Preparation of Nano-Copper Sulfide and Its Adsorption Properties for 17α-Ethynyl Estradiol

Chitosan/copper sulfide nanoparticles (CS/CuSNPs) hybrid fibers with improved mechanical and photo-thermal conversion properties via tuning CuSNPs' morphological structures

Conventional textiles are inadequate for maintaining warmth in extremely cold conditions. Therefore, the development of photo-thermal fibers for personal thermal management textiles has emerged as an urgent need. Herein, novel chitosan/copper sulfide nanoparticles (CS/CuSNPs) hybrid fibers with photo-thermal function were fabricated successfully. Significantly, our study demonstrated that the tensile and photo-thermal conversation properties of the CS/CuSNPs hybrid fibers could be effectively regulated by altering the CuSNPs` morphological structures. Compared with other CuSNPs (tube-like, sphere-like, and flower-like), the plate-like CuSNPs with smooth surfaces and uniform nanometer size played a significant role by scattering incident light in the fibers as a secondary light source for CuSNPs absorbance. Thus, under IR light irradiation at a power density of 1.0 W/cm2, the surface temperature of CS/0.1 wt% plate-like CuSNPs hybrid fibers sharply increased by 27.6 °C, which was more than 4 times of the pure CS fibers. And the breaking strength and initial modulus of CS/0.1 wt% plate-like CuSNPs hybrid fibers increased by more than 18.37 and 6.88 % compared with the nascent CS fibers. This study develops a novel and effective strategy to tune the photo-thermal and tensile properties of CS hybrid fibers without incorporating more content or additives.

Efficient removal of endocrine disrupting compounds 17 α-ethynyl estradiol and 17 β-estradiol by Enterobacter sp. strain BHUBP7 and elucidation of the degradation pathway by HRAMS analysis

Owing to the increased population and their overuse, estrogens are being detected in the environment at alarming levels. They act as endocrine disrupting compounds (EDC's) posing adverse effects on animals and humans. In this study, a strain belonging to Enterobacter sp. strain BHUBP7 was recovered from a Sewage Treatment Plant (STP) situated in Varanasi city, U.P., India, and was capable of metabolizing both 17 α-Ethynylestradiol (EE2) and 17 β-Estradiol (E2) separately as a sole carbon source. The strain BHUBP7 exhibited high rates of E2 degradation as compared to EE2 degradation. The degradation of E2 (10 mg/L) was 94.3% after four days of incubation, whereas the degradation of EE2 (10 mg/L) under similar conditions was 98% after seven days of incubation. The kinetics of EE2 and E2 degradation fitted well with the first-order reaction rate. FTIR analysis revealed the involvement of functional groups like C = O, C-C, C-OH during the degradation process. The metabolites generated during degradation of EE2 and E2 were identified using HRAMS and a plausible pathway was elucidated. It was observed that metabolism of both E2 and EE2 proceeded with the formation of estrone, which was then hydroxylated to 4-hydroxy estrone, followed by ring opening at the C4-C5 position, and was further metabolized by the 4,5 seco pathway leading to the formation of 3-(7a-methyl-1,5-dioxooctahydro-1H-inden-4-yl) propanoic acid (HIP). It is the first report on the complete pathway of EE2 and E2 degradation in Enterobacter sp. strain BHUBP7. Moreover, the formation of Reactive Oxygen Species (ROS) during the degradation of EE2 and E2 was observed. It was concluded that both hormones elicited the generation of oxidative stress in the bacterium during the degradation process.

Copper sulfide and zinc oxide hybrid nanocomposite for wastewater decontamination of pharmaceuticals and pesticides

In this work, hybrid nanocomposites of CuS QDs @ ZnO photocatalysts are fabricated through a facile microwave-assisted (MW) hydrothermal method as a green preparation process. The prepared photocatalysts (PCs) are employed under simulated sunlight (SL) for the degradation of ciprofloxacin, ceftriaxone, ibuprofen pharmaceuticals, methylene blue dye, and 2,4,5-trichlorophenoxyacetic acid (2,4-D) pesticide. The prepared photocatalysts are characterized in detail using several compositional, optical, and morphological techniques. The influence of the CuS (QDs) wt. % on morphological, structural, as well as photocatalytic degradation efficiency have been investigated. The small displacement between the (107) plane of CuS and the (102) plane of ZnO can confirmed the existence of lattice interaction, implying the formation of p-n heterojunctions. TEM and XRD results demonstrated that the CuS QDs are established and uniformly decorated on the surface of ZnO NRs, confirming the forming of an efficient CuS QDs @ ZnO heterojunction nanostructures. The CuS QDs @ ZnO hybrid nanocomposites showed enhancement in crystallinity, light absorption, surface area, separation of e-h pair and inhibition in their recombination at an interfacial heterojunction. In addition it is found that, 3 wt% CuS QDs @ ZnO has the foremost influence. The results showed improvement of photocatalytic activity of the 3% CuS QDs @ ZnO hybrid nanocomposite as compared to the bare ZnO nanorods. The impressive photocatalytic performance of CuS @ ZnO heterostructure nanorods may be attributed to efficient charge transfer. The prepared CuS QDs @ ZnO hybrid nanocomposites exhibited 100% removal for MB dye, after 45 min, and after 60 min for ibuprofen, ciprofloxacin pharmaceuticals, and 2.4.5 trichloro phenoxy acetic acid pesticide with the catalyst amount of 0.2 g/L. Although 100% removal of ceftriaxone pharmaceutical acheived after 90 min. In addition CuS QDs @ ZnO hybrid nanocomposites exhibited complete removal of COD for ibuprofen, ceftriaxone pharmaceuticals and 2.4.5 trichloro phenoxy acetic acid pesticide after 2 h with no selectivity. Briefly, 3% CuS QDs@ZnO hybrid nanocomposites can be considered as promising photoactive materials under simulated sunlight for wastewater decontamination.

Programmable Drug Release from a Dual-Stimuli Responsive Magnetic Metal-Organic Framework

Along with the increasing incidence of cancer and drawbacks of traditional drug delivery systems (DDSs), developing novel nanocarriers for sustained targeted-drug release has become urgent. In this regard, metal-organic frameworks (MOFs) have emerged as potential candidates due to their structural flexibility, defined porosity, lower toxicity, and biodegradability. Herein, a FeMn-based ferromagnetic MOF was synthesized from a preassembled Fe₂Mn(μ₃-O) cluster. The introduction of the Mn provided the ferromagnetic character to FeMn-MIL-88B. 5-Fluoruracil (5-FU) was encapsulated as a model drug in the MOFs, and its pH and H₂S dual-stimuli responsive controlled release was realized. FeMn-MIL-88B presented a higher 5-FU loading capacity of 43.8 wt % and rapid drug release behavior in a tumor microenvironment (TME) simulated medium. The carriers can rapidly release loaded drug of 70% and 26% in PBS solution (pH = 5.4) and NaHS solution (500 μM) within 24 h. The application of mathematical release models indicated 5-FU release from carriers can be precisely fitted to the first-order, second-order, and Higuchi models of release. Moreover, the cytotoxicity profile of the carrier against human embryonic kidney cells (HEK293T) suggests no adverse effects up to 100 μg/mL. The lesser toxic effect on cell viability can be attributed to the low toxicity values [LD₅₀ (Fe) = 30 g·kg^-1, (Mn) = 1.5 g·kg^-1, and (terephthalic acid) = 5 g·kg^-1] of the MOFs structural components. Together with dual-stimuli responsiveness, ferromagnetic nature, and low toxicity, FeMn-MIL-88B MOFs can emerge as promising carriers for drug delivery applications.

Preparation of lightweight daisy-like magnetic molecularly imprinted polymers via etching synergized template immobilization for enhanced rapid detection of trace 17β-estradiol

17β-estradiol (E2), as one of the pharmaceutical and personal care product, frequently contaminates environmental water as estrogen pollutant and possesses great risk to human survival as well as the sustainable development of the ecosystem. Herein, to achieve an effective adsorbent system for the selective removal of E2 from the environmental water, Fe₃O₄ nanoparticles are subjected to chemical etching to reduce the overall mass and then employed as carriers to prepare a novel type of lightweight daisy-like magnetic molecularly imprinted polymers (LD-MMIPs) adopting template immobilization strategy. The LD-MMIPs based etched magnetic nanoparticles not only exhibit light mass but also have plentiful imprinted sites in the etched channels, which significantly increases the adsorption capacity for E2. The daisy-like LD-MMIPs own strong magnetic responsiveness, well crystallinity, fast binding kinetics, high adsorption amount, and excellent selectivity. Moreover, combining with HPLC, the LD-MMIPs as adsorbents have been successfully used to specifically recognize and detect trace E2 in environmental water. Thus, the proposed LD-MMIPs with high adsorption capacity hold great potential in monitoring water pollution. Additionally, this work also provides an alternative strategy for improving the adsorption capacity of magnetic molecularly imprinted polymers through a convenient chemical etching technology.

Photocatalytic Degradation of Tetracycline in Aqueous Solution Using Copper Sulfide Nanoparticles

In this paper, spherical-shaped pure phase djurleite (Cu31S16) and roxbyite (Cu7S4) nanoparticles were prepared by a solvothermal decomposition of copper(II) dithiocarbamate complex in dodecanthiol (DDT). The reaction temperature was used to control the phases of the samples, which were represented as Cu31S16 (120 °C), Cu31S16 (150 °C), Cu7S4 (220 °C), and Cu7S4 (250 °C) and were characterized by using X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM and TEM), and absorption spectroscopy. The samples were used as photocatalysts for the degradation of tetracycline (TC) under visible light irradiation. The results of the study showed that Cu7S4 (250 °C) exhibited the best activity in the reaction system with the TC degradation rate of up to 99% within 120 min of light exposure, while the Cu31S16 (120 °C) system was only 46.5% at the same reaction condition. In general, roxbyite Cu7S4 (250 °C) could be considered as a potential catalyst for the degradation of TC in solution.

Effective removal of arsenate from wastewater using aluminium enriched ferric oxide-hydroxide recovered from authentic acid mine drainage

This study explored an eco-friendly approach for the synthesis of novel aluminium enriched ferric oxide-hydroxide (Fe/AlO(OH)) from authentic acid mine drainage (AMD). The synthesized Fe/AlO(OH) was subsequently tested for arsenate removal capabilities. Fe/AlO(OH) was synthesized from bona fide AMD via selective precipitation, thermal activation, and vibratory ball milling. One-factor-at-a-time (OFAAT) method was used to optimize operational parameters, which include adsorbent dosage, concentration, pH, agitation time, and temperature. Optimized conditions were observed to be 150 ppm of As(V), Solid: Liquid ratio - 1 g: 250 mL, contact time of 60 min, and ambient temperature and pH. Limited temperature and pH effects on adsorption were observed. Equilibrium data fits using Langmuir-, Freundlich-, Two surface Langmuir-, Dubinin-Radushkevich-, and Dubinin-Astokov isotherm models showed highly favorable adsorption conditions, the highest known maximum adsorption capacity for As(V) of 102-129 mg g^-1, and coupled physisorption/diffusion limited adsorption. Thermodynamic analysis showed positive Gibbs free energy (ΔG°), negative enthalpy change (ΔH°), and positive entropy change (ΔS°) - likely a result of an inner sphere complexation of the As(V) with the Fe/Al surface. Considering the obtained results, valorization of AMD for the synthesis of Fe/AlO(OH) was viable and effective. This initiative could potentially minimize the footprints of AMD and arsenic pollution.