-PC exhibited more severe hindfoot varus malalignment than I-PC (p=0.03, 0.04 and 0.02 respectively).

CONCLUSIONS

CMT-related cavovarus and idiopathic cavovarus feet are morphologically different from healthy feet, and CMT feet exhibit increased forefoot supination and hindfoot malalignment compared to idiopathic forms. The use of novel three-dimensional analysis may help highlight subtle structural differences in patients with similar foot morphology but aetiologically different pathology.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Weight-bearing cone-beam computed tomography in the foot and ankle specialty: where we are and where we are going - an update

Cone-beam computed tomography (CBCT) has been applied in dentistry and medicine for nearly two decades. Its application in the foot and ankle specialty has grown exponentially in recent years. Weight-bearing CBCT allows clinicians to obtain weight-bearing images that can be viewed in all three planes and to construct three-dimensional models, similar to those constructed from traditional CT scans, as well as exposing patients to less radiation than do traditional CT scans. This technology has revolutionized diagnoses, improving the understanding of various lesions and surgical planning in the foot and ankle specialty. Ongoing studies of the use of weight-bearing CBCT in foot and ankle surgery are focused on fully automated and semi-automated three-dimensional measurements, as well as bone segmentation, mapping of the distances/orientation of the joints, and the production of customized implants. The aims of this review article are to show the evolution of this emerging tool in the foot and ankle specialty, to update those in related specialties on its use in current clinical practice, and to indicate where the research community is heading.

Weightbearing Computed Tomography for Assessment of Foot and Ankle Deformities: The Iowa Experience

BACKGROUND

Weightbearing computed tomography (WBCT) is a reliable and precise modality for the measurement and analysis of bone position in the foot and ankle, as well as associated deformities. WBCT to assess three dimensional relationships among bones allowed the development of new measurements, as the Foot and Ankle Offset (FAO), which has high inter and intra-rater reliability. This study reports the University of Iowa's experience utilizing WBCT for the care of foot and ankle patients by describing its utility across different orthopedic diseases in improving diagnostic assessment, aiding surgical planning, and expanding the use for objective clinical follow-up.

METHODS

The medical records of consecutive patients with various foot and ankle disorders that underwent WBCT examination as part of the standard of care at a single institution between November 2014 and August 2020 were retrospectively reviewed. Patient factors, including body mass index (BMI), sex, and patient comorbidities were collected. 3D coordinates for calculation of FAO were harvested using the Multiplanar Reconstruction (MPR) views were calculated from the obtained exams. Descriptive statistics were performed with Shapiro-Wilk test and the Anderson-Darling tests.

RESULTS

1175 feet and ankles (820 patients) had a WBCT performed over the studied 68 months. 53% of the subjects were male and 47% female. 588 of the acquisitions were from the right side (50.04%) and 587 from the left side (49.96%). Diabetes was present in 15.47% of, Rheumatic diagnoses in 4.52% and smoking habits in 44.10% of patients. Mean BMI of the sample was found to be 32.47 (32.03-32.90, 95% CI). The mean Foot and Ankle Offset (FAO) encountered in the study's population was 2.43 (2.05-2.82, 95% CI; min -30.8, max 37.65; median 2.39).

CONCLUSION

This study contains the largest cohort of WBCTs with accompanied FAO measurements to date, which can aid with establishing a new baseline FAO measurement for multiple pathological conditions. Acquiring WBCTs resulted in a variety of more specific diagnoses for patient with foot and ankle complaints. The ability to utilize WBCT for presurgical planning, the capability to provide a 3D reconstruction of patient anatomy, and its use for assessment of advanced relational foot and ankle measurements, such as FAO, demonstrate how WBCT may serve as a remarkable utility in clinical practice and has become a standard of care in our practice at the University of Iowa.Level of Evidence: IV.

Relevance of SPECT-CT in Complex Cases of Foot and Ankle Surgery: A Comparison With MRI

BACKGROUND

Finding the right diagnoses in patients with complex foot and ankle disorders can be challenging. Single-photon emission computed tomography and computed tomography (SPECT-CT) has shown to be feasible in foot and ankle surgery. The aim of this study was to evaluate the reliability and accuracy of SPECT-CT and thereby its impact on final treatment decision compared with magnetic resonance imaging (MRI).

METHODS

A retrospective study was performed on 49 patients treated at our institution. Experienced foot and ankle surgeons independently, and blinded, analyzed clinical data and radiographs together with MRI, SPECT-CT, or a combination of both. Based on the determined final treatment decision Cohen's kappa values were calculated to illustrate interrater and intrarater reliability.

RESULTS

The kappa values for interrater reliability were higher for SPECT-CT at .68 and MRI + SPECT-CT at .71 compared to 0.38 for MRI alone (P < .05). The kappa values for intrarater reliability of MRI + SPECT-CT were higher at .75 compared with SPECT-CT alone at .67 (P < .05) and MRI at .35 (P < .01).

CONCLUSION

We found a higher interrater and intrarater reliability for SPECT-CT compared with MRI alone for diagnosing complex foot and ankle pathologies. SPECT-CT has a high impact on final treatment decision. The main indications are bony pathologies with diagnostic uncertainty especially in closely adjacent structures as the joints of the midfoot, occult coalitio, stress fractures, verification or exclusion of nonfusion, periprosthetic disorders after total ankle replacement and osteochondral lesion in cases of combined pathologies.Levels of Evidence: Level IV: Retrospective study.

Consensus for the Use of Weightbearing CT in the Assessment of Progressive Collapsing Foot Deformity

RECOMMENDATION

There is evidence that the use of WEIGHTBEARING imaging aids in the assessment of progressive collapsing foot deformity (PCFD). The following WEIGHTBEARING conventional radiographs (CRs) are necessary in the assessment of PCFD patients: anteroposterior (AP) foot, AP or mortise ankle, and lateral foot. If available, a hindfoot alignment view is strongly recommended. If available, WEIGHTBEARING computed tomography (CT) is strongly recommended for surgical planning. When WEIGHTBEARING CT is obtained, important findings to be assessed are sinus tarsi impingement, subfibular impingement, increased valgus inclination of the posterior facet of the subtalar joint, and subluxation of the subtalar joint at the posterior and/or middle facet.

LEVEL OF EVIDENCE

Level V, consensus, expert opinion.

Comparison of External Torque to Axial Loading in Detecting 3-Dimensional Displacement of Syndesmotic Ankle Injuries

BACKGROUND

Current imaging techniques try to quantify 3-dimensional displacement of syndesmotic ankle injuries using 2-dimensional measurements, which may obscure an exact diagnosis. Therefore, our aim was to determine 3-dimensional displacement of syndesmotic ankle injuries under load and torque using a weightbearing computed tomography (WBCT) and to assess the relation with previously established 2-dimensional measurements.

METHODS

Seven paired cadaver specimens were mounted into a radiolucent frame. WBCT scans were obtained to generate 3-dimensional models after different patterns of axial load (0 kg, 85 kg) combined with external torque (0, 10 Nm). Sequential imaging was repeated in ankles containing intact syndesmotic ligaments, sectioning of the anterior inferior tibiofibular ligament (AITFL; condition 1A), deltoid ligament (DL; condition 1B), combined AITFL+DL (condition 2), and AITFl+DL+interosseous membrane (condition 3). Reference anatomical landmarks were established relative to the intact position of the fibula to quantify displacement. A subsequent correlation analysis was performed between the obtained 2- and 3-dimensional measurements.

RESULTS

Axial load increased lateral translation (mean = -0.9 mm, 95% confidence interval [CI]: 1.3, -0.1) significantly in condition 2 relative to the intact ankle (P < .05) but did not demonstrate other significant displacements. External torque increased displacement significantly in all directions (P < .05), except for dorsal translation of the fibula (P > .05). The highest displacement could be detected when external torque was applied in condition 3 and consisted of posterior translation (mean = -3.1 mm; 95% CI: -4.8, -2.7) and external rotation (mean = -4.7 degrees; 95% CI: -5.6, -2.9). Pearson correlation coefficients between the 2-dimensional and 3-dimensional measurements were moderate and ranged from 0.31 to 0.56 (P < .05).

CONCLUSION

External torque demonstrated superiority over axial load in detecting syndesmotic ankle instability. Axial load increased lateral translation; however, differences were submillimeter in magnitude until torque was applied. A moderate correlation was found with previously established 2-dimensional measurements.

CLINICAL RELEVANCE

In clinical practice these findings substantiate application of external torque in current imaging modalities to improve detection of syndesmotic ankle injuries.

Three-Dimensional Biometric Weightbearing CT Evaluation of the Operative Treatment of Adult-Acquired Flatfoot Deformity

BACKGROUND

Assessment of operative correction of adult-acquired flatfoot deformity (AAFD) has been traditionally performed by clinical evaluation and conventional radiographic imaging. Previously, a 3-dimensional biometric weightbearing computed tomography (WBCT) tool, the foot ankle offset (FAO), has been developed and validated in assessing hindfoot alignment. The purpose of this study was to investigate the role of FAO in evaluating operative deformity correction in AAFD.

METHODS

In this prospective comparative study, 19 adult patients (20 feet) with stage II (flexible) flatfoot deformity underwent preoperative and postoperative standing WBCT examination at mean 19 months (range, 6-24) after surgery. Three-dimensional coordinates of the foot tripod and center of the ankle joint were acquired by 2 independent and blinded observers. These coordinates were used to calculate the FAO using dedicated software, and subsequently compared pre- and postoperatively. The FAO is a previously validated biometric measurement that represents centering of the foot tripod as well as hindfoot alignment, with a normal mean FAO of 2.3% ± 2.9%. In addition, Patient Reported Outcomes Measurement Information System (PROMIS) clinical outcomes scores were compared pre- and postoperatively with a mean follow-up of 22.6 months (range, 14-37).

RESULTS

There was significant correction of flatfoot deformity from a mean preoperative FAO of 9.8% to a mean postoperative value of 1.3% (P < .001). Additionally, there was statistically significant improvement in all PROMIS domains (P < .05), except depression, at an average follow-up of 22.6 months. Spring ligament reconstruction was the only procedure associated with a significant correction in FAO (P = .0064).

CONCLUSION

The FAO was a reliable and sensitive tool that was used to evaluate preoperative deformity as well as postoperative correction, with patients demonstrating both significant improvement in FAO as well as patient-reported outcomes. These findings demonstrate the role for biometric 3-dimensional WBCT imaging in assessing operative correction after flatfoot reconstruction, as well as the potential role for operative planning to address preoperative deformity.

LEVEL OF EVIDENCE

Level II, prospective comparative study.

Multiplanar Semiautomatic Assessment of Foot and Ankle Offset in Adult Acquired Flatfoot Deformity

BACKGROUND

Semiautomatic 3-dimensional (3D) biometric weightbearing computed tomography (WBCT) tools have been shown to adequately demonstrate the relationship between the center of the ankle joint and the tripod of the foot. The measurement of the foot and ankle offset (FAO) represents an optimized biomechanical assessment of foot alignment. The objective of this study was to evaluate the correlation between FAO and traditional adult acquired flatfoot deformity (AAFD) markers, measured in different planes. We hypothesized that the FAO would significantly correlate with other radiographic markers of pronounced AAFD.

METHODS

In this retrospective comparative study, we included 113 patients with stage II AAFD, 43 men and 70 women, mean age of 53.5 (range, 20-86) years. 3D coordinates (x, y, and z planes) of the foot tripod (most plantar voxel of the first and fifth metatarsal heads, and calcaneal tuberosity) and the center of the ankle joint (most proximal and central voxel of the talar dome) were assessed by 2 blinded and independent fellowship-trained orthopedic foot and ankle surgeons. The FAO was automatically calculated using the 3D coordinates by dedicated software. Multiple WBCT parameters related to the severity of the deformity in the coronal, sagittal, and transverse planes were manually measured.

RESULTS

We found overall good to excellent intra- (range, 0.75-0.99) and interobserver (range, 0.73-0.99) reliability for manual AAFD measurements. FAO semiautomatic measurements demonstrated excellent intra- (0.99) and interobserver (0.99) reliabilities. Hindfoot moment arm (HMA) (P < .00001), subtalar horizontal angle (P < .00001), talonavicular coverage angle (P = .00004), and forefoot arch angle (P = .0001) were the only variables found to significantly influence and correlate with FAO measurements, with an R² value of 0.79. An HMA value of 19.8 mm was found to be a strong threshold predictor of increased values of FAO, with mean values of FAO of 6.5 when the HMA was lower than 19.8 mm and 14.6 when the HMA was equal to or higher than 19.8 mm.

CONCLUSION

We found that 3D WBCT semiautomatic measurements of FAO significantly correlated with some traditional markers of pronounced AAFD. Measurements of FAO were also found to be slightly more reliable than the manual measurements. The FAO offers a simple and more complete biomechanical and multiplanar assessment of the AAFD, representing in a single measurement the 3D components of the deformity.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Intraobserver and interobserver reliability of cone beam weightbearing semi-automatic three-dimensional measurements in symptomatic pes cavovarus

INTRODUCTION

Pes cavovarus is a three-dimensional (3D) foot deformity. New 3D semi-automatic measurements utilising weightbearing computerised topography (WBCT) images have recently been proposed to assess hindfoot alignment, but reliability in pes cavovarus has never been investigated. The aim of this study was to assess intraobserver and interobserver reliability of the foot ankle offset (FAO), calcaneal offset (CO) and hindfoot alignment angle (HAA) in pes cavovarus.

METHODS

Anonymised WBCT datasets from 51 feet (17 Charcot-Marie-Tooth related cavovarus, 17 idiopathic cavovarus and 17 controls) were retrospectively reviewed. Three observers (two senior foot and ankle fellows and one orthopaedic resident) independently measured FAO, CO and HAA using dedicated software, with measurements repeated two weeks apart. Subgroup analysis was performed to assess whether aetiology or severity of varus deformity and level of seniority affected reliability.

RESULTS

Mean values for intra and interobserver reliability for FAO (r=0.98; ICC: 0.99), CO (r=0.97; ICC: 0.98) and HAA measurements (r=0.97; ICC: 0.98) were excellent. Subgroup analyses showed that FAO, CO and HAA's intra (r/ρ range, 0.77-0.95) and interobserver (ICC range, 0.88-0.98) reliability remained excellent in patients with Charcot-Marie-Tooth related cavovarus, idiopathic pes cavovarus and normal feet, regardless of the severity of deformity. No difference was found in FAO, CO and HAA mean values from three observers (p>0.05 in all cases).

DISCUSSION

This study demonstrates that 3D semi-automatic measurements of WBCT images have excellent intra and interobserver reliability in the assessment of hindfoot alignment in pes cavovarus. Aetiology and severity of deformity, and level of seniority do not affect reliability of these measurements.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Influence of foot position on the measurement of first metatarsal axial rotation using the first metatarsal axial radiographs

BACKGROUND

The purpose of this study was to clarify 1) the measurement error of the pronation angle using the first metatarsal axial radiograph with the pronation angle along the longitudinal axis of the first metatarsal as the reference standard, 2) the influence of variability in the foot position on the measurement error, and 3) the intra- and interrater reliability of pronation angle measurement using digitally reconstructed radiographs.

METHODS

Digitally reconstructed radiographs of the first metatarsal were generated from the computed tomography images of 10 feet without hallux valgus (non-HV group) and 10 feet with hallux valgus (HV group). In total, 135 images were created at different degrees of supination, plantarflexion, and adduction from each foot to simulate the first metatarsal axial view. Then, the pronation angle of the first metatarsal was measured. The measurement error was determined using the mean error and 95% limits of agreement. Simple linear regression analysis was used to test the correlations of the measurement error with pronation, plantarflexion and adduction angles. The intra- and interrater reliability of measurement was assessed using the intraclass correlation coefficient and minimum detectable change values.

RESULTS

The mean measurement errors were 0.1° for both the non-HV and HV groups. There was no significant correlation of the measurement error with pronation, plantarflexion or adduction angles for both groups. Additionally, the intraclass correlation coefficients for the intra- and interrater reliability were more than 0.9 in both the non-HV and HV groups with the minimum detectable change values ranging from 0.7° to 1.4°.

CONCLUSION

The measurement error of first metatarsal pronation using the axial view was clinically acceptable. The measurements were not influenced by the variability in foot position while obtaining the radiograph. The first metatarsal axial view could be used to quantify the first metatarsal coronal rotation.

The horizontal calcaneofibular ligament: a sign of hindfoot valgus on ankle MRI

OBJECTIVE

Hindfoot valgus malalignment has been assessed on coronal MRI by the measurement of the tibio-calcaneal (TC) angle and apparent moment arm (AMA). This study aimed to determine if the calcaneofibular ligament (CFL) angle could be used as a further marker of hindfoot valgus malalignment on routine non-weight-bearing ankle MRI.

MATERIAL AND METHODS

One hundred ninety-five consecutive 3-T ankle MRI studies were identified from the hospital PACS system. The TC and CFL angles could be measured in 155 cases (78%), and the AMA on 153 cases.

RESULTS

The study group comprised 56 males and 72 females with a mean age of 46 years (range 4-89 years). In 27 patients, both ankles had been imaged. The Pearson correlation between the TC and CFL angles was -0.43, with a corresponding p value of 0.001 indicating a strong negative correlation between the TC and CFL angles. The CFL angle was significantly lower in those with hindfoot valgus (113 ± 14) compared with those without (123° ± 15°) (p = 0.001). The optimal cut-off point of the CFL angle for hindfoot valgus was ≤119°, with a sensitivity and specificity of 66% and 63% respectively. The Pearson correlation between the CFL angle and AMA was -0.10, with a corresponding p value of 0.21 indicating a weak negative correlation that did not reach statistical significance.

CONCLUSION

Hindfoot valgus as estimated by the increased TC angle on coronal non-weight-bearing ankle MRI is associated with a reduced CFL angle on sagittal MR images, but is not associated with AMA. Therefore, a horizontal orientation of the CFL on sagittal MR images may be a further useful sign of hindfoot valgus.

Radiographic Sagittal Tibio-Talar Offset in Ankle Arthrodesis-Accuracy and Reliability of Measurements

Radiographic outcome assessment of ankle arthrodesis (AA) requires accurate measurement techniques. This study aimed to identify the most reliable methods for sagittal tibio-talar alignment measurements with regard to the tibio-talar offset after AA. Lateral weight-bearing radiographs of 38 fused ankles were selected for retrospective review. The sagittal tibio-talar angle (STTA), the modified tibio-talar ratio (mT-T ratio) and the sagittal tibio-talar offset (tibCOR, procLAT) were measured by three independent observers. Intra- and interobserver correlation coefficients (ICC) and mean measurement differences were calculated to assess measurement reliability and accuracy. By defining the talar longitudinal axis as a line from the inferior aspect of the posterior tubercle of the talus to the most inferior aspect of the talar neck, STTA showed excellent (ICC 0.924; CI 95% 0.862–0.959) and mTT-ratio provided high (ICC 0.836; CI 95% 0.721–0.909) interobserver reliability, respectively. For tibio-talar offset measurement the tibCOR method showed superior reliability and better interobserver agreement compared to the procLAT technique. The STTA and a modified T-T ratio are recommended for future scientific radiographic measurements in AA.

Is load application necessary when using computed tomography scans to diagnose syndesmotic injuries? A cadaver study

BACKGROUND

Injuries to the distal tibio-fibular ligaments are common. While pronounced injuries can be reliably diagnosed using conventional radiographs, assessment of subtle syndesmotic injuries is challenging. This cadaver study determines the impact of loading on the assessment of incomplete and more complete syndesmotic injuries when using weightbearing computed tomography (CT) scans.

METHODS

Fourteen paired male cadavers (tibial plateau to toe-tip) were included. A radiolucent frame held specimens in a plantigrade position while both non-weightbearing and weightbearing computed tomography (CT) scans were taken. The following conditions were tested: First, intact ankles (Native) were scanned. Second, one specimen from each pair underwent anterior inferior tibio-fibular ligament (AITFL) transection (Condition 1A), while the contralateral underwent deltoid transection (Condition 1B). Third, the remaining intact deltoid or AITFL was transected from each specimen (Condition 2). Finally, the distal tibiofibular interosseous membrane (IOM) was transected in all ankles (Condition 3). Eight different measurements were performed to assess the integrity of the distal tibio-fibular syndesmosis on axial CT scans.

RESULTS

Load application had no impact on most measurements. While incomplete syndesmotic injuries could not be identified, cadavers with more complete injuries differentiated from native ankles when assessed using axial CT images. No significant difference was evident between discrete AITFL or deltoid ligament transection.

CONCLUSIONS

In a cadaver model, load application had no effect on the assessment of the distal tibio-fibular syndesmosis in incomplete and more complete syndesmotic injuries. Only more complete injuries of the distal tibio-fibular syndesmosis could be identified using axial CT images.

3D, Weightbearing Topographical Study of Periprosthetic Cysts and Alignment in Total Ankle Replacement

BACKGROUND

We investigated the association between hindfoot residual malalignment assessed on weightbearing computed tomography (WBCT) images and the development of periprosthetic cysts (PPCs) after total ankle replacement (TAR). We hypothesized that PPCs would be found predominantly medially in the varus configuration and laterally in the valgus configuration.

METHODS

Cases of primary TAR with available WBCT imaging of the ankle were included in this retrospective study. The location of the PPC was marked and the following volumes were calculated: total (TCV), medial (MCV), central (CCV), and lateral (LCV) cyst volumes. Hindfoot alignment was measured as Foot and Ankle Offset (FAO), with 95% confidence intervals (95% CIs) calculated to define varus (<95% CI) and valgus (>95% CI) groups. Cyst volumes were compared between these 2 groups. The American Orthopaedic Foot & Ankle Society (AOFAS) score at the time of the WBCT was also retrieved. Receiver operating characteristic (ROC) curves were used to determine FAO thresholds for predicting an increased risk of PPC.

RESULTS

Forty-eight TARs (mean follow-up, 44.6 months) were included, 81% of which had at least 1 PPC. The mean FAO was 0.12% (95% CI, -1.12 to 1.36). Patients with greater residual malalignment (P < .001) and those with longer follow-up (P < .001) presented with increased TCV. In varus cases, the MCV was greater than the LCV (P = .042), with a threshold FAO value of -2.75% or less predicting an increased MCV. In valgus cases, the LCV was greater than the MCV (P = .049), with a FAO threshold value of 4.5% or more predicting an increased LCV.

CONCLUSION

In this series, the PPC volume after primary TAR significantly correlated with postoperative hindfoot malalignment and longer follow-up.

LEVEL OF EVIDENCE

Level III, retrospective comparative series.

Is Lower-limb Alignment Associated with Hindfoot Deformity in the Coronal Plane? A Weightbearing CT Analysis

BACKGROUND

The goals of lower limb reconstruction are to restore alignment, to improve function, and to reduce pain. However, it remains unclear whether alignment of the lower limb and hindfoot are associated because an accurate assessment of hindfoot deformities has been limited by superposition on plain radiography. Consequently, surgeons often overlook hindfoot deformity when planning orthopaedic procedures of the lower limb. Therefore, we used weight-bearing CT to quantify hindfoot deformity related to lower limb alignment in the coronal plane.

QUESTIONS/PURPOSES

(1) Is lower-limb alignment different in varus than in valgus hindfoot deformities for patients with and without tibiotalar joint osteoarthritis? (2) Does a hindfoot deformity correlate with lower-limb alignment in patients with and without tibiotalar joint osteoarthritis? (3) Is joint line orientation different in varus than in valgus hindfoot deformities for patients with tibiotalar joint osteoarthritis? (4) Does a hindfoot deformity correlate with joint line orientation in patients with tibiotalar joint osteoarthritis?

METHODS

Between January 2015 and December 2017, one foot and ankle surgeon obtained weightbearing CT scans as second-line imaging for 184 patients with ankle and hindfoot disorders. In 69% (127 of 184 patients) of this cohort, a combined weightbearing CT and full-leg radiograph was performed when symptomatic hindfoot deformities were present. Of those, 85% (109 of 127 patients) with a median (range) age of 53 years (23 to 75) were confirmed eligible based on the inclusion and exclusion criteria of this retrospective comparative study. The Takakura classification was used to divide the cohort into patients with (n = 74) and without (n = 35) osteoarthritis of the tibiotalar joint. Lower-limb measurements, obtained from the full-leg radiographs, consisted of the mechanical tibiofemoral angle, mechanical tibia angle, and proximal tibial joint line angle. Weightbearing CT images were used to determine the hindfoot's alignment (mechanical hindfoot angle), the tibiotalar joint alignment (distal tibial joint line angle and talar tilt angle) and the subtalar joint alignment (subtalar vertical angle). These values were statistically assessed with an ANOVA and a pairwise comparison was subsequently performed with Tukey's adjustment. A linear regression analysis was performed using the Pearson correlation coefficient (r). A reliability analysis was performed using the intraclass correlation coefficient.

RESULTS

Lower limb alignment differed among patients with hindfoot deformity and among patients with or without tibiotalar joint osteoarthritis. In patients with tibiotalar joint osteoarthritis, we found knee valgus in presence of hindfoot varus deformity and knee varus in presence of hindfoot valgus deformity (mechanical tibiofemoral angle 0.3 ± 2.6° versus -1.8 ± 2.1°; p < 0.001; mechanical tibia angle -1.4 ± 2.2° versus -4.3 ± 1.9°; p < 0.001). Patients without tibiotalar joint osteoarthritis demonstrated knee varus in the presence of hindfoot varus deformity compared with knee valgus in presence of hindfoot valgus deformity (mechanical tibiofemoral angle -2.2 ± 2.2° versus 0.9 ± 2.4°; p < 0.001; mechanical tibia angle -1.8 ± 2.1° versus -4.3 ± 1.9°; p < 0.001). Patients with more valgus deformity in the hindfoot tended to have more tibiofemoral varus (r = -0.38) and tibial varus (r = -0.53), when tibiotalar joint osteoarthritis was present (p < 0.001). Conversely, patients with more valgus deformity in the hindfoot tended to have more tibiofemoral valgus (r = 0.4) and tibial valgus (r = 0.46), when tibiotalar joint osteoarthritis was absent (p < 0.001). The proximal joint line of the tibia had greater varus orientation in patients with a hindfoot valgus deformity compared with greater valgus orientation in patients with a hindfoot varus deformity (proximal tibial joint line angle 88.5 ± 2.0° versus 90.6 ± 2.2°; p < 0.05). Patients with more valgus deformity in the hindfoot tended to have more varus angulation of the proximal tibial joint line angle (r = 0.31; p < 0.05).

CONCLUSIONS

In patients with osteoarthritis of the tibiotalar joint, varus angulation of the knee was associated with hindfoot valgus deformity and valgus angulation of the knee was associated with hindfoot varus deformity. Patients without tibiotalar joint osteoarthritis exhibited the same deviation at the level of the knee and hindfoot. These distinct radiographic findings were most pronounced in the alignment of the tibia relative to the hindfoot deformity. This suggests a detailed examination of hindfoot alignment before knee deformity correction at the level of the proximal tibia, to avoid postoperative increase of pre-existing hindfoot deformity. Other differences detected between the radiographic parameters were less pronounced and varied within the subgroups. Future research could identify prospectively which of these parameters contain clinical relevance by progressing osteoarthritis or deformity and how they can be altered by corrective treatment.

LEVEL OF EVIDENCE

Level III, prognostic study.

Can Weightbearing Computed Tomography Scans Be Used to Diagnose Subtalar Joint Instability? A Cadaver Study

Chronic hindfoot instability is a frequent problem that includes the ankle and/or the subtalar joint. While ankle joint instability can be diagnosed clinically, accurate assessment of the subtalar joint remains elusive. This study's purpose was to assess the ability of weightbearing computed tomography (CT) scans to detect subtalar joint instability. Seven pairs of fresh frozen male cadavers (tibial plateau to toe-tip) were tested. A radiolucent frame held specimens in a plantigrade position while non-weightbearing and weightbearing CT scans (with and without torque application) were taken. First, intact ankles (Native) were scanned. Second, one specimen from each pair underwent interosseous talo-calcaneal ligament (ITCL) transection, while the contralateral underwent calcaneo-fibular ligament (CFL) transection. Third, the remaining intact ITCL or CFL was transected. Finally, the deltoid ligament was transected in all ankles. Eight radiographic measurements were performed to assess the congruency of the subtalar joint on digitally reconstructed radiographs and single CT images. Axial loading did not impact most measurements, whereas torque did impact most measurements. Radiographic measurements performed at the subtalar joint level were more reliable and better predictors for subtalar joint instability compared with measurements performed at the ankle joint level. While torque application is crucial to identify subtalar joint instability, axial load application should be avoided. Measurements to assess the subtalar joint stability should primarily be performed at the subtalar joint level rather than at the ankle joint level when using weightbearing CT scans. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2457-2465, 2019.

Influence of the ankle position and X-ray beam angulation on the projection of the posterior facet of the subtalar joint

OBJECTIVE

Using digitally reconstructed radiographs (DRRs), we determined how changes in the projection angle influenced the assessment of the subtalar joint.

MATERIALS AND METHODS

Weightbearing computed tomography (CT) scans were acquired in 27 healthy individuals. CT scans were segmented and processed to create DRRs of the hindfoot. DRRs were obtained to represent 25 different perspectives to simulate internal rotation of the ankle with and without caudal angulation of the X-ray beam. Subtalar joint morphology was quantified by determining the joint space curvature, subtalar inclination angle (SIA), calcaneal slope (CS), and projection of the subtalar joint line on three-dimensional (3-D) reconstructions of the calcaneus.

RESULTS

The curvature of the projected joint space was altered substantially over the different DRR projections. Simulated caudal angulation of the X-ray beam with respect to the ankle decreased the SIA and CS significantly. Internal rotation also had a significant impact on the SIA and CS if the X-ray beam was in neutral or in 10° of caudal angulation. An antero-posterior (AP) view of the ankle showed the posterior area of the posterior facet, whereas a more anterior area was visible with internal rotation of the foot and caudal angulation of the X-ray beam.

CONCLUSION

Internal rotation of the foot of 20° is recommended to assess the posterior aspect of the posterior facet, whereas a combined 20° internal rotation of the foot and 40° caudal angulation of the X-ray beam is best to assess the anterior aspect of the posterior facet of the subtalar joint.

Ankle morphometry based on computerized tomography

BACKGROUND

Thorough understanding of the morphometry of the ankle joint is crucial to optimize conservative and operative therapy of ankle joint disorders. Despite recent improvements, basic anatomic and biomechanical correlations of the ankle joint including the orientation of the ankle joint axis and joint morphology as its key biomechanical features are not sufficiently recorded to date. The aim of this study was the evaluation of the ankle morphometry to gain information about the ankle joint axis.

MATERIAL AND METHODS

In this study 98 high-resolution CT-scans of complete Caucasian cadaver legs were analysed. Using the software Mimics and 3-Matic (Materialize) 22 anatomic parameters of the talocrural joint were assessed, including the length, width and surface area of the tibial and talar articular areas. Additionally, the radii of the articular areas, the medial distal tibial angle and the height of the talar dome were determined.

RESULTS

The radius of the central trochlea tali was 44.6±4.1mm (mean±SD). The central trochlea tali arc length was 40.8±3.0mm and its width was 27.4±2.5mm. Additionally we determined 47.0±4.4mm for the tibial sagittal radius, 27.6±3.0mm for the tibial arc length and 27.4±2.5mm for the central tibial width.

CONCLUSION

The present study describes the three-dimensional morphometry of Caucasian ankle joints in detail. This dimensional analysis of the ankle joint will inform the development and placements of implants and prostheses.

Torque application helps to diagnose incomplete syndesmotic injuries using weight-bearing computed tomography images

OBJECTIVE

Accurate identification of distal tibio-fibular syndesmotic injuries is essential to limit potential deleterious post-traumatic effects. To date, conventional radiographs, computed tomography (CT), and magnetic resonance imaging (MRI) have shown limited utilization. This cadaver study evaluates the utility of weight-bearing CT scans on the assessment of incomplete and more complete syndesmotic injuries.

MATERIALS AND METHODS

Ten male cadavers (tibial plateau to toe-tip) were included. Weight-bearing CTs were taken under four test conditions, with and without torque on the tibia (corresponding to external rotation of the foot and ankle). First, intact ankles (native) underwent imaging. Second, the anterior-inferior tibio-fibular ligament (AITFL) was transected (condition 1). Then, the deltoid ligament (condition 2) was transected, followed by the interosseous membrane (IOM, condition 3). Finally, the posterior-inferior tibio-fibular ligament (PITFL) was transected (condition 4). The medial clear space (MCS), the tibio-fibular clear space (TFCS), and the tibio-fibular overlap (TFO) were assessed on digitally reconstructed radiographs (DRRs), and on axial CT images.

RESULTS

The TFO differentiated isolated AITFL transection from native ankles when torque was applied. Also under torque conditions, the MCS was a useful predictor of an additional deltoid ligament transection, whereas the TFCS identified cadavers in which the PITFL was also transected.

CONCLUSION

Torque application helps to diagnose incomplete syndesmotic injuries when using weight-bearing CT. The TFO may be useful for identifying incomplete syndesmotic injuries, whereas the MCS and TFCS predict more complete injuries.

Extreme Nailing: Is It Safe to Allow Immediate Weightbearing After Intramedullary Nail Fixation of Extra-articular Distal Tibial Fractures (OTA/AO 43-A)?

OBJECTIVES

To determine whether immediate weightbearing after intramedullary (IM) fixation of extra-articular distal tibial fractures (OTA/AO 43-A) results in a change in alignment before healing.

DESIGN

Retrospective review.

SETTING

Level 1 trauma center.

INTERVENTION

IM nailing of distal tibial fractures.

PATIENTS/PARTICIPANTS

Fifty-three patients with 54 fractures, all of whom could bear weight as tolerated postoperatively. Eighteen fractures were OTA/AO 43-A1, 20 OTA/AO 43-A2, and 16 OTA/AO 43-A3; 20 fractures were open.

MAIN OUTCOME MEASUREMENTS

Change in fracture alignment or loss of position.

RESULTS

Average change from initial angulation at final follow-up was 0.52 ± 1.49 degrees of valgus and 0.48 ± 3.14 degrees of extension. Final alignment was excellent in 14, acceptable in 28, and poor in 12; 2 fractures went from acceptable initial alignment to poor final alignment; and 2 fractures went from excellent to acceptable alignment. Seven fractures had an improvement in alignment over time. Two fractures required free-flap coverage and 4 required staged grafting because of bone loss. Ten fractures had an unplanned return to the operating room (5 for infected nonunion requiring implant exchange, 3 for infection requiring debridement without implant revision, and 2 for aseptic nonunion). No patient had revision for implant failure.

CONCLUSIONS

Immediate weightbearing after IM fixation of extra-articular distal tibial fractures (OTA/AO 43-A) led to minimal change in alignment and seems to be safe for most patients. Complications were consistent with those reported in previous non-weightbearing cohorts.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.