Microbial enhanced heavy crude oil recovery through biodegradation using bacterial isolates from an Omani oil field

Optimisation of PAHs biodegradation by Klebsiella pneumonia and Pseudomonas aeruginosa through response surface methodology

Response Surface Methodology (RSM) with Box-Behnken Design (BBD) is used to optimise the Phenanthrene (PHE) degradation process by Klebsiella pneumoniae (K bacteria) and Pseudomonas aeruginosa (P bacteria). Wherein substrate concentration, temperature, and pH at three levels are used as independent variables, and degradation rate of PHE as dependent variables (response). The statistical analysis, via ANOVA, shows coefficient of determination R2 as 0.9848 with significant P value 0.0001 fitting in second-order quadratic regression model for PAHs removal by Klebsiella pneumonia, and R2 as 0.9847 with significant P value 0.0001 by P bacteria. According to the model analysis, temperature (P < 0.0006) is the most influential factor for PHE degradation efficiency by K bacteria, while pH (P < 0.0001) is the most influential factor for PHE degradation by P bacteria. The predicted optimum parameters for K bacteria, namely, temperature, substrate concentration, and pH are found to be 34.00℃, 50.80 mg/L, and 7.50, respectively, and those for P bacteria are 33.30℃, 52.70 mg/L, and 7.20, respectively. At these optimum conditions, the observed PHE removal rates by two bacteria are found to be 83.36% ± 2.1% and 81.23% ± 1.6% in validation experiments, respectively. Thus RSM can optimise the biodegradation conditions of both bacteria for PHE.

Metagenomic analyses of a consortium for the bioremediation of hydrocarbons polluted soils

A bacterial consortium was isolated from a soil in Noblejas (Toledo, Spain) with a long history of mixed hydrocarbons pollution, by enrichment cultivation. Serial cultures of hydrocarbons polluted soil samples were grown in a minimal medium using diesel (1 mL/L) as the sole carbon and energy source. The bacterial composition of the Noblejas Consortium (NC) was determined by sequencing 16S rRNA gene amplicon libraries. The consortium contained around 50 amplicon sequence variants (ASVs) and the major populations belonged to the genera Pseudomonas, Enterobacter, Delftia, Stenotrophomonas, Achromobacter, Acinetobacter, Novosphingobium, Allorhizobium-Neorhizobium-Rhizobium, Ochrobactrum and Luteibacter. All other genera were below 1%. Metagenomic analysis of NC has shown a high abundance of genes encoding enzymes implicated in aliphatic and (poly) aromatic hydrocarbons degradation, and almost all pathways for hydrocarbon degradation are represented. Metagenomic analysis has also allowed the construction of metagenome assembled genomes (MAGs) for the major players of NC. Metatranscriptomic analysis has shown that several of the ASVs are implicated in hydrocarbon degradation, being Pseudomonas, Acinetobacter and Delftia the most active populations.

Phytoremediation of crude oil-contaminated soil using Vigna Unguiculata and associated rhizosphere bacteria

Persistent crude oil contamination poses a significant environmental challenge. In this study, the efficacy of Vigna unguiculata (L.) and associated rhizospheric microorganisms in remediating crude oil-contaminated soil within a microcosm setting was investigated. A randomized block design was employed, and soil samples were subjected to varying degrees of contamination: 0% (UR), 2.5% (CR2), 5.0% (CR5), 7.5% (CR7), and 10.0% (CR10) w/w crude oil. The investigation aimed to assess the potential of Vigna unguiculata (L.) in mitigating crude oil contamination across these defined contamination gradients. The plant growth and crude oil removal were monitored concurrently post-emergence. Plant emergence and growth were significantly affected due to contamination, especially among plants in CR5 and CR10. The bacterial population was higher in the rhizosphere, and the treatments with lower hydrocarbon contamination. It was shown that plant density encouraged the growth of bacterial communities. Significant reduction in soil TPH was observed in CR2 (76.61%) and CR7 (65.88%). There was a strong correlation between plant growth and oil-utilizing bacterial population (r2 = 0.966) and plant growth and hydrocarbon reduction (r2 = 0.956), signifying the role of plant-bacterial synergy. Saturate fractions (C30 - C32) were significantly degraded to lower molecular weight compounds (C11 - C14). Except in CR5 and CR10, the remediation within the cowpea rhizosphere was effective even at regulatory standards. Understanding the rhizosphere ecological dynamics would further highlight the role the bacteria played; hence, it is recommended.

Enrichment of microbial consortia for MEOR in crude oil phase of reservoir-produced liquid and their response to environmental disturbance

Developing microbial consortiums is necessary for microbial enhanced oil recovery (MEOR) in heavy crude oil production. The aqueous phase of produced fluid has long been considered an ideal source of microorganisms for MEOR. However, it is recently found that rich microorganisms (including hydrocarbon-degrading bacteria) are present in the crude oil phase, which is completely different from the aqueous phase of produced fluid. So, in this study, the microbial consortia from the crude oil phase of produced fluids derived from four wells were enriched, respectively. The microbial community structure during passage was dynamically tracked, and the response of enriched consortia to successive disturbance of environmental factors was investigated. The results showed the crude oil phase had high microbial diversity, and the original microbial community structure from four wells was significantly different. After ten generations of consecutive enrichment, different genera were observed in the four enriched microbial consortia, namely, Geobacillus, Bacillus, Brevibacillus, Chelativorans, Ureibacillus, and Ornithinicoccus. In addition, two enriched consortia (eG1614 and eP30) exhibited robustness to temperature and oxygen perturbations. These results further suggested that the crude oil phase of produced fluids can serve as a potential microbial source for MEOR.

Ayka, a Novel Curtobacterium Bacteriophage, Provides Protection against Soybean Bacterial Wilt and Tan Spot

Diseases caused by the Gram-positive bacterium Curtobacteriumflaccumfaciens pv. flaccumfaciens (Cff) inflict substantial economic losses in soybean cultivation. Use of specific bacterial viruses (bacteriophages) for treatment of seeds and plants to prevent the development of bacterial infections is a promising approach for bioprotection in agriculture. Phage control has been successfully tested for a number of staple crops. However, this approach has never been applied to treat bacterial diseases of legumes caused by Cff, and no specific bacteriophages have been known to date. This paper presents detailed characteristics of the first lytic bacteriophage infecting this pathogen. Phage Ayka, related to φ29-like (Salasmaviridae) viruses, but representing a new subfamily, was shown to control the development of bacterial wilt and tan spot in vitro and in greenhouse plants.

Synergistic adsorption and biodegradation of heavy crude oil by a novel hybrid matrix containing immobilized Bacillus licheniformis: Aqueous phase and soil bioremediation

Recently, slurry phase bioremediation as a simple and economical method is shown to be a successful technique for remediation of clayey soils. Besides, the use of microbial cell immobilization as a promising technique has drawn the attention of some researchers. The primary objective of this survey is to examine the synergistic adsorption and biodegradation performance of heavy crude oil by an isolated Bacillus licheniformis immobilized in a novel hybrid matrix (PUF/alginate/microbial cell) in aqueous phase. Isotherm studies and adsorption kinetics of crude oil on PUF matrix were carried out and their results revealed a good correlation between experimental data and Langmuir's isotherm and maximum monolayer coverage was found out to be 1.25 g/g PUF. The other objective of this research is examination of hybrid matrix in slurry phase bioremediation of heavy crude oil polluted clayey soil as a reluctant model soil. In order to model, optimize, and investigate the factors affecting the total organic carbon (TOC) reduction, response surface methodology (RSM) was applied. For this purpose, the effect of three variables including crude oil concentration (5000-25,000 mg/kg dry soil), soil salinity (0-10%), and water to soil ratio (WSR: 2-10) have been studied. In this study, TOC reduction was achieved in ranging from 39% to 80% in crude oil polluted soil after 21 days. Additionally, experiments by polyurethane foam (PUF)-immobilized cell, alginate-immobilized cell, and freely cell suspended systems were conducted to compare the performance of hybrid-immobilized cell with other systems. Our results showed the superiority of immobilized cells in hybrid matrix of PUF/alginate compared to other immobilized cell (IC) and free cell (FC) systems. Overall, the results indicated that the hybrid matrix with simultaneous adsorption-biodegradation capacity is potentially suitable for further development for oil spill treatment and it can be used as an efficient cleaning method in TOC removal from actual polluted soils.

Asphaltene biotransformation for heavy oil upgradation

Globally, the reserves of heavy crude oil are seven times more abundant than that of light crude, and yet, they are underutilized because of their high viscosity and density, which is largely due to the presence of large amounts of asphaltenes. Biotransformation of heavy oil asphaltenes into smaller metabolites can be used for reducing their viscosity. Several microorganisms capable of asphaltene biodegradation have been reported but only few have been characterized for its biotransformation. In the present study, a 9-membered microbial consortium was isolated from an oil contaminated soil. About 72% and 75% asphaltene biotransformation was achieved by growing cells at shake flask level and in a 1.5 l bioreactor, respectively. A representative structure of asphaltene was constructed based on LC–MS, ¹H-NMR, ¹³C-NMR, FT-IR, ICPMS and elemental analysis (CHNS) of n-heptane purified asphaltene from Maya crude oil. Biotransformation of asphaltene, as analyzed by performing ¹H-NMR, FT-IR and elemental analysis, resulted in 80% decrease in S and N when compared to the control along with incorporation of oxygen in the structure of asphaltene. About 91% decrease in the viscosity of the Maya crude oil was observed after two weeks when oil: aqueous phase ratio was 1:9. The results suggest that the isolated microbial consortium can be used for biological upgradation of heavy crude oil. To our knowledge, this is the first report where a microbial consortium resulted in such high asphaltene biotransformation.

Bioaugmentation: possible scenarios due to application of bacterial preparations for remediation of oil-contaminated soil

Although bioaugmentation is known as effective and environmentally friendly method increasing removal of hydrocarbons from oil-contaminated soil, it sometimes fails in soil restoration and disturbs the ecological state of soil. We studied possible scenarios of the introduction of oil-degrading bacteria into oil-contaminated podzolic soil assessing the environmental safety of different bacterial preparations in a long-term field experiment. Integral indicators characterizing the state of biocenosis included biological activity of soil and aboveground biomass of grasses. It has been established that bacterial preparations can have both positive and negative effects on the ecological state of soil and oil biodegradation. Of the five bacterial preparations studied, one had a pronounced positive effect on soil biological activity and oil mineralization processes. Two preparations did not accelerate oil biodegradation and were characterized by a weaker positive effect or even a lack of influence. Two more bacterial preparations had a significant negative impact on soil biological properties. These preparations slowed oil mineralization in soil. Both positive and negative effects of bacterial preparations were observed only during the first two years after their application. All preparations were not effective during the latter stages of long-term remediation processes. The results indicate that successful application of bioaugmentation for the restoration of oil-contaminated soil requires testing of environmental safety of bacterial preparations in a long-term field experiments prior to any treatment processes.

Biosurfactants and Their Applications in the Oil and Gas Industry: Current State of Knowledge and Future Perspectives

Surfactants are a group of amphiphilic chemical compounds (i.e., having both hydrophobic and hydrophilic domains) that form an indispensable component in almost every sector of modern industry. Their significance is evidenced from the enormous volumes that are used and wide diversity of applications they are used in, ranging from food and beverage, agriculture, public health, healthcare/medicine, textiles, and bioremediation. A major drive in recent decades has been toward the discovery of surfactants from biological/natural sources-namely bio-surfactants-as most surfactants that are used today for industrial applications are synthetically-manufactured via organo-chemical synthesis using petrochemicals as precursors. This is problematic, not only because they are derived from non-renewable resources, but also because of their environmental incompatibility and potential toxicological effects to humans and other organisms. This is timely as one of today's key challenges is to reduce our reliance on fossil fuels (oil, coal, gas) and to move toward using renewable and sustainable sources. Considering the enormous genetic diversity that microorganisms possess, they offer considerable promise in producing novel types of biosurfactants for replacing those that are produced from organo-chemical synthesis, and the marine environment offers enormous potential in this respect. In this review, we begin with an overview of the different types of microbial-produced biosurfactants and their applications. The remainder of this review discusses the current state of knowledge and trends in the usage of biosurfactants by the Oil and Gas industry for enhancing oil recovery from exhausted oil fields and as dispersants for combatting oil spills.

Investigation of Bacillus licheniformis in the biodegradation of Iranian heavy crude oil: A two-stage sequential approach containing factor-screening and optimization

Oil pollution is a serious international concern due to its harmful effect on human health and the environment. This study aims to investigate the effective factors on the biodegradation of Iranian heavy crude oil by Bacillus licheniformis. For this purpose, oil removal from the artificial seawater was studied by response surface methodology (RSM). After the screening experiments, pH (4-10), NaCl concentration (0-10 g/L), and oil concentration (500-4500 ppm) were selected as influential factors. Moreover, to evaluate the bacterial capability in bioremediation of an actual polluted site, crude oil spill with a salinity of 35 g/L was experimentally simulated. The proposed model in this study clearly shows that both selected individual factors and their interactions are significantly effective on the crude oil biodegradation capacity. The results showed that Bacillus licheniformis was able to degrade crude oil at different concentrations of oil, especially at low concentrations, which are challenging in actual polluted sites. 15%-66% removal was achieved for 500-4500 ppm of crude oil after 14 days. Furthermore, according to the obtained results, this bacterium can tolerate the salinity up to 3.5%. At this salinity level, crude oil removal was 23.43 and 25.64% in neutral and alkaline conditions, respectively. Process factors were optimized, and 54.8% of crude oil was removed at optimum conditions i.e., 3500 ppm crude oil concentration, 2.5 g/L of NaCl and pH equal to 8.5. Finally, it can be concluded that the selected bacterium of this study can be more effective in harsh environments such as hypersaline and alkaline conditions.

Potential applications of microbial enhanced oil recovery to heavy oil

Heavy oil accounts for around one-third of total global oil and gas resources. The progressive depletion of conventional energy reserves has led to an increased emphasis on the efficient exploitation of heavy oil and bitumen reserves in order to meet energy demand. Therefore, it is imperative to develop new technologies for heavy oil upgrading and recovery. Biologically-based technology that involves using microorganisms or their metabolites to mobilize heavy oil trapped in reservoir rocks can make a significant contribution to the recovery of heavy oils. Here, the results of laboratory experiments and field trials applying microbial enhanced oil recovery (MEOR) technologies are summarized. This review provides an overview of the basic concepts, mechanisms, advantages, problems, and trends in MEOR, and demonstrates the credibility of MEOR methods for applications in enhanced heavy oil recovery and the petroleum refining processes. This technology is cost-effective and environmentally-friendly. The feasibility of MEOR technologies for heavier oil has not yet been fully realized due to the perceived process complexity and a lack of sufficient laboratory research and field test data. However, novel developments such as enzyme-enhanced oil recovery continues to improve MEOR methods.HighlightsHeavy oil represents the largest known potentially-recoverable petroleum energy resource.Novel biotechnological processes are needed to recover or upgrade heavy oil.Microbial technologies have great potential for heavy oil recovery.Microorganisms can produce metabolic byproducts to mobilize oil trapped in reservoirs.More technological research is needed to develop microbial enhanced oil recovery.

Use of Microorganisms in the Recovery of Oil From Recalcitrant Oil Reservoirs: Current State of Knowledge, Technological Advances and Future Perspectives

The depletion of oil resources, increasing global energy demand, the current low, yet unpredictable, price of oil, and increasing maturity of major oil fields has driven the need for the development of oil recovery technologies that are less costly and, where possible, environmentally compatible. Using current technologies, between 20 and 40% of the original oil in a reservoir can be extracted by conventional production operations (e.g., vertical drilling), with secondary recovery methods yielding a further 15-25%. Hence, up to 55% of the original oil can remain unrecovered in a reservoir. Enhanced oil recovery (EOR) is a tertiary recovery process that involves application of different thermal, chemical, and microbial processes to recover an additional 7-15% of the original oil in place (OOIP) at an economically feasible production rate from poor-performing and depleted oil wells. EOR can significantly impact oil production, as increase in the recovery rate of oil by even a small margin could bring significant revenues without developing unconventional resources. Microbial enhanced oil recovery (MEOR) is an attractive, alternative oil recovery approach, which is claimed to potentially recover up to 50% of residual oil. The in situ production of biological surface-active compounds (e.g., biosurfactants) during the MEOR process does not require vast energy inputs and are not affected by global crude oil prices. Compared to other EOR methods, MEOR can be an economically and more environmentally friendly alternative. In this review, the current state of knowledge of MEOR, with insights from discussions with the industry and other stakeholders, is presented and in addition to the future outlook for this technology.

The Potential Application of Microorganisms for Sustainable Petroleum Recovery from Heavy Oil Reservoirs

A microbial enhanced oil recovery (MEOR) technique was tested at low-temperature heavy oil reservoirs (Russia). The bioaugmentation approach used is based on the introduction of hydrocarbon-oxidizing bacteria into the oilfield in combination with an injection of oxygen as a H2O2 solution in order to initiate the first stage of hydrocarbon oxidation and of (NH4)2HPO4 as a source of biogenic elements. Before the pilot trials, the microorganisms of petroleum reservoirs were investigated by high-throughput sequencing, as well as by culture-base and radioisotope techniques. Molecular studies revealed the differences in microbial composition of the carbonate and terrigenous oil reservoirs and the communities of injection and formation water. Aerobic bacteria Rhodococcus erythropolis HO-KS22 and Gordonia amicalis 6-1 isolated from oilfields oxidized oil and produced biosurfactants. Fermentative enrichment and pure cultures produced considerable amounts of low fatty acids and alcohols from sacchariferous substrates. In core-flooding tests, 43.0–53.5% of additional heavy oil was displaced by aerobic bacteria, producing biosurfactants, and 13.4–45.5% of oil was displaced by fermentative bacteria, producing low fatty acids, alcohols, and gas. A total of 1250 t additional oil was recovered as a result of the application of an MEOR technique at the Cheremukhovskoe heavy oil reservoir and Vostochno-Anzirskoe reservoir with light conventional oil.

Degradation of poly aromatic fractions of crude oil and detection of catabolic genes in hydrocarbon-degrading bacteria isolated from Agbabu bitumen sediments in Ondo State

Pollution due to release of Poly aromatic hydrocarbons (PAHs) are a major environmental issue especially in oil producing communities. This study investigates the polyaromatic hydrocarbon degradation potentials of some bacteria: Campylobacter hominis, Bacillus cereus, Dyadobacter koreensis, Pseudomonas aeruginosa and Micrococcus luteus isolated from Agbabu bitumen sediments in Ondo State. The isolates were used singly and in consortium for the degradation of Bonny light crude oil. Concentrations of residual aromatic hydrocarbons in crude oil degraded by these isolates were determined by Gas chromatography/Mass Spectroscopy with flame ionization detector (FID). Detection of catabolic genes (nahH, CatA and AlkB) in the isolates was determined by PCR amplification of their specific primers. The GC-MS analyses showed degradation of poly aromatic hydrocarbons (PAHs) by these isolates. The consortium exhibited the highest PAH reduction (73%) while C. hominis had the least PAH reduction (56%). Dyadobacter koreensis, P. aeruginosa, Micrococcus luteus and B. cereus, displayed 66%, 60%, 59% and 58% PAH reduction respectively. The catabolic gene nahH gene was present in B. cereus, D. koreensis, P. aeruginosa and M. luteus, alkB gene was present in B. cereus, C. hominis, and D. koreensis while CatA was not detected in any of the isolates. The findings of this study affirmed the hydrocarbon-degrading abilities and presence of catabolic genes in these bacteria, these make them potential tools in oil prospecting and cleaning up of hydrocarbon contaminated sites.

Composition of Bacterial and Archaeal Communities in an Alkali-Surfactant-Polyacrylamide-Flooded Oil Reservoir and the Responses of Microcosms to Nutrients

The microbial communities in alkali-surfactant-polyacrylamide-flooded (ASP-flooded) oil reservoirs have rarely been investigated compared to those in water-flooded oil reservoirs. Here, the bacterial and archaeal communities in an ASP-flooded reservoir and the adjacent water-flooded block, and responses of the microbial communities in microcosms to nutrients were investigated by 16S rRNA gene sequencing and cultivation. Compared with the water-flooded block, both the bacterial and archaeal communities inhabiting the ASP-flooded block had lower Sobs indices (91:232 and 34:55, respectively), lower Shannon indices (1.296:2.256 and 0.845:1.627, respectively) and higher Simpson indices (0.391:0.248 and 0.678:0.315, respectively). Halomonas (58.4-82.1%) and Anoxynatronum (14.5-18.2%) predominated in the ASP-flooded production wells, and were less than 0.05% in the bacterial communities of the adjacent water-flooded production wells, which were dominated by Pseudomonas and Thauera. Methanobacterium accounted for 65.0-94.5% of the archaeal communities inhabiting the ASP-flooded production wells, and Methanosaeta (36.7-94.5%) dominated the adjacent water-flooded production wells. After nutrients stimulation, the quantity of cultivable microorganisms increased from 103/mL to 107/mL. Community analysis indicated that the relative abundances of some species that belonged to Halomonas and Pseudomonas obviously increased, yet there were no oil emulsification or dispersion and changes of surface tension of the water-oil mixture. In addition, 6 alkali-tolerating strains showing 98% similarity of 16S rRNA genes with those of Halomonas alkalicola and Halomonas desiderata and 2 strains with 99% similarity with Pseudomonas stutzeri gene were isolated from the nutrients stimulated brines. In summary, this study indicated that Halomonas, Anoxynatronum, and Methanobacterium were dominant populations in the ASP-flooded reservoir, the extreme environment decreased microbial diversity, and restricted microbial growth and metabolisms.

Biodegradation of crude oil by Chelatococcus daeguensis HB-4 and its potential for microbial enhanced oil recovery (MEOR) in heavy oil reservoirs

Biodegradation of crude heavy oil was investigated with Chelatococcus daeguensis HB-4 that was isolated from the produced fluid of Baolige Oilfield in China. Batch growth characterization and crude oil degradation tests confirmed HB-4 to be facultative anaerobic and able to degrade heavy oil. The oil degradation was found to occur through degrading long hydrocarbons chains to shorter ones, resulting in oil viscosity reduction. By mixing crude oil with glucose, or using sole crude oil as carbon source, the content of light fractions (C₈-C₂₂) increased by 4.97% while heavy fractions (C₂₃-C₃₇) decreased by 7.98%. It was also found that bioemulsifiers were produced rather than commonly observed biosurfactants in the fermentation process, which was attributed to the extracellular degradation of hydrocarbons. Core flooding tests demonstrated 20.5% oil recovery by microbial enhancement, and 59.8% viscosity reduction, showing potential of strain HB-4 for application in the oil industry, especially in enhanced heavy oil recovery.

Vertical stratification of bacteria and the chemical compounds in crude oil-contaminated soil layers of the semi-deserted Dzungharian Basin

The largely semi-deserted and deserted Dzungharian Basin sites in the northwest of China geologically represent an extension of the Paleozoic Kazakhstan Block and were once part of an independent continent. For reasons of overdevelopment and unreasonable operations during the process of exploitation and transportation, oil pollutants that were discharged into the soil environment caused serious pollution in this weak ecosystem. To explore the bacterial community composition in detail and their possible origination and potential during the natural attenuation of petroleum contaminants in this type of ecologic niche, GC-MS and high-throughput sequencing techniques were used to resolve the organic compounds and bacterial communities in vertical soil layers. The degradation of petroleum contaminants in semi-deserted and deserted soils mainly occurred in the layer at a depth of 45-55 cm. During this process, aromatic and heterocyclic compounds were significantly enriched in soils. The bacterial communities in this basin exhibited a distinct vertical stratification from the surface layer down to the bottom soil layer. Considering the interaction between the community composition and the geochemical properties, we speculate that the degradation of petroleum contaminants in this semi-deserted and deserted soil might represent a microorganism-mediated process and mainly occur in the deeper soil layer.

Analysis of Bacterial Diversity in Different Heavy Oil Wells of a Reservoir in South Oman with Alkaline pH

The identification of potential hydrocarbon utilizing bacteria is an essential requirement in microbial enhanced oil recovery (MEOR). Molecular approaches like proteomic and genomic characterization of the isolates are replacing the traditional method of identification with systemic classification. Genotypic profiling of the isolates includes fingerprint or pattern-based technique and sequence-based technique. Understanding community structure and dynamics is essential for studying diversity profiles and is challenging in the case of microbial analysis. The present study aims to understand the bacterial community composition from different heavy oil contaminated soil samples collected from geographically related oil well areas in Oman and to identify spore-forming hydrocarbon utilizing cultivable bacteria. V4 region of 16S rDNA gene was the target for Ion PGM™. A total of 825081 raw sequences were obtained from Ion torrent from all the 10 soil samples. The species richness and evenness were found to be moderate in all the samples with four main phyla, Firmicutes, Bacteroidetes, Proteobacteria, and Actinobacteria, the most abundant being Firmicutes. Bacillus sp. ubiquitously dominated in all samples followed by Paenibacillus, which was followed by Brevibacillus, Planococcus, and Flavobacterium. Principal Coordinate Analysis (PCoA) and UPGMA dendrogram clustered the 10 soil samples into four main groups. Weighted UniFrac significance test determined that there was significant difference in the communities present in soil samples examined. It can be concluded that the microbial community was different in all the 10 soil samples with Bacillus and Paenibacillus sp. as predominating genus. The 16S rDNA sequencing of cultivable spore-forming bacteria identified the hydrocarbon utilizing bacteria as Bacillus and Paenibacillus sp. and the nucleotide sequences were submitted to NCBI GenBank under accession numbers KP119097-KP119115. Bacillus and Paenibacillus sp., which were relatively abundant in the oil fields, can be recommended to be chosen as candidates for hydrocarbon utilization study.

Evaluation of conventional and response surface level optimisation of n-dodecane (n-C12) mineralisation by psychrotolerant strains isolated from pristine soil at Southern Victoria Island, Antarctica

Background

Biodegradation of hydrocarbons in Antarctic soil has been reported to be achieved through the utilisation of indigenous cold-adapted microorganisms. Although numerous bacteria isolated from hydrocarbon-contaminated sites in Antarctica were able to demonstrate promising outcomes in utilising hydrocarbon components as their energy source, reports on the utilisation of hydrocarbons by strains isolated from pristine Antarctic soil are scarce. In the present work, two psychrotolerant strains isolated from Antarctic pristine soil with the competency to utilise diesel fuel as the sole carbon source were identified and optimised through conventional and response surface method.

Results

Two potent hydrocarbon-degraders (ADL15 and ADL36) were identified via partial 16S rRNA gene sequence analysis, and revealed to be closely related to the genus Pseudomonas and Rhodococcus sp., respectively. Factors affecting diesel degradation such as temperature, hydrocarbon concentration, pH and salt tolerance were studied. Although strain ADL36 was able to withstand a higher concentration of diesel than strain ADL15, both strains showed similar optimal condition for the cell’s growth at pH 7.0 and 1.0% (w/v) NaCl at the conventional ‘one-factor-at-a-time’ level. Both strains were observed to be psychrotrophs with optimal temperatures of 20 °C. Qualitative and quantitative analysis were performed with a gas chromatograph equipped with a flame ionisation detector to measure the reduction of n-alkane components in diesel. In the pre-screening medium, strain ADL36 showed 83.75% of n-dodecane mineralisation while the reduction of n-dodecane by strain ADL15 was merely at 22.39%. The optimised condition for n-dodecane mineralisation predicted through response surface methodology enhanced the reduction of n-dodecane to 99.89 and 38.32% for strain ADL36 and strain ADL15, respectively.

Conclusions

Strain ADL36 proves to be a better candidate for bioaugmentation operations on sites contaminated with aliphatic hydrocarbons especially in the Antarctic and other cold regions. The results obtained throughout strongly supports the use of RSM for medium optimisation.

Determination of petroleum biodegradation by bacteria isolated from drilling fluid, waste mud pit and crude oil

Objective:

In this study, the aim was to isolate and identify bacterial strains in crude oil, drilling fluid and waste mud pit samples collected from the same oil field, determine the petroleum biodegradation and find the most effective bacteria in the samples in petroleum biodegradation.

Methods:

The contents of crude oil, drilling fluid and waste mud pit samples were enriched in appropriate conditions. Upon identification of the isolated bacteria, the incubations in petroleum containing media were performed at 150 rpm at 30°C for 7 days. Petroleum biodegradations by bacteria were measured by using colorimetric, spectrophotometric and gravimetric methods.

Results:

were isolated from the crude oil sample;

Conclusion:

In literature, no study was encountered showing biodegradation efficiencies of

Draft Genome Sequence of Bacillus subtilis AS2, a Heavy Crude Oil-Degrading and Biosurfactant-Producing Bacterium Isolated from a Soil Sample

Here, we report the draft genome sequence of Bacillus subtilis AS2 that was isolated from heavy crude oil-contaminated soil samples from sludge pits of an Omani heavy-oil field. B. subtilis AS2 was able to biodegrade heavy crude oil and produce biosurfactant. In order to provide a better understanding of the biodegradation mechanism and biosynthesis of metabolites, the B. subtilis AS2 genome was sequenced and compared to those of other B. subtilis strains.

The potential of indigenous Paenibacillus ehimensis BS1 for recovering heavy crude oil by biotransformation to light fractions

Microbial Enhanced Oil Recovery (MEOR) is a potential technology for residual heavy oil recovery. Many heavy oil fields in Oman and elsewhere have difficulty in crude oil recovery because it is expensive due to its high viscosity. Indigenous microbes are capable of improving the fluidity of heavy oil, by changing its high viscosity and producing lighter oil fractions. Many spore-forming bacteria were isolated from soil samples collected from oil fields in Oman. Among the isolates, an autochthonous spore-forming bacterium was found to enhance heavy oil recovery, which was identified by 16S rDNA sequencing as Paenibacillus ehimensis BS1. The isolate showed maximum growth at high heavy oil concentrations within four days of incubation. Biotransformation of heavy crude oil to light aliphatic and aromatic compounds and its potential in EOR was analyzed under aerobic and anaerobic reservoir conditions. The isolates were grown aerobically in Bushnell-Haas medium with 1% (w/v) heavy crude oil. The crude oil analyzed by GC-MS showed a significant biotransformation from the ninth day of incubation under aerobic conditions. The total biotransformation of heavy crude oil was 67.1% with 45.9% in aliphatic and 85.3% in aromatic fractions. Core flooding experiments were carried out by injecting the isolates in brine supplemented with Bushnell-Haas medium into Berea sandstone cores and were incubated for twelve days under oil reservoir conditions (50°C). The extra recovered oil was analyzed by GC-MS. The residual oil recovered from core flood experiments ranged between 10-13% compared to the control experiment. The GC-MS analyses of the extra recovered oil showed 38.99% biotransformation of heavy to light oil. The results also indicated the presence of 22.9% extra aliphatic compounds in the residual crude oil recovered compared to that of a control. The most abundant compound in the extra recovered crude oil was identified as 1-bromoeicosane. The investigations showed the potential of P. ehimensis BS1 in MEOR technology by the biotransformation of heavy to lighter crude oil under aerobic and reservoir conditions. Heavy oil recovery and biotransformation to lighter components are of great economic value and a few studies have been done.

Bioremediation of Heavy Crude Oil Contamination

Crude oil contamination is one of the major environmental concerns and it has drawn interest from researchers and industries. Heavy oils contain 24-64% saturates and aromatics, 14-39% resins and 11-45% asphaltene. Resins and asphaltenes mainly consist of naphthenic aromatic hydrocarbons with alicyclic chains which are the hardest to degrade. Crude oil biodegradation process, with its minimal energy need and environmentally friendly approach, presents an opportunity for bioremediation and as well for enhanced oil recovery to utilize heavy oil resources in an efficient manner. Biodegradation entails crude oil utilization as a carbon source for microorganisms that in turn change the physical properties of heavy crude oil by oxidizing aromatic rings, chelating metals and severing internal bonds/chains between molecules. Biodegradation does not necessarily lower quality of crude oil as there are cases where quality was improved. This paper provides information on heavy crude oil chemistry, bioremediation concept, biodegradation enzymes, cases of Microbial Enhanced heavy crude Oil Recovery (MEOR) and screening criteria towards a better understanding of the biodegradation application. Through the utilization of single microorganisms and consortia, researchers were able to biodegrade single pure hydrocarbon components, transform heavy crude oil fractions to lighter fractions, remove heavy metals and reduce viscosity of crude oil.