A multifunctional thermophilic glycoside hydrolase from Caldicellulosiruptor owensensis with potential applications in production of biofuels and biochemicals

Efficient production of sophorose from glucose and its potentially industrial application in cellulase production

Sophorose is the most effective inducer for cellulase production by Trichoderma reesei. Currently, the biosynthesis of sophorose is very inefficient, resulting in that unavailable for cellulase production in industry. In this study, CoGH1A, a multifunctional thermophilic glycoside hydrolase, was employed for sophorose production. Under the optimized conditions, the sophorose yield was 37.86 g/L with a productivity of 9.47 g/L/h which is by far the highest productivity. Meanwhile, the Fe3O4-CS-THP-CoGH1A nanoparticles were constructed to realize the recycling of CoGH1A. After 5 cycles of catalysis, Fe3O4-CS-THP-CoGH1A retained about 83.90 % enzyme activity. Finally, the mixtures of glucose and disaccharides (MGDC) obtained after being catalyzed by CoGH1A was used for cellulase production. As a result, the cellulase productivity achieved 188.38 FPU/L/h in 120 h. These results indicated that sophorose could be efficiently produced from glucose via transglycosylation by CoGH1A, making it possible to be industrially used as the inducer to improving the cellulase productivity.

Responses of microbial community composition and CAZymes encoding gene enrichment in ensiled Elymus nutans to altitudinal gradients in alpine region

High-throughput metagenomic sequence technology was employed to evaluate changes in microbial community composition and carbohydrate-active enzymes encoding gene enrichment status in Elymus nutans silages to altitudinal gradients in the world's highest alpine region of Qinghai-Tibetan Plateau (QTP). E. nutans were collected from three different altitudes in QTP: 2,600 m (low altitude), 3600 m (moderate altitude), and 4,600 m [high (H) altitude], and ensiled for 7, 14, 30, and 60 d. Results indicated an improvement in silage quality with the increasing altitude, although the acetic acid concentration and dry matter loss were greater in H altitude silages after 30 d of ensiling. Harmful bacteria or potential pathogens predominated in the microbial community on d 7 and 14 of fermentation, while genera belonging to lactic acid bacteria gradually became the main microorganisms with the increasing altitude on d 30 and 60 of ensiling. The abundance of carbohydrate-active enzymes genes responsible for macromolecular carbohydrate degradation in silage increased with increasing altitude, and those genes were mainly carried by Lactiplantibacillus and Pediococcus at 30 and 60 d of ensiling. The abundance of key enzymatic genes associated with glycolysis and organic acid production in carbohydrate metabolism pathway was higher in H altitude silages, and Lactiplantibacillus and Pediococcus were also the main hosts after 30 d of silage fermentation, except for the fact that acetic acid production was also related to genera Leuconostoc, Latilactobacillus, and Levilactobacillus.

IMPORTANCE

The fermentation quality of Elymus nutans silage was getting better with the increase of altitude in the Qinghai-Tibetan Plateau. The abundance of hosts carrying carbohydrate-active enzymes genes and key enzyme genes related to organic acid production increased with increasing altitude during the later stages of fermentation. Lactiplantibacillus and Pediococcus were the core microorganisms responsible for both polysaccharide hydrolysis and silage fermentation in the late stage of ensiling. This study provided insights on the influence of different altitudes on the composition and function of silage microbiome in the Qinghai-Tibetan Plateau, and provided a reference approach for improving the quality and controllability of silage production in high altitude areas of the Qinghai-Tibetan Plateau.

Cloning, expression and purification of cellobiohydrolase gene from Caldicellulosiruptor bescii for efficient saccharification of plant biomass

Anthropogenic activities have led to a drastic shift from natural fuels to alternative renewable energy reserves that demand heat-stable cellulases. Cellobiohydrolase is an indispensable member of cellulases that play a critical role in the degradation of cellulosic biomass. This article details the process of cloning the cellobiohydrolase gene from the thermophilic bacterium Caldicellulosiruptor bescii and expressing it in Escherichia coli (BL21) CondonPlus DE3-(RIPL) using the pET-21a(+) expression vector. Multi-alignments and structural modeling studies reveal that recombinant CbCBH contained a conserved cellulose binding domain III. The enzyme's catalytic site included Asp-372 and Glu-620, which are either involved in substrate or metal binding. The purified CbCBH, with a molecular weight of 91.8 kDa, displayed peak activity against pNPC (167.93 U/mg) at 65°C and pH 6.0. Moreover, it demonstrated remarkable stability across a broad temperature range (60-80°C) for 8 h. Additionally, the Plackett-Burman experimental model was employed to assess the saccharification of pretreated sugarcane bagasse with CbCBH, aiming to evaluate the cultivation conditions. The optimized parameters, including a pH of 6.0, a temperature of 55°C, a 24-hour incubation period, a substrate concentration of 1.5% (w/v), and enzyme activity of 120 U, resulted in an observed saccharification efficiency of 28.45%. This discovery indicates that the recombinant CbCBH holds promising potential for biofuel sector.

Significance of glycans in cellulolytic enzymes for lignocellulosic biorefinery - A review

Lignocellulosic (LC) biomass is the most abundant renewable resource for mankind gravitating society towards sustainable solution for energy that can reduce the carbon footprint. The economic feasibility of 'biomass biorefinery' depends upon the efficiency cellulolytic enzymes which is the main crux. Its high production cost and low efficiencies are the major limitations, that need to be resolved. As the complexity of the genome increases, so does the complexity of the proteome, further facilitated by protein post-translational modifications (PTMs). Glycosylation is regarded the major PTMs and hardly any recent work is focused on importance of glycosylation in cellulase. By modifying protein side chains and glycans, superior cellulases with improved stability and efficiency can be obtained. Functional proteomics relies heavily on PTMs because they regulate activity, localization, and interactions with protein, lipid, nucleic acid, and cofactor molecules. O- and N- glycosylation in cellulases influences its characteristics adding positive attributes to the enzymes.

Co-conversion of lignocellulose-derived glucose, xylose, and aromatics to polyhydroxybutyrate by metabolically engineered Cupriavidus necator

Utilization of all major components of lignocellulose is essential for biomass biorefining. Glucose, xylose, and lignin-derived aromatics can be generated from cellulose, hemicellulose, and lignin of lignocellulose degradation through pretreatment and hydrolysis. In present work, Cupriavidus necator H16 was engineered to utilize glucose, xylose, p-coumaric acid, and ferulic acid simultaneously by multi-step genetic engineering. Firstly, genetic modification and adaptive laboratory evolution were performed to promote glucose transmembrane transport and metabolism. Xylose metabolism was then engineered by integrating genes xylAB (xylose isomerase and xylulokinase) and xylE (proton-coupled symporter) in the locus of ldh (lactate dehydrogenase) and ackA (acetate kinase) on the genome, respectively. Thirdly, p-coumaric acid and ferulic acid metabolism was achieved by constructing an exogenous CoA-dependent non-β-oxidation pathway. Using corn stover hydrolysates as carbon sources, the resulting engineered strain Reh06 simultaneously converted all components of glucose, xylose, p-coumaric acid, and ferulic acid to produce 11.51 g/L polyhydroxybutyrate.

Current approaches on the roles of lactic acid bacteria in crop silage

Lactic acid bacteria (LAB) play pivotal roles in the preservation and fermentation of forage crops in spontaneous or inoculated silages. Highlights of silage LAB over the past decades include the discovery of the roles of LAB in silage bacterial communities and metabolism and the exploration of functional properties. The present article reviews published literature on the effects of LAB on the succession, structure, and functions of silage microbial communities involved in fermentation. Furthermore, the utility of functional LAB in silage preparation including feruloyl esterase-producing LAB, antimicrobial LAB, lactic acid bacteria with high antioxidant potential, pesticide-degrading LAB, lactic acid bacteria producing 1,2-propanediol, and low-temperature-tolerant LAB have been described. Compared with conventional LAB, functional LAB produce different effects; specifically, they positively affect animal performance, health, and product quality, among others. In addition, the metabolic profiles of ensiled forages show that plentiful probiotic metabolites with but not limited to antimicrobial, antioxidant, aromatic, and anti-inflammatory properties are observed in silage. Collectively, the current knowledge on the roles of LAB in crop silage indicates there are great opportunities to develop silage not only as a fermented feed but also as a vehicle of delivery of probiotic substances for animal health and welfare in the future.

Biosynthesis of value-added bioproducts from hemicellulose of biomass through microbial metabolic engineering

Hemicellulose is the second most abundant carbohydrate in lignocellulosic biomass and has extensive applications. In conventional biomass refinery, hemicellulose is easily converted to unwanted by-products in pretreatment and therefore can't be fully utilized. The present study aims to summarize the most recent development of lignocellulosic polysaccharide degradation and fully convert it to value-added bioproducts through microbial and enzymatic catalysis. Firstly, bioprocess and microbial metabolic engineering for enhanced utilization of lignocellulosic carbohydrates were discussed. The bioprocess for degradation and conversion of natural lignocellulose to monosaccharides and organic acids using anaerobic thermophilic bacteria and thermostable glycoside hydrolases were summarized. Xylose transmembrane transporting systems in natural microorganisms and the latest strategies for promoting the transporting capacity by metabolic engineering were summarized. The carbon catabolite repression effect restricting xylose utilization in microorganisms, and metabolic engineering strategies developed for co-utilization of glucose and xylose were discussed. Secondly, the metabolic pathways of xylose catabolism in microorganisms were comparatively analyzed. Microbial metabolic engineering for converting xylose to value-added bioproducts based on redox pathways, non-redox pathways, pentose phosphate pathway, and improving inhibitors resistance were summarized. Thirdly, strategies for degrading lignocellulosic polysaccharides and fully converting hemicellulose to value-added bioproducts through microbial metabolic engineering were proposed.

Biochemical and Regulatory Analyses of Xylanolytic Regulons in Caldicellulosiruptor bescii Reveal Genus-Wide Features of Hemicellulose Utilization

Caldicellulosiruptor species scavenge carbohydrates from runoff containing plant biomass that enters hot springs and from grasses that grow in more moderate parts of thermal features. While only a few Caldicellulosiruptor species can degrade cellulose, all known species are hemicellulolytic. The most well-characterized species, Caldicellulosiruptor bescii, decentralizes its hemicellulase inventory across five different genomic loci and two isolated genes. Transcriptomic analyses, comparative genomics, and enzymatic characterization were utilized to assign functional roles and determine the relative importance of its six putative endoxylanases (five glycoside hydrolase family 10 [GH10] enzymes and one GH11 enzyme) and two putative exoxylanases (one GH39 and one GH3) in C. bescii. Two genus-wide conserved xylanases, C. bescii XynA (GH10) and C. bescii Xyl3A (GH3), had the highest levels of sugar release on oat spelt xylan, were in the top 10% of all genes transcribed by C. bescii, and were highly induced on xylan compared to cellulose. This indicates that a minimal set of enzymes are used to drive xylan degradation in the genus Caldicellulosiruptor, complemented by hemicellulolytic inventories that are tuned to specific forms of hemicellulose in available plant biomasses. To this point, synergism studies revealed that the pairing of specific GH family proteins (GH3, -11, and -39) with C. bescii GH10 proteins released more sugar in vitro than mixtures containing five different GH10 proteins. Overall, this work demonstrates the essential requirements for Caldicellulosiruptor to degrade various forms of xylan and the differences in species genomic inventories that are tuned for survival in unique biotopes with variable lignocellulosic substrates. IMPORTANCE Microbial deconstruction of lignocellulose for the production of biofuels and chemicals requires the hydrolysis of heterogeneous hemicelluloses to access the microcrystalline cellulose portion. This work extends previous in vivo and in vitro efforts to characterize hemicellulose utilization by integrating genomic reconstruction, transcriptomic data, operon structures, and biochemical characteristics of key enzymes to understand the deployment and functionality of hemicellulases by the extreme thermophile Caldicellulosiruptor bescii. Furthermore, comparative genomics of the genus revealed both conserved and divergent mechanisms for hemicellulose utilization across the 15 sequenced species, thereby paving the way to connecting functional enzyme characterization with metabolic engineering efforts to enhance lignocellulose conversion.

Changes in chemical composition, structural and functional microbiome during alfalfa (Medicago sativa) ensilage with Lactobacillus plantarum PS-8

Improving silage production by adding exogenous microorganisms not only maximizes nutrient preservation, but also extends product shelf life. Herein, changes in the quality and quantity of Lactobacillus plantarum PS-8 (PS-8) -inoculated alfalfa (Medicago sativa) during silage fermentation were monitored at d 0, 7, 14, and 28 (inoculum dose of PS-8 was 1 × 105 colony forming units [cfu]/g fresh weight; 50 kg per bag; 10 bags for each time point) by reconstructing metagenomic-assembled genomes (MAG) and Growth Rate InDex (GRiD). Our results showed that the exogenous starter bacterium, PS-8 inoculation, became the most dominating strain by d 7, and possibly played a highly active role throughout the fermentation process. The pH value of the silage decreased greatly, accompanied by the growth of acid-producing microorganisms namely PS-8, which inhibited the growth of harmful microorganisms like molds (4.18 vs. 1.42 log cfu/g) and coliforms (4.95 vs. 0.66 log most probable number [MPN]/g). The content of neutral detergent fiber (NDF) decreased significantly (41.6% vs. 37.6%; dry matter basis). In addition, the abundance and diversity of genes coding microbial carbohydrate-active enzymes (CAZymes) increased significantly and desirably throughout the fermentation, particularly the genes responsible for degrading starch, arabino-xylan, and cellulose. Overall, our results showed that PS-8 was replicating rapidly and consistently during early- and mid-fermentation phases, promoting the growth of beneficial lactic acid bacteria and inhibiting undesirable microbes, ultimately improving the quality of silage.

Highly Efficient Biotransformation of Notoginsenoside R1 into Ginsenoside Rg1 by Dictyoglomus thermophilum β-xylosidase Xln-DT

Notoginsenoside R1 and ginsenoside Rg1 are the main active ingredients of Panax notoginseng, exhibiting anti-fatigue, anti-tumor, anti-inflammatory, and other activities. In a previous study, a GH39 β-xylosidase Xln-DT was responsible for the bioconversion of saponin, a natural active substance with a xylose group, with high selectivity for cleaving the outer xylose moiety of notoginsenoside R1 at the C-6 position, producing ginsenoside Rg1 with potent anti-fatigue activity. The optimal bioconversion temperature, pH, and enzyme dosage were obtained by optimizing the transformation conditions. Under optimal conditions (pH 6.0, 75°C, enzyme dosage 1.0 U/ml), 1.0 g/l of notoginsenoside R1 was converted into 0.86 g/l of ginsenoside Rg1 within 30 min, with a molar conversion rate of approximately 100%. Furthermore, the in vivo anti-fatigue activity of notoginsenoside R1 and ginsenoside Rg1 were compared using a suitable rat model. Compared with the control group, the forced swimming time to exhaustion was prolonged in mice by 17.3% in the Rg1 high group (20 mg/kg·d). Additionally, the levels of hepatic glycogen (69.9-83.3% increase) and muscle glycogen (36.9-93.6% increase) were increased. In the Rg1 group, hemoglobin levels were also distinctly increased by treatment concentrations. Our findings indicate that treatment with ginsenoside Rg1 enhances the anti-fatigue effects. In this study, we reveal a GH39 β-xylosidase displaying excellent hydrolytic activity to produce ginsenoside Rg1 in the pharmaceutical and food industries.

Fungal cellulases: protein engineering and post-translational modifications

Enzymatic degradation of lignocelluloses into fermentable sugars to produce biofuels and other biomaterials is critical for environmentally sustainable development and energy resource supply. However, there are problems in enzymatic cellulose hydrolysis, such as the complex cellulase composition, low degradation efficiency, high production cost, and post-translational modifications (PTMs), all of which are closely related to specific characteristics of cellulases that remain unclear. These problems hinder the practical application of cellulases. Due to the rapid development of computer technology in recent years, computer-aided protein engineering is being widely used, which also brings new opportunities for the development of cellulases. Especially in recent years, a large number of studies have reported on the application of computer-aided protein engineering in the development of cellulases; however, these articles have not been systematically reviewed. This article focused on the aspect of protein engineering and PTMs of fungal cellulases. In this manuscript, the latest literatures and the distribution of potential sites of cellulases for engineering have been systematically summarized, which provide reference for further improvement of cellulase properties. KEY POINTS: •Rational design based on virtual mutagenesis can improve cellulase properties. •Modifying protein side chains and glycans helps obtain superior cellulases. •N-terminal glutamine-pyroglutamate conversion stabilizes fungal cellulases.

Overexpression and characterization of a novel GH4 galactosidase with β-galactosidase activity from Bacillus velezensis SW5

A novel galactosidase gene (gal3149) was identified from Bacillus velezensis SW5 and heterologously expressed in Escherichia coli BL21 (DE3). The novel galactosidase, Gal3149, encoded by gal3149 in an open reading frame of 1,299 bp, was 433 amino acids in length. Protein sequence analysis showed that Gal3149 belonged to family 4 of glycoside hydrolases (GH4). Gal3149 displayed higher enzyme activity for the substrate 2-nitrophenyl-β-d-galactopyranoside (oNPG) than for 4-nitrophenyl-α-d-galactopyranoside (pNPαG). This is the first time that an enzyme belonging to GH4 has been shown to exhibit β-galactosidase activity. Gal3149 showed optimal activity at pH 8.0 and 50°C, and exhibited excellent thermal stability, with retention of 50% relative activity after incubation at a temperature range of 0 to 50°C for 48 h. Gal3149 activity was significantly improved by K⁺ and Na⁺, and was strongly or completely inhibited by Ag⁺, Zn²⁺, Tween-80, Cu²⁺, carboxymethyl cellulose, and oleic acid. The rate of hydrolyzed lactose in 1 mL of milk by 1 U of Gal3149 reached about 50% after incubation for 4 h. These properties lay a solid foundation for Gal3149 in application of the lactose-reduced dairy industry.

Depolymerization and conversion of lignin to value-added bioproducts by microbial and enzymatic catalysis

Lignin, the most abundant renewable aromatic compound in nature, is an excellent feedstock for value-added bioproducts manufacturing; while the intrinsic heterogeneity and recalcitrance of which hindered the efficient lignin biorefinery and utilization. Compared with chemical processing, bioprocessing with microbial and enzymatic catalysis is a clean and efficient method for lignin depolymerization and conversion. Generally, lignin bioprocessing involves lignin decomposition to lignin-based aromatics via extracellular microbial enzymes and further converted to value-added bioproducts through microbial metabolism. In the review, the most recent advances in degradation and conversion of lignin to value-added bioproducts catalyzed by microbes and enzymes were summarized. The lignin-degrading microorganisms of white-rot fungi, brown-rot fungi, soft-rot fungi, and bacteria under aerobic and anaerobic conditions were comparatively analyzed. The catalytic metabolism of the microbial lignin-degrading enzymes of laccase, lignin peroxidase, manganese peroxidase, biphenyl bond cleavage enzyme, versatile peroxidase, and β-etherize was discussed. The microbial metabolic process of H-lignin, G-lignin, S-lignin based derivatives, protocatechuic acid, and catechol was reviewed. Lignin was depolymerized to lignin-derived aromatic compounds by the secreted enzymes of fungi and bacteria, and the aromatics were converted to value-added compounds through microbial catalysis and metabolic engineering. The review also proposes new insights for future work to overcome the recalcitrance of lignin and convert it to value-added bioproducts by microbial and enzymatic catalysis.

A structural and kinetic survey of GH5_4 endoglucanases reveals determinants of broad substrate specificity and opportunities for biomass hydrolysis

Broad-specificity glycoside hydrolases (GHs) contribute to plant biomass hydrolysis by degrading a diverse range of polysaccharides, making them useful catalysts for renewable energy and biocommodity production. Discovery of new GHs with improved kinetic parameters or more tolerant substrate-binding sites could increase the efficiency of renewable bioenergy production even further. GH5 has over 50 subfamilies exhibiting selectivities for reaction with β-(1,4)-linked oligo- and polysaccharides. Among these, subfamily 4 (GH5_4) contains numerous broad-selectivity endoglucanases that hydrolyze cellulose, xyloglucan, and mixed-linkage glucans. We previously surveyed the whole subfamily and found over 100 new broad-specificity endoglucanases, although the structural origins of broad specificity remained unclear. A mechanistic understanding of GH5_4 substrate specificity would help inform the best protein design strategies and the most appropriate industrial application of broad-specificity endoglucanases. Here we report structures of 10 new GH5_4 enzymes from cellulolytic microbes and characterize their substrate selectivity using normalized reducing sugar assays and MS. We found that GH5_4 enzymes have the highest catalytic efficiency for hydrolysis of xyloglucan, glucomannan, and soluble β-glucans, with opportunistic secondary reactions on cellulose, mannan, and xylan. The positions of key aromatic residues determine the overall reaction rate and breadth of substrate tolerance, and they contribute to differences in oligosaccharide cleavage patterns. Our new composite model identifies several critical structural features that confer broad specificity and may be readily engineered into existing industrial enzymes. We demonstrate that GH5_4 endoglucanases can have broad specificity without sacrificing high activity, making them a valuable addition to the biomass deconstruction toolset.

Enzyme systems of thermophilic anaerobic bacteria for lignocellulosic biomass conversion

Economic production of lignocellulose degrading enzymes for biofuel industries is of considerable interest to the biotechnology community. While these enzymes are widely distributed in fungi, their industrial production from other sources, particularly by thermophilic anaerobic bacteria (growth T_opt ≥ 60 °C), is an emerging field. Thermophilic anaerobic bacteria produce a large number of lignocellulolytic enzymes having unique structural features and employ different schemes for biomass degradation, which can be classified into four systems namely; 'free enzyme system', 'cell anchored enzymes', 'complex cellulosome system', and 'multifunctional multimodular enzyme system'. Such enzymes exhibit high specific activity and have a natural ability to withstand harsh bioprocessing conditions. However, achieving a higher production of these thermostable enzymes at current bioprocessing targets is challenging. In this review, the research opportunities for these distinct enzyme systems in the biofuel industry and the associated technological challenges are discussed. The current status of research findings is highlighted along with a detailed description of the categorization of the different enzyme production schemes. It is anticipated that high temperature-based bioprocessing will become an integral part of sustainable bioenergy production in the near future.

Improving the thermostability of a thermostable endoglucanase from Chaetomium thermophilum by engineering the conserved noncatalytic residue and N-glycosylation site

Endoglucanases provide an attractive avenue for the bioconversion of lignocellulosic materials into fermentable sugars to supply cellulosic feedstock for biofuels and other value-added chemicals. Thermostable endoglucanases with high catalytic activity are preferred in practical processes. To improve the thermostability and activity of the thermostable β-1,4-endoglucanase CTendo45 isolated from the thermophilic fungus Chaetomium thermophilum, structure-based rational design was performed by using site-directed mutagenesis. When inactivated mutation of the unique N-glycosylation sequon (N88-E89-T90) was implemented and the conserved Y173 residue was substituted with phenylalanine, a double mutant T90A/Y173F demonstrated enzymatic activity that dramatically increased 2.12- and 1.82-fold towards CMC-Na and β-D-glucan, respectively. Additionally, T90A/Y173F exhibited extraordinary heat endurance after 300 min of incubation at elevated temperatures. This study provides a valid approach to the improvement of enzyme redesign protocols and the properties of this endoglucanase mutant distinguish it as an excellent candidate enzyme for industrial biomass conversion.

Characterization of a Cu2+, SDS, alcohol and glucose tolerant GH1 β-glucosidase from Bacillus sp. CGMCC 1.16541

A β-glucosidase gene (bsbgl1a) from Bacillus sp. CGMCC 1.16541 was expressed in Escherichia coli BL21 and subsequently characterized. The amino acid sequence shared 83.64% identity with β-glucosidase (WP_066390903.1) from Fictibacillus phosphorivorans. The recombinant β-glucosidase (BsBgl1A) had a molecular weight of 52.2 kDa and could hydrolyze cellobiose, cellotriose, cellotetrose, p-nitrophenyl-β-D-glucopyranoside (pNPG), and p-nitrophenyl-β-D-xylopyranoside (pNPX). Optimal activity for BsBgl1A was recorded at 45 °C with a pH between 5.6 and 7.6, and 100% of its activity was maintained after a 24 h incubation between pH 4 and 9. Kinetic characterization revealed an enzymatic turnover (Kcat) of 616 ± 2 s^-1 (with cellobiose) and 3.5 ± 0.1 s^-1 (with p-nitrophenyl-β-D-glucopyranoside). Interestingly, the recombinant enzyme showed cupric ion (Cu²⁺), sodium dodecyl sulfate (SDS) and alcohol tolerance at 10 mM for Cu²⁺ and 10% for both SDS and alcohol. Additionally, BsBgl1A had high tolerance for glucose (Ki = 2095 mM), which is an extremely desirable feature for industrial applications. Following the addition of BsBgl1A (0.05 mg/ml) to a commercial cellulase reaction system, glucose yields from sugarcane bagasse increased 100% after 1 day at 45 °C. This work identifies a Cu²⁺, SDS, alcohol, and glucose tolerant GH1 β-glucosidase with potential applications in the hydrolysis of cellulose for the bioenergy industry.

Analysis of two Mexican Pectobacterium brasiliense strains reveals an inverted relationship between c-di-GMP levels with exopolysaccharide production and swarming motility

Pectobacterium is a diverse genus of phytopathogenic species from soil and water that cause infection either to restricted or multiple plant hosts. Phylogenetic analysis and metabolic fingerprinting of large numbers of genomes have expanded classification of Pectobacterium members. Pectobacterium brasiliense sp. nov has been elevated to the species level having detached from P. carotovorum. Here we present two P. brasiliense strains BF20 and BF45 isolated in Mexico from Opuntia and tobacco, respectively, which cluster into two different groups in whole genome comparisons with other Pectobacterium. We found that BF20 and BF45 strains are phenotypically different as BF45 showed more severe and rapid symptoms in comparison to BF20 in the host models celery and broccoli. Both strains produced similar levels of the main autoinducers, but BF45 shows an additional low abundant autoinducer compared to strain BF20. The two strains had different levels of c-di-GMP, which regulates the transition from motile to sessile lifestyle. In contrast to BF45, BF20 had the highest levels of c-di-GMP, was more motile (swarming), non-flocculant and less proficient in biofilm formation and exopolysaccharide production. Genomic comparisons revealed that differences in c-di-GMP accumulation and perhaps the associated phenotypes might be due to unique c-di-GMP metabolic genes in these two strains. Our results improve our understanding of the associations between phenotype and genotype and how this has shaped the physiology of Pectobacterium strains.

Identification and Characterization of a Novel Hyperthermostable Bifunctional Cellobiohydrolase- Xylanase Enzyme for Synergistic Effect With Commercial Cellulase on Pretreated Wheat Straw Degradation

The novel cellobiohydrolase gene ctcel7 was identified from Chaetomium thermophilum, and its recombinant protein CtCel7, a member of glycoside hydrolase family 7, was heterologously expressed in Pichia pastoris and biochemically characterized. Compared with commercial hydrolases, purified CtCel7 exhibited superior bifunctional cellobiohydrolase and xylanase activities against microcrystalline cellulose and xylan, respectively, under optimal conditions of 60°C and pH 4.0. Moreover, CtCel7 displayed remarkable thermostability with over 90% residual activity after heat (60°C) treatment for 180 min. CtCel7 was insensitive to most detected cations and reagents and preferentially cleaved the β-1,4-glycosidic bond to generate oligosaccharides through the continuous saccharification of lignocellulosic substrates, which are crucial for various practical applications. Notably, the hydrolysis effect of a commercial cellulase cocktail on pretreated wheat straw was substantively improved by its combination with CtCel7. Taken together, these excellent properties distinguish CtCel7 as a robust candidate for the biotechnological production of biofuels and biobased chemicals.

Cloning and characterization of the β-xylosidase from Dictyoglomus turgidum for high efficient biotransformation of 10-deacetyl-7-xylosltaxol

With the aim of finding an extracellular biocatalyst that can efficiently remove the C-7 xylose group from 10-deacetyl-7-xylosltaxol, a Dictyoglomus turgidum β-xylosidase was cloned and expressed in Escherichia coli BL21 (DE3). The molecular mass of purified Dt-Xyl3 was approximately 84 kDa. The recombinant Dt-Xyl3 was most active at pH 5.0 and 75 °C, retaining 88% activity at 65 °C for 1 h, and displaying excellent stability over pH 4.0-7.5 for 24 h. In terms of kinetic parameters, the K_m and V_max values for pNPX were 0.8316 mM and 5.0178 μmol/mL·min, respectively. Moreover, Dt-Xyl3 was activated by Mn²⁺ and Ba²⁺ and inhibited by Cu²⁺, Ni⁺ and Al³⁺. In particular, it displayed high tolerance to salts with 60.8% activity in 20% (w/v) NaCl. Ethanol and methanol at 5-15% showed little effect on the enzymatic activity. Dt-Xyl3 demonstrated multifunctional activities followed by pNPX, pNPAraf and pNPG and had a high selectivity for cleaving the outer xylose moieties of 10-deacetyl-7-xylosltaxol with K_cat/K_m 110.87 s^-1/mM, which produced 10-deacetyl-taxol to semi-synthesize paclitaxel. Under the optimized conditions (60 °C, pH 4.5, enzyme dosage of 0.5 U/mL), 1 g of 10-deacetyl-7-xylosltaxol was transformed to its corresponding aglycone 10-deacetyl-taxol within 30 min, with a molar conversion of 98%. This is the first report that Dictyoglomus turgidum can produce extracellular GH3 β-xylosidase with highly specific activity for 10-deacetyl-7-xylosltaxol biotransformation, thus leading to the application of β-xylosidase Dt-Xyl3 as a biocatalyst in biopharmaceutics.

Leloir Glycosyltransferases in Applied Biocatalysis: A Multidisciplinary Approach

Enzymes are nature’s catalyst of choice for the highly selective and efficient coupling of carbohydrates. Enzymatic sugar coupling is a competitive technology for industrial glycosylation reactions, since chemical synthetic routes require extensive use of laborious protection group manipulations and often lack regio- and stereoselectivity. The application of Leloir glycosyltransferases has received considerable attention in recent years and offers excellent control over the reactivity and selectivity of glycosylation reactions with unprotected carbohydrates, paving the way for previously inaccessible synthetic routes. The development of nucleotide recycling cascades has allowed for the efficient production and reuse of nucleotide sugar donors in robust one-pot multi-enzyme glycosylation cascades. In this way, large glycans and glycoconjugates with complex stereochemistry can be constructed. With recent advances, LeLoir glycosyltransferases are close to being applied industrially in multi-enzyme, programmable cascade glycosylations.

Effect of Lactobacillus plantarum expressing multifunctional glycoside hydrolases on the characteristics of alfalfa silage

For the first time, Lactobacillus plantarum strains carrying heterologous genes encoding multifunctional glycoside hydrolases were constructed and used as additives for alfalfa silage. The chemical characteristics, nonstructural carbohydrate composition, and fermentation quality of alfalfa silage were examined. The supernatant of L. plantarum expressing CbXyn10C and Bgxg1 (LP11AG) showed activities on xylan, Avicel, and carboxymethylcellulose (CMC), while the supernatant of the wild-type L. plantarum showed no activity. When LP11AG was used as silage additive, the water-soluble carbohydrate content of alfalfa silage increased by 72%, 55%, and 155% compared with control when the silage was stored at 20 °C, 30 °C, and 40 °C, respectively. With LP11AG being used as an additive for the alfalfa silage stored at 20 °C, the hemicellulose, cellulose, and acid detergent ligninin (ADL) contents decreased by 17%, 6%, and 14% compared with the control (p < 0.05), respectively. Compared with the corresponding original contents, the contents of glucose, arabinose, galactose, and fructose detected in silage treated with LP11AG after 45 days of ensiling increased by 55%, 1494%, 68%, and 5% , respectively, when stored at 40 °C. Raffinose and stachyose, originally present in alfalfa, disappeared after ensiling. In conclusion, our results suggest that LP11AG provides a substantial benefit as a silage additive.

Extent and Origins of Functional Diversity in a Subfamily of Glycoside Hydrolases

Some glycoside hydrolases have broad specificity for hydrolysis of glycosidic bonds, potentially increasing their functional utility and flexibility in physiological and industrial applications. To deepen the understanding of the structural and evolutionary driving forces underlying specificity patterns in glycoside hydrolase family 5, we quantitatively screened the activity of the catalytic core domains from subfamily 4 (GH5_4) and closely related enzymes on four substrates: lichenan, xylan, mannan, and xyloglucan. Phylogenetic analysis revealed that GH5_4 consists of three major clades, and one of these clades, referred to here as clade 3, displayed average specific activities of 4.2 and 1.2 U/mg on lichenan and xylan, approximately 1 order of magnitude larger than the average for active enzymes in clades 1 and 2. Enzymes in clade 3 also more consistently met assay detection thresholds for reaction with all four substrates. We also identified a subfamily-wide positive correlation between lichenase and xylanase activities, as well as a weaker relationship between lichenase and xyloglucanase. To connect these results to structural features, we used the structure of CelE from Hungateiclostridium thermocellum (PDB 4IM4) as an example clade 3 enzyme with activities on all four substrates. Comparison of the sequence and structure of this enzyme with others throughout GH5_4 and neighboring subfamilies reveals at least two residues (H149 and W203) that are linked to strong activity across the substrates. Placing GH5_4 in context with other related subfamilies, we highlight several possibilities for the ongoing evolutionary specialization of GH5_4 enzymes.

The genes of the sulphoquinovose catabolism in Escherichia coli are also associated with a previously unknown pathway of lactose degradation

Comparative genomics analysis of conserved gene cassettes demonstrated resemblance between a recently described cassette of genes involved in sulphoquinovose degradation in Escherichia coli K-12 MG1655 and a Bacilli cassette linked with lactose degradation. Six genes from both cassettes had similar functions related to carbohydrate metabolism, namely, hydrolase, aldolase, kinase, isomerase, transporter, and transcription factor. The Escherichia coli sulphoglycolysis cassette was thus predicted to be associated with lactose degradation. This prediction was confirmed experimentally: expression of genes coding for aldolase (yihT), isomerase (yihS), and kinase (yihV) was dramatically increased during growth on lactose. These genes were previously shown to be activated during growth on sulphoquinovose, so our observation may indicate multi-functional capabilities of the respective proteins. Transcription starts for yihT, yihV and yihW were mapped in silico, in vitro and in vivo. Out of three promoters for yihT, one was active only during growth on lactose. We further showed that switches in yihT transcription are controlled by YihW, a DeoR-family transcription factor in the Escherichia coli cassette. YihW acted as a carbon source-dependent dual regulator involved in sustaining the baseline growth in the absence of lac-operon, with function either complementary, or opposite to a global regulator of carbohydrate metabolism, cAMP-CRP.

A novel bifunctional acetyl xylan esterase/arabinofuranosidase from Penicillium chrysogenum P33 enhances enzymatic hydrolysis of lignocellulose

BACKGROUND

Xylan, the major constituent of hemicellulose, is composed of β-(1,4)-linked xylopyranosyl units that for the backbone, with side chains formed by other chemical moieties such as arabinose, galactose, mannose, ferulic acid and acetyl groups. Acetyl xylan esterases and α-L-arabinofuranosidases are two important accessory enzymes that remove side chain residues from xylan backbones and may act in synergy with other xylanolytic enzymes. Compared with enzymes possessing a single catalytic activity, multifunctional enzymes can achieve lignocellulosic biomass hydrolysis using a less complex mixture of enzymes.

RESULTS

Here, we cloned an acetyl xylan esterase (PcAxe) from Penicillium chrysogenum P33 and expressed it in Pichia pastoris GS115. The optimal pH and temperature of the recombinant PcAxe (rPcAxe) for 4-nitrophenyl acetate were 7.0 and 40 °C, respectively. rPcAxe is stable across a broad pH range, retaining 100% enzyme activity om pH 6-9 after a 1 h incubation. The enzyme tolerates the presence of a wide range of metal ions. Sequence alignment revealed a GH62 domain exhibiting α-L-arabinofuranosidase activity with pH and temperature optima of pH 7.0 and 50 °C, in addition to the expected esterase domain. rPcAxe displayed significant synergy with a recombinant xylanase, with a degree of synergy of 1.35 for the hydrolysis of delignified corn stover. Release of glucose was increased by 51% from delignified corn stover when 2 mg of a commercial cellulase was replaced by an equivalent amount of rPcAxe, indicating superior hydrolytic efficiency.

CONCLUSIONS

The novel bifunctional enzyme PcAxe was identified in P. chrysogenum P33. rPcAxe includes a carbohydrate esterase domain and a glycosyl hydrolase family 62 domain. This is the first detailed report on a novel bifunctional enzyme possessing acetyl xylan esterase and α-L-arabinofuranosidase activities. These findings expand our current knowledge of glycoside hydrolases and pave the way for the discovery of similar novel enzymes.

Transglycosylation, a new role for multifunctional cellulase in overcoming product inhibition during the cellulose hydrolysis

Cellulase mainly consisting of exo-glucanase, endo-glucanase and β-glucosidase, was considered as the most important biocatalyst for bioconversion of ethanol and other biofuels, feedstuffs and pharmaceuticals. Hydrolysis product inhibition, especially of glucose inhibition, is one of the critical difficulty awaiting to be overcome during cellulose bioconversion. Recently, several studies showed that some multifunctional cellulases (e.g., Umcel9y-1, Td2F2 and CoGH1A) could eliminate or relieve the product inhibition through transglycosylation actions during the cellulose hydrolysis. Transglycosylation confers multifunctional cellulases insensitive character to the end products (glucose and/or cellobiose), and provides a potential access in overcoming the inhibition of biofuels conversion. Moreover, transglycosylation harboring cellulases are also attracted as substitute of glycosyltransferase in synthesis of functional foods, nutraceuticals, or pharmaceuticals. Here, several interested transglycosylation harboring cellulases were summarized and assessed for the potential values in bioengineering application.