In Situ Electrospinning Iodine-Based Fibrous Meshes for Antibacterial Wound Dressing

In-situ electrospinning PVB/Camellia oil/ZnO-TiO2 nanofibrous membranes with synergistic antibacterial and degradation of ethylene applied in fruit preservation

This work utilizes a handheld electrospinning device to prepare a novel nanofibrous composite membrane in situ for packaging freshness. It can realize pick-and-pack and is easy to operate. The nanofibrous membrane is based on PVB as the matrix material, adding Camellia oil (CO) and ZnO-TiO2 composite nanoparticles (ZT) as the active material. The antimicrobial property of the CO and the photocatalytic activity of the nanoparticles give the material good antimicrobial and ethylene degradation functions. Meanwhile, this nanofibrous membrane has good mechanical properties, suitable moisture permeability and good optical properties. The nanofibrous membrane are suitable for both climacteric and non- climacteric fruits. Its use as a cling film extends the shelf life of strawberries by 4 days and significantly slows the ripening of small tomatoes. Therefore, this nanofibrous membrane has great potential for application in the field of fruit preservation.

Polymer-Based Wound Dressings Loaded with Essential Oil for the Treatment of Wounds: A Review

Wound healing can result in complex problems, and discovering an effective method to improve the healing process is essential. Polymeric biomaterials have structures similar to those identified in the extracellular matrix of the tissue to be regenerated and also avoid chronic inflammation, and immunological reactions. To obtain smart and effective dressings, bioactive agents, such as essential oils, are also used to promote a wide range of biological properties, which can accelerate the healing process. Therefore, we intend to explore advances in the potential for applying hybrid materials in wound healing. For this, fifty scientific articles dated from 2010 to 2023 were investigated using the Web of Science, Scopus, Science Direct, and PubMed databases. The principles of the healing process, use of polymers, type and properties of essential oils and processing techniques, and characteristics of dressings were identified. Thus, the plants Syzygium romanticum or Eugenia caryophyllata, Origanum vulgare, and Cinnamomum zeylanicum present prospects for application in clinical trials due to their proven effects on wound healing and reducing the incidence of inflammatory cells in the site of injury. The antimicrobial effect of essential oils is mainly due to polyphenols and terpenes such as eugenol, cinnamaldehyde, carvacrol, and thymol.

Dendronized Ag/Au Nanomats: Antimicrobial Scaffold for Wound Healing Bandages

Electrospun polymer nanofibers, due to high surface area-to-volume ratio, high porosity, good mechanical strength, and ease of functionalization, appear as promising multifunctional materials for biomedical applications. Thanks to their unidirectional structure, imitating the extracellular matrix (ECM), they can be used as scaffolds for cell adhesion and proliferation. In addition, the incorporation of active groups inside nanofiber can give properties for bactericides. The proposed nanomats incorporate nanoparticles templated within the electrospun nanofibers that prevent infections and stimulate tissue regeneration. The generated hybrid electrospun nanofibers are composed of a copolymer of L-lactide-block-ε-caprolactone (PL-b-CL), 70:30, blended with homopolymer polyvinylpyrrolidone (PVP) and gold (Au) nanoparticles. A low cytotoxicity and slightly increased immunoreactivity, stimulated by the nanomat, are observed. Moreover, the decoration of the hybrid nanomat with dendronized silver nanoparticles (Dend-Ag) improves their antibacterial activity against antibiotic-resistant Pseudomonas aeruginosa. The use of Dend-Ag for decorating offers several functional effects; namely, it enhances the antibacterial properties of the produced nanomats and induces a significant increase within macrophages' cytotoxicity. The unidirectional nanostructures of the generated hybrid nanomats demonstrate unique collective physio-chemical and biological properties suitable for a wide range of biomedical applications. Here, the antibacterial properties facilitate an optimal environment, contributing to accelerated wound healing.

Electrospun organic/inorganic hybrid nanofibers for accelerating wound healing: a review

Electrospun nanofiber membranes hold great promise as scaffolds for tissue reconstruction, mirroring the natural extracellular matrix (ECM) in their structure. However, their limited bioactive functions have hindered their effectiveness in fostering wound healing. Inorganic nanoparticles possess commendable biocompatibility, which can expedite wound healing; nevertheless, deploying them in the particle form presents challenges associated with removal or collection. To capitalize on the strengths of both components, electrospun organic/inorganic hybrid nanofibers (HNFs) have emerged as a groundbreaking solution for accelerating wound healing and maintaining stability throughout the healing process. In this review, we provide an overview of recent advancements in the utilization of HNFs for wound treatment. The review begins by elucidating various fabrication methods for hybrid nanofibers, encompassing direct electrospinning, coaxial electrospinning, and electrospinning with subsequent loading. These techniques facilitate the construction of micro-nano structures and the controlled release of inorganic ions. Subsequently, we delve into the manifold applications of HNFs in promoting the wound regeneration process. These applications encompass hemostasis, antibacterial properties, anti-inflammatory effects, stimulation of cell proliferation, and facilitation of angiogenesis. Finally, we offer insights into the prospective trends in the utilization of hybrid nanofiber-based wound dressings, charting the path forward in this dynamic field of research.

The high-throughput atomization of polymer solutions for fiber synthesis in a single step aided with corona ionizers

Polymer microfibers are ubiquitous structures across virtually all technological fields. Their applications include, for instance, filter media, tissue regeneration, wound healing and dressing, and reinforcement materials. The most effective methods for fabrication of fibrous micro and nanomaterials rely on electric fields to spin a liquid jet into an ultrafine thread that rapidly dries up forming a fiber. Continuous spinning and collection leads to formation of fiber mats. Here we report a robust yet simple approach for the massive production of liquid threads, which upon acquiring electrical charges in-flight are collected downstream in the form of fibers. The entire process takes place on-line in a single step. The liquid threads are produced through the fragmentation of a polymer solution bulk due to a turbulent interaction of a gas-liquid interface in the interior of an engineered device, a so-called Flow Blurring atomizer. The particularity of this approach consists precisely in such vigorous interaction, at the micrometer scale, which triggers a bubbly motion in the interior of the device, that is a "micro-mixing". Subsequently, the threads are passed through ionized air currents, at ambient conditions, and then stretched to sub-micrometer dimensions by electric fields. Polyvinylpyrrolidone (PVP) as well as carbon nanotubes (CNTs) or graphene oxide sheets (GOSs)-containing PVP fibers, with diameters in the range 100-900 nm, were synthesized via this approach. In the cases studied herein the method was operated at liquid flow rates (i.e. production rates) of 0.2 mL/min but it could be readily increased up to a few tens of mL/min. The method requires further improvement and optimization, nevertheless it is a promising alternative for mass production of polymer fibers.

The Preparation and Biological Testing of Novel Wound Dressings with an Encapsulated Antibacterial and Antioxidant Substance

Chronic wounds represent a significant socio-economic problem, and the improvement of their healing is therefore an essential issue. This paper describes the preparation and biological properties of a novel functionalized nanofiber wound dressing consisting of a polycaprolactone nanofiber carrier modified by a drug delivery system, based on the lipid particles formed by 1-tetradecanol and encapsulated gentamicin and tocopherol acetate. The cytotoxicity of extracts was tested using a metabolic activity assay, and the antibacterial properties of the extracts were tested in vitro on the bacterial strains Staphylococcus aureus and Pseudomonas aeruginosa. The effect of the wound dressing on chronic wound healing was subsequently tested using a mouse model. Fourteen days after surgery, the groups treated by the examined wound cover showed a lower granulation, reepithelization, and inflammation score compared to both the uninfected groups, a lower dermis organization compared to the control, a higher scar thickness compared to the other groups, and a higher thickness of hypodermis and bacteria score compared to both the uninfected groups. This work demonstrates the basic parameters of the safety (biocompatibility) and performance (effect on healing) of the dressing as a medical device and indicates the feasibility of the concept of its preparation in outpatient conditions using a suitable functionalization device.

Alkaline Treatment Variables to Characterize Poly(Vinyl Alcohol)/Poly(Vinyl Butyral/Vinyl Alcohol) Blend Films

Novel poly(vinyl alcohol) (PVA)/poly(vinyl butyral–vinyl alcohol) (P(VB-VA)) films with improved hydrophobicity were prepared from poly(vinyl acetate) (PVAc)/poly(vinyl butyral) (PVB) blend films with various mass ratios by saponification in a heterogeneous medium. The successful conversion of PVAc to PVA and PVAc/PVB to PVA/P(VB-VA) films was confirmed by Fourier transform infrared spectrometry, X-ray diffraction, and proton nuclear magnetic resonance analysis. This study also shows that the degree of saponification (DS) depends on the saponification time. The maximum DS of 99.99% was obtained at 96 h of saponification for all films, and the presence of PVB did not affect the DS at saponification times of 48–96 h. The effects of the PVAc/PVB blend ratio before and after saponification were determined by contact angle measurement, and the hydrophobicity was found to increase in both cases with increasing PVB content. Additionally, all the films exhibited improved mechanical properties after saponification, and the treated films possessed an unusual porous and uneven surface, in contrast with the untreated films. The prepared films with improved hydrophobicity can be used for various applications, such as biomaterials, filters, and medical devices.

Recent Progress in Electrospun Polyacrylonitrile Nanofiber-Based Wound Dressing

Bleeding control plays a very important role in worldwide healthcare, which also promotes research and development of wound dressings. The wound healing process involves four stages of hemostasis, inflammation, proliferation and remodeling, which is a complex process, and wound dressings play a huge role in it. Electrospinning technology is simple to operate. Electrospun nanofibers have a high specific surface area, high porosity, high oxygen permeability, and excellent mechanical properties, which show great utilization value in the manufacture of wound dressings. As one of the most popular reactive and functional synthetic polymers, polyacrylonitrile (PAN) is frequently explored to create nanofibers for a wide variety of applications. In recent years, researchers have invested in the application of PAN nanofibers in wound dressings. Research on spun nanofibers is reviewed, and future development directions and prospects of electrospun PAN nanofibers for wound dressings are proposed.

Advances in Electrospun Hybrid Nanofibers for Biomedical Applications

Electrospun hybrid nanofibers, based on functional agents immobilized in polymeric matrix, possess a unique combination of collective properties. These are beneficial for a wide range of applications, which include theranostics, filtration, catalysis, and tissue engineering, among others. The combination of functional agents in a nanofiber matrix offer accessibility to multifunctional nanocompartments with significantly improved mechanical, electrical, and chemical properties, along with better biocompatibility and biodegradability. This review summarizes recent work performed for the fabrication, characterization, and optimization of different hybrid nanofibers containing varieties of functional agents, such as laser ablated inorganic nanoparticles (NPs), which include, for instance, gold nanoparticles (Au NPs) and titanium nitride nanoparticles (TiNPs), perovskites, drugs, growth factors, and smart, inorganic polymers. Biocompatible and biodegradable polymers such as chitosan, cellulose, and polycaprolactone are very promising macromolecules as a nanofiber matrix for immobilizing such functional agents. The assimilation of such polymeric matrices with functional agents that possess wide varieties of characteristics require a modified approach towards electrospinning techniques such as coelectrospinning and template spinning. Additional focus within this review is devoted to the state of the art for the implementations of these approaches as viable options for the achievement of multifunctional hybrid nanofibers. Finally, recent advances and challenges, in particular, mass fabrication and prospects of hybrid nanofibers for tissue engineering and biomedical applications have been summarized.

Parylene C-Based, Breathable Tattoo Electrodes for High-Quality Bio-Potential Measurements

A breathable tattoo electrode for bio-potential recording based on a Parylene C nanofilm is presented in this study. The proposed approach allows for the fabrication of micro-perforated epidermal submicrometer-thick electrodes that conjugate the unobtrusiveness of Parylene C nanofilms and the very important feature of breathability. The electrodes were fully validated for electrocardiography (ECG) measurements showing performance comparable to that of conventional disposable gelled Ag/AgCl electrodes, with no visible negative effect on the skin even many hours after their application. This result introduces interesting perspectives in the field of epidermal electronics, particularly in applications where critical on-body measurements are involved.

Electrospun Nanofibers Revisited: An Update on the Emerging Applications in Nanomedicine

Electrospinning (ES) has become a straightforward and customizable drug delivery technique for fabricating drug-loaded nanofibers (NFs) using various biodegradable and non-biodegradable polymers. One of NF's pros is to provide a controlled drug release through managing the NF structure by changing the spinneret type and nature of the used polymer. Electrospun NFs are employed as implants in several applications including, cancer therapy, microbial infections, and regenerative medicine. These implants facilitate a unique local delivery of chemotherapy because of their high loading capability, wide surface area, and cost-effectiveness. Multi-drug combination, magnetic, thermal, and gene therapies are promising strategies for improving chemotherapeutic efficiency. In addition, implants are recognized as an effective antimicrobial drug delivery system overriding drawbacks of traditional antibiotic administration routes such as their bioavailability and dosage levels. Recently, a sophisticated strategy has emerged for wound healing by producing biomimetic nanofibrous materials with clinically relevant properties and desirable loading capability with regenerative agents. Electrospun NFs have proposed unique solutions, including pelvic organ prolapse treatment, viable alternatives to surgical operations, and dental tissue regeneration. Conventional ES setups include difficult-assembled mega-sized equipment producing bulky matrices with inadequate stability and storage. Lately, there has become an increasing need for portable ES devices using completely available off-shelf materials to yield highly-efficient NFs for dressing wounds and rapid hemostasis. This review covers recent updates on electrospun NFs in nanomedicine applications. ES of biopolymers and drugs is discussed regarding their current scope and future outlook.

Recent Advances in Bioengineered Scaffolds for Cutaneous Wound Healing

Wound healing is an evolved dynamic biological process. Though many research and clinical approaches have been explored to restore damaged or diseased skin, the current treatment for deep cutaneous injuries is far from being perfect, and the ideal regenerative therapy remains a significant challenge. Of all treatments, bioengineered scaffolds play a key role and represent great progress in wound repair and skin regeneration. In this review, we focus on the latest advancement in biomaterial scaffolds for wound healing. We discuss the emerging philosophy of designing biomaterial scaffolds, followed by precursor development. We pay particular attention to the therapeutic interventions of bioengineered scaffolds for cutaneous wound healing, and their dual effects while conjugating with bioactive molecules, stem cells, and even immunomodulation. As we review the advancement and the challenges of the current strategies, we also discuss the prospects of scaffold development for wound healing.

Evidence for bicomponent fibers: A review

Recently, bicomponent fibers have been attracting much attention due to their unique structural characteristics and properties. A common concern was how to characterize a bicomponent fiber. In this review, we generally summarized the classification, structural characteristics, preparation methods of the bicomponent fibers, and focused on the experimental evidence for the identification of bicomponent fibers. Finally, the main challenges and future perspectives of bicomponent fibers and their characterization are provided. We hope that this review will provide readers with a comprehensive understanding of the design and characterization of bicomponent fibers.

Instant in-situ Tissue Repair by Biodegradable PLA/Gelatin Nanofibrous Membrane Using a 3D Printed Handheld Electrospinning Device

Background: This study aims to design a 3D printed handheld electrospinning device and evaluate its effect on the rapid repair of mouse skin wounds.

Methods: The device was developed by Solidworks and printed by Object 350 photosensitive resin printer. The polylactic acid (PLA)/gelatin blend was used as the raw material to fabricate in-situ degradable nanofiber scaffolds. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and water vapor permeability test were used to evaluate the material properties of the scaffolds; cytotoxicity test was performed to evaluate material/residual solvent toxicity, and in situ tissue repair experiments in Balb/c mouse were performed.

Results: The 3D printed handheld electrospinning device successfully fabricates PLA/gelatin nanofibrous membrane with uniformly layered nanofibers and good biocompatibility. Animal experiments showed that the mice in the experimental group had complete skin repair.

Conclusions: The 3D printed handheld device can achieve in situ repair of full-thickness defects in mouse skin.

Design of the Prototype of Contact Drawing Device for Potential Individual Therapeutic Fiber Formation Purposes

Pharmaceutical compounding enables the preparation of unlicensed medicine to meet specific patient needs that do not have a licensed medicine available on the market. It must be performed in the best possible circumstance by certified pharmacists using validated standard operating procedures to obtain the highest quality medicinal product. The various spinning techniques provide drug delivery systems easily adapted to individual patient's needs among the emerging technologies. The primary purpose of the present work was to introduce the prototype of a contact drawing device for the compounding of drug delivery systems for individual in-patient needs. The preliminary experiments resulted in oriented fibers of micrometer diameter range. The device can be placed in controlled conditions and could provide drug-loaded fibrous sheets for further treatments assuring the individual patient's medicine need of the required quality.

Curcumin-loaded sandwich-like nanofibrous membrane prepared by electrospinning technology as wound dressing for accelerate wound healing

Wound healing is a complicated process constituted of four successive physiological stages involving wound bleeding, inflammatory response, cell proliferation and tissue remodeling. During this period, bacteria can easily infect the wound. Therefore, we prepared a novel curcumin-loaded sandwich-like nanofibrous membrane (CSNM) using sequential electrospinning for the hemostasis, antibacterial and accelerate wound healing. The morphology of the nanofibrous membrane was analyzed by SEM. In addition, the water absorption capacity, water vapor transmission rate, water contact-angle, and in vitro drug release were all tested. Then in vitro and in vivo hemostatic experiments demonstrated that CSNM has a good hemostatic effect. Antioxidant effect was assessed by the DPPH radical scavenging method and CSNM presented a high antioxidant activity. Additionally, CSNM demonstrated excellent antibacterial activity by the disk diffusion method. Furthermore, the rat dorsal skin defects model revealed that the CSNM distinctly induced the granulation tissue grew, collagen deposition and epithelial tissue remodeling. Meanwhile, the results of the immunohistochemical staining showed that the CSNM can facilitate the expression of CD31 and TGF-β in the early stage of the wound, thereby accelerating wound healing. In general, this study proved that the multifunctional CSNM has great potential as wound dressing in wound healing.

In-situ electrospinning of thymol-loaded polyurethane fibrous membranes for waterproof, breathable, and antibacterial wound dressing application

Skin-like flexible membrane with excellent water resistance and moisture permeability is an urgent need in the wound dressing field to provide comfort and protection for the wound site. Despite efforts that have been made in the development of waterproof and breathable (W&B) membranes, the in-situ electrospinning of W&B membranes suitable for irregular wound surfaces as wound dressings still faces huge challenges. In the current work, a portable electrospinning device with multi-functions, including adjustable perfusion speed for a large range from 0.05 mL/h to 10 mL/h and high voltage up to 11 kV, was designed. The thymol-loaded ethanol-soluble polyurethane (EPU) skin-like W&B nanofibrous membranes with antibacterial activity were fabricated via the custom-designed device. Ultimately, the resultant nanofibrous membranes composed of EPU, fluorinated polyurethane (FPU), and thymol presented uniform structure, robust waterproofness with the hydrostatic pressure of 17.6 cm H₂O, excellent breathability of 3.56 kg m^-2 d^-1, the high tensile stress of 1.83 MPa and tensile strain of 453%, as well as high antibacterial activity. These results demonstrate that the new-type device has potential as a portable electrospinning apparatus for the fabrication of antibacterial membranes directly on the wound surface and puts a new way for the development of portable electrospinning devices.

3D bioprinting for skin tissue engineering: Current status and perspectives

Skin and skin appendages are vulnerable to injury, requiring rapidly reliable regeneration methods. In recent years, 3D bioprinting has shown potential for wound repair and regeneration. 3D bioprinting can be customized for skin shape with cells and other materials distributed precisely, achieving rapid and reliable production of bionic skin substitutes, therefore, meeting clinical and industrial requirements. Additionally, it has excellent performance with high resolution, flexibility, reproducibility, and high throughput, showing great potential for the fabrication of tissue-engineered skin. This review introduces the common techniques of 3D bioprinting and their application in skin tissue engineering, focusing on the latest research progress in skin appendages (hair follicles and sweat glands) and vascularization, and summarizes current challenges and future development of 3D skin printing.

Radiopaque scaffolds based on electrospun iodixanol/polycaprolactone fibrous composites

Grafts based on biodegradable polymer scaffolds are increasingly used in tissue-engineering applications as they facilitate natural tissue regeneration. However, monitoring the position and integrity of these scaffolds over time is challenging due to radiolucency. In this study, we used an electrospinning method to fabricate biodegradable scaffolds based on polycaprolactone (PCL) and iodixanol, a clinical contrast agent. Scaffolds were implanted subcutaneously into C57BL/6 mice and monitored in vivo using longitudinal X-ray imaging and micro-computed tomography (CT). The addition of iodixanol altered the physicochemical properties of the PCL scaffold; notably, as the iodixanol concentration increased, the fiber diameter decreased. Radiopacity was achieved with corresponding signal enhancement as iodine concentration increased while exhibiting a steady time-dependent decrease of 0.96% per day in vivo. The electrospun scaffolds had similar performance with tissue culture-treated polystyrene in supporting the attachment, viability, and proliferation of human mesenchymal stem cells. Furthermore, implanted PCL-I scaffolds had more intense acute inflammatory infiltrate and thicker layers of maturing fibrous tissue. In conclusion, we developed radiopaque, biodegradable, biocompatible scaffolds whose position and integrity can be monitored noninvasively. The successful development of other imaging enhancers may further expand the use of biodegradable scaffolds in tissue engineering applications.

Curcumin-loaded polyvinyl butyral film with antibacterial activity

Antibacterial materials have found widespread interest in different fields nowadays. In this study, curcumin (Cur) was incorporated into the polyvinyl butyral (PVB) matrix by dissolving in ethanol for improving the functional properties of a pure PVB film. We found that Cur was uniformly dispersed in the PVB matrix, which showed good compatibility. Moreover, the incorporation of Cur could also improve thermal stability, hydrophilicity, and mechanical property. The UV-vis spectra of the PVB–Cur film demonstrated that the film could block ultraviolet radiation. Subsequently, the antibacterial activity of the PVB–Cur film was measured by the colony-counting method against S. aureus and E. coli. The results showed that the PVB–Cur film exhibited good antibacterial activity. Therefore, the PVB–Cur film was considered as a promising material for food and medical packaging applications.

Fabrication of flexible SiO2 nanofibrous yarn via a conjugate electrospinning process

Nowadays, different kinds of polymers, including ceramics, are electrospun into fibrous materials with different structures by electrospinning. Generally, the as-spun ceramic fibers are randomly oriented membranes and brittle without flexibility. Here, we report the fabrication of flexible SiO2 electrospun yarns using poly(vinyl alcohol) (PVA) as a template through a conjugate electrospinning process and calcination. It was found that the calcined as-spun fibers and yarns are obviously thinned with PVA component removal. Fourier transform infrared spectroscopy and energy-dispersive spectroscopy examinations suggested that the obtained yarn after calcination was SiO2 yarn. The SiO2 yarn showed good flexibility without cracking after 180° bending. The flexible ceramic yarn may have potential application in functional textiles.

Self-powered portable melt electrospinning for in situ wound dressing

Background

Electrospun (e-spun) nanofibers for wound dressing have attracted wide attention due to its large specific surface area, large porosity and breathability. Compared with solution electrospinning (e-spinning), melt e-spinning is more bio-friendly without toxic solvent participation, which provides the possibility of in situ e-spinning on wounds directly. However, previously reported melt e-spinning devices were usually bulky and cumbersome due to their necessary heating unit, and different components were separated to avoid electrostatic interference.

Results

In this article, we report on a self-powered hand-held melt e-spinning gun which can work without any external power supply (outdoors). The problem of electrostatic interference for this integrated device was solved by using a special high heat transfer insulation unit. The apparatus is easy and safe to operate by a single hand due to its small volume (24 × 6 × 13 cm³) and light weight (about 450 g). Some biodegradable polymers, for example, polycaprolactone (PCL) fibers were successful e-spun onto wounds directly by using this dressing gun.

Conclusions

PCL fibrous membrane has good biocompatibility and can be in situ electrospun to wound surface as a wound dressing by the portable melt e-spinning gun. Besides wound dressing, this hand-held melt e-spinning gun may be used in 3D printing and experimental teaching demonstration aids.

Multifunctional composite membrane based on BaTiO3@PU/PSA nanofibers for high-efficiency PM2.5 removal

In this study, a new barium titanate@polyurethane/polysulfonamide (BaTiO₃@PU/PSA) composite nanofibrous membrane with comprehensive properties for high temperature filtration and robust PM2.5 removal was successfully fabricated through the blending spinning of PU and PSA and the introduction of BaTiO₃. As a consequence, the BaTiO₃@PU/PSA membrane achieved the high capture efficiency of 99.99 % for fine particulates, low pressure drop of 39.4 ± 0.2 Pa, good mechanical property (13.27 MPa), sufficient flexibility, high thermal stability (up to 300 °C), favorable flame-retardancy as well as superior chemical resistance against acid and alkali. Especially, to intuitively reveal the relationship between the fiber structure, high temperature environment, gas velocity and filtration performance of the composite membrane, the filtration processes were carefully investigated through the analog simulation. More importantly, the BaTiO₃@PU/PSA membrane exhibited high-efficiency PM2.5 purification capacity, and the removal efficiency kept stable after high temperature, acid or alkali treatment, ascribing to the advantageous structure of PSA, PU and BaTiO₃. Overall, the BaTiO₃@PU/PSA nanofiber membranes with versatility are a promising high-efficiency candidate for dust removal, particularly in harsh conditions.

Recent Advances in Electrospun Sustainable Composites for Biomedical, Environmental, Energy, and Packaging Applications

Electrospinning has gained constant enthusiasm and wide interest as a novel sustainable material processing technique due to its ease of operation and wide adaptability for fabricating eco-friendly fibers on a nanoscale. In addition, the device working parameters, spinning solution properties, and the environmental factors can have a significant effect on the fibers' morphology during electrospinning. This review summarizes the newly developed principles and influence factors for electrospinning technology in the past five years, including these factors' interactions with the electrospinning mechanism as well as its most recent applications of electrospun natural or sustainable composite materials in biology, environmental protection, energy, and food packaging materials.

Highly efficient transparent air filter prepared by collecting-electrode-free bipolar electrospinning apparatus

Electrospinning technology has been used for a long time. A jet from a needle was formed by applying high voltage, and then the nanofibers are deposited onto a collecting electrode (usually metal) and the excess charge is conducted away to complete the electrospinning. Alternatively, it is also possible to prevent charge accumulation from hindering the progress of electrospinning by means of charge neutralization. A bipolar electrospinning technique (B-EEM) was developed to induce jets with different charges through a set of high-voltage power supplies of opposite polarity, and the two jets neutralize each other on the insulating mesh, thus completing the electrospinning process. There is no need for a collecting electrode to complete the electrospinning process. We have found that the filters produced by the new technology have better filtration efficiency while maintaining the same transparency in relative to the original technology, and this optimization is due to the distribution modification of the nanofibers on the mesh.

Poly (vinylpyrrolidone)‑iodine engineered poly (ε-caprolactone) nanofibers as potential wound dressing materials

Facilitating the process of wound healing and effective treatment of wounds remains a serious challenge in healthcare. Wound dressing materials play a major role in the protection of wounds and in accelerating the natural healing process. In the present study, novel core/shell (c/s) nanofibrous mats of poly(vinyl pyrrolidone)‑iodine (PVPI) and polycaprolactone (PCL) were fabricated using a co-axial electrospinning process followed by their surface modification with poly-l-lysine. The developed nanofibrous mats were extensively characterized for their physicochemical properties using various analytical techniques. The core/shell structure of the PVP-I/PCL nanofibers was confirmed using TEM analysis. The PVP-I release studies showed an initial burst phase followed by a sustained release pattern of PVP-I over a period of 30 days. The developed nanofibers exhibited higher BSA and fibrinogen adsorption as compared to pristine PCL. Cytotoxicity studies using MTT assay demonstrated that the PVP-I/PCL (c/s) nanofibers were cytocompatible at optimized PVP-I concentration (3 wt%). The PCL-poly-l-lysine and PVP-I/PCL-poly-l-lysine nanofibers exhibited higher cell viability (24.2% and 21.4% higher at day 7) when compared to uncoated PCL and PVP-I/PCL nanofibers. The PVP-I/PCL nanofibers showed excellent antimicrobial activity against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria. The inflammatory response of Mouse RAW 264.7 macrophage cells towards the nanofibers was studied using RT-PCR. It revealed that the pro-inflammatory cytokines (TNF-α and IL-1β) were significantly upregulated on PCL nanofibers, while their expression was comparatively lower on poly-l-lysine coated PCL or PVP-I/PCL(c/s) nanofibers. Overall, the study highlights the ability of poly-l-lysine coated PVP-I/PCL (c/s) nanofibers as potential wound dressing materials effectively facilitating the early stage wound healing and repair process by virtue of their selective modulation of inflammation, cell adhesion and antimicrobial properties.

Transparent Polyurethane Nanofiber Air Filter for High-Efficiency PM2.5 Capture

Fine particulate matter (PM) has seriously affected human life, such as affecting human health, climate, and ecological environment. Recently, many researchers use electrospinning to prepare nanofiber air filters for effective removal of fine particle matter. However, electrospinning of the polymer fibers onto the window screen uniformly is only achieved in the laboratory, and the realization of industrialization is still very challenging. Here, we report an electrospinning method using a rotating bead spinneret for large-scale electrospinning of thermoplastic polyurethane (TPU) onto conductive mesh with high productivity of 1000 m²/day. By changing the concentration of TPU in the polymer solution, PM2.5 removal efficiency of nanofiber-based air filter can be up to 99.654% with good optical transparency of 60%, and the contact angle and the ventilation rate of the nanofiber-based air filter is 128.5° and 3480 mm/s, respectively. After 10 times of filtration, the removal efficiency is only reduced by 1.6%. This transparent air filter based on TPU nanofibers has excellent filtration efficiency and ventilation rate, which can effectively ensure indoor air quality of the residential buildings.

Recent Advances in Hemostasis at the Nanoscale

Rapid and effective hemostatic materials have received wide attention not only in the battlefield but also in hospitals and clinics. Traditional hemostasis relies on materials with little designability which has many limitations. Nanohemostasis has been proposed since the use of peptides in hemostasis. Nanomaterials exhibit excellent adhesion, versatility, and designability compared to traditional materials, laying a good foundation for future hemostatic materials. This review first summarizes current hemostatic methods and materials, and then introduces several cutting-edge designs and applications of nanohemostatic materials such as polypeptide assembly, electrospinning of cyanoacrylate, and nanochitosan. Particularly, their advantages and working mechanisms are introduced. Finally, the challenges and prospects of nanohemostasis are discussed.

Electrospun Polymer Composite Membrane with Superior Thermal Stability and Excellent Chemical Resistance for High-Efficiency PM2.5 Capture

To address the challenge of high-temperature air filtration, a novel electreted polysulfonamide/polyacrylonitrile-boehmite (PSA/PAN-B) composite nanofiber based filter was developed via electrospinning for effective high-temperature dust removal. In this study, the spinnability of PSA was greatly improved by adding a small amount of PAN as an auxiliary polymer, and the introduction of a boehmite electret further significantly reinforced the properties of PSA fibers. As a result, the PSA/PAN-B membrane exhibited a high filtration efficiency (up to 99.52 ± 0.32%), low pressure drop (45.16 ± 1.39 Pa), excellent flexibility, good mechanical properties, high thermal stability (up to approximately 300 °C), and superior chemical resistance. Through data analysis and 3D simulation, the important benefits of the boehmite electret in the optimization of the PSA fibrous membrane performance were determined: it increases the charge storage capacity, constructs a rough surface morphology, improves the specific surface area, and enhances the mechanical properties. More importantly, the PSA/PAN-B film possessed a robust PM2.5 purification capacity, and the particulate matter removal efficiency was kept unchanged after high-temperature, acid, or alkali treatment-a performance derived from the intrinsic molecular structure of PSA. The PSA/PAN-B composite fibrous membrane, with excellent comprehensive properties, is a promising candidate for air filters, especially in harsh environments, further broadening the applications of PSA and providing new insight into the design of high-performance filters with high-temperature and corrosion resistance.

Oxidized cellulose-based hemostatic materials

The application of hemostatic agents is essential to prevent significant blood loss and death from excessive bleeding in surgical or emergency scenarios. Oxidized cellulose is an excellent biodegradable and biocompatible derivate of cellulose, which has become one of the most important hemostatic agents used in surgical procedures. However, to date, there has been no comprehensive report assessing oxidized cellulose-based hemostatic materials. Hence, this paper first reviewed the oxidation preparation, cellulose origin and structure, as well as biodegradability and safety of oxidized cellulose. Then a comprehensive review regarding the hemostatic mechanisms, various forms, modification, and current commercially available products of oxidized cellulose is discussed, which emphatically presents the most significant developments in the recent scientific literature. In conclusion, this paper summarizes the latest developments in oxidized cellulose-based hemostatic materials and provides a reference for further research and development in this field.

Advances in portable electrospinning devices for in situ delivery of personalized wound care

Electrospinning and electrospun fibrous assemblies have attracted interest in a variety of biomedical fields including woundcare, tissue engineering and drug delivery, due to the large surface-area-to-volume ratio and high porosity of nanofibrous webs. Normally, wound dressings are manufactured well before the point of care, and then packaged and distributed for use at a later stage. More recently, in situ electrospinning of fibers directly onto wound sites has been proposed as a route to personalized wound dressing manufacture, tailored to the needs of individual patients. Practically, in situ deposition of nanofibers on to a wound could be envisaged using a portable or hand-held electrospinning device that is safe and easy to operate. This review focuses on recent advances in portable electrospinning technology and potential applications in woundcare and regenerative medicine. The main research challenges and future trends are also considered.

Preparation of Nanofibrous PVDF Membrane by Solution Blow Spinning for Mechanical Energy Harvesting

Self-powered nanogenerators composed of poly(vinylidene fluoride) (PVDF) have received much attention. Solution blow spinning (SBS) is a neoteric process for preparing nanofiber mats with high efficiency and safely, and SBS is a mature fiber-forming technology that offers many advantages over conventional electrospinning methods. Herein, we adopted the SBS method to prepare independent PVDF nanofiber membranes (NFMs), and successfully employed them as nanogenerators. Finally, we tested the change in the output current caused by mechanical compression and stretching, and studied its durability and robustness by charging the capacitor, which can drive tiny electronic devices. The results show that the PVDF nanogenerators by using this SBS equipment can not only be used in wearable electronic textiles, but are also suitable for potential applications in micro-energy harvesting equipment.

One Step In Situ Loading of CuS Nanoflowers on Anatase TiO2/Polyvinylidene Fluoride Fibers and Their Enhanced Photocatalytic and Self-Cleaning Performance

CuS nanoflowers were loaded on anatase TiO₂/polyvinylidene fluoride (PVDF) fibers by hydrothermal treated electrospun tetrabutyl orthotitanate (TBOT)/PVDF fibers at low temperature. The results indicated that the amount of copper source and sulfur source determined the crystallization and morphology of the resultant products. It was found that the composite of CuS narrowed the band gap energy of TiO₂ and enhanced the separation efficiency of the photogenerated electron-hole pairs of TiO₂. The photocatalytic reaction rate of CuS/TiO₂/PVDF fibers to rhodamine B was 3 times higher than that of TiO₂/PVDF fibers under visible light irradiation. Besides, owing to the preparation process was carried out at low temperature, the flexibility of CuS/TiO₂/PVDF fibers was ensured. In addition, the self-cleaning performance of the dye droplets on the resultant product surface was demonstrated under visible light. Meanwhile, the resultant product can automatically remove dust on the surface of the material under the rolling condition of droplets due to its hydrophobicity. Therefore, the as-prepared CuS/TiO₂/PVDF fibers can not only degrade the contaminated compounds, but also depress the maintenance cost owing to its self-cleaning performance, which means a very practical application prospect.

Recent Advances and Applications of Semiconductor Photocatalytic Technology

Along with the development of industry and the improvement of people’s living standards, peoples’ demand on resources has greatly increased, causing energy crises and environmental pollution. In recent years, photocatalytic technology has shown great potential as a low-cost, environmentally-friendly, and sustainable technology, and it has become a hot research topic. However, current photocatalytic technology cannot meet industrial requirements. The biggest challenge in the industrialization of photocatalyst technology is the development of an ideal photocatalyst, which should possess four features, including a high photocatalytic efficiency, a large specific surface area, a full utilization of sunlight, and recyclability. In this review, starting from the photocatalytic reaction mechanism and the preparation of the photocatalyst, we review the classification of current photocatalysts and the methods for improving photocatalytic performance; we also further discuss the potential industrial usage of photocatalytic technology. This review also aims to provide basic and comprehensive information on the industrialization of photocatalysis technology.

In Situ Surface Modification of Paper-Based Relics with Atmospheric Pressure Plasma Treatment for Preservation Purposes

Paper-based relics, which are an important part of cultural heritage worldwide, are at risk of imminent damage from various environmental sources. To protect them, the atmospheric pressure plasma polymerization of hexamethyldisiloxane (HMDSO) precursor has been explored on paper-based relics in situ. The macro and micro images taken during this process suggest that the in situ plasma treatment does not change the macro morphology and the micro structure of the treated paper-based relic samples. On the other hand, plasma treatment causes the polymerization of the HMDSO which then produces nanoparticles deposited onto the paper-based relics. These nanoparticles provide good waterproof properties with large static water contact angles and smaller rolling angles, which protect the paper-based relics from water penetration. Moreover, since the nanoparticles are deposited onto the fibers, waterproof fastness is ensured. Also, the examined mechanical properties of the treated and untreated paper-based relics indicate that the atmospheric pressure plasma treatment does not affect the strength of the paper very much. The results in this study show that atmospheric pressure plasma treatment with the use of HMDSO precursor is a good method to preserve paper-based relics.

Waterproof-breathable PTFE nano- and Microfiber Membrane as High Efficiency PM2.5 Filter

This study shows the feasibility of using electrospinning technique to prepare polytetrafluoroethylene/poly (vinyl alcohol) (PTFE/PVA) nanofibers on PTFE microfiber membrane as substrate. Then, PVA in the fiber membrane was removed by thermal treatment at about 350 °C. Compared to PTFE microfiber substrates, the composite PTFE fiber membranes (CPFMs) have improved filtration efficiency by 70% and water contact angle by 23°. Experimental test data showed that the water contact angle of the sample increased from about 107° to 130°, the filtration efficiency of PM2.5 increased from 44.778% to 98.905%, and the filtration efficiency of PM7.25 increased from 66.655% to 100% due to the electrospun PTFE nanofiber layer. This work demonstrates the potential of CPFMs as a filter for the production of indoor or outdoor dust removal and industrially relevant gas filtration.

In situ accurate deposition of electrospun medical glue fibers on kidney with auxiliary electrode method for fast hemostasis

An auxiliary electrode electrospinning method is proposed to deposit N-octyl-2-cyanoacrylate (NOCA) medical glue fibrous membrane on kidney for in-situ fast hemostasis. A metal electrode equipped to the spinning needle is used to confine the divergence angle of jet. Compared to the conventional electrospinning method, the fiber deposition area has reduced by 2.5 times, and it can achieve in-situ accurate deposition. Moreover, it reduces both the external dimension and over-reliance on electricity, which is superior to previous air-flow assisted electrospinning method. In addition, in situ accurate deposition of NOCA on the kidney exhibits fast hemostasis within 10 s, confirming that this auxiliary electrode method can be applied in outdoors for fast hemostasis. Further pathological studies indicate that this auxiliary electrode method can reduce the inflammatory response of tissues due to the better accurate deposition. This portable hand-held device with the auxiliary electrode method may have potential application in fast hemostasis for outdoors due to its accurate deposition and portability characteristics.

Fabrication of Ultrafine PPS Fibers with High Strength and Tenacity via Melt Electrospinning

Electrospinning (e-spinning) is an emerging technique to prepare ultrafine fibers. Polyphenylene sulfide (PPS) is a high-performance resin which does not dissolve in any solvent at room temperature. Commercial PPS fibers are produced mainly by meltblown or spunbonded process to give fibers ~20 μm in diameter. In this research, an in-house designed melt electrospinning device was used to fabricate ultrafine PPS fibers, and the e-spinning operation conducted under inert gas to keep PPS fibers from oxidizing. Under the optimum e-spinning conditions (3 mm of nozzle diameter, 30 kV of electrostatic voltage, and 9.5 cm of tip-to-collector distance), the as-spun fibers were less than 8.0 μm in diameter. After characterization, the resultant PPS fibers showed uniform diameter and structural stability. Compared with commercial PPS staple fibers, the obtained fibers had a cold crystallization peak and 10 times higher storage modulus, thereby offering better tensile tenacity and more than 400% elongation at break.