Accuracies of genomic breeding values in American Angus beef cattle using K-means clustering for cross-validation

Tag SNP selection for prediction of adaptation traits in Braford and Hereford cattle using Bayesian methods

This study utilized Bayesian inference in a genome-wide association study (GWAS) to identify genetic markers associated with traits relevant to the adaptation of Hereford and Braford cattle breeds. We focused on eye pigmentation (EP), weaning hair coat (WHC), yearling hair coat (YHC), and breeding standard (BS). Our dataset comprised 126,290 animals in the pedigree. Out of these, 233 sires were genotyped using high-density (HD) chips, and 3750 animals with medium-density (50 K) single-nucleotide polymorphism (SNP) chips. Employing the Bayes B method with a prior probability of π = 0.99, we identified and tagged single nucleotide polymorphisms (Tag SNPs), ranging from 18 to 117 SNPs depending on the trait. These Tag SNPs facilitated the construction of reduced SNP panels. We then evaluated the predictive accuracy of these panels in comparison to traditional medium-density SNP chips. The accuracy of genomic predictions using these reduced panels varied significantly depending on the clustering method, ranging from 0.13 to 0.65. Additionally, we conducted functional enrichment analysis that found genes associated with the most informative SNP markers in the current study, thereby providing biological insights into the genomic basis of these traits.

Use of the linear regression method to evaluate population accuracy of predictions from non-linear models

Background

To address the limitations of commonly used cross-validation methods, the linear regression method (LR) was proposed to estimate population accuracy of predictions based on the implicit assumption that the fitted model is correct. This method also provides two statistics to determine the adequacy of the fitted model. The validity and behavior of the LR method have been provided and studied for linear predictions but not for nonlinear predictions. The objectives of this study were to 1) provide a mathematical proof for the validity of the LR method when predictions are based on conditional means, regardless of whether the predictions are linear or non-linear 2) investigate the ability of the LR method to detect whether the fitted model is adequate or inadequate, and 3) provide guidelines on how to appropriately partition the data into training and validation such that the LR method can identify an inadequate model.

Results

We present a mathematical proof for the validity of the LR method to estimate population accuracy and to determine whether the fitted model is adequate or inadequate when the predictor is the conditional mean, which may be a non-linear function of the phenotype. Using three partitioning scenarios of simulated data, we show that the one of the LR statistics can detect an inadequate model only when the data are partitioned such that the values of relevant predictor variables differ between the training and validation sets. In contrast, we observed that the other LR statistic was able to detect an inadequate model for all three scenarios.

Conclusion

The LR method has been proposed to address some limitations of the traditional approach of cross-validation in genetic evaluation. In this paper, we showed that the LR method is valid when the model is adequate and the conditional mean is the predictor, even when it is a non-linear function of the phenotype. We found one of the two LR statistics is superior because it was able to detect an inadequate model for all three partitioning scenarios (i.e., between animals, by age within animals, and between animals and by age) that were studied.

Enhancing Genomic Prediction Accuracy for Body Conformation Traits in Korean Holstein Cattle

The Holstein breed is the mainstay of dairy production in Korea. In this study, we evaluated the genomic prediction accuracy for body conformation traits in Korean Holstein cattle, using a range of π levels (0.75, 0.90, 0.99, and 0.995) in Bayesian methods (BayesB and BayesC). Focusing on 24 traits, we analyzed the impact of different π levels on prediction accuracy. We observed a general increase in accuracy at higher levels for specific traits, with variations depending on the Bayesian method applied. Notably, the highest accuracy was achieved for rear teat angle when using deregressed estimated breeding values including parent average as a response variable. We further demonstrated that incorporating parent average into deregressed estimated breeding values enhances genomic prediction accuracy, showcasing the effectiveness of the model in integrating both offspring and parental genetic information. Additionally, we identified 18 significant window regions through genome-wide association studies, which are crucial for future fine mapping and discovery of causal mutations. These findings provide valuable insights into the efficiency of genomic selection for body conformation traits in Korean Holstein cattle and highlight the potential for advancements in the prediction accuracy using larger datasets and more sophisticated genomic models.

Strategies to improve genomic predictions for 35 duck carcass traits in an F2 population

BACKGROUND

Carcass traits are crucial for broiler ducks, but carcass traits can only be measured postmortem. Genomic selection (GS) is an effective approach in animal breeding to improve selection and reduce costs. However, the performance of genomic prediction in duck carcass traits remains largely unknown.

RESULTS

In this study, we estimated the genetic parameters, performed GS using different models and marker densities, and compared the estimation performance between GS and conventional BLUP on 35 carcass traits in an F₂ population of ducks. Most of the cut weight traits and intestine length traits were estimated to be high and moderate heritabilities, respectively, while the heritabilities of percentage slaughter traits were dynamic. The reliability of genome prediction using GBLUP increased by an average of 0.06 compared to the conventional BLUP method. The Permutation studies revealed that 50K markers had achieved ideal prediction reliability, while 3K markers still achieved 90.7% predictive capability would further reduce the cost for duck carcass traits. The genomic relationship matrix normalized by our true variance method instead of the widely used [Formula: see text] could achieve an increase in prediction reliability in most traits. We detected most of the bayesian models had a better performance, especially for BayesN. Compared to GBLUP, BayesN can further improve the predictive reliability with an average of 0.06 for duck carcass traits.

CONCLUSION

This study demonstrates genomic selection for duck carcass traits is promising. The genomic prediction can be further improved by modifying the genomic relationship matrix using our proposed true variance method and several Bayesian models. Permutation study provides a theoretical basis for the fact that low-density arrays can be used to reduce genotype costs in duck genome selection.

Genomic Prediction Accuracies for Growth and Carcass Traits in a Brangus Heifer Population

The predictive abilities and accuracies of genomic best linear unbiased prediction (GBLUP) and the Bayesian (BayesA, BayesB, BayesC and Lasso) genomic selection (GS) methods for economically important growth (birth, weaning, and yearling weights) and carcass (depth of rib fat, apercent intramuscular fat and longissimus muscle area) traits were characterized by estimating the linkage disequilibrium (LD) structure in Brangus heifers using single nucleotide polymorphisms (SNP) markers. Sharp declines in LD were observed as distance among SNP markers increased. The application of the GBLUP and the Bayesian methods to obtain the GEBV for growth and carcass traits within k-means and random clusters showed that k-means and random clustering had quite similar heritability estimates, but the Bayesian methods resulted in the lower estimates of heritability between 0.06 and 0.21 for growth and carcass traits compared with those between 0.21 and 0.35 from the GBLUP methodologies. Although the prediction ability of the GBLUP and the Bayesian methods were quite similar for growth and carcass traits, the Bayesian methods overestimated the accuracies of GEBV because of the lower estimates of heritability of growth and carcass traits. However, GBLUP resulted in accuracy of GEBV for growth and carcass traits that parallels previous reports.

Selective genotyping to implement genomic selection in beef cattle breeding

Genomic selection (GS) plays an essential role in livestock genetic improvement programs. In dairy cattle, the method is already a recognized tool to estimate the breeding values of young animals and reduce generation intervals. Due to the different breeding structures of beef cattle, the implementation of GS is still a challenge and has been adopted to a much lesser extent than dairy cattle. This study aimed to evaluate genotyping strategies in terms of prediction accuracy as the first step in the implementation of GS in beef while some restrictions were assumed for the availability of phenotypic and genomic information. For this purpose, a multi-breed population of beef cattle was simulated by imitating the practical system of beef cattle genetic evaluation. Four genotyping scenarios were compared to traditional pedigree-based evaluation. Results showed an improvement in prediction accuracy, albeit a limited number of animals being genotyped (i.e., 3% of total animals in genetic evaluation). The comparison of genotyping scenarios revealed that selective genotyping should be on animals from both ancestral and younger generations. In addition, as genetic evaluation in practice covers traits that are expressed in either sex, it is recommended that genotyping covers animals from both sexes.

Genomic heritability and correlation between carcass traits in Japanese Black cattle evaluated under different ceilings of relatedness among individuals

The investigation of carcass traits to produce meat with high efficiency has been in focus on Japanese Black cattle since 1972. To implement a successful breeding program in carcass production, a comprehensive understanding of genetic characteristics and relationships between the traits is of paramount importance. In this study, genomic heritability and genomic correlation between carcass traits, including carcass weight (CW), rib eye area (REA), rib thickness (RT), subcutaneous fat thickness (SFT), yield rate (YI), and beef marbling score (BMS) were estimated using the genomic data of 9,850 Japanese Black cattle (4,142 heifers and 5,708 steers). In addition, we investigated the effect of genetic relatedness degree on the estimation of genetic parameters of carcass traits in sub-populations created based on different GRM-cutoff values. Genome-based restricted maximum likelihood (GREML) analysis was applied to estimate genetic parameters. Using all animal data, the heritability values for carcass traits were estimated as moderate to relatively high magnitude, ranging from 0.338 to 0.509 with standard errors, ranging from 0.014 to 0.015. The genetic correlations were obtained low and negative between SFT and REA [-0.198 (0.034)] and between SFT and BMS [-0.096 (0.033)] traits, and high and negative between SFT and YI [-0.634 (0.022)]. REA trait was genetically highly correlated with YI and BMS [0.811 (0.012) and 0.625 (0.022), respectively]. In sub-populations created based on the genetic-relatedness ceiling, the heritability estimates ranged from 0.212 (0.131) to 0.647 (0.066). At the genetic-relatedness ceiling of 0.15, the correlation values between most traits with low genomic correlation were overestimated while the correlations between the traits with relatively moderate to high correlations, ranging from 0.380 to 0.811, were underestimated. The values were steady at the ceilings of 0.30-0.95 (sample size of 5,443-9,850) for most of the highly correlated traits. The results demonstrated that there is considerable genetic variation and also favorable genomic correlations between carcass traits. Therefore, the genetic improvement for the traits can be simultaneously attained through genomic selection. In addition, we observed that depending on the degree of relationship between individuals and sample size, the genomic heritability and correlation estimates for carcass traits may be different.

Estimation of Linkage Disequilibrium, Effective Population Size, and Genetic Parameters of Phenotypic Traits in Dabieshan Cattle

Dabieshan cattle (DBSC) are a valuable genetic resource for indigenous cattle breeds in China. It is a small to medium-sized breed with slower growth, but with good meat quality and fat deposition. Genetic markers could be used for the estimation of population genetic structure and genetic parameters. In this work, we genotyped the DBSC breeding population (n = 235) with the GeneSeek Genomic Profiler (GGP) 100 k density genomic chip. Genotype data of 222 individuals and 81,579 SNPs were retained after quality control. The average minor allele frequency (MAF) was 0.20 and the average linkage disequilibrium (LD) level (r²) was 0.67 at a distance of 0-50 Kb. The estimated relationship coefficient and effective population size (Ne) were 0.023 and 86 for the current generation. In addition, we used genotype data to estimate the genetic parameters of the population's phenotypic traits. Among them, height at hip cross (HHC) and shin circumference (SC) were rather high heritability traits, with heritability of 0.41 and 0.54, respectively. The results reflected the current cattle population's extent of inbreeding and history. Through the principal breeding parameters, genomic breeding would significantly improve the genetic progress of breeding.

Genome-wide association and genotype by environment interactions for growth traits in U.S. Red Angus cattle

Background

Genotypic information produced from single nucleotide polymorphism (SNP) arrays has routinely been used to identify genomic regions associated with complex traits in beef and dairy cattle. Herein, we assembled a dataset consisting of 15,815 Red Angus beef cattle distributed across the continental U.S. and a union set of 836,118 imputed SNPs to conduct genome-wide association analyses (GWAA) for growth traits using univariate linear mixed models (LMM); including birth weight, weaning weight, and yearling weight. Genomic relationship matrix heritability estimates were produced for all growth traits, and genotype-by-environment (GxE) interactions were investigated.

Results

Moderate to high heritabilities with small standard errors were estimated for birth weight (0.51 ± 0.01), weaning weight (0.25 ± 0.01), and yearling weight (0.42 ± 0.01). GWAA revealed 12 pleiotropic QTL (BTA6, BTA14, BTA20) influencing Red Angus birth weight, weaning weight, and yearling weight which met a nominal significance threshold (P ≤ 1e-05) for polygenic traits using 836K imputed SNPs. Moreover, positional candidate genes associated with Red Angus growth traits in this study (i.e., LCORL, LOC782905, NCAPG, HERC6, FAM184B, SLIT2, MMRN1, KCNIP4, CCSER1, GRID2, ARRDC3, PLAG1, IMPAD1, NSMAF, PENK, LOC112449660, MOS, SH3PXD2B, STC2, CPEB4) were also previously associated with feed efficiency, growth, and carcass traits in beef cattle. Collectively, 14 significant GxE interactions were also detected, but were less consistent among the investigated traits at a nominal significance threshold (P ≤ 1e-05); with one pleiotropic GxE interaction detected on BTA28 (24 Mb) for Red Angus weaning weight and yearling weight.

Conclusions

Sixteen well-supported QTL regions detected from the GWAA and GxE GWAA for growth traits (birth weight, weaning weight, yearling weight) in U.S. Red Angus cattle were found to be pleiotropic. Twelve of these pleiotropic QTL were also identified in previous studies focusing on feed efficiency and growth traits in multiple beef breeds and/or their composites. In agreement with other beef cattle GxE studies our results implicate the role of vasodilation, metabolism, and the nervous system in the genetic sensitivity to environmental stress.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-022-08667-6.

Genotyping and phenotyping strategies for genetic improvement of meat quality and carcass composition in swine

Background

Meat quality and composition traits have become valuable in modern pork production; however, genetic improvement has been slow due to high phenotyping costs. Combining genomic information with multi-trait indirect selection based on cheaper indicator traits is an alternative for continued cost-effective genetic improvement.

Methods

Data from an ongoing breeding program were used in this study. Phenotypic and genomic information was collected on three-way crossbred and purebred Duroc animals belonging to 28 half-sib families. We applied different methods to assess the value of using purebred and crossbred information (both genomic and phenotypic) to predict expensive-to-record traits measured on crossbred individuals. Estimation of multi-trait variance components set the basis for comparing the different scenarios, together with a fourfold cross-validation approach to validate the phenotyping schemes under four genotyping strategies.

Results

The benefit of including genomic information for multi-trait prediction depended on the breeding goal trait, the indicator traits included, and the source of genomic information. While some traits benefitted significantly from genotyping crossbreds (e.g., loin intramuscular fat content, backfat depth, and belly weight), multi-trait prediction was advantageous for some traits even in the absence of genomic information (e.g., loin muscle weight, subjective color, and subjective firmness).

Conclusions

Our results show the value of using different sources of phenotypic and genomic information. For most of the traits studied, including crossbred genomic information was more beneficial than performing multi-trait prediction. Thus, we recommend including crossbred individuals in the reference population when these are phenotyped for the breeding objective.

A New Deep Learning Calibration Method Enhances Genome-Based Prediction of Continuous Crop Traits

Genomic selection (GS) has the potential to revolutionize predictive plant breeding. A reference population is phenotyped and genotyped to train a statistical model that is used to perform genome-enabled predictions of new individuals that were only genotyped. In this vein, deep neural networks, are a type of machine learning model and have been widely adopted for use in GS studies, as they are not parametric methods, making them more adept at capturing nonlinear patterns. However, the training process for deep neural networks is very challenging due to the numerous hyper-parameters that need to be tuned, especially when imperfect tuning can result in biased predictions. In this paper we propose a simple method for calibrating (adjusting) the prediction of continuous response variables resulting from deep learning applications. We evaluated the proposed deep learning calibration method (DL_M2) using four crop breeding data sets and its performance was compared with the standard deep learning method (DL_M1), as well as the standard genomic Best Linear Unbiased Predictor (GBLUP). While the GBLUP was the most accurate model overall, the proposed deep learning calibration method (DL_M2) helped increase the genome-enabled prediction performance in all data sets when compared with the traditional DL method (DL_M1). Taken together, we provide evidence for extending the use of the proposed calibration method to evaluate its potential and consistency for predicting performance in the context of GS applied to plant breeding.

Genomic Selection in Sugarcane: Current Status and Future Prospects

Sugarcane is a C4 and agro-industry-based crop with a high potential for biomass production. It serves as raw material for the production of sugar, ethanol, and electricity. Modern sugarcane varieties are derived from the interspecific and intergeneric hybridization between Saccharum officinarum, Saccharum spontaneum, and other wild relatives. Sugarcane breeding programmes are broadly categorized into germplasm collection and characterization, pre-breeding and genetic base-broadening, and varietal development programmes. The varietal identification through the classic breeding programme requires a minimum of 12-14 years. The precise phenotyping in sugarcane is extremely tedious due to the high propensity of lodging and suckering owing to the influence of environmental factors and crop management practices. This kind of phenotyping requires data from both plant crop and ratoon experiments conducted over locations and seasons. In this review, we explored the feasibility of genomic selection schemes for various breeding programmes in sugarcane. The genetic diversity analysis using genome-wide markers helps in the formation of core set germplasm representing the total genomic diversity present in the Saccharum gene bank. The genome-wide association studies and genomic prediction in the Saccharum gene bank are helpful to identify the complete genomic resources for cane yield, commercial cane sugar, tolerances to biotic and abiotic stresses, and other agronomic traits. The implementation of genomic selection in pre-breeding, genetic base-broadening programmes assist in precise introgression of specific genes and recurrent selection schemes enhance the higher frequency of favorable alleles in the population with a considerable reduction in breeding cycles and population size. The integration of environmental covariates and genomic prediction in multi-environment trials assists in the prediction of varietal performance for different agro-climatic zones. This review also directed its focus on enhancing the genetic gain over time, cost, and resource allocation at various stages of breeding programmes.

Calibration and validation of predicted genomic breeding values in an advanced cycle maize population

Model training on data from all selection cycles yielded the highest prediction accuracy by attenuating specific effects of individual cycles. Expected reliability was a robust predictor of accuracies obtained with different calibration sets. The transition from phenotypic to genome-based selection requires a profound understanding of factors that determine genomic prediction accuracy. We analysed experimental data from a commercial maize breeding programme to investigate if genomic measures can assist in identifying optimal calibration sets for model training. The data set consisted of six contiguous selection cycles comprising testcrosses of 5968 doubled haploid lines genotyped with a minimum of 12,000 SNP markers. We evaluated genomic prediction accuracies in two independent prediction sets in combination with calibration sets differing in sample size and genomic measures (effective sample size, average maximum kinship, expected reliability, number of common polymorphic SNPs and linkage phase similarity). Our results indicate that across selection cycles prediction accuracies were as high as 0.57 for grain dry matter yield and 0.76 for grain dry matter content. Including data from all selection cycles in model training yielded the best results because interactions between calibration and prediction sets as well as the effects of different testers and specific years were attenuated. Among genomic measures, the expected reliability of genomic breeding values was the best predictor of empirical accuracies obtained with different calibration sets. For grain yield, a large difference between expected and empirical reliability was observed in one prediction set. We propose to use this difference as guidance for determining the weight phenotypic data of a given selection cycle should receive in model retraining and for selection when both genomic breeding values and phenotypes are available.

Genome-wide association and genomic prediction for scrotal circumference in Hereford and Braford bulls

Scrotal circumference (SC) is widely used as a selection criterion for bulls in breeding programs, since it is easily assessed and correlated with several desirable reproductive traits. The objectives of this study were: to perform a genome-wide association study (GWAS) to identify genomic regions associated with SC adjusted for age (SCa) and for both age and weight (SCaw); to select Tag SNPs from GWAS to construct low-density panel for genomic prediction; and to compare the prediction accuracy of the SC through different methods for Braford and Hereford bulls from the same genetic breeding program. Data of SC from 18,172 bulls (30.4 ± 3.7 cm) and of genotypes from 131 sires and 3,545 animals were used. From GWAS, the top 1% of 1-Mb windows were observed on chromosome (BTA) 2, 20, 7, 8, 15, 3, 16, 27, 6 and 8 for SCa and on BTA 8, 15, 16, 21, 19, 2, 6, 5 and 10 for SCaw, representing 17.4% and 18.8% of the additive genetic variance of SCa and SCaw, respectively. The MeSH analysis was able to translate genomic information providing biological meanings of more specific gene functions related to the SCa and SCaw. The genomic enhancement methods, especially single step GBLUP, that combined phenotype and pedigree data with direct genomic values generated gains in accuracy in relation to pedigree BLUP, suggesting that genomic predictions should be applied to improve genetic gain and to narrow the generation interval compared to traditional methods. The proposed Tag-SNP panels may be useful for lower-cost commercial genomic prediction applications in the future, when the number of bulls in the reference population increases for SC in Hereford and Braford breeds.

Predicting the accuracy of genomic predictions

Background

Mathematical models are needed for the design of breeding programs using genomic prediction. While deterministic models for selection on pedigree-based estimates of breeding values (PEBV) are available, these have not been fully developed for genomic selection, with a key missing component being the accuracy of genomic EBV (GEBV) of selection candidates. Here, a deterministic method was developed to predict this accuracy within a closed breeding population based on the accuracy of GEBV and PEBV in the reference population and the distance of selection candidates from their closest ancestors in the reference population.

Methods

The accuracy of GEBV was modeled as a combination of the accuracy of PEBV and of EBV based on genomic relationships deviated from pedigree (DEBV). Loss of the accuracy of DEBV from the reference to the target population was modeled based on the effective number of independent chromosome segments in the reference population (M_e). Measures of M_e derived from the inverse of the variance of relationships and from the accuracies of GEBV and PEBV in the reference population, derived using either a Fisher information or a selection index approach, were compared by simulation.

Results

Using simulation, both the Fisher and the selection index approach correctly predicted accuracy in the target population over time, both with and without selection. The index approach, however, resulted in estimates of M_e that were less affected by heritability, reference size, and selection, and which are, therefore, more appropriate as a population parameter. The variance of relationships underpredicted M_e and was greatly affected by selection. A leave-one-out cross-validation approach was proposed to estimate required accuracies of EBV in the reference population. Aspects of the methods were validated using real data.

Conclusions

A deterministic method was developed to predict the accuracy of GEBV in selection candidates in a closed breeding population. The population parameter M_e that is required for these predictions can be derived from an available reference data set, and applied to other reference data sets and traits for that population. This method can be used to evaluate the benefit of genomic prediction and to optimize genomic selection breeding programs.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12711-021-00647-w.

Validation of the Prediction Accuracy for 13 Traits in Chinese Simmental Beef Cattle Using a Preselected Low-Density SNP Panel

Simple Summary

To reduce the breeding costs and promote the application of genomic selection (GS) in Chinese Simmental beef cattle, we developed a customized low-density single-nucleotide polymorphism (SNP) panel consisting of 30,684 SNPs. When comparing the predictive performance of the low-density SNP panel to that of the BovineHD Beadchip for 13 traits, we found that this ~30 K panel achieved moderate to high prediction accuracies for most traits, while reducing the prediction accuracies of six traits by 0.04–0.09 and decreasing the prediction accuracy of one trait by 0.2. For the remaining six traits, the usage of the low-density SNP panel was associated with a slight increase in prediction accuracy. Our studies suggested that the low-density SNP panel (~30 K) is a feasible and promising tool for cost-effective genomic prediction in Chinese Simmental beef cattle, which may provide breeding organizations with a cheaper option and greater returns on investment.

Abstract

Chinese Simmental beef cattle play a key role in the Chinese beef industry due to their great adaptability and marketability. To achieve efficient genetic gain at a low breeding cost, it is crucial to develop a customized cost-effective low-density SNP panel for this cattle population. Thirteen growth, carcass, and meat quality traits and a BovineHD Beadchip genotyping of 1346 individuals were used to select trait-associated variants and variants contributing to great genetic variance. In addition, highly informative SNPs with high MAF in each 500 kb sliding window and in each genic region were also included separately. A low-density SNP panel consisting of 30,684 SNPs was developed, with an imputation accuracy of 97.4% when imputed to the 770 K level. Among 13 traits, the average prediction accuracy levels evaluated by genomic best linear unbiased prediction (GBLUP) and BayesA/B/Cπ were 0.22–0.47 and 0.18–0.60 for the ~30 K array and BovineHD Beadchip, respectively. Generally, the predictive performance of the ~30 K array was trait-dependent, with reduced prediction accuracies for seven traits. While differences in terms of prediction accuracy were observed among the 13 traits, the low-density SNP panel achieved moderate to high accuracies for most of the traits and even improved the accuracies for some traits.

Comparison of methods for predicting genomic breeding values for growth traits in Nellore cattle

The objective of this study was to evaluate the accuracy of genomic predictions of growth traits in Nellore cattle. Data from 5064 animals belonging to farms that participate in the Conexão DeltaGen and PAINT breeding programs were used. Genotyping was performed with the Illumina BovineHD BeadChip (777,962 SNPs). After quality control of the genomic data, 412,993 SNPs were used. Deregressed EBVs (DEBVs) were calculated using the estimated breeding values (EBVs) and accuracies of birth weight (BW), weight gain from birth to weaning (GBW), postweaning weight gain (PWG), yearling height (YH), and cow weight (CW) provided by GenSys. Three models were used to estimate marker effects: genomic best linear unbiased prediction (GBLUP), BayesCπ, and improved Bayesian least absolute shrinkage and selection operator (IBLASSO). The prediction ability of genomic estimated breeding value (GEBVs) was estimated by the average Pearson correlation between DEBVs and GEBVs, predicted with the different methodologies in the validation populations. The regression coefficients of DEBVs on GEBVs in the validation population were calculated and used as indicators of prediction bias of GEBV. In general, the Bayesian methods provided slightly more accurate predictions of genomic breeding values than GBLUP. The BayesCπ and IBLASSO were similar for all traits (BW, GBW, PWG, and YH), except for CW. Thus, there does not seem to be a more suitable method for the estimation of SNP effects and genomic breeding values. Bayesian regression models are of interest for future applications of genomic selection in this population, but further improvements are needed to reduce deflation of their predictions.

Determining Risk Factors Associated with Depression and Anxiety in Young Lung Cancer Patients: A Novel Optimization Algorithm

Background and Objectives: Identifying risk factors associated with psychiatrist-confirmed anxiety and depression among young lung cancer patients is very difficult because the incidence and prevalence rates are obviously lower than in middle-aged or elderly patients. Due to the nature of these rare events, logistic regression may not successfully identify risk factors. Therefore, this study aimed to propose a novel algorithm for solving this problem. Materials and Methods: A total of 1022 young lung cancer patients (aged 20-39 years) were selected from the National Health Insurance Research Database in Taiwan. A novel algorithm that incorporated a k-means clustering method with v-fold cross-validation into multiple correspondence analyses was proposed to optimally determine the risk factors associated with the depression and anxiety of young lung cancer patients. Results: Five clusters were optimally determined by the novel algorithm proposed in this study. Conclusions: The novel Multiple Correspondence Analysis-k-means (MCA-k-means) clustering algorithm in this study successfully identified risk factors associated with anxiety and depression, which are considered rare events in young patients with lung cancer. The clinical implications of this study suggest that psychiatrists need to be involved at the early stage of initial diagnose with lung cancer for young patients and provide adequate prescriptions of antipsychotic medications for young patients with lung cancer.

Genetic Features of Reproductive Traits in Bovine and Buffalo: Lessons From Bovine to Buffalo

Bovine and buffalo are important livestock species that have contributed to human lives for more than 1000 years. Improving fertility is very important to reduce the cost of production. In the current review, we classified reproductive traits into three categories: ovulation, breeding, and calving related traits. We systematically summarized the heritability estimates, molecular markers, and genomic selection (GS) for reproductive traits of bovine and buffalo. This review aimed to compile the heritability and genome-wide association studies (GWASs) related to reproductive traits in both bovine and buffalos and tried to highlight the possible disciplines which should benefit buffalo breeding. The estimates of heritability of reproductive traits ranged were from 0 to 0.57 and there were wide differences between the populations. For some specific traits, such as age of puberty (AOP) and calving difficulty (CD), the majority beef population presents relatively higher heritability than dairy cattle. Compared to bovine, genetic studies for buffalo reproductive traits are limited for age at first calving and calving interval traits. Several quantitative trait loci (QTLs), candidate genes, and SNPs associated with bovine reproductive traits were screened and identified by candidate gene methods and/or GWASs. The IGF1 and LEP pathways in addition to non-coding RNAs are highlighted due to their crucial relevance with reproductive traits. The distribution of QTLs related to various traits showed a great differences. Few GWAS have been performed so far on buffalo age at first calving, calving interval, and days open traits. In addition, we summarized the GS studies on bovine and buffalo reproductive traits and compared the accuracy between different reports. Taken together, GWAS and candidate gene approaches can help to understand the molecular genetic mechanisms of complex traits. Recently, GS has been used extensively and can be performed on multiple traits to improve the accuracy of prediction even for traits with low heritability, and can be combined with multi-omics for further analysis.

Cross-validation of best linear unbiased predictions of breeding values using an efficient leave-one-out strategy

Empirical estimates of the accuracy of estimates of breeding values (EBV) can be obtained by cross-validation. Leave-one-out cross-validation (LOOCV) is an extreme case of k-fold cross-validation. Efficient strategies for LOOCV of predictions of phenotypes have been developed for a simple model with an overall mean and random marker or animal genetic effects. The objective here was to develop and evaluate an efficient LOOCV method for prediction of breeding values and other random effects under a general mixed linear model with multiple random effects. Conventional LOOCV of EBV requires inverting an (n-1)×(n-1) covariance matrix for each of n (= number of observations) data sets. Our efficient LOOCV obtains the required inverses from the inverse of the covariance matrix for all n observations. The efficient method can be applied to complex models with multiple fixed and random effects, but requires fixed effects to be treated as random, with large variances. An alternative is to precorrect observations using estimates of fixed effects obtained from the complete data, but this can lead to biases. The efficient LOOCV method was compared to conventional LOOCV of predictions of breeding values in terms of computational demands and accuracy. For a data set with 3,205 observations and a model with multiple random and fixed effects, the efficient LOOCV method was 962 times faster than the conventional LOOCV with precorrection for fixed effects based on each training data set but resulted in identical EBV. A computationally efficient LOOCV for prediction of breeding values for single- and multiple-trait mixed models with multiple fixed and random effects was successfully developed. The method enables cross-validation of predictions of breeding values and of any linear combination of random and/or fixed effects, along with leave-one-out precorrection of validation phenotypes.

Invited review: Beef-on-dairy-The generation of crossbred beef × dairy cattle

Because a growing proportion of the beef output in many countries originates from dairy herds, the most critical decisions about the genetic merit of most carcasses harvested are being made by dairy producers. Interest in the generation of more valuable calves from dairy females is intensifying, and the most likely vehicle is the use of appropriately selected beef bulls for mating to the dairy females. This is especially true given the growing potential to undertake more beef × dairy matings as herd metrics improve (e.g., reproductive performance) and technological advances are more widely adopted (e.g., sexed semen). Clear breed differences (among beef breeds but also compared with dairy breeds) exist for a whole plethora of performance traits, but considerable within-breed variability has also been demonstrated. Although such variability has implications for the choice of bull to mate to dairy females, the fact that dairy females themselves exhibit such genetic variability implies that "one size fits all" may not be appropriate for bull selection. Although differences in a whole series of key performance indicators have been documented between beef and beef-on-dairy animals, of particular note is the reported lower environmental hoofprint associated with beef-on-dairy production systems if the environmental overhead of the mature cow is attributed to the milk she eventually produces. Despite the known contribution of beef (i.e., both surplus calves and cull cows) to the overall gross output of most dairy herds globally, and the fact that each dairy female contributes half her genetic merit to her progeny, proxies for meat yield (i.e., veal or beef) are not directly considered in the vast majority of dairy cow breeding objectives. Breeding objectives to identify beef bulls suitable for dairy production systems are now being developed and validated, demonstrating the financial benefit of using such breeding objectives over and above a focus on dairy bulls or easy-calving, short-gestation beef bulls. When this approach is complemented by management-based decision-support tools, considerable potential exists to improve the profitability and sustainability of modern dairy production systems by exploiting beef-on-dairy breeding strategies using the most appropriate beef bulls.

Genomic prediction ability for feed efficiency traits using different models and pseudo-phenotypes under several validation strategies in Nelore cattle

There is a growing interest to improve feed efficiency (FE) traits in cattle. The genomic selection was proposed to improve these traits since they are difficult and expensive to measure. Up to date, there are scarce studies about the implementation of genomic selection for FE traits in indicine cattle under different scenarios of pseudo-phenotypes, models, and validation strategies on a commercial large scale. Thus, the aim was to evaluate the feasibility of genomic selection implementation for FE traits in Nelore cattle applying different models and pseudo-phenotypes under validation strategies. Phenotypic and genotypic information from 4 329 and 3 467 animals were used, respectively, which were tested for residual feed intake, DM intake, feed efficiency, feed conversion ratio, residual BW gain, and residual intake and BW gain. Six prediction methods were used: single-step genomic best linear unbiased prediction, Bayes A, Bayes B, Bayes Cπ, Bayesian least absolute shrinkage and selection operator (BLASSO), and Bayes R. Phenotypes adjusted for fixed effects (Y*), estimated breeding value (EBV), and EBV deregressed (DEBV) were used as pseudo-phenotypes. The validation approaches used were: (1) random: the data was randomly divided into ten subsets and the validation was done in each subset at a time; (2) age: the partition into training and testing sets was based on year of birth and testing animals were born after 2016; and (3) EBV accuracy: the data was split into two groups, being animals with accuracy above 0.45 the training set; and below 0.45 the validation set. In the analyses that used the Y* as pseudo-phenotype, prediction ability (PA) was obtained by dividing the correlation between pseudo-phenotype and genomic EBV (GEBV) by the square root of the heritability of the trait. When EBV and DEBV were used as the pseudo-phenotype, the simple correlation of this quantity with the GEBV was considered as PA. The prediction methods show similar results for PA and bias. The random cross-validation presented higher PA (0.17) than EBV accuracy (0.14) and age (0.13). The PA was higher for Y* than for EBV and DEBV (30.0 and 34.3%, respectively). Random validation presented the highest PA, being indicated for use in populations composed mainly of young animals and traits with few generations of data recording. For high heritability traits, the validation can be done by age, enabling the prediction of the next-generation genetic merit. These results would support breeders to identify genomic approaches that are more viable for genomic prediction for FE-related traits.

Improving the accuracy of genomic evaluation for linear body measurement traits using single-step genomic best linear unbiased prediction in Hanwoo beef cattle

BACKGROUND

Recently, there has been a growing interest in the genetic improvement of body measurement traits in farm animals. They are widely used as predictors of performance, longevity, and production traits, and it is worthwhile to investigate the prediction accuracies of genomic selection for these traits. In genomic prediction, the single-step genomic best linear unbiased prediction (ssGBLUP) method allows the inclusion of information from genotyped and non-genotyped relatives in the analysis. Hence, we aimed to compare the prediction accuracy obtained from a pedigree-based BLUP only on genotyped animals (PBLUP-G), a traditional pedigree-based BLUP (PBLUP), a genomic BLUP (GBLUP), and a single-step genomic BLUP (ssGBLUP) method for the following 10 body measurement traits at yearling age of Hanwoo cattle: body height (BH), body length (BL), chest depth (CD), chest girth (CG), chest width (CW), hip height (HH), hip width (HW), rump length (RL), rump width (RW), and thurl width (TW). The data set comprised 13,067 phenotypic records for body measurement traits and 1523 genotyped animals with 34,460 single-nucleotide polymorphisms. The accuracy for each trait and model was estimated only for genotyped animals using five-fold cross-validations.

RESULTS

The accuracies ranged from 0.02 to 0.19, 0.22 to 0.42, 0.21 to 0.44, and from 0.36 to 0.55 as assessed using the PBLUP-G, PBLUP, GBLUP, and ssGBLUP methods, respectively. The average predictive accuracies across traits were 0.13 for PBLUP-G, 0.34 for PBLUP, 0.33 for GBLUP, and 0.45 for ssGBLUP methods. Our results demonstrated that averaged across all traits, ssGBLUP outperformed PBLUP and GBLUP by 33 and 43%, respectively, in terms of prediction accuracy. Moreover, the least root of mean square error was obtained by ssGBLUP method.

CONCLUSIONS

Our findings suggest that considering the ssGBLUP model may be a promising way to ensure acceptable accuracy of predictions for body measurement traits, especially for improving the prediction accuracy of selection candidates in ongoing Hanwoo breeding programs.

Development of SNP-Based Genomic Tools for the Canadian Bison Industry: Parentage Verification and Subspecies Composition

Genomic technologies have been increasingly applied in livestock production due to their utility in production management and animal genetic improvement. The current project aimed to develop genomic resources for the Canadian bison industry, specifically a parentage verification tool and a subspecies composition tool. Both products stand to help with building and maintaining purebred and crossbred bison populations, and in turn bison conservation and production. The development of this genomic toolkit proceeded in two stages. In the single-nucleotide polymorphism (SNP) discovery and selection stage, raw sequence information from 41 bison samples was analyzed, and approximately 52.5 million candidate biallelic SNPs were discovered from 21 samples with high sequence quality. A set of 19,954 SNPs (2,928 for parentage verification and 17,026 for subspecies composition) were then selected for inclusion on an Axiom myDesign custom array. In the refinement and validation stage, 480 bison were genotyped using the custom SNP panel, and the resulting genotypes were analyzed to further filter SNPs and assess tool performance. In various tests using real and simulated genotypes, the two genomic tools showed excellent performance for their respective tasks. Final SNP sets consisting of 191 SNPs for parentage and 17,018 SNPs for subspecies composition are described. As the first SNP-based genomic toolkit designed for the Canadian bison industry, our results may provide a new opportunity in improving the competitiveness and profitability of the industry in a sustainable manner.

Assessing Accuracy of Genomic Predictions for Resistance to Infectious Hematopoietic Necrosis Virus With Progeny Testing of Selection Candidates in a Commercial Rainbow Trout Breeding Population

Infectious hematopoietic necrosis (IHN) is an economically important disease of salmonid fish caused by the IHN virus (IHNV). Under industrial aquaculture settings, IHNV can cause substantial mortality and losses. Actually, there is no confirmed and cost-effective method for IHNV control. Clear Springs Foods, Inc. has been performing family-based selective breeding to increase genetic resistance to IHNV in their rainbow trout breeding program. In an earlier study, we used siblings cross-validation to estimate the accuracy of genomic prediction (GP) for IHNV resistance in this breeding population. In the present report, we used empirical progeny testing data to evaluate whether genomic selection (GS) can improve the accuracy of breeding value predictions over traditional pedigree-based best linear unbiased predictions (PBLUP). We found that the GP accuracy with single-step GBLUP (ssGBLUP) outperformed PBLUP by 15% (from 0.33 to 0.38). Furthermore, we found that ssGBLUP had higher GP accuracy than weighted ssGBLUP (wssGBLUP) and single-step Bayesian multiple regression (ssBMR) models with BayesB and BayesC priors which supports our previous findings that the underlying liability of genetic resistance against IHNV in this breeding population might be polygenic. Our results show that GS can be more effective than either the traditional pedigree-based PBLUP model or the marker-assisted selection approach for improving genetic resistance against IHNV in this commercial rainbow trout population.

Accuracies of Genomic Prediction for Growth Traits at Weaning and Yearling Ages in Yak

Genomic selection is a promising breeding strategy that has been used in considerable numbers of breeding projects due to its highly accurate results. Yak are rare mammals that are remarkable because of their ability to survive in the extreme and harsh conditions predominantly at the so-called "roof of the world"-the Qinghai-Tibetan Plateau. In the current study, we conducted an exploration of the feasibility of genomic evaluation and compared the predictive accuracy of early growth traits with five different approaches. In total, four growth traits were measured in 354 yaks, including body weight, withers height, body length, and chest girth in two early stages of development (weaning and yearling). Genotyping was implemented using the Illumina BovineHD BeadChip. The predictive accuracy was calculated through five-fold cross-validation in five classical statistical methods including genomic best linear unbiased prediction (GBLUP) and four Bayesian methods. Body weights at 30 months in the same yak population were also measured to evaluate the prediction at 6 months. The results indicated that the predictive accuracy for the early growth traits of yak ranged from 0.147 to 0.391. Similar performance was found for the GBLUP and Bayesian methods for most growth traits. Among the Bayesian methods, Bayes B outperformed Bayes A in the majority of traits. The average correlation coefficient between the prediction at 6 months using different methods and observations at 30 months was 0.4. These results indicate that genomic prediction is feasible for early growth traits in yak. Considering that genomic selection is necessary in yak breeding projects, the present study provides promising reference for future applications.

Validation of single-step GBLUP genomic predictions from threshold models using the linear regression method: An application in chicken mortality

The objective of this study was to determine whether the linear regression (LR) method could be used to validate genomic threshold models. Statistics for the LR method were computed from estimated breeding values (EBVs) using the whole and truncated data sets with variances from the reference and validation populations. The method was tested using simulated and real chicken data sets. The simulated data set included 10 generations of 4,500 birds each; genotypes were available for the last three generations. Each animal was assigned a continuous trait, which was converted to a binary score assuming an incidence of failure of 7%. The real data set included the survival status of 186,596 broilers (mortality rate equal to 7.2%) and genotypes of 18,047 birds. Both data sets were analysed using best linear unbiased predictor (BLUP) or single-step GBLUP (ssGBLUP). The whole data set included all phenotypes available, whereas in the partial data set, phenotypes of the most recent generation were removed. In the simulated data set, the accuracies based on the LR formulas were 0.45 for BLUP and 0.76 for ssGBLUP, whereas the correlations between true breeding values and EBVs (i.e. true accuracies) were 0.37 and 0.65, respectively. The gain in accuracy by adding genomic information was overestimated by 0.09 when using the LR method compared to the true increase in accuracy. However, when the estimated ratio between the additive variance computed based on pedigree only and on pedigree and genomic information was considered, the difference between true and estimated gain was <0.02. Accuracies of BLUP and ssGBLUP with the real data set were 0.41 and 0.47, respectively. This small improvement in accuracy when using ssGBLUP with the real data set was due to population structure and lower heritability. The LR method is a useful tool for estimating improvements in accuracy of EBVs due to the inclusion of genomic information when traditional validation methods as k-fold validation and predictive ability are not applicable.

Bias and accuracy of dairy sheep evaluations using BLUP and SSGBLUP with metafounders and unknown parent groups

Background

Bias has been reported in genetic or genomic evaluations of several species. Common biases are systematic differences between averages of estimated and true breeding values, and their over- or under-dispersion. In addition, comparing accuracies of pedigree versus genomic predictions is a difficult task. This work proposes to analyse biases and accuracies in the genetic evaluation of milk yield in Manech Tête Rousse dairy sheep, over several years, by testing five models and using the estimators of the linear regression method. We tested models with and without genomic information [best linear unbiased prediction (BLUP) and single-step genomic BLUP (SSGBLUP)] and using three strategies to handle missing pedigree [unknown parent groups (UPG), UPG with QP transformation in the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathbf{H}}$$\end{document}H matrix (EUPG) and metafounders (MF)].

Methods

We compared estimated breeding values (EBV) of selected rams at birth with the EBV of the same rams obtained each year from the first daughters with phenotypes up to 2017. We compared within and across models. Finally, we compared EBV at birth of the rams with and without genomic information.

Results

Within models, bias and over-dispersion were small (bias: 0.20 to 0.40 genetic standard deviations; slope of the dispersion: 0.95 to 0.99) except for model SSGBLUP-EUPG that presented an important over-dispersion (0.87). The estimates of accuracies confirm that the addition of genomic information increases the accuracy of EBV in young rams. The smallest bias was observed with BLUP-MF and SSGBLUP-MF. When we estimated dispersion by comparing a model with no markers to models with markers, SSGBLUP-MF showed a value close to 1, indicating that there was no problem in dispersion, whereas SSGBLUP-EUPG and SSGBLUP-UPG showed a significant under-dispersion. Another important observation was the heterogeneous behaviour of the estimates over time, which suggests that a single check could be insufficient to make a good analysis of genetic/genomic evaluations.

Conclusions

The addition of genomic information increases the accuracy of EBV of young rams in Manech Tête Rousse. In this population that has missing pedigrees, the use of UPG and EUPG in SSGBLUP produced bias, whereas MF yielded unbiased estimates, and we recommend its use. We also recommend assessing biases and accuracies using multiple truncation points, since these statistics are subject to random variation across years.

Improving Prediction Accuracy Using Multi-allelic Haplotype Prediction and Training Population Optimization in Wheat

The use of haplotypes may improve the accuracy of genomic prediction over single SNPs because haplotypes can better capture linkage disequilibrium and genomic similarity in different lines and may capture local high-order allelic interactions. Additionally, prediction accuracy could be improved by portraying population structure in the calibration set. A set of 383 advanced lines and cultivars that represent the diversity of the University of Minnesota wheat breeding program was phenotyped for yield, test weight, and protein content and genotyped using the Illumina 90K SNP Assay. Population structure was confirmed using single SNPs. Haplotype blocks of 5, 10, 15, and 20 adjacent markers were constructed for all chromosomes. A multi-allelic haplotype prediction algorithm was implemented and compared with single SNPs using both k-fold cross validation and stratified sampling optimization. After confirming population structure, the stratified sampling improved the predictive ability compared with k-fold cross validation for yield and protein content, but reduced the predictive ability for test weight. In all cases, haplotype predictions outperformed single SNPs. Haplotypes of 15 adjacent markers showed the best improvement in accuracy for all traits; however, this was more pronounced in yield and protein content. The combined use of haplotypes of 15 adjacent markers and training population optimization significantly improved the predictive ability for yield and protein content by 14.3 (four percentage points) and 16.8% (seven percentage points), respectively, compared with using single SNPs and k-fold cross validation. These results emphasize the effectiveness of using haplotypes in genomic selection to increase genetic gain in self-fertilized crops.

Genomic Analysis Using Bayesian Methods under Different Genotyping Platforms in Korean Duroc Pigs

Simple Summary

This study investigated the informative regions and the efficiency of genomic predictions for backfat thickness, days to 90 kg body weight, loin muscle area, and lean percentage in Korean Duroc pigs. The several regions of the genome were identified and a significant marker was found near the MC4R gene for growth and production-related traits. No differences in genomic accuracy were identified on the basis of the Bayesian approaches in these four growth and production-related traits. The genomic accuracy is improved by using deregressed estimated breeding values including parental information as a response variable in Korean Duroc pigs.

Abstract

Genomic evaluation has been widely applied to several species using commercial single nucleotide polymorphism (SNP) genotyping platforms. This study investigated the informative genomic regions and the efficiency of genomic prediction by using two Bayesian approaches (BayesB and BayesC) under two moderate-density SNP genotyping panels in Korean Duroc pigs. Growth and production records of 1026 individuals were genotyped using two medium-density, SNP genotyping platforms: Illumina60K and GeneSeek80K. These platforms consisted of 61,565 and 68,528 SNP markers, respectively. The deregressed estimated breeding values (DEBVs) derived from estimated breeding values (EBVs) and their reliabilities were taken as response variables. Two Bayesian approaches were implemented to perform the genome-wide association study (GWAS) and genomic prediction. Multiple significant regions for days to 90 kg (DAYS), lean muscle area (LMA), and lean percent (PCL) were detected. The most significant SNP marker, located near the MC4R gene, was detected using GeneSeek80K. Accuracy of genomic predictions was higher using the GeneSeek80K SNP panel for DAYS (Δ2%) and LMA (Δ2–3%) with two response variables, with no gains in accuracy by the Bayesian approaches in four growth and production-related traits. Genomic prediction is best derived from DEBVs including parental information as a response variable between two DEBVs regardless of the genotyping platform and the Bayesian method for genomic prediction accuracy in Korean Duroc pig breeding.

Current status of genomic evaluation

Early application of genomic selection relied on SNP estimation with phenotypes or de-regressed proofs (DRP). Chips of 50k SNP seemed sufficient for an accurate estimation of SNP effects. Genomic estimated breeding values (GEBV) were composed of an index with parent average, direct genomic value, and deduction of a parental index to eliminate double counting. Use of SNP selection or weighting increased accuracy with small data sets but had minimal to no impact with large data sets. Efforts to include potentially causative SNP derived from sequence data or high-density chips showed limited or no gain in accuracy. After the implementation of genomic selection, EBV by BLUP became biased because of genomic preselection and DRP computed based on EBV required adjustments, and the creation of DRP for females is hard and subject to double counting. Genomic selection was greatly simplified by single-step genomic BLUP (ssGBLUP). This method based on combining genomic and pedigree relationships automatically creates an index with all sources of information, can use any combination of male and female genotypes, and accounts for preselection. To avoid biases, especially under strong selection, ssGBLUP requires that pedigree and genomic relationships are compatible. Because the inversion of the genomic relationship matrix (G) becomes costly with more than 100k genotyped animals, large data computations in ssGBLUP were solved by exploiting limited dimensionality of genomic data due to limited effective population size. With such dimensionality ranging from 4k in chickens to about 15k in cattle, the inverse of G can be created directly (e.g., by the algorithm for proven and young) at a linear cost. Due to its simplicity and accuracy, ssGBLUP is routinely used for genomic selection by the major chicken, pig, and beef industries. Single step can be used to derive SNP effects for indirect prediction and for genome-wide association studies, including computations of the P-values. Alternative single-step formulations exist that use SNP effects for genotyped or for all animals. Although genomics is the new standard in breeding and genetics, there are still some problems that need to be solved. This involves new validation procedures that are unaffected by selection, parameter estimation that accounts for all the genomic data used in selection, and strategies to address reduction in genetic variances after genomic selection was implemented.

Accuracies of direct genomic breeding values for birth and weaning weights of registered Charolais cattle in Mexico

Context Genomic prediction is now routinely used in many livestock species to rank individuals based on genomic breeding values (GEBV). Aims This study reports the first assessment aimed to evaluate the accuracy of direct GEBV for birth (BW) and weaning (WW) weights of registered Charolais cattle in Mexico. Methods The population assessed included 823 animals genotyped with an array of 77000 single nucleotide polymorphisms. Genomic prediction used genomic best linear unbiased prediction (GBLUP), Bayes C (BC), and single-step Bayesian regression (SSBR) methods in comparison with a pedigree-based BLUP method. Key results Our results show that the genomic prediction methods provided low and similar accuracies to BLUP. The prediction accuracy of GBLUP and BC were identical at 0.31 for BW and 0.29 for WW, similar to BLUP. Prediction accuracies of SSBR for BW and WW were up to 4% higher than those by BLUP. Conclusions Genomic prediction is feasible under current conditions, and provides a slight improvement using SSBR. Implications Some limitations on reference population size and structure were identified and need to be addressed to obtain more accurate predictions in liveweight traits under the prevalent cattle breeding conditions of Mexico.

Genome-wide association and genotype by environment interactions for growth traits in U.S. Gelbvieh cattle

BACKGROUND

Single nucleotide polymorphism (SNP) arrays have facilitated discovery of genetic markers associated with complex traits in domestic cattle; thereby enabling modern breeding and selection programs. Genome-wide association analyses (GWAA) for growth traits were conducted on 10,837 geographically diverse U.S. Gelbvieh cattle using a union set of 856,527 imputed SNPs. Birth weight (BW), weaning weight (WW), and yearling weight (YW) were analyzed using GEMMA and EMMAX (via imputed genotypes). Genotype-by-environment (GxE) interactions were also investigated.

RESULTS

GEMMA and EMMAX produced moderate marker-based heritability estimates that were similar for BW (0.36-0.37, SE = 0.02-0.06), WW (0.27-0.29, SE = 0.01), and YW (0.39-0.41, SE = 0.01-0.02). GWAA using 856K imputed SNPs (GEMMA; EMMAX) revealed common positional candidate genes underlying pleiotropic QTL for Gelbvieh growth traits on BTA6, BTA7, BTA14, and BTA20. The estimated proportion of phenotypic variance explained (PVE) by the lead SNP defining these QTL (EMMAX) was larger and most similar for BW and YW, and smaller for WW. Collectively, GWAAs (GEMMA; EMMAX) produced a highly concordant set of BW, WW, and YW QTL that met a nominal significance level (P ≤ 1e-05), with prioritization of common positional candidate genes; including genes previously associated with stature, feed efficiency, and growth traits (i.e., PLAG1, NCAPG, LCORL, ARRDC3, STC2). Genotype-by-environment QTL were not consistent among traits at the nominal significance threshold (P ≤ 1e-05); although some shared QTL were apparent at less stringent significance thresholds (i.e., P ≤ 2e-05).

CONCLUSIONS

Pleiotropic QTL for growth traits were detected on BTA6, BTA7, BTA14, and BTA20 for U.S. Gelbvieh beef cattle. Seven QTL detected for Gelbvieh growth traits were also recently detected for feed efficiency and growth traits in U.S. Angus, SimAngus, and Hereford cattle. Marker-based heritability estimates and the detection of pleiotropic QTL segregating in multiple breeds support the implementation of multiple-breed genomic selection.

Comparison of conventional BLUP and single-step genomic BLUP evaluations for yearling weight and carcass traits in Hanwoo beef cattle using single trait and multi-trait models

Hanwoo, an important indigenous and popular breed of beef cattle in Korea, shows rapid growth and has high meat quality. Its yearling weight (YW) and carcass traits (backfat thickness, carcass weight- CW, eye muscle area, and marbling score) are economically important for selection of young and proven bulls. However, measuring carcass traits is difficult and expensive, and can only be performed postmortem. Genomic selection has become an appealing procedure for genetic evaluation of these traits (by inclusion of the genomic data) along with the possibility of multi-trait analysis. The aim of this study was to compare conventional best linear unbiased prediction (BLUP) and single-step genomic BLUP (ssGBLUP) methods, using both single-trait (ST-BLUP, ST-ssGBLUP) and multi-trait (MT-BLUP, MT-ssGBLUP) models to investigate the improvement of breeding-value accuracy for carcass traits and YW. The data comprised of 15,279 phenotypic records for YW and 5,824 records for carcass traits, and 1,541 genotyped animals for 34,479 single-nucleotide polymorphisms. Accuracy for each trait and model was estimated only for genotyped animals by five-fold cross-validation. ssGBLUP models (ST-ssGBLUP and MT-ssGBLUP) showed ~19% and ~36% greater accuracy than conventional BLUP models (ST-BLUP and MT-BLUP) for YW and carcass traits, respectively. Within ssGBLUP models, the accuracy of the genomically estimated breeding value for CW increased (19%) when ST-ssGBLUP was replaced with the MT-ssGBLUP model, as the inclusion of YW in the analysis led to a strong genetic correlation with CW (0.76). For backfat thickness, eye muscle area, and marbling score, ST- and MT-ssGBLUP models yielded similar accuracy. Thus, combining pedigree and genomic data via the ssGBLUP model may be a promising way to ensure acceptable accuracy of predictions, especially among young animals, for ongoing Hanwoo cattle breeding programs. MT-ssGBLUP is highly recommended when phenotypic records are limited for one of the two highly correlated genetic traits.

Theoretical Evaluation of Multi-Breed Genomic Prediction in Chinese Indigenous Cattle

Simple Summary

In order to evaluate the potential application of genomic selection (GS) for Chinese indigenous cattle, we assessed the influence of combining multiple populations on the reliability of genomic predictions for 10 indigenous breeds of Chinese cattle using simulated data. We found the predictive accuracies to be low when the reference and validation populations were sampled from different breeds. When using multiple breeds for the reference population, the predictive accuracies were higher if the reference was comprised of breeds with close relationships. In addition, the accuracy increased in all scenarios when the heritability increased, and the genetic architecture of the QTL can affect genomic prediction. Our study suggested that the application of meta-populations can increase accuracy in scenarios with a reduced size of reference populations.

Abstract

Genomic selection (GS) has been widely considered as a valuable strategy for enhancing the rate of genetic gain in farm animals. However, the construction of a large reference population is a big challenge for small populations like indigenous cattle. In order to evaluate the potential application of GS for Chinese indigenous cattle, we assessed the influence of combining multiple populations on the reliability of genomic predictions for 10 indigenous breeds of Chinese cattle using simulated data. Also, we examined the effect of different genetic architecture on prediction accuracy. In this study, we simulated a set of genotype data by a resampling approach which can reflect the realistic linkage disequilibrium pattern for multiple populations. We found within-breed evaluations yielded the highest accuracies ranged from 0.64 to 0.68 for four different simulated genetic architectures. For scenarios using multiple breeds as reference, the predictive accuracies were higher when the reference was comprised of breeds with a close relationship, while the accuracies were low when prediction were carried out among breeds. In addition, the accuracy increased in all scenarios with the heritability increased. Our results suggested that using meta-population as reference can increase accuracy of genomic predictions for small populations. Moreover, multi-breed genomic selection was feasible for Chinese indigenous populations with genetic relationships.

Accuracies of genomic prediction for twenty economically important traits in Chinese Simmental beef cattle

Genomic prediction has been widely utilized to estimate genomic breeding values (GEBVs) in farm animals. In this study, we conducted genomic prediction for 20 economically important traits including growth, carcass and meat quality traits in Chinese Simmental beef cattle. Five approaches (GBLUP, BayesA, BayesB, BayesCπ and BayesR) were used to estimate the genomic breeding values. The predictive accuracies ranged from 0.159 (lean meat percentage estimated by BayesCπ) to 0.518 (striploin weight estimated by BayesR). Moreover, we found that the average predictive accuracies across 20 traits were 0.361, 0.361, 0.367, 0.367 and 0.378, and the averaged regression coefficients were 0.89, 0.86, 0.89, 0.94 and 0.95 for GBLUP, BayesA, BayesB, BayesCπ and BayesR respectively. The genomic prediction accuracies were mostly moderate and high for growth and carcass traits, whereas meat quality traits showed relatively low accuracies. We concluded that Bayesian regression approaches, especially for BayesR and BayesCπ, were slightly superior to GBLUP for most traits. Increasing with the sizes of reference population, these two approaches are feasible for future application of genomic selection in Chinese beef cattle.

Genome-wide association study and genomic predictions for exterior traits in Yorkshire pigs1

The objectives of this study were to identify informative genomic regions that affect the exterior traits of purebred Korean Yorkshire pigs and to investigate and compare the accuracy of genomic prediction for response variables. Phenotypic data on body height (BH), body length (BL), and total teat number (TTN) from 2,432 Yorkshire pigs were used to obtain breeding values including as response variable the estimated breeding value (EBV) and 2 types of deregressed EBVs-one including the parent average (DEBVincPA) and the other excluding it (DEBVexcPA). A final genotype panel comprising 46,199 SNP markers was retained for analysis after quality control for common SNPs. The BayesB and BayesC methods-with various π and weighted response variables (EBV, DEBVincPA, or DEBVexcPA)-were used to estimate SNP effects, through the genome-wide association study. The significance of genomic windows (1 Mb) was obtained at 1.0% additive genetic variance and was subsequently used to identify informative genomic regions. Furthermore, SNPs with a high model frequency (≥0.90) were considered informative. The accuracy of genomic prediction was estimated using a 5-fold cross-validation with the K-means clustering method. Genomic accuracy was measured as the genomic correlation between the molecular breeding value and the individual weighted response variables (EBV, DEBVincPA, or DEBVexcPA). The number of identified informative windows (1 Mb) for BH, BL, and TTN was 4, 3, and 4, respectively. The number of significant SNPs for BH, BL, and TTN was 6, 4, and 5, respectively. Diversity π did not influence the accuracy of genomic prediction. The BayesB method showed slightly higher genomic accuracy for exterior traits than BayesC method in this study. In addition, the genomic accuracy using DEBVincPA as response variable was higher than that using other response variables. Therefore, the genomic accuracy using BayesB (π = 0.90) with DEBVinPA as a response variable was the most effective in this study. The genomic accuracy values for BH, BL, and TTN were calculated to be 0.52, 0.60, and 0.51, respectively.

Genomic selection on shelling percentage and other traits for maize

Genomic selection (GS) is the one of the new method for molecular marker-assisted selection (MAS) that can improve selection efficiency and thereby accelerate selective breeding progress. In the present study, we used the exotic germplasm LK1 to improve the shelling percentage of Qi319 by GS. Genome-wide marker effects for each trait were estimated based on the performance of the testcross and SNP data for F₂ progenies in the training population. The accuracy of genomic predictions was estimated as the correlation between marker-predicted genotypic values and phenotypic values of the testcrosses for each trait in the validation population. Our study result indicated that selection response for shell percentage was 33.7%, which is greater than those for grain yield, kernel number per ear, or grain moisture at harvest. Selection response for tassel branch number and weight per 100 kernels was greater than 60%. The Higher trait heritability resulted in better prediction efficiency; Prediction accuracy increased with the training population size; Prediction efficiency did not differ significantly between SNP densities of 1000 bp and 55,000 bp. The results of the present research project will provide a basis for genome-wide selection technology in maize breeding, and lay the groundwork for the application of GS to germplasms that are useful in China.

Genomic Evaluation for a Crossbreeding System Implementing Breed-of-Origin for Targeted Markers

The genome in crossbred animals is a mosaic of genomic regions inherited from the different parental breeds. We previously showed that effects of haplotypes strongly associated with crossbred performance are different depending upon from which parental breed they are inherited, however, the majority of the genomic regions are not or only weakly associated with crossbred performance. Therefore, our objective was to develop a model that distinguishes between selected single nucleotide polymorphisms (SNP) strongly associated with crossbred performance and all remaining SNP. For the selected SNP, breed-specific allele effects were fitted whereas for the remaining SNP it was assumed that effects are the same across breeds (SEL-BOA model). We used data from three purebred populations; S, LR, and LW, and the corresponding crossbred population. We selected SNP that explained together either 5 or 10% of the total crossbred genetic variance for average daily gain in each breed of origin. The model was compared to a model where all SNP-alleles were allowed to have different effects for crossbred performance depending upon the breed of origin (BOA model) and to a model where all SNP-alleles had the same effect for crossbred performance across breeds (G model). Across the models, the heritability for crossbred performance was very similar with values of 0.29-0.30. With the SEL-BOA models, in general, the purebred-crossbred genetic correlation (rpc) for the selected SNP was larger than for the non-selected SNP. For breed LR, the rpc for selected SNP and non-selected SNP estimated with the SEL-BOA 5% and SEL-BOA 10% were very different compared to the rpc estimated with the G or BOA model. For breeds S and LW, there was not a big discrepancy for the rpc estimated with the SEL-BOA models and with the G or BOA model. The BOA model calculates more accurate breeding values of purebred animals for crossbred performance than the G model when rpc differs (≈10%) between the G and the BOA model. Superiority of the SEL-BOA model compared to the BOA model was only observed for SEL-BOA 10% and when rpc for the selected and non-selected SNP differed both (≈20%) from the rpc estimated by the G or BOA model.

The impact of clustering methods for cross-validation, choice of phenotypes, and genotyping strategies on the accuracy of genomic predictions

For genomic predictors to be of use in genetic evaluation, their predicted accuracy must be a reliable indicator of their utility, and thus unbiased. The objective of this paper was to evaluate the accuracy of prediction of genomic breeding values (GBV) using different clustering strategies and response variables. Red Angus genotypes (n = 9,763) were imputed to a reference 50K panel. The influence of clustering method [k-means, k-medoids, principal component (PC) analysis on the numerator relationship matrix (A) and the identical-by-state genomic relationship matrix (G) as both data and covariance matrices, and random] and response variables [deregressed estimated breeding values (DEBV) and adjusted phenotypes] were evaluated for cross-validation. The GBV were estimated using a Bayes C model for all traits. Traits for DEBV included birth weight (BWT), marbling (MARB), rib-eye area (REA), and yearling weight (YWT). Adjusted phenotypes included BWT, YWT, and ultrasonically measured intramuscular fat percentage and REA. Prediction accuracies were estimated using the genetic correlation between GBV and associated response variable using a bivariate animal model. A simulation mimicking a cattle population, replicated 5 times, was conducted to quantify differences between true and estimated accuracies. The simulation used the same clustering methods and response variables, with the addition of 2 genotyping strategies (random and top 25% of individuals), and forward validation. The prediction accuracies were estimated similarly, and true accuracies were estimated as the correlation between the residuals of a bivariate model including true breeding value (TBV) and GBV. Using the adjusted Rand index, random clusters were clearly different from relationship-based clustering methods. In both real and simulated data, random clustering consistently led to the largest estimates of accuracy, while no method was consistently associated with more or less bias than other methods. In simulation, random genotyping led to higher estimated accuracies than selection of the top 25% of individuals. Interestingly, random genotyping seemed to overpredict true accuracy while selective genotyping tended to underpredict accuracy. When forward in time validation was used, DEBV led to less biased estimates of GBV accuracy. Results suggest the highest, least biased GBV accuracies are associated with random genotyping and DEBV.

Across-years prediction of hybrid performance in maize using genomics

Inclusion of historical training data improved the genomics-based prediction of performance of maize hybrids, the extent depending on the phenotypic trait and genotype-by-year interaction. Prediction of hybrid performance using existing phenotypic data on previous hybrids combined with molecular data collected on the parent lines allows to identify the most promising candidates from a huge number of possible hybrids at an early stage. Phenotypic data on yield and dry matter of 1970 grain maize hybrids from 19 years of a public breeding program were aggregated considering the underlying structure of factorial sets of hybrids. Pedigree records and 50 K SNP data were collected on their 170 Dent and 127 Flint parent lines. The performance of untested hybrids was predicted by best linear unbiased predictors (BLUP) on basis of pedigree or genomic data. For composition of training sets (TRN) and test sets (TST), three schemes for collecting factorials from specific years were employed which resulted in 490 scenarios. For each scenario, the predictive ability and genomic relationship between TRN and TST hybrids were determined. For extended TRNs, where earlier years were successively added to the TRN, the maximum relationship increased and the predictive ability improved, with the extent of the latter depending on the phenotypic trait and its genotype-by-year interaction. Genomic BLUP outperformed pedigree BLUP and better utilized the early years' data, especially for prediction of hybrids from factorials in a more distant future. This study on hybrid prediction in grain maize illustrated that including historical phenotypic data for training, although consisting of less related genotypes, can improve genomic prediction and enables optimization of hybrid variety development.

Evaluation of Linkage Disequilibrium, Effective Population Size and Haplotype Block Structure in Chinese Cattle

Simple Summary

Evaluation of the population structure and linkage disequilibrium can offer important insights to fully understand the genetic diversity and population history of cattle, which can enable us to appropriately design and implement GWAS and GS in cattle. In this study, we characterized the extent of genome-wide LD and the haplotype block structure, and estimated the persistence of phase of Chinese indigenous cattle with Illumina BovineHD BeadChip. According to our study, 58K, 87K, 95K, 52K, and 52K markers would be necessary for SCHC, NCC, SWC, SIM, and WAG, respectively, in the implementation of GWAS and GS and combining a multipopulation with high persistence of phase is feasible for the implication of genomic selection for Chinese beef cattle.

Abstract

Understanding the linkage disequilibrium (LD) across the genome, haplotype structure, and persistence of phase between breeds can enable us to appropriately design and implement the genome-wide association (GWAS) and genomic selection (GS) in beef cattle. We estimated the extent of genome-wide LD, haplotype block structure, and the persistence of phase in 10 Chinese cattle population using high density BovinHD BeadChip. The overall LD measured by r² between adjacent SNPs were 0.60, 0.67, 0.58, 0.73, and 0.71 for South Chinese cattle (SCHC), North Chinese cattle (NCC), Southwest Chinese cattle (SWC), Simmental (SIM), and Wagyu (WAG). The highest correlation (0.53) for persistence of phase across groups was observed for SCHC vs. SWC at distances of 0–50 kb, while the lowest correlation was 0.13 for SIM vs. SCHC at the same distances. In addition, the estimated current effective population sizes were 27, 14, 31, 34, and 43 for SCHC, NCC, SWC, SIM, and WAG, respectively. Our result showed that 58K, 87K, 95K, 52K, and 52K markers were required for implementation of GWAS and GS in SCHC, NCC, SWC, SIM, and WAG, respectively. Also, our findings suggested that the implication of genomic selection for multipopulation with high persistence of phase is feasible for Chinese cattle.

Evaluation of GBLUP, BayesB and elastic net for genomic prediction in Chinese Simmental beef cattle

Chinese Simmental beef cattle are the most economically important cattle breed in China. Estimated breeding values for growth, carcass, and meat quality traits are commonly used as selection criteria in animal breeding. The objective of this study was to evaluate the accuracy of alternative statistical methods for the estimation of genomic breeding values. Analyses of the accuracy of genomic best linear unbiased prediction (GBLUP), BayesB, and elastic net (EN) were performed with an Illumina BovineHD BeadChip on 1,217 animals by applying 5-fold cross-validation. Overall, the accuracies ranged from 0.17 to 0.296 for ten traits, and the heritability estimates ranged from 0.36 to 0.63. The EN (alpha = 0.001) model provided the most accurate prediction, which was also slightly higher (0.2–2%) than that of GBLUP for most traits, such as average daily weight gain (ADG) and carcass weight (CW). BayesB was less accurate for each trait than were EN (alpha = 0.001) and GBLUP. These findings indicate the importance of using an appropriate variable selection method for the genomic selection of traits and suggest the influence of the genetic architecture of the traits we analyzed.

Design of training populations for selective phenotyping in genomic prediction

Phenotyping is the current bottleneck in plant breeding, especially because next-generation sequencing has decreased genotyping cost more than 100.000 fold in the last 20 years. Therefore, the cost of phenotyping needs to be optimized within a breeding program. When designing the implementation of genomic selection scheme into the breeding cycle, breeders need to select the optimal method for (1) selecting training populations that maximize genomic prediction accuracy and (2) to reduce the cost of phenotyping while improving precision. In this article, we compared methods for selecting training populations under two scenarios: Firstly, when the objective is to select a training population set (TRS) to predict the remaining individuals from the same population (Untargeted), and secondly, when a test set (TS) is first defined and genotyped, and then the TRS is optimized specifically around the TS (Targeted). Our results show that optimization methods that include information from the test set (targeted) showed the highest accuracies, indicating that apriori information from the TS improves genomic predictions. In addition, predictive ability enhanced especially when population size was small which is a target to decrease phenotypic cost within breeding programs.

Genomic Selection and Use of Molecular Tools in Breeding Programs for Indigenous and Crossbred Cattle in Developing Countries: Current Status and Future Prospects

Genomic selection (GS) has resulted in rapid rates of genetic gains especially in dairy cattle in developed countries resulting in a higher proportion of genomically proven young bulls being used in breeding. This success has been undergirded by well-established conventional genetic evaluation systems. Here, the status of GS in terms of the structure of the reference and validation populations, response variables, genomic prediction models, validation methods, and imputation efficiency in breeding programs of developing countries, where smallholder systems predominate and the basic components for conventional breeding are mostly lacking is examined. Also, the application of genomic tools and identification of genome-wide signatures of selection is reviewed. The studies on genomic prediction in developing countries are mostly in dairy and beef cattle usually with small reference populations (500-3,000 animals) and are mostly cows. The input variables tended to be pre-corrected phenotypic records and the small reference populations has made implementation of various Bayesian methods feasible in addition to GBLUP. Multi-trait single-step has been used to incorporate genomic information from foreign bulls, thus GS in developing countries would benefit from collaborations with developed countries, as many dairy sires used are from developed countries where they may have been genotyped and phenotyped. Cross validation approaches have been implemented in most studies resulting in accuracies of 0.20-0.60. Genotyping animals with a mixture of HD and LD chips, followed by imputation to the HD have been implemented with imputation accuracies of 0.74-0.99 reported. This increases the prospects of reducing genotyping costs and hence the cost-effectiveness of GS. Next-generation sequencing and associated technologies have allowed the determination of breed composition, parent verification, genome diversity, and genome-wide selection sweeps. This information can be incorporated into breeding programs aiming to utilize GS. Cost-effective GS in beef cattle in developing countries may involve usage of reproductive technologies (AI and in-vitro fertilization) to efficiently propagate superior genetics from the genomics pipeline. For dairy cattle, sexed semen of genomically proven young bulls could substantially improve profitability thus increase prospects of small holder farmers buying-in into genomic breeding programs.

Genomic prediction using different estimation methodology, blending and cross-validation techniques for growth traits and visual scores in Hereford and Braford cattle

The objective of the present study was to evaluate the accuracy and bias of direct and blended genomic predictions using different methods and cross-validation techniques for growth traits (weight and weight gains) and visual scores (conformation, precocity, muscling, and size) obtained at weaning and at yearling in Hereford and Braford breeds. Phenotypic data contained 126,290 animals belonging to the Delta G Connection genetic improvement program, and a set of 3,545 animals genotyped with the 50K chip and 131 sires with the 777K. After quality control, 41,045 markers remained for all animals. An animal model was used to estimate (co)variance components and to predict breeding values, which were later used to calculate the deregressed estimated breeding values (DEBV). Animals with genotype and phenotype for the traits studied were divided into 4 or 5 groups by random and k-means clustering cross-validation strategies. The values of accuracy of the direct genomic values (DGV) were moderate to high magnitude for at weaning and at yearling traits, ranging from 0.19 to 0.45 for the k-means and 0.23 to 0.78 for random clustering among all traits. The greatest gain in relation to the pedigree BLUP (PBLUP) was 9.5% with the BayesB method with both the k-means and the random clustering. Blended genomic value accuracies ranged from 0.19 to 0.56 for k-means and from 0.21 to 0.82 for random clustering. The analyses using the historical pedigree and phenotypes contributed additional information to calculate the GEBV, and in general, the largest gains were for the single-step (ssGBLUP) method in bivariate analyses with a mean increase of 43.00% among all traits measured at weaning and of 46.27% for those evaluated at yearling. The accuracy values for the marker effects estimation methods were lower for k-means clustering, indicating that the training set relationship to the selection candidates is a major factor affecting accuracy of genomic predictions. The gains in accuracy obtained with genomic blending methods, mainly ssGBLUP in bivariate analyses, indicate that genomic predictions should be used as a tool to improve genetic gains in relation to the traditional PBLUP selection.

Genome-wide association scan for heterotic quantitative trait loci in multi-breed and crossbred beef cattle

BACKGROUND

Heterosis has been suggested to be caused by dominance effects. We performed a joint genome-wide association analysis (GWAS) using data from multi-breed and crossbred beef cattle to identify single nucleotide polymorphisms (SNPs) with significant dominance effects associated with variation in growth and carcass traits and to understand the mode of action of these associations.

METHODS

Illumina BovineSNP50 genotypes and phenotypes for 11 growth and carcass traits were available for 6796 multi-breed and crossbred beef cattle. After performing quality control, 42,610 SNPs and 6794 animals were used for further analyses. A single-SNP GWAS for the joint association of additive and dominance effects was conducted in purebred, crossbred, and combined datasets using the ASReml software. Genomic breed composition predicted from admixture analyses was included in the mixed effect model to account for possible population stratification and breed effects. A threshold of 10% genome-wide false discovery rate was applied to declare associations as significant. The significant SNPs with dominance association were mapped to their corresponding genes at 100 kb.

RESULTS

Seven SNPs with significant dominance associations were detected for birth weight, weaning weight, pre-weaning daily gain, yearling weight and marbling score across the three datasets at a false discovery rate of 10%. These SNPs were located on bovine chromosomes 1, 3, 4, 6 and 21 and mapped to six putative candidate genes: U6atac, AGBL4, bta-mir-2888-1, REPIN1, ICA1 and NXPH1. These genes have interesting biological functions related to the regulation of gene expression, glucose and lipid metabolism and body fat mass. For most of the identified loci, we observed over-dominance association with the studied traits, such that the heterozygous individuals at any of these loci had greater genotypic values for the trait than either of the homozygous individuals.

CONCLUSIONS

Our results revealed very few regions with significant dominance genetic effects across all the traits studied in the three datasets used. Regarding the SNPs that were detected with dominance associations, further investigation is needed to determine their relevance in crossbreeding programs assuming that dominance effects are the main cause of (or contribute usefully to) heterosis.