Application of a delta-6 desaturase with α-linolenic acid preference on eicosapentaenoic acid production in Mortierella alpina

Production of polyunsaturated fatty acids in pork backfat fermented by Mucor circinelloides

Pork backfat (PB) contains excessive saturated fatty acids (SFAs), but lacks polyunsaturated fatty acids (PUFAs). Excessive SFAs can be used as a substrate for the growth of certain microorganisms that convert them into PUFAs and monounsaturated fatty acids (MUFAs), and the added value of PB can be enhanced. In this study, Mucor circinelloides CBS 277.49 and Lactiplantacillus plantarum CGMCC 24189 were co-cultured for conversion of PB into fermented pork backfat (FPB) with high level of PUFAs. Our results showed that the content of γ-linolenic acid (GLA) and linoleic acid (LA) in the surface of FPB reached 9.04 ± 0.14 mg/g and 107.31 ± 5.16 mg/g for 7-day fermentation, respectively. To convert the internal SFAs of PB, ultrasound combined with papain was used to promote the penetrative growth of M. circinelloides into the internal PB, and the GLA level in the third layer of fat reached 2.58 ± 0.31 mg/g FPB. The internal growth of M. circinelloides in PB was promoted by adjusting the oxygen rate and ventilation rate through the wind velocity sensor. When the oxygen rate is 2 m/s and the ventilation rate is 18 m3/h, the GLA level in the third layer of fat reached 4.13 ± 1.01 mg/g FPB. To further improve the level of PUFAs in PB, FPB was produced by M. circinelloides at 18 °C. The GLA content on the surface of FPB reached 15.73 ± 1.13 mg/g FPB, and the GLA yield in the second and third layers of fat reached 8.68 ± 1.77 mg/g FPB and 6.13 ± 1.28 mg/g FPB, the LA yield in the second and third layers of fat reached 105.45 ± 5.01 mg/g FPB and 98.46 ± 4.14 mg/g FPB, respectively. These results suggested that excessive SFAs in PB can be converted into PUFAs and provided a new technique for improving PUFAs in FPB. KEY POINTS: • This article achieved the conversion of PUFAs in pork backfat by Mucor circinelloides CBS 277.49 and Lactiplantacillus plantarum CGMCC 24189. • This article solved the internal growth of M. circinelloides CBS277.49 in pork backfat by ultrasound combined with papain. • This article proposed an innovative of promoting the internal growth of M. circinelloides and increasing the PUFAs production by oxygen ventilation in pork backfat.

Microalgae biofuels: illuminating the path to a sustainable future amidst challenges and opportunities

The development of microalgal biofuels is of significant importance in advancing the energy transition, alleviating food pressure, preserving the natural environment, and addressing climate change. Numerous countries and regions across the globe have conducted extensive research and strategic planning on microalgal bioenergy, investing significant funds and manpower into this field. However, the microalgae biofuel industry has faced a downturn due to the constraints of high costs. In the past decade, with the development of new strains, technologies, and equipment, the feasibility of large-scale production of microalgae biofuel should be re-evaluated. Here, we have gathered research results from the past decade regarding microalgae biofuel production, providing insights into the opportunities and challenges faced by this industry from the perspectives of microalgae selection, modification, and cultivation. In this review, we suggest that highly adaptable microalgae are the preferred choice for large-scale biofuel production, especially strains that can utilize high concentrations of inorganic carbon sources and possess stress resistance. The use of omics technologies and genetic editing has greatly enhanced lipid accumulation in microalgae. However, the associated risks have constrained the feasibility of large-scale outdoor cultivation. Therefore, the relatively controllable cultivation method of photobioreactors (PBRs) has made it the mainstream approach for microalgae biofuel production. Moreover, adjusting the performance and parameters of PBRs can also enhance lipid accumulation in microalgae. In the future, given the relentless escalation in demand for sustainable energy sources, microalgae biofuels should be deemed a pivotal constituent of national energy planning, particularly in the case of China. The advancement of synthetic biology helps reduce the risks associated with genetically modified (GM) microalgae and enhances the economic viability of their biofuel production.

Linoleic acid enrichment of cheese by okara flour and Geotrichum candidum overexpressing Δ12 fatty acid desaturase

BACKGROUND

Mold-ripened cheeses have low levels of unsaturated fatty acids (UFAs). Geotrichum candidum is an adjunct culture for the development of Geotrichum-ripened cheese but has a low ability to produce high levels of UFAs. Δ12 fatty acid desaturase (FADS12) is a pivotal enzyme that converts oleic acid (OA) to linoleic acid (LA) and plays a vital role in UFA biosynthesis. By investigating FADS12 catalytic activity from various species with OA substrates, we found that FADS12 from Mucor circinelloides (McFADS12) had the highest catalytic activity for OA.

RESULTS

In the current study, a plasmid harboring McFADS12 was constructed and overexpressed in G. candidum. Our results showed that LA production increased to 31.1 ± 1.4% in engineered G. candidum - three times higher than that in wild-type G. candidum. To enhance LA production, an exogenous substrate (OA) was supplemented, and the yield of LA was increased to 154 ± 6 mg L^-1 in engineered G. candidum. Engineered G. candidum was used as an adjunct culture for Geotrichum-ripened cheese production. The LA level reached 74.3 ± 5.4 g kg^-1 cheese, whereas the level of saturated fatty acids (SFAs) decreased by 9.9 ± 0.5%. In addition, the soybean byproduct (okara) was introduced into the engineered G. candidum growth and the level of LA increased to 126 ± 4 g kg^-1 cheese and the percentage of UFAs:SFAs increased from 0.8:1 to 1.3:1.

CONCLUSION

This study offers a suitable technology for converting SFAs to UFAs in Geotrichum-ripened cheeses and provides a novel trend for converting soybean waste into a value-added product. © 2022 Society of Chemical Industry.

Applications of Diacylglycerol Acyltransferase for Triacylglycerol Production in Mortierella alpina

Triacylglycerol (TG) with high-value long-chain polyunsaturated fatty acids is beneficial to human health; consequently, there is an urgent need to broaden its sources due to the current growing demand. Mortierella alpina, one of the most representative oleaginous fungi, is the only certificated source of dietary arachidonic acid-rich oil supplied in infant formula. This study was conducted to improve TG production in M. alpina by homologous overexpression of diacylglycerol acyltransferase (DGAT) and linseed oil (LSO) supplementation. Our results showed that the homologous overexpression of MaDGAT1B and MaDGAT2A strengthened TG biosynthesis and significantly increased the TG content compared to the wild-type by 12.24% and 14.63%, respectively. The supplementation with an LSO concentration of 0.5 g/L elevated the TG content to 83.74% and total lipid yield to 4.26 ± 0.38 g/L in the M. alpina-MaDGAT2A overexpression strain. Our findings provide an effective strategy for enhancing TG production and highlight the role of DGAT in TG biosynthesis in M. alpina.

Engineering Yarrowia lipolytica to produce nutritional fatty acids: Current status and future perspectives

Due to their vital physiological functions, nutritional fatty acids have great potential as nutraceutical food supplements for preventing an array of diseases such as inflammation, depression, arthritis, osteoporosis, diabetes and cancer. Microbial biosynthesis of fatty acids follows the trend of sustainable development, as it enables green, environmentally friendly and efficient production. As a natural oleaginous yeast, Yarrowia lipolytica is especially well-suited for the production of fatty acids. Moreover, it has a variety of genetic engineering tools and novel metabolic engineering strategies that make it a robust workhorse for the production of an array of value-added products. In this review, we summarize recent advances in metabolic engineering strategies for accumulating nutritional fatty acids in Y. lipolytica, including conjugated fatty acids and polyunsaturated fatty acids. In addition, the future prospects of nutritional fatty acid production using the Y. lipolytica platform are discussed in light of the current progress, challenges, and trends in this field. Finally, guidelines for future studies are also emphasized.

Key Enzymes in Fatty Acid Synthesis Pathway for Bioactive Lipids Biosynthesis

Dietary bioactive lipids, one of the three primary nutrients, is not only essential for growth and provides nutrients and energy for life's activities but can also help to guard against disease, such as Alzheimer's and cardiovascular diseases, which further strengthen the immune system and maintain many body functions. Many microorganisms, such as yeast, algae, and marine fungi, have been widely developed for dietary bioactive lipids production. These biosynthetic processes were not limited by the climate and ground, which are also responsible for superiority of shorter periods and high conversion rate. However, the production process was also exposed to the challenges of low stability, concentration, and productivity, which was derived from the limited knowledge about the critical enzyme in the metabolic pathway. Fortunately, the development of enzymatic research methods provides powerful tools to understand the catalytic process, including site-specific mutagenesis, protein dynamic simulation, and metabolic engineering technology. Thus, we review the characteristics of critical desaturase and elongase involved in the fatty acids' synthesis metabolic pathway, which aims to not only provide extensive data for enzyme rational design and modification but also provides a more profound and comprehensive understanding of the dietary bioactive lipids' synthetic process.

The Associations of Erythrocyte Fatty Acids with Whole Blood Mineral Elements in Children

Background. Minerals play important biological roles in lipid metabolism. The primary aim of this study was to examine the relationships between erythrocyte fatty acids (FAs) levels with whole blood mineral elements concentrations among Chinese children. Methods. A cross-sectional study was conducted. A total of 435 children aged 4−7 years were recruited. Whole blood mineral elements were determined by atomic absorption spectrometry and erythrocyte FAs composition by gas chromatography-mass spectrometer. Results. There were direct correlations between Zn and C18:2n-6 (FDR corrected p = 0.019), total n-6 PUFAs (FDR corrected p = 0.034), and total PUFAs (FDR corrected p = 0.034). Direct correlations were found between whole blood Zn and C18:1n-9 (FDR corrected p = 0.035), C24:1n-9 (FDR corrected p = 0.023), total MUFAs (FDR corrected p = 0.023), and C18:2n-6 (FDR corrected p = 0.048) in the Cu < P50 group. In the Cu ≥ P50 group, Mg was inversely related to most FAs (All FDR corrected p < 0.05). In the Zn < P50 group, Cu was directly related to C24:1n-9, total MUFAs, C20:5n-3, C22:6n-3, total n-3 PUFAs, C20:4n-6, total n-6 PUFAs, total PUFAs, and total FAs (All FDR corrected p < 0.05). Conclusions. Whole blood Cu and Zn levels were directly linked to several FAs levels in the erythrocytes of children. The interactions of Mg, Cu, and Zn with fatty acids may affect FA metabolism, in which Mg influences FA absorption.

Highly Valuable Polyunsaturated Fatty Acids from Microalgae: Strategies to Improve Their Yields and Their Potential Exploitation in Aquaculture

Microalgae have a great potential for the production of healthy food and feed supplements. Their ability to convert carbon into high-value compounds and to be cultured in large scale without interfering with crop cultivation makes these photosynthetic microorganisms promising for the sustainable production of lipids. In particular, microalgae represent an alternative source of polyunsaturated fatty acids (PUFAs), whose consumption is related to various health benefits for humans and animals. In recent years, several strategies to improve PUFAs' production in microalgae have been investigated. Such strategies include selecting the best performing species and strains and the optimization of culturing conditions, with special emphasis on the different cultivation systems and the effect of different abiotic factors on PUFAs' accumulation in microalgae. Moreover, developments and results obtained through the most modern genetic and metabolic engineering techniques are described, focusing on the strategies that lead to an increased lipid production or an altered PUFAs' profile. Additionally, we provide an overview of biotechnological applications of PUFAs derived from microalgae as safe and sustainable organisms, such as aquafeed and food ingredients, and of the main techniques (and their related issues) for PUFAs' extraction and purification from microalgal biomass.

Progress of metabolic engineering for the production of eicosapentaenoic acid

Eicosapentaenoic Acid (EPA) is an essential ω-3 polyunsaturated fatty acid for human health. Currently, high-quality EPA production is largely dependent on the extraction of fish oil, but this unsustainable approach cannot meet its rising market demand. Biotechnological approaches for EPA production from microorganisms have received increasing attention due to their suitability for large-scale production and independence of the seasonal or climate restrictions. This review summarizes recent research on different microorganisms capable of producing EPA, such as microalgae, bacteria, and fungi, and introduces the different EPA biosynthesis pathways. Notably, some novel engineering strategies have been applied to endow and improve the abilities of microorganisms to synthesize EPA, including the construction and optimization of the EPA biosynthesis pathway, an increase in the acetyl-CoA pool supply, the increase of NADPH and the inhibition of competing pathways. This review aims to provide an updated summary of EPA production.

Advances in improving the biotechnological application of oleaginous fungus Mortierella alpina

Mortierella alpina is an oleaginous filamentous fungus with considerable lipid productivity, and it has been widely used for industrial production of arachidonic acid. The fermentation process of M. alpina is complicated and can be affected by various factors; therefore, a comprehensive knowledge of its metabolic characteristics and key factors governing lipid biosynthesis is required to further improve its industrial performance. In this review, we discuss the metabolic features and extracellular factors that affect lipid biosynthesis in M. alpina. The current progress in fermentation optimisation and metabolic engineering to improve lipid yield are also summarised. Moreover, we review the applications of M. alpina in the food industry and propose fermentation strategies for better utilisation of this genus in the future. In our opinion, the economic performance of M. alpina should be enhanced from multiple levels, including strains with ideal traits, efficient fermentation strategies, controllable fermentation costs, and competitive products of both high value and productivity. By reviewing the peculiarities of M. alpina and current progress to improve its suitability for biotechnological production, we wish to provide more efficient strategies for future development of M. alpina as a high-value lipid cell factory. KEY POINTS: • Understanding M. alpina metabolism is helpful for rational design of its fermentation processes. • Nitrogen source is a key point that affects PUFA's component and fermentation cost in M. alpina. • Dynamic fermentation strategy combined with breeding is needed to increase lipid yield in M. alpina.

Krill Oil Treatment Increases Distinct PUFAs and Oxylipins in Adipose Tissue and Liver and Attenuates Obesity-Associated Inflammation via Direct and Indirect Mechanisms

The development of obesity is characterized by the metabolic overload of tissues and subsequent organ inflammation. The health effects of krill oil (KrO) on obesity-associated inflammation remain largely elusive, because long-term treatments with KrO have not been performed to date. Therefore, we examined the putative health effects of 28 weeks of 3% (w/w) KrO supplementation to an obesogenic diet (HFD) with fat derived mostly from lard. The HFD with KrO was compared to an HFD control group to evaluate the effects on fatty acid composition and associated inflammation in epididymal white adipose tissue (eWAT) and the liver during obesity development. KrO treatment increased the concentrations of EPA and DHA and associated oxylipins, including 18-HEPE, RvE₂ and 14-HDHA in eWAT and the liver. Simultaneously, KrO decreased arachidonic acid concentrations and arachidonic-acid-derived oxylipins (e.g., HETEs, PGD₂, PGE₂, PGF₂α, TXB₂). In eWAT, KrO activated regulators of adipogenesis (e.g., PPARγ, CEBPα, KLF15, STAT5A), induced a shift towards smaller adipocytes and increased the total adipocyte numbers indicative for hyperplasia. KrO reduced crown-like structures in eWAT, and suppressed HFD-stimulated inflammatory pathways including TNFα and CCL2/MCP-1 signaling. The observed eWAT changes were accompanied by reduced plasma leptin and increased plasma adiponectin levels over time, and improved insulin resistance (HOMA-IR). In the liver, KrO suppressed inflammatory signaling pathways, including those controlled by IL-1β and M-CSF, without affecting liver histology. Furthermore, KrO deactivated hepatic REL-A/p65-NF-κB signaling, consistent with increased PPARα protein expression and a trend towards an increase in IkBα. In conclusion, long-term KrO treatment increased several anti-inflammatory PUFAs and oxylipins in WAT and the liver. These changes were accompanied by beneficial effects on general metabolism and inflammatory tone at the tissue level. The stimulation of adipogenesis by KrO allows for safe fat storage and may, together with more direct PPAR-mediated anti-inflammatory mechanisms, attenuate inflammation.

Lipid metabolism research in oleaginous fungus Mortierella alpina: Current progress and future prospects

The oleaginous fungus Mortierella alpina has distinct advantages in long-chain PUFAs production, and it is the only source for dietary arachidonic acid (ARA) certificated by FDA and European Commission. This review provides an overall introduction to M. alpina, including its major research methods, key factors governing lipid biosynthesis, metabolic engineering and omics studies. Currently, the research interests in M. alpina focus on improving lipid yield and fatty acid desaturation degree by enhancing fatty acid precursors and the reducing power NADPH, and genetic manipulation on PUFAs synthetic pathways is carried to optimise fatty acid composition. Besides, multi-omics studies have been applied to elucidate the global regulatory mechanism of lipogenesis in M. alpina. However, research challenges towards achieving a lipid cell factory lie in strain breeding and cost control due to the coenocytic mycelium, long fermentation period and insufficient conversion rate from carbon to lipid. We also proposed future research goals based on a multilevel regulating strategy: obtaining ideal chassis by directional evolution and high-throughput screening; rewiring central carbon metabolism and inhibiting competitive pathways by multi-gene manipulation system to enhance carbon to lipid conversion rate; optimisation of protein function based on post-translational modification; application of dynamic fermentation strategies suitable for different fermentation phases. By reviewing the comprehensive research progress of this oleaginous fungus, we aim to further comprehend the fungal lipid metabolism and provide reference information and guidelines for the exploration of microbial oils from the perspectives of fundamental research to industrial application.

Multifaceted regulation and functions of fatty acid desaturase 2 in human cancers

As an important hallmark of metabolic reprogramming in cancer, a disruption in fatty acid metabolism contributes to tumor proliferation, cell migration and invasion, and other tumor cell behaviors. In recent years, more and more studies have been conducted on fatty acid desaturase 2 (FADS2), the first rate-limiting enzyme for the biosynthesis of polyunsaturated fatty acids. These studies have found that FADS2 is abnormally expressed in cancers of the breast, lung, liver, and esophagus; melanoma; leukemia; and other malignant tumors. Furthermore, its expression is significantly correlated with tumor proliferation, cell migration and invasion, clonal formation, angiogenesis, ferroptosis, resistance to radiotherapy, histological grade, metastasis to lymph nodes, clinical stage, and prognosis. The abnormal expression of FADS2 results in an imbalance of cell membrane phospholipids, which disrupts the fluidity of the membrane structure and the transmission of signals and promotes the production of proinflammatory factors and arachidonic acid (AA) metabolites, ultimately harming human health. This article aims to systematically review the structural characteristics of FADS2; its function, expression, and mechanism of action; and the factors affecting its activity. This review also provides new ideas and strategies for the development of treatments aimed at the metabolic reprogramming of tumors.

Determination of allosteric and active sites responsible for catalytic activity of delta 12 fatty acid desaturase from Geotrichum candidum and Mortierella alpina by domain swapping

Cheese lacks essential fatty acids (EFAs). Delta 12 fatty acid desaturase (FADS12) is a critical enzyme required for EFA biosynthesis in fermentation of the predominant strains of cheese. Previously, we identified the FADS12 gene and characterized its function for the first time in Geotrichum candidum, a dominant strain used to manufacture soft cheese with white rind. In this study, we analyzed the molecular mechanism of FADS12 function by swapping domains from Mortierella alpina and G. candidum that had, respectively, high and low oleic acid conversion rates. The results revealed three regions that are essential to this process, including regions from the end of the second transmembrane domain to the beginning of the third transmembrane domain, from the end of the third transmembrane domain to the beginning of the fourth transmembrane domain, and from the 30-amino acid from the end of the sixth transmembrane domain to the C-terminal end region. Based on our domain swapping analyses, nine pairs of amino acids including H112, S118, H156, Q161, K301, R306, E307, A309 and S323 in MaFADS12 (K123, A129, N167, M172, T302, D307, I308, E310 and D324 in GcFADS12) were identified as having a significantly effect on FADS12 catalytic efficiency, and linoleic acid and its analogues (12,13-cyclopropenoid fatty acid) were found to inhibit the catalytic activity of FADS12 and related recombinant enzymes. Furthermore, the molecular mechanism of FADS12 inhibition was analyzed. The results revealed two allosteric domains, including one domain from the N-terminal region to the beginning of the first transmembrane domain and another from the 31^st amino acid from the end of the sixth transmembrane domain to the C terminus. Y4 and F398 amino acid residues from MaFADS12 and eight pairs of amino acids including G56, L60, L344, G10, Q13, S24, K326 and L344 in MaFADS12 (while Y66, F70, F345, F20, Y23, Y34, F327 and F345 in GcFADS12) played a pivotal role in FADS12 inhibition. Finally, we found that both allosteric and active sites were responsible for the catalytic activity of FADS12 at various temperatures, pH, and times. This study offers a solid theoretical basis to develop preconditioning methods to increase the rate at which GcFADS12 converts oleic and linoleic acids to produce higher levels of EFAs in cheese.

Genetic engineering of microalgae for enhanced biorefinery capabilities

Microalgae-based bioproducts are in limelight because of their promising future, novel characteristics, the current situation of population needs, and rising prices of rapidly depleting energy resources. Algae-based products are considered as clean sustainable energy and food resources. At present, they are not commercialized due to their high production cost and low yield. In recent years, novel genome editing tools like RNAi, ZNFs, TALENs, and CRISPR/Cas9 are used to enhance the quality and quantity of the desired products. Genetic and metabolic engineering are frequently applied because of their rapid and precise results than random mutagenesis. Omic approaches help enhance biorefinery capabilities and are now in the developing stage for algae. The future is very bright for transgenic algae with increased biomass yield, carbon dioxide uptake rate, accumulating high-value compounds, reduction in cultivation, and production costs, thus reaching the goal in the global algal market and capital flow. However, microalgae are primary producers and any harmful exposure to the wild strains can affect the entire ecosystem. Therefore, strict regulation and monitoring are required to assess the potential risks before introducing genetically modified microalgae into the natural ecosystem.

Systematic genome analysis of a novel arachidonic acid-producing strain uncovered unique metabolic traits in the production of acetyl-CoA-derived products in Mortierellale fungi

The fungi in order Mortierellales are attractive producers for long-chain polyunsaturated fatty acids (PUFAs). Here, the genome sequencing and assembly of a novel strain of Mortierella sp. BCC40632 were done, yielding 65 contigs spanning of 49,964,116 total bases with predicted 12,149 protein-coding genes. We focused on the acetyl-CoA in relevant to its derived metabolic pathways for biosynthesis of macromolecules with biological functions, including PUFAs, eicosanoids and carotenoids. By comparative genome analysis between Mortierellales and Mucorales, the signature genetic characteristics of the arachidonic acid-producing strains, including Δ⁵-desaturase and GLELO-like elongase, were also identified in the strain BCC40632. Remarkably, this fungal strain contained only n-6 pathway of PUFA biosynthesis due to the absence of Δ¹⁵-desaturase or ω3-desaturase gene in contrast to other Mortierella species. Four putative enzyme sequences in the eicosanoid biosynthetic pathways were identified in the strain BCC40632 and others Mortierellale fungi, but were not detected in the Mucorales. Another unique metabolic trait of the Mortierellales was the inability in carotenoid synthesis as a result of the lack of phytoene synthase and phytoene desaturase genes. The findings provide a perspective in strain optimization for production of tailored-made products with industrial applications.

Recent Advances in Microalgal Bioactives for Food, Feed, and Healthcare Products: Commercial Potential, Market Space, and Sustainability

To combat food scarcity as well as to ensure nutritional food supply for sustainable living of increasing population, microalgae are considered as innovative sources for adequate nutrition. Currently, the dried biomass, various carotenoids, phycocyanin, phycoerythrin, omega fatty acids, and enzymes are being used as food additives, food coloring agents, and food supplements. Apart from nutritional importance, microalgae are finding the place in the market as "functional foods." When compared to the total market size of food and feed products derived from all the possible sources, the market portfolio of microalgae-based products is still smaller, but increasing steadily. On the other hand, the genetic modification of microalgae for enhanced production of commercially important metabolites holds a great potential. However, the success of commercial application of genetically modified (GM) algae will be defined by their safety to human health and environment. In view of this, the present study attempts to highlight the industrially important microalgal metabolites, their production, and application in food, feed, nutraceuticals, pharmaceuticals, and cosmeceuticals. The current and future market trends for microalgal products have been thoroughly discussed. Importantly, the safety pertaining to microalgae cultivation and consumption, and regulatory issues for GM microalgae have also been covered.

Ultra Performance Liquid Chromatography-Q Exactive Orbitrap/Mass Spectrometry-Based Lipidomics Reveals the Influence of Nitrogen Sources on Lipid Biosynthesis of Mortierella alpina

The objective of the present study was to reveal the effects of four types of nitrogen sources (soymeal, yeast extract, KNO₃, and ammonium tartrate) on the lipid metabolism of the oleaginous fungus Mortierella alpina using untargeted lipidomics, targeted fatty acid, and reverse transcription quantitative polymerase chain reaction (RT-qPCR) analysis. Our results showed clear differences in the contents and compositions of lipids between four types of nitrogen sources. Soymeal and ammonium tartrate supplementation favored the accumulation of triglycerides with arachidonic acid (ARA) and C_16-18 fatty acids, respectively. These results were further validated by our targeted fatty acid analysis. RT-qPCR analysis of related genes in M. alpina between the four nitrogen source conditions found that soymeal supplementation dramatically increased the expression of GPAT, ELOVL, and Δ12/Δ6 desaturase. Our findings provided new insights into the regulation of lipid biosynthesis in M. alpina and potential avenues for genetic manipulation and highlighted the importance of an optimal nitrogen source for ARA-rich oil production.

Role of Adenosine Monophosphate Deaminase during Fatty Acid Accumulation in Oleaginous Fungus Mortierella alpina

In oleaginous micro-organisms, nitrogen limitation activates adenosine monophosphate deaminase (AMPD) and promotes lipogenesis via the inhibition of isocitrate dehydrogenase. We found that the overexpression of homologous AMPD in Mortierella alpina favored lipid synthesis over cell growth. Total fatty acid content in the recombinant strain was 15.0-34.3% higher than that in the control, even though their biomass was similar. During the early fermentation stage, the intracellular AMP level reduced by 40-60%, together with a 1.9-2.7-fold increase in citrate content compared with the control, therefore provided more precursors for fatty acid synthesis. Moreover, the decreased AMP level resulted in metabolic reprogramming, reflected by the blocked TCA cycle and reduction of amino acids, distributing more carbon to lipid synthesis pathways. By coupling the energy balance with lipogenesis, this study provides new insights into cell metabolism under nitrogen-limited conditions and targets the regulation of fatty acid accumulation in oleaginous micro-organisms.

Δ12 fatty acid desaturase gene from Geotrichum candidum in cheese: molecular cloning and functional characterization

Soft cheese with white rind lacks essential fatty acids (EFAs), and as a result its long-term consumption may lead to various kinds of cardiovascular and cerebrovascular diseases, such as hyperlipidemia, hypertension, and atherosclerosis. Geotrichum candidum is a dimorphic yeast that plays an important role in the ripening of mold cheese. A gene coding for Δ12 fatty acid desaturase, a critical bifunctional enzyme desaturating oleic acid (OA) and linoleic acid (LA) to produce LA and α-linolenic acid (ALA), respectively, was isolated from G. candidum, and then cloned and heterologously expressed in Saccharomyces cerevisiae. This gene, named GcFADS12, had an open reading frame of 1257 bp and codes for a protein of 419 amino acids with a predicted molecular mass of 47.5 kDa. Characterization showed that GcFADS12 had the ability to convert OA to LA and LA to ALA, and the conversion rates for OA and LA were 20.40 ± 0.66% and 6.40 ± 0.57%, respectively. We also found that the protein product of GcFADS12 catalyzes the conversion of the intermediate product (LA) to ALA by addition of OA as the sole substrate. The catalytic activity of GcFADS12 on OA and LA was unaffected by fatty acid concentrations. Kinetic analysis revealed that GcFADS12 had stronger affinity for the OA than for the LA substrate. This study offers a solid basis for improving the production of EFAs by G. candidum in cheese.

Engineering Mannitol Biosynthesis in Escherichia coli and Synechococcus sp. PCC 7002 Using a Green Algal Fusion Protein

The genetic engineering of microbial cell factories is a sustainable alternative to the chemical synthesis of organic compounds. Successful metabolic engineering often depends on manipulating several enzymes, requiring multiple transformation steps and selection markers, as well as protein assembly and efficient substrate channeling. Naturally occurring fusion genes encoding two or more enzymatic functions may offer an opportunity to simplify the engineering process and to generate ready-made protein modules, but their functionality in heterologous systems remains to be tested. Here we show that heterologous expression of a fusion enzyme from the marine alga Micromonas pusilla, comprising a mannitol-1-phosphate dehydrogenase and a mannitol-1-phosphatase, leads to synthesis of mannitol by Escherichia coli and by the cyanobacterium Synechococcus sp. PCC 7002. Neither of the heterologous systems naturally produce this sugar alcohol, which is widely used in food, pharmaceutical, medical, and chemical industries. While the mannitol production rates obtained by single-gene manipulation were lower than those previously achieved after pathway optimization with multiple genes, our findings show that naturally occurring fusion proteins can offer simple building blocks for the assembly and optimization of recombinant metabolic pathways.

Trace elements in wild edible Aplysia species: Relationship with the desaturation-elongation indexes of fatty acids

The profile of essential and non-essential elements was traced in the edible sea hares Aplysia depilans Gmelin, Aplysia fasciata Poiret and Aplysia punctata Cuvier. Manganese (Mn), iron (Fe), zinc (Zn), copper (Cu) and selenium (Se) were identified as the major essential elements. Risk assessment evidenced that the levels of cadmium (Cd) and lead (Pb) did not exceed the maximum limit value established by the European Regulation, the contents of chromium (Cr), nickel (Ni) and arsenic (As) being also below the levels established by the FDA guide. A correlation between trace elements levels and desaturation-elongation indexes of fatty acids was found. While Cd, Se and molybdenum (Mo) seem to promote the desaturation-elongation process involved on the production of C20:4n-6c, Ni, Cr and Fe may potentiate the conversion of C18:3n-3c to C20:5n-3c. Furthermore, cobalt (Co), Ni and Cu appear to decrease Δ9 desaturation index. Besides the suggested biosynthetic switch modulated by trace elements, the nutritional value of the species is further strengthened.

Characterization of an Omega-3 Desaturase From Phytophthora parasitica and Application for Eicosapentaenoic Acid Production in Mortierella alpina

Omega-3 long-chain polyunsaturated fatty acids (LC-PUFAs) have important therapeutic and nutritional benefits in humans. In the biosynthesis pathways of these LC-PUFAs, omega-3 desaturase plays a critical role. In this study, we report a new omega-3 desaturase (PPD17) from Phytophthora parasitica. This desaturase shares high similarities with the known omega-3 desaturases and was expressed in Saccharomyces cerevisiae for the activity and substrate specificity research. The desaturase has a wide omega-6 fatty acid substrate, containing both 18C and 20C fatty acids, and exhibits a strong activity of delta-17 desaturase but a weak activity of delta-15 desaturase. The new desaturase converted the omega-6 arachidonic acid (AA, C20:4) to EPA (an omega-3 LC-PUFA, C20:5) with a substrate conversion rate of 70%. To obtain a high EPA-producing strain, we transformed PPD17 into Mortierella alpina, an AA-producing filamentous fungus. The EPA content of the total fatty acids in reconstruction strains reached 31.5% and was followed by the fermentation optimization of the EPA yield of up to 1.9 g/L. This research characterized a new omega-3 desaturase and provides a possibility of industrially producing EPA using M. alpina.

Application of a ω-3 Desaturase with an Arachidonic Acid Preference to Eicosapentaenoic Acid Production in Mortierella alpina

In the industrial oleaginous fungus Mortierella alpina, the arachidonic acid (AA; C20:4; ω-6) fraction can reach 50% of the total fatty acids (TFAs) in vivo. However, the eicosapentaenoic acid (EPA; C20:5; ω-3) fraction is less than 3% when this fungus is cultivated at a low temperature (12°C). Omega-3 fatty acid desaturase is a key enzyme in ω-3 long-chain polyunsaturated fatty acids biosynthesis pathways. To enhance EPA production, we transformed the ω-3 fatty acid desaturase (PaD17), which exhibits strong Δ-17 desaturase activity, into M. alpina, thus increasing the AA to EPA conversion rate to 49.8%. This PaD17-harboring M. alpina reconstruction strain produced 617 mg L⁻¹ of EPA at room temperature in broth medium, this yield was increased to 1.73 g L⁻¹ after culture medium optimization (i.e., about threefold higher than that under original culture conditions), with concomitant respective increases in dry cell weight and TFA content to 16.55 and 6.46 g L⁻¹. These findings suggest a new platform for the future industrial production of EPA.

Production of eicosapentaenoic acid by application of a delta-6 desaturase with the highest ALA catalytic activity in algae

Dunaliella salina is a unicellular green alga with a high α-linolenic acid (ALA) level, but a low eicosapentaenoic acid (EPA) level. In a previous analysis of the catalytic activity of delta 6 fatty acid desaturase (FADS6) from various species, FADS6 from Thalassiosira pseudonana (TpFADS6), a marine diatom, showed the highest catalytic activity for ALA. In this study, to enhance EPA production in D. salina, FADS6 from D. salina (DsFADS6) was identified, and substrate specificities for DsFADS6 and TpFADS6 were characterized. Furthermore, a plasmid harboring the TpFADS6 gene was constructed and overexpressed in D. salina. Our results revealed that EPA production reached 21.3 ± 1.5 mg/L in D. salina transformants. To further increase EPA production, myoinositol (MI) was used as a growth-promoting agent; it increased the dry cell weight of D. salina transformants, and EPA production reached 91.3 ± 11.6 mg/L. The combination of 12% CO₂ aeration with glucose/KNO₃ in the medium improved EPA production to 192.9 ± 25.7 mg/L in the Ds-TpFADS6 transformant. We confirmed that the increase in ALA was optimal at 8 °C; the EPA percentage reached 41.12 ± 4.78%. The EPA yield was further increased to 554.3 ± 95.6 mg/L by supplementation with 4 g/L perilla seed meal (PeSM), 500 mg/L MI, and 12% CO₂ aeration with glucose/KNO₃ at varying temperatures. EPA production and the percentage of EPA in D. salina were 343.8-fold and 25-fold higher than those in wild-type D. salina, respectively.

IMPORTANCE

FADS6 from Thalassiosira pseudonana, which demonstrates high catalytic activity toward α-linolenic acid, was used to enhance EPA production by Dunaliella salina. Transformation of FADS6 from Thalassiosira pseudonana into Dunaliella salina with myoinositol, CO₂, low temperatures, and perilla seed meal supplementation substantially increased EPA production in Dunaliella salina to 554.3 ± 95.6 mg/L. Accordingly, D. salina could be a potential alternative source of EPA and is suitable for its large-scale production.

Application of high EPA-producing Mortierella alpina in laying hen feed for egg DHA accumulation

Polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid (EPA, C20:5) and docosahexaenoic acid (DHA, C22:6), are beneficial for human health. In this study, we selected a high EPA content (30% in total fatty acids) strain of Mortierella alpina CCFM 698 that overexpressed an ω-3 fatty acid desaturase from Phytophthora parasitica, and investigated the cell growth and lipid accumulation of this strain in a 65 L airlift fermenter with glucose batch feeding. The maximum cell dry weight was 28.7 g L⁻¹ and the highest total fatty acid content was 33.0% (w/w) in cell dry weight. The highest EPA yield was 1.8 g L⁻¹. Both low and high dose supplementation of this strain into the feed of laying hens increased DHA accumulation in the yolk. The highest DHA content of 7.61 mg g⁻¹ yolk was achieved in Fengda-1 laying hens with 4% supplementation and the DHA production per egg was 118.46 mg. However, Hy-Line Brown laying hens displayed a higher DHA production per egg and the value was 131.50, 131.72, 131.95 mg with 1.5%, 2%, 4% supplementation, respectively. The lowest ratio of ω-6/ω-3 PUFAs (3.53) was obtained in Hy-Line Brown laying hens with 4% supplementation. These results suggest that M. alpina CCFM 698 can be used as an alternative source of ω-3 PUFAs in feed to produce nutritious eggs with high DHA content.

A high EPA-producing M. alpina was fermented and added to laying hen feed for egg yolk DHA accumulation.

Molecular mechanisms underlying catalytic activity of delta 6 desaturase from Glossomastix chrysoplasta and Thalassiosira pseudonana

Delta 6 desaturase (FADS2) is a critical bifunctional enzyme required for PUFA biosynthesis. In some organisms, FADS2s have high substrate specificity, whereas in others, they have high catalytic activity. Previously, we analyzed the molecular mechanisms underlying high FADS2 substrate specificity; in this study, we assessed those underlying the high catalytic activity of FADS2s from Glossomastix chrysoplasta and Thalassiosira pseudonana To understand the structural basis of this catalytic activity, GcFADS2 and TpFADS2 sequences were divided into nine sections, and a domain-swapping approach was applied to examine the role of each section in facilitating the catalytic activity of the overall protein. The results revealed two regions essential to this process: one that extends from the end of the fourth to the beginning of the fifth cytoplasmic transmembrane domain, and another that includes the C-terminal region that occurs after the sixth cytoplasmic transmembrane domain. Based on the domain-swapping analyses, the amino acid residues at ten sites were identified to differ between the GcFADS2 and TpFADS2 sequences, and therefore further analyzed by site-directed mutagenesis. T302V, S322A, Y375F, and M384S/M385 substitutions in TpFADS2 significantly affected FADS2 catalytic efficiency. This study offers a solid basis for in-depth understanding of catalytic efficiency of FADS2.

A silver bullet in a golden age of functional genomics: the impact of Agrobacterium-mediated transformation of fungi

The implementation of Agrobacterium tumefaciens as a transformation tool revolutionized approaches to discover and understand gene functions in a large number of fungal species. A. tumefaciens mediated transformation (AtMT) is one of the most transformative technologies for research on fungi developed in the last 20 years, a development arguably only surpassed by the impact of genomics. AtMT has been widely applied in forward genetics, whereby generation of strain libraries using random T-DNA insertional mutagenesis, combined with phenotypic screening, has enabled the genetic basis of many processes to be elucidated. Alternatively, AtMT has been fundamental for reverse genetics, where mutant isolates are generated with targeted gene deletions or disruptions, enabling gene functional roles to be determined. When combined with concomitant advances in genomics, both forward and reverse approaches using AtMT have enabled complex fungal phenotypes to be dissected at the molecular and genetic level. Additionally, in several cases AtMT has paved the way for the development of new species to act as models for specific areas of fungal biology, particularly in plant pathogenic ascomycetes and in a number of basidiomycete species. Despite its impact, the implementation of AtMT has been uneven in the fungi. This review provides insight into the dynamics of expansion of new research tools into a large research community and across multiple organisms. As such, AtMT in the fungi, beyond the demonstrated and continuing power for gene discovery and as a facile transformation tool, provides a model to understand how other technologies that are just being pioneered, e.g. CRISPR/Cas, may play roles in fungi and other eukaryotic species.

Algal Cell Factories: Approaches, Applications, and Potentials

With the advent of modern biotechnology, microorganisms from diverse lineages have been used to produce bio-based feedstocks and bioactive compounds. Many of these compounds are currently commodities of interest, in a variety of markets and their utility warrants investigation into improving their production through strain development. In this review, we address the issue of strain improvement in a group of organisms with strong potential to be productive “cell factories”: the photosynthetic microalgae. Microalgae are a diverse group of phytoplankton, involving polyphyletic lineage such as green algae and diatoms that are commonly used in the industry. The photosynthetic microalgae have been under intense investigation recently for their ability to produce commercial compounds using only light, CO₂, and basic nutrients. However, their strain improvement is still a relatively recent area of work that is under development. Importantly, it is only through appropriate engineering methods that we may see the full biotechnological potential of microalgae come to fruition. Thus, in this review, we address past and present endeavors towards the aim of creating productive algal cell factories and describe possible advantageous future directions for the field.