Bi2Se3 Sensitized TiO2 Nanotube Films for Photogenerated Cathodic Protection of 304 Stainless Steel Under Visible Light

Progress in semiconductor materials for photocathodic protection: Design strategies and applications in marine corrosion protection

Metal protection of offshore equipment is very complicated owing to the complex marine environment. Photocathodic protection (PCP) is one of the popular research topics in marine metal protection. The protection efficiency of photoanode depends largely on the photoelectric properties of semiconductor materials, viz. the process of charge separation, charge migration, and light absorption. In this article, the enhancement strategies, photoelectrochemical properties, and electron transfer mechanisms of different composites for PCP were reviewed and highlighted. Some photoanodes with unusual and striking properties were emphasized. In addition, the outlooks and challenges of the application of PCP and the design of photoanodes materials are proposed.

Enhanced Photocurrent of the Ag Interfaced Topological Insulator Bi2Se3 under UV- and Visible-Light Radiations

Bi₂Se₃ is a topological quantum material that is used in photodetectors, owing to its narrow bandgap, conductive surface, and insulating bulk. In this work, Ag@Bi₂Se₃ nanoplatelets were synthesized on Al₂O₃(100) substrates in a two-step process of thermal evaporation and magnetron sputtering. X-ray diffractometer (XRD), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and x-ray photoelectron spectroscopy (XPS) revealed that all samples had the typical rhombohedral Bi₂Se₃. Field-emission scanning electron microscopy (FESEM)-energy dispersive x-ray spectroscopy (EDS), XPS, and HRTEM confirmed the presence of the precipitated Ag. The optical absorptance of Bi₂Se₃ nanoplatelets in UV-visible range decreased with the Ag contents. Results of photocurrent measurements under zero-bias conditions revealed that the deposited Ag affected photosensitivity. A total of 7.1 at.% Ag was associated with approximately 4.25 and 4.57 times higher photocurrents under UV and visible light, respectively, than 0 at.% Ag. The photocurrent in Bi₂Se₃ at 7.1 at.% Ag under visible light was 1.72-folds of that under UV light. This enhanced photocurrent is attributable to the narrow bandgap (~0.35 eV) of Bi₂Se₃ nanoplatelets, the Schottky field at the interface between Ag and Bi₂Se₃, the surface plasmon resonance that is caused by Ag, and the highly conductive surface that is formed from Ag and Bi₂Se₃. This work suggests that the appropriate Ag deposition enhances the photocurrent in, and increases the photosensitivity of, Bi₂Se₃ nanoplatelets under UV and visible light.

Supercritically exfoliated Bi2Se3 nanosheets for enhanced photocatalytic hydrogen production by topological surface states over TiO2

Owing to the unique electronic properties of layered materials, topological insulators have interestingly grabbed much attention in the field of photocatalytic water splitting. Nowadays, 2D layered materials were composited with semiconductor photocatalysts, encourage much as it provides enormous active sites and also significantly prevent photogenerated charge recombination. Especially, Bi₂Se₃ possesses exceptional properties like topologically preserved conducting surface states with bulk insulating behavior and high surface area, which provides unconventional electron dynamics, resulting in facile electron transport and effective charge separation to photocatalyst. So far, several methods have been attempted to synthesize few-layered Bi₂Se₃ nanosheets from its bulk crystals. Here, a unique attempt is made and succeeded to exfoliate bulk Bi₂Se₃ to few layered nanosheets via surfactant free supercritical fluid processing using N-Methyl-2-pyrrolidone (NMP) as an exfoliating agent, with a short reaction time of 15 min. The exfoliation of Bi₂Se₃ crystal was confirmed by several characterization techniques, such as XRD, SEM, Raman, and HR-TEM. Furthermore, different weight percentages of exfoliated Bi₂Se₃ sheets/anatase TiO₂ nanoparticles were prepared and examined the photocatalytic activity using glycerol as a hole scavenger. Among them, 15 wt.% Bi₂Se₃ coupled TiO₂ nanocomposite showed enormous hydrogen evolution rate of 84.9 mmol h^-1g^-1_cat, which is 80 times higher than that of TiO₂ nanoparticles. In addition, the photostability of the nanocomposite was also verified, where it retains 94% of activity even after 4 cycles of continuous experiments. The improved rate of H₂ production was understood by theoretical calculations that topologically preserved conducting surface states of co-catalyst, Bi₂Se₃ nanosheets is supported to high mobile and scatter free electrons. It mediates the transport of electrons with TiO₂ nanoparticles that helped the effective charge separation. Thus, it proves a promising candidate for photocatalytic hydrogen production.

Research progress of TiO2 photocathodic protection to metals in marine environment

Corrosion protection has become an important issue as the amount of infrastructure construction in marine environment increased. Photocathodic protection is a promising method to reduce the corrosion of metals, and titanium dioxide (TiO₂) is the most widely used photoanode. This review summarizes the progress in TiO₂ photogenerated protection in recent years. Different types of semiconductors, including sulfides, metals, metal oxides, polymers, and other materials, are used to design and modify TiO₂. The strategy to dramatically improve the efficiency of photoactivity is proposed, and the mechanism is investigated in detail. Characterization methods are also introduced, including morphology testing, light absorption, photoelectrochemistry, and protected metal observation. This review aims to provide a comprehensive overview of TiO₂ development and guide photocathodic protection.

Preparation and Photocathodic Protection Properties of ZnO/TiO2 Heterojunction Film Under Simulated Solar Light

In this work, a novel double layer made of ZnO nanorod arrays and TiO2 nanorod arrays with anticorrosion function were successfully prepared on fluorine-doped tin oxide (FTO) substrate by a simple low-temperature solvothermal method. As compared with the pure TiO2 and pure ZnO film, the combination of the two films presented higher photocathodic protection performance for 316 stainless steel (316 SS) and Q235 carbon steel in 3.5 wt% NaCl solution. The composite film with ZnO nanoparticles layer between ZnO nanorod arrays and TiO2 nanorod arrays exhibited the best photocathodic performance, which lowered the open circuit potential (OCP) of 316 SS and Q235 to -991 mV, -1066 mV, respectively. The results demonstrated that the formation of the uniform heterojunction film and the small difference in band alignment played important roles in the promotion of photocathodic protection performance.

CoPi/Co(OH)₂ Modified Ta₃N₅ as New Photocatalyst for Photoelectrochemical Cathodic Protection of 304 Stainless Steel

In this work, CoPi and Co(OH)₂ nanoparticles were deposited on the surface of Ta₃N₅ nanorod-arrays to yield a novel broad-spectrum response photocatalytic material for 304 stainless steel photocatalytic cathodic protection. The Ta₃N₅ nanorod-arrays were prepared by vapor-phase hydrothermal (VPH) and nitriding processes and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-Vis spectroscopy, respectively, to obtain morphologies, crystal structures, surface compositions, and light response range. In order to analyze the performance improvement mechanism of CoPi/Co(OH)₂ on Ta₃N₅ nanorod-arrays, the electrochemical behavior of modified and unmodified Ta₃N₅ was obtained by measuring the open circuit potential and photocurrent in 3.5 wt% NaCl solution. The results revealed that the modified Ta₃N₅ material better protects 304 stainless steel at protection potentials reaching −0.45 V.