Adsorption and desorption characteristics of arsenic onto ceria nanoparticles

A review on arsenic pollution, toxicity, health risks, and management strategies using nanoremediation approaches

OBJECTIVES

Over 50 countries are affected by arsenic contamination. The problem is becoming worse as the number of affected people increases and new sites are reported globally.

CONTENT

Various human activities have increased arsenic pollution, notably in both terrestrial and aquatic environments. Contamination of our water and soil by arsenic poses a threat to our environment and natural resources. Arsenic poisoning harms several physiological systems and may cause cancer and death. Excessive exposure may cause toxic build-up in human and animal tissues. Arsenic-exposed people had different skin lesion shapes and were vulnerable to extra arsenic-induced illness risks. So far, research shows that varying susceptibility plays a role in arsenic-induced diseases. Several studies have revealed that arsenic is a toxin that reduces metabolic activities. Diverse remediation approaches are being developed to control arsenic in surrounding environments.

SUMMARY AND OUTLOOK

A sustainable clean-up technique (nanoremediation) is required to restore natural equilibrium. More research is therefore required to better understand the biogeochemical processes involved in removing arsenic from soils and waters.

Influence on the release of arsenic and tungsten from sediment, and effect on other heavy metals and microorganisms by ceria nanoparticle capping

In this study, ceria nanoparticle (CNP) was used as a capping agent to investigate the efficiency and mechanism of simultaneously controlling the release of sediment internal Arsenic (As) and tungsten (W). The results of incubation experiment demonstrated that CNP capping reduced soluble As and W by 81.80% and 97.97% in overlying water, respectively; soluble As and W by 65.64% and 60.13% in pore water, respectively; and labile As and W in sediment by 45.20% and 53.20%, respectively. The main mechanism of CNP controlling sediment internal As and W was through adsorption via ligand exchange and inner-sphere complexation, as determined through adsorption experiments, XPS and FIRT spectra analysis. Besides, CNP also acted as an oxidant, facilitating the oxidation of AsⅢ to AsV and thereby enhancing the adsorption of soluble As. Additionally, sediment As and W fractions experiments demonstrated that the immobilization of As and W with CNP treatment via transforming mobile to stable fractions was another mechanism inhibiting sediment As and W release. The obtained significant positive correlation between soluble As/W and Fe/Mn, labile As/W and Fe/Mn indicated that iron (Fe) and manganese (Mn) oxidation, influenced by CNP, serve as additional mechanisms. Moreover, Fe redox plays a crucial role in controlling internal As and W, while Mn redox plays a more significant role in controlling As compared to W. Meanwhile, CNP capping effectively prevented the release of As and W by reducing the activity of microorganisms that degrade Fe-bound As and W and reduced the release risk of V, Cr, Co, Ni, and Zn from sediments. Overall, this study proved that CNP was a suitable capping agent for simultaneously controlling the release of As and W from sediment.

Abiogenic silicon: Interaction with potentially toxic elements and its ecological significance in soil and plant systems

Abiogenic silicon (Si), though deemed a quasi-nutrient, remains largely inaccessible to plants due to its prevalence within mineral ores. Nevertheless, the influence of Si extends across a spectrum of pivotal plant processes. Si emerges as a versatile boon for plants, conferring a plethora of advantages. Notably, it engenders substantial enhancements in biomass, yield, and overall plant developmental attributes. Beyond these effects, Si augments the activities of vital antioxidant enzymes, encompassing glutathione (GSH), catalase (CAT), superoxide dismutase (SOD), and peroxidase (POD), among others. It achieves through the augmentation of reactive oxygen species (ROS) scavenging gene expression, thus curbing the injurious impact of free radicals. In addition to its effects on plants, Si profoundly ameliorates soil health indicators. Si tangibly enhances soil vitality by elevating soil pH and fostering microbial community proliferation. Furthermore, it exerts inhibitory control over ions that could inflict harm upon delicate plant cells. During interactions within the soil matrix, Si readily forms complexes with potentially toxic metals (PTEs), encapsulating them through Si-PTEs interactions, precipitative mechanisms, and integration within colloidal Si and mineral strata. The amalgamation of Si with other soil amendments, such as biochar, nanoparticles, zeolites, and composts, extends its capacity to thwart PTEs. This synergistic approach enhances soil organic matter content and bolsters overall soil quality parameters. The utilization of Si-based fertilizers and nanomaterials holds promise for further increasing food production and fortifying global food security. Besides, gaps in our scientific discourse persist concerning Si speciation and fractionation within soils, as well as its intricate interplay with PTEs. Nonetheless, future investigations must delve into the precise functions of abiogenic Si within the physiological and biochemical realms of both soil and plants, especially at the critical juncture of the soil-plant interface. This review seeks to comprehensively address the multifaceted roles of Si in plant and soil systems during interactions with PTEs.

Enhanced arsenite removal in aqueous with Fe-Ce-Cu ternary oxide nanoparticle

Arsenite is both more harmful and challenging to get out of water than arsenate. For enhanced As (III) removal, a ternary oxide nanoparticle (FCCTO) mainly composed of iron(Fe), with a small proportion of cerium(Ce) and copper(Cu) was created using a coprecipitation-calcination process. FCCTO was found to be effective in removing As (III) from water, with factors such as adsorbent dose, pH, temperature, and coexisting anions influencing its efficiency. The surface area of FCCTO reached 180.2 m2/g and the doping significantly increased its pore volume and diameter. The adsorption process on FCCTO was endothermic and spontaneous. Ce and Cu in FCCTO were able to efficiently oxidize 81.3% As (III) to As(V). Abundant sites were provided by surface hydroxyl groups for arsenic adsorption. The maximal As(III) adsorption capacity of this adsorbent under the synergistic impact of oxidation and adsorption was 101.5 mg/g. After five cycles, the FCCTO's As(III) adsorption rate dropped to 60% as a result of tetravalent Ce consumption. Surface complexation, redox, and adsorption all had a significant impact on the adsorption process. Overall, FCCTO was an excellent adsorbent with benefits of being facile fabrication, environmentally, recyclable, and having a high As(III) adsorption capacity.

Magnesium ferrite-nitrogen-doped graphene oxide nanocomposite: effective adsorptive removal of lead(II) and arsenic(III)

Magnetic nanocomposites have received immense interest as adsorbents for water decontamination. This paper presents adsorptive properties of nitrogen-doped graphene oxide (N-GO) with magnesium ferrite (MgFe₂O₄) magnetic nanocomposite for removing lead(II) (Pb(II)and arsenite As(III) ions. Transmission electron microscope (TEM) image of synthesized nanocomposite revealed the wrinkled sheets of N-GO containing MgFe₂O₄ nanoparticles (NPs) with particle size of 5-15 nm distributed over its surface. This nanocomposite displayed higher BET surface area (72.2 m²g^-1) than that of pristine MgFe₂O₄ NPs (38.4 m²g^-1). Adsorption on the nanocomposite could be described by the Langmuir isotherm with the maximum adsorption capacities were 930 mg/g, and 64.1 mg/g for Pb(II) and As(III), respectively. Whereas, maximum removal efficiencies were observed to be 99.7 [Formula: see text] 0.2% and 93.5 [Formula: see text] 0.1% for Pb(II) and As(III), respectively. The study on the effect of coexisting anions on the adsorption of metal ions showed that the phosphate ions were potential competitors of Pb(II) and As(III) ions to adsorb on the nanocomposite. Significantly, the investigation on adsorption of metal ion in the presence of coexisting heavy metal ions indicated the preferential adsorption of Pb(II) ions as compared to Cd(II), Zn(II) and Ni(II) ions. The effectiveness of the nanocomposite to remove the metal ions in electroplating wastewater was demonstrated.

Nanomaterials as adsorbents for As(III) and As(V) removal from water: A review

Freshwater demand will rise in the next couple of decades, with an increase in worldwide population growth and industrial development. The development activities, on one side, have increased the freshwater demand. However, the ground water has been degraded. Among the various organic and inorganic contaminants, arsenic is one of the most toxic elements. Arsenic contamination in ground waters is a major issue worldwide, especially in South and Southeast Asia. Various methods have been applied to provide a remedy to arsenic contamination, including adsorption, ion exchange, oxidation, coagulation-precipitation and filtration, and membrane filtration. Out of these methods, adsorption of As(III)/As(V) using nanomaterials and biopolymers has been used on a wide scale. The present review focuses on recently used nanomaterials and biopolymer composites for As(III)/As(V) sorptive removal. As(III)/As(V) adsorption mechanisms have been explored for various sorbents. The impacts of environmental factors such as pH and co-existing ions on As(III)/As(V) removal, have been discussed. Comparison of various nanosorbents and biopolymer composites for As(III)/As(V) adsorption and regeneration of exhausted materials has been included. Overall, this review will be useful to understand the sorption mechanisms involved in As(III)/As(V) removal by nanomaterials and biopolymer composites and their comparative sorption performances.

Investigation of kinetics and adsorption isotherm for fluoride removal from aqueous solutions using mesoporous cerium-aluminum binary oxide nanomaterials

Herein, we report the synthesis of Ce–Al (1 : 1, 1 : 3, 1 : 6, and 1 : 9) binary oxide nanoparticles by a simple co-precipitation method at room temperature to be applied for defluoridation of an aqueous solution. The characterization of the synthesized nanomaterial was performed by XRD (X-ray diffraction), FTIR (Fourier transform infrared) spectroscopy, TGA/DTA (thermogravimetric analysis/differential thermal analysis), BET (Brunauer–Emmett–Teller) surface analysis, and SEM (scanning electron microscopy). Ce–Al binary oxides in 1 : 6 molar concentration were found to have the highest surface area of 110.32 m² g⁻¹ with an average crystallite size of 4.7 nm, which showed excellent defluoridation capacity. The adsorptive capacity of the prepared material towards fluoride removal was investigated under a range of experimental conditions such as dosage of adsorbents, pH, and initial fluoride concentration along with adsorption isotherms and adsorption kinetics. The results indicated that fluoride adsorption on cerium–aluminum binary metal oxide nanoparticles occurred within one hour, with maximum adsorption occurring at pH 2.4. The experimental data obtained were studied using Langmuir, Freundlich, and Temkin adsorption isotherm models. The nanomaterial showed an exceptionally high adsorbent capacity of 384.6 mg g⁻¹. Time-dependent kinetic studies were carried out to establish the mechanism of the adsorption process by pseudo-first-order kinetics, pseudo-second-order kinetics, and Weber–Morris intraparticle diffusion kinetic models. The results indicated that adsorption processes followed pseudo-second-order kinetics. This study suggests that cerium–aluminum binary oxide nanoparticles have good potential for fluoride removal from highly contaminated aqueous solutions.

Mesoporous Ce–Al binary oxide nanomaterials prepared with a surface area of 110.32 m² g⁻¹ showed defluoridation capacity at pH 2.4, exhibited maximum adsorption capacity of 384.6 mg g⁻¹ and a removal efficiency of 91.5% at a small dose of nanoadsorbent.

Selective biosorption mechanism of methylene blue by a novel and reusable sugar beet pulp cellulose/sodium alginate/iron hydroxide composite hydrogel

A cellulose-based sodium alginate/iron hydroxide (C/SA/Fe) composite hydrogel was fabricated by using epichlorohydrin as cross-linking agent as an effective adsorbent for dye. The physicochemical structure of the C/SA/Fe hydrogel was characterized by SEM, FTIR, XRD and TG. The adsorption performance for the removal of methylene blue (MB) was investigated. In addition, the selective adsorption of cationic dye was also studied. The FTIR analysis revealed that the Fe(OH)₃ colloidal particles was successfully combined in the cellulose/sodium alginate hydrogel. The modified hydrogel had better adsorption performance, and the maximum adsorption capacity of C/SA/Fe0.5 for MB was 105.93 mg/g according to the fitting results of adsorption isotherm. The kinetic study showed that MB adsorption of C/SA/Fe was more consistent with the pseudo-second-order model, and the adsorption of MB in C/SA/Fe was dominated by chemisorption mechanism such as ion exchange or electron sharing. The adsorption data fits well with the Langmuir model. Thermodynamics analysis showed that the MB adsorption by C/SA/Fe was exothermic, spontaneous, favorable and feasible. After five adsorption-desorption cycles, the adsorption capacity was almost unchanged. So, the C/SA/Fe hydrogel is a potential material in the field of the recovery of agricultural by-products or other bio-based cellulose, or environmental protection, etc.

Millimeter-Shaped Metal-Organic Framework/Inorganic Nanoparticle Composite as a New Adsorbent for Home Water-Purification Filters

Heavy-metal contamination of water is a global problem with an especially severe impact in countries with old or poorly maintained infrastructure for potable water. An increasingly popular solution for ensuring clean and safe drinking water in homes is the use of adsorption-based water filters, given their affordability, efficacy, and simplicity. Herein, we report the preparation and functional validation of a new adsorbent for home water filters, based on our metal-organic framework (MOF) composite containing UiO-66 and cerium(IV) oxide (CeO₂) nanoparticles. We began by preparing CeO₂@UiO-66 microbeads and then encapsulating them in porous polyethersulfone (PES) granules to obtain millimeter-scale CeO₂@UiO-66@PES granules. Next, we validated these granules as an adsorbent for the removal of metals from water by substituting them for the standard adsorbent (ion-exchange resin spheres) inside a commercially available water pitcher from Brita. We assessed their performance according to the American National Standards Institute (ANSI) guideline 53-2019, "Drinking Water Treatment Units-Health Effects Standard". Remarkably, a pitcher loaded with a combination of our CeO₂@UiO-66@PES granules and activated carbon at standard ratios met the target reduction thresholds set by NSF/ANSI 53-2019 for all the metals tested: As(III), As(V), Cd(II), Cr(III), Cr(VI), Cu(II), Hg(II), and Pb(II). Throughout the test, the modified pitcher proved to be robust and stable. We are confident that our findings will bring MOF-based adsorbents one step closer to real-world use.

Advanced application of nano-technological and biological processes as well as mitigation options for arsenic removal

Arsenic (As) removal is a huge challenge, since several million people are potentially exposed (>10 μg/L World Health Organization guideline limit) through As contaminated drinking water worldwide. Review attempts to address the present situation of As removal, considering key topics on nano-technological and biological process and current progress and future perspectives of possible mitigation options have been evaluated. Different physical, chemical and biological methods are available to remove As from contaminated water/soil/wastes, where removal efficiency mainly depends on absorbent type, initial adsorbate concentration, speciation and interfering species. Oxidation is an important pretreatment step in As removal, which is generally achieved by several media such as O₂/O₃, HClO, KMnO₄ and H₂O₂. The Fe-based-nanomaterials (α/β/γ-FeOOH, Fe₂O₃/Fe₃O₄-γ-Fe₂O₃), Fe-based-composite-compounds, activated-Al₂O₃, HFO, Fe-Al₂O₃, Fe₂O₃-impregnated-graphene-aerogel, iron-doped-TiO₂, aerogel-based- CeTiO₂, and iron-oxide-coated-manganese are effective to remove As from contaminated water. Biological processes (phytoremediation/microbiological) are effective and ecofriendly for As removal from water and/or soil environment. Microorganisms remove As from water, sediments and soil by metabolism, detoxification, oxidation-reduction, bio-adsorption, bio-precipitation, and volatilization processes. Ecofriendly As mitigation options can be achieved by utilizing an alternative As-safe-aquifer, surface-water or rainwater-harvesting. Application of hybrid (biological with chemical and physical process) and Best-Available-Technologies (BAT) can be the most effective As removal strategy to remediate As contaminated environments.

MOF-Beads Containing Inorganic Nanoparticles for the Simultaneous Removal of Multiple Heavy Metals from Water

Pollution of water with heavy metals is a global environmental problem whose impact is especially severe in developing countries. Among water-purification methods, adsorption of heavy metals has proven to be simple, versatile, and cost-effective. However, there is still a need to develop adsorbents with a capacity to remove multiple metal pollutants from the same water sample. Herein, we report the complementary adsorption capacities of metal-organic frameworks (here, UiO-66 and UiO-66-(SH)₂) and inorganic nanoparticles (iNPs; here, cerium-oxide NPs) into composite materials. These adsorbents, which are spherical microbeads generated in one step by continuous-flow spray-drying, efficiently and simultaneously remove multiple heavy metals from water, including As(III and V), Cd(II), Cr(III and VI), Cu(II), Pb(II), and Hg(II). We further show that these microbeads can be used as a packing material in a prototype of a continuous-flow water treatment system, in which they retain their metal-removal capacities upon regeneration with a gentle acidic treatment. As proof-of-concept, we evaluated these adsorbents for purification of laboratory water samples prepared to independently recapitulate each of two strongly polluted rivers: the Bone (Indonesia) and Buringanga (Bangladesh) rivers. In both cases, our microbeads reduced the levels of all the metal contaminants to below the corresponding permissible limits established by the World Health Organization (WHO). Moreover, we demonstrated the capacity of these microbeads to lower levels of Cr(VI) in a water sample collected from the Sarno River (Italy). Finally, to create adsorbents that could be magnetically recovered following their use in water purification, we extended our spray-drying technique to simultaneously incorporate two types of iNPs (CeO₂ and Fe₃O₄) into UiO-66-(SH)₂, obtaining CeO₂/Fe₃O₄@UiO-66-(SH)₂ microbeads that adsorb heavy metals and are magnetically responsive.

Analysis of circulating non-coding RNAs in a non-invasive and cost-effective manner

Non-coding RNAs (ncRNAs) participate in regulation of gene expression, and are highly relevant to pathological development. They are found to be stably present in diverse body fluids, including those in the circulatory system, which can be sampled non-invasively for clinical tests. Thus, circulating ncRNAs have great potential to be disease biomarkers. However, tremendous efforts are desired to discover and utilize ncRNAs as biomarkers in clinical diagnosis, calling for technological advancement in analysis of circulating ncRNAs in biospecimens. Hence, this review summarizes the recent developments in this area, highlighting the works devoted to cancer diagnosis and prognosis. Three main directions are focused: 1) Extraction and purification of ncRNAs from body fluids; 2) Quantification of the purified circulating ncRNAs; and 3) Microfluidic platforms for integration of both steps to enable point-of-care diagnostics. These technologies have laid a solid foundation to move forward the applications of circulating ncRNAs in disease diagnosis and cure.

Single-Particle Investigation of Environmental Redox Processes of Arsenic on Cerium Oxide Nanoparticles by Collision Electrochemistry

Quantification of chemical reactions of nanoparticles (NPs) and their interaction with contaminants is a fundamental need to the understanding of chemical reactivity and surface chemistry of NPs released into the environment. Herein, we propose a novel strategy employing single-particle electrochemistry showing that it is possible to measure reactivity, speciation, and loading of As³⁺ on individual NPs, using cerium oxide (CeO₂) as a model system. We demonstrate that redox reactions and adsorption processes can be electrochemically quantified with high sensitivity via the oxidation of As³⁺ to As⁵⁺ at 0.8 V versus Ag/AgCl or the reduction of As³⁺ to As⁰ at -0.3 V (vs Ag/AgCl) generated by collisions of single particles at an ultramicroelectrode. Using collision electrochemistry, As³⁺ concentrations were determined in basic conditions showing a maximum adsorption capacity at pH 8. In acidic environments (pH < 4), a small fraction of As³⁺ was oxidized to As⁵⁺ by surface Ce⁴⁺ and further adsorbed onto the CeO₂ surface as a As⁵⁺ bidentate complex. The frequency of current spikes (oxidative or reductive) was proportional to the concentration of As³⁺ accumulated onto the NPs and was found to be representative of the As³⁺ concentration in solution. Given its sensitivity and speciation capability, the method can find many applications in the analytical, materials, and environmental chemistry fields where there is a need to quantify the reactivity and surface interactions of NPs. This is the first study demonstrating the capability of single-particle collision electrochemistry to monitor the interaction of heavy metal ions with metal oxide NPs. This knowledge is critical to the fundamental understanding of the risks associated with the release of NPs into the environment for their safe implementation and practical use.

Adsorption of Aqueous As (III) in Presence of Coexisting Ions by a Green Fe-Modified W Zeolite

The high toxicity of arsenite and the difficulty to remove it is one of the main challenges for water treatment. In the present work the surface of a low cost zeolite was modified by chemical treatment with a ferrous chloride to enhance its arsenite adsorption capacity. The effect of pH, ions coexistence, concentration, temperature and dosage was studied on the adsorption process. Additionally, the Fe-modified W zeolite was aged by an accelerated procedure and the regeneration of the exhausted zeolite was demonstrated. The Fe-modified W zeolite was stable in the pH range of 3 to 8 and no detriment to its arsenite removal capacity was observed in the presence of coexisting ions commonly found in underground water. The studies showed that the adsorption of As (III) on Fe-modified W zeolite is a feasible, spontaneous and endothermic process and it takes place by chemical bonding. The exhausting process proved the adsorption of 0.20 mg g−1 of As (III) by the Fe-modified W zeolite and this withstand at least five aging cycles without significant changes of its arsenite adsorption capacity. Fe-modified W zeolite prepared from fly ash might be a green and low-cost alternative for removal of As (III) from groundwater.

Cerium dioxide (CeO2) nanoparticles decrease arsenite (As(III)) cytotoxicity to 16HBE14o- human bronchial epithelial cells

The production and application of engineered nanoparticles (NPs) are increasing in demand with the rapid development of nanotechnology. However, there are concerns that some of these novel materials could lead to emerging environmental and health problems. Some NPs are able to facilitate the transport of contaminants into cells/organisms via a "Trojan Horse" effect which enhances the toxicity of the adsorbed materials. In this work, we evaluated the toxicity of arsenite (As(III)) adsorbed onto cerium dioxide (CeO2) NPs to human bronchial epithelial cells (16HBE14o-) using the xCELLigence real time cell analyzing system (RTCA). Application of 0.5 mg/L As(III) resulted in 81.3% reduction of cell index (CI, an RTCA measure of cell toxicity) over 48 h when compared to control cells exposed to medium lacking As(III). However, when the cells were exposed to 0.5 mg/L As(III) in the presence of CeO2 NPs (250 mg/L), the CI was only reduced by 12.9% compared to the control. The CeO2 NPs had a high capacity for As(III) adsorption (20.2 mg/g CeO2) in the bioassay medium, effectively reducing dissolved As(III) in the aqueous solution and resulting in reduced toxicity. Transmission electron microscopy was used to study the transport of CeO2 NPs into 16HBE14o- cells. NP uptake via engulfment was observed and the internalized NPs accumulated in vesicles. The results demonstrate that dissolved As(III) in the aqueous solution was the decisive factor controlling As(III) toxicity of 16HBE14o- cells, and that CeO2 NPs effectively reduced available As(III) through adsorption. These data emphasize the evaluation of mixtures when assaying toxicity.

Nanofibers of resorcinol-formaldehyde for effective adsorption of As (III) ions from mimicked effluents

In the present study, the core-shell structured RF/PVA nanofibers have been developed and used for the adsorption of As³⁺ ions from the mimicked liquid effluents. Efficient-facile fabrication of the structured nanofibers (300-417 nm diameter) was accomplished using facile electrospinning technique. Chi parameter (χ = 25.56) and free energy of mixing (E_mix = 17.19 kcal/mol) calculated via molecular dynamics simulations depicted compatibility of the polymeric system resulting supermolecular core-shell nanofibers, whose adsorption results were also supported by the FE-SEM, FT-IR, and UV-VIS spectroscopy analysis. The adsorption analysis was performed using both linear and non-linear regression methods, for kinetic models and adsorption isotherms. The developed nanofibers demonstrated an adsorption capacity of 11.09 mg/g at a pH of 7, and an adsorption efficiency of 97.46% on protracted exposure, which is even adaptable at high temperatures with 93.1% reclamation. FE-SEM analysis and FT-IR spectra confirm the adsorption of As (III) ions on RF/PVA nanofibers and the presence of embedded hydrophilic oxygen sites for metal ion adsorption. The developed RF/PVA nanofibers demonstrate scalability in fabrication, low-cost, recycling, and less solid waste generation, depicting the large-scale applicability in removing arsenic ions from effluent waste. Graphical Abstract ᅟ.

Graphene-Supported Spinel CuFe₂O₄ Composites: Novel Adsorbents for Arsenic Removal in Aqueous Media

A graphene nanoplate-supported spinel CuFe₂O₄ composite (GNPs/CuFe₂O₄) was successfully synthesized by using a facile thermal decomposition route. Scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Electron Dispersive Spectroscopy (EDS), X-ray diffraction (XRD) and X-ray Photoelectron Spectroscopy (XPS) were employed to characterize the prepared composite. The arsenic adsorption behavior of the GNPs/CuFe₂O₄ composite was investigated by carrying out batch experiments. Both the Langmuir and Freundlich models were employed to describe the adsorption isotherm, where the sorption kinetics of arsenic adsorption by the composite were found to be pseudo-second order. The selectivity of the adsorbent toward arsenic over common metal ions in water was also demonstrated. Furthermore, the reusability and regeneration of the adsorbent were investigated by an assembled column filter test. The GNPs/CuFe₂O₄ composite exhibited significant, fast adsorption of arsenic over a wide range of solution pHs with exceptional durability, selectivity, and recyclability, which could make this composite a very promising candidate for effective removal of arsenic from aqueous solution. The highly sensitive adsorption of the material toward arsenic could be potentially employed for arsenic sensing.

Fabrication of a GNP/Fe-Mg Binary Oxide Composite for Effective Removal of Arsenic from Aqueous Solution

Graphene nanoplates (GNPs) can be used as a platform for homogeneous distribution of adsorbent nanoparticles to improve electron exchange and ion transport for heavy-metal adsorption. In this study, we report a facile thermal decomposition route to fabricate a graphene-supported Fe-Mg oxide composite. The prepared composite was characterized using scanning electron microscopy, transmission electron microscopy, energy-dispersive spectrometry, X-ray diffraction, and X-ray photoelectron spectroscopy. Batch experiments were carried out to evaluate the arsenic adsorption behavior of the GNP/Fe-Mg oxide composite. Both the Langmuir and Freundlich models were employed to describe the adsorption isotherm, in which the sorption kinetics of the arsenic adsorption process by the composite was found to be pseudo-second-order. Furthermore, the reusability and regeneration of the adsorbent were investigated by an assembled-column filter test. The GNP/Fe-Mg oxide composite exhibited significant fast adsorption of arsenic over a wide range of solution pHs, with exceptional durability and recyclability, which could make this composite a very promising candidate for effective removal of arsenic from aqueous solutions.

Lessons learned: Are engineered nanomaterials toxic to terrestrial plants?

The expansion of nanotechnology and its ubiquitous applications has fostered unavoidable interaction between engineered nanomaterials (ENMs) and plants. Recent research has shown ambiguous results with regard to the impact of ENMs in plants. On one hand, there are reports that show hazardous effects, while on the other hand, some reports highlight positive effects. This uncertainty whether the ENMs are primarily hazardous or whether they have a potential for propitious impact on plants, has raised questions in the scientific community. In this review, we tried to demystify this ambiguity by citing various exposure studies of different ENMs (nano-Ag, nano-Au, nano-Si, nano-CeO2, nano-TiO2, nano-CuO, nano-ZnO, and CNTs, among others) and their effects on various groups of plant families. After scrutinizing the most recent literature, it seems that the divergence in the research results may be possibly attributed to multiple factors such as ENM properties, plant species, soil dynamics, and soil microbial community. The analysis of the literature also suggests that there is a knowledge gap on the effects of ENMs towards changes in color, texture, shape, and nutritional aspects on ENM exposed plants.

The global menace of arsenic and its conventional remediation - A critical review

Arsenic is a ubiquitous element found in the earth crust with a varying concentration in the earth soil and water. Arsenic has always been under the scanner due to its toxicity in human beings. Contamination of arsenic in drinking water, which generally finds its source from arsenic-containing aquifers; has severely threatened billions of people all over the world. Arsenic poisoning is worse in Bangladesh where As(III) is abundant in waters of tube wells. Natural occurrence of arsenic in groundwater could result from both, oxidative and reductive dissolution. Geothermally heated water has the potential to liberate arsenic from surrounding rocks. Inorganic arsenic has been found to have more toxicity than the organic forms of arsenic. MMA and DMA are now been considered as the organic arsenic compounds having the potential to impair DNA and that is why MMA and DMA are considered as carcinogens. Endless efforts of researchers have elucidated the source, behavior of arsenic in various parts of the environment, mechanism of toxicity and various remediation processes; although, there are lots of areas still to be addressed. In this article, attempts have been made to lay bare an overview of geochemistry, toxicity and current removal techniques of arsenic together.

Monodispersed hierarchical γ-AlOOH/Fe(OH)3 micro/nanoflowers for efficient removal of heavy metal ions from water

Monodispersed γ-AlOOH/Fe(OH)₃ with hierarchical structures have been prepared, which show an excellent performance for As(v) and Cr(vi) removal.

Technologies for Arsenic Removal from Water: Current Status and Future Perspectives

This review paper presents an overview of the available technologies used nowadays for the removal of arsenic species from water. Conventionally applied techniques to remove arsenic species include oxidation, coagulation-flocculation, and membrane techniques. Besides, progress has recently been made on the utility of various nanoparticles for the remediation of contaminated water. A critical analysis of the most widely investigated nanoparticles is presented and promising future research on novel porous materials, such as metal organic frameworks, is suggested.

Arsenic removal by nanoparticles: a review

Contamination of natural waters with arsenic, which is both toxic and carcinogenic, is widespread. Among various technologies that have been employed for arsenic removal from water, such as coagulation, filtration, membrane separation, ion exchange, etc., adsorption offers many advantages including simple and stable operation, easy handling of waste, absence of added reagents, compact facilities, and generally lower operation cost, but the need for technological innovation for water purification is gaining attention worldwide. Nanotechnology is considered to play a crucial role in providing clean and affordable water to meet human demands. This review presents an overview of nanoparticles and nanobased adsorbents and its efficiencies in arsenic removal from water. The paper highlights the application of nanomaterials and their properties, mechanisms, and advantages over conventional adsorbents for arsenic removal from contaminated water.

Preparation and Characterization of Homopolymer Polyacrylonitrile-Based Fibrous Sorbents for Arsenic Removal

This research investigated the modification of homopolymer polyacrylonitrile (PAN) fibers for use as an adsorbent for removing arsenic from drinking water. Fibers were chemically modified and cross-linked using combinations of hydrazine hydrate and sodium hydroxide (NaOH) before being loaded with ferric hydroxide using two different iron loading procedures. Effects of reagent concentrations and reaction times on degree of chemical modification and fiber properties were investigated using Fourier transform infrared spectroscopy and ion-exchange measurements. Arsenate adsorption was a function of both the iron loading and the properties of the underlying fiber. For fibers treated with only a single reagent, both Fe³⁺ and arsenate adsorption could be understood in terms of ion-exchange properties of the fiber surfaces. However, for fibers treated with both hydrazine and NaOH, the ion-exchange properties of the surface could not explain the Fe³⁺ and arsenate adsorption behavior. The best arsenate removal performance was obtained using the simplest pretreatment procedure of soaking in 10% NaOH at 95°C for 90 min, followed by precipitation coating of ferric hydroxide. This simple preparation procedure involves only two commonly available and inexpensive reagents and can be carried out without any specialized equipment. This suggests that adsorbents based on inexpensive homopolymer PAN fabric may be produced in developing areas of the world where commercial products may not be available.

Evaluation of desorption of Pb (II), Cu (II) and Zn (II) from titanium dioxide nanoparticles

The adsorption-desorption of toxic compounds onto engineered nanoparticles is an important process that governs their potential as sorbents for treatment applications, their toxicity and their environmental risks. This study was aimed to investigate the desorption of Pb (II), Cu (II) and Zn (II) from commercially prepared nano-TiO(2) (anatase) using batch techniques, with the evaluation of isothermal, kinetic and thermodynamic properties. Results showed that desorption was pH dependent and that more than 98% of all metals desorbed at pH 2. Short term kinetic studies were fit with a pseudo second order model and showed that a significant amount of desorption occurred in the first fifteen minutes. Surface complexation modeling determined a trend of adsorption affinity to be Pb > Zn > Cu and with adjustable surface complexation constant (K(int)) provided good fit to the experimental data. The thermodynamic studies found that desorption was exothermic and non-spontaneous in most cases. The XPS study showed that no change in oxidation state occurred due to desorption and suggested that Pb desorption was due to inner-sphere surface complexation. The results suggest three important points that will improve the capabilities of researchers to understand Pb (II), Cu (II) and Zn (II) adsorption-desorption to nano-TiO(2): (1) the desorption of metals was enhanced at lower pH values suggesting its potential to be regenerated for treatment applications; (2) the possible mechanism for adsorption-desorption varies for different metals; and (3) nano-TiO(2) could interact with metals in the environment if released due to their high sorption capacity and reversible adsorption at lower pH values which could affect the fate and behavior of metals in the environment and enhance nanoparticle toxicity.