Gene stacking in plant cell using recombinases for gene integration and nucleases for marker gene deletion

Overcoming roadblocks for in vitro nurseries in plants: induction of meiosis

Efforts to increase genetic gains in breeding programs of flowering plants depend on making genetic crosses. Time to flowering, which can take months to decades depending on the species, can be a limiting factor in such breeding programs. It has been proposed that the rate of genetic gain can be increased by reducing the time between generations by circumventing flowering through the in vitro induction of meiosis. In this review, we assess technologies and approaches that may offer a path towards meiosis induction, the largest current bottleneck for in vitro plant breeding. Studies in non-plant, eukaryotic organisms indicate that the in vitro switch from mitotic cell division to meiosis is inefficient and occurs at very low rates. Yet, this has been achieved with mammalian cells by the manipulation of a limited number of genes. Therefore, to experimentally identify factors that switch mitosis to meiosis in plants, it is necessary to develop a high-throughput system to evaluate a large number of candidate genes and treatments, each using large numbers of cells, few of which may gain the ability to induce meiosis.

Target Lines for in Planta Gene Stacking in Japonica Rice

The clustering of transgenes at a chromosome location minimizes the number of segregating loci that needs to be introgressed to field cultivars. Transgenes could be efficiently stacked through site-specific recombination and a recombinase-mediated in planta gene stacking process was described previously in tobacco based on the Mycobacteriophage Bxb1 site-specific integration system. Since this process requires a recombination site in the genome, this work describes the generation of target sites in the Japonica rice genome. Agrobacterium-mediated gene transfer yielded ~4000 random-insertion lines. Seven lines met the criteria of being single copy, not close to a centromere, not inserted within or close to a known gene or repetitive DNA, having precise recombination site sequences on both ends, and able to express the reporter gene. Each target line tested was able to accept the site-specific integration of a new gfp-containing plasmid and in three of those lines, we regenerated fertile plants. These target lines could be used as foundation lines for stacking new traits into Japonica rice.

Split-Cre mediated deletion of DNA no longer needed after site-specific integration in rice

N-cre and C-cre added in separate lines reassemble functional Cre in F1 progeny to excise unnecessary DNA, including cre DNA, thereby eliminating generations needed to cross in and out cre. Crop improvement via transgenesis can benefit through efficient DNA integration strategies. As new traits are developed, new transgenes can be stacked by in planta site-specific integration near previous transgenes, thereby facilitating their introgression to field cultivars as a single segregation locus. However, as each round of integration often requires use of selectable markers, it is more convenient to reuse the selection scheme. The Cre recombinase can be used to delete away previously used selection genes, and other DNA no longer needed after transformation, but the constitutive production of this DNA scanning protein can also affect plant growth. We had previously described in Arabidopsis a split Cre protein fragment complement scheme to reassemble a functional Cre recombinase. As our goal for developing this system was to deploy its use in major crop plants, here we show that Cre protein fragment complementation works in rice with precise recombination structures confirmed by DNA sequencing. As each N-terminal and C-terminal fragment is also flanked by lox recombination sites, they can also self-excise to avoid the need to segregate away the cre DNA. Options to form F1 hybrids homozygous for one transgene, or hemizygous for two different transgenes at the same chromosome location, are discussed.

Site-Specific Sequence Exchange Between Homologous and Non-homologous Chromosomes

Transgene integration typically takes place in an easy-to-transform laboratory variety before the transformation event is introgressed through backcrosses to elite cultivars. As new traits are added to existing transgenic lines, site-specific integration can stack new transgenes into a previously created transgenic locus. In planta site-specific integration minimizes the number of segregating loci to assemble into a breeding line, but cannot break genetic linkage between the transgenic locus and nearby undesirable traits. In this study, we describe an additional feature of an in planta gene-stacking scheme, in which the Cre (control of recombination) recombinase not only deletes transgenic DNA no longer needed after transformation but also mediates recombination between homologous or non-homologous chromosomes. Although the target site must first be introgressed through conventional breeding, subsequent transgenes inserted into the same locus would be able to use Cre-mediated translocation to expedite a linkage drag-free introgression to field cultivars.

I-SceI and customized meganucleases-mediated genome editing in tomato and oilseed rape

Meganucleases are rare cutting enzymes that can generate DNA modifications and are part of the plant genome editing toolkit although they lack versatility. Here, we evaluated the use of two meganucleases, I-SceI and a customized meganuclease, in tomato and oilseed rape. Different strategies were explored for the use of these meganucleases. The activity of a customized and a I-SceI meganucleases was first estimated by the use of a reporter construct GFFP with the target sequences and enabled to demonstrate that both meganucleases can generate double-strand break and HDR mediated recombination in a reporter gene. Interestingly, I-SceI seems to have a higher DSB efficiency than the customized meganuclease: up to 62.5% in tomato and 44.8% in oilseed rape. Secondly, the same exogenous landing pad was introduced in both species. Despite being less efficient compared to I-SceI, the customized meganuclease was able to generate the excision of an exogenous transgene (large deletion of up to 3316 bp) present in tomato. In this paper, we also present some pitfalls to be considered before using meganucleases (e.g., potential toxicity) for plant genome editing.

Sequence modification on demand: search and replace tools for precise gene editing in plants

Until recently, our ability to generate allelic diversity in plants was limited to introduction of variants from domesticated and wild species by breeding via uncontrolled recombination or the use of chemical and physical mutagens-processes that are lengthy and costly or lack specificity, respectively. Gene editing provides a faster and more precise way to create new variation, although its application in plants has been dominated by the creation of short insertion and deletion mutations leading to loss of gene function, mostly due to the dependence of editing outcomes on DNA repair pathway choices intrinsic to higher eukaryotes. Other types of edits such as point mutations and precise and pre-designed targeted sequence insertions have rarely been implemented, despite providing means to modulate the expression of target genes or to engineer the function and stability of their protein products. Several advancements have been developed in recent years to facilitate custom editing by regulation of repair pathway choices or by taking advantage of alternative types of DNA repair. We have seen the advent of novel gene editing tools that are independent of DNA double-strand break repair, and methods completely independent of host DNA repair processes are being increasingly explored. With the aim to provide a comprehensive review of the state-of-the-art methodology for allele replacement in plants, I discuss the adoption of these improvements for plant genome engineering.

FLP-Mediated Site-Specific Gene Integration in Rice

Enabling precise gene integration is important for installing traits in the plants. One of the practical methods of achieving precise gene integration is by using the yeast FLP-FRT recombination system that is efficient in directing DNA integration into the "engineered" genomic sites. The critical parameters of this method include the use of the thermostable version of FLP protein and the promoter trap design to select site-specific integration clones. The resulting transgenic plants display stable expression that is transmitted to the progeny. Therefore, FLP-mediated site-specific integration method could be used for trait engineering in the crop plants or testing gene functions in the model plants.

Efficient Gene Stacking in Rice Using the GAANTRY System

Genetic engineering of rice provides a means for improving rice grain quality and yield, and the introduction and expression of multiple genes can produce new traits that would otherwise be difficult to obtain through conventional breeding. GAANTRY (Gene Assembly in Agrobacterium by Nucleic acid Transfer using Recombinase technologY) was previously shown to be a precise and robust system to stably stack ten genes (28 kilobases (kb)) within an Agrobacterium virulence plasmid Transfer-DNA (T-DNA) and obtain high-quality Arabidopsis and potato transgenic events. To determine whether the GAANTRY system can be used to engineer a monocotyledonous crop, two new T-DNA constructs, carrying five (16.9 kb) or eleven (37.4 kb) cargo sequences were assembled and transformed into rice. Characterization of 53 independent transgenic events demonstrated that more than 50% of the plants carried all of the desired cargo sequences and exhibited the introduced traits. Additionally, more than 18% of the lines were high-quality events containing a single copy of the introduced transgenes and were free of sequences from outside of the T-DNA. Therefore, GAANTRY provides a simple, precise and versatile tool for transgene stacking in rice and potentially other cereal grain crops.

Generation of Marker-Free Transgenic Rice Resistant to Rice Blast Disease Using Ac/Ds Transposon-Mediated Transgene Reintegration System

Rice blast is one of the most serious diseases of rice and a major threat to rice production. Breeding disease-resistant rice is one of the most economical, safe, and effective measures for the control of rice blast. As a complement to traditional crop breeding, the transgenic method can avoid the time-consuming process of crosses and multi-generation selection. In this study, maize (Zea mays) Activator (Ac)/Dissociation (Ds) transposon vectors carrying green fluorescent protein (GFP) and red fluorescent protein (mCherry) genetic markers were used for generating marker-free transgenic rice. Double fluorescent protein-aided counterselection against the presence of T-DNA was performed together with polymerase chain reaction (PCR)-based positive selection for the gene of interest (GOI) to screen marker-free progeny. We cloned an RNAi expression cassette of the rice Pi21 gene that negatively regulates resistance to rice blast as a GOI into the Ds element in the Ac/Ds vector and obtained marker-free T1 rice plants from 13 independent transgenic lines. Marker-free and Ds/GOI-homozygous rice lines were verified by PCR and Southern hybridization analysis to be completely free of transgenic markers and T-DNA sequences. qRT-PCR analysis and rice blast disease inoculation confirmed that the marker-free transgenic rice lines exhibited decreased Pi21 expression levels and increased resistance to rice blast. TAIL-PCR results showed that the Ds (Pi21-RNAi) transgenes in two rice lines were reintegrated in intergenic regions in the rice genome. The Ac/Ds vector with dual fluorescent protein markers offers more reliable screening of marker-free transgenic progeny and can be utilized in the transgenic breeding of rice disease resistance and other agronomic traits.

Particle bombardment technology and its applications in plants

Particle bombardment, or biolistics, has emerged as an excellent alternative approach for plant genetic transformation which circumvents the limitations of Agrobacterium-mediated genetic transformation. The method has no biological constraints and can transform a wide range of plant species. Besides, it has been the most efficient way to achieve organelle transformation (for both chloroplasts and mitochondria) so far. Along with the recent advances in genome editing technologies, conventional gene delivery tools are now being repurposed to deliver targeted gene editing reagents into the plants. One of the key advantages is that the particle bombardment allows DNA-free gene editing of the genome. It enables the direct delivery of proteins, RNAs, and RNPs into plants. Owing to the versatility and wide-range applicability of the particle bombardment, it will likely remain one of the major genetic transformation methods in the future. This article provides an overview of the current status of particle bombardment technology and its applications in the field of plant research and biotechnology.

Clair G, Jones S, Feigenbutz L, Marsh W, Zeng M, Wagner S, Farrell J, Snopek K, Scelonge C, Sopko X, Sander JD, Betts S, Cigan AM, Chilcoat ND. Complex Trait Loci in Maize Enabled by CRISPR-Cas9 Mediated Gene Insertion

Modern maize hybrids often contain biotech and native traits. To-date all biotech traits have been randomly inserted in the genome. Consequently, developing hybrids with multiple traits is expensive, time-consuming, and complex. Here we report using CRISPR-Cas9 to generate a complex trait locus (CTL) to facilitate trait stacking. A CTL consists of multiple preselected sites positioned within a small well-characterized chromosomal region where trait genes are inserted. We generated individual lines, each carrying a site-specific insertion landing pad (SSILP) that was targeted to a preselected site and capable of efficiently receiving a transgene via recombinase-mediated cassette exchange. The selected sites supported consistent transgene expression and the SSILP insertion had no effect on grain yield. We demonstrated that two traits residing at different sites within a CTL can be combined via genetic recombination. CTL technology is a major step forward in the development of multi-trait maize hybrids.

Transcript expression profiling in two contrasting cultivars and molecular cloning of a SKP-1 like gene, a component of SCF-ubiquitin proteasome system from mungbean Vigna radiate L

Protein degradation and turnover under various environmental stresses is basically regulated by ubiquitin-proteasome system (UPS), of which SKP1 is a very essential component. Isolation and cloning of an identified potential stress responsive candidate gene SKP1, was successfully done for the first time to fathom the role of SKP1 in drought tolerance at genetic level in drought tolerant mungbean cultivar Pratap, which was screened after a detailed physio-biochemical screening amongst seven popular mungbean cultivars. The cloned gene SKP1 (accession number KX881912) is 550 bp in length, encodes 114 amino acids. It shows high sequence homology with SKP1 from Zea mays (NP_001148633). The protein expression of isolated SKP1 was confirmed by GUS fused expression using a Histochemical assay under control as well as under drought stress. Further, up-regulation in relative expression level of SKP1 in different plant parts under drought stress confirmed its utility as a potential drought responsive candidate gene certainly demanding extensive genetic research for further incorporation in breeding programs. Moreover, the structure of VrSKP1 (Vigna radiata SKP1) has been modelled, validated and an Essential Dynamics (ED) was done on the Molecular Dynamics (MD) simulation trajectories for filtering large-scale concerted motions. Free-energy calculations on the ED revealed a complex free-energy landscape (FEL) implying the conformational diversity of the modelled VrSPK1 protein.

Utility of I-SceI and CCR5-ZFN nucleases in excising selectable marker genes from transgenic plants

Objectives

Removal of selection marker genes from transgenic plants is highly desirable for their regulatory approval and public acceptance. This study evaluated the use of two nucleases, the yeast homing endonuclease, I-SceI, and the designed zinc finger nuclease, CCR5-ZFN, in excising marker genes from plants using rice and Arabidopsis as the models.

Results

In an in vitro culture assay, both nucleases were effective in precisely excising the DNA fragments marked by the nuclease target sites. However, rice cultures were found to be refractory to transformation with the I-SceI and CCR5-ZFN overexpressing constructs. The inducible I-SceI expression was also problematic in rice as the progeny of the transgenic lines expressing the heat-inducible I-SceI did not inherit the functional gene. On the other hand, heat-inducible I-SceI expression in Arabidopsis was effective in creating somatic excisions in transgenic plants but ineffective in generating heritable excisions. The inducible expression of CCR5-ZFN in rice, although transmitted stably to the progeny, appeared ineffective in creating detectable excisions. Therefore, toxicity of these nucleases in plant cells poses major bottleneck in their application in plant biotechnology, which could be avoided by expressing them transiently in cultures in vitro.

Electronic supplementary material

The online version of this article (10.1186/s13104-019-4304-2) contains supplementary material, which is available to authorized users.

Heat-shock-inducible CRISPR/Cas9 system generates heritable mutations in rice

Transient expression of CRISPR/Cas9 is an effective approach for limiting its activities and improving its precision in genome editing. Here, we describe the heat-shock-inducible CRISPR/Cas9 for controlled genome editing, and demonstrate its efficiency in the model crop, rice. Using the soybean heat-shock protein gene promoter and the rice U3 promoter to express Cas9 and sgRNA, respectively, we developed the heat-shock (HS)-inducible CRISPR/Cas9 system, and tested its efficacy in targeted mutagenesis. Two loci were targeted in rice, and the presence of targeted mutations was determined before and after the HS treatment. Only a low rate of targeted mutagenesis was detected before HS (~16%), but an increased rate of mutagenesis was observed after the HS treatment among the transgenic lines (50-63%). Analysis of regenerated plants harboring HS-CRISPR/Cas9 revealed that targeted mutagenesis was suppressed in the plants but induced by HS, which was detectable by Sanger sequencing after a few weeks of HS treatments. Most importantly, the HS-induced mutations were transmitted to the progeny at a high rate, generating monoallelic and biallelic mutations that independently segregated from the Cas9 gene. Additionally, off-target mutations were either undetectable or found at a lower rate in HS-CRISPR/Cas9 lines as compared to the constitutive-overexpression CRISPR/Cas9 lines. Taken together, this work shows that HS-CRISPR/Cas9 is a controlled and reasonably efficient platform for genome editing, and therefore, a promising tool for limiting genome-wide off-target effects and improving the precision of genome editing.

Gene Stacking in Plants Through the Application of Site-Specific Recombination and Nuclease Activity

Biotechnology methods for inserting genes one by one or as a block of fragment into plant genomes are needed to introduce valuable traits into crop varieties. Insertion of multiple genes into a single site, called as molecular stacking, is important to allow co-inheritance of the genes into the progeny. Generally, two approaches are available for creating gene stacks: nuclease-induced targeted gene integration into native sites and recombinase-mediated gene integration into the engineered sites. The recombinase application is attractive as several recombinases show high efficiency and precision in plant genomes. This chapter describes a gene stacking method based on the use of Cre-lox site-specific recombination system to integrate genes into the engineered sites and nucleases to delete selection genes leading to stacking of traits into a single genomic site. High efficiency and precision, and undetectable off-target effects of Cre-lox in a number of plant species, make it an attractive tool for complex applications such as gene stacking.

Heterologous expression and characterization of a new lipase from Pseudomonas fluorescens Pf0-1 and used for biodiesel production

As a kind of important biocatalysts, Pseudomonas lipases are commonly applied in various industrial fields. Pflip1, a new extracellular lipase gene from Pseudomonas. fluorescens Pf0-1, was first cloned and respectively expressed in Escherichia coli BL21(DE3) and Pichia pastoris KM71, the recombinant proteins Pflip1a and Pflip1b were later purified separately. Then Pflip1a was further characterized. The optimum pH of Pflip1a was 8.0 and its optimal temperature was 70 °C. After incubation at 70 °C for 12 h, Pflip1a could retain over 95% of its original activity. It showed the highest activity towards p-nitrophenyl caprylate. Moreover, its activity was profoundly affected by metal ion, ionic surfactants and organic solvents. Furthermore, the two obtained recombinant lipases were immobilized on the magnetic nanoparticles for biodiesel preparation. The GC analysis showed that for the immobilized lipases Pflip1b and Pflip1a, the biodiesel yield within 24 h respectively attained 68.5% and 80.5% at 70 °C. The activities of the two immobilized lipases still remained 70% and 82% after 10 cycles of operations in non-solvent system. These characteristics and transesterification capacity of the recombinant protein indicated its great potential for organic synthesis, especially for biodiesel production.

Use of Zinc-Finger Nucleases for Crop Improvement

Over the past two decades, new technologies enabling targeted modification of plant genomes have been developed. Among these are zinc-finger nucleases (ZFNs) which are composed of engineered zinc-finger DNA-binding domains fused with a nuclease, generally the FokI nuclease. The zinc-finger domains are composed of a series of four to six 30 amino acid domains that can bind to trinucleotide sequences giving the entire DNA-binding domain specificity to 12-18 nucleotides. Since the FokI nuclease functions as a dimer, pairs of zinc-finger domains are designed to bind upstream and downstream of the cut site which increases the specificity of the complete ZFN to 24-36 nucleotides. The ability of these engineered nucleases to create targeted double-stranded breaks at designated locations throughout the genome has enabled precise deletion, addition, and editing of genes. These techniques are being used to create new genetic variation by deleting or editing endogenous gene sequences and enhancing the efficiency of transgenic product development through targeted insertion of transgenes to specific genomic locations and to sequentially add and/or delete transgenes from existing transgenic events.

Progress of targeted genome modification approaches in higher plants

Transgene integration in plants is based on illegitimate recombination between non-homologous sequences. The low control of integration site and number of (trans/cis)gene copies might have negative consequences on the expression of transferred genes and their insertion within endogenous coding sequences. The first experiments conducted to use precise homologous recombination for gene integration commenced soon after the first demonstration that transgenic plants could be produced. Modern transgene targeting categories used in plant biology are: (a) homologous recombination-dependent gene targeting; (b) recombinase-mediated site-specific gene integration; (c) oligonucleotide-directed mutagenesis; (d) nuclease-mediated site-specific genome modifications. New tools enable precise gene replacement or stacking with exogenous sequences and targeted mutagenesis of endogeneous sequences. The possibility to engineer chimeric designer nucleases, which are able to target virtually any genomic site, and use them for inducing double-strand breaks in host DNA create new opportunities for both applied plant breeding and functional genomics. CRISPR is the most recent technology available for precise genome editing. Its rapid adoption in biological research is based on its inherent simplicity and efficacy. Its utilization, however, depends on available sequence information, especially for genome-wide analysis. We will review the approaches used for genome modification, specifically those for affecting gene integration and modification in higher plants. For each approach, the advantages and limitations will be noted. We also will speculate on how their actual commercial development and implementation in plant breeding will be affected by governmental regulations.

Cre Recombinase and Other Tyrosine Recombinases

Tyrosine-type site-specific recombinases (T-SSRs) have opened new avenues for the predictable modification of genomes as they enable precise genome editing in heterologous hosts. These enzymes are ubiquitous in eubacteria, prevalent in archaea and temperate phages, present in certain yeast strains, but barely found in higher eukaryotes. As tools they find increasing use for the generation and systematic modification of genomes in a plethora of organisms. If applied in host organisms, they enable precise DNA cleavage and ligation without the gain or loss of nucleotides. Criteria directing the choice of the most appropriate T-SSR system for genetic engineering include that, whenever possible, the recombinase should act independent of cofactors and that the target sequences should be long enough to be unique in a given genome. This review is focused on recent advancements in our mechanistic understanding of simple T-SSRs and their application in developmental and synthetic biology, as well as in biomedical research.