Xylan extraction from pretreated sugarcane bagasse using alkaline and enzymatic approaches

Antitumor activity of Polygonatum sibiricum polysaccharides

Cancer is a global public health problem. Natural polysaccharides have been shown to enhance the effectiveness of cancer treatments. Polygonatum sibiricum (PS) has been used for millennia to treat diverse diseases. PS comprises numerous active constituents, including saponins, peptides, volatile oils, polysaccharides, and lectins. Many studies have highlighted the crucial role of polysaccharides in PS. Modern studies have shown that Polygonatum sibiricum polysaccharide (PSP) exhibits diverse pharmacological activities, including immunomodulatory, antitumor, antioxidant, and anti-aging effects. However, further study of the antitumor mechanisms is difficult because the activities of PSP are closely associated with its complex structural features and the different molecular weights of its components. Therefore, this review focuses on the research background and the extraction and purification of PSP. Studies related to the mechanism of the antitumor effects of PSP constituents of different molecular weights are also summarized, and perspectives on PSP research are presented.

The green novel approach in hydrolysis of pistachio shell into xylose by microwave-assisted high-pressure CO2 /H2 O

BACKGROUND

Pistachio shell is a valuable lignocellulosic biomass because almost 90% of its hemicellulose fraction is xylan, which can be converted into high value-added compounds such as xylooligosaccarides, xylose, xylitol and furfural. The present study represents a green and novel approach to produce xylose from lignocellulosic biomass. Microwave-assisted high-pressure CO2 /H2 O hydrolysis (MW-HPCO2 ) comprising a combination never previously used was performed to produce xylose from pistachio shell.

RESULTS

Response surface methodology with a Box-Behnken design was implemented to optimize microwave-assisted high-pressure CO2 /H2 O hydrolysis (MW-HPCO2 ). The effect of temperature, time and liquid-to-solid ratio was studied in the ranges of 180-210 °C, 10-30 min and 5-30 mL g-1 , respectively. A maximum xylose yield of 61.39% and minimum degradation compounds (5-hydroxymethyl furfural and furfural) of 11.07% were attained under reaction conditions of 190 °C, 30 min and 18 mL g-1 .

CONCLUSION

The results showed that hydrolysis temperature, time and liquid-to-solid ratio had a strong influence on the xylose yield, as well as on the formation of degradation compounds. MW-HPCO2 significantly increased accessibility to cellulose-derived products in the subsequent enzymatic hydrolysis. The results of the present study reveal that MW-HPCO2 can be a promising green technique for the hydrolysis of lignocellulosic biomass. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Xylooligosaccharides produced from sugarcane leaf arabinoxylan using xylanase from Aureobasidium pullulans NRRL 58523 and its prebiotic activity toward Lactobacillus spp

In an attempt to enhance the value of sugarcane leaf, xylan was extracted and used for xylooligosaccharide (XO) production via enzymatic hydrolysis using xylanase from the black yeast Aureobasidium pullulans. The xylan was extracted from sugarcane leaf using alkali extraction according to the response surface methodology. The highest xylan yield (99.42 ± 4.05 % recovery) was obtained using 14.32 % (w/v) NaOH, 13.25:1 liquid: solid ratio, at 121 °C and 15 lb.in2 for 32 min. Sugar composition and FTIR spectrum analyses confirmed its structure as arabinoxylan. The extracted arabinoxylan had a relatively high molecular weight compared to previous studies. Crude endoxylanase from A. pullulans NRRL 58523 was selected for enzymatic hydrolysis of the xylan. The enzyme hydrolyzed well at 50 °C, pH 4.0 and was relatively stable under this condition (87.38 ± 1.26 % of the activity remained after 60 h). XOs, especially xylobiose and xylotriose, were obtained at the maximum yield of 237.51 ± 17.69 mg/g xylan via endoxylanase hydrolysis under the optimum conditions (50 °C, pH 4.0, 65.31 U/g xylan, 53 h). XOs exhibited species-specific prebiotic activity toward three strains of Lactobacillus spp. but not toward Bifidobacterium spp.

Sugarcane Straw as a Source of Arabinoxylans: Optimization and Economic Viability of a Two-Step Alkaline Extraction

Sugarcane processing produces a significant amount of byproducts in the form of straw and bagasse, which are rich in cellulose, hemicellulose, and lignin. This work aims to provide a valorization approach to sugarcane straw by optimizing a two-step alkaline extraction of arabinoxylans by a response surface methodology to evaluate a potential industrial-scale production. Sugarcane straws were delignified using an alkaline-sulfite pretreatment, followed by alkaline extraction and precipitation of arabinoxylan, a two-step process optimized using a response surface methodology. A KOH concentration of (2.93-17.1%) and temperature (18.8-61.2 °C) were chosen as independent variables, and the arabinoxylan yield (%) as a response variable. The model application shows that KOH concentration, temperature, and the interaction between both independent variables are significant in extracting arabinoxylans from straw. The best-performing condition was further characterized by FTIR, DSC, and chemical and molecular weight evaluation. The straws arabinoxylans presented high purities levels, ca. 69.93%, and an average molecular weight of 231 kDa. The overall estimated production cost of arabinoxylan from straw was 0.239 €/g arabinoxylan. This work demonstrates a two-step alkaline extraction of the arabinoxylans method, as well as their chemical characterization and economic viability analysis, that can be used as a model for industrial scale-up production.

Production of Designer Xylose-Acetic Acid Enriched Hydrolysate from Bioenergy Sorghum, Oilcane, and Energycane Bagasses

Xylan accounts for up to 40% of the structural carbohydrates in lignocellulosic feedstocks. Along with xylan, acetic acid in sources of hemicellulose can be recovered and marketed as a commodity chemical. Through vibrant bioprocessing innovations, converting xylose and acetic acid into high-value bioproducts via microbial cultures improves the feasibility of lignocellulosic biorefineries. Enzymatic hydrolysis using xylanase supplemented with acetylxylan esterase (AXE) was applied to prepare xylose-acetic acid enriched hydrolysates from bioenergy sorghum, oilcane, or energycane using sequential hydrothermal-mechanical pretreatment. Various biomass solids contents (15 to 25%, w/v) and xylanase loadings (140 to 280 FXU/g biomass) were tested to maximize xylose and acetic acid titers. The xylose and acetic acid yields were significantly improved by supplementing with AXE. The optimal yields of xylose and acetic acid were 92.29% and 62.26% obtained from hydrolyzing energycane and oilcane at 25% and 15% w/v biomass solids using 280 FXU xylanase/g biomass and AXE, respectively.

Valorisation of wheat straw into paper with improved quality characteristics using ultrafiltered xylano-pectinolytic pulping approach

This study has been conducted to assess the pulpability of ultrafiltered pectinase and xylanase in pulping of wheat straw. Best biopulping conditions were achieved using 107 and 250 IU of pectinase and xylanase, respectively, per gram of wheat straw, 180 min of treatment period, one gram: 10 m1 material to liquor ratio, 8.5 pH and 55 °C temperature. Ultrafiltered enzymatic treatment improved the pulp yield (6.18%), brightness (17.83%), along with reduced rejections (61.01%) and kappa number (16.95%) as compared to chemically synthesized pulp. Biopulping of wheat straw saved 14% alkali dose, with nearly same optical properties, as obtained under 100% alkali dose. Bio-chemically pulped samples resulted an increase in breaking length, tear index, burst index, viscosity, double fold and Gurley porosity by 6.05%, 18.64%, 26.42%, 7.94%, 21.6% and 15.38%, respectively, in comparison to control pulp samples. Bleached-biopulped samples showed an improvement in breaking length, tear index, burst index, viscosity, double fold number, and Gurley porosity by 7.39%, 3.55%, 28.82%, 9.1%, 53.66%, and 30.95% respectively. Thus, biopulping of wheat straw with ultrafiltered enzymes lowers alkali consumption and also improves the paper quality. This is the first study reporting, eco-friendly biopulping, for producing better quality wheat straw pulp, using ultrafiltered enzymes.

Production of eco-friendly and better-quality sugarcane bagasse paper using crude xylanase and pectinase biopulping strategy

This research aimed to investigate the efficiency of crude xylanase-pectinase in pulping of sugarcane bagasse. Optimum biopulping was obtained, using xylanase-pectinase dose 200-60 IU/g, bagasse/liquid ratio 1:10 and 1.0% Tween 80 concentration at 55 °C temperature, pH 8.5 and period of treatment 180 min. Treatment of sugarcane bagasse samples with these enzymes generated pulp with lower rejections (58.76%), total solids (12.64%), kappa number (47.77%), higher screened pulp yield (10.66%), along with enhanced optical and physical properties, in comparison with a chemical pulp. Bagasse biopulping resulted in a 13% decrease in alkali dose to obtain the optical and physical properties similar to those achieved under the 100% alkali dose. The breaking length, burst factor, tear index, double fold, gurley porosity and viscosity were improved by 15.19, 37.64, 2.47, 37.77, 35 and 23.17%, respectively, after bleaching treatment of biopulped samples. Thus, enzymatic pulping is an eco-friendly environmentally sustainable approach, since it reduces the use of pulping chemicals and simultaneously improves the paper quality. This is the first report, showing pulping of sugarcane bagasse, with crude xylanase-pectinase, produced by an isolate.

Quantitative Bottom-Up Glycomic Analysis of Polysaccharides in Food Matrices Using Liquid Chromatography-Tandem Mass Spectrometry

Carbohydrates are the most abundant biomolecules in nature, and specifically, polysaccharides are present in almost all plants and fungi. Due to their compositional diversity, polysaccharide analysis remains challenging. Compared to other biomolecules, high-throughput analysis for carbohydrates has yet to be developed. To address this gap in analytical science, we have developed a multiplexed, high-throughput, and quantitative approach for polysaccharide analysis in foods. Specifically, polysaccharides were depolymerized using a nonenzymatic chemical digestion process followed by oligosaccharide fingerprinting using high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (HPLC-QTOF-MS). Both label-free relative quantitation and absolute quantitation were done based on the abundances of oligosaccharides produced. Method validation included evaluating recovery for a range of polysaccharide standards and a breakfast cereal standard reference material. Nine polysaccharides (starch, cellulose, β-glucan, mannan, galactan, arabinan, xylan, xyloglucan, chitin) were successfully quantitated with sufficient accuracy (5-25% bias) and high reproducibility (2-15% CV). Additionally, the method was used to identify and quantitate polysaccharides from a diverse sample set of food samples. Absolute concentrations of nine polysaccharides from apples and onions were obtained using an external calibration curve, where varietal differences were observed in some of the samples. The methodology developed in this study will provide complementary polysaccharide-level information to deepen our understanding of the interactions of dietary polysaccharides, gut microbial community, and human health.

Xylan, Xylooligosaccharides, and Aromatic Structures With Antioxidant Activity Released by Xylanase Treatment of Alkaline-Sulfite–Pretreated Sugarcane Bagasse

Xylanase enzymes are useful to fractionate plant biomass, producing xylan, xylooligosaccharides (XOS), and antioxidant-derived XOS. In a biorefinery, pretreated biomass can be digested with xylanase prior to cellulose saccharification, enhancing the product portfolio in the process. With this vision, this study highlighted a wide range of new products attainable from alkaline-sulfite–pretreated sugarcane bagasse by treatments with endo-xylanase under controlled conditions. The developed process provided a crude extract corresponding to 29.7% (w/w) of pretreated sugarcane bagasse. The crude extract included a relatively polymeric glucuronoarabinoxylan fraction, DP2-DP6 xylooligosaccharides, and aromatic compounds. The enzymatically produced extract was fractionated with increasing ethanol concentrations [up to 90% (v/v)], providing precipitation of varied polymeric xylan fractions (48% (w/w) of the crude extract) with average molar masses ranging from 28 kDa to 3.6 kDa. The fraction soluble in 90% ethanol was subjected to adsorption on 4% (w/v) activated charcoal and eluted with an ethanol gradient from 10% to 70% (v/v), thus providing xylooligosaccharides and aromatic fractions. Most of the xylooligosaccharides (74% of the eluted sugars) were washed out in 10%–30% ethanol. DP2 and DP3 structures predominated in the 10% ethanol fraction, while DP5 structures were significantly enriched in the 30% ethanol fraction. Higher ethanol concentrations desorbed xylooligosaccharides associated with higher amounts of aromatic compounds. Total aromatics, phenolic structures, and p-hydroxycinnamates predominated in the fractions desorbed with 60% and 70% ethanol. The antioxidant activity of produced fractions correlated with their phenolic contents. Compiled results indicate that a wide variety of products can be prepared from pretreated biomass using xylanase-aided extraction procedures. Recovered fractions presented different features and specific application prospects. Beyond polymeric xylan with low lignin contamination, xylooligosaccharides or even lignin-carbohydrate complexes with antioxidant activity can be included in the biorefinery portfolio based on the currently developed fractionation studies.

Polysaccharides as wall materials in spray-dried microencapsulation of bioactive compounds: Physicochemical properties and characterization

Natural bioactive compounds (BCs) are types of chemicals found in plants and certain foods that promote good health, however they are sensitive to processing and environmental conditions. Microencapsulation by spray drying is a widely used and cost-effective approach to create a coating layer to surround and protect BCs and control their release, enabling the production of high functional products/ingredients with extended shelf life. In this process, wall materials determine protection efficiency, and physical properties, bioavailability, and storage stability of microencapsulated products. Therefore, an understanding of physicochemical properties of wall materials is essential for the successful and effective spray-dried microencapsulation process. Typically, polysaccharide-based wall materials are generated from more sustainable sources and have a wider range of physicochemical properties and applications compared to their protein-based counterparts. In this review, we highlight the essential physicochemical properties of polysaccharide-based wall materials for spray-dried microencapsulation of BCs including solubility, thermal stability, and emulsifying properties, rheological and film forming properties. We provide further insight into possibilities for the chemical structure modification of native wall materials and their controlled release behaviors. Finally, we summarize the most recent studies involving polysaccharide biopolymers as wall materials and/or emulsifiers in spray-dried microencapsulation of BCs.

Effect of decomposing oil palm trunk fibers on plant growth and soil microbial community composition

Oil palm trunks (OPT) are logged for replantation and the fiber residues are disposed of into the palm plantation area. The fiber residues are expected to increase soil fertility through recycling of carbon and minerals via fiber decomposition. This study investigated the effects of OPT fiber disposal and other lignocellulosic biomass on plant growth and microbial diversity in the soil environment. Four treatment plots were tested: (A) soil+OPT fiber (1:20), (B) soil+sugarcane bagasse (1:20), (C) soil+cellulose powder (1:20), and (D) unamended soil as a negative control. Low plant height, decreased chlorophyll content, and low biomass was observed in corn grown on soil mixed with OPT fiber, cellulose, and sugarcane bagasse, when compared with those of the control. The plants grown with OPT fiber were deficient in total nitrogen and magnesium when compared with those without fiber amendment, which suggested that nitrogen and minerals in soil might be taken up by changing microflora because of the OPT fibers presence. To confirm differences in the soil microflora, metagenomics analysis was performed on untreated soil and soil from each lignocellulose treatment. The microflora of soils mixed with OPT fiber, cellulose and sugarcane bagasse revealed substantial increases in bacteria such as families Cytophagaceae and Oscillospiraceae, and two major fungal genera, Trichoderma and Trichocladium, that are involved in lignocellulose degradation. OPT fiber resulted in a drastic increase in the ratios and amounts of Trichocladium in the soil when compared with those of cellulose and sugarcane bagasse. These results indicate that unregulated disposal of OPT fiber into plantation areas could result in nutrient loss from soil by increasing the abundance of microorganisms involved in lignocellulose decomposition.

Sugarcane bagasse: a biomass sufficiently applied for improving global energy, environment and economic sustainability

Sugarcane (Saccharum officinarum) bagasse (SCB) is a biomass of agricultural waste obtained from sugarcane processing that has been found in abundance globally. Due to its abundance in nature, researchers have been harnessing this biomass for numerous applications such as in energy and environmental sustainability. However, before it could be optimally utilised, it has to be pre-treated using available methods. Different pre-treatment methods were reviewed for SCB, both alkaline and alkali-acid process reveal efficient and successful approaches for obtaining higher glucose production from hydrolysis. Procedures for hydrolysis were evaluated, and results indicate that pre-treated SCB was susceptible to acid and enzymatic hydrolysis as > 80% glucose yield was obtained in both cases. The SCB could achieve a bio-ethanol (a biofuel) yield of > 0.2 g/g at optimal conditions and xylitol (a bio-product) yield at > 0.4 g/g in most cases. Thermochemical processing of SCB also gave excellent biofuel yields. The plethora of products obtained in this regard have been catalogued and elucidated extensively. As found in this study, the SCB could be used in diverse applications such as adsorbent, ion exchange resin, briquettes, ceramics, concrete, cement and polymer composites. Consequently, the SCB is a biomass with great potential to meet global energy demand and encourage environmental sustainability.

Endo-xylanases from Cohnella sp. AR92 aimed at xylan and arabinoxylan conversion into value-added products

The genus Cohnella belongs to a group of Gram-positive endospore-forming bacteria within the Paenibacillaceae family. Although most species were described as xylanolytic bacteria, the literature still lacks some key information regarding their repertoire of xylan-degrading enzymes. The whole genome sequence of an isolated xylan-degrading bacterium Cohnella sp. strain AR92 was found to contain five genes encoding putative endo-1,4-β-xylanases, of which four were cloned, expressed, and characterized to better understand the contribution of the individual endo-xylanases to the overall xylanolytic properties of strain AR92. Three of the enzymes, CoXyn10A, CoXyn10C, and CoXyn11A, were shown to be effective at hydrolyzing xylans-derived from agro-industrial, producing oligosaccharides with substrate conversion values of 32.5%, 24.7%, and 10.6%, respectively, using sugarcane bagasse glucuronoarabinoxylan and of 29.9%, 19.1%, and 8.0%, respectively, using wheat bran-derived arabinoxylan. The main reaction products from GH10 enzymes were xylobiose and xylotriose, whereas CoXyn11A produced mostly xylooligosaccharides (XOS) with 2 to 5 units of xylose, often substituted, resulting in potentially prebiotic arabinoxylooligosaccharides (AXOS). The endo-xylanases assay displayed operational features (temperature optima from 49.9 to 50.4 °C and pH optima from 6.01 to 6.31) fitting simultaneous xylan utilization. Homology modeling confirmed the typical folds of the GH10 and GH11 enzymes, substrate docking studies allowed the prediction of subsites (- 2 to + 1 in GH10 and - 3 to + 1 in GH11) and identification of residues involved in ligand interactions, supporting the experimental data. Overall, the Cohnella sp. AR92 endo-xylanases presented significant potential for enzymatic conversion of agro-industrial by-products into high-value products.Key points• Cohnella sp. AR92 genome encoded five potential endo-xylanases.• Cohnella sp. AR92 enzymes produced xylooligosaccharides from xylan, with high yields.• GH10 enzymes from Cohnella sp. AR92 are responsible for the production of X2 and X3 oligosaccharides.• GH11 from Cohnella sp. AR92 contributes to the overall xylan degradation by producing substituted oligosaccharides.

Effect of Dietary Sugarcane Bagasse Supplementation on Growth Performance, Immune Response, and Immune and Antioxidant-Related Gene Expressions of Nile Tilapia (Oreochromis niloticus) Cultured under Biofloc System

Simple Summary

Supplementation of agriculture by-product as functional feed additives in combination with biofloc technology (a sustainable and environmentally friendly technology) has recently gained much attention in aquaculture. In the present study, sugarcane bagasse powder can possibly be applied as a feed additive to improve growth performance, immune response, and immune and antioxidant-related gene expression.

Abstract

We investigated, herein, the effects of dietary inclusion of sugarcane bagasse powder (SB) on Nile tilapia development, mucosal and serum immunities, and relative immune and antioxidant genes. Fish (15.12 ± 0.04 g) were provided a basal diet (SB0) or basal diet incorporated with SB at 10 (SB10), 20 (SB20), 40 (SB40), or 80 (SB80) g kg⁻¹ for 8 weeks. Our results demonstrated that the dietary incorporation of sugarcane bagasse powder (SB) at 20 and 40 g kg⁻¹ significantly ameliorated FW, WG, and SGR as opposed to fish fed basal, SB10, and SB80 diets. However, no significant changes in FCR and survivability were observed between the SB supplemented diets and the control (basal diet). The mucosal immunity exhibited significantly higher SMLA and SMPA activities (p < 0.005) in fish treated with SB diets after eight weeks. The highest SMLA and SMPA levels were recorded in fish fed SB80 followed by SB20, SB40, and SB10, respectively. For serum immunity, fish fed SB incorporated diets significantly ameliorated SL and RB levels (p < 0.05) compared with the control. However, SP was not affected by the inclusion of SB in any diet throughout the experiment. The expression of IL1, IL8, LBP, GSTa, GPX, and GSR genes in the fish liver was significantly increased in fish fed the SB20 and SB10 diets relative to the basal diet fed fish (p < 0.05); whereas only the IL8, LBP, and GPX genes in the intestines were substantially augmented via the SB20 and SB80 diets (p < 0.05). IL1 and GSR were not influenced by the SB incorporated diets (p > 0.05). In summary, sugarcane bagasse powder (SB) may be applied as a feed additive to improve growth performance, immune response, and immune and antioxidant-related gene expression in Nile tilapia.

Extraction of sugarcane bagasse arabinoxylan, integrated with enzymatic production of xylo-oligosaccharides and separation of cellulose

Sugarcane processing roughly generates 54 million tonnes sugarcane bagasse (SCB)/year, making SCB an important material for upgrading to value-added molecules. In this study, an integrated scheme was developed for separating xylan, lignin and cellulose, followed by production of xylo-oligosaccharides (XOS) from SCB. Xylan extraction conditions were screened in: (1) single extractions in NaOH (0.25, 0.5, or 1 M), 121 °C (1 bar), 30 and 60 min; (2) 3 × repeated extraction cycles in NaOH (1 or 2 M), 121 °C (1 bar), 30 and 60 min or (3) pressurized liquid extractions (PLE), 100 bar, at low alkalinity (0-0.1 M NaOH) in the time and temperature range 10-30 min and 50-150 °C. Higher concentration of alkali (2 M NaOH) increased the xylan yield and resulted in higher apparent molecular weight of the xylan polymer (212 kDa using 1 and 2 M NaOH, vs 47 kDa using 0.5 M NaOH), but decreased the substituent sugar content. Repeated extraction at 2 M NaOH, 121 °C, 60 min solubilized both xylan (85.6% of the SCB xylan), and lignin (84.1% of the lignin), and left cellulose of high purity (95.8%) in the residuals. Solubilized xylan was separated from lignin by precipitation, and a polymer with β-1,4-linked xylose backbone substituted by arabinose and glucuronic acids was confirmed by FT-IR and monosaccharide analysis. XOS yield in subsequent hydrolysis by endo-xylanases (from glycoside hydrolase family 10 or 11) was dependent on extraction conditions, and was highest using xylan extracted by 0.5 M NaOH, (42.3%, using Xyn10A from Bacillus halodurans), with xylobiose and xylotriose as main products. The present study shows successful separation of SCB xylan, lignin, and cellulose. High concentration of alkali, resulted in xylan with lower degree of substitution (especially reduced arabinosylation), while high pressure (using PLE), released more lignin than xylan. Enzymatic hydrolysis was more efficient using xylan extracted at lower alkaline strength and less efficient using xylan obtained by PLE and 2 M NaOH, which may be a consequence of polymer aggregation, via remaining lignin interactions.

Extraction and characterization of xylan from sugarcane tops as a potential commercial substrate

Xylan is the major hemicellulose present in sugarcane stem secondary cell walls. Xylan is composed of xylose backbone with a high degree of substitutions, which affects its properties. In the present study, the xylan from sugarcane tops (SCT) was extracted and characterized. Compositional analysis of xylan extracted from SCT (SCTx) displayed the presence of 74% of d-xylose residues, 16% of d-glucuronic acid residues and 10% of l-arabinose. High performance size exclusion chromatographic analysis of SCTx displayed a single peak corresponding to a molecular mass of ∼57 kDa. The Fourier transform infrared spectroscopic analysis of SCTx displayed the peaks corresponding to those obtained from commercial xylan. FESEM analysis of SCTx showed the granular and porous surface structure. Differential thermogravimetric analysis (DTG) of SCTx displayed two thermal degradation temperatures (T_d) of 228°C, due to breakdown of the side chains of glucuronic acid and arabinose and 275°C, due to breakdown of xylan back bone. The presence of arabinose and glucuronic acid as a side chains was confirmed by the DTG and thermogravimetric analysis. The CHNS analysis of SCTx showed the presence of only carbon and hydrogen supporting its purity. The recombinant xylanase (CtXyn11A) from Clostridium thermocellum displayed a specific activity of 1394 ± 51 U/mg with SCTx, which was higher than those with commercial xylans. The thin layer chromatography and electrospray ionization mass spectroscopy analyses of CtXyn11A hydrolysed SCTx contained a series of linear xylo-oligosaccharides ranging from degree of polymerization 2-6 and no substituted xylo-oligosaccharides because of the endolytic activity of enzyme. The extracted xylan from SCT can be used as an alternative commercial substrate and for oligo-saccharide production.

Recent Advancements in Biological Conversion of Industrial Hemp for Biofuel and Value-Added Products

Sustainable, economically feasible, and green resources for energy and chemical products have people’s attention due to global energy demand and environmental issues. Last several decades, diverse lignocellulosic biomass has been studied for the production of biofuels and biochemicals. Industrial hemp has great market potential with its versatile applications. With the increase of the hemp-related markets with hemp seed, hemp oil, and fiber, the importance of hemp biomass utilization has also been emphasized in recent studies. Biological conversions of industrial hemp into bioethanol and other biochemicals have been introduced to address the aforementioned energy and environmental challenges. Its high cellulose content and the increased production because of the demand for cannabidiol oil and hempseed products make it a promising future bioenergy and biochemical source. Effective valorization of the underutilized hemp biomass can also improve the cost-competitiveness of hemp products. This manuscript reviews recent biological conversion strategies for industrial hemp and its characteristics. Current understanding of the industrial hemp properties and applied conversion technologies are briefly summarized. In addition, challenges and future perspectives of the biological conversion with industrial hemp are discussed.

Combined pretreatment of sugarcane bagasse using alkali and ionic liquid to increase hemicellulose content and xylanase production

BACKGROUND

Lignin in sugarcane bagasse (SB) hinders its utilization by microorganism, therefore, pretreatment methods are employed to make fermentable components accessible to the microbes. Multivariate analysis of different chemical pretreatment methods can aid to select the most appropriate strategy to valorize a particular biomass.

RESULTS

Amongst methods tested, the pretreatment by using sodium hydroxide in combination with methyltrioctylammonium chloride, an ionic liquid, (NaOH+IL) was the most significant for xylanase production by Bacillus aestuarii UE25. Investigation of optimal levels of five significant variables by adopting Box-Behnken design (BBD) predicted 20 IU mL^- 1 of xylanase and experimentally, a titer of 17.77 IU mL^- 1 was obtained which indicated the validity of the model. The production kinetics showed that volumetric productivity of xylanase was much higher after 24 h (833.33 IU L^- 1 h^- 1) than after 48 h (567.08 IU L^- 1 h^- 1). The extracted xylan from SB induced more xylanase in the fermentation medium than pretreated SB or commercially purified xylan. Nuclear Magnetic Resonance, Fourier transform infrared spectroscopy and scanning electron microscopy of SB indicated removal of lignin and changes in the structure of SB after NaOH+IL pretreatment and fermentation.

CONCLUSION

Combined pretreatment of SB with alkali and methyltrioctylammonium chloride appeared better than other chemical methods for bacterial xylanase production and for the extraction of xylan form SB.

Enzyme-aided xylan extraction from alkaline-sulfite pretreated sugarcane bagasse and its incorporation onto eucalyptus kraft pulps

Hemicellulose-rich substrates produced in the lignocellulose biorefinery context can yield macromolecular xylan structures with assorted application in the chemical industry. Xylan presents natural affinity to cellulose and its incorporation onto fibers increases the physical processability of pulp; however, current studies diverge on how molar mass affects xylan interaction with cellulose. In the current work, xylans with varied structural characteristics were prepared from alkaline-sulfite pretreated sugarcane bagasse with aid of an alkaline-active xylanase and selective precipitations using different ethanol concentrations. Prepared xylan fractions, containing low levels of lignin contamination (4-9%) and molar masses ranging from 2.3 kDa to 34 kDa, were incorporated onto eucalyptus pulp fibers up to 4.7 g xylan/100 g pulp. The efficiency of xylan incorporation onto cellulosic fibers was dependent on the xylan structures, where low molar mass and low substitution degree favored high incorporation levels.

Spent Coffee Waste as a Potential Media Component for Xylanase Production and Potential Application in Juice Enrichment

In this study, spent coffee waste (SCW) was used as the sole carbon source for xylanase production in solid state fermentation mode using Aspergillus niger. A Box-Behnken design was constructed using three parameters viz. temperature, initial moisture content, and log number of spores to determine the optimal fermentation condition. The best fermentation conditions for xylanase production were found to be incubation at 30 °C with an initial moisture content of 70% and using an inoculum of 6.5 × 10⁶ spores/g of dry SCW. Furthermore, the design of experiments revealed that maintaining a medium composition of 0.2 g of yeast extract, 0.04 g of K₂HPO₄, and 0.03 g of MgSO₄ increased xylanase production. Under optimised solid-state fermentation conditions an enzyme activity of 6495.6 IU/g of dry SCW was recorded, which was approximately 1.39-fold higher than that of control (4649 IU/g of dry SCW). The efficacy of the purified xylanase as a juice enrichment agent for strawberry, blueberry, and raspberry pulp was tested.

Performance and structural comparison of hydrogels made from wheat bran arabinoxylan using enzymatic and coacervation methods as micro-and nano- encapsulation and delivery devices

This study evaluated the structural and performance differences between arabinoglucuronoxylan micro-hydrogels that were enzymatically produced from alkaline-extracted wheat bran arabinoglucuronoxylans using recombinant α-L-arabinofuranosidase (AbfB) that selectively removes arabinose side chains, and chemically through coacervation process, as delivery devices for bioactive substances. The encapsulations of model bioactive substance, gallic acid (GA), in the hydrogels, were done either in-situ or ex-situ to identify the most effective encapsulation and delivery method. The hydrogels particle size distribution, polydispersity index, GA encapsulation efficiency, retention and release of functional GA (based on antioxidant activity) were assessed. The hydrogels formed in both coacervation and enzymatic processes had particle size ranges of 469-678 nm, which classify them as micro-hydrogels. However, the latter were monodispersed with polydispersity index (PdI) < 0.4 compared to the former with PdI > 0.7. In addition, enzymatically produced hydrogels attained higher zeta potential (-8.8 mV) and retained and released GA with higher anti-oxidant capacity (91%) than chemically formed micro-hydrogels (zeta potential = - 3.3 mV and antioxidant capacity = 80%). However, GA encapsulation efficiencies (72% in-situ and 68% ex-situ) were higher in chemically formed micro-hydrogels than enzymatically produced micro-hydrogels (59% in-situ and 52% ex-situ). The in-situ encapsulated GA experienced less initial burst during sustained release of 8 h compared to ex-situ encapsulation. Overall, enzymatic modification process and in-situ encapsulation were the most effective methods for production of arabinoglucuronoxylan micro-hydrogels delivery devices and for encapsulation of the GA, respectively, because of maintaining functional GA upon release and having the potential to customize the structural and functional properties of the micro-hydrogels.

Microwave-assisted hydrothermal extraction of non-structural carbohydrates and hemicelluloses from tobacco biomass

Microwave-assisted hydrothermal extraction of non-structural carbohydrates and hemicelluloses from tobacco biomass was investigated. Non-structural carbohydrates extraction was optimized by an Optimal design. The maximum yields for the leaf and stem were 118.57 mg/g and 120.33 mg/g biomass, respectively. The extracted stem residue was further treated for hemicelluloses extraction. A temperature of 200 °C without holding was proved to be the most efficient condition to produce a hemicelluloses yield of 105.15 mg/g. GPC results showed that the Mw values of precipitated hemicelluloses decreased from 143.5 kDa to 13.25 kDa with increasing temperature and holding time, while the un-precipitated fraction were ranging from 11.83 to 4.88 kDa. Monosaccharide analysis revealed that hemicelluloses extracted at lower temperature are heterogeneous compositional type, including xylan, glucuronoxylan and xylanglucan, while the ratio of xylose increased significantly (up to 72.64%) with increasing temperature. The developed microwave-assisted hydrothermal extraction process opens new avenues for a sustainable tobacco-based biorefinery.

Purification and characterization of an endo-xylanase from Trichoderma sp., with xylobiose as the main product from xylan hydrolysis

Fungal endo-β-1,4-xylanases (endo-xylanases) can hydrolyze xylan into xylooligosaccharides (XOS), and have potential biotechnological applications for the exploitation of natural renewable polysaccharides. In the current study, we aimed to screen and characterize an efficient fungal endo-xylanase from 100 natural humus-rich soil samples collected in Guizhou Province, China, using extracted sugarcane bagasse xylan (SBX) as the sole carbon source. Initially, 182 fungal isolates producing xylanases were selected, among which Trichoderma sp. strain TP3-36 was identified as showing the highest xylanase activity of 295 U/mL with xylobiose (X2) as the main product when beechwood xylan was used as substrate. Subsequently, a glycoside hydrolase family 11 endo-xylanase, TXyn11A, was purified from strain TP3-36, and its optimal pH and temperature for activity against beechwood xylan were identified to be 5.0 and 55 °C, respectively. TXyn11A was stable across a broad pH range (3.0-10.0), and exhibited strict substrate specificity, including xylan from beechwood, wheat, rye, and sugarcane bagasse, with K_m and V_max values of 5 mg/mL and 1250 μmol/mg min, respectively, toward beechwood xylan. Intriguingly, the main product obtained from hydrolysis of beechwood xylan by TXyn11A was xylobiose, whereas SBX hydrolysis resulted in both X2 and xylotriose. Overall, these characteristics of the endo-xylanase TXyn11A indicate several potential industrial applications.

Extraction and Characterization of Hemicellulose from Eucalyptus By-product: Assessment of Enzymatic Hydrolysis to Produce Xylooligosaccharides

Eucalyptus wood is the primary source of fibers to produce paper and cellulose in South American countries. The major by-product generated in the cellulose industry is sawdust derived from chip wood production, which is designated as Eucalyptus by-product (EB). The xylooligosaccharides (XOS) are xylose-based oligomers with proven effects over maintenance and stimulation of beneficial human gut bacteria. This study reported the EB extraction and characterization along with an assessment of hemicellulose hydrolysis using commercial xylanases to produce XOS. Hemicellulose derived from extracted and NaClO₂ pretreated (HEEBPT) presented xylan content of 55%, which was similar to 58.5% found in commercial Birchwood hemicellulose (CBH). The enzymatic hydrolysis of HEEBPT and CBH presented 30% as maximum conversion of xylan into XOS without significant difference among the enzymatic extracts evaluated. The XOS production from EB was proven as a technically feasible alternative to recover a value-added product from hemicellulosic fraction generated in the cellulose industry. However, lignin removal with NaClO₂ from EB affects the feasibility of an industrial process because they generate toxic compounds in the pretreatment step. Thus, further studies with alternative reagents, such as ionic liquids, are required to asses selectively lignin removal from EB. Graphical Abstract.

The extracellular endo-β-1,4-xylanase with multidomain from the extreme thermophile Caldicellulosiruptor lactoaceticus is specific for insoluble xylan degradation

BACKGROUND

The extremely thermophilic bacterium Caldicellulosiruptor lactoaceticus can degrade and metabolize untreated lignocellulosic biomass containing xylan. The mechanism of the bacterium for degradation of insoluble xylan in untreated biomass has not been revealed.

RESULTS

In the present study, the only annotated extracellular endo-β-1,4-xylanase (Xyn10B) with multidomain structures in C. lactoaceticus genome was biochemically characterized. Xyn10B contains three N-terminal consecutive family 22 carbohydrate-binding modules (CBMs), one GH10 catalytic domain (CD), two family 9 CBMs and two S-layer homology (SLH) modules in the C-terminal. CBM22a shares 27.1% and 27.2% sequence homology with CBM22b and CBM22c, respectively. The sequence homology between two CBM9 s and two SLHs is 26.8% and 25.6%, respectively. To elucidate the effect of multiple domains on the enzymatic properties of Xyn10B, the truncated variants of which (Xyn10B-TM1: CBM22a-CBM22b-CBM22c-CD10; Xyn10B-TM2: CBM22c-CD10; Xyn10B-TM3: CBM22c-CD10-CBM9a; and Xyn10B-TM4: CD10-CBM9a) were separately reconstructed, recombinantly expressed and biochemically characterized. Enzymatic properties studies showed that the optimal temperature for all four Xyn10B truncations was 65 °C. Compared to Xyn10B-TM3 and Xyn10B-TM4, Xyn10B-TM1 and Xyn10B-TM2 had higher hydrolytic activity, thermostability and affinity on insoluble substrates. It is noteworthy that Xyn10B-TM1 and Xyn10B-TM2 have higher enzymatic activity on insoluble xylan than the soluble counterparts, whereas Xyn10B-TM3 and Xyn10B-TM4 showed opposite characteristics. The kinetic parameters analysis of Xyn10B-TM1 on xylan showed V _max was 5740, 1300, 1033, and 3925 U/μmol on insoluble oat spelt xylan (OSX), soluble beechwood xylan (BWX), soluble sugar cane xylan (SCX), and soluble corncob xylan (CCX), respectively. The results indicated that CBM22s especially CBM22c promoted the hydrolytic activity, thermostability and affinity on insoluble substrates of the Xyn10B truncations. The functions of CBM22, CBM9, CD and SLH are different, while contribute synergetically to the thermostability, protein structure integrity, substrate binding, and high hydrolytic activity on insoluble xylan of untreated lignocellulosic biomass. The domains of CBM22, CBM9, CD and SLH have different characteristics, which synergistically promote the thermostability, protein structure integrity, affinity on insoluble substrates and enzymatic activity properties of Xyn10B.

CONCLUSIONS

The extracellular endo-β-1,4-xylanase with multidomain structures of CBM, CD and SLH promote the biodegradation of insoluble xylan in untreated lignocellulosic biomass by thermophilic C. lactoaceticus.

Alkaline Active Hemicellulases

Xylan and mannan are the two most abundant hemicelluloses, and enzymes that modify these polysaccharides are prominent hemicellulases with immense biotechnological importance. Among these enzymes, xylanases and mannanases which play the vital role in the hydrolysis of xylan and mannan, respectively, attracted a great deal of interest. These hemicellulases have got applications in food, feed, bioethanol, pulp and paper, chemical, and beverage producing industries as well as in biorefineries and environmental biotechnology. The great majority of the enzymes used in these applications are optimally active in mildly acidic to neutral range. However, in recent years, alkaline active enzymes have also become increasingly important. This is mainly due to some benefits of utilizing alkaline active hemicellulases over that of neutral or acid active enzymes. One of the advantages is that the alkaline active enzymes are most suitable to applications that require high pH such as Kraft pulp delignification, detergent formulation, and cotton bioscouring. The other benefit is related to the better solubility of hemicelluloses at high pH. Since the efficiency of enzymatic hydrolysis is often positively correlated to substrate solubility, the hydrolysis of hemicelluloses can be more efficient if performed at high pH. High pH hydrolysis requires the use of alkaline active enzymes. Moreover, alkaline extraction is the most common hemicellulose extraction method, and direct hydrolysis of the alkali-extracted hemicellulose could be of great interest in the valorization of hemicellulose. Direct hydrolysis avoids the time-consuming extensive washing, and neutralization processes required if non-alkaline active enzymes are opted to be used. Furthermore, most alkaline active enzymes are relatively active in a wide range of pH, and at least some of them are significantly or even optimally active in slightly acidic to neutral pH range. Such enzymes can be eligible for non-alkaline applications such as in feed, food, and beverage industries.This chapter largely focuses on the most important alkaline active hemicellulases, endo-β-1,4-xylanases and β-mannanases. It summarizes the relevant catalytic properties, structural features, as well as the real and potential applications of these remarkable hemicellulases in textile, paper and pulp, detergent, feed, food, and prebiotic producing industries. In addition, the chapter depicts the role of these extremozymes in valorization of hemicelluloses to platform chemicals and alike in biorefineries. It also reviews hemicelluloses and discusses their biotechnological importance.

Fate of p-hydroxycinnamates and structural characteristics of residual hemicelluloses and lignin during alkaline-sulfite chemithermomechanical pretreatment of sugarcane bagasse

BACKGROUND

Preparing multiple products from lignocellulosic biomass feedstock enhances the profit and sustainability of future biorefineries. Grasses are suitable feedstocks for biorefineries as they permit a variety of possible by-products due to their particular chemical characteristics and morphology. Elucidating the fate of p-hydroxycinnamates (ferulates-FAs and p-coumarates-pCAs) and major structural components during bioprocessing helps to discriminate the sources of recalcitrance in grasses and paves the way for the recovery of p-hydroxycinnamates, which have multiple applications. To address these subjects, we assessed sugarcane bagasse biorefining under alkaline-sulfite chemithermomechanical (AS-CTM) pretreatment and enzymatic saccharification.

RESULTS

The mass balances of the major bagasse components were combined with 2D-NMR structural evaluation of process solids to advance our understanding of sugarcane bagasse changes during biorefining. AS-CTM pretreatment provided a high yield and thoroughly digestible substrates. The pretreated material was depleted in acetyl groups, but retained 62 and 79% of the original lignin and xylan, respectively. Forty percent of the total FAs and pCAs were also retained in pretreated material. After pretreatment and enzymatic hydrolysis, the residual solids contained mostly lignin and ester-linked pCAs, with minor amounts of FAs and non-digested polysaccharides. Saponification of the residual solids, at a higher alkali load, cleaved all the ester linkages in the pCAs; nevertheless, a significant fraction of the pCAs remained attached to the saponified solids, probably to lignin, through 4-O ether-linkages.

CONCLUSION

AS-CTM pretreatment provided soundly digestible substrates, which retain substantial amounts of xylans and lignin. Acetyl groups were depleted, but 40% of the total FAs and pCAs remained in pretreated material. Ester-linked pCAs detected in pretreated material also resisted to the enzymatic hydrolysis step. Only a more severe saponification reaction cleaved ester linkages of pCAs from residual solids; nevertheless, pCAs remained attached to the core lignin through 4-O ether-linkages, suggesting the occurrence of an alkali-stable fraction of pCAs in sugarcane bagasse.