Biosynthesis and Antibacterial Activity of Silver Nanoparticles Using Yeast Extract as Reducing and Capping Agents

Biodiversity and probiotic potential of yeasts isolated from sumbawa horse milk

BACKGROUND

The microbial composition of Sumbawa Horse Milk is influenced by various factors, including environmental elements that encompass geographical location, climate, and conditions specific to Sumbawa. This study aimed to determine the biodiversity and genetic diversity of the microbiome of Sumbawa Horse Milk, with an emphasis on yeast.

METHODS

The diversity and group of yeast isolates were evaluated by the sequence-related amplified polymorphism (SRAP) method using ME2F-EM15R (1) and ME2F-EM12R (2) primers. Molecular identification using 18 S rRNA primers was then carried out on nine selected isolates (K_21, K_31, K_42, K_45, K_1, K_6, K_8, K_17, and K_19) to determine the type of yeast. Probiotic candidate tests were carried out on three isolates, namely K_1, K_6 and K_8.

RESULTS

Analysis with NTSYS software on the SRAP results using Primer 1 revealed the presence of two major groups, where Group I was exclusively comprised of K_45 isolate, whereas the other isolates belonged to Group II. On the other hand, analysis with NTSYS software on the SRAP analysis with Primer 2 also showed two major groups with different compositions. Group I consisted of isolates K_39, 38, 37, 36, 35, 34, 33, 31, 29, 28, 27, 26, 25, 24, 23, 22, and 21, while the remaining isolates belonged to Group II. Results of 18 S rRNA analysis demonstrated that K_17 and K_19 had 99.8 and 100% similarity, respectively, and identified as Candida humilis. K_21, K_31, and K_45 were identified as having a 100% similarity to Clavispora lusitaniae, while K_42 had a 99.8% similarity to Candida parapsilosis. Three isolates were identified as belonging to the genus Ogataea, namely Ogataea polymorpha (K_6 and K_8) and Ogataea siamensis (K_1) with similarity of 100% and 99.8%, respectively.

CONCLUSIONS

These findings suggest that the three yeast have potential as probiotics.

A review of microbes mediated biosynthesis of silver nanoparticles and their enhanced antimicrobial activities

In recent decades, biosynthesis of metal and (or) metal oxide nanoparticles using microbes is accepted as one of the most sustainable, cost-effective, robust, and green processes as it does not encompass the usage of largely hazardous chemicals. Accordingly, numerous simple, inexpensive, and environmentally friendly approaches for the biosynthesis of silver nanoparticles (AgNPs) were reported using microbes avoiding conventional (chemical) methods. This comprehensive review detailed an advance made in recent years in the microbes-mediated biosynthesis of AgNPs and evaluation of their antimicrobial activities covering the literature from 2015-till date. It also aimed at elaborating the possible effect of the different phytochemicals, their concentrations, extraction temperature, extraction solvent, pH, reaction time, reaction temperature, and concentration of precursor on the shape, size, and stability of the synthesized AgNPs. In addition, while trying to understand the antimicrobial activities against targeted pathogenic microbes the probable mechanism of the interaction of produced AgNPs with the cell wall of targeted microbes that led to the cell's reputed and death have also been detailed. Lastly, this review detailed the shape and size-dependent antimicrobial activities of the microbes-mediated AgNPs and their enhanced antimicrobial activities by synergetic interaction with known commercially available antibiotic drugs.

Microbial nanotechnology for agriculture, food, and environmental sustainability: Current status and future perspective

The field of nanotechnology has the mysterious capacity to reform every subject it touches. Nanotechnology advancements have already altered a variety of scientific and industrial fields. Nanoparticles (NPs) with sizes ranging from 1 to 100 nm (nm) are of great scientific and commercial interest. Their functions and characteristics differ significantly from those of bulk metal. Commercial quantities of NPs are synthesized using chemical or physical methods. The use of the physical and chemical approaches remained popular for many years; however, the recognition of their hazardous effects on human well-being and conditions influenced serious world perspectives for the researchers. There is a growing need in this field for simple, non-toxic, clean, and environmentally safe nanoparticle production methods to reduce environmental impact and waste and increase energy productivity. Microbial nanotechnology is relatively a new field. Using various microorganisms, a wide range of nanoparticles with well-defined chemical composition, morphology, and size have been synthesized, and their applications in a wide range of cutting-edge technological areas have been investigated. Green synthesis of the nanoparticles is cost-efficient and requires low maintenance. The present review highlights the synthesis of the nanoparticles by different microbes, their characterization, and their biotechnological potential. It further deals with the applications in biomedical, food, and textile industries as well as its role in biosensing, waste recycling, and biofuel production.

Synthesis of Silver Nanoparticles Using Camellia sinensis Leaf Extract: Promising Particles for the Treatment of Cancer and Diabetes

Both diabetes and cancer pose significant threats to public health. To overcome these challenges, nanobiotechnology offers innovative solutions for the treatment of these diseases. However, the synthesis of nanoparticles can be complex, costly and environmentally toxic. Therefore, in this study, we successfully synthesized Camellia sinensis silver nanoparticles (CS-AgNPs) biologically from methanolic leaf extract of C. sinensis and as confirmed by the visual appearance which exhibited strong absorption at 456 nm in UV-visible spectroscopy. The fourier transform infrared spectroscopy (FTIR) analysis revealed that phytochemicals of C. sinensis were coated with AgNPs. Scanning electron microscopy (SEM) analysis showed the spherical shape of CS-AgNPs, with a size of 15.954 nm, while X-ray diffraction spectrometry (XRD) analysis detected a size of 20.32 nm. Thermogravimetric analysis (TGA) indicated the thermal stability of CS-AgNPs. The synthesized CS-AgNPs significantly inhibited the ehrlich ascites carcinoma (EAC) cell growth with 53.42±1.101 %. The EAC cell line induced mice exhibited increased level of the serum aspartate aminotransferase (AST), alanine transaminase (ALT), and alkaline phosphatase (ALP), however this elevated serum parameter significantly reduced and controlled by the treatment with CS-AgNPs. Moreover, in a streptozotocin-induced diabetic mice model, CS-AgNPs greatly reduced blood glucose, total cholesterol, triglyceride, low-density lipoprotein (LDL) and creatinine levels. These findings highlight that the synthesized CS-AgNPs have significant anticancer and antidiabetic activities that could be used as promising particles for the treatment of these major diseases. However, pre-clinical and clinical trial should be addressed before use this particles as therapeutics agents.

Construction of durable antibacterial cellulose textiles through grafting dynamic disulfide-containing amino-compound and nanosilver deposition

Cotton textile is very comfortable to wear, and also provides an ideal environment for bacterial propagation, easily causing harm to human health. In order to address this issue, various antibacterial techniques are employed for cotton finishing. However, some processes are complex and involve the use of environmentally unfriendly chemicals. In this work, a durable and efficient antibacterial cotton fabric was prepared via grafting of an amino-compound containing dynamic disulfide bonds, and then in-situ deposition of silver nanoparticles (AgNPs). Briefly, the reactive α-lipoic acid-modified polyethyleneimine (mPEI) was introduced to the cotton fibers via thiol-ene click reaction. Subsequently, the amino groups and dynamically-generated sulfhydryl groups in the mPEI molecules were used to initiate the ultrafast reduction of silver ions without the participation of additional reductant, constructing a stable antibacterial layer on fiber surface. The results reveal that the amino and thiol groups of mPEI could form coordination bonds with the deposited silver nanoparticles, and the antibacterial ability of AgNP@cotton-g-mPEI fabric remains at a high level even after 20 washing cycles. After 30 min of contact with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), the antibacterial rates against both bacteria reached 99.99 %. Meanwhile, the network matrix constructed by the recombination of the dynamic disulfide bonds in mPEI endows the cotton fabric with detectable wrinkle resistance and encouraging anti-ultraviolet effect. The present work provides a novel alternative for preparation of durable and efficient antibacterial textiles.

Extracellular synthesis of silver nanoparticle using yeast extracts: antibacterial and seed priming applicationss

The evolution and rapid spread of multidrug-resistant (MDR) bacterial pathogens have become a major concern for human health and demand the development of alternative antimicrobial agents to combat this emergent threat. Conventional intracellular methods for producing metal nanoparticles (NPs) using whole-cell microorganisms have limitations, including binding of NPs to cellular components, potential product loss, and environmental contamination. In contrast, this study introduces a green, extracellular, and sustainable methodology for the bio-materialization of silver NPs (AgNPs) using renewable resource cell-free yeast extract. These extracts serve as a sustainable, biogenic route for both reducing the metal precursor and stabilizing the surface of AgNPs. This method offers several advantages such as cost-effectiveness, environment-friendliness, ease of synthesis, and scalability. HR-TEM imaging of the biosynthesized AgNPs revealed an isotropic growth route, resulting in an average size of about ~ 18 nm and shapes ranging from spherical to oval. Further characterization by FTIR and XPS results revealed various functional groups, including carboxyl, hydroxyl, and amide contribute to enhanced colloidal stability. AgNPs exhibited potent antibacterial activity against tested MDR strains, showing particularly high efficacy against Gram-negative bacteria. These findings suggest their potential role in developing alternative treatments to address the growing threat of antimicrobial resistance. Additionally, seed priming experiments demonstrated that pre-sowing treatment with AgNPs improves both the germination rate and survival of Sorghum jowar and Zea mays seedlings. KEY POINTS: •Yeast extract enables efficient, cost-effective, and eco-friendly AgNP synthesis. •Biosynthesized AgNPs showed strong antibacterial activity against MDR bacteria. •AgNPs boost seed germination and protect against seed-borne diseases.

Optimization of the biosynthesis of silver nanoparticles using bacterial extracts and their antimicrobial potential

In the present study, silver nanoparticles (AgNPs) were biosynthesized using the supernatant and the intracellular extract of Cupriavidus necator, Bacillus megaterium, and Bacillus subtilis. The characterization of the AgNPs was carried out using UV-Vis spectroscopy, FTIR, DLS and TEM. Resazurin microtiter-plate assay was used to determine the antimicrobial action of AgNPs against Escherichia coli. UV-Visible spectra showed peaks between 414 and 460 nm. TEM analysis revealed that the synthesized AgNPs showed mostly spherical shapes. DLS results determined sizes from 20.8 to 118.4 nm. The highest antimicrobial activity was obtained with the AgNPs synthesized with supernatant rather than those using the intracellular extract. Therefore, it was determined that the bacterial species, temperature, pH, and type of extract (supernatant or intracellular) influence the biosynthesis. This synthesis thus offers a simple, environmentally friendly, and low-cost method for the production of AgNPs, which can be used as antibacterial agents.

k- Strong Inference Algorithm: A Hybrid Information Theory Based Gene Network Inference Algorithm

Gene networks allow researchers to understand the underlying mechanisms between diseases and genes while reducing the need for wet lab experiments. Numerous gene network inference (GNI) algorithms have been presented in the literature to infer accurate gene networks. We proposed a hybrid GNI algorithm, k-Strong Inference Algorithm (ksia), to infer more reliable and robust gene networks from omics datasets. To increase reliability, ksia integrates Pearson correlation coefficient (PCC) and Spearman rank correlation coefficient (SCC) scores to determine mutual information scores between molecules to increase diversity of relation predictions. To infer a more robust gene network, ksia applies three different elimination steps to remove redundant and spurious relations between genes. The performance of ksia was evaluated on microbe microarrays database in the overlap analysis with other GNI algorithms, namely ARACNE, C3NET, CLR, and MRNET. Ksia inferred less number of relations due to its strict elimination steps. However, ksia generally performed better on Escherichia coli (E.coli) and Saccharomyces cerevisiae (yeast) gene expression datasets due to F- measure and precision values. The integration of association estimator scores and three elimination stages slightly increases the performance of ksia based gene networks. Users can access ksia R package and user manual of package via https://github.com/ozgurcingiz/ksia .

Ag Nanoparticles-Induced Metallic Conductivity in Thin Films of 2D Metal-Organic Framework Cu3(HHTP)2

Two-dimensional (2D) metal-organic frameworks (MOFs) are usually associated with higher electrical conductivity and charge carrier mobility when compared with 3D MOFs. However, attaining metallic conduction in such systems through synthetic or postsynthetic modifications is extremely challenging. Herein, we present the fabrication of thin films of a 2D MOF, Cu3(HHTP)2 (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene), decorated with silver nanoparticles (AgNPs) exhibiting significant conductivity enhancement at room temperature. Variable-temperature electrical transport measurements across the low-temperature (200 K) to high-temperature (373 K) regime evidenced metallic conduction. Interestingly, thin films of a 3D MOF, CuTCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane), upon decoration with AgNPs, disclosed a converse trend. The origin of such distinctive observations on AgNPs@Cu3(HHTP)2 and AgNPs@CuTCNQ systems was comprehended by using first-principles density functional theory (DFT) calculations and attributed to an interfacial electronic effect. Our work sheds new light on rationally designing synthetic modifications in thin films of MOFs to tune the electrical transport property.

The microwave-assisted synthesis of silica nanoparticles and their applications in a soy plant culture

A rapid and environmentally friendly synthesis of thermodynamically stable silica nanoparticles (SiO2-NPs) from heating via microwave irradiation (MW) compared to conductive heating is presented, as well as their evaluations in a soy plant culture. The parameters of time and microwave power were evaluated for the optimization of the heating program. Characterization of the produced nanomaterials was obtained from the dynamic light scattering (DLS) and zeta potential analyses, and the morphology of the SiO2-NPs was obtained by transmission electron microcopy (TEM) images. From the proposed synthesis, stable, monodisperse, and amorphous SiO2-NPs were obtained. Average sizes reported by DLS and TEM techniques were equal to 11.6 nm and 13.8 nm, respectively. The water-stable suspension of SiO2-NPs shows a zeta potential of -31.80 mV, and the homogeneously spheroidal morphology observed by TEM corroborates with the low polydispersity values (0.300). Additionally, the TEM with fast Fourier transform (FFT), demonstrates the amorphous characteristic of the nanoparticles. The MW-based synthesis is 30 times faster, utilizes 4-fold less reagents, and is ca. 18-fold cheaper than conventional synthesis through conductive heating. After the synthesis, the SiO2-NPs were added to the soil used for the cultivation of soybeans, and the homeostasis for Cu, Ni, and Zn was evaluated through the determination of their total contents by inductively coupled plasma mass spectrometry (ICP-MS) in soy leaves and also through bioimages obtained using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Although the results corroborate through both techniques, they also show the influence of these nanoparticles on the elemental distribution of the leaf surface with altered homeostasis of such elements from both transgenic crops compared to the control group.

Cellulose nanocrystals doped silver nanoparticles immobilized agar gum for efficient photocatalytic degradation of malachite green

The present study involves the synthesis of green functional material based on the silver nanoparticle (Ag NPs) doped cellulose nanocrystals (CNC) immobilized agar gum (AA) biopolymer using chemical coprecipitation method. The stabilization of Ag NPs in cellulose matrix and functionalization of the synthesized material through agar gum was analyzed using various spectroscopic techniques such as Fourier Transform Infrared (FTIR), Scanning electron microscope (SEM), Energy X-Ray diffraction (EDX), Photoelectron X-ray (XPS), Transmission electron microscope (TEM), Selected area energy diffraction (SAED) and ultraviolet visible (UV-Vis) spectroscopy. The XRD results suggested that the synthesized AA-CNC@Ag BNC material is composed of 47 % crystalline and 53 % amorphous nature having distorted hexagonal structure due to capping of Ag NPs by amorphous biopolymer matrix. The Debye-Scherer crystallite sized was calculated as 18 nm which is found in close agreement with TEM analysis (19 nm). The SAED yellow fringes simulates the miller indices values with XRD patterns and supported the surface functionalization of Ag NPs by biopolymer blend of AA-CNC. The XPS data supported the presence of Ag⁰ as indexed by Ag3d orbital corresponding to Ag3d_3/2 at 372.6 eV and Ag3d_5/2 at 366.6 eV. The surface morphological results revealed a flaky surface of the resultant material having well distributed Ag NPs in the matrix. The EDX and atomic concentration results given by XPS supported the presence if C, O and Ag in the bionanocomposite material. The UV-Vis results suggested that the material is both UV and visible light active having multiple SPR effects with anisotropy. The material was explored as a photocatalyst for remediation of wastewater contaminated by malachite green (MG) using advance oxidation process (AOP). Photocatalytic experiments were performed in order to optimize various reaction parameters such as irradiation time, pH, catalyst dose and MG concentration. The obtained results showed that almost 98.85 % of MG was degraded by using 20 mg of catalyst at pH 9 for 60 min of irradiation. The trapping experiments revealed that ^•O₂^- radicals played primary role in MG degradation. This study will provide new possible strategies for the remediation of wastewater contaminated by MG.

Antibacterial and anticancer activities of green-synthesized silver nanoparticles using Photinia glabra fruit extract

Aims: We prepared Photinia glabra (PG) aqueous fruit extract, utilized it to synthesize silver nanoparticles (PG-Ag NPs) and evaluated the antibacterial and anticancer activities of the nanoparticles (NPs). Materials & methods: Silver nitrate aqueous solution was reduced to PG-Ag NPs using aqueous PG fruit extract. NP shape, size, composition and functionalization were determined using transmission electron microscopy, x-ray photoelectron spectroscopy, Fourier transform infrared and x-ray diffraction. Results & conclusions: PG-Ag NPs were spherical, approximately 39-77 nm-sized, functionalized surfaces with notable antibacterial activity against both Escherichia coli and Staphylococcus aureus, with an MIC <30 ug/ml and cytotoxicity toward esophageal cancer cells, with IC50 values less than 20 ug/ml. PG-Ag@rt NPs have been shown to be a potent antibacterial and anticancer agent, and their enriched particle surfaces can be conjugated with other compounds for multibiomedical applications.

Green synthesis of Fe3O4 nanoparticles using Alliaceae waste (Allium sativum) for a sustainable landscape enhancement using support vector regression

The synthesis of metal nanoparticles using green chemistry methods has gained significant attention in the field of landscape enhancement. Researchers have paid close attention to the development of very effective green chemistry approaches for the production of metal nanoparticles (NPs). The primary goal is to create an environmentally sustainable technique for generating NPs. At the nanoscale, ferro- and ferrimagnetic minerals such as magnetite exhibit superparamagnetic properties (Fe3O4). Magnetic nanoparticles (NPs) have received increased interest in nanoscience and nanotechnology due to their physiochemical properties, small particle size (1-100 nm), and low toxicity. Biological resources such as bacteria, algae, fungus, and plants have been used to manufacture affordable, energy-efficient, non-toxic, and ecologically acceptable metallic NPs. Despite the growing demand for Fe3O4 nanoparticles in a variety of applications, typical chemical production processes can produce hazardous byproducts and trash, resulting in significant environmental implications. The purpose of this study is to look at the ability of Allium sativum, a member of the Alliaceae family recognized for its culinary and medicinal benefits, to synthesize Fe3O4 NPs. Extracts of Allium sativum seeds and cloves include reducing sugars like glucose, which may be used as decreasing factors in the production of Fe3O4 NPs to reduce the requirement for hazardous chemicals and increase sustainability. The analytic procedures were carried out utilizing machine learning as support vector regression (SVR). Furthermore, because Allium sativum is widely accessible and biocompatible, it is a safe and cost-effective material for the manufacture of Fe3O4 NPs. Using the regression indices metrics of root mean square error (RMSE) and coefficient of determination (R2), the X-ray diffraction (XRD) study revealed the lighter, smoother spherical forms of NPs in the presence of aqueous garlic extract and 70.223 nm in its absence. The antifungal activity of Fe3O4 NPs against Candida albicans was investigated using a disc diffusion technique but exhibited no impact at doses of 200, 400, and 600 ppm. This characterization of the nanoparticles helps in understanding their physical properties and provides insights into their potential applications in landscape enhancement.

Nanomedicine for drug resistant pathogens and COVID-19 using mushroom nanocomposite inspired with bacteriocin – A Review

Multidrug resistant (MDR) pathogens have become a major global health challenge and have severely threatened the health of society. Current conditions have gotten worse as a result of the COVID-19 pandemic, and infection rates in the future will rise. It is necessary to design, respond effectively, and take action to address these challenges by investigating new avenues. In this regard, the fabrication of metal NPs utilized by various methods, including green synthesis using mushroom, is highly versatile, cost-effective, eco-compatible, and superior. In contrast, biofabrication of metal NPs can be employed as a powerful weapon against MDR pathogens and have immense biomedical applications. In addition, the advancement in nanotechnology has made possible to modify the nanomaterials and enhance their activities. Metal NPs with biomolecules composite to prevents their microbial adhesion and kills the microbial pathogens through biofilm formation. Bacteriocin is an excellent antimicrobial peptide that works well as an augmentation substance to boost the antimicrobial effects. As a result, we concentrate on the creation of new, eco-compatible mycosynthesized metal NPs with bacteriocin nanocomposite via electrostatic, covalent, or non-covalent bindings. The synergistic benefits of metal NPs with bacteriocin to combat MDR pathogens and COVID-19, as well as other biomedical applications, are discussed in this review. Moreover, the importance of the adverse outcome pathway (AOP) in risk analysis of manufactured metal nanocomposite nanomaterial and their future possibilities also discussed.

A green and fast microwave-assisted synthesis of selenium nanoparticles and their characterization under gastrointestinal conditions using mass spectrometry

We present a novel microwave-assisted green synthesis of selenium nanoparticles (SeNPs) using yeast extract as source of a non-toxic reducing and capping agents. Effects of synthesis and gastrointestinal digestion conditions on the biogenic Se particle size distribution and number concentration using SP ICP MS were evaluated. The median equivalent diameter of SeNPs varied depending on the synthesis conditions. Upon incubation in simulated gastric juice, the increase of SeNPs size was observed, whereas after simulated intestinal juice addition, their size came back close to the initial value. The biomolecules contained in yeast extract, which play predominant role in the synthesis of SeNPs, were identified by non-targeted qualitative analysis using LC Orbitrap ESI MS. The use of the state-of-the-art MS techniques allowed both the comprehensive assessment of the processes leading to the SeNPs formation and the evaluation of their behavior under gastrointestinal conditions which is of utmost importance for their use as a novel selenium source.

Yeast Extract: Characteristics, Production, Applications and Future Perspectives

Yeast extract is a product prepared mainly from waste brewer's yeast, which is rich in nucleotides, proteins, amino acids, sugars and a variety of trace elements, and has the advantages of low production cost and abundant supply of raw material. Consequently, yeast extracts are widely used in various fields as animal feed additives, food flavoring agents and additives, cosmetic supplements, and microbial fermentation media; however, their full potential has not yet been realized. To improve understanding of current research knowledge, this review summarizes the ingredients, production technology, and applications of yeast extracts, and discusses the relationship between their properties and applications. Developmental trends and future prospects of yeast extract are also previewed, with the aim of providing a theoretical basis for the development and expansion of future applications.

Activities against Lung Cancer of Biosynthesized Silver Nanoparticles: A Review

Nanomedicine is an interdisciplinary field where nanostructured objects are applied to treat or diagnose disease. Nanoparticles (NPs) are a special class of materials at nanometric scale that can be prepared from lipids, polymers, or noble metals through bottom-up approaches. Biological synthesis is a reliable, sustainable, and non-toxic bottom-up method that uses phytochemicals, microorganisms, and enzymes to induce the reduction of metal ions into NPs. Silver (Ag) NPs exhibit potent therapeutic properties that can be exploited to overcome the limitations of current treatment modalities for human health issues such as lung cancer (LC). Here, we review the preparation of AgNPs using biological synthesis and their application against LC using in vitro and in vivo models. An overview of the staging, diagnosis, genetic mutations, and treatment of LC, as well as its main subtypes, is presented. A summary of the reaction mechanisms of AgNPs using microbial cell cultures, plant extracts, phytochemicals, and amino acids is included. The use of capping agents in the biosynthesis of AgNPs with anticancer activity is also detailed. The history and biological activities of metal-based nanostructures synthesized with gold, copper, palladium, and platinum are considered. The possible anticancer mechanisms of AgNPs against LC models are covered. Our perspective about the future of AgNPs in LC treatment and nanomedicine is added.

Application of silver nanoparticles synthesized through varying biogenic and chemical methods for wastewater treatment and health aspects

Nanotechnology uses biological and non-biological materials to create new systems at the nanoscale level. In recent years, the use of silver nanomaterials has attracted worldwide attention thanks to their wide range of applications as catalysts in several environmental processes including the degradation of organic pollutants and medicinal biotechnology. This study reports the synthesis of silver nanoparticles (AgNPs) through different methods including the biogenic methods based on leaf extract of Conocarpus erectus and a bacterial strain Pseudomonas sp. as well as chemically based abiotic method and comparison of their dye degradation potential. The synthesis of AgNPs in all samples was confirmed by UV-visible spectroscopy peaks at 418-420 nm. Using scanning electrom microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray differaction (XRD), and X-ray photoelectron spectroscopy (XPS), the biologically synthesized AgNPs were characterized as spherical shape of material with capping proteins that were involved in the stabilization of nanoparticles (NPs). The biologically synthesized AgNPs showed higher degradation (< 90%) of dyes as compared to chemically synthesized NPs. A prominent reduction of total dissolved solids (TDS), electrical conductivity (EC), pH, and chemical oxygen demand (COD) in textile wastewater spiked with reactive black 5 and reactive red 120 was observed by biologically synthesized AgNPs. AgNPs synthesized by Conocarpus erectus and Pseudomonas sp. also showed better characteristic anticancer and antidiabetic activities as compared to chemically synthesized ones. The results of this study suggested that C. erectus and Pseudomonas sp. based AgNPs can be exploited as an eco-friendly and cost-efficient materials to treat the wastewater and potential other polluted environments as well as to serve the medicinal field.

Biogenic metallic nanoparticles as enzyme mimicking agents

The use of biological systems such as plants, bacteria, and fungi for the synthesis of nanomaterials has emerged to fill the gap in the development of sustainable methods that are non-toxic, pollution-free, environmentally friendly, and economical for synthesizing nanomaterials with potential in biomedicine, biotechnology, environmental science, and engineering. Current research focuses on understanding the characteristics of biogenic nanoparticles as these will form the basis for the biosynthesis of nanoparticles with multiple functions due to the physicochemical properties they possess. This review briefly describes the intrinsic enzymatic mimetic activity of biogenic metallic nanoparticles, the cytotoxic effects of nanoparticles due to their physicochemical properties and the use of capping agents, molecules acting as reducing and stability agents and which aid to alleviate toxicity. The review also summarizes recent green synthetic strategies for metallic nanoparticles.

Antifungal Activity of Biosynthesized Silver Nanoparticles (AgNPs) against Aspergilli Causing Aspergillosis: Ultrastructure Study

Currently, nanoparticles and nanomaterials are widely used for biomedical applications. In the present study, silver nanoparticles (AgNPs) were successfully biosynthesized using a cell-free extract (CFE) of Bacillus thuringiensis MAE 6 through a green and ecofriendly method. The size of the biosynthesized AgNPs was 32.7 nm, and their crystalline nature was confirmed by XRD, according to characterization results. A surface plasmon resonance spectrum of AgNPs was obtained at 420 nm. Nanoparticles were further characterized using DLS and FTIR analyses, which provided information on their size, stability, and functional groups. AgNPs revealed less cytotoxicity against normal Vero cell line [IC₅₀ = 155 μg/mL]. Moreover, the biosynthesized AgNPs exhibited promising antifungal activity against four most common Aspergillus, including Aspergillus niger, A. terreus, A. flavus, and A. fumigatus at concentrations of 500 μg/mL where inhibition zones were 16, 20, 26, and 19 mm, respectively. In addition, MICs of AgNPs against A. niger, A. terreus, A. flavus, and A. fumigatus were 125, 62.5, 15.62, and 62.5 μg/mL, respectively. Furthermore, the ultrastructural study confirmed the antifungal effect of AgNPs, where the cell wall's integrity and homogeneity were lost; the cell membrane had separated from the cell wall and had intruded into the cytoplasm. In conclusion, the biosynthesized AgNPs using a CFE of B. thuringiensis can be used as a promising antifungal agent against Aspergillus species causing Aspergillosis.

Three-Dimensional Reduced Graphene Oxide Hybrid Nano-Silver Scaffolds with High Antibacterial Properties

In recent years, hazardous wastewater treatment has been a complex and global problem. In this work, by considering the antimicrobial activity of Ag nanoparticles (AgNPs) and reduced graphene oxide (rGO), we constructed an antibacterial device (G-AgNP) with AgNPs conformably deposited onto a 3D scaffold of reduced graphene oxide in situ. The major limitation, which is difficult to recycle, of two-dimensional graphene-silver composite materials in previous studies is improved. Characterization techniques, SEM, TEM, XRD, and XPS, confirmed the synthesis of nanocomposites. Attributed to its larger specific area, more active sites, and synergistic enhancement, the G-AgNP device demonstrated the best bacterial removal capacity, with an antibacterial rate for both E. coli and S. aureus as high as 100% at quite low AgNP contents. The reported G-AgNP has potential application as a wearable sewage treatment device and for the protection of wearable sensors as a promising sterilizing candidate based on its high and stable antibacterial efficiency.

Biosynthesis and antibacterial activity of silver nanoparticles using Flos Sophorae Immaturus extract

The current study proposes a green synthesis method for silver nanoparticles (Ag NPs) using various concentrations of Flos Sophorae Immaturus extract as reducing and capping agents. The UV-Visible (UV-Vis) spectroscopy, X-ray Diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), Dynamic Light Scattering (DLS) and Transmission Electron Microscopy (TEM) were used to characterize resulting brown nanopowder. The as-prepared Ag NPs had a high negative zeta potential value of ∼ -38 mv, indicating the existence of electrostatic stabilization. The average sizes of ∼27.8 nm, 28.5 nm, 34.3 nm and 36.5 nm were measured by TEM. Moreover, FTIR and XPS analyses validated the production and chemical composition of Ag NPs from silver nitrate. The antibacterial activity of Ag NPs was examined against E. coli, P. aeruginosa, and S. aureus using agar well diffusion and the minimum inhibitory concentration (MIC) method. The antibacterial activity of the as-prepared Ag NPs from 4 mL extract was excellent against E. coli, P. aeruginosa, and S. aureus and the MIC values were 31.250, 15.625, and 31.250 mg/L, respectively. Based on these results, this study proposes a practical approach for the synthesis of Ag NPs in the industry and medical fields.

Characterization of the biosynthesized intracellular and extracellular plasmonic silver nanoparticles using Bacillus cereus and their catalytic reduction of methylene blue

The biosynthesis of silver nanoparticles (Ag NPs) has been studied in detail using two different approaches. For the first time, Bacillus cereus is used for one-pot biosynthesis of capsulated Ag NPs, using both intracellular and extracellular approaches. To discriminate between the produced nanostructures by these two approaches, their structures, nanomorphologies, optical properties, hydrodynamic sizes and zeta potentials are studied using different techniques. Fourier-transform infrared spectroscopy was used to identify the bioactive components responsible for the reduction of Ag⁺ ions into Ag and the growth of stable Ag NPs. Scanning and transmission electron microscopy images displayed spherical and polygon nanomorphology for the intracellular and extracellular biosynthesized Ag NPs. For intracellular and extracellular biosynthesized Ag NPs, a face-centred cubic structure was observed, with average crystallite sizes of 45.4 and 90.8 nm, respectively. In comparison to the noncatalytic reduction test, the catalytic activities of intracellular and extracellular biosynthesized Ag NPs were explored for the reduction of highly concentrated MB dye solution. Extracellular Ag NPs achieved 100% MB reduction efficacy after around 80 min, compared to 50.6% and 24.1% in the presence and absence of intracellular Ag NPs, respectively. The rate of MB reduction was boosted by 22 times with the extracellular catalyst, and by 3 times with the intracellular catalyst. Therefore, the extracellular production process of Ag NPs utilizing Bacillus cereus bacteria might be applied in the industry as a cost-effective way for eliminating the toxic MB dye.

Green Synthesis of Ag NPs Using Ustilago maydis as Reducing and Stabilizing Agent

Ustilago maydis (UM) is a fungus that grows naturally on Zea mays; it reduces the corn yields, and thus, it represents huge economic loss; however, it can be used as an exotic food, and in the present work, it is successfully used as a reducing and stabilizing agent for the preparation of silver nanoparticles (Ag NPs) due to its content of amino acids and biosurfactants. The effects of the concentration of UM aqueous extract, pH, and sunlight on the particle size, surface plasmon resonance, stability, and morphology of Ag NPs obtained by green synthesis were evaluated. A green reduction was observed only in presence of UM, and colloidal Ag NPs were obtained with or without the presence of sunlight; nevertheless, continuous sunlight exposure greatly increased the reaction rate. Ag NPs tend to increase in size from 153 nm to 1400 nm at a higher pH and a greater amount of UM, and also, UM tends to stabilize the Ag NPs preventing their agglomeration according to measurement of zeta potential (−10.75 ± 0.84 mV) and SEM observation; furthermore, surface plasmon resonances were more intense between 400 and 480 nm of wavelength adding greater amount of UM. This study concludes that UM not only reduces AgNO3 but also acts as stabilizer of Ag NPs.

Investigation of Cytotoxicity of Biosynthesized Colloidal Nanosilver against Local Leishmania tropica: In Vitro Study

Leishmaniasis is one of the biggest health problems in the world. Traditional therapeutic methods still depend on a small range of products, mostly chemically. However, the treatment with these drugs is expensive and can cause serious adverse effects, and they have inconsistent effectiveness due to the resistance of parasites to these drugs. The treatment of leishmanial disease has always been a challenge for researchers. The development of nanoscale metals such as silver has attracted significant attention in the field of medicine. The unique characteristic features of silver nanoparticles (AgNPs) make them effective antileishmanial agents. In recent years, green nanotechnology has provided the development of green nanoparticle-based treatment methods for Leishmaniasis. Although there are many studies based on green nanoparticles against Leishmania parasites, this is the first study on the antileishmanial effect of biosynthesized AgNPs using an aqueous extract of Eucalyptus camaldulensis leaves (AEECL) as a reducing agent of silver ions. Different parameters such as AgNO3 concentration, AEECL concentration, and reaction time were studied to investigate the optimum factors for the preparation of stable and small-sized silver nanoparticles. The spherical shape of colloidal nanosilver (CN-Ag) was confirmed by atomic force microscope (AFM) and scanning electron microscope (SEM) images with sizes of 27 and 12 nm, respectively. A high density of nanoparticles with a small size of 10 nm has been confirmed from dynamic light scattering (DLS) analysis. The zeta potential value of 23 mV indicated that colloidal silver nanoparticles were stable. The nano-tracker analysis (NTA) showed the Brownian motion of silver nanoparticles with a hydrodynamic diameter of 31 nm. The antioxidant property of CN-Ag was determined using the stable radical 2,2-Diphenyl-1-picrylhydrazyl (DPPH) assay. In this study, a significant cytotoxic effect of biosynthesized CN-Ag has been shown against Leishmania tropica parasites at low concentrations (1.25, 2.5, and 3.75 µg/mL). These results could be used as a future alternative drug or could be a supportive treatment for Leishmaniasis.

Green Synthesis and Characterization of Silver Nanoparticles with High Antibacterial Activity Using Cell Extracts of Cyanobacterium Pseudanabaena/Limnothrix sp

In this work, we demonstrated the ability of the cyanobacterium Pseudanabaena/Limnothrix sp. to produce ultra-small silver nanoparticlesin the forms of metallic silver (Ag⁰) and silver oxides (Ag_xO_y) via a facile green synthetic process. The biological compounds in the cyanobacterial cellular extract acted both as reducing agents for silver ions and functional stabilizing agents for the silver nanoparticles. Furthermore, the antibacterical activity of the as-synthesized nanoparticles against Gram-negative Escherichia coli and Gram-positive Corynebacterium glutamicum bacterial cells was evaluated. The experimental results revealed a remarkable bactericidal activity of the nanoparticles that was both time-dependent and dose-dependent. In addition to their excellent bactericidal properties, the developed nanoparticles can be used as nanosupports in various environmental, biological, and medical applications.

Polydopamine stabilizes silver nanoparticles as a SERS substrate for efficient detection of myocardial infarction

Rapid and accurate detection of myocardial infarction (MI) can boost the patient's chance of survival. Surface enhanced Raman scattering (SERS) is an outstanding diagnostic technique because of its strong light stability, high resolution, and qualitative and quantitative analysis based on the characteristic fingerprint. However, its reliability, stability and specificity remain to be improved, especially in the quantitative analysis of serum samples. In this study, we developed in situ silver nanoparticles (Ag NPs) on the surface of polydopamine (PDA) as a SERS substrate and found that PDA could act as a reducing agent to support the nucleation and growth of Ag NPs and control the distance and aggregation of Ag NPs to stabilize the Raman signal. In a standard phosphate buffered saline (PBS) environment, PDA@Ag could reach a low detection limit of 0.01 ng mL^-1 cardiac troponin I (cTn I) with a good linear relationship. At the same time, the PDA@Ag substrate also possessed excellent stability, specificity and biocompatibility for cTn I detection. In addition, we verified the application potentiality of PDA@Ag in real serum samples and found that the performance of SERS was almost the same as that in PBS. This excellent detection performance of PDA@Ag could be attributed to both the enhanced electromagnetic field and the increased Raman cross-section, dominated by the gap distance between Ag NPs, reaction force between the antigen and the antibody and excellent biocompatibility and reducibility of PDA. In conclusion, this work may provide a new perspective for the in situ synthesis and growth of a uniform SERS substrate on the carrier to achieve the stability and specificity of SERS-based biological detection of MI.

Antibacterial Activity of Green Synthesised Silver Nanoparticles on Saccharomyces cerevisiae

Green synthesis of nanoparticles is a widely researched and popular direction in the development of nanotechnology. It is a simple, cheap and effective method for obtaining nanoparticles with interesting biological properties. In light of the development of antibiotic resistance to important clinical strains of bacteria, this method was used in the present study to obtain silver nanoparticles with antibacterial activity. The aim of this study was to synthesise silver nanoparticles with antibacterial action by yeast in a process known as “green synthesis”. We are also considering the prospect of using silver nanoparticles as an antibacterial substance for drug development. The production of nanoparticles was confirmed by UV spectroscopy. Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922 test strains and Staphylococcus aureus 1536 and Klebsiella pneumoniae 520 clinical isolates were used to study the antibacterial effect. The effect of synthesised nanoparticles on the metabolic activity of bacterial cells and their ability to adhere, as well as the minimum inhibitory concentrations (MICs) of synthesised nanoparticles for each of the strains, were determined. Following UV spectroscopy, the nanoparticles obtained were found to have a pronounced peak in optical absorption at 400 nm, corresponding to the plasmon resonance of silver nanoparticles, and demonstrated a high antibacterial effect against all the strains studied.

Application of Green Gold Nanoparticles in Cancer Therapy and Diagnosis

Nanoparticles are currently used for cancer theranostics in the clinical field. Among nanoparticles, gold nanoparticles (AuNPs) attract much attention due to their usability and high performance in imaging techniques. The wide availability of biological precursors used in plant-based synthesized AuNPs allows for the development of large-scale production in a greener manner. Conventional cancer therapies, such as surgery and chemotherapy, have significant limitations and frequently fail to produce satisfying results. AuNPs have a prolonged circulation time, allow easy modification with ligands detected via cancer cell surface receptors, and increase uptake through receptor-mediated endocytosis. To exploit these unique features, studies have been carried out on the use of AuNPs as contrast agents for X-ray-based imaging techniques (i.e., computed tomography). As nanocarriers, AuNPs synthesized by nontoxic and biocompatible plants to deliver therapeutic biomolecules could be a significant stride forward in the effective treatment of various cancers. Fluorescent-plant-based markers, including AuNPs, fabricated using Medicago sativa, Olax Scandens, H. ambavilla, and H. lanceolatum, have been used in detecting cancers. Moreover, green synthesized AuNPs using various extracts have been applied for the treatment of different types of solid tumors. However, the cytotoxicity of AuNPs primarily depends on their size, surface reactivity, and surface area. In this review, the benefits of plant-based materials in cancer therapy are firstly explained. Then, considering the valuable position of AuNPs in medicine, the application of AuNPs in cancer therapy and detection is highlighted with an emphasis on limitations faced by the application of such NPs in drug delivery platforms.

Green approaches in synthesising nanomaterials for environmental nanobioremediation: Technological advancements, applications, benefits and challenges

Green synthesis approaches of nanomaterials (NMs) have received considerable attention in recent years as it addresses the sustainability issues posed by conventional synthesis methods. However, recent works of literature do not present the complete picture of biogenic NMs. This paper addresses the previous gaps by providing insights into the stability and toxicity of NMs, critically reviewing the various biological agents and solvents required for synthesis, sheds light on the factors that affect biosynthesis, and outlines the applications of NMs across various sectors. Despite the advantages of green synthesis, current methods face challenges with safe and appropriate solvent selection, process parameters that affect the synthesis process, nanomaterial cytotoxicity, bulk production and NM morphology control, tedious maintenance, and knowledge deficiencies. Consequently, the green synthesis of NMs is largely trapped in the laboratory phase. Nevertheless, the environmental friendliness, biocompatibility, and sensitivities of the resulting NMs have wider applications in biomedical science, environmental remediation, and consumer industries. To the scale-up application of biogenic NMs, future research should be focused on understanding the mechanisms of the synthesis processes, identifying more biological and chemical agents that can be used in synthesis, and developing the practicality of green synthesis at the industrial scale, and optimizing the factors affecting the synthesis process.

Role of Biogenic Capping Agents in the Synthesis of Metallic Nanoparticles and Evaluation of Their Therapeutic Potential

The biomedical properties of nanoparticles have been the area of focus for contemporary science; however, there are issues concerning their long-term toxicities. Recent trends in nanoparticle fabrication and surface manipulation, the use of distinctive biogenic capping agents, have allowed the preparation of nontoxic, surface-functionalized, and monodispersed nanoparticles for medical applications. These capping agents act as stabilizers or binding molecules that prevent agglomeration and steric hindrance, alter the biological activity and surface chemistry, and stabilize the interaction of nanoparticles within the preparation medium. Explicit features of nanoparticles are majorly ascribed to the capping present on their surface. The present review article is an attempt to compile distinctive biological capping agents deployed in the synthesis of metal nanoparticles along with the medical applications of these capped nanoparticles. First, this innovative review highlights the various biogenic capping agents, including biomolecules and biological extracts of plants and microorganisms. Next, the therapeutic applications of capped nanoparticles and the effect of biomolecules on the efficiency of the nanoparticles have been expounded. Finally, challenges and future directions on the use of biological capping agents have been concluded. The goal of the present review article is to provide a comprehensive report to researchers who are looking for alternative biological capping agents for the green synthesis of important metallic nanoparticles.

Green Synthesis of Nano Zinc Oxide/Nanohydroxyapatite Composites Using Date Palm Pits Extract and Eggshells: Adsorption and Photocatalytic Degradation of Methylene Blue

In this study, zinc oxide nanoparticles (ZnO) and nanohydroxyapatite (NHAP) were prepared in the presence of date palm pits extract (DPPE) and eggshells, respectively. Another four nanocomposites were prepared from ZnO and NHAP in different ratios (ZP13, ZP14, ZP15, and ZP16). DPPE and all nanomaterials were characterized using GC-MS, zeta potentials, particle size distributions, XRD, TEM, EDX, FTIR, and pH_PZC. The characterization techniques confirmed the good distribution of ZnO nanoparticles on the surface of NHAP in the prepared composites. Particles were found to be in the size range of 42.3–66.1 nm. The DPPE analysis confirmed the presence of various natural chemical compounds which act as capping agents for nanoparticles. All the prepared samples were applied in the adsorption and photocatalytic degradation of methylene blue under different conditions. ZP14 exhibited the maximum adsorption capacity (596.1 mg/g) at pH 8, with 1.8 g/L as the adsorbent dosage, after 24 h of shaking time, and the static adsorption kinetic process followed a PSO kinetic model. The photocatalytic activity of ZP14 reached 91% after 100 min of illumination at a lower MB concentration (20 mg/L), at pH 8, using 1.5 g/L as the photocatalyst dosage, at 25 °C. The photocatalytic degradation of MB obeyed the Langmuir–Hinshelwood first-order kinetic model, and the photocatalyst reusability exhibited a slight loss in activity (~4%) after five cycles of application.

Green Synthesis of Metal and Metal Oxide Nanoparticles: Principles of Green Chemistry and Raw Materials

Increased request for metal and metal oxide nanoparticles nanoparticles has led to their large-scale production using high-energy methods with various toxic solvents. This cause environmental contamination, thus eco-friendly “green” synthesis methods has become necessary. An alternative way to synthesize metal nanoparticles includes using bioresources, such as plants and plant products, bacteria, fungi, yeast, algae, etc. “Green” synthesis has low toxicity, is safe for human health and environment compared to other methods, meaning it is the best approach for obtaining metal and metal oxide nanoparticles. This review reveals 12 principles of “green” chemistry and examples of biological components suitable for “green” synthesis, as well as modern scientific research of eco-friendly synthesis methods of magnetic and metal nanoparticles. Particularly, using extracts of green tea, fruits, roots, leaves, etc., to obtain Fe3O4 NPs. The various precursors as egg white (albumen), leaf and fruit extracts, etc., can be used for the „green” synthesis of spinel magnetic NPs. “Green” nanoparticles are being widely used as antimicrobials, photocatalysts and adsorbents. “Green” magnetic nanoparticles demonstrate low toxicity and high biocompatibility, which allows for their biomedical application, especially for targeted drug delivery, contrast imaging and magnetic hyperthermia applications. The synthesis of silver, gold, platinum and palladium nanoparticles using extracts from fungi, red algae, fruits, etc., has been described.

Nanotechnology as a Processing and Packaging Tool to Improve Meat Quality and Safety

Nanoparticles are gaining momentum as a smart tool towards a safer, more cost-effective and sustainable food chain. This study aimed to provide an overview of the potential uses, preparation, properties, and applications of nanoparticles to process and preserve fresh meat and processed meat products. Nanoparticles can be used to reinforce the packaging material resulting in the improvement of sensory, functional, and nutritional aspects of meat and processed meat products. Further, these particles can be used in smart packaging as biosensors to extend the shelf-life of fresh and processed meat products and also to monitor the final quality of these products during the storage period. Nanoparticles are included in product formulation as carriers of health-beneficial and/or functional ingredients. They showed great efficiency in encapsulating bioactive ingredients and preserving their properties to ensure their functionality (e.g., antioxidant and antimicrobial) in meat products. As a result, nanoparticles can efficiently contribute to ensuring product safety and quality whilst reducing wastage and costs. Nevertheless, a wider implementation of nanotechnology in meat industry is highly related to its economic value, consumers' acceptance, and the regulatory framework. Being a novel technology, concerns over the toxicity of nanoparticles are still controversial and therefore efficient analytical tools are deemed crucial for the identification and quantification of nanocomponents in meat products. Thus, migration studies about nanoparticles from the packaging into meat and meat products are still a concern as it has implications for human health associated with their toxicity. Moreover, focused economic evaluations for implementing nanoparticles in meat packaging are crucial since the current literature is still scarce and targeted studies are needed before further industrial applications.

Synthesis of silver nanoparticles using Plantago lanceolata extract and assessing their antibacterial and antioxidant activities

Silver nanoparticles (Ag. NPs) have shown a biological activity range, synthesized under different environment-friendly approaches. Ag. NPs were synthesized using aqueous crude extract (ACE) isolated from Plantago lanceolata. The ACE and Ag. NPs were characterized and assessed their biological and antioxidant activities. The existence of nanoparticles (NPs) was confirmed by color shift, atomic force microscopy (AFM), and UV-Vis's spectroscopy. The FT-IR analysis indicated the association of biomolecules (phenolic acid and flavonoids) to reduce silver (Ag⁺) ions. The SEM study demonstrated a sphere-shaped and mean size in the range of 30 ± 4 nm. The EDX spectrum revealed that the Ag. NPs were composed of 54.87% Ag with 20 nm size as identified by SEM and TEM. AFM has ended up being exceptionally useful in deciding morphological elements and the distance across of Ag. NPs in the scope of 23-30 nm. The TEM image showed aggregations of NPs and physical interaction. Ag. NPs formation also confirmed by XPS, DRS and BET studies. Ag. NPs showed efficient activity as compared to ACE, and finally, the bacterial growth was impaired by biogenic NPs. The lethal dose (LD₅₀) of Ag. NPs against Agrobacterium tumefaciens, Proteus vulgaris, Staphylococcus aureus, and Escherichia coli were 45.66%, 139.71%, 332.87%, and 45.54%, with IC50 (08.02 ± 0.68), (55.78 ± 1.01), (12.34 ± 1.35) and (11.68 ± 1.42) respectively, suppressing the growth as compared to ACE. The antioxidant capacity, i.e., 2,2-diphenyl-1-picrylhydrazyl (DPPH) of Ag. NPs were assayed. ACE and Ag. NPs achieved a peak antioxidant capacity of 62.43 ± 2.4 and 16.85 ± 0.4 μg mL^-1, compared to standard (69.60 ± 1.1 at 100 μg mL^-1) with IC₅₀ (369.5 ± 13.42 and 159.5 ± 10.52 respectively). Finally, the Ag. NPs synthesized by P. lanceolata extract have an excellent source of bioactive natural products (NP). Outstanding antioxidant, antibacterial activities have been shown by NPs and can be used in various biological techniques in future research.

Synthetic preparations and atomic scale engineering of silver nanoparticles for biomedical applications

Owing to their peculiar oxidative effect, silver cations (Ag⁺) are well known for their antimicrobial properties and explored as therapeutic agents for biomedical applications. Size control with improved dispersion and stability are the key factors of Ag NPs (silver nanoparticles) to be used in biomedical applications. Silver based nano-materials are highly efficient due to their biological, chemical and physical properties in comparison with bulk silver. Atomic scale fabrication is achieved by rearranging the internal components of a material, in turn, influencing the mechanical, electrical, magnetic, thermal and chemical properties. For instance, size and shape have a strong impact on the optical, thermal and catalytic properties of Ag NPs. Such properties can be tuned by controlling the surface/volume ratio of Ag nanostructures with a small size (ideally <100 nm), in turn showing peculiar biological activity different from that of bulk silver. Silver nanomaterials such as nanoparticles, thin films and nanorods can be synthesized by various physical, chemical and biological methods whose most recent implementations will be described in this review. By controlling the structure-functionality relationship, silver based nano-materials have high potential for commercialization in biomedical applications. Antimicrobial, antifungal, antiviral, and anti-inflammatory Ag NPs can be applied in several fields such as pharmaceutics, sensors, coatings, cosmetics, wound healing, bio-labelling agents, antiviral drugs, and packaging.

Polyvinyl-Pyrrolidone-Coated Silver Nanoparticles-The Colloidal, Chemical, and Biological Consequences of Steric Stabilization under Biorelevant Conditions

(1) Background: Several properties of silver nanoparticles (AgNPs), such as cytotoxic, anticancer, and antimicrobial activities, have been subjects of intense research; however, important aspects such as nanoparticle aggregation are generally neglected, although a decline in colloidal stability leads to a loss of the desired biological activities. Colloidal stability is affected by pH, ionic strength, or a plethora of biomolecules that interact with AgNPs under biorelevant conditions. (2) Methods: As only a few studies have focused on the relationship between aggregation behavior and the biological properties of AgNPs, here, we have systematically evaluated this issue by completing a thorough analysis of sterically (via polyvinyl-pyrrolidone (PVP)) stabilized AgNPs that were subjected to different circumstances. We assessed ultraviolet-visible light absorption, dynamic light scattering, zeta potential measurements, in vitro cell viability, and microdilution assays to screen both colloidal stability as well as bioactivity. (3) Results: The results revealed that although PVP provided outstanding biorelevant colloidal stability, the chemical stability of AgNPs could not be maintained completely with this capping material. (4) Conclusion: These unexpected findings led to the realization that stabilizing materials have more profound importance in association with biorelevant applications of nanomaterials than just being simple colloidal stabilizers.

The role of morphology, shell composition and protein corona formation in Au/Fe3O4 composite nanoparticle mediated macrophage responses

The great interest in using nanoparticles (NPs) for biomedical applications is transversal to various materials despite the poorly understood correlation between their physicochemical properties and effects on the immune system. NPs, such as gold and Fe₃O₄, are generally regarded as safe, but the immunotoxicological profile of Au/Fe₃O₄ composite NPs with different physicochemical properties is not well documented. This study investigated the biological impact of Au/Fe₃O₄ composite NPs with different morphologies (spherical core-shell and flower-like) and shell composition in vitro to analyze their potential cytotoxic effects and inflammatory responses on RAW 264.7 cells. Au/Fe₃O₄ composite NPs with a flower-like structure (FLNPs) induce a pronounced reduction in cell viability compared with Au/Fe₃O₄ composite NPs with a spherical core-shell structure (CSNPs). The increased production of reactive oxygen species, which damages cellular membranes, might contribute to the cytotoxicity effect of FLNPs. However, CSNPs presented more RAW 264.7 cell adhesion and uptake than FLNPs. Remarkably, a significant TNF-α release was observed with CSNP treated RAW 264.7 cells other than that of FLNPs. Protein corona analysis revealed the adsorption of a distinct amount and profile of proteins on the surface of CSNPs and FLNPs. Given the similar particle size and ζ-potential of CSNPs and FLNPs under the cell culture condition, results indicate that the impact of Au/Fe₃O₄ composite NPs on the macrophage activity highly depends on their morphology, shell composition and protein corona profile.

Au@Ag Core@Shell Nanoparticles Synthesized with Rumex hymenosepalus as Antimicrobial Agent

In this work, we used a sequential method of synthesis for gold-silver bimetallic nanoparticles with core@shell structure (Au@AgNPs). Rumex hymenosepalus root extract (Rh), which presents high content in catechins and stilbenes, was used as reductor agent in nanoparticles synthesis. Size distribution obtained by Transmission Electron Microscopy (TEM) gives a mean diameter of 36 ± 11 nm for Au@AgNPs, 24 ± 4 nm for gold nanoparticles (AuNPs), and 13 ± 3 nm for silver nanoparticles (AgNPs). The geometrical shapes of NPs were principally quasi-spherical. The thickness of the silver shell over AuNPs is around 6 nm and covered by active biomolecules onto the surface. Nanoparticles characterization included high angle annular dark field images (HAADF) recorded with a scanning transmission electron microscope (STEM), Energy-Dispersive X-ray Spectroscopy (EDS), X-Ray Diffraction (XRD), UV-Vis Spectroscopy, Zeta Potential, and Dynamic Light Scattering (DLS). Fourier Transform Infrared Spectrometer (FTIR), and X-ray Photoelectron Spectroscopy (XPS) show that nanoparticles are stabilized by extract molecules. A growth kinetics study was performed using the Gompertz model for microorganisms exposed to nanomaterials. The results indicate that AgNPs and Au@AgNPs affect the lag phase and growth rate of Escherichia coli and Candida albicans in a dose-dependent manner, with a better response for Au@AgNPs.