Enhancement of 1,3-propanediol production from industrial by-product by Lactobacillus reuteri CH53

Inactivation of hydrogenase-3 leads to enhancement of 1,3-propanediol and 2,3-butanediol production by Klebsiella pneumoniae

Klebsiella pneumoniae can use glucose or glycerol as carbon sources to produce 1,3-propanediol or 2,3-butanediol, respectively. In the metabolism of Klebsiella pneumoniae, hydrogenase-3 is responsible for H2 production from formic acid, but it is not directly related to the synthesis pathways for 1,3-propanediol and 2,3-butanediol. In the first part of this research, hycEFG, which encodes subunits of the enzyme hydrogenase-3, was knocked out, so K. pneumoniae ΔhycEFG lost the ability to produce H2 during cultivation using glycerol as a carbon source. As a consequence, the concentration of 1,3-propanediol increased and the substrate (glycerol) conversion ratio reached 0.587 mol/mol. Then, K. pneumoniae ΔldhAΔhycEFG was constructed to erase lactic acid synthesis which led to the further increase of 1,3-propanediol concentration. A substrate (glycerol) conversion ratio of 0.628 mol/mol in batch conditions was achieved, which was higher compared to the wild type strain (0.545 mol/mol). Furthermore, since adhE encodes an alcohol dehydrogenase that catalyzes ethanol production from acetaldehyde, K. pneumoniae ΔldhAΔadhEΔhycEFG was constructed to prevent ethanol production. Contrary to expectations, this did not lead to a further increase, but to a decrease in 1,3-propanediol production. In the second part of this research, glucose was used as the carbon source to produce 2,3-butanediol. Knocking out hycEFG had distinct positive effect on 2,3-butanediol production. Especially in K. pneumoniae ΔldhAΔadhEΔhycEFG, a substrate (glucose) conversion ratio of 0.730 mol/mol was reached, which is higher compared to wild type strain (0.504 mol/mol). This work suggests that the inactivation of hydrogenase-3 may have a global effect on the metabolic regulation of K. pneumoniae, leading to the improvement of the production of two industrially important bulk chemicals, 1,3-propanediol and 2,3-butanediol.

High-Yield Synthesis of Lacto-N-Neotetraose from Glycerol and Glucose in Engineered Escherichia coli

Lacto-N-neotetraose (LNnT) is a neutral human milk oligosaccharide with important biological functions. However, the low LNnT productivity and the incomplete conversion of the intermediate lacto-N-tetraose II (LNT II) currently limited the sustainable biosynthesis of LNnT. First, the LNnT biosynthetic module was integrated in Escherichia coli. Next, the LNnT export system was optimized to alleviate the inhibition of intracellular LNnT synthesis. Furthermore, by utilizing rate-limiting enzyme diagnosis, the expressions of LNnT synthesis pathway genes were finely regulated to further enhance the production yield of LNnT. Subsequently, a strategy of cofermentation using a glucose/glycerol (4:6, g/g) mixed feed was employed to regulate carbon flux distribution. Finally, by overexpressing key transferases, LNnT and LNT II titers reached 112.47 and 7.42 g/L, respectively, in a 5 L fermenter, and 107.4 and 2.08 g/L, respectively, in a 1000 L fermenter. These are the highest reported titers of LNnT to date, indicating its significant potential for industrial production.

Kinetics-based development of two-stage continuous fermentation of 1,3-propanediol from crude glycerol by Clostridium butyricum

BACKGROUND

Glycerol, as a by-product, mainly derives from the conversion of many crops to biodiesel, ethanol, and fatty ester. Its bioconversion to 1,3-propanediol (1,3-PDO) is an environmentally friendly method. Continuous fermentation has many striking merits over fed-batch and batch fermentation, such as high product concentration with easy feeding operation, long-term high productivity without frequent seed culture, and energy-intensive sterilization. However, it is usually difficult to harvest high product concentrations.

RESULTS

In this study, a three-stage continuous fermentation was firstly designed to produce 1,3-PDO from crude glycerol by Clostridium butyricum, in which the first stage fermentation was responsible for providing the excellent cells in a robust growth state, the second stage focused on promoting 1,3-PDO production, and the third stage aimed to further boost the 1,3-PDO concentration and reduce the residual glycerol concentration as much as possible. Through the three-stage continuous fermentation, 80.05 g/L 1,3-PDO as the maximum concentration was produced while maintaining residual glycerol of 5.87 g/L, achieving a yield of 0.48 g/g and a productivity of 3.67 g/(L·h). Based on the 14 sets of experimental data from the first stage, a kinetic model was developed to describe the intricate relationships among the concentrations of 1,3-PDO, substrate, biomass, and butyrate. Subsequently, this kinetic model was used to optimize and predict the highest 1,3-PDO productivity of 11.26 g/(L·h) in the first stage fermentation, while the glycerol feeding concentration and dilution rate were determined to be 92 g/L and 0.341 h-1, separately. Additionally, to achieve a target 1,3-PDO production of 80 g/L without the third stage fermentation, the predicted minimum volume ratio of the second fermenter to the first one was 11.9. The kinetics-based two-stage continuous fermentation was experimentally verified well with the predicted results.

CONCLUSION

A novel three-stage continuous fermentation and a kinetic model were reported. Then a simpler two-stage continuous fermentation was developed based on the optimization of the kinetic model. This kinetics-based development of two-stage continuous fermentation could achieve high-level production of 1,3-PDO. Meanwhile, it provides a reference for other bio-chemicals production by applying kinetics to optimize multi-stage continuous fermentation.

A systematic review on utilization of biodiesel-derived crude glycerol in sustainable polymers preparation

With the rapid development of biodiesel, biodiesel-derived glycerol has become a promising renewable bioresource. The key to utilizing this bioresource lies in the value-added conversion of crude glycerol. While purifying crude glycerol into a pure form allows for diverse applications, the intricate nature of this process renders it costly and environmentally stressful. Consequently, technology facilitating the direct utilization of unpurified crude glycerol holds significant importance. It has been reported that crude glycerol can be bio-transformed or chemically converted into high-value polymers. These technologies provide cost-effective alternatives for polymer production while contributing to a more sustainable biodiesel industry. This review article describes the global production and quality characteristics of biodiesel-derived glycerol and investigates the influencing factors and treatment of the composition of crude glycerol including water, methanol, soap, matter organic non-glycerol, and ash. Additionally, this review also focused on the advantages and challenges of various technologies for converting crude glycerol into polymers, considering factors such as the compatibility of crude glycerol and the control of unfavorable factors. Lastly, the application prospect and value of crude glycerol conversion were discussed from the aspects of economy and environmental protection. The development of new technologies for the increased use of crude glycerol as a renewable feedstock for polymer production will be facilitated by the findings of this review, while promoting mass market applications.

A genome-scale metabolic model of the effect of dissolved oxygen on 1,3-propanediol fermentation by Klebsiella pneumoniae

Although 1,3-propanediol (1,3-PD) is usually considered an anaerobic fermentation product from glycerol by Klebsiella pneumoniae, microaerobic conditions proved to be more conducive to 1,3-PD production. In this study, a genome-scale metabolic model (GSMM) specific to K. pneumoniae KG2, a high 1.3-PD producer, was constructed. The iZY1242 model contains 2090 reactions, 1242 genes and 1433 metabolites. The model was not only able to accurately characterise cell growth, but also accurately simulate the fed-batch 1,3-PD fermentation process. Flux balance analyses by iZY1242 was performed to dissect the mechanism of stimulated 1,3-PD production under microaerobic conditions, and the maximum yield of 1,3-PD on glycerol was 0.83 mol/mol under optimal microaerobic conditions. Combined with experimental data, the iZY1242 model is a useful tool for establishing the best conditions for microaeration fermentation to produce 1,3-PD from glycerol in K. pneumoniae.

Recent advances in metabolic engineering of microorganisms for the production of monomeric C3 and C4 chemical compounds

Bio-based C3 and C4 bi-functional chemicals are useful monomers in biopolymer production. This review describes recent progresses in the biosynthesis of four such monomers as a hydroxy-carboxylic acid (3-hydroxypropionic acid), a dicarboxylic acid (succinic acid), and two diols (1,3-propanediol and 1,4-butanediol). The use of cheap carbon sources and the development of strains and processes for better product titer, rate and yield are presented. Challenges and future perspectives for (more) economical commercial production of these chemicals are also briefly discussed.

Engineering Escherichia coli to assimilate β-alanine as a major carbon source

The threat of global plastic waste accumulation has spurred the exploration of plastics derived from biological sources. A well-known example is polyester made of 1,3-propanediol (1,3-PDO). However, there is no known pathway to assimilate 1,3-PDO into the central carbon metabolism, posing a potential challenge to upcycling such plastic wastes. Here, we proposed that the 1,3-PDO assimilation pathway could pass through malonate semialdehyde (MSA) as an intermediate. Since MSA is a toxic aldehyde, β-alanine was chosen as a surrogate substrate in this study to construct the lower part of the proposed pathway. To this end, we successfully engineered E. coli MG1655 to assimilate β-alanine as the major carbon source. β-alanine could be easily converted into MSA using a β-alanine/pyruvate transaminase from Pseudomonas aeruginosa (PaBapt). However, the subsequent step to generate acetyl-CoA from MSA was unknown. After a series of phenotype screenings, adaptive laboratory evolution and transcriptomic analysis, two CoA-acylating MSA dehydrogenases from Vibrio natriegens (VnMmsD), were found to be able to complete the metabolic pathway. Optical density at 600 nm (OD₆₀₀) of the resulting strain E. coli BA02 could reach 4.5 after 96 h. Two approaches were subsequently used to improve its performance. First, PaBapt and both VnMmsDs were expressed from a single plasmid to mitigate antibiotic stress. Second, a native 3-hydroxy acid dehydrogenase (EcYdfG) was disrupted to address the carbon loss to 3-hydroxypropionate (3-HP) production from MSA. OD₆₀₀ of the best-performing strain E. coli BA07∆ could reach 6 within 24 h using 5 g/L β-alanine. The construction of E. coli BA07∆ lays a solid foundation to establishing a 1,3-PDO assimilation pathway. KEYPOINTS: • This study demonstrates the implementation of a metabolic pathway to assimilate β-alanine as the major carbon source in E. coli MG1655. • Two V. natriegens CoA-acylating methyl malonate semialdehyde dehydrogenases were used to complete the pathway in E. coli BA02. • The construction of E. coli BA02 also revealed the plasmid fusion event between two plasmids with the same replication origin.

Strategies and tools for the biotechnological valorization of glycerol to 1, 3-propanediol: Challenges, recent advancements and future outlook

Global efforts towards decarbonization, environmental sustainability, and a growing impetus for exploiting renewable resources such as biomass have spurred the growth and usage of bio-based chemicals and fuels. In light of such developments, the biodiesel industry will likely flourish, as the transport sector is taking several initiatives to attain carbon-neutral mobility. However, this industry would inevitably generate glycerol as an abundant waste by-product. Despite being a renewable organic carbon source and assimilated by several prokaryotes, presently realizing glycerol-based biorefinery is a distant reality. Among several platform chemicals such as ethanol, lactic acid, succinic acid, 2, 3-butanediol etc. 1, 3-propanediol (1, 3-PDO) is the only chemical naturally produced by fermentation with glycerol as a native substrate. The recent commercialization of glycerol-based 1, 3-PDO by Metabolic Explorer, France, has revived research interests in developing alternate cost-competitive, scalable and marketable bioprocesses. The current review outlines natural glycerol assimilating and 1, 3-PDO-producing microbes, their metabolic pathways, and associated genes. Later, technical barriers are carefully examined, such as the direct use of industrial glycerol as input material and genetic and metabolic issues related to microbes alleviating their industrial use. Biotechnological interventions exploited in the past five years, which can substantially circumvent these challenges, such as microbial bioprospecting, mutagenesis, metabolic, evolutionary and bioprocess engineering, including their combinations, are discussed in detail. The concluding section sheds light on some of the emerging and most promising breakthroughs which have resulted in evolving new, efficient, and robust microbial cell factories and/or bioprocesses for glycerol-based 1, 3-PDO production.

In situ carbon dioxide capture to co-produce 1,3-propanediol, biohydrogen and micro-nano calcium carbonate from crude glycerol by Clostridium butyricum

Background

Climate change caused by greenhouse gas emission has become a global hot topic. Although biotechnology is considered as an environmentally friendly method to produce chemicals, almost all biochemicals face carbon dioxide emission from inevitable respiration and energy metabolism of most microorganisms. To cater for the broad prospect of biochemicals, bioprocess optimization of diverse valuable products is becoming increasingly important for environmental sustainability and cleaner production. Based on Ca(OH)₂ as a CO₂ capture agent and pH regulator, a bioprocess was proposed for co-production of 1,3-propanediol (1,3-PDO), biohydrogen and micro-nano CaCO₃ by Clostridium butyricum DL07.

Results

In fed-batch fermentation, the maximum concentration of 1,3-PDO reached up to 88.6 g/L with an overall productivity of 5.54 g/L/h. This productivity is 31.9% higher than the highest value previously reports (4.20 g/L/h). In addition, the ratio of H₂ to CO₂ in exhaust gas showed a remarkable 152-fold increase in the 5 M Ca(OH)₂ group compared to 5 M NaOH as the CO₂ capture agent. Green hydrogen in exhaust gas ranged between 17.2% and 20.2%, with the remainder being N₂ with negligible CO₂ emissions. During CO₂ capture in situ, micro-nano calcite particles of CaCO₃ with sizes in the range of 300 nm to 20 µm were formed simultaneously. Moreover, when compared with 5M NaOH group, the concentrations of soluble salts and proteins in the fermentation broth of 5 M Ca(OH)₂ group were notably reduced by 53.6% and 44.1%, respectively. The remarkable reduction of soluble salts and proteins would contribute to the separation of 1,3-PDO.

Conclusions

Ca(OH)₂ was used as a CO₂ capture agent and pH regulator in this study to promote the production of 1,3-PDO. Meanwhile, micro-nano CaCO₃ and green H₂ were co-produced. In addition, the soluble salts and proteins in the fermentation broth were significantly reduced.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s13068-022-02190-2.

Production of Polyhydroxyalkanoates through Soybean Hull and Waste Glycerol Valorization: Subsequent Alkaline Pretreatment and Enzymatic Hydrolysis

Alkaline pretreatment and sequential enzymatic hydrolysis of soybean hull were investigated to obtain fermentable sugars for polyhydroxyalkanoates production along with residual glycerol as low-cost carbon sources. Soybean hull is composed of approximately 32% cellulose, 12% hemicellulose, 6% lignin, and 11% protein. Alkaline pretreatment was carried out with 2% NaOH concentration, 10% (w/v) biomass loading, and 60 min incubation time in an autoclave at 120 °C. The response surface methodology (RSM) based on the central composite design (CCD) tool was employed to optimize the enzymatic hydrolysis process, where the variables of biomass loading, enzymes’ concentration, and time were considered. The maximum total reducing sugars concentration obtained was 115.9 g∙L−1 with an enzyme concentration of 11.5 mg protein/g dry substrate for enzyme preparation B1, 2.88 mg protein/g dry substrate for XylA, and 57.6 U/g dry substrate for β-glucosidase, after 42 h at 45 °C, and pH was 4.5. Subsequently, the saccharification step was conducted by increasing the processing scale, using a 1 L tank with stirring with a controlled temperature. Implementing the same enzyme concentrations at pH 4.5, temperature of 45 °C, 260 mL working volume, and incubation time of 42 h, under fed-batch operation with substrate feeding after 14 h and 22 h, a hydrolysate with a concentration of 185.7 g∙L−1 was obtained. Initially, to verify the influence of different carbon sources on Cupriavidus necator DSMz 545 in biomass production, batch fermentations were developed, testing laboratory-grade glucose, soybean hull hydrolysate, and waste glycerol (a by-product of biodiesel processing available in large quantities) as carbon sources in one-factor-at-a-time assays, and the mixture of soybean hull hydrolysate and waste glycerol. Then, the hydrolysate and waste glycerol were consumed by C. necator, producing 12.1 g∙L−1 of biomass and achieving 39% of polyhydroxyalkanoate (PHB) accumulation. To the best of our knowledge, this is the first time that soybean hull hydrolysate has been used as a carbon source to produce polyhydroxyalkanoates, and the results suggest that this agro-industrial by-product is a viable alternative feedstock to produce value-added components.

Metabolic Engineering and Regulation of Diol Biosynthesis from Renewable Biomass in Escherichia coli

As bulk chemicals, diols have wide applications in many fields, such as clothing, biofuels, food, surfactant and cosmetics. The traditional chemical synthesis of diols consumes numerous non-renewable energy resources and leads to environmental pollution. Green biosynthesis has emerged as an alternative method to produce diols. Escherichia coli as an ideal microbial factory has been engineered to biosynthesize diols from carbon sources. Here, we comprehensively summarized the biosynthetic pathways of diols from renewable biomass in E. coli and discussed the metabolic-engineering strategies that could enhance the production of diols, including the optimization of biosynthetic pathways, improvement of cofactor supplementation, and reprogramming of the metabolic network. We then investigated the dynamic regulation by multiple control modules to balance the growth and production, so as to direct carbon sources for diol production. Finally, we proposed the challenges in the diol-biosynthesis process and suggested some potential methods to improve the diol-producing ability of the host.

Production and waste treatment of polyesters: application of bioresources and biotechniques

Chemical resources and techniques have long been used in the history of bulk polyester production and still dominate today's chemical industry. The sustainable development of the polyester industry demands more renewable resources and environmentally benign polyester products. Accordingly, the rapid development of biotechnology has enabled the production of an extensive range of aliphatic and aromatic polyesters from renewable bio-feedstocks. This review addresses the production of representative commercial polyesters (polyhydroxyalkanoates, polylactic acid, poly ε-caprolactone, polybutylene succinate, polyethylene terephthalate, polybutylene terephthalate, polypropylene terephthalate, polyethylene furandicarboxylate, polypropylene furandicarboxylate, and polybutylene furandicarboxylate) or their monomers (lactic acid, succinic acid, 1,4-butanediol, ethylene glycol, terephthalic acid, 1,3-propanediol, and 2,5-furandicarboxylic acid) from renewable bioresources. In addition, this review summarizes advanced biotechniques in the treatment of polyester wastes, representing the near-term trends and future opportunities for waste-to-value recycling and the remediation of polyester wastes under sustainable models. For future prospects, it is essential to further expand: non-food bioresources, optimize bioprocesses and biotechniques in the preparation of bioderived or biodegradable polyesters with promising: material performance, biodegradability, and low production cost.

Strain evolution and novel downstream processing with integrated catalysis enable highly efficient co-production of 1,3-Propanediol and organic acid esters from crude glycerol

Bioconversion of natural microorganisms generally results in a mixture of various compounds. Downstream processing (DSP) which only targets a single product often lacks economic competitiveness due to incomplete use of raw material and high cost of waste treatment for by-products. Here, we show with the efficient microbial conversion of crude glycerol by an artificially evolved strain and how a catalytic conversion strategy can improve the total products yield and process economy of the DSP. Specifically, Clostridium pasteurianum was first adapted to increased concentration of crude glycerol in a novel automatic laboratory evolution system. At m³ scale bioreactor the strain achieved a simultaneous production of 1,3-propanediol (PDO), acetic and butyric acids at 81.21, 18.72 and 11.09 g/L within only 19 h, respectively, representing the most efficient fermentation of crude glycerol to targeted products. A heterogeneous catalytic step was developed and integrated into the DSP process to obtain high-value methyl esters from acetic and butyric acids at high yields. The co-production of the esters also greatly simplified the recovery of PDO. For example, a cosmetic grade PDO (96% PDO) was easily obtained by a simple single-stage distillation process (with an overall yield more than 77%). This integrated approach provides an industrially attractive route for the simultaneous production of three appealing products from the crude glycerol fermentation broth, which greatly improve the process economy and ecology. This article is protected by copyright. All rights reserved.

Contribution of Fermentation Technology to Building Blocks for Renewable Plastics

Large-scale worldwide production of plastics requires the use of large quantities of fossil fuels, leading to a negative impact on the environment. If the production of plastic continues to increase at the current rate, the industry will account for one fifth of global oil use by 2050. Bioplastics currently represent less than one percent of total plastic produced, but they are expected to increase in the coming years, due to rising demand. The usage of bioplastics would allow the dependence on fossil fuels to be reduced and could represent an opportunity to add some interesting functionalities to the materials. Moreover, the plastics derived from bio-based resources are more carbon-neutral and their manufacture generates a lower amount of greenhouse gasses. The substitution of conventional plastic with renewable plastic will therefore promote a more sustainable economy, society, and environment. Consequently, more and more studies have been focusing on the production of interesting bio-based building blocks for bioplastics. However, a coherent review of the contribution of fermentation technology to a more sustainable plastic production is yet to be carried out. Here, we present the recent advancement in bioplastic production and describe the possible integration of bio-based monomers as renewable precursors. Representative examples of both published and commercial fermentation processes are discussed.

A comprehensive review on microbial production of 1,2-propanediol: micro-organisms, metabolic pathways, and metabolic engineering

1,2-Propanediol is an important building block as a component used in the manufacture of unsaturated polyester resin, antifreeze, biofuel, nonionic detergent, etc. Commercial production of 1,2-propanediol through microbial biosynthesis is limited by low efficiency, and chemical production of 1,2-propanediol requires petrochemically derived routes involving wasteful power consumption and high pollution emissions. With the development of various strategies based on metabolic engineering, a series of obstacles are expected to be overcome. This review provides an extensive overview of the progress in the microbial production of 1,2-propanediol, particularly the different micro-organisms used for 1,2-propanediol biosynthesis and microbial production pathways. In addition, outstanding challenges associated with microbial biosynthesis and feasible metabolic engineering strategies, as well as perspectives on the future microbial production of 1,2-propanediol, are discussed.

Metabolic engineering of Lactobacillus reuteri DSM 20,016 for improved 1,3-propanediol production from glycerol

The production of 1,3-propanediol (1,3-PDO) from glycerol was studied by GRAS and native 1,3-PDO producer, Lactobacillus reuteri DSM 20016. This strain ferments glucose with production of lactate, acetate, ethanol, and converts glycerol to 1,3-PDO using NADH generated by glucose metabolism. To improve 1,3-PDO production, alcohol dehydrogenases (ADH) were disrupted and 1,3-PDO oxidoreductases (PDOR) were overexpressed. Deletion of ADH (adh2) enhanced 1,3-PDO production yield on glucose by reducing ethanol synthesis, and overexpression of PDOR (pduQ) elevated 1,3-PDO production rate and cell growth rate. The strain with simultaneous adh2 deletion, pduQ overexpression (Δadh2pduQ⁺⁺) could produce 687 mM 1,3-PDO with the yield of 1.2 ± 0.08 mol 1,3-PDO/mol glucose by fed-batch bioreactor cultivation in 48 h. However, the 1,3-PDO production rate was greatly reduced in the late period of bioreactor culture, mainly due to high lactate accumulation. This is the first report on rational metabolic engineering of L. reuteri for improved 1,3-PDO production.

Effective bioconversion of 1,3-propanediol from biodiesel-derived crude glycerol using organic acid resistance-enhanced Lactobacillus reuteri JH83

Organic acids produced during the fermentation of lactic acid bacteria inhibit cellular growth and the production of 1,3-propanediol (1,3-PDO). Lactobacillus reuteri JH83, which has an increase of 18.6% in organic acid resistance, was obtained through electron beam irradiation mutagenesis irrelevant to the problem of genetically modified organisms. The maximum bioconversion of 1,3-PDO in fed-batch fermentation using pure glycerol by L. reuteri JH83 was 93.2 g/L at 72 h, and the productivity was 1.29 g/L·h, which achieved an increase by 34.6%, compared to that of the wild-type strain. In addition, the result of fed-batch fermentation for the production of 1,3-PDO using crude glycerol was not significantly different from that of pure glycerol. Additionally, transcriptome analysis confirmed changes in the expression levels of sucrose phosphorylase, which is a major facilitator superfamily transporter, and muramyl ligase family proteins, which protect lactic acid bacteria from various stressors, such as organic acids.

The Biocatalytic Production of 3-Hydroxypropionaldehyde and Evaluation of Its Stability

3-Hydroxypropionaldehyde (3-HPA, reuterin) is a broad-spectrum natural antimicrobial agent used in the food industry and other fields. The low yield from the industrial production of 3-HPA using Lactobacillus reuteri and the spontaneous conversion of 3-HPA to acrolein have limited its more widespread use. We isolated L. reuteri BR201 as a biocatalyst for 3-HPA production and confirmed the effect of each factor in the two-step procedure for 3-HPA bioconversion. After initial cultivation for 8 h (late exponential phase), this isolate produced 378 mM of 3-HPA in 1 h at a concentration of OD600 nm 100, 30 °C, and an initial glycerol concentration of 500 mM. This is the highest reported biocatalytic yield of 3-HPA from a glycerol aqueous solution without additives. We confirmed that 4 mM of 3-HPA had antimicrobial activity against five pathogens. The degradation of 3-HPA to acrolein was greater at high temperatures, and there was little degradation when 3-HPA was maintained at 4 °C for 4 weeks. Our results may be useful for future applications of 3-HPA.

Isolation and characterization of a newly identified Clostridium butyricum strain SCUT343-4 for 1,3-propanediol production

A novel 1,3-propanediol (1,3-PDO) producing strain was isolated and identified as Clostridium butyricum with respect to its morphological and physiological characteristics, as well as 16S rDNA. The results of substrates test and stress tolerance indicated that C. butyricum SCUT343-4 could produce 1,3-PDO efficiently from glycerol. The optimal fermentation conditions were determined to be 5 g/L yeast extract at 37 °C and pH 6.5. To fully evaluate its 1,3-PDO production capacity, different cultivation strategies have been implemented. The highest 1,3-PDO concentration obtained for batch and fed-batch fermentation were 51.64 and 61.30 g/L, respectively. Immobilized cell fermentation in fibrous-bed bioreactor was also performed, and the concentration of 1,3-PDO further increased to 86 g/L with a yield of 0.52 g/g. In addition, the 1,3-PDO productivity reached 4.20 g/L h, which is the highest level reported for C. butyricum, demonstrating the potential of C. butyricum SCUT343-4 for 1,3-PDO production from glycerol.

Glycerol waste to value added products and its potential applications

The rapid industrial and economic development runs on fossil fuel and other energy sources. Limited oil reserves, environmental issues, and high transportation costs lead towards carbon unbiased renewable and sustainable fuel. Compared to other carbon-based fuels, biodiesel is attracted worldwide as a biofuel for the reduction of global dependence on fossil fuels and the greenhouse effect. During biodiesel production, approximately 10% of glycerol is formed in the transesterification process in a biodiesel plant. The ditching of crude glycerol is important as it contains salt, free fatty acids, and methanol that cause contamination of soil and creates environmental challenges for researchers. However, the excessive cost of crude glycerol refining and market capacity encourage the biodiesel industries for developing a new idea for utilising and produced extra sources of income and treat biodiesel waste. This review focuses on the significance of crude glycerol in the value-added utilisation and conversion to bioethanol by a fermentation process and describes the opportunities of glycerol in various applications.

Graphic abstract

Culture conditions affect Lactobacillus reuteri DSM 17938 ability to perform glycerol bioconversion into 3-hydroxypropionic acid

The platform molecule 3-hydroxypropionic acid (3-HP) can be produced using Lactobacillus reuteri through a two-step bioprocess that involves a growth phase followed by a bioconversion phase. The bioproduction is performed by resting cells that convert glycerol into 3-HP and 1,3-propanediol in fed-batch mode. This work aimed at studying the effect of the growth conditions of L. reuteri DSM 17938 during the first step, on the glycerol bioconversion into 3-HP during the second step. A Plackett and Burman design was carried out to test, in controlled bioreactors, the effect of 11 growth conditions simultaneously, at fixed bioconversion conditions. The supplementation of the growth medium with vitamin B12 and cysteine displayed a negative effect on the 3-HP bioproduction. The addition of glucose, phytone peptone, Tween 80, 1,2-propanediol and betaine in the growth medium, together with a low temperature and an optimal pH of 6.0 during the growth phase increased the bioconversion duration from 56 h to 89 h at a glycerol feeding rate of 0.5 g·h^-1. A validating experiment displayed that the 3-HP titer, 3-HP production yield and 3-HP specific production rate were significantly improved by 25 %, 150 % and 61 %, respectively.

Recent advances in microbial biosynthesis of C3 - C5 diols: Genetics and process engineering approaches

Diols derived from renewable feedstocks have significant commercial interest in polymer, pharmaceutical, cosmetics, flavors and fragrances, food and feed industries. In C3-C5 diols biological processes of 1,3-propanediol, 1,2-propanediol and 2,3-butanediol have been commercialized as other isomers are non-natural metabolites and lack natural biosynthetic pathways. However, the developments in the field of systems and synthetic biology paved a new path to learn, build, construct, and test for efficient chassis strains. The current review addresses the recent advancements in metabolic engineering, construction of novel pathways, process developments aimed at enhancing in production of C3-C5 diols. The requisites on developing an efficient and sustainable commercial bioprocess for C3-C5 diols were also discussed.

Co-fermentation of glycerol and glucose by a co-culture system of engineered Escherichia coli strains for 1,3-propanediol production without vitamin B12 supplementation

The necessity of costly co-enzyme B₁₂ for the activity of glycerol dehydratase (GDHt) is considered as a major bottleneck in sustainable bioproduction of 1,3-propanediol (1,3-PD) from glycerol. Here, an E. coil Rosetta-dhaB1-dhaB2 strain was constructed by overexpressing a B₁₂-independent GDHt (dhaB1) and its activating factor (dhaB2) from Clostridium butyricum. Subsequently, it was used in designing a co-culture with E. coli BL21-dhaT that overexpressed 1,3-PD oxidoreductase (dhaT), to produce 1,3-PD during co-fermentation of glycerol and glucose. The optimum initial ratio of BL21-dhaT to Rosetta-dhaB1-dhaB2 strains in the co-culture was 1.5. Compared to the fermentation of glycerol alone, co-fermentation approach provided 1.3-folds higher 1,3-PD. Finally, co-fermentation was done in a 10 L bioreactor that produced 41.65 g/L 1,3-PD, which corresponded to 0.69 g/L/h productivity and 0.67 mol/mol yield of 1,3-PD. Hence, the developed co-culture could produce 1,3-PD cost-effectively without requiring vitamin B₁₂.

Clarification of 1,3-Propanediol Fermentation Broths by Using a Ceramic Fine UF Membrane

This work examined the use of a ceramic fine ultrafiltration (UF) membrane for the pre-treatment of 1,3-propanodiol (1,3-PD) fermentation broths. It has been demonstrated that the membrane used provides obtaining a high-quality, sterile permeate, which can be sequentially separated by other processes such as nanofiltration (NF) and membrane distillation (MD). Special attention was paid to the impact of the operational parameters on the membrane performance. The series of UF experiments under transmembrane pressure (TMP) from 0.1 to 0.4 MPa and feed flow rate (Q) from 200 to 400 dm3/h were performed. Moreover, the impact of the feed pH, in the range from 5 to 10, on the flux was investigated. It has been demonstrated that for fine UF, increasing the TMP is beneficial, and TMP equal to 0.4 MPa and Q of 400 dm3/h ensure the highest flux and its long-term stability. It has been shown that in terms of process efficiency, the most favorable pH of the broths is equal to 9.4. An effective and simple method of membrane cleaning was presented. Finally, the resistance-in-series model was applied to describe resistances that cause flux decline. Results obtained in this study can assist in improving the cost-effectiveness of the UF process of 1,3-PD fermentation broths.

Sequential fed-batch fermentation of 1,3-propanediol from glycerol by Clostridium butyricum DL07

The demand for 1,3-propanediol (1,3-PDO) has increased sharply due to its role as a monomer for the synthesis of polytrimethylene terephthalate (PTT). Although Clostridium butyricum is considered to be one of the most promising bioproducers for 1,3-PDO, its low productivity hinders its application on industrial scale because of the longer time needed for anaerobic cultivation. In this study, an excellent C. butyricum (DL07) strain was obtained with high-level titer and productivity of 1,3-PDO, i.e., 104.8 g/L and 3.38 g/(L•h) vs. 94.2 g/L and 3.04 g/(L•h) using pure or crude glycerol as substrate in fed-batch fermentation, respectively. Furthermore, a novel sequential fed-batch fermentation was investigated, in which the next bioreactor was inoculated by C. butyricum DL07 cells growing at exponential phase in the prior bioreactor. It could run steadily for at least eight cycles. The average concentration of 1,3-PDO in eight cycles was 85 g/L with the average productivity of 3.1 g/(L•h). The sequential fed-batch fermentation could achieve semi-continuous production of 1,3-PDO with higher productivity than repeated fed-batch fermentation and would greatly contribute to the industrial production of 1,3-PDO by C. butyricum. KEY POINTS: • A novel C. butyricum strain was screened to produce 104.8 g/L 1,3-PDO from glycerol. • Corn steep liquor powder was used as a cheap nitrogen source for 1,3-PDO production. • A sequential fed-batch fermentation process was established for 1,3-PDO production. • An automatic glycerol feeding strategy was applied in the production of 1,3-PDO.