Mass spectrometry-based microbiological testing for blood stream infection

Early detection of bacterial pneumonia by characteristic induced odor signatures

INTRODUCTION

The ability to detect pathogenic bacteria before the onsets of severe respiratory symptoms and to differentiate bacterial infection allows to improve patient-tailored treatment leading to a significant reduction in illness severity, comorbidity as well as antibiotic resistance. As such, this study refines the application of the non-invasive Secondary Electrospray Ionization-High Resolution Mass Spectrometry (SESI-HRMS) methodology for real-time and early detection of human respiratory bacterial pathogens in the respiratory tract of a mouse infection model.

METHODS

A real-time analysis of changes in volatile metabolites excreted by mice undergoing a lung infection by Staphylococcus aureus or Streptococcus pneumoniae were evaluated using a SESI-HRMS instrument. The infection status was confirmed using classical CFU enumeration and tissue histology. The detected VOCs were analyzed using a pre- and post-processing algorithm along with ANOVA and RASCA statistical evaluation methods.

RESULTS

Characteristic changes in the VOCs emitted from the mice were detected as early as 4-6 h post-inoculation. Additionally, by using each mouse as its own baseline, we mimicked the inherent variation within biological organism and reported significant variations in 25 volatile organic compounds (VOCs) during the course of a lung bacterial infection.

CONCLUSION

the non-invasive SESI-HRMS enables real-time detection of infection specific VOCs. However, further refinement of this technology is necessary to improve clinical patient management, treatment, and facilitate decisions regarding antibiotic use due to early infection detection.

Comparison of organism recovery and staining properties for 3 methods of Gram stain preparation

BACKGROUND

One possible way to improve accuracy of blood culture Gram stain analyses is increasing the concentration of organisms on the slide prepared from the blood culture broth.

METHODS

From each positive blood culture bottle, 1 direct smear, a 1-drop concentrated preparation, and 1 cytospin/cytofuge preparation were Gram stained and evaluated. There were 2 evaluators who ranked the 3 preparations from most to fewest organisms seen. Each preparation was also scored as acceptable or unacceptable for both organism and background stain quality.

RESULTS

The 1-drop slide exhibited the highest concentration of organisms compared with both the cytospin and direct smear but presented frequent difficulties with interpretation of Gram staining acceptability with both the background and the organisms. Although cytospin preparations are known to concentrate liquid specimens, the current study found no enrichment of microorganisms over the direct smear preparation. The cytospin was, however, advantageous for enhancing organism morphology by creating a monolayer of elements and reducing background artifacts.

CONCLUSION

The 1-drop preparation is simple, inexpensive, and effective at increasing organism concentration for analysis, making it a good option when processing culture bottles with low organism loads, but more investigation into methods of improving stain quality is necessary.

Evolving strategies in microbe identification-a comprehensive review of biochemical, MALDI-TOF MS and molecular testing methods

Detection and identification of microorganisms are the first steps to guide susceptibility testing and enable clinicians to confirm diseases and guide therapy. The faster the pathogen identification is determined, the quicker the appropriate treatment can be started. In the clinical microbiology laboratory, multiple methodologies can be used to identify organisms, such as traditional biochemical testing or more recent methods like MALDI TOF MS and nucleic acid detection/identification assays. Each of these techniques has advantages and limitations, and clinical laboratories need to determine which methodology is best suited to their particular setting in terms of clinical needs, availability of technical expertise and cost. This article presents a concise review of the history, utilization, advantages and limitations of the main methods used for identifying microorganisms in microbiology laboratories.

Accelerated microbial identification "directly" from positive blood cultures using MALDI-TOF MS: Local clinical laboratory challenges

Rapid identification of microbial pathogens "directly" from positive blood cultures (PBCs) is critical for prompt initiation of empirical antibiotic therapy and clinical outcomes. Towards higher microbial identification rates, we modified a published initial serum separator tubes-based MALDI-TOF-MS protocol, for blood culture specimens received at a non-hospital based standalone diagnostic laboratory, Bangalore, India: (a) "Initial" protocol #1: From 28 PBCs, identification= 39% (Gram-negative= 43%: Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa; Gram-positive: 36%: Enterococcus faecalis, Staphylococcus aureus, Staphylococcus haemolyticus); mis-identification= 14%; non-identification= 47%. (b) "Modified" protocol #2: Quality controls (ATCC colonies spiked in negative blood cultures) From 7 analysis, identification= 100% (Escherichia coli, Klebsiella pneumonia, Klebsiella oxytoca, Pseudomonas aeruginosa, Enterococcus faecalis, Staphylococcus aureus); From 7 PBCs, identification= 57%; mis-identification= 14%; non-identification= 29%. Microbial preparations of highest quality and quantity for proteomic analysis and separate spectra matching reference databases for colonies and PBCs are needed for best clinical utility.

Novel Multiplexed Plasma Biomarker Panel Has Diagnostic and Prognostic Potential in Children With Hypertrophic Cardiomyopathy

BACKGROUND

Hypertrophic cardiomyopathy (HCM) is defined clinically by pathological left ventricular hypertrophy. We have previously developed a plasma proteomics biomarker panel that correlates with clinical markers of disease severity and sudden cardiac death risk in adult patients with HCM. The aim of this study was to investigate the utility of adult biomarkers and perform new discoveries in proteomics for childhood-onset HCM.

METHODS

Fifty-nine protein biomarkers were identified from an exploratory plasma proteomics screen in children with HCM and augmented into our existing multiplexed targeted liquid chromatography-tandem/mass spectrometry-based assay. The association of these biomarkers with clinical phenotypes and outcomes was prospectively tested in plasma collected from 148 children with HCM and 50 healthy controls. Machine learning techniques were used to develop novel pediatric plasma proteomic biomarker panels.

RESULTS

Four previously identified adult HCM markers (aldolase fructose-bisphosphate A, complement C3a, talin-1, and thrombospondin 1) and 3 new markers (glycogen phosphorylase B, lipoprotein a and profilin 1) were elevated in pediatric HCM. Using supervised machine learning applied to training (n=137) and validation cohorts (n=61), this 7-biomarker panel differentiated HCM from healthy controls with an area under the curve of 1.0 in the training data set (sensitivity 100% [95% CI, 95-100]; specificity 100% [95% CI, 96-100]) and 0.82 in the validation data set (sensitivity 75% [95% CI, 59-86]; specificity 88% [95% CI, 75-94]). Reduced circulating levels of 4 other peptides (apolipoprotein L1, complement 5b, immunoglobulin heavy constant epsilon, and serum amyloid A4) found in children with high sudden cardiac death risk provided complete separation from the low and intermediate risk groups and predicted mortality and adverse arrhythmic outcomes (hazard ratio, 2.04 [95% CI, 1.0-4.2]; P=0.044).

CONCLUSIONS

In children, a 7-biomarker proteomics panel can distinguish HCM from controls with high sensitivity and specificity, and another 4-biomarker panel identifies those at high risk of adverse arrhythmic outcomes, including sudden cardiac death.

An improved protocol for bacteria identification by MALDI-TOF MS directly from positive blood cultures

FASTinov® developed a rapid antimicrobial susceptibility test that includes the purification of a bacterial suspension directly from positive blood cultures (BC). In order to streamline laboratory workflow, the use of the bacterial suspension obtained through FASTinov® sample prep was tested for identification (ID) by matrix absorption laser deionization-time of flight mass spectrometry (MALDI-TOF MS) (Bruker) in 364 positive BC, and its accuracy assessed comparing with the MALDI-TOF MS ID of the next-day subcultured colonies. FASTinov sample prep was highly reliable for rapid ID directly from BC with proportion of agreement of 94.9% for Gram-positive and 96.3% for Gram-negative bacteria.

Origins, Technological Advancement, and Applications of Peptidomics

Peptidomics is the comprehensive characterization of peptides from biological sources instead of heading for a few single peptides in former peptide research. Mass spectrometry allows to detect a multitude of peptides in complex mixtures and thus enables new strategies leading to peptidomics. The term was established in the year 2001, and up to now, this new field has grown to over 3000 publications. Analytical techniques originally developed for fast and comprehensive analysis of peptides in proteomics were specifically adjusted for peptidomics. Although it is thus closely linked to proteomics, there are fundamental differences with conventional bottom-up proteomics. Fundamental technological advancements of peptidomics since have occurred in mass spectrometry and data processing, including quantification, and more slightly in separation technology. Different strategies and diverse sources of peptidomes are mentioned by numerous applications, such as discovery of neuropeptides and other bioactive peptides, including the use of biochemical assays. Furthermore, food and plant peptidomics are introduced similarly. Additionally, applications with a clinical focus are included, comprising biomarker discovery as well as immunopeptidomics. This overview extensively reviews recent methods, strategies, and applications including links to all other chapters of this book.

From bench to bedside via bytes: Multi-omic immunoprofiling and integration using machine learning and network approaches

A significant surge in research endeavors leverages the vast potential of high-throughput omic technology platforms for broad profiling of biological responses to vaccines and cutting-edge immunotherapies and stem-cell therapies under development. These profiles capture different aspects of core regulatory and functional processes at different scales of resolution from molecular and cellular to organismal. Systems approaches capture the complex and intricate interplay between these layers and scales. Here, we summarize experimental data modalities, for characterizing the genome, epigenome, transcriptome, proteome, metabolome, and antibody-ome, that enable us to generate large-scale immune profiles. We also discuss machine learning and network approaches that are commonly used to analyze and integrate these modalities, to gain insights into correlates and mechanisms of natural and vaccine-mediated immunity as well as therapy-induced immunomodulation.

Mass spectrometry-based proteomics as an emerging tool in clinical laboratories

Mass spectrometry (MS)-based proteomics have been increasingly implemented in various disciplines of laboratory medicine to identify and quantify biomolecules in a variety of biological specimens. MS-based proteomics is continuously expanding and widely applied in biomarker discovery for early detection, prognosis and markers for treatment response prediction and monitoring. Furthermore, making these advanced tests more accessible and affordable will have the greatest healthcare benefit.This review article highlights the new paradigms MS-based clinical proteomics has created in microbiology laboratories, cancer research and diagnosis of metabolic disorders. The technique is preferred over conventional methods in disease detection and therapy monitoring for its combined advantages in multiplexing capacity, remarkable analytical specificity and sensitivity and low turnaround time.Despite the achievements in the development and adoption of a number of MS-based clinical proteomics practices, more are expected to undergo transition from bench to bedside in the near future. The review provides insights from early trials and recent progresses (mainly covering literature from the NCBI database) in the application of proteomics in clinical laboratories.

From bottle to bedside: Implementation considerations and antimicrobial stewardship considerations for bloodstream infection rapid diagnostic testing

Antimicrobial stewardship (AMS) programs have been quick to adopt novel molecular rapid diagnostic technologies (mRDTs) for bloodstream infections (BSIs) to improve antimicrobial management. As such, most of the literature demonstrating the clinical and economic benefits of mRDTs for BSI is in the presence of active AMS intervention. Leveraging mRDTs to improve antimicrobial therapy for BSI is increasingly integral to AMS program activities. This narrative review discusses available and future mRDTs, the relationship between the clinical microbiology laboratory and AMS programs, and practical considerations for optimizing the use of these tools within a health system. Antimicrobial stewardship programs must work closely with their clinical microbiology laboratories to ensure that mRDTs are used to their fullest benefit while remaining cognizant of their limitations. As more mRDT instruments and panels become available and AMS programs continue to expand, future efforts must consider the expansion beyond traditional settings of large academic medical centers and how combinations of tools can further improve patient care.

MALDI-TOF MS Is an Effective Technique To Classify Specific Microbiota

MALDI-TOF MS is well-recognized for single microbial identification and widely used in research and clinical fields due to its specificity, speed of analysis, and low cost of consumables. Multiple commercial platforms have been developed and approved by the U.S. Food and Drug Administration. Matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS) has been used for microbial identification. However, microbes can present as a specific microbiota, and detection and classification remain a challenge. Here, we constructed several specific microbiotas and tried to classify them using MALDI-TOF MS. Different concentrations of nine bacterial strains (belonging to eight genera) constituted 20 specific microbiotas. Using MALDI-TOF MS, the overlap spectrum of each microbiota (MS spectra of nine bacterial strains with component percentages) could be classified by hierarchical clustering analysis (HCA). However, the real MS spectrum of a specific microbiota was different than that of the overlap spectrum of component bacteria. The MS spectra of specific microbiota showed excellent repeatability and were easier to classify by HCA, with an accuracy close to 90%. These results indicate that the widely used MALDI-TOF MS identification method for individual bacteria can be expanded to classification of microbiota. IMPORTANCE MALDI-TOF MS can be used to classify specific model microbiota. The actual MS spectrum of the model microbiota was not a simple superposition of every single bacterium in a certain proportion but had a specific spectral fingerprint. The specificity of this fingerprint can enhance the accuracy of microbiota classification.

Evaluation of a novel sample preparation method for identifying Aspergillus fumigatus using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry: Combining Yatalase and silica beads treatment

Aspergillus spp. belong to filamentous fungi and sometimes cause invasive aspergillosis which has high mortality. Filamentous fungi are generally identified morphologically. However, morphologic identification is time consuming and requires advanced skills. It is difficult to train technicians and ensure a high level of quality. Therefore, an identification technique that is both accurate and relatively easy to learn is needed. In the present study, we focused on the effects of Yatalase and silica beads, which enable the efficient extraction of proteins via cell wall disruption of Aspergillus spp., and aimed to establish a novel sample preparation method using Yatalase and silica beads to enhance the efficiency of Aspergillus spp. identification with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The sample preparation method using the combination of Yatalase and silica beads showed higher accuracy for the identification of Aspergillus spp. compared with Yatalase or silica beads alone. The Yatalase/silica beads method also resulted in significantly higher identification scores compared with the conventional method for the identification of Aspergillus fumigatus (n = 33). These findings indicate that our novel Yatalase/silica beads method provides more reliable identification of A. fumigatus than does the conventional method.

MALDI-TOF MS-Based Approaches for Direct Identification of Gram-Negative Bacteria and BlaKPC-Carrying Plasmid Detection from Blood Cultures: A Three-Year Single-Centre Study and Proposal of a Diagnostic Algorithm

The rapid identification of pathogens of bloodstream infections (BSIs) and the detection of antibiotic resistance markers are critically important for optimizing antibiotic therapy and infection control. The purpose of this study was to evaluate two approaches based on MALDI-TOF MS technology for direct identification of Gram-negative bacteria and automatic detection of Klebsiella pneumoniae carbapenemase (KPC) producers using the Bruker MBT Subtyping IVD Module in a large routine laboratory over a three-year period. MALDI-TOF MS analysis was performed directly from blood culture (BC) bottles following bacterial pellet recovery by Rapid MBT Sepsityper® Kit and on blood agar 4-h subcultures. Automated detection of blaKPC-carrying pKpQIL-plasmid by Bruker MBT Subtyping Module was evaluated in BCs tested positive to K. pneumoniae or E. coli. The results were compared with those obtained with conventional reference methods. Among the 2858 (93.4%) monomicrobial BCs, the overall species identification rates of the Rapid Sepsityper and the short-term subculture protocols were 84.5% (n = 2416) and 90.8% (n = 2595), respectively (p < 0.01). Excellent specificity for KPC-producers identification were observed for both MALDI-TOF MS protocols. The pKpQIL plasmid-related peak was detected in overall 91 of the 120 (75.8%) KPC-producing isolates. Notably, 14 out of the 17 (82.3%) K. pneumoniae isolates carrying blaKPC variants associated with ceftazidime/avibactam resistance and tested negative by the immunocromatography assay, were correctly identified as KPC-producers by MALDI-TOF MS. In conclusion, combination of both Rapid Sepsityper and short-term subculture protocols may represent an optimal solution to promptly identify more than 95% of Gram-negative bacteria causing BSIs. MALDI Biotyper® platform enabled a reliable and robust automated detection of KPC producers in parallel with species identification. However, integration of molecular or immunocromatographic assays are recommended according to local epidemiology.

Petri-plate, bacteria, and laser optical scattering sensor

Classical microbiology has paved the path forward for the development of modern biotechnology and microbial biosensing platforms. Microbial culturing and isolation using the Petri plate revolutionized the field of microbiology. In 1887, Julius Richard Petri invented possibly the most important tool in microbiology, the Petri plate, which continues to have a profound impact not only on reliably isolating, identifying, and studying microorganisms but also manipulating a microbe to study gene expression, virulence properties, antibiotic resistance, and production of drugs, enzymes, and foods. Before the recent advances in gene sequencing, microbial identification for diagnosis relied upon the hierarchal testing of a pure culture isolate. Direct detection and identification of isolated bacterial colonies on a Petri plate with a sensing device has the potential for revolutionizing further development in microbiology including gene sequencing, pathogenicity study, antibiotic susceptibility testing , and for characterizing industrially beneficial traits. An optical scattering sensor designated BARDOT (bacterial rapid detection using optical scattering technology) that uses a red-diode laser, developed at the beginning of the 21^st century at Purdue University, some 220 years after the Petri-plate discovery can identify and study bacteria directly on the plate as a diagnostic tool akin to Raman scattering and hyperspectral imaging systems for application in clinical and food microbiology laboratories.

Rapid bacterial identification by MALDI-TOF MS directly from blood cultures and rapid susceptibility testing: A simple approach to reduce the turnaround time of blood cultures

Antimicrobial treatment of patients with bloodstream infections (BSI) is time-sensitive. In an era of increasing antimicrobial resistance, rapid detection and identification of bacteria with antimicrobial susceptibility are critical for targeted therapy early in the disease course. This study describes the performance of a rapid method for identifying and testing antimicrobial susceptibility of Gram-negative bacteria performed directly from blood culture bottles in a routine microbiology laboratory. A total of 284, 120, and 24 samples were analyzed by rapid identification (Rid), rapid susceptibility testing (RAST), and rapid broth microdilution for polymyxin B (rMIC), respectively, and compared with standard methods. Our protocol was able to identify 93% of isolates at the species level using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). We obtained 100% agreement for RAST compared to the standard method and 96% agreement for rMIC. Our protocol has proven to be an excellent tool for rapid identification of Gram-negative bacilli causing BSIs. It can also be used in microbiology laboratory routine along with RAST and faster polymyxin microdilution, especially for carbapenemase-producing bacteria, allowing for rapid, simple, accurate, and cost-effective diagnosis.

The potential of 4D's approach in curbing antimicrobial resistance among bacterial pathogens

INTRODUCTION

Antibiotics are life-saving drugs but irrational/inappropriate use leads to the emergence of antibiotic-resistant bacterial superbugs, making their treatment extremely challenging. Increasing antimicrobial resistance (AMR) among bacterial pathogens is becoming a serious public health concern globally. If ignorance persists, there would not be any antibiotics available to treat even a common bacterial infection in future.

AREA COVERED

This article intends to collate and discuss the potential of 4D's (right Drug, Dose, Duration, and De-escalation of therapy) approach to tackle the emerging problem of AMR. For this, we searched PubMed, Google Scholar, Medline, and clinicaltrials.gov databases primarily using keywords 'optimal antibiotic therapy,' 'antimicrobial resistance,' 'higher versus lower dose antibiotic treatment,' 'shorter versus longer duration antibiotic treatment,' 'de-escalation study', and 'antimicrobial stewardship measures' and based on the findings, form and expressed our opinion.

EXPERT OPINION

More efforts are needed for developing diagnostics for rapid, accurate, point-of-care, and cost-effective pathogen identification and antimicrobial susceptibility testing (AST) to facilitate rational use of antibiotics. Current dosing and duration of therapies also need to be redefined to maximize their impact. Furthermore, de-escalation approaches should be developed and encouraged in the clinic. This altogether will minimize selection pressure on the pathogens and reduce emergence of AMR.

Rapid detection of Staphylococcus aureus and Streptococcus pneumoniae by real-time analysis of volatile metabolites

Early detection of pathogenic bacteria is needed for rapid diagnostics allowing adequate and timely treatment of infections. In this study, we show that secondary electrospray ionization–high resolution mass spectrometry (SESI-HRMS) can be used as a diagnostic tool for rapid detection of bacterial infections as a supportive system for current state-of-the-art diagnostics. Volatile organic compounds (VOCs) produced by growing S. aureus or S. pneumoniae cultures on blood agar plates were detected within minutes and allowed for the distinction of these two bacteria on a species and even strain level within hours. Furthermore, we obtained a fingerprint of clinical patient samples within minutes of measurement and predominantly observed a separation of samples containing live bacteria compared to samples with no bacterial growth. Further development of this technique may reduce the time required for microbiological diagnosis and should help to improve patient’s tailored treatment.

•

Real-time mass spectrometry shows potential as a tool for microbiological diagnosis

•

Bacterial volatile metabolites from 1 × 10³ CFUs are detected within minutes

•

S. aureus and S. pneumoniae can be distinguished on species and even strain level

•

Complex clinical samples cluster according to presence or absence of viable bacteria

The application of mass spectrometry method for the study and identification of medically important viruses (review of literature)

It is difficult to overestimate the urgency of the problem of well-timed diagnosis of viral infections. According to the WHO, dozens of outbreaks of viral diseases are recorded annually, both in developing and developed countries. Moreover, the seasonal flu virus alone is capable of infecting up to 20% of the population, even in European countries with a high level of medicine. And the annual number of deaths due to viral infections, according to official statistics, exceeds 600 thousand people around the world. That's why the provision of a reliable and fairly rapid diagnosis of viruses, along with subsequent therapy, makes a significant contribution to reducing the incidence of mortality. Despite the fact that PCR-based methods currently remain the most common method for identifying viruses in clinical practice, as recent experience shows, in addition to the already known disadvantages, in the event of large outbreaks, such test systems may simply not be in the required amount. In this regard, it is necessary to supplement and improve the existing tools for identification and research of clinically significant viruses. The MALDI-TOF mass spectrometry method combines a degree of accuracy and versatility, sufficient both for the identification of clinical strains isolated from patients, and for the study of the phenotypic properties of viruses in research laboratories and centers. This article presents and summarizes the main data on the existing or potential application of the method of time-of-flight mass spectrometry with matrix-associated laser desorption / ionization for the identification or study of viruses.

Characterization of symbiotic and nitrogen fixing bacteria

Symbiotic nitrogen fixing bacteria comprise of diverse species associated with the root nodules of leguminous plants. Using an appropriate taxonomic method to confirm the identity of superior and elite strains to fix nitrogen in legume crops can improve sustainable global food and nutrition security. The current review describes taxonomic methods preferred and commonly used to characterize symbiotic bacteria in the rhizosphere. Peer reviewed, published and unpublished articles on techniques used for detection, classification and identification of symbiotic bacteria were evaluated by exploring their advantages and limitations. The findings showed that phenotypic and cultural techniques are still affordable and remain the primary basis of species classification despite their challenges. Development of new, robust and informative taxonomic techniques has really improved characterization and identification of symbiotic bacteria and discovery of novel and new species that are effective in biological nitrogen fixation (BNF) in diverse conditions and environments.

Metabolomics Research in Periodontal Disease by Mass Spectrometry

Periodontology is a newer field relative to other areas of dentistry. Remarkable progress has been made in recent years in periodontology in terms of both research and clinical applications, with researchers worldwide now focusing on periodontology. With recent advances in mass spectrometry technology, metabolomics research is now widely conducted in various research fields. Metabolomics, which is also termed metabolomic analysis, is a technology that enables the comprehensive analysis of small-molecule metabolites in living organisms. With the development of metabolite analysis, methods using gas chromatography–mass spectrometry, liquid chromatography–mass spectrometry, capillary electrophoresis–mass spectrometry, etc. have progressed, making it possible to analyze a wider range of metabolites and to detect metabolites at lower concentrations. Metabolomics is widely used for research in the food, plant, microbial, and medical fields. This paper provides an introduction to metabolomic analysis and a review of the increasing applications of metabolomic analysis in periodontal disease research using mass spectrometry technology.

Applications of Tandem Mass Spectrometry (MS/MS) in Protein Analysis for Biomedical Research

Mass Spectrometry (MS) allows the analysis of proteins and peptides through a variety of methods, such as Electrospray Ionization-Mass Spectrometry (ESI-MS) or Matrix-Assisted Laser Desorption Ionization-Mass Spectrometry (MALDI-MS). These methods allow identification of the mass of a protein or a peptide as intact molecules or the identification of a protein through peptide-mass fingerprinting generated upon enzymatic digestion. Tandem mass spectrometry (MS/MS) allows the fragmentation of proteins and peptides to determine the amino acid sequence of proteins (top-down and middle-down proteomics) and peptides (bottom-up proteomics). Furthermore, tandem mass spectrometry also allows the identification of post-translational modifications (PTMs) of proteins and peptides. Here, we discuss the application of MS/MS in biomedical research, indicating specific examples for the identification of proteins or peptides and their PTMs as relevant biomarkers for diagnostic and therapy.

MALDI-TOF MS method for differentiation of methicillin-sensitive and methicillin-resistant Staphylococcus aureus using (E)-Propyl α-cyano-4-Hydroxyl cinnamylate

Differentiating methicillin-sensitive and methicillin-resistant Staphylococcus aureus (MRSA and MSSA) is crucial for clinical diagnosis and anti-microbial treatment. Matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) is an efficient tool for identifying pathogenic microorganisms at the bacterial species level. Here, we found that MRSA and MSSA can be differentiated by MALDI-TOF MS by employing (E)-propylα-cyano-4-hydroxyl cinnamylate (CHCA-C3) as the matrix, which shows great performance for proteins/peptides, especially hydrophobic proteins. The results show that the mass spectra profile of standard MRSA (ATCC 43300) is significantly different from the profiles of standard MSSA strains (ATCC 25923 and 29213) when using CHCA-C3 as the matrix compared to traditional matrix. The mass profiles had great reproducibility and were scarcely influenced by the growth medium. Due to the enhanced discrimination ability of CHCA-C3, we collected the mass spectra of 62 clinical S. aureus strains and selected four representative peaks for principal component analysis, which showed great differentiation. Our results suggest that employing a suitable matrix could enhance the discrimination ability of antibiotic-resistant bacteria by MALDI-TOF MS.

MALDI-Based Mass Spectrometry in Clinical Testing: Focus on Bacterial Identification

The term “proteome” refers to the total of all proteins expressed in an organism. The term “proteomics” refers to the field of research that includes not only information on the expression levels of individual proteins, but also their higher-order structures, intermolecular interactions, and post-translational modifications. The core technology, matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), is available for protein analysis thanks to the work of Koichi Tanaka and John Fenn, who were awarded the Nobel Prize in Chemistry in 2002. The most successful proteome analysis in clinical practice is rapid microbial identification. This method determines the bacterial species by comparing the proteome profile of the bacteria obtained by matrix-assisted laser desorption ionization-time of flight MS (MALDI-TOF MS) with a database. MS is superior in simplicity, speed, and accuracy to classic speciation by staining and phenotyping. In clinical microbiology, MS has had a large impact on the diagnosis and treatment of infectious disease. Early diagnosis and treatment of infectious disease are important, and rapid identification by MALDI-TOF MS has made a major contribution to this field.

Micro- and nanosensors for detecting blood pathogens and biomarkers at different points of sepsis care

Severe infections can cause a dysregulated response leading to organ dysfunction known as sepsis. Sepsis can be lethal if not identified and treated right away. This requires measuring biomarkers and pathogens rapidly at the different points where sepsis care is provided. Current commercial approaches for sepsis diagnosis are not fast, sensitive, and/or specific enough for meeting this medical challenge. In this article, we review recent advances in the development of diagnostic tools for sepsis management based on micro- and nanostructured materials. We start with a brief introduction to the most popular biomarkers for sepsis diagnosis (lactate, procalcitonin, cytokines, C-reactive protein, and other emerging protein and non-protein biomarkers including miRNAs and cell-based assays) and methods for detecting bacteremia. We then highlight the role of nano- and microstructured materials in developing biosensors for detecting them taking into consideration the particular needs of every point of sepsis care (e.g., ultrafast detection of multiple protein biomarkers for diagnosing in triage, emergency room, ward, and intensive care unit; quantitative detection to de-escalate treatment; ultrasensitive and culture-independent detection of blood pathogens for personalized antimicrobial therapies; robust, portable, and web-connected biomarker tests outside the hospital). We conclude with an overview of the most utilized nano- and microstructured materials used thus far for solving issues related to sepsis diagnosis and point to new challenges for future development.

Direct microorganism species identification and antimicrobial susceptibility tests from positive blood culture bottles using rapid Sepsityper Kit

INTRODUCTION

We evaluated the performance of Rapid Sepsityper Kit in species identification (ID) and antimicrobial susceptibility testing (AST).

METHODS

Positive blood culture bottles (n = 227) containing single microorganisms were enrolled. We compared the direct method using Rapid Sepsityper Kit for ID and AST with the conventional method. The analyses of ID and AST were performed using MALDI Biotyper and BD Phoenix platform, respectively.

RESULTS

The direct ID method correctly identified 89.4% (203/227) of samples, and Gram-negative bacilli (95.2%) had a higher ID rate than Gram-positive cocci (84.4%). Five cases were misidentified, and non-acceptable identification was high among Streptococcus species. Direct AST results were obtained from 168 isolates. Non-acceptable ID occurred among 24 isolates; 4 Streptococcus species, and 31 isolates, which did not grow in the direct AST method, were excluded. A total of 1714 antibiotic susceptibility tests (625 from 69 Gram-positive cocci and 1089 from 99 Gram-negative bacilli) were performed. The direct AST methods showed 98.3% (1685/1714) of categorical agreement (CA), 0.7% (12/1714) of very major errors, 0.2% (4/1714) of major errors, and 0.8% (13/1714) of minor errors. Complete CA was obtained for methicillin-resistant Staphylococcus aureus and extended-spectrum beta-lactamase-producing Escherichia coli.

CONCLUSIONS

The direct ID method using Rapid Sepsityper Kit and the direct AST method in combination with the BD Phoenix platform, which was associated with a reduction of turnaround time, may be a reliable approach for blood culture bottles. However, additional validation and further improvements, especially for Gram-positive cocci, would have an impact on microbiological diagnoses.

Performance and Impact on Initial Antibiotic Choice of Direct Identification of Pathogens from Pediatric Blood Culture Bottles Using an In-House MALDI-TOF MS Protocol

The performance and early therapeutic impact of direct identification by matrix-assisted laser desorption ionization–time-of-flight mass spectrometry (MALDI-TOF; DIMT) on pediatric blood culture bottles using in-house-developed methods to obtain microbial pellets for spectrometric analysis have seldom been studied. During a 2-year period (June 2018 to May 2020), DIMT was performed on broths from positive pediatric blood culture bottles using an in-house-developed method. Organism identifications with a score of ≥1.6 were notified to treating clinicians. Therapeutic modifications that occurred after the communication of DIMT were reviewed through the electronic medical records. DIMT was performed on 530 pediatric positive blood culture bottles. Among 505 monomicrobial bottles, identifications from 298 (97.7%) deemed as bloodstream infections (BSI) and 189 (94.5%) as contaminations had DIMT notified to clinicians. All identifications were correct except for one Streptococcus mitis incorrectly reported as Streptococcus pneumoniae. Therapy modifications resulting from DIMT occurred in 27 (8.3%) patients with BSI. Deescalation from effective or ineffective broad-spectrum regimens occurred mainly in Enterococcus faecalis bacteremia, whereas appropriate escalation from an ineffective regimen with narrower spectrum occurred mainly in bacteremia caused by AmpC-β-lactamase-producing Enterobacterales. Escalation therapy was instituted significantly faster than deescalation therapy (median time, 0.75 versus 10.5 h [P = 0.01]). DIMT also enabled clinicians to confirm contamination in nearly one-half of patients with contaminated blood cultures. Our DIMT method applied to positive pediatric blood culture bottles demonstrated reliable performance for the rapid identification of pathogens. Our DIMT approach allowed therapeutic optimization in BSI, especially involving microorganisms with intrinsic antibiotic resistance, and was helpful in the early identification of likely contaminants.

IMPORTANCE We demonstrate the performance and early impact on the antimicrobial management of bloodstream infections of an inexpensive, in-house preparation method for direct identification of bloodstream pathogens in pediatric blood culture bottles by matrix-assisted laser desorption/ionization–time-of-flight mass spectrometry.

Electrochemical and spectroelectrochemical characterization of bacteria and bacterial systems

Microbes, such as bacteria, can be described, at one level, as small, self-sustaining chemical factories. Based on the species, strain, and even the environment, bacteria can be useful, neutral or pathogenic to human life, so it is increasingly important that we be able to characterize them at the molecular level with chemical specificity and spatial and temporal resolution in order to understand their behavior. Bacterial metabolism involves a large number of internal and external electron transfer processes, so it is logical that electrochemical techniques have been employed to investigate these bacterial metabolites. In this mini-review, we focus on electrochemical and spectroelectrochemical methods that have been developed and used specifically to chemically characterize bacteria and their behavior. First, we discuss the latest mechanistic insights and current understanding of microbial electron transfer, including both direct and mediated electron transfer. Second, we summarize progress on approaches to spatiotemporal characterization of secreted factors, including both metabolites and signaling molecules, which can be used to discern how natural or external factors can alter metabolic states of bacterial cells and change either their individual or collective behavior. Finally, we address in situ methods of single-cell characterization, which can uncover how heterogeneity in cell behavior is reflected in the behavior and properties of collections of bacteria, e.g. bacterial communities. Recent advances in (spectro)electrochemical characterization of bacteria have yielded important new insights both at the ensemble and the single-entity levels, which are furthering our understanding of bacterial behavior. These insights, in turn, promise to benefit applications ranging from biosensors to the use of bacteria in bacteria-based bioenergy generation and storage.

Ultra-fast direct method for identifying microorganisms from BACTEC lytic/10 anaerobic/F flasks

Background: Fast diagnosis of bloodstream infections remains the most important challenge for clinical microbiologists. The introduction of the mass-spectrometry represents a breakthrough, although several methods are already commonly used for the direct identification from positive blood cultures we present a faster method (ultra fast) for Lytic anaerobic flasks. Methods: We compare the ultra-fast (UF) method with the extensively employed differential centrifugation method (DC) and both to routine identification after 18-24 h of incubation. UF and DC method correlation rates to the gold standard were calculated, and statistical significance was proved with the Z test. Results: UF performed better overall than DC, with this difference being statistically significant. This tendency was observed in every subanalysis.

Metabolomics in the Diagnosis and Prognosis of COVID-19

Coronavirus disease 2019 (COVID-19) pandemic triggered an unprecedented global effort in developing rapid and inexpensive diagnostic and prognostic tools. Since the genome of SARS-CoV-2 was uncovered, detection of viral RNA by RT-qPCR has played the most significant role in preventing the spread of the virus through early detection and tracing of suspected COVID-19 cases and through screening of at-risk population. However, a large number of alternative test methods based on SARS-CoV-2 RNA or proteins or host factors associated with SARS-CoV-2 infection have been developed and evaluated. The application of metabolomics in infectious disease diagnostics is an evolving area of science that was boosted by the urgency of COVID-19 pandemic. Metabolomics approaches that rely on the analysis of volatile organic compounds exhaled by COVID-19 patients hold promise for applications in a large-scale screening of population in point-of-care (POC) setting. On the other hand, successful application of mass-spectrometry to detect specific spectral signatures associated with COVID-19 in nasopharyngeal swab specimens may significantly save the cost and turnaround time of COVID-19 testing in the diagnostic microbiology and virology laboratories. Active research is also ongoing on the discovery of potential metabolomics-based prognostic markers for the disease that can be applied to serum or plasma specimens. Several metabolic pathways related to amino acid, lipid and energy metabolism were found to be affected by severe disease with COVID-19. In particular, tryptophan metabolism via the kynurenine pathway were persistently dysregulated in several independent studies, suggesting the roles of several metabolites of this pathway such as tryptophan, kynurenine and 3-hydroxykynurenine as potential prognostic markers of the disease. However, standardization of the test methods and large-scale clinical validation are necessary before these tests can be applied in a clinical setting. With rapidly expanding data on the metabolic profiles of COVID-19 patients with varying degrees of severity, it is likely that metabolomics will play an important role in near future in predicting the outcome of the disease with a greater degree of certainty.

Application and Perspectives of MALDI-TOF Mass Spectrometry in Clinical Microbiology Laboratories

Early diagnosis of severe infections requires of a rapid and reliable diagnosis to initiate appropriate treatment, while avoiding unnecessary antimicrobial use and reducing associated morbidities and healthcare costs. It is a fact that conventional methods usually require more than 24–48 h to culture and profile bacterial species. Mass spectrometry (MS) is an analytical technique that has emerged as a powerful tool in clinical microbiology for identifying peptides and proteins, which makes it a promising tool for microbial identification. Matrix assisted laser desorption ionization–time of flight MS (MALDI–TOF MS) offers a cost- and time-effective alternative to conventional methods, such as bacterial culture and even 16S rRNA gene sequencing, for identifying viruses, bacteria and fungi and detecting virulence factors and mechanisms of resistance. This review provides an overview of the potential applications and perspectives of MS in clinical microbiology laboratories and proposes its use as a first-line method for microbial identification and diagnosis.

Matrix-Assisted Laser Desorption/Ionization Time of Flight Mass Spectrometry (MALDI-TOF MS) Analysis for the Identification of Pathogenic Microorganisms: A Review

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been used in the field of clinical microbiology since 2010. Compared with the traditional technique of biochemical identification, MALDI-TOF MS has many advantages, including convenience, speed, accuracy, and low cost. The accuracy and speed of identification using MALDI-TOF MS have been increasing with the development of sample preparation, database enrichment, and algorithm optimization. MALDI-TOF MS has shown promising results in identifying cultured colonies and rapidly detecting samples. MALDI-TOF MS has critical research applications for the rapid detection of highly virulent and drug-resistant pathogens. Here we present a scientific review that evaluates the performance of MALDI-TOF MS in identifying clinical pathogenic microorganisms. MALDI-TOF MS is a promising tool in identifying clinical microorganisms, although some aspects still require improvement.

Rapid diagnostic testing for antimicrobial stewardship: Utility in Asia Pacific

Rapid diagnostic testing (RDT) can provide prompt, accurate identification of infectious organisms and be a key component of antimicrobial stewardship (AMS) programs. However, their use is less widespread in Asia Pacific than western countries. Cost can be prohibitive, particularly in less resource-replete settings. A selective approach is required, possibly focusing on the initiation of antimicrobials, for differentiating bacterial versus viral infections and identifying locally relevant tropical diseases. Across Asia Pacific, more data are needed on RDT use within AMS, focusing on the impact on antimicrobial usage, patient morbidity and mortality, and cost effectiveness. Moreover, in the absence of formal guidelines, regional consensus statements to guide clinical practice are warranted. These will provide a regionally relevant definition for RDT; greater consensus on its role in managing infections; advice on implementation and overcoming barriers; and guidance on optimizing human resource capacity. By addressing these issues, the outcomes of AMS programs should improve.

MALDI-TOF MS in a Medical Mycology Laboratory: On Stage and Backstage

The implementation of MALDI-TOF MS in medical microbiology laboratories has revolutionized practices and significantly reduced turnaround times of identification processes. However, although bacteriology quickly benefited from the contributions of this technique, adjustments were necessary to accommodate the specific characteristics of fungi. MALDI-TOF MS is now an indispensable tool in clinical mycology laboratories, both for the identification of yeasts and filamentous fungi, and other innovative uses are gradually emerging. Based on the practical experience of our medical mycology laboratory, this review will present the current uses of MALDI-TOF MS and the adaptations we implemented, to allow their practical execution in a daily routine. We will also introduce some less mainstream applications, like those for fungemia, or even still under development, as is the case for the determination of sensitivity to antifungal agents or typing methods.

Novel electronic biosensor for automated inoculum preparation to accelerate antimicrobial susceptibility testing

A key predictor of morbidity and mortality for patients with a bloodstream infection is time to appropriate antimicrobial therapy. Accelerating antimicrobial susceptibility testing from positive blood cultures is therefore key to improving patient outcomes, yet traditional laboratory approaches can require 2–4 days for actionable results. The eQUANT—a novel instrument utilizing electrical biosensors—produces a standardized inoculum equivalent to a 0.5 McFarland directly from positive blood cultures. This proof-of-concept study demonstrates that eQUANT inocula prepared from clinically significant species of Enterobacterales were comparable to 0.5 McF inocula generated from bacterial colonies in both CFU/ml concentration and performance in antimicrobial susceptibility testing, with ≥ 95% essential and categorical agreement for VITEK2 and disk diffusion. The eQUANT, combined with a rapid, direct from positive blood culture identification technique, can allow the clinical laboratory to begin antimicrobial susceptibility testing using a standardized inoculum approximately 2–3 h after a blood culture flags positive. This has the potential to improve clinical practice by accelerating conventional antimicrobial susceptibility testing and the resulting targeted antibiotic therapy.

Application of MALDI-TOF MS Profiling Coupled With Functionalized Magnetic Enrichment for Rapid Identification of Pathogens in a Patient With Open Fracture

Posttraumatic infections can occur in orthopedic trauma patients, especially in open fractures. Rapid and accurate identification of pathogens in orthopedic trauma is important for clinical diagnosis and antimicrobial treatment. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been successfully used for first-line identification of pathogens grown on culture plates. However, for direct analysis of liquid clinical specimens, pre-purification of the sample is necessary. Herein, we investigated the feasibility of coupling Fc-MBL@Fe₃O₄ enrichment with MALDI-TOF MS profiling in the identification of pathogens in liquid-cultured samples. This method is successfully used for the identification of pathogens in a patient with an open-leg fracture obtained at sea. Pathogens were enriched by Fc-MBL@Fe₃O₄ from briefly pre-cultured liquid media and identified by MALDI-TOF MS. We identified an opportunistic pathogen, Vibrio alginolyticus, which is uncommon in clinical orthopedic trauma infection but exists widely in the sea. Therefore, combining Fc-MBL@Fe₃O₄ enrichment and MALDI-TOF MS profiling has great potential for direct identification of microbes in clinical samples.

Usefulness of the MALDI-TOF MS technology with membrane filter protocol for the rapid identification of microorganisms in perioperative drainage fluids of hepatobiliary pancreatic surgery

Surgical site infections (SSIs) are significant and frequent perioperative complications, occurring due to the contamination of the surgical site. The late detection of SSIs, especially organ/space SSIs which are the more difficult to treat, often leads to severe complications. An effective method that can identify bacteria with a high accuracy, leading to the early detection of organ/space SSIs, is needed. Ninety-eight drainage fluid samples obtained from 22 patients with hepatobiliary pancreatic disease were analyzed to identify microorganisms using matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) with a new membrane filtration protocol and rapid BACpro® pretreatment compared to sole rapid BACpro® pretreatment. The levels of detail of rapid BACpro® pretreatment with or without filtration were also evaluated for the accuracy of bacterial identification. We found that reliable scores for E. coli and E. faecalis were obtained by inoculation with 1.0 × 104 CFU/ml after preparation of the membrane filter with rapid BACpro®, indicating approximately 10-folds more sensitive compared to sole rapid BACpro® pretreatment in drainage fluid specimens. Among 60 bacterial positive colonies in drainage fluid specimens, the MALDI-TOF MS and the membrane filtration with rapid BACpro® identified 53 isolates (88.3%) with a significantly higher accuracy, compared to 25 isolates in the rapid BACpro® pretreatment group (41.7%) (p < 0.001). Among the 78 strains, 14 enteric Gram-negative bacteria (93.0%) and 55 Gram-positive cocci (87.3%) were correctly identified by the membrane filtration with rapid BACpro® with a high reliability. This novel protocol could identify bacterial species within 30 min, at $2-$3 per sample, thus leading to cost and time savings. MALDI-TOF MS with membrane filter and rapid BACpro® is a quick and reliable method for bacterial identification in drainage fluids. The shortened analysis time will enable earlier selection of suitable antibiotics for treatment of organ/space SSIs to improve patients' outcomes.

Matrix-Assisted Laser Desorption Ionization Time-of-Flight Mass Spectrometry for Identification of Microorganisms in Clinical Urine Specimens after Two Pretreatments

Rapid identification of microorganisms in urine is essential for patients with urinary tract infections (UTIs). Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been proposed as a method for the direct identification of urinary pathogens. Our purpose was to compare centrifugation-based MALDI-TOF MS and short-term culture combined with MALDI-TOF MS for the direct identification of pathogens in urine specimens. We collected 965 urine specimens from patients with suspected UTIs, 211/965 isolates were identified as positive by conventional urine culture. Compared with the conventional method, the results of centrifugation-based MALDI-TOF MS were consistent in 159/211 cases (75.4%), of which 135/159 (84.9%) had scores ≥ 2.00; 182/211 cases (86.3%) were detected using short-term culture combined with MALDI-TOF MS, of which 153/182 (84.1%) had scores ≥ 2.00. There were no apparent differences among the three methods (p = 0.135). MALDI-TOF MS appears to accelerate the microbial identification speed in urine and saves at least 24 to 48 hours compared with the routine urine culture. Centrifugation-based MALDI-TOF MS is characterized by faster identification speed; however, it is substantially affected by the number of bacterial colonies. In contrast, short-term culture combined with MALDI-TOF MS has a higher detection rate but a relatively slow identification speed. Combining these characteristics, the two methods may be effective and reliable alternatives to traditional urine culture.

In-house protocol and performance of MALDI-TOF MS in the early diagnosis of bloodstream infections in a fourth-level hospital in Colombia: Jumping to full use of this technology

BACKGROUND

Bloodstream infections (BSIs) are a major cause of mortality in hospitalized patients. Rapid diagnosis is crucial because any delay in the antimicrobial treatment is associated with an increase in adverse patient outcomes. The application of matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) technology directly to blood cultures permits earlier identification of BSIs and facilitates treatment management.

METHODS

A total of 470 positive blood cultures from patient samples were analyzed using Standard Aerobic/F and Anaerobic/F blood culture media. Isolates were identified using conventional identification methods and by the direct method using the MALDI-TOF MS system.

RESULTS

In 470 blood cultures, the direct method showed good identification results (420/470, 89%); specifically, accurate species and genus identification in 283/470 (60%), and only correct genus identification in 137/470 (29%). The direct protocol had better performance for Gram-negative compared to Gram-positive bacteria (97% vs 76%) and was unable to identify the positive blood cultures for both yeasts and some bacteria, mostly Gram-positive (50/470).

CONCLUSIONS

The protocol used here gave good and reliable results, being available up to 24 h earlier, while also leading to better use of MALDI-TOF.

Rapid detection of antimicrobial resistance markers with Allplex™ Entero-DR assay directly from positive blood culture bottles

A method for rapid detection of one extended-spectrum β-lactamase (ESBL) and five carbapenemase-encoding genes as well as vancomycin resistance markers directly from blood cultures using the Allplex™ Entero-DR assay (Seegene, Seoul, South Korea) is presented. Altogether 28 previously well-characterized resistant Gram-negative bacilli and Enterococcus spp., and 142 clinical blood cultures containing Gram-negative bacilli or Gram-positive cocci were analyzed. The method had 100% sensitivity and specificity for detecting bla_OXA-48-like, bla_KPC, bla_VIM, bla_IMP, bla_NDM, bla_CTX-M, vanA, and vanB. The lowest detectable amount of viable cells in blood culture samples were 5.39·10⁴ CFU/mL, 6.66·10⁴ CFU/mL, 5.13·10³ CFU/mL, 6.09·10⁴ CFU/mL, 6.66·10⁴ CFU/mL, 6.66·10⁴ CFU/mL, 3.12·10⁴ CFU/mL, and 5.34·10⁴ CFU/mL for the bla_KPC, bla_OXA-48-like, bla_VIM, bla_IMP, bla_NDM, bla_CTX-M, vanA, and vanB, respectively. The results were available within 90 min from signal positive blood cultures, as no separate DNA extraction steps were needed, and the assay showed no interference from blood or culture media used allowing reliable and simplified detection of the resistance markers.

Current Status of Matrix-Assisted Laser Desorption/Ionization-Time-of-Flight Mass Spectrometry (MALDI-TOF MS) in Clinical Diagnostic Microbiology

Mass spectrometry (MS), a core technology for proteomics and metabolomics, is currently being developed for clinical applications. The identification of microorganisms in clinical samples using matrix-assisted laser desorption/ionization–time-of-flight mass spectrometry (MALDI-TOF MS) is a representative MS-based proteomics application that is relevant to daily clinical practice. This technology has the advantages of convenience, speed, and accuracy when compared with conventional biochemical methods. MALDI-TOF MS can shorten the time used for microbial identification by about 1 day in routine workflows. Sample preparation from microbial colonies has been improved, increasing the accuracy and speed of identification. MALDI-TOF MS is also used for testing blood, cerebrospinal fluid, and urine, because it can directly identify the microorganisms in these liquid samples without prior culture or subculture. Thus, MALDI-TOF MS has the potential to improve patient prognosis and decrease the length of hospitalization and is therefore currently considered an essential tool in clinical microbiology. Furthermore, MALDI-TOF MS is currently being combined with other technologies, such as flow cytometry, to expand the scope of clinical applications.