Association, effects and validation of polymorphisms within the NCAPG - LCORL locus located on BTA6 with feed intake, gain, meat and carcass traits in beef cattle

An association weight matrix identified biological pathways associated with bull fertility traits in a multi-breed population

Using seven indicator traits, we investigated the genetic basis of bull fertility and predicted gene interactions from SNP associations. We used percent normal sperm as the key phenotype for the association weight matrix-partial correlation information theory (AWM-PCIT) approach. Beyond a simple list of candidate genes, AWM-PCIT predicts significant gene interactions and associations for the selected traits. These interactions formed a network of 537 genes: 38 genes were transcription cofactors, and 41 genes were transcription factors. The network displayed two distinct clusters, one with 294 genes and another with 243 genes. The network is enriched in fertility-associated pathways: steroid biosynthesis, p53 signalling, and the pentose phosphate pathway. Enrichment analysis also highlighted gene ontology terms associated with 'regulation of neurotransmitter secretion' and 'chromatin formation'. Our network recapitulates some genes previously implicated in another network built with lower-density genotypes. Sequence-level data also highlights additional candidate genes relevant to bull fertility, such as FOXO4, FOXP3, GATA1, CYP27B1, and EBP. A trio of regulatory genes-KDM5C, LRRK2, and PME-was deemed core to the network because of their overarching connections. This trio probably influences bull fertility through their interaction with genes, both known and unknown as to their role in male fertility. Future studies may target the trio and their target genes to enrich our understanding of male fertility further.

Transcriptional Signatures of Domestication Revealed through Meta-Analysis of Pig, Chicken, Wild Boar, and Red Junglefowl Gene Expression Data

Domesticated animals have undergone significant changes in their behavior, morphology, and physiological functions during domestication. To identify the changes in gene expression associated with domestication, we collected the RNA-seq data of pigs, chickens, wild boars, and red junglefowl from public databases and performed a meta-analysis. Gene expression was quantified, and the expression ratio between domesticated animals and their wild ancestors (DW-ratio) was calculated. Genes were classified as "upregulated", "downregulated", or "unchanged" based on their DW-ratio, and the DW-score was calculated for each gene. Gene set enrichment analysis revealed that genes upregulated in pigs were related to defense from viral infection, whereas those upregulated in chickens were associated with aminoglycan and carbohydrate derivative catabolic processes. Genes commonly upregulated in pigs and chickens are involved in the immune response, olfactory learning, epigenetic regulation, cell division, and extracellular matrix. In contrast, genes upregulated in wild boar and red junglefowl are related to stress response, cell proliferation, cardiovascular function, neural regulation, and energy metabolism. These findings provide valuable insights into the genetic basis of the domestication process and highlight potential candidate genes for breeding applications.

Integration of selective sweeps across the sheep genome: understanding the relationship between production and adaptation traits

BACKGROUND

Livestock populations are under constant selective pressure for higher productivity levels for different selective purposes. This pressure results in the selection of animals with unique adaptive and production traits. The study of genomic regions associated with these unique characteristics has the potential to improve biological knowledge regarding the adaptive process and how it is connected to production levels and resilience, which is the ability of an animal to adapt to stress or an imbalance in homeostasis. Sheep is a species that has been subjected to several natural and artificial selective pressures during its history, resulting in a highly specialized species for production and adaptation to challenging environments. Here, the data from multiple studies that aim at mapping selective sweeps across the sheep genome associated with production and adaptation traits were integrated to identify confirmed selective sweeps (CSS).

RESULTS

In total, 37 studies were used to identify 518 CSS across the sheep genome, which were classified as production (147 prodCSS) and adaptation (219 adapCSS) CSS based on the frequency of each type of associated study. The genes within the CSS were associated with relevant biological processes for adaptation and production. For example, for adapCSS, the associated genes were related to the control of seasonality, circadian rhythm, and thermoregulation. On the other hand, genes associated with prodCSS were related to the control of feeding behaviour, reproduction, and cellular differentiation. In addition, genes harbouring both prodCSS and adapCSS showed an interesting association with lipid metabolism, suggesting a potential role of this process in the regulation of pleiotropic effects between these classes of traits.

CONCLUSIONS

The findings of this study contribute to a deeper understanding of the genetic link between productivity and adaptability in sheep breeds. This information may provide insights into the genetic mechanisms that underlie undesirable genetic correlations between these two groups of traits and pave the way for a better understanding of resilience as a positive ability to respond to environmental stressors, where the negative effects on production level are minimized.

Genetic legacy and adaptive signatures: investigating the history, diversity, and selection signatures in Rendena cattle resilient to eighteenth century rinderpest epidemics

BACKGROUND

Rendena is a dual-purpose cattle breed, which is primarily found in the Italian Alps and the eastern areas of the Po valley, and recognized for its longevity, fertility, disease resistance and adaptability to steep Alpine pastures. It is categorized as 'vulnerable to extinction' with only 6057 registered animals in 2022, yet no comprehensive analyses of its molecular diversity have been performed to date. The aim of this study was to analyse the origin, genetic diversity, and genomic signatures of selection in Rendena cattle using data from samples collected in 2000 and 2018, and shed light on the breed's evolution and conservation needs.

RESULTS

Genetic analysis revealed that the Rendena breed shares genetic components with various Alpine and Po valley breeds, with a marked genetic proximity to the Original Braunvieh breed, reflecting historical restocking efforts across the region. The breed shows signatures of selection related to both milk and meat production, environmental adaptation and immune response, the latter being possibly the result of multiple rinderpest epidemics that swept across the Alps in the eighteenth century. An analysis of the Rendena cattle population spanning 18 years showed an increase in the mean level of inbreeding over time, which is confirmed by the mean number of runs of homozygosity per individual, which was larger in the 2018 sample.

CONCLUSIONS

The Rendena breed, while sharing a common origin with Brown Swiss, has developed distinct traits that enable it to thrive in the Alpine environment and make it highly valued by local farmers. Preserving these adaptive features is essential, not only for maintaining genetic diversity and enhancing the ability of this traditional animal husbandry to adapt to changing environments, but also for guaranteeing the resilience and sustainability of both this livestock system and the livelihoods within the Rendena valley.

Investigation of cosmopolitan and local Italian beef cattle breeds uncover common patterns of heterozygosity

The analysis of livestock heterozygosity is less common compared to the study of homozygous patterns. Heterozygous-Rich Regions (HRRs) may harbor significant loci for functional traits such as immune response, survival rate, and fertility. For this reason, this study was conducted to investigate and characterize the heterozygosity patterns of four beef cattle breeds, which included two cosmopolitan breeds (Limousine and Charolaise) and two local breeds (Sarda and Sardo Bruna). Our analysis identified regions with a high degree of heterozygosity using a consecutive runs approach, the Tajima D test, nucleotide diversity estimation, and Hardy Weinberg equilibrium test. These regions exhibited recurrent heterozygosity peaks and were consistently found on specific chromosomes across all breeds, specifically autosomes 15, 16, 20, and 23. The cosmopolitan and Sardo Bruna breeds also displayed peaks on autosomes 2 and 21, respectively. Thirty-five top runs shared by more than 25% of the populations were identified. These genomic fragments encompassed 18 genes, two of which are directly linked to male fertility, while four are associated with lactation. Two other genes play roles in survival and immune response. Our study also detected a region related to growth and carcass traits in Limousine breed. Our analysis of heterozygosity-rich regions revealed particular segments of the cattle genome linked to various functional traits. It appears that balancing selection is occurring in specific regions within the four examined breeds, and unexpectedly, they are common across cosmopolitan and local breeds. The genes identified hold potential for applications in breeding programs and conservation studies to investigate the phenotypes associated with these heterozygous genotypes. In addition, Tajima D test, Nucleotide diversity, and Hardy Weinberg equilibrium test confirmed the presence of heterozygous fragments found with Heterozygous-Rich Regions analysis.

Defining a Haplotype Encompassing the LCORL-NCAPG Locus Associated with Increased Lean Growth in Beef Cattle

Numerous studies have shown genetic variation at the LCORL-NCAPG locus is strongly associated with growth traits in beef cattle. However, a causative molecular variant has yet to be identified. To define all possible candidate variants, 34 Charolais-sired calves were whole-genome sequenced, including 17 homozygous for a long-range haplotype associated with increased growth (QQ) and 17 homozygous for potential ancestral haplotypes for this region (qq). The Q haplotype was refined to an 814 kb region between chr6:37,199,897-38,014,080 and contained 218 variants not found in qq individuals. These variants include an insertion in an intron of NCAPG, a previously documented mutation in NCAPG (rs109570900), two coding sequence mutations in LCORL (rs109696064 and rs384548488), and 15 variants located within ATAC peaks that were predicted to affect transcription factor binding. Notably, rs384548488 is a frameshift variant likely resulting in loss of function for long isoforms of LCORL. To test the association of the coding sequence variants of LCORL with phenotype, 405 cattle from five populations were genotyped. The two variants were in complete linkage disequilibrium. Statistical analysis of the three populations that contained QQ animals revealed significant (p < 0.05) associations with genotype and birth weight, live weight, carcass weight, hip height, and average daily gain. These findings affirm the link between this locus and growth in beef cattle and describe DNA variants that define the haplotype. However, further studies will be required to define the true causative mutation.

Genomic Selection for Live Weight in the 14th Month in Alpine Merino Sheep Combining GWAS Information

Alpine Merino Sheep is a novel breed reared from Australian Merino Sheep as the father and Gansu Alpine Fine-Wool Sheep as the mother, living all year in cold and arid alpine areas with exceptional wool quality and meat performance. Body weight is an important economic trait of the Alpine Merino Sheep, but there is limited research on identifying the genes associated with live weight in the 14th month for improving the accuracy of the genomic prediction of this trait. Therefore, this study's sample comprised 1310 Alpine Merino Sheep ewes, and the Fine Wool Sheep 50K Panel was used for genome-wide association study (GWAS) analysis to identify candidate genes. Moreover, the trial population (1310 ewes) in this study was randomly divided into two groups. One group was used as the population for GWAS analysis and screened for the most significant top 5%, top 10%, top 15%, and top 20% SNPs to obtain prior marker information. The other group was used to estimate the genetic parameters based on the weight assigned by heritability combined with different prior marker information. The aim of this study was to compare the accuracy of genomic breeding value estimation when combined with prior marker information from GWAS analysis with the optimal linear unbiased prediction method for genome selection (GBLUP) for the breeding value of target traits. Finally, the accuracy was evaluated using the five-fold cross-validation method. This research provides theoretical and technical support to improve the accuracy of sheep genome selection and better guide breeding. The results demonstrated that eight candidate genes were associated with GWAS analysis, and the gene function query and literature search results suggested that FAM184B, NCAPG, MACF1, ANKRD44, DCAF16, FUK, LCORL, and SYN3 were candidate genes affecting live weight in the 14th month (WT), which regulated the growth of muscle and bone in sheep. In genome selection analysis, the heritability of GBLUP to calculate the WT was 0.335-0.374, the accuracy after five-fold cross-verification was 0.154-0.190, and after assigning different weights to the top 5%, top 10%, top 15%, and top 20% of the GWAS results in accordance with previous information to construct the G matrix, the accuracy of the WT in the GBLUP model was improved by 2.59-7.79%.

Comparative population genomics analysis uncovers genomic footprints and genes influencing body weight trait in Chinese indigenous chicken

Body weight of chicken is a typical quantitative trait, which shows phenotypic variations due to selective breeding. Despite some QTL loci have been obtained, the body weight of native chicken breeds in different geographic regions varies greatly, its genetic basis remains unresolved questions. To address this issue, we analyzed 117 Chinese indigenous chickens from 10 breeds (Huiyang Bearded, Xinhua, Hotan Black, Baicheng You, Liyang, Yunyang Da, Jining Bairi, Lindian, Beijing You, Tibetan). We applied fixation index (FST) analysis to find selected genomic regions and genes associated with body weight traits. Our study suggests that NELL1, XYLT1, and NCAPG/LCORL genes are strongly selected in the body weight trait of Chinese indigenous chicken breeds. In addition, the IL1RAPL1 gene was strongly selected in large body weight chickens, while the PCDH17 and CADM2 genes were strongly selected in small body weight chickens. This result suggests that the patterns of genetic variation of native chicken and commercial chicken, and/or distinct local chicken breeds may follow different evolutionary mechanisms.

Sequence-based GWAS meta-analyses for beef production traits

BACKGROUND

Combining the results of within-population genome-wide association studies (GWAS) based on whole-genome sequences into a single meta-analysis (MA) is an accurate and powerful method for identifying variants associated with complex traits. As part of the H2020 BovReg project, we performed sequence-level MA for beef production traits. Five partners from France, Switzerland, Germany, and Canada contributed summary statistics from sequence-based GWAS conducted with 54,782 animals from 15 purebred or crossbred populations. We combined the summary statistics for four growth, nine morphology, and 15 carcass traits into 16 MA, using both fixed effects and z-score methods.

RESULTS

The fixed-effects method was generally more informative to provide indication on potentially causal variants, although we combined substantially different traits in each MA. In comparison with within-population GWAS, this approach highlighted (i) a larger number of quantitative trait loci (QTL), (ii) QTL more frequently located in genomic regions known for their effects on growth and meat/carcass traits, (iii) a smaller number of genomic variants within the QTL, and (iv) candidate variants that were more frequently located in genes. MA pinpointed variants in genes, including MSTN, LCORL, and PLAG1 that have been previously associated with morphology and carcass traits. We also identified dozens of other variants located in genes associated with growth and carcass traits, or with a function that may be related to meat production (e.g., HS6ST1, HERC2, WDR75, COL3A1, SLIT2, MED28, and ANKAR). Some of these variants overlapped with expression or splicing QTL reported in the cattle Genotype-Tissue Expression atlas (CattleGTEx) and could therefore regulate gene expression.

CONCLUSIONS

By identifying candidate genes and potential causal variants associated with beef production traits in cattle, MA demonstrates great potential for investigating the biological mechanisms underlying these traits. As a complement to within-population GWAS, this approach can provide deeper insights into the genetic architecture of complex traits in beef cattle.

Genome-wide association study for primal cut lean traits in Canadian beef cattle

This study identified genomic variants and underlying candidate genes related to the whole carcass and individual primal cut lean content in Canadian commercial crossbred beef cattle. Genotyping information of 1035 crossbred beef cattle were available alongside estimated and actual carcass lean meat yield and individual primal cut lean content in all carcasses. Significant fixed effects and covariates were identified and included in the animal model. Genome-wide association analysis were implemented using the weighted single-step genomic best linear unbiased prediction (WssGBLUP). A number of candidate genes identified linked to lean tissue production were unrelated to estimated lean meat yield and were specific to the actual lean traits. Among these, 41 genes were common for actual lean traits, on specific regions of BTA4, BTA13 and BTA25 indicating potential involvement in lean mass synthesis. Therefore, the results suggested the inclusion of primal cut lean traits as a selection objective in breeding programs with consideration of further functional studies of the identified genes could help in optimizing lean yield for maximal carcass value.

Identification of Missense Variants Affecting Carcass Traits for Hanwoo Precision Breeding

This study aimed to identify causal variants associated with important carcass traits such as weight and meat quality in Hanwoo cattle. We analyzed missense mutations extracted from imputed sequence data (ARS-UCD1.2) and performed an exon-specific association test on the carcass traits of 16,970 commercial Hanwoo. We found 33, 2, 1, and 3 significant SNPs associated with carcass weight (CW), backfat thickness (BFT), eye muscle area (EMA), and marbling score (MS), respectively. In CW and EMA, the most significant missense SNP was identified at 19,524,263 on BTA14 and involved the PRKDC. A missense SNP in the ZFAND2B, located at 107,160,304 on BTA2 was identified as being involved in BFT. For MS, missense SNP in the ACVR2B gene, located at 11,849,704 in BTA22 was identified as the most significant marker. The contribution of the most significant missense SNPs to genetic variance was confirmed to be 8.47%, 2.08%, 1.73%, and 1.19% in CW, BFT, EMA, and MS, respectively. We generated favorable and unfavorable haplotype combinations based on the significant SNPs for CW. Significant differences in GEBV (Genomic Estimated Breeding Values) were observed between groups with each favorable and unfavorable haplotype combination. In particular, the missense SNPs in PRKDC, MRPL9, and ANKFN1 appear to significantly affect the protein's function and structure, making them strong candidates as causal mutations. These missense SNPs have the potential to serve as valuable markers for improving carcass traits in Hanwoo commercial farms.

Height-Related Polygenic Variants Are Associated with Metabolic Syndrome Risk and Interact with Energy Intake and a Rice-Main Diet to Influence Height in KoGES

Adult height is inversely related to metabolic syndrome (MetS) risk, but its genetic impacts have not been revealed. The present study aimed to examine the hypothesis that adult height-related genetic variants interact with lifestyle to influence adult height and are associated with MetS risk in adults aged >40 in Korea during 2010–2014. Participants were divided into short stature (SS; control) and tall stature (TS; case) by the 85th percentile of adult height. The genetic variants linked to adult height were screened from a genome-wide association study in a city hospital-based cohort (n = 58,701) and confirmed in Ansan/Ansung plus rural cohorts (n = 13,783) among the Korean Genome and Epidemiology Study. Genetic variants that interacted with each other were identified using the generalized multifactor dimensionality reduction (GMDR) analysis. The interaction between the polygenic risk score (PRS) of the selected genetic variants and lifestyles was examined. Adult height was inversely associated with MetS, cardiovascular diseases, and liver function. The PRS, including zinc finger and BTB domain containing 38 (ZBTB38)_rs6762722, polyadenylate-binding protein-interacting protein-2B (PAIP2B)_rs13034890, carboxypeptidase Z (CPZ)_rs3756173, and latent-transforming growth factor beta-binding protein-1 (LTBP1)_rs4630744, was positively associated with height by 1.29 times and inversely with MetS by 0.894 times after adjusting for covariates. In expression quantitative trait loci, the gene expression of growth/differentiation factor-5 (GDF5)_rs224331, non-SMC condensin I complex subunit G (NCAPG)_rs2074974, ligand-dependent nuclear receptor corepressor like (LCORL)_rs7700107, and insulin-like growth factor-1 receptor (IGF1R)_rs2871865 was inversely linked to their risk allele in the tibial nerve and brain. The gene expression of PAIP2B_rs13034890 and a disintegrin and metalloproteinase with thrombospondin motifs-like-3 (ADAMTSL3)_rs13034890 was positively related to it. The PRS was inversely associated with MetS, hyperglycemia, HbA1c, and white blood cell counts. The wild type of GDF5_rs224331 (Ala276) lowered binding energy with rugosin A, D, and E (one of the hydrolyzable tannins) but not the mutated one (276Ser) in the in-silico analysis. The PRS interacted with energy intake and rice-main diet; PRS impact was higher in the high energy intake and the low rice-main diet. In conclusion, the PRS for adult height interacted with energy intake and diet patterns to modulate height and was linked to height and MetS by modulating their expression in the tibial nerve and brain.

Exploring and Identifying Candidate Genes and Genomic Regions Related to Economically Important Traits in Hanwoo Cattle

The purpose of the current review was to explore and summarize different studies concerning the detection and characterization of candidate genes and genomic regions associated with economically important traits in Hanwoo beef cattle. Hanwoo cattle, the indigenous premium beef cattle of Korea, were introduced for their marbled fat, tenderness, characteristic flavor, and juiciness. To date, there has been a strong emphasis on the genetic improvement of meat quality and yields, such as backfat thickness (BFT), marbling score (MS), carcass weight (CW), eye muscle area (EMA), and yearling weight (YW), as major selection criteria in Hanwoo breeding programs. Hence, an understanding of the genetics controlling these traits along with precise knowledge of the biological mechanisms underlying the traits would increase the ability of the industry to improve cattle to better meet consumer demands. With the development of high-throughput genotyping, genomewide association studies (GWAS) have allowed the detection of chromosomal regions and candidate genes linked to phenotypes of interest. This is an effective and useful tool for accelerating the efficiency of animal breeding and selection. The GWAS results obtained from the literature review showed that most positional genes associated with carcass and growth traits in Hanwoo are located on chromosomes 6 and 14, among which LCORL, NCAPG, PPARGC1A, ABCG2, FAM110B, FABP4, DGAT1, PLAG1, and TOX are well known. In conclusion, this review study attempted to provide comprehensive information on the identified candidate genes associated with the studied traits and genes enriched in the functional terms and pathways that could serve as a valuable resource for future research in Hanwoo breeding programs.

Genomic Tools for the Characterization of Local Animal Genetic Resources: Application in Mascaruna Goat

Italy contains a large number of local goat populations, some of which do not have a recognized genetic structure. The "Mascaruna" is a goat population reared for milk production in Sicily. In this study, a total of 72 individuals were genotyped with the Illumina Goat_IGGC_65K_v2 BeadChip with the aim to characterize the genetic diversity, population structure and relatedness with another 31 Italian goat populations. The results displayed a moderate level of genetic variability for Mascaruna, in concordance with the estimated values for Italian goats. Runs of homozygosity islands are linked to genes involved in milk production, immune response and local adaptation. Population structure analyses separated Mascaruna from the other goat populations, indicating a clear genetic differentiation. Although they are not conclusive, our current results represent a starting point for the creation of monitoring and conservation plans. Additional analyses and a wider sampling would contribute to refine and validate these results. Finally, our study describing the diversity and structure of Mascaruna confirms the usefulness of applied genomic analyses as valid tools for the study of the local uncharacterized genetic resources.

A Novel A > G Polymorphism in the Intron 1 of LCORL Gene Is Significantly Associated with Hide Weight and Body Size in Dezhou Donkey

Several studies have shown the association between the ligand-dependent nuclear receptor compression-like protein (LCORL) gene and body size in horses, pigs and donkeys. Based on previous studies, the LCORL gene was hypothesized to be associated with growth traits and hide weight in Dezhou donkeys. In this study, we aimed to reveal the variation of the LCORL gene in the Dezhou donkey and explore whether the gene is associated with hide weight and body size. In this study, genetic polymorphisms in the LCORL gene of the Dezhou donkey were studied using targeted sequencing technology, and single nucleotide polymorphisms (SNPs) of the LCORL gene were analyzed for association with hide weight and body size in Dezhou donkeys. The results showed that there was an SNP locus situated in intron 1 of the LCORL gene. Association analysis revealed that individuals with the GG genotype had significantly higher body height, body length, chest circumference and hide weight than those with the AA genotype (p < 0.05). Therefore, the g.112558859 A > G locus can be used as a potential candidate marker affecting body size and hide weight. This study provides the foundation for breeding high-quality donkeys with high hide yield.

Whole genome resequencing reveals the genetic contribution of Kazakh and Swiss Brown cattle to a population of Xinjiang Brown cattle

Xinjiang Brown cattle is characterized by wide environmental adaptation from its female parent (Kazakh cattle) and good production performance from its male parent (Swiss Brown cattle). However, the genetic basis underlying these characteristics hasnotbeenexplored. Here we compared 50 genomes of Xinjiang Brown cattle to the genomes of other eight breeds worldwide to analyze patterns of genetic variation in the Xinjiang Brown cattle. We found canonical genomic characteristics of cross breed with the lowest linkage disequilibrium and the highest effective population size. At the global level, Xinjiang Brown cattle had 9.88% Kazakh cattle and 90.12% Swiss Brown cattle inheritance. Our local ancestry inference revealed the segments with the excess of Kazakh cattle blood enriched in genes or pathways involved in digestion,absorption,metabolism and disease. More importantly, we also observed the completely fixed haplotypes inherited from Swiss Brown cattle harboring genes (LCORL, GHR, MEF2D, PCSK1 and MSRB3), KEGG pathways, cattle QTLs or human NHGRIGWAS catalog related to body measurement and growth traits. Our findings will not only help understand the process of cross breeding but can provide basic materials for further QTL mapping and improvement of important traits in Xinjiang Brown cattle.

Along the Bos taurus genome, uncover candidate imprinting control regions

Background

In mammals, Imprinting Control Regions (ICRs) regulate a subset of genes in a parent-of-origin-specific manner. In both human and mouse, previous studies identified a set of CpG-rich motifs occurring as clusters in ICRs and germline Differentially Methylated Regions (gDMRs). These motifs consist of the ZFP57 binding site (ZFBS) overlapping a subset of MLL binding units known as MLL morphemes. MLL or MLL1 (Mixed Lineage Leukemia 1) is a relatively large multidomain protein that plays a central role in the regulation of transcription. The structures of both MLL1 and MLL2 include a domain (MT) that binds CpG-rich DNA and a conserved domain (SET) that methylates lysine 4 in histone H3 producing H3K4me3 marks in chromatin.

Results

Since genomic imprinting impacts many developmental and key physiological processes, we followed a previous bioinformatics strategy to pinpoint ICR positions in the Bos taurus genome. Initial genome-wide analyses involved finding the positions of ZFP57 binding sites, and the CpG-rich motifs (ZFBS-morph overlaps) along cattle chromosomal DNA. By creating plots displaying the density of ZFBS-morph overlaps, we removed background noise and thus improved signal detection. With the density-plots, we could view the positions of peaks locating known and candidate ICRs in cattle DNA. Our evaluations revealed the correspondence of peaks in plots to reported known and inferred ICRs/DMRs in cattle. Beside peaks pinpointing such ICRs, the density-plots also revealed additional peaks. Since evaluations validated the robustness of our approach, we inferred that the additional peaks may correspond to candidate ICRs for imprinted gene expression.

Conclusion

Our bioinformatics strategy offers the first genome-wide approach for systematically localizing candidate ICRs. Furthermore, we have tailored our datasets for upload onto the UCSC genome browser so that researchers could find known and candidate ICRs with respect to a wide variety of annotations at all scales: from the positions of Single Nucleotide Polymorphisms (SNPs), to positions of genes, transcripts, and repeated DNA elements. Furthermore, the UCSC genome browser offers tools to produce enlarged views: to uncover the genes in the vicinity of candidate ICRs and thus discover potential imprinted genes for experimental validations.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-022-08694-3.

Genome-wide association study for meat tenderness in beef cattle identifies patterns of the genetic contribution in different post-mortem stages

The beef tenderization process during the post-mortem period is one of the most important sensorial attributes and it is well-established. The aim of this study was to identify the genetic contribution pattern to meat tenderness at 7-(LMD7), 14-(LMD14), and 21-(LMD21) days post-mortem. The heritabilities for LMD7 (0.194), LMD14 (0.142) and LMD21 (0.048) are well established in the population evaluated here. However, its genetic contribution in terms of genomic candidate regions is still poorly understood. Tenderness was measured in the Longissiums thoracis using Warner-Bratzler shear force in the three post-mortem periods. A total of 4323 crossbred beef cattle were phenotyped and genotyped using the Illumina BovineSNP50K. The percentage of the total genetic variance was estimated using the weighted single-step genomic best linear unbiased prediction method. The main candidate windows for LMD7 were associated with proteolysis of myofibrillar structures and the weakening endomysium and perimysium. Candidate windows for LMD14 and LMD21 were mapped in bovine QTLs for body composition, height and growth. Results presented herein highlight, the largest contribution of proteolysis related processes before 14-days post-mortem and body composition characteristics in later stages for meat tenderness.

Comparative analysis of inbreeding parameters and runs of homozygosity islands in 2 Italian autochthonous cattle breeds mainly raised in the Parmigiano-Reggiano cheese production region

Reggiana and Modenese are autochthonous cattle breeds, reared in the North of Italy, that can be mainly distinguished for their standard coat color (Reggiana is red, whereas Modenese is white with some pale gray shades). Almost all milk produced by these breeds is transformed into 2 mono-breed branded Parmigiano-Reggiano cheeses, from which farmers receive the economic incomes needed for the sustainable conservation of these animal genetic resources. After the setting up of their herd books in 1960s, these breeds experienced a strong reduction in the population size that was subsequently reverted starting in the 1990s (Reggiana) or more recently (Modenese) reaching at present a total of about 2,800 and 500 registered cows, respectively. Due to the small population size of these breeds, inbreeding is a very important cause of concern for their conservation programs. Inbreeding is traditionally estimated using pedigree data, which are summarized in an inbreeding coefficient calculated at the individual level (F_PED). However, incompleteness of pedigree information and registration errors can affect the effectiveness of conservation strategies. High-throughput SNP genotyping platforms allow investigation of inbreeding using genome information that can overcome the limits of pedigree data. Several approaches have been proposed to estimate genomic inbreeding, with the use of runs of homozygosity (ROH) considered to be the more appropriate. In this study, several pedigree and genomic inbreeding parameters, calculated using the whole herd book populations or considering genotyping information (GeneSeek GGP Bovine 150K) from 1,684 Reggiana cattle and 323 Modenese cattle, were compared. Average inbreeding values per year were used to calculate effective population size. Reggiana breed had generally lower genomic inbreeding values than Modenese breed. The low correlation between pedigree-based and genomic-based parameters (ranging from 0.187 to 0.195 and 0.319 to 0.323 in the Reggiana and Modenese breeds, respectively) reflected the common problems of local populations in which pedigree records are not complete. The high proportion of short ROH over the total number of ROH indicates no major recent inbreeding events in both breeds. ROH islands spread over the genome of the 2 breeds (15 in Reggiana and 14 in Modenese) identified several signatures of selection. Some of these included genes affecting milk production traits, stature, body conformation traits (with a main ROH island in both breeds on BTA6 containing the ABCG2, NCAPG, and LCORL genes) and coat color (on BTA13 in Modenese containing the ASIP gene). In conclusion, this work provides an extensive comparative analysis of pedigree and genomic inbreeding parameters and relevant genomic information that will be useful in the conservation strategies of these 2 iconic local cattle breeds.

Identification of Candidate Variants Associated With Bone Weight Using Whole Genome Sequence in Beef Cattle

Bone weight is critical to affect body conformation and stature in cattle. In this study, we conducted a genome-wide association study for bone weight in Chinese Simmental beef cattle based on the imputed sequence variants. We identified 364 variants associated with bone weight, while 350 of them were not included in the Illumina BovineHD SNP array, and several candidate genes and GO terms were captured to be associated with bone weight. Remarkably, we identified four potential variants in a candidate region on BTA6 using Bayesian fine-mapping. Several important candidate genes were captured, including LAP3, MED28, NCAPG, LCORL, SLIT2, and IBSP, which have been previously reported to be associated with carcass traits, body measurements, and growth traits. Notably, we found that the transcription factors related to MED28 and LCORL showed high conservation across multiple species. Our findings provide some valuable information for understanding the genetic basis of body stature in beef cattle.

Genome-wide Association Study for Carcass Primal Cut Yields Using Single-step Bayesian Approach in Hanwoo Cattle

The importance of meat and carcass quality is growing in beef cattle production to meet both producer and consumer demands. Primal cut yields, which reflect the body compositions of carcass, could determine the carcass grade and, consequently, command premium prices. Despite its importance, there have been few genome-wide association studies on these traits. This study aimed to identify genomic regions and putative candidate genes related to 10 primal cut traits, including tenderloin, sirloin, striploin, chuck, brisket, top round, bottom round, shank, flank, and rib in Hanwoo cattle using a single-step Bayesian regression (ssBR) approach. After genomic data quality control, 43,987 SNPs from 3,745 genotyped animals were available, of which 3,467 had phenotypic records for the analyzed traits. A total of 16 significant genomic regions (1-Mb window) were identified, of which five large-effect quantitative trait loci (QTLs) located on chromosomes 6 at 38–39 Mb, 11 at 21–22 Mb, 14 at 6–7 Mb and 26–27 Mb, and 19 at 26–27 Mb were associated with more than one trait, while the remaining 11 QTLs were trait-specific. These significant regions were harbored by 154 genes, among which TOX, FAM184B, SPP1, IBSP, PKD2, SDCBP, PIGY, LCORL, NCAPG, and ABCG2 were noteworthy. Enrichment analysis revealed biological processes and functional terms involved in growth and lipid metabolism, such as growth (GO:0040007), muscle structure development (GO:0061061), skeletal system development (GO:0001501), animal organ development (GO:0048513), lipid metabolic process (GO:0006629), response to lipid (GO:0033993), metabolic pathways (bta01100), focal adhesion (bta04510), ECM–receptor interaction (bta04512), fat digestion and absorption (bta04975), and Rap1 signaling pathway (bta04015) being the most significant for the carcass primal cut traits. Thus, identification of quantitative trait loci regions and plausible candidate genes will aid in a better understanding of the genetic and biological mechanisms regulating carcass primal cut yields.

Assessing the Genetic Background and Selection Signatures of Huaxi Cattle Using High-Density SNP Array

Huaxi cattle, a specialized beef cattle breed in China, has the characteristics of fast growth, high slaughter rate, and net meat rate, good reproductive performance, strong stress resistance, and wide adaptability. In this study, we evaluated the genetic diversity, population structure, and genetic relationships of Huaxi cattle and its ancestor populations at the genome-wide level, as well as detecting the selection signatures of Huaxi cattle. Principal component analysis (PCA) and phylogenetic analysis revealed that Huaxi cattle were obviously separated from other cattle populations. The admixture analysis showed that Huaxi cattle has distinct genetic structures among all populations at K = 4. It can be concluded that Huaxi cattle has formed its own unique genetic features. Using integrated haplotype score (iHS) and composite likelihood ratio (CLR) methods, we identified 143 and 199 potentially selected genes in Huaxi cattle, respectively, among which nine selected genes (KCNK1, PDLIM5, CPXM2, CAPN14, MIR2285D, MYOF, PKDCC, FOXN3, and EHD3) related to ion binding, muscle growth and differentiation, and immunity were detected by both methods. Our study sheds light on the unique genetic feature and phylogenetic relationship of Huaxi cattle, provides a basis for the genetic mechanism analysis of important economic traits, and guides further intensive breeding improvement of Huaxi cattle.

Genome-wide association analyses of carcass traits using copy number variants and raw intensity values of single nucleotide polymorphisms in cattle

BACKGROUND

The carcass value of cattle is a function of carcass weight and quality. Given the economic importance of carcass merit to producers, it is routinely included in beef breeding objectives. A detailed understanding of the genetic variants that contribute to carcass merit is useful to maximize the efficiency of breeding for improved carcass merit. The objectives of the present study were two-fold: firstly, to perform genome-wide association analyses of carcass weight, carcass conformation, and carcass fat using copy number variant (CNV) data in a population of 923 Holstein-Friesian, 945 Charolais, and 974 Limousin bulls; and secondly to perform separate association analyses of carcass traits on the same population of cattle using the Log R ratio (LRR) values of 712,555 single nucleotide polymorphisms (SNPs). The LRR value of a SNP is a measure of the signal intensity of the SNP generated during the genotyping process.

RESULTS

A total of 13,969, 3,954, and 2,805 detected CNVs were tested for association with the three carcass traits for the Holstein-Friesian, Charolais, and Limousin, respectively. The copy number of 16 CNVs and the LRR of 34 SNPs were associated with at least one of the three carcass traits in at least one of the three cattle breeds. With the exception of three SNPs, none of the quantitative trait loci detected in the CNV association analyses or the SNP LRR association analyses were also detected using traditional association analyses based on SNP allele counts. Many of the CNVs and SNPs associated with the carcass traits were located near genes related to the structure and function of the spliceosome and the ribosome; in particular, U6 which encodes a spliceosomal subunit and 5S rRNA which encodes a ribosomal subunit.

CONCLUSIONS

The present study demonstrates that CNV data and SNP LRR data can be used to detect genomic regions associated with carcass traits in cattle providing information on quantitative trait loci over and above those detected using just SNP allele counts, as is the approach typically employed in genome-wide association analyses.

Integrated Environmental and Genomic Analysis Reveals the Drivers of Local Adaptation in African Indigenous Chickens

Breeding for climate resilience is currently an important goal for sustainable livestock production. Local adaptations exhibited by indigenous livestock allow investigating the genetic control of this resilience. Ecological niche modeling (ENM) provides a powerful avenue to identify the main environmental drivers of selection. Here, we applied an integrative approach combining ENM with genome-wide selection signature analyses (XPEHH and Fst) and genotype-environment association (redundancy analysis), with the aim of identifying the genomic signatures of adaptation in African village chickens. By dissecting 34 agro-climatic variables from the ecosystems of 25 Ethiopian village chicken populations, ENM identified six key drivers of environmental challenges: One temperature variable-strongly correlated with elevation, three precipitation variables as proxies for water availability, and two soil/land cover variables as proxies of food availability for foraging chickens. Genome analyses based on whole-genome sequencing (n = 245), identified a few strongly supported genomic regions under selection for environmental challenges related to altitude, temperature, water scarcity, and food availability. These regions harbor several gene clusters including regulatory genes, suggesting a predominantly oligogenic control of environmental adaptation. Few candidate genes detected in relation to heat-stress, indicates likely epigenetic regulation of thermo-tolerance for a domestic species originating from a tropical Asian wild ancestor. These results provide possible explanations for the rapid past adaptation of chickens to diverse African agro-ecologies, while also representing new landmarks for sustainable breeding improvement for climate resilience. We show that the pre-identification of key environmental drivers, followed by genomic investigation, provides a powerful new approach for elucidating adaptation in domestic animals.

A genome-wide association analysis for body weight at 35 days measured on 137,343 broiler chickens

BACKGROUND

Body weight (BW) is an economically important trait in the broiler (meat-type chickens) industry. Under the assumption of polygenicity, a "large" number of genes with "small" effects is expected to control BW. To detect such effects, a large sample size is required in genome-wide association studies (GWAS). Our objective was to conduct a GWAS for BW measured at 35 days of age with a large sample size.

METHODS

The GWAS included 137,343 broilers spanning 15 pedigree generations and 392,295 imputed single nucleotide polymorphisms (SNPs). A false discovery rate of 1% was adopted to account for multiple testing when declaring significant SNPs. A Bayesian ridge regression model was implemented, using AlphaBayes, to estimate the contribution to the total genetic variance of each region harbouring significant SNPs (1 Mb up/downstream) and the combined regions harbouring non-significant SNPs.

RESULTS

GWAS revealed 25 genomic regions harbouring 96 significant SNPs on 13 Gallus gallus autosomes (GGA1 to 4, 8, 10 to 15, 19 and 27), with the strongest associations on GGA4 at 65.67-66.31 Mb (Galgal4 assembly). The association of these regions points to several strong candidate genes including: (i) growth factors (GGA1, 4, 8, 13 and 14); (ii) leptin receptor overlapping transcript (LEPROT)/leptin receptor (LEPR) locus (GGA8), and the STAT3/STAT5B locus (GGA27), in connection with the JAK/STAT signalling pathway; (iii) T-box gene (TBX3/TBX5) on GGA15 and CHST11 (GGA1), which are both related to heart/skeleton development); and (iv) PLAG1 (GGA2). Combined together, these 25 genomic regions explained ~ 30% of the total genetic variance. The region harbouring significant SNPs that explained the largest portion of the total genetic variance (4.37%) was on GGA4 (~ 65.67-66.31 Mb).

CONCLUSIONS

To the best of our knowledge, this is the largest GWAS that has been conducted for BW in chicken to date. In spite of the identified regions, which showed a strong association with BW, the high proportion of genetic variance attributed to regions harbouring non-significant SNPs supports the hypothesis that the genetic architecture of BW35 is polygenic and complex. Our results also suggest that a large sample size will be required for future GWAS of BW35.

Genomic analyses reveal distinct genetic architectures and selective pressures in Chinese donkeys

Donkey (Equus asinus) is an important livestock animal in China because of its draft and medicinal value. After a long period of natural and artificial selection, the variety and phenotype of donkeys have become abundant. We clarified the genetic and demographic characteristics of Chinese domestic donkeys and the selection pressures by analyzing 78 whole genomes from 12 breeds. According to population structure, most Chinese domestic donkeys showed a dominant ancestral type. However, the Chinese donkeys still represented a significant geographical distribution trend. In the selective sweep, gene annotation, functional enrichment, and differential expression analyses between large and small donkey groups, we identified selective signals, including NCAPG and LCORL, which are related to rapid growth and large body size. Our findings elucidate the evolutionary history and formation of different donkey breeds and provide theoretical insights into the genetic mechanism underlying breed characteristics and molecular breeding programs of donkey clades.

Integration of selection signatures and multi-trait GWAS reveals polygenic genetic architecture of carcass traits in beef cattle

Carcass merits are widely considered as economically important traits affecting beef production in the beef cattle industry. However, the genetic basis of carcass traits remains to be well understood. Here, we applied multiple methods, including the Composite of Likelihood Ratio (CLR) and Genome-wide Association Study (GWAS), to explore the selection signatures and candidate variants affecting carcass traits. We identified 11,600 selected regions overlapping with 2214 candidate genes, and most of those were enriched in binding and gene regulation. Notably, we identified 66 and 110 potential variants significantly associated with carcass traits using single-trait and multi-traits analyses, respectively. By integrating selection signatures with single and multi-traits associations, we identified 12 and 27 putative genes, respectively. Several highly conserved missense variants were identified in OR5M13D, NCAPG, and TEX2. Our study supported polygenic genetic architecture of carcass traits and provided novel insights into the genetic basis of complex traits in beef cattle.

Exploiting within-breed variability in the autochthonous Reggiana breed identified several candidate genes affecting pigmentation-related traits, stature and udder defects in cattle

Autochthonous cattle breeds constitute important reservoirs of genetic diversity. Reggiana is an Italian local cattle breed reared in the north of Italy for the production of a mono‐breed Parmigiano–Reggiano cheese. Reggiana cattle usually have a classical solid red coat colour and pale muzzle. As part of the strategies designed for the sustainable conservation of this genetic resource, we investigated at the genome‐wise level the within‐breed detected variability of three pigmentation‐related traits (intensity of red coat colour, based on three classes – light/diluted, normal and dark; spotted patterns/piebaldism that sometime emerge in the breed; muzzle colour – pink/pale, grey and black), stature, presence/absence and number of supernumerary teats and teat length. A total of 1776 Reggiana cattle (about two‐thirds of the extant breed population) were genotyped with the GeneSeek GGP Bovine 150k SNP array and single‐marker and haplotype‐based GWASs were carried out. The results indicated that two main groups of genetic factors affect the intensity of red coat colour: darkening genes (including EDN3 and a few other genes) and diluting genes (including PMEL and a few other genes). Muzzle colour was mainly determined by MC1R gene markers. Piebaldism was mainly associated with KIT gene markers. Stature was associated with BTA6 markers upstream of the NCAPG–LCORL genes. Teat defects were associated with TBX3/TBX5, MCC and LGR5 genes. Overall, the identified genomic regions not only can be directly used in selection plans in the Reggiana breed, but also contribute to clarifying the genetic mechanisms involved in determining exterior traits in cattle.

Detection of Genomic Regions with Pleiotropic Effects for Growth and Carcass Quality Traits in the Rubia Gallega Cattle Breed

Simple Summary

The breeding scheme in the Rubia Gallega cattle population is based upon traits measured in farms and slaughterhouses. We have developed a ssGWAS by backsolving the SNP effects after implementing a ssGBLUP. The results showed an apparent heterogeneity of the additive genetic variance across the genome. Some of the genomic regions explaining the most of this additive variance were shared across traits, indicating the presence of pleiotropic effects, which were reflected in their genetic correlations.

Abstract

The breeding scheme in the Rubia Gallega cattle population is based upon traits measured in farms and slaughterhouses. In recent years, genomic evaluation has been implemented by using a ssGBLUP (single-step Genomic Best Linear Unbiased Prediction). This procedure can reparameterized to perform ssGWAS (single-step Genome Wide Association Studies) by backsolving the SNP (single nucleotide polymorphisms) effects. Therefore, the objective of this study was to identify genomic regions associated with the genetic variability in growth and carcass quality traits. We implemented a ssGBLUP by using a database that included records for Birth Weight (BW-327,350 records-), Weaning Weight (WW-83,818-), Cold Carcass Weight (CCW-91,621-), Fatness (FAT-91,475-) and Conformation (CON-91,609-). The pedigree included 464,373 individuals, 2449 of which were genotyped. After a process of filtering, we ended up using 43,211 SNP markers. We used the GBLUP and SNPBLUP model equivalences to obtain the effects of the SNPs and then calculated the percentage of variance explained by the regions of the genome between 1 Mb. We identified 7 regions of the genome for CCW; 8 regions for BW, WW, FAT and 9 regions for CON, which explained the percentage of variance above 0.5%. Furthermore, a number of the genome regions had pleiotropic effects, located at: BTA1 (131–132 Mb), BTA2 (1–11 Mb), BTA3 (32–33 Mb), BTA6 (36–38 Mb), BTA16 (24–26 Mb), and BTA 21 (56–57 Mb). These regions contain, amongst others, the following candidate genes: NCK1, MSTN, KCNA3, LCORL, NCAPG, and RIN3.

Genome-Wide Patterns of Homozygosity Reveal the Conservation Status in Five Italian Goat Populations

Simple Summary

In the local populations, the increase in inbreeding is a relevant problem for the reduction in production, reproduction, and adaptive traits. The application of genomic technologies has facilitated the assessment of inbreeding in these populations. The current study aims to investigate the patterns of homozygosity in five Italian local goat populations. The results showed the different selection histories and breeding schemes of these goat populations. The analysis also indicated the importance of this information to avoid future loss of diversity and to produce information for designing optimal breeding and conservation programs.

Abstract

The application of genomic technologies has facilitated the assessment of genomic inbreeding based on single nucleotide polymorphisms (SNPs). In this study, we computed several runs of homozygosity (ROH) parameters to investigate the patterns of homozygosity using Illumina Goat SNP50 in five Italian local populations: Argentata dell’Etna (N = 48), Derivata di Siria (N = 32), Girgentana (N = 59), Maltese (N = 16) and Messinese (N = 22). The ROH results showed well-defined differences among the populations. A total of 3687 ROH segments >2 Mb were detected in the whole sample. The Argentata dell’Etna and Messinese were the populations with the lowest mean number of ROH and inbreeding coefficient values, which reflect admixture and gene flow. In the Girgentana, we identified an ROH pattern related with recent inbreeding that can endanger the viability of the breed due to reduced population size. The genomes of Derivata di Siria and Maltese breeds showed the presence of long ROH (>16 Mb) that could seriously impact the overall biological fitness of these breeds. Moreover, the results confirmed that ROH parameters are in agreement with the known demography of these populations and highlighted the different selection histories and breeding schemes of these goat populations. In the analysis of ROH islands, we detected harbored genes involved with important traits, such as for milk yield, reproduction, and immune response, and are consistent with the phenotypic traits of the studied goat populations. Finally, the results of this study can be used for implementing conservation programs for these local populations in order to avoid further loss of genetic diversity and to preserve the production and fitness traits. In view of this, the availability of genomic data is a fundamental resource.

Systems genetic analysis of binge-like eating in a C57BL/6J x DBA/2J-F2 cross

Binge eating is a heritable trait associated with eating disorders and refers to the rapid consumption of a large quantity of energy-dense food that is, associated with loss of control and negative affect. Binge eating disorder is the most common eating disorder in the United States; however, the genetic basis is unknown. We previously identified robust mouse inbred strain differences between C57BL/6J and DBA/2J in binge-like eating of sweetened palatable food in an intermittent access, conditioned place preference paradigm. To map the genetic basis of changes in body weight and binge-like eating (BLE) and to identify candidate genes, we conducted quantitative trait locus (QTL) analysis in 128 C57BL/6J x DBA/2J-F2 mice combined with PheQTL and trait covariance analysis in GeneNetwork2 using legacy BXD-RI trait datasets. We identified a QTL on Chromosome 18 influencing changes in body weight across days in females (log of the odds [LOD] = 6.3; 1.5-LOD: 3-12 cM) that contains the candidate gene Zeb1. We also identified a sex-combined QTL influencing initial palatable food intake on Chromosome 5 (LOD = 5.8; 1.5-LOD: 21-28 cM) that contains the candidate gene Lcorl and a second QTL influencing escalated palatable food intake on Chromosome 6 in males (LOD = 5.4; 1.5-LOD: 50-59 cM) that contains the candidate genes Adipor2 and Plxnd1. Finally, we identified a suggestive QTL in females for slope of BLE on distal Chromosome 18 (LOD = 4.1; p = 0.055; 1.5-LOD: 23-35 cM). Future studies will use BXD-RI strains to fine map loci and support candidate gene nomination for gene editing.

Integrating Genomic and Transcriptomic Data to Reveal Genetic Mechanisms Underlying Piao Chicken Rumpless Trait

Piao chicken, a rare Chinese native poultry breed, lacks primary tail structures, such as pygostyle, caudal vertebra, uropygial gland, and tail feathers. So far, the molecular mechanisms underlying tail absence in this breed remain unclear. In this study, we comprehensively employed comparative transcriptomic and genomic analyses to unravel potential genetic underpinnings of rumplessness in Piao chicken. Our results reveal many biological factors involved in tail development and several genomic regions under strong positive selection in this breed. These regions contain candidate genes associated with rumplessness, including Irx4, Il18, Hspb2, and Cryab. Retrieval of quantitative trait loci (QTL) and gene functions implies that rumplessness might be consciously or unconsciously selected along with the high-yield traits in Piao chicken. We hypothesize that strong selection pressures on regulatory elements might lead to changes in gene activity in mesenchymal stem cells of the tail bud. The ectopic activity could eventually result in tail truncation by impeding differentiation and proliferation of the stem cells. Our study provides fundamental insights into early initiation and genetic basis of the rumpless phenotype in Piao chicken.

Genome-wide association study of economically important traits in Charolais and Limousin beef cows

Genomic selection has proven effective for advancing genetic gain for key profit traits in dairy cattle production systems. However, its impact to-date on genetic improvement programs for beef cattle has been less effective. Despite this, the technology is thought to be particularly useful for low heritability traits such as those associated with reproductive efficiency. The objective of this study was to identify genetic variants associated with key determinants of reproductive and overall productive efficiency in beef cows. The analysis employed a large dataset derived from the national genetic evaluation program in Ireland for two of the most predominant beef breeds, viz. Charolais (n = 5 244 cows) and Limousin (n = 7 304 cows). Single nucleotide polymorphisms (SNPs) were identified as being statistically significantly associated (adj. P < 0.05) with both reproductive and productive traits for both breed types. However, there was little across breed commonality, with only two SNPs (rs110240246 and rs110344317; adj. P < 0.05) located within the genomic regions of the LCORL and MSTN genes respectively, identified in both Charolais and Limousin populations, associated with traits including carcass weight, cull-cow weight and live-weight. Significant SNPs within the MSTN gene were also associated with both reproduction and production related traits within each breed. Finally, traits including calving difficulty, calf mortality and calving interval were associated with SNPs within genomic regions comprising genes involved in cellular growth and lipid metabolism. Genetic variants identified as associated with both important reproductive efficiency and production related traits from this study warrant further analyses for their potential incorporation into breeding programmes to support the sustainability of beef cattle production.

Genome-wide identification of major genes and genomic prediction using high-density and text-mined gene-based SNP panels in Hanwoo (Korean cattle)

It was hypothesized that single-nucleotide polymorphisms (SNPs) extracted from text-mined genes could be more tightly related to causal variant for each trait and that differentially weighting of this SNP panel in the GBLUP model could improve the performance of genomic prediction in cattle. Fitting two GRMs constructed by text-mined SNPs and SNPs except text-mined SNPs from 777k SNPs set (exp_777K) as different random effects showed better accuracy than fitting one GRM (Im_777K) for six traits (e.g. backfat thickness: + 0.002, eye muscle area: + 0.014, Warner–Bratzler Shear Force of semimembranosus and longissimus dorsi: + 0.024 and + 0.068, intramuscular fat content of semimembranosus and longissimus dorsi: + 0.008 and + 0.018). These results can suggest that attempts to incorporate text mining into genomic predictions seem valuable, and further study using text mining can be expected to present the significant results.

Whole genome variants across 57 pig breeds enable comprehensive identification of genetic signatures that underlie breed features

Background

A large number of pig breeds are distributed around the world, their features and characteristics vary among breeds, and they are valuable resources. Understanding the underlying genetic mechanisms that explain across-breed variation can help breeders develop improved pig breeds.

Results

In this study, we performed GWAS using a standard mixed linear model with three types of genome variants (SNP, InDel, and CNV) that were identified from public, whole-genome, sequencing data sets. We used 469 pigs of 57 breeds, and we identified and analyzed approximately 19 million SNPs, 1.8 million InDels, and 18,016 CNVs. We defined six biological phenotypes by the characteristics of breed features to identify the associated genome variants and candidate genes, which included coat color, ear shape, gradient zone, body weight, body length, and body height. A total of 37 candidate genes was identified, which included 27 that were reported previously (e.g., PLAG1 for body weight), but the other 10 were newly detected candidate genes (e.g., ADAMTS9 for coat color).

Conclusion

Our study indicated that using GWAS across a modest number of breeds with high density genome variants provided efficient mapping of complex traits.

Supplementary Information

Supplementary information accompanies this paper at 10.1186/s40104-020-00520-8.

Whole-genome analyses identify loci and selective signals associated with body size in cattle

Body size plays a key role in production, health, selection, and environmental adaptation of animals, but the genetic basis of body size variation is not clearly understood. Here, we conducted genome-wide association studies (GWAS) of 15 body size traits using autosomal single nucleotide polymorphisms (SNPs) derived from whole-genome sequences of 31 Brahman cattle and 131 Yunling cattle and identified 20 significant loci, which implicated 18 candidate genes. For ischium width, the most significant SNP was assigned to LCORL, a famous gene controlling body size. For chest width, the most significant SNP was located upstream of BMP5, a secreted ligand of transformation growth factor-beta superfamily of proteins involved in bone and cartilage development. Subsequently, we detected selective sweeps in Brahman cattle using integrated Haplotype Score, composite likelihood ratio, and nucleotide diversity. The results showed CNTNAP5 locus associated with hip cross height and LIMCH1 locus associated with forehead size were in selective signals, which were consistent with higher hip cross height and higher forehead size in Brahman cattle compared with Yunling cattle. Our findings provide genetic insights into variation and selection of body size using GWAS and selective signals and will accelerate future efforts aimed at cattle improvement.

Genome-wide association studies reveal novel loci associated with carcass and body measures in beef cattle

Genomic selection has an essential role in the livestock economy by increasing selection productivity. Genomics provides a mechanism to increase the rate of genetic gain using marker-assisted selection. Various quantitative trait loci (QTL) associated with body, carcass and meat quality traits in beef cattle have been found. It is widely accepted that QTL traits in livestock species are regulated by several genes and factors from the environment. Genome-wide association studies (GWAS) are a powerful approach in identifying QTL and to establish genomic regions harboring the genes and polymorphisms associated with specific characteristics in beef cattle. Due to their impact on economic returns, growth, carcass and meat quality traits of cattle are frequently used as essential criteria in selection in breeding programs., GWAS has been used in beef cattle breeding and genetic program and some progress has been made. Furthermore, numerous genes and markers related to productivity traits in beef cattle have been found. This review summarizes the advances in the use of GWAS in beef cattle production and outlines the associations with growth, carcass, and meat quality.

Identification and validation of a novel candidate gene regulating net meat weight in Simmental beef cattle based on imputed next-generation sequencing

Objectives

Genome‐wide association studies (GWAS) represent a powerful approach to detecting candidate genes for economically important traits in livestock. Our aim was to identify promising candidate muscle development genes that affect net meat weight (NMW) and validate these candidate genes in cattle.

Materials and methods

Using a next‐generation sequencing (NGS) dataset, we applied ~ 12 million imputed single nucleotide polymorphisms (SNPs) from 1,252 Simmental cattle to detect genes influencing net meat yield by way of a linear mixed model method. Haplotype and linkage disequilibrium (LD) blocks were employed to augment support for identified genes. To investigate the role of MTPN in bovine muscle development, we isolated myoblasts from the longissimus dorsi of a bovine foetus and treated the cells during proliferation, differentiation and hypertrophy.

Results

We identified one SNP (rs100670823) that exceeded our stringent significance threshold (P = 8.58 × 10⁻⁸) for a putative NMW‐related quantitative trait locus (QTL). We identified a promising candidate gene, myotrophin (MTPN), in the region around this SNP Myotrophin had a stimulatory effect on six muscle‐related markers that regulate differentiation and myoblast fusion. During hypertrophy, myotrophin promoted myotube hypertrophy and increased myotube diameters. Cell viability assay and flow cytometry showed that myotrophin inhibited myoblast proliferation.

Conclusions

The present experiments showed that myotrophin increases differentiation and hypertrophy of skeletal muscle cells, while inhibiting their proliferation. Our examination of GWAS results with in vitro biological studies provides new information regarding the potential application of myotrophin to increase meat yields in cattle and helpful information for further studies.

Whole-genome sequencing of European autochthonous and commercial pig breeds allows the detection of signatures of selection for adaptation of genetic resources to different breeding and production systems

Background

Natural and artificial directional selection in cosmopolitan and autochthonous pig breeds and wild boars have shaped their genomes and resulted in a reservoir of animal genetic diversity. Signatures of selection are the result of these selection events that have contributed to the adaptation of breeds to different environments and production systems. In this study, we analysed the genome variability of 19 European autochthonous pig breeds (Alentejana, Bísara, Majorcan Black, Basque, Gascon, Apulo-Calabrese, Casertana, Cinta Senese, Mora Romagnola, Nero Siciliano, Sarda, Krškopolje pig, Black Slavonian, Turopolje, Moravka, Swallow-Bellied Mangalitsa, Schwäbisch-Hällisches Schwein, Lithuanian indigenous wattle and Lithuanian White old type) from nine countries, three European commercial breeds (Italian Large White, Italian Landrace and Italian Duroc), and European wild boars, by mining whole-genome sequencing data obtained by using a DNA-pool sequencing approach. Signatures of selection were identified by using a single-breed approach with two statistics [within-breed pooled heterozygosity (H_P) and fixation index (F_ST)] and group-based F_ST approaches, which compare groups of breeds defined according to external traits and use/specialization/type.

Results

We detected more than 22 million single nucleotide polymorphisms (SNPs) across the 23 compared populations and identified 359 chromosome regions showing signatures of selection. These regions harbour genes that are already known or new genes that are under selection and relevant for the domestication process in this species, and that affect several morphological and physiological traits (e.g. coat colours and patterns, body size, number of vertebrae and teats, ear size and conformation, reproductive traits, growth and fat deposition traits). Wild boar related signatures of selection were detected across all the genome of several autochthonous breeds, which suggests that crossbreeding (accidental or deliberate) occurred with wild boars.

Conclusions

Our findings provide a catalogue of genetic variants of many European pig populations and identify genome regions that can explain, at least in part, the phenotypic diversity of these genetic resources.

Genome-Wide Scan for Runs of Homozygosity Identifies Candidate Genes Related to Economically Important Traits in Chinese Merino

Simple Summary

Runs of homozygosity (ROH) are commonly used to estimate inbreeding coefficients and identify selection signatures in livestock population. The present study determined ROH patterns, estimated the inbreeding levels, and identified the genome regions with high ROH frequency (ROH hotspots) in Chinese Merino. Our results showed that the genome of Chinese Merino harbored lower ROH abundance. Moreover, the inbreeding levels were relatively low. Thirteen ROH hotspots consisting of 190 genes were identified. The ROH hotspots overlapped the selective signatures might be associated with body size, horn traits, immune traits and environment adaption. These findings could contribute to an optimum breeding program by identifying the candidate genes related to economically traits in Chinese Merino.

Abstract

In this study, we estimated the number, length, and frequency of runs of homozygosity (ROH) in 635 Chinese Merino and identified genomic regions with high ROH frequency using the OvineSNP50 whole-genome genotyping array. A total of 6039 ROH exceeding 1 Mb were detected in 634 animals. The average number of ROH in each animal was 9.23 and the average length was 5.87 Mb. Most of the ROH were less than 10 Mb, accounting for 88.77% of the total number of detected ROH. In addition, Ovies aries chromosome (OAR) 21 and OAR3 exhibited the highest and lowest coverage of chromosomes by ROH, respectively. OAR1 displayed the highest number of ROH, while the lowest number of ROH was found on OAR24. An inbreeding coefficient of 0.023 was calculated from ROH greater than 1 Mb. Thirteen regions on chromosomes 1, 2, 3, 5, 6, 10, 11, and 16 were found to contain ROH hotspots. Within the genome regions of OAR6 and OAR11, NCAPG/LCORL, FGF11 and TP53 were identified as the candidate genes related to body size, while the genome region of OAR10 harbored RXFP2 gene responsible for the horn trait. These findings indicate the adaptive to directional trait selection in Chinese Merino.

Genetic Architecture of Carcass and Meat Quality Traits in Montana Tropical® Composite Beef Cattle

The Montana Tropical^® Composite is a recently developed beef cattle population that is rapidly expanding in Brazil and other tropical countries. This is mainly due to its improved meat quality and adaptation to tropical climate conditions compared to Zebu and Taurine cattle breeds, respectively. This study aimed to investigate the genetic architecture of ultrasound-based carcass and meat quality traits in Montana Tropical^® Composite beef cattle. Therefore, we estimated variance components and genetic parameters and performed genome-wide association studies using the weighted single-step Genomic Best Linear Unbiased Prediction (GBLUP) approach. A pedigree dataset containing 28,480 animals was used, in which 1,436 were genotyped using a moderate-density Single Nucleotide Polymorphism panel (30K; 30,105 SNPs). A total of 9,358, 5,768, 7,996, and 1,972 phenotypic records for the traits Longissimus muscle area (LMA), backfat thickness (BFT), rump fat thickness (RFT), and for marbling score (MARB), respectively, were used for the analyses. Moderate to high heritability estimates were obtained and ranged from 0.16 ± 0.03 (RFT) to 0.33 ± 0.05 (MARB). A high genetic correlation was observed between BFT and RFT (0.97 ± 0.02), suggesting that a similar set of genes affects both traits. The most relevant genomic regions associated with LMA, BFT, RFT, and MARB were found on BTA10 (5.4–5.8 Mb), BTA27 (25.2–25.5 Mb), BTA18 (60.6–61.0 Mb), and BTA21 (14.8–15.4 Mb). Two overlapping genomic regions were identified for RFT and MARB (BTA13:47.9–48.1 Mb) and for BFT and RFT (BTA13:61.5–62.3 Mb). Candidate genes identified in this study, including PLAG1, LYN, WWOX, and PLAGL2, were previously reported to be associated with growth, stature, skeletal muscle growth, fat thickness, and fatty acid composition. Our results indicate that ultrasound-based carcass and meat quality traits in the Montana Tropical^® Composite beef cattle are heritable, and therefore, can be improved through selective breeding. In addition, various novel and already known genomic regions related to these traits were identified, which contribute to a better understanding of the underlying genetic background of LMA, BFT, RFT, and MARB in the Montana Tropical Composite population.

NCAPG Dynamically Coordinates the Myogenesis of Fetal Bovine Tissue by Adjusting Chromatin Accessibility

NCAPG is a subunit of condensin I that plays a crucial role in chromatin condensation during mitosis. NCAPG has been demonstrated to be associated with farm animal growth traits. However, its role in regulating myoblast differentiation is still unclear. We used myoblasts derived from fetal bovine tissue as an in vitro model and found that NCAPG was expressed during myogenic differentiation in the cytoplasm and nucleus. Silencing NCAPG prolonged the mitosis and impaired the differentiation due to increased myoblast apoptosis. After 1.5 days of differentiation, silencing NCAPG enhanced muscle-specific gene expression. An assay for transposase-accessible chromatin- high throughput sequencing (ATAC-seq) revealed that silencing NCAPG altered chromatin accessibility to activating protein 1 (AP-1) and its subunits. Knocking down the expression of the AP-1 subunits fos-related antigen 2 (FOSL2) or junB proto-oncogene (JUNB) enhanced part of the muscle-specific gene expression. In conclusion, our data provide valuable evidence about NCAPG’s function in myogenesis, as well as its potential role in gene expression.

Genomic Regions Associated With Skeletal Type Traits in Beef and Dairy Cattle Are Common to Regions Associated With Carcass Traits, Feed Intake and Calving Difficulty

Linear type traits describing the skeletal characteristics of an animal are moderately to strongly genetically correlated with a range of other performance traits in cattle including feed intake, reproduction traits and carcass merit; thus, type traits could also provide useful insights into the morphological differences among animals underpinning phenotypic differences in these complex traits. The objective of the present study was to identify genomic regions associated with five subjectively scored skeletal linear traits, to determine if these associated regions are common in multiple beef and dairy breeds, and also to determine if these regions overlap with those proposed elsewhere to be associated with correlated performance traits. Analyses were carried out using linear mixed models on imputed whole genome sequence data separately in 1,444 Angus, 1,129 Hereford, 6,433 Charolais, 8,745 Limousin, 1,698 Simmental, and 4,494 Holstein-Friesian cattle, all scored for the linear type traits. There was, on average, 18 months difference in age at assessment of the beef versus the dairy animals. While the majority of the identified quantitative trait loci (QTL), and thus genes, were both trait-specific and breed-specific, a large-effect pleiotropic QTL on BTA6 containing the NCAPG and LCORL genes was associated with all skeletal traits in the Limousin population and with wither height in the Angus. Other than that, little overlap existed in detected QTLs for the skeletal type traits in the other breeds. Only two QTLs overlapped the beef and dairy breeds; both QTLs were located on BTA5 and were associated with height in both the Angus and the Holstein-Friesian, despite the difference in age at assessment. Several detected QTLs in the present study overlapped with QTLs documented elsewhere that are associated with carcass traits, feed intake, and calving difficulty. While most breeding programs select for the macro-traits like carcass weight, carcass conformation, and feed intake, the higher degree of granularity with selection on the individual linear type traits in a multi-trait index underpinning the macro-level goal traits, presents an opportunity to help resolve genetic antagonisms among morphological traits in the pursuit of the animal with optimum performance metrics.

Genetic architecture of quantitative traits in beef cattle revealed by genome wide association studies of imputed whole genome sequence variants: I: feed efficiency and component traits

BACKGROUND

Genome wide association studies (GWAS) on residual feed intake (RFI) and its component traits including daily dry matter intake (DMI), average daily gain (ADG), and metabolic body weight (MWT) were conducted in a population of 7573 animals from multiple beef cattle breeds based on 7,853,211 imputed whole genome sequence variants. The GWAS results were used to elucidate genetic architectures of the feed efficiency related traits in beef cattle.

RESULTS

The DNA variant allele substitution effects approximated a bell-shaped distribution for all the traits while the distribution of additive genetic variances explained by single DNA variants followed a scaled inverse chi-squared distribution to a greater extent. With a threshold of P-value < 1.00E-05, 16, 72, 88, and 116 lead DNA variants on multiple chromosomes were significantly associated with RFI, DMI, ADG, and MWT, respectively. In addition, lead DNA variants with potentially large pleiotropic effects on DMI, ADG, and MWT were found on chromosomes 6, 14 and 20. On average, missense, 3'UTR, 5'UTR, and other regulatory region variants exhibited larger allele substitution effects in comparison to other functional classes. Intergenic and intron variants captured smaller proportions of additive genetic variance per DNA variant. Instead 3'UTR and synonymous variants explained a greater amount of genetic variance per DNA variant for all the traits examined while missense, 5'UTR and other regulatory region variants accounted for relatively more additive genetic variance per sequence variant for RFI and ADG, respectively. In total, 25 to 27 enriched cellular and molecular functions were identified with lipid metabolism and carbohydrate metabolism being the most significant for the feed efficiency traits.

CONCLUSIONS

RFI is controlled by many DNA variants with relatively small effects whereas DMI, ADG, and MWT are influenced by a few DNA variants with large effects and many DNA variants with small effects. Nucleotide polymorphisms in regulatory region and synonymous functional classes play a more important role per sequence variant in determining variation of the feed efficiency traits. The genetic architecture as revealed by the GWAS of the imputed 7,853,211 DNA variants will improve our understanding on the genetic control of feed efficiency traits in beef cattle.

Effect of DNA markers on the fertility traits of Japanese Black cattle for improving beef quantity and quality

Carcass traits have been efficiently improved by recent selection using DNA markers in beef cattle. Additionally, DNA markers might have an effect on other traits such as fertility traits; therefore attention should also be paid to such pleiotropic effects. However, the effects of the markers on both carcass and fertility traits have never been evaluated in the same population, since they are generally measured in different populations. The objective in the current study was to discuss effectiveness of DNA markers developed for carcass traits through investigation of their effects on carcass and fertility traits in a population. We genotyped six markers SCD V293A, FASN g.841G>C, PLAG1 g.49066C>G, NCAPG I442M, DGAT1 K232A, and EDG1 g.1471620G>T in a Japanese Black cattle population (n=515). To investigate their effects on carcass and fertility traits, we performed statistical analysis (ANOVA and the Tukey–Kramer honestly significant difference (HSD) test). In the results, three of six markers, SCD V293A, NCAPG I442M, and EGD1 g.1471620G>T, were significantly associated with both carcass and fertility traits. Remarkably, the same allele for each marker had positive effects on both traits, suggesting that we would be able to simultaneously improve them using these markers in this population. However, previous studies reported that the effects of DNA markers could differ among populations. Therefore, it is necessary to confirm the effect of the marker in each population before it is used for improvement.

Genetic architecture of quantitative traits in beef cattle revealed by genome wide association studies of imputed whole genome sequence variants: II: carcass merit traits

BACKGROUND

Genome wide association studies (GWAS) were conducted on 7,853,211 imputed whole genome sequence variants in a population of 3354 to 3984 animals from multiple beef cattle breeds for five carcass merit traits including hot carcass weight (HCW), average backfat thickness (AFAT), rib eye area (REA), lean meat yield (LMY) and carcass marbling score (CMAR). Based on the GWAS results, genetic architectures of the carcass merit traits in beef cattle were elucidated.

RESULTS

The distributions of DNA variant allele substitution effects approximated a bell-shaped distribution for all the traits while the distribution of additive genetic variances explained by single DNA variants conformed to a scaled inverse chi-squared distribution to a greater extent. At a threshold of P-value < 10-5, 51, 33, 46, 40, and 38 lead DNA variants on multiple chromosomes were significantly associated with HCW, AFAT, REA, LMY, and CMAR, respectively. In addition, lead DNA variants with potentially large pleiotropic effects on HCW, AFAT, REA, and LMY were found on chromosome 6. On average, missense variants, 3'UTR variants, 5'UTR variants, and other regulatory region variants exhibited larger allele substitution effects on the traits in comparison to other functional classes. The amounts of additive genetic variance explained per DNA variant were smaller for intergenic and intron variants on all the traits whereas synonymous variants, missense variants, 3'UTR variants, 5'UTR variants, downstream and upstream gene variants, and other regulatory region variants captured a greater amount of additive genetic variance per sequence variant for one or more carcass merit traits investigated. In total, 26 enriched cellular and molecular functions were identified with lipid metabolisms, small molecular biochemistry, and carbohydrate metabolism being the most significant for the carcass merit traits.

CONCLUSIONS

The GWAS results have shown that the carcass merit traits are controlled by a few DNA variants with large effects and many DNA variants with small effects. Nucleotide polymorphisms in regulatory, synonymous, and missense functional classes have relatively larger impacts per sequence variant on the variation of carcass merit traits. The genetic architecture as revealed by the GWAS will improve our understanding on genetic controls of carcass merit traits in beef cattle.

Unraveling genomic associations with feed efficiency and body weight traits in chickens through an integrative approach

BACKGROUND

Feed efficiency and growth rate have been targets for selection to improve chicken production. The incorporation of genomic tools may help to accelerate selection. We genotyped 529 individuals using a high-density SNP chip (600 K, Affymetrix®) to estimate genomic heritability of performance traits and to identify genomic regions and their positional candidate genes associated with performance traits in a Brazilian F2 Chicken Resource population. Regions exhibiting selection signatures and a SNP dataset from resequencing were integrated with the genomic regions identified using the chip to refine the list of positional candidate genes and identify potential causative mutations.

RESULTS

Feed intake (FI), feed conversion ratio (FC), feed efficiency (FE) and weight gain (WG) exhibited low genomic heritability values (i.e. from 0.0002 to 0.13), while body weight at hatch (BW1), 35 days-of-age (BW35), and 41 days-of-age (BW41) exhibited high genomic heritability values (i.e. from 0.60 to 0.73) in this F2 population. Twenty unique 1-Mb genomic windows were associated with BW1, BW35 or BW41, located on GGA1-4, 6-7, 10, 14, 24, 27 and 28. Thirty-eight positional candidate genes were identified within these windows, and three of them overlapped with selection signature regions. Thirteen predicted deleterious and three high impact sequence SNPs in these QTL regions were annotated in 11 positional candidate genes related to osteogenesis, skeletal muscle development, growth, energy metabolism and lipid metabolism, which may be associated with body weight in chickens.

CONCLUSIONS

The use of a high-density SNP array to identify QTL which were integrated with whole genome sequence signatures of selection allowed the identification of candidate genes and candidate causal variants. One novel QTL was detected providing additional information to understand the genetic architecture of body weight traits. We identified QTL for body weight traits, which were also associated with fatness in the same population. Our findings form a basis for further functional studies to elucidate the role of specific genes in regulating body weight and fat deposition in chickens, generating useful information for poultry breeding programs.

Identification of muscle-specific candidate genes in Simmental beef cattle using imputed next generation sequencing

Genome-wide association studies (GWAS) have commonly been used to identify candidate genes that control economically important traits in livestock. Our objective was to detect potential candidate genes associated mainly with muscle development traits related to dimension of hindquarter in cattle. A next generation sequencing (NGS) dataset to imputed to 12 million single nucleotide polymorphisms (SNPs) (from 1252 Simmental beef cattle) were used to search for genes affecting hindquarter traits using a linear, mixed model approach. We also used haplotype and linkage disequilibrium blocks to further support our identifications. We identified 202 significant SNPs in the bovine BTA4 chromosome region associated with width of hind leg, based on a stringent statistical threshold (p = 0.05/ effective number of SNPs identified). After exploring the region around these SNPs, we found candidate genes that were potentially related to the associated markers. More importantly, we identified a region of approximately 280 Kb on the BTA4 chromosome that harbored several muscle specific candidate genes, genes to be in a potential region for muscle development. However, we also found candidate gene SLC13A1 on BTA4, which seems to be associated with bone disorders (such as chondrodysplasia) in Simmental beef cattle.

Reaffirmation of known major genes and the identification of novel candidate genes associated with carcass-related metrics based on whole genome sequence within a large multi-breed cattle population

Background

The high narrow sense heritability of carcass traits suggests that the underlying additive genetic potential of an individual should be strongly correlated with both animal carcass quality and quantity, and therefore, by extension, carcass value. Therefore, the objective of the present study was to detect genomic regions associated with three carcass traits, namely carcass weight, conformation and fat cover, using imputed whole genome sequence in 28,470 dairy and beef sires from six breeds with a total of 2,199,926 phenotyped progeny.

Results

Major genes previously associated with carcass performance were identified, as well as several putative novel candidate genes that likely operate both within and across breeds. The role of MSTN in carcass performance was re-affirmed with the segregating Q204X mutation explaining 1.21, 1.11 and 5.95% of the genetic variance in carcass weight, fat and conformation, respectively in the Charolais population. In addition, a genomic region on BTA6 encompassing the NCAPG/LCORL locus, which is a known candidate locus associated with body size, was associated with carcass weight in Angus, Charolais and Limousin. Novel candidate genes identified included ZFAT in Angus, and SLC40A1 and the olfactory gene cluster on BTA15 in Charolais. Although the majority of associations were breed specific, associations that operated across breeds included SORCS1 on BTA26, MCTP2 on BTA21 and ARL15 on BTA20; these are of particular interest due to their potential informativeness in across-breed genomic evaluations. Genomic regions affecting all three carcass traits were identified in each of the breeds, although these were mainly concentrated on BTA2 and BTA6, surrounding MSTN and NCAPG/LCORL, respectively. This suggests that although major genes may be associated with all three carcass traits, the majority of genes containing significant variants (unadjusted p-value < 10^− 4) may be trait specific associations of small effect.

Conclusions

Although plausible novel candidate genes were identified, the proportion of variance explained by these candidates was minimal thus reaffirming that while carcass performance may be affected by major genes in the form of MSTN and NCAPG/LCORL, the majority of variance is attributed to the additive (and possibly multiplicative) effect of many polymorphisms of small effect.

Electronic supplementary material

The online version of this article (10.1186/s12864-019-6071-9) contains supplementary material, which is available to authorized users.