Gain in cellular organization of inflammatory breast cancer: A 3D in vitro model that mimics the in vivo metastasis

Influence of Macrophages on Vascular Invasion of Inflammatory Breast Cancer Emboli Measured Using an In Vitro Microfluidic Multi-Cellular Platform

Inflammatory breast cancer (IBC) is an aggressive disease with a poor prognosis and a lack of effective treatments. It is widely established that understanding the interactions between tumor-associated macrophages (TAMs) and the tumor microenvironment is essential for identifying distinct targeting markers that help with prognosis and subsequent development of effective treatments. In this study, we present a 3D in vitro microfluidic IBC platform consisting of THP1 M0, M1, or M2 macrophages, IBC cells, and endothelial cells. The platform comprises a collagen matrix that includes an endothelialized vessel, creating a physiologically relevant environment for cellular interactions. Through the utilization of this platform, it was discovered that the inclusion of tumor-associated macrophages (TAMs) led to an increase in the formation of new blood vessel sprouts and enhanced permeability of the endothelium, regardless of the macrophage phenotype. Interestingly, the platforms containing THP-1 M1 or M2 macrophages exhibited significantly greater porosity in the collagen extracellular matrix (ECM) compared to the platforms containing THP-1 M0 and the MDA-IBC3 cells alone. Cytokine analysis revealed that IL-8 and MMP9 showed selective increases when macrophages were cultured in the platforms. Notably, intravasation of tumor cells into the vessels was observed exclusively in the platform containing MDA-IBC3 and M0 macrophages.

Morphometrical, Morphological, and Immunocytochemical Characterization of a Tool for Cytotoxicity Research: 3D Cultures of Breast Cell Lines Grown in Ultra-Low Attachment Plates

Three-dimensional cell cultures may better mimic avascular tumors. Yet, they still lack characterization and standardization. Therefore, this study aimed to (a) generate multicellular aggregates (MCAs) of four breast cell lines: MCF7, MDA-MB-231, and SKBR3 (tumoral) and MCF12A (non-tumoral) using ultra-low attachment (ULA) plates, (b) detail the methodology used for their formation and analysis, providing technical tips, and (c) characterize the MCAs using morphometry, qualitative cytology (at light and electron microscopy), and quantitative immunocytochemistry (ICC) analysis. Each cell line generated uniform MCAs with structural differences among cell lines: MCF7 and MDA-MB-231 MCAs showed an ellipsoid/discoid shape and compact structure, while MCF12A and SKBR3 MCAs were loose, more flattened, and presented bigger areas. MCF7 MCAs revealed glandular breast differentiation features. ICC showed a random distribution of the proliferating and apoptotic cells throughout the MCAs, not fitting in the traditional spheroid model. ICC for cytokeratin, vimentin, and E-cadherin showed different results according to the cell lines. Estrogen (ER) and progesterone (PR) receptors were positive only in MCF7 and human epidermal growth factor receptor 2 (HER-2) in SKBR3. The presented characterization of the MCAs in non-exposed conditions provided a good baseline to evaluate the cytotoxic effects of potential anticancer compounds.

Comparative transcriptional analyses of preclinical models and patient samples reveal MYC and RELA driven expression patterns that define the molecular landscape of IBC

Inflammatory breast cancer (IBC) is an aggressive disease for which the spectrum of preclinical models was rather limited in the past. More recently, novel cell lines and xenografts have been developed. This study evaluates the transcriptome of an extended series of IBC preclinical models and performed a comparative analysis with patient samples to determine the extent to which the current models recapitulate the molecular characteristics of IBC observed clinically. We demonstrate that the IBC preclinical models are exclusively estrogen receptor (ER)-negative and of the basal-like subtype, which reflects to some extent the predominance of these subtypes in patient samples. The IBC-specific 79-signature we previously reported was retrained and discriminated between IBC and non-IBC preclinical models, but with a relatively high rate of false positive predictions. Further analyses of gene expression profiles revealed important roles for cell proliferation, MYC transcriptional activity, and TNFɑ/NFκB in the biology of IBC. Patterns of MYC expression and transcriptional activity were further explored in patient samples, which revealed interactions with ESR1 expression that are contrasting in IBC and nIBC and notable given the comparatively poor outcomes of ER+ IBC. Our analyses also suggest important roles for NMYC, MXD3, MAX, and MLX in shaping MYC signaling in IBC. Overall, we demonstrate that the IBC preclinical models can be used to unravel cancer cell intrinsic molecular features, and thus constitute valuable research tools. Nevertheless, the current lack of ER-positive IBC models remains a major hurdle, particularly since interactions with the ER pathway appear to be relevant for IBC.

Insulin regulates human mammosphere development and function

Assessing the role of lactogenic hormones in human mammary gland development is limited due to issues accessing tissue samples and so development of a human in vitro three-dimensional mammosphere model with functions similar to secretory alveoli in the mammary gland can aid to overcome this shortfall. In this study, a mammosphere model has been characterised using human mammary epithelial cells grown on either mouse extracellular matrix or agarose and showed insulin is essential for formation of mammospheres. Insulin was shown to up-regulate extracellular matrix genes. Microarray analysis of these mammospheres revealed an up-regulation of differentiation, cell-cell junctions, and cytoskeleton organisation functions, suggesting mammosphere formation may be regulated through ILK signalling. Comparison of insulin and IGF-1 effects on mammosphere signalling showed that although IGF-1 could induce spherical structures, the cells did not polarise correctly as shown by the absence of up-regulation of polarisation genes and did not induce the expression of milk protein genes. This study demonstrated a major role for insulin in mammary acinar development for secretory differentiation and function indicating the potential for reduced lactational efficiency in women with obesity and gestational diabetes.

3D Tumor Spheroid Models for In Vitro Therapeutic Screening of Nanoparticles

The anticancer activity of compounds and nanoparticles is most often determined in the cell monolayer. However, three-dimensional (3D) systems, such as tumor spheroids, are more representing the natural tumor microenvironment. They have been shown to have higher invasiveness and resistance to cytotoxic agents and radiotherapy compared to cells growing in 2D monolayer. Furthermore, to improve the prediction of clinical efficacy of drugs, in the past decades, even more sophisticated systems, such as multicellular 3D cultures, closely representing natural tumor microenvironment have been developed. Those cultures are formed from either cell lines or patient-derived tumor cells. Such models are very attractive and could improve the selection of tested materials for clinical trials avoiding unnecessary expensive tests in vivo. The microenvironment in tumor spheroids is different, and those differences or the interaction between several cell populations may contribute to different tumor response to the treatment. Also, different types of nanoparticles may have different behavior in 3D models, depending on their nature, physicochemical properties, the presence of targeting ligands on the surface, etc. Therefore, it is very important to understand in which cases which type of tumor spheroid is more suitable for testing specific types of nanoparticles, which conditions should be used, and which analytical method should be applied.

Ultrastructural Analysis of Inflammatory Breast Cancer Cell Clusters in an Ex Vivo Environment Mechanically Mimicking the Lymph Vascular System

Background:

Inflammatory breast cancer (IBC) is a rare form of breast cancer with a poor prognosis. IBC is characterized by florid lymphovascular tumor emboli in the skin and the parenchyma of the breast. We hypothesized that the formation of these emboli/clusters plays a pivotal role in IBC metastasis and its rapid progression, and that their structure and function may be a key to identifying molecular biological differences between IBC and non IBC.

Methods:

Mechanical methods were used to mimic the lymph fluid viscosity by adding 2.25% of PEG8000 to the media. Clusters were obtained for IBC tumor cell lines (SUM149 and IBC-3), non IBC tumor cell lines (MDA-MB-231, MDA-MB-468, and MCF7), and a non-tumorigenic human mammary epithelial cell line (MCF10A). Clusters were analyzed by light microscopy, and then prepared for and observed by transmission electron microscopy (TEM).

Results:

Significant differences were seen between IBC and non IBC clusters. The TEM analysis revealed that IBC cells harbored numerous microvilli and microvesicles, both on the free outer surface and inside the cluster. Microvilli from IBC cell clusters were noted at higher density and were longer than those of non IBC cell clusters.

Conclusions:

IBC tumor cell clusters exhibited distinct ultrastructural features characterized by the presence of long, crowded microvilli and numerous microvesicles. These microvilli may play an important role in the biology and aggressiveness of IBC.

The application of three-dimensional cell culture in clinical medicine

Three-dimensional cell culture technology is a novel cell culture technology, which can simulate the growth state of cells in vivo by scaffolds or special devices. Cells can form tissues or organs in vitro. It combines some advantages of traditional cell experiments and animal model experiments. Because of its advantages, it is widely used in clinical medical research, including research on stem cell differentiation, research on cell behavior, migration and invasion, study on microenvironment, study on drug sensitivity and radio-sensitivity of tumor cells, etc. In this paper, the evolution and classification of three-dimensional cell culture are reviewed, also the advantages and shortages are compared. The application of three-dimensional cell culture in clinical medicine are summarized to provide an insight into translational medicine.

In vitro vascularized tumor platform for modeling tumor-vasculature interactions of inflammatory breast cancer

Inflammatory breast cancer (IBC), a rare form of breast cancer associated with increased angiogenesis and metastasis, is largely driven by tumor-stromal interactions with the vasculature and the extracellular matrix (ECM). However, there is currently a lack of understanding of the role these interactions play in initiation and progression of the disease. In this study, we developed the first three-dimensional, in vitro, vascularized, microfluidic IBC platform to quantify the spatial and temporal dynamics of tumor-vasculature and tumor-ECM interactions specific to IBC. Platforms consisting of collagen type 1 ECM with an endothelialized blood vessel were cultured with IBC cells, MDA-IBC3 (HER2+) or SUM149 (triple negative), and for comparison to non-IBC cells, MDA-MB-231 (triple negative). Acellular collagen platforms with endothelialized blood vessels served as controls. SUM149 and MDA-MB-231 platforms exhibited a significantly (p < .05) higher vessel permeability and decreased endothelial coverage of the vessel lumen compared to the control. Both IBC platforms, MDA-IBC3 and SUM149, expressed higher levels of vascular endothelial growth factor (p < .05) and increased collagen ECM porosity compared to non-IBCMDA-MB-231 (p < .05) and control (p < .01) platforms. Additionally, unique to the MDA-IBC3 platform, we observed progressive sprouting of the endothelium over time resulting in viable vessels with lumen. The newly sprouted vessels encircled clusters of MDA-IBC3 cells replicating a key feature of in vivo IBC. The IBC in vitro vascularized platforms introduced in this study model well-described in vivo and clinical IBC phenotypes and provide an adaptable, high throughput tool for systematically and quantitatively investigating tumor-stromal mechanisms and dynamics of tumor progression.

Vasculogenic mimicry-associated ultrastructural findings in human and canine inflammatory breast cancer cell lines

Background

Human inflammatory breast cancer (IBC) and canine inflammatory mammary cancer (IMC) are the most lethal mammary cancers. An exacerbated angiogenesis and the existence of vasculogenic mimicry (VM) are hallmarks of these tumors. The information regarding VM and ultrastructural characteristics of mammary cell lines is scant.

Methods

In this study, IBC cell line SUM149 and IMC cell line IPC-366 in adherent (2D) and non-adherent (3D) (mammospheres, cancer stem cells) conditions were analyzed by transmission and scanning electron microscopy (TEM and SEM, respectively).

Results

The TEM revealed round to oval shape cells with microvilli on the surface, high numbers of peroxisomes in close apposition to lipid droplets and some extracellular derived vesicles. The TEM and the SEM mammospheres revealed group of cells clumping together with a central lumen (resembling a mammary acini). The cells joint are tight junctions and zonula adherens. By SEM two cell morphologies were observed: spherical and flattened cells. There was evidence endothelial-like cells (ELCs), which is characteristic for this disease, showing several or unique cytoplasmic empty space. ELCs were more frequent in 3D than in 2D culture conditions and contained Weibel-Palade cytoplasmic bodies, which are exclusive structures of endothelial cells.

Conclusions

Both cell lines, IPC-366 and SUM-149, shared ultrastructural characteristics, further supporting canine IMC as a model for the human disease. To the best of our knowledge, this is the first study that demonstrate the morphological differentiation of cultured cancer stem cells from cancer epithelial cell lines into endothelial-like cells, confirming the vasculogenic mimicry phenomenon from an ultrastructural point of view.

Impact of Hydrogel Elasticity and Adherence on Osteosarcoma Cells and Osteoblasts

Biochemical and physical properties of extracellular matrix (ECM) control cell behaviors, but how they affect osteosarcoma cells that do not require attachment and their normal counterparts (osteoblasts) that are anchorage-dependent has not been reported yet. In this study, the effects of matrix elasticity and adherence on osteosarcoma MG63 cells are investigated using four types of scaffolds (collagen type I, matrigel, alginate, and agarose) with varied adhesion ligands and rigidity, as compared with osteoblast hFOB1.19 cells. MG63 cells on 2D films are sensitive to ECM adherence, similar to the situation of hFOB1.19 cultured in both 2D and 3D. However, osteosarcoma cells in 3D hydrogels are sensitive to ECM elasticity rather than adherence, with tumor proliferation and malignancy varied with matrix rigidity. The results indicate that osteosarcomas cells might adopt unnatural characteristics on flat surfaces. But in 3D culture, they recover their normal state independent of adherence, as regulated mainly by ECM elasticity via the integrin-mediated focal adhesion pathway, which is further confirmed by in vivo studies. In contrast, osteoblasts and 2D cultured osteosarcoma cells are predominantly influenced by ECM bioactivity regulated by integrin-mediated adherens junction pathway. This study might provide new insights into rational design of scaffolds for tumor/tissue engineering.

Direct Observation of Tunneling Nanotubes within Human Mesenchymal Stem Cell Spheroids

Tunneling nanotubes (TNTs) play an important role in cell-cell communication. TNTs have been predominantly reported among cells in monolayer culture. Using various imaging modalities, including scanning electron microscopy (SEM) and laser scanning confocal microscopy (LSCM), this work reports the finding of TNTs between cells within human mesenchymal stem cell (MSC) spheroids. TNTs visualized by SEM are consistent in size and geometry with those observed in cellular monolayer culture. LSCM imaging of living spheroids confirms the presence of F-actin filaments within the TNTs, which are known to maintain nanotube integrity. In addition, LSCM revealed the distribution of F-actin fibers across the entire spheroid body instead of being confined within individual cells. Intracellular material transport by TNTs was tested in MSC spheroids treated with cytochalasin D (CytoD), a known actin polymerization inhibitor for disrupting TNT formation. CytoD treatment decreased the transport of cytosolic material by at least four-fold compared to untreated spheroids. To the best of our knowledge, this work represents the first direct observation of TNTs within MSC spheroids. These findings offer new physical insight into cellular interactions within spheroids, providing structural information for increasing interests in spheroid-based cell therapy.

Management and potentialities of primary cancer cultures in preclinical and translational studies

The use of patient-derived primary cell cultures in cancer preclinical assays has increased in recent years. The management of resected tumor tissue remains complex and a number of parameters must be respected to obtain complete sample digestion and optimal vitality yield. We provide an overview of the benefits of correct primary cell culture management using different preclinical methodologies, and describe the pros and cons of this model with respect to other kinds of samples. One important advantage is that the heterogeneity of the cell populations composing a primary culture partially reproduces the tumor microenvironment and crosstalk between malignant and healthy cells, neither of which is possible with cell lines. Moreover, the use of patient-derived specimens in innovative preclinical technologies, such as 3D systems or bioreactors, represents an important opportunity to improve the translational value of the results obtained. In vivo models could further our understanding of the crosstalk between tumor and other tissues as they enable us to observe the systemic and biological interactions of a complete organism. Although engineered mice are the most common model used in this setting, the zebrafish (Danio rerio) species has recently been recognized as an innovative experimental system. In fact, the transparent body and incomplete immune system of zebrafish embryos are especially useful for evaluating patient-derived tumor tissue interactions in healthy hosts. In conclusion, ex vivo systems represent an important tool for cancer research, but samples require correct manipulation to maximize their translational value.

Spontaneously-forming spheroids as an in vitro cancer cell model for anticancer drug screening

The limited translational value in clinic of analyses performed on 2-D cell cultures has prompted a shift toward the generation of 3-dimensional (3-D) multicellular systems. Here we present a spontaneously-forming in vitro cancer spheroid model, referred to as spheroids^MARY-X, that precisely reflects the pathophysiological features commonly found in tumor tissues and the lymphovascular embolus. In addition, we have developed a rapid, inexpensive means to evaluate response following drug treatment where spheroid dissolution indices from brightfield image analyses are used to construct dose-response curves resulting in relevant IC₅₀ values. Using the spheroids^MARY-X model, we demonstrate the unique ability of a new class of molecules, containing the caged Garcinia xanthone (CGX) motif, to induce spheroidal dissolution and apoptosis at IC₅₀ values of 0.42 +/−0.02 μM for gambogic acid and 0.66 +/−0.02 μM for MAD28. On the other hand, treatment of spheroids^MARY-X with various currently approved chemotherapeutics of solid and blood-borne cancer types failed to induce any response as indicated by high dissolution indices and subsequent poor IC₅₀ values, such as 7.8 +/−3.1 μM for paclitaxel. Our studies highlight the significance of the spheroids^MARY-X model in drug screening and underscore the potential of the CGX motif as a promising anticancer pharmacophore.

Three-Dimensional Breast Cancer Models Mimic Hallmarks of Size-Induced Tumor Progression

Tumor size is strongly correlated with breast cancer metastasis and patient survival. Increased tumor size contributes to hypoxic and metabolic gradients in the solid tumor and to an aggressive tumor phenotype. Thus, it is important to develop three-dimensional (3D) breast tumor models that recapitulate size-induced microenvironmental changes and, consequently, natural tumor progression in real time without the use of artificial culture conditions or gene manipulations. Here, we developed size-controlled multicellular aggregates ("microtumors") of subtype-specific breast cancer cells by using non-adhesive polyethylene glycol dimethacrylate hydrogel microwells of defined sizes (150-600 μm). These 3D microtumor models faithfully represent size-induced microenvironmental changes, such as hypoxic gradients, cellular heterogeneity, and spatial distribution of necrotic/proliferating cells. These microtumors acquire hallmarks of tumor progression in the same cell lines within 6 days. Of note, large microtumors of hormone receptor-positive cells exhibited an aggressive phenotype characterized by collective cell migration and upregulation of mesenchymal markers at mRNA and protein level, which was not observed in small microtumors. Interestingly, triple-negative breast cancer (TNBC) cell lines did not show size-dependent upregulation of mesenchymal markers. In conclusion, size-controlled microtumor models successfully recapitulated clinically observed positive association between tumor size and aggressive phenotype in hormone receptor-positive breast cancer while maintaining clinically proven poor correlation of tumor size with aggressive phenotype in TNBC. Such clinically relevant 3D models generated under controlled experimental conditions can serve as precise preclinical models to study mechanisms involved in breast tumor progression as well as antitumor drug effects as a function of tumor progression. Cancer Res; 76(13); 3732-43. ©2016 AACR.

Liquid-based three-dimensional tumor models for cancer research and drug discovery

Tumors are three-dimensional tissues where close contacts between cancer cells, intercellular interactions between cancer and stromal cells, adhesion of cancer cells to the extracellular matrix, and signaling of soluble factors modulate functions of cancer cells and their response to therapeutics. Three-dimensional cultures of cancer cells overcome limitations of traditionally used monolayer cultures and recreate essential characteristics of tumors such as spatial gradients of oxygen, growth factors, and metabolites and presence of necrotic, hypoxic, quiescent, and proliferative cells. As such, three-dimensional tumor models provide a valuable tool for cancer research and oncology drug discovery. Here, we describe different tumor models and primarily focus on a model known as tumor spheroid. We summarize different technologies of spheroid formation, and discuss the use of spheroids to address the influence of stromal fibroblasts and immune cells on cancer cells in tumor microenvironment, study cancer stem cells, and facilitate compound screening in the drug discovery process. We review major techniques for quantification of cellular responses to drugs and discuss challenges ahead to enable broad utility of tumor spheroids in research laboratories, integrate spheroid models into drug development and discovery pipeline, and use primary tumor cells for drug screening studies to realize personalized cancer treatment.

Spherical cancer models in tumor biology

Three-dimensional (3D) in vitro models have been used in cancer research as an intermediate model between in vitro cancer cell line cultures and in vivo tumor. Spherical cancer models represent major 3D in vitro models that have been described over the past 4 decades. These models have gained popularity in cancer stem cell research using tumorospheres. Thus, it is crucial to define and clarify the different spherical cancer models thus far described. Here, we focus on in vitro multicellular spheres used in cancer research. All these spherelike structures are characterized by their well-rounded shape, the presence of cancer cells, and their capacity to be maintained as free-floating cultures. We propose a rational classification of the four most commonly used spherical cancer models in cancer research based on culture methods for obtaining them and on subsequent differences in sphere biology: the multicellular tumor spheroid model, first described in the early 70s and obtained by culture of cancer cell lines under nonadherent conditions; tumorospheres, a model of cancer stem cell expansion established in a serum-free medium supplemented with growth factors; tissue-derived tumor spheres and organotypic multicellular spheroids, obtained by tumor tissue mechanical dissociation and cutting. In addition, we describe their applications to and interest in cancer research; in particular, we describe their contribution to chemoresistance, radioresistance, tumorigenicity, and invasion and migration studies. Although these models share a common 3D conformation, each displays its own intrinsic properties. Therefore, the most relevant spherical cancer model must be carefully selected, as a function of the study aim and cancer type.

AnaSP: a software suite for automatic image analysis of multicellular spheroids

Today, more and more biological laboratories use 3D cell cultures and tissues grown in vitro as a 3D model of in vivo tumours and metastases. In the last decades, it has been extensively established that multicellular spheroids represent an efficient model to validate effects of drugs and treatments for human care applications. However, a lack of methods for quantitative analysis limits the usage of spheroids as models for routine experiments. Several methods have been proposed in literature to perform high throughput experiments employing spheroids by automatically computing different morphological parameters, such as diameter, volume and sphericity. Nevertheless, these systems are typically grounded on expensive automated technologies, that make the suggested solutions affordable only for a limited subset of laboratories, frequently performing high content screening analysis. In this work we propose AnaSP, an open source software suitable for automatically estimating several morphological parameters of spheroids, by simply analyzing brightfield images acquired with a standard widefield microscope, also not endowed with a motorized stage. The experiments performed proved sensitivity and precision of the segmentation method proposed, and excellent reliability of AnaSP to compute several morphological parameters of spheroids imaged in different conditions. AnaSP is distributed as an open source software tool. Its modular architecture and graphical user interface make it attractive also for researchers who do not work in areas of computer vision and suitable for both high content screenings and occasional spheroid-based experiments.

Relative Apoptosis-inducing Potential of Homeopa-thic Condurango 6C and 30C in H460 Lung Cancer Cells In vitro: -Apoptosis-induction by homeopathic Condurango in H460 cells

OBJECTIVES

In homeopathy, it is claimed that more homeopathically-diluted potencies render more protective/curative effects against any disease condition. Potentized forms of Condurango are used successfully to treat digestive problems, as well as esophageal and stomach cancers. However, the comparative efficacies of Condurango 6C and 30C, one diluted below and one above Avogadro's limit (lacking original drug molecule), respectively, have not been critically analyzed for their cell-killing (apoptosis) efficacy against lung cancer cells in vitro, and signalling cascades have not been studied. Hence, the present study was undertaken.

METHODS

3-(4,5-dimethylthiazol-2-yl)-2,5-diphenylte-trazolium bromide (MTT) assays were conducted on H460-non-small-cell lung cancer (NSCLC) cells by using a succussed ethyl alcohol vehicle (placebo) as a control. Studies on cellular morphology, cell cycle regulation, generation of reactive oxygen species (ROS), changes in mitochondrial membrane potential (MMP), and DNA-damage were made, and expressions of related signaling markers were studied. The observations were done in a "blinded" manner.

RESULTS

Both Condurango 6C and 30C induced apoptosis via cell cycle arrest at subG0/G1 and altered expressions of certain apoptotic markers significantly in H460 cells. The drugs induced oxidative stress through ROS elevation and MMP depolarization at 18-24 hours. These events presumably activated a caspase-3-mediated signalling cascade, as evidenced by reverse transcriptase- polymerase chain reaction (RT-PCR), western blot and immunofluorescence studies at a late phase (48 hours) in which cells were pushed towards apoptosis.

CONCLUSION

Condurango 30C had greater apoptotic effect than Condurango 6C as claimed in the homeopathic doctrine.

Three-dimensional in vitro co-culture model of breast tumor using magnetic levitation

In this study, we investigate a novel in vitro model to mimic heterogeneous breast tumors without the use of a scaffold while allowing for cell-cell and tumor-fibroblast interactions. Previous studies have shown that magnetic levitation system under conventional culturing conditions results in the formation of three-dimensional (3D) structures, closely resembling in vivo tissues (fat tissue, vasculature, etc.). Three-dimensional heterogeneous tumor models for breast cancer were designed to effectively model the influences of the tumor microenvironment on drug efficiency. Various breast cancer cells were co-cultured with fibroblasts and then magnetically levitated. Size and cell density of the resulting tumors were measured. The model was phenotypically compared to in vivo tumors and examined for the presence of ECM proteins. Lastly, the effects of tumor stroma in the 3D in vitro model on drug transport and efficiency were assessed. Our data suggest that the proposed 3D in vitro breast tumor is advantageous due to the ability to: (1) form large-sized (millimeter in diameter) breast tumor models within 24 h; (2) control tumor cell composition and density; (3) accurately mimic the in vivo tumor microenvironment; and (4) test drug efficiency in an in vitro model that is comparable to in vivo tumors.

Condurango glycoside-rich components stimulate DNA damage-induced cell cycle arrest and ROS-mediated caspase-3 dependent apoptosis through inhibition of cell-proliferation in lung cancer, in vitro and in vivo

Chemotherapeutic potential of Condurango glycoside-rich components (CGS) was evaluated in NSCLC, in vitro and in BaP-intoxicated rats, in vivo. NSCLC cells were treated with different concentrations of CGS to test their effect on cell viability. Cellular morphology, DNA-damage, AnnexinV-FITC/PI, cell cycle regulation, ROS-accumulation, MMP, and expressions of related signalling genes were critically analysed. 0.22 μg/μl CGS (IC₅₀ dose at 24 h) was selected for the study. CGS-induced apoptosis via DNA damage was evidenced by DNA-ladder formation, increase of AnnexinV-positive cells, cell cycle arrest at subG0/G1 and differential expressions of apoptotic genes. ROS-elevation and MMP-depolarization with significant caspase-3 activation might lead to apoptotic cell death. Anti-proliferative activity was confirmed by EGFR-expression modulation. ROS accumulation and DNA-nick formation with tissue damage-repair activity after post-cancerous CGS treatment, in vivo, supported the in vitro findings. Overall results advocate considerable apoptosis-inducing potential of CGS against NSCLC, validating its use against lung cancer by CAM practitioners.

Understanding the impact of 2D and 3D fibroblast cultures on in vitro breast cancer models

The utilization of 3D, physiologically relevant in vitro cancer models to investigate complex interactions between tumor and stroma has been increasing. Prior work has generally focused on the cancer cells and, the role of fibroblast culture conditions on tumor-stromal cell interactions is still largely unknown. Here, we focus on the stroma by comparing functional behaviors of human mammary fibroblasts (HMFs) cultured in 2D and 3D and their effects on the invasive progression of breast cancer cells (MCF10DCIS.com). We identified increased levels of several paracrine factors from HMFs cultured in 3D conditions that drive the invasive transition. Using a microscale co-culture model with improved compartmentalization and sensitivity, we demonstrated that HMFs cultured in 3D intensify the promotion of the invasive progression through the HGF/c-Met interaction. This study highlights the importance of the 3D stromal microenvironment in the development of multiple cell type in vitro cancer models.

Inflammatory breast cancer: New factors contribute to disease etiology: A review

Inflammatory breast cancer (IBC) is a highly metastatic and fatal form of breast cancer. In fact, IBC is characterized by specific morphological, phenotypic, and biological properties that distinguish it from non-IBC. The aggressive behavior of IBC being more common among young women and the low survival rate alarmed researchers to explore the disease biology. Despite the basic and translational studies needed to understand IBC disease biology and identify specific biomarkers, studies are limited by few available IBC cell lines, experimental models, and paucity of patient samples. Above all, in the last decade, researchers were able to identify new factors that may play a crucial role in IBC progression. Among identified factors are cytokines, chemokines, growth factors, and proteases. In addition, viral infection was also suggested to participate in the etiology of IBC disease. In this review, we present novel factors suggested by different studies to contribute to the etiology of IBC and the proposed new therapeutic insights.

Bioengineering embryonic stem cell microenvironments for exploring inhibitory effects on metastatic breast cancer cells

The recreation of an in vitro microenvironment to understand and manipulate the proliferation and migration of invasive breast cancer cells may allow one to put a halt to their metastasis capacity. Invasive cancer cells have been linked to embryonic stem (ES) cells as they possess certain similar characteristics and gene signatures. Embryonic microenvironments have the potential to reprogram cancer cells into a less invasive phenotype and help elucidate tumorigenesis and metastasis. In this study, we explored the feasibility of reconstructing embryonic microenvironments using mouse ES cells cultured in alginate hydrogel and investigated the interactions of ES cells and highly invasive breast cancer cells in 2D, 2&1/2D, and 3D cultures. Results showed that mouse ES cells inhibited the growth and tumor spheroid formation of breast cancer cells. The mouse ES cell microenvironment was further constructed and optimized in 3D alginate hydrogel microbeads, and co-cultured with breast cancer cells. Migration analysis displayed a significant reduction in the average velocity and trajectory of breast cancer cell locomotion compared to control, suggesting that bioengineered mouse ES cell microenvironments inhibited the proliferation and migration of breast cancer cells. This study may act as a platform to open up new options to understand and harness tumor cell plasticity and develop therapeutics for metastatic breast cancer.

Parallel Formation of Three-Dimensional Spheroid Using Microrotational Flow

We propose three-dimensional (3D) spheroid formation involving perfusion and a lab-on-a-chip containing spheroid-forming chamber arrays. Cells are collected forming a spheroid in the chamber in microrotation. We previously reported a single chamber form hepatic spheroids 130 to 430 µm in diameter, controlling size by varying chamber diameter and cell density. Here, we scaled the system up by a factor of 10 while maintaining size control of 180±30 µm in diameter. Results were comparable to those using a single-chamber device. Long-term culture confirmed that cells in the spheroid maintained viability and diameters did not change after 24 hours. The system is readily applicable for creating size-controlled spheroids ensuring reliable, predictable in vitro data for drug screening and biological research.