Enhancing the catalytic activity of a novel GH5 cellulase GtCel5 from Gloeophyllum trabeum CBS 900.73 by site-directed mutagenesis on loop 6

Recent Progress on Conversion of Lignocellulosic Biomass by MOF-Immobilized Enzyme

The enzyme catalysis conversion of lignocellulosic biomass into valuable chemicals and fuels showed a bright outlook for replacing fossil resources. However, the high cost and easy deactivation of free enzymes restrict the conversion process. Immobilization of enzymes in metal-organic frameworks (MOFs) is one of the most promising strategies due to MOF materials' tunable building units, multiple pore structures, and excellent biocompatibility. Also, MOFs are ideal support materials and could enhance the stability and reusability of enzymes. In this paper, recent progress on the conversion of cellulose, hemicellulose, and lignin by MOF-immobilized enzymes is extensively reviewed. This paper focuses on the immobilized enzyme performances and enzymatic mechanism. Finally, the challenges of the conversion of lignocellulosic biomass by MOF-immobilized enzyme are discussed.

Insights into the transcriptomic mechanism and characterization of endoglucanases from Aspergillus terreus in cellulose degradation

Filamentous fungi are the main industrial source of cellulases which are important in the process of converting cellulose to fermentable sugars. In this study, transcriptome analysis was conducted on Aspergillus terreus NEAU-7 cultivated using corn stover and glucose as carbon sources. Four putative endoglucanases (EG5A, EG7A, EG12A, and EG12C) from A. terreus NEAU-7 were efficiently expressed in Pichia pastoris. Among them, EG7A exhibited the highest enzyme activity (75.17 U/mg) with an optimal temperature of 40 °C and pH 5.0. EG5A and EG12A displayed specific activities of 19.92 U/mg and 14.62 U/mg, respectively, at 50 °C. EG12C showed acidophilic characteristics with an optimal pH of 3.0 and a specific activity of 12.21 U/mg at 40 °C. With CMC-Na as the substrate, the Km value of EG5A, EG7A, EG12A or, EG12C was, 11.08 ± 0.87 mg/mL, 6.82 ± 0.74 mg/mL, 7.26 ± 0.64 mg/mL, and 9.88 ± 0.86 mg/mL, with Vmax values of 1258.23 ± 51.62 μmol∙min-1∙mg-1, 842.65 ± 41.53 μmol∙min-1∙mg-1, 499.38 ± 20.42 μmol∙min-1∙mg-1, and 681.41 ± 30.08 μmol∙min-1∙mg-1, respectively. The co-treatment of EG7A with the commercial cellulase increased the yield of reducing sugar by 155.77 % (filter paper) and 130.49 % (corn stover). Molecular docking assay showed the interaction energy of EG7A with cellotetraose at -10.50 kcal/mol, surpassing EG12A (-10.43 kcal/mol), EG12C (-10.28 kcal/mol), and EG5A (-9.00 kcal/mol). Root Mean Square Deviation (RMSD) and Solvent Accessible Surface Area (SASA) values revealed that the presence of cellotetraose stabilized the molecular dynamics simulation of the cellotetraose-protein complex over a 100 ns time scale. This study provides valuable insights for developing recombinant enzymes and biomass degradation technologies.

Combination of engineering the substrate and Ca2+ binding domains of heparinase I to improve the catalytic activity

Heparinase I (EC 4.2.2.7), is an enzyme that cleaves heparin, showing great potential for eco-friendly production of low molecular weight heparin (LMWH). However, owing to its poor catalytic activity and thermal stability, the industrial application of heparinase I has been severely hindered. To improve the catalytic activity, we proposed to engineer both the substrate and Ca2+ binding domains of heparinase I. Several heparinases I from different organisms were selected for multiple sequence alignment and molecular docking to screen the key residues in the binding domain. Nine single-point mutations were selected to enhance the catalytic activity of heparinase I. Among them, T250D was the most highly active one, whereas mutations around Ca2+ binding domain yielded two active mutants. Mutant D152S/R244K/T250D with significantly increased catalytic activity was obtained by combined mutation. The catalytic efficiency of the mutant was 118,875.8 min-1·µM-1, which was improved 5.26 times. Molecular modeling revealed that the improved activity and stability of the mutants were probably attributed to the formation of new hydrogen bonds. The highly active mutant had great potential applications in industry and the strategy could be used to improve the performance of other enzymes.

Dynamics of loops surrounding the active site architecture in GH5_2 subfamily TfCel5A for cellulose degradation

BACKGROUND

Lignocellulose is the most abundant natural biomass resource for the production of biofuels and other chemicals. The efficient degradation of cellulose by cellulases is a critical step for the lignocellulose bioconversion. Understanding the structure-catalysis relationship is vital for rational design of more stable and highly active enzymes. Glycoside hydrolase (GH) family 5 is the largest and most functionally diverse group of cellulases, with a conserved TIM barrel structure. The important roles of the various loop regions of GH5 enzymes in catalysis, however, remain poorly understood.

RESULTS

In the present study, we investigated the relationship between the loops surrounding active site architecture and its catalytic efficiency, taking TfCel5A, an enzyme from GH5_2 subfamily of Thermobifida fusca, as an example. Large-scale computational simulations and site-directed mutagenesis experiments revealed that three loops (loop 8, 3, and 7) around active cleft played diverse roles in substrate binding, intermediate formation, and product release, respectively. The highly flexible and charged residue triad of loop 8 was responsible for capturing the ligand into the active cleft. Severe fluctuation of loop 3 led to the distortion of sugar conformation at the - 1 subsite. The wobble of loop 7 might facilitate product release, and the enzyme activity of the mutant Y361W in loop 7 was increased by approximately 40%.

CONCLUSION

This study unraveled the vital roles of loops in active site architecture and provided new insights into the catalytic mechanism of the GH5_2 cellulases.

Modulation of the catalytic activity and thermostability of a thermostable GH7 endoglucanase by engineering the key loop B3

The loop B3 of glycoside hydrolase family 7 (GH7) endoglucanases is confined into long and short types. TtCel7 is a thermophilic GH7 endoglucanase from Thermothelomyces thermophilus ATCC 42464 with a long loop B3. TtCel7 was distinct for the excellent thermostability (>30 % residual activity after 1-h incubation at 90 °C). The catalytic efficiency was reduced by removing the disulfide bond in loop B3 (C220A) and truncated the loop B3 (B3cut). However, B3cut exhibited improved thermostability, the remaining enzyme activity increased by 39 %-171 % compared toTtCel7 when treated at 70-90 °C for 1-h. Based on the analysis of molecular dynamics simulation, both loops B1 and A3 of B3cut swing toward the catalytic center, which contributed to the reduced cleft-space and increased structure-rigidity. Conversely, the deletion of disulfide bond resulted in a reduction of structural rigidity in C220A. Through structure-directed enzyme modulation, this study has identified two structural elements that are related to the catalysis and thermostability of TtCel7. The loop B3 of TtCel7 possibly stretches the catalytic pocket, thereby increases the openness of the catalytic tunnel and enhancing flexibility for efficient catalysis. Additionally, the disulfide bond within loop B3 serves to enhance structural stability and maintain a heightened level of activity.

Modification of the 4-Hydroxyphenylacetate-3-hydroxylase Substrate Pocket to Increase Activity towards Resveratrol

4-Hydroxyphenylacetate-3-hydroxylase (4HPA3H; EC 1.14.14.9) is a heterodimeric flavin-dependent monooxygenase complex that catalyzes the ortho-hydroxylation of resveratrol to produce piceatannol. Piceatannol has various health benefits and valuable applications in food, medicine, and cosmetics. Enhancing the catalytic activity of 4HPA3H toward resveratrol has the potential to benefit piceatannol production. In this study, the critical amino acid residues in the substrate pocket of 4HPA3H that affect its activity toward resveratrol were identified using semi-rational engineering. Two key amino acid sites (I157 and A211) were discovered and the simultaneous "best" mutant I157L/A211D enabled catalytic efficiency (Kcat/Km-resveratrol) to increase by a factor of 4.7-fold. Molecular dynamics simulations indicated that the increased flexibility of the 4HPA3H substrate pocket has the potential to improve the catalytic activity of the enzyme toward resveratrol. On this basis, we produced 3.78 mM piceatannol by using the mutant I157L/A211D whole cells. In this study, we successfully developed a highly active 4HPA3H variant for the hydroxylation of resveratrol to piceatannol.

Construction and characterization of a Myceliophthora thermophila lytic polysaccharide monooxygenase mutant S174C/A93C with improved thermostability

Lytic polysaccharide monooxygenases (LPMOs) can oxidatively cleave the glycosidic bonds of crystalline polysaccharides, providing more accessible sites for polysaccharide hydrolases and promoting efficient conversion of biomass. In order to promote industrial applications of LPMOs, the stability of an LPMO of Myceliophthora thermophila C1 (MtC1LPMO) was improved by adding disulfide bonds in this study. Firstly, the structural changes of wild-type (WT) MtC1LPMO at different temperatures were explored using molecular dynamics simulations, and eight mutants were selected by combining the predicted results from Disulfide by Design (DBD), Multi agent stability prediction upon point mutations (Maestro) and Bridge disulfide (BridgeD) websites. Then, the enzymatic properties of the different mutants were determined after their expression and purification, and the mutant S174C/A93C with the highest thermal stability was obtained. The specific activities of unheated S174C/A93C and WT were 160.6 ± 1.7 U/g and 174.8 ± 7.5 U/g, respectively, while those of S174C/A93C and WT treated at 70 °C for 4 h were 77.7 ± 3.4 U/g and 46.1 ± 0.4 U/g, respectively. The transition midpoint temperature of S174C/A93C was 2.7 °C higher than that of WT. The conversion efficiency of S174C/A93C for both microcrystalline cellulose and corn straw was about 1.5 times higher than that of WT. Finally, molecular dynamics simulations revealed that the introduction of disulfide bonds increased the β-sheet content of the H1-E34 region, thus improving the rigidity of the protein. Therefore, the overall structural stability of S174C/A93C was improved, which in turn improved its thermal stability.

Production, purification, characterization and application of two novel endoglucanases from buffalo rumen metagenome

BACKGROUND

Lignocellulose biomass is the most abundant and renewable material in nature. The objectives of this study were to characterize two endoglucanases TrepCel3 and TrepCel4, and determine the effect of the combination of them (1.2 mg TrepCel3, 0.8 mg TrepCel4) on in vitro rumen fermentation characteristics. In this study, three nature lignocellulosic substrates (rice straw, RS; wheat straw, WS; leymus chinensis, LC) were evaluated for their in vitro digestibility, gas, NH3-N and volatile fatty acid (VFA) production, and microbial protein (MCP) synthesis by adding enzymatic combination.

METHODS

Two endoglucanases' genes were successfully expressed in Escherichia coli (E. coli) BL21 (DE3), and enzymatic characteristics were further characterized. The combination of TrepCel3 and TrepCel4 was incubated with lignocellulosic substrates to evaluate its hydrolysis ability.

RESULTS

The maximum enzymatic activity of TrepCel3 was determined at pH 5.0 and 40 °C, while TrepCel4 was at pH 6.0 and 50 °C. They were stable over the temperature range of 30 to 60 °C, and active within the pH range of 4.0 to 9.0. The TrepCel3 and TrepCel4 had the highest activity in lichenan 436.9 ± 8.30 and 377.6 ± 6.80 U/mg, respectively. The combination of TrepCel3 and TrepCel4 exhibited the highest efficiency at the ratio of 60:40. Compared to maximum hydrolysis of TrepCel3 or TrepCel4 separately, this combination was shown to have a superior ability to maximize the saccharification yield from lignocellulosic substrates up to 188.4% for RS, 236.7% for wheat straw WS, 222.4% for LC and 131.1% for sugar beet pulp (SBP). Supplemental this combination enhanced the dry matter digestion (DMD), gas, NH3-N and VFA production, and MCP synthesis during in vitro rumen fermentation.

CONCLUSIONS

The TrepCel3 and TrepCel4 exhibited the synergistic relationship (60:40) and significantly increased the saccharification yield of lignocellulosic substrates. The combination of them stimulated in vitro rumen fermentation of lignocellulosic substrates. This combination has the potential to be a feed additive to improve agricultural residues utilization in ruminants. If possible, in the future, experiments in vivo should be carried out to fully evaluate its effect.

Characterization of aspartokinase double mutants using a combination of experiments and simulations

Aspartokinase (AK) is synergistically suppressed by Thr and Lys in the Corynebacterium metabolic pathway. Site-directed mutations can significantly improve AK inhibition. Our previous studies confirmed that sites 379 and 380 were important sites affecting enzyme activity, so we further screen the double mutants with excellent enzymatic properties from sites 379 and 380, and discuss the difference of enzyme activity between the double mutants and single mutants. Here, a double mutant, T379L/A380 M, with improved enzyme activity (2.74-fold) was obtained. Enzymatic property experiments showed that the optimum temperature of T379L/A380 M increased from 26 °C (recombinant Escherichia coli; WT-AK) to 45 °C and that the optimal pH decreased from 8.0 (WT-AK) to 7.5. Further, the half-life decreased from 4.5 to 3.32 h. These enzymatic properties were better than other mutant strains. Inhibition was diminished with low concentrations of Lys, and Lys + Thr presented an activating role. Subsequently, the reasons for the improved AK enzyme activity were illustrated with microscale thermophoresis (MST) experiments and molecular dynamic (MD) simulation by measuring ligand affinity and AK conformational changes. MST showed that the affinity between T379L/A380 M and Lys decreased, but the affinity between T379L/A380 M and Asp increased, promoting T379L/A380 M enzyme activity. MD experiments showed that T379L/A380 M enhanced the Asp-ATP affinity and catalyzed the transfer of residues S192 and D193 to Asp, promoting T379L/A380 M enzyme activity. However, the mutation did not cause fluctuations in the substrate Asp and ATP pockets. This might be why the enzyme activity was inferior to that of the single mutants (T379L and A380 M).

Engineering cellulases for conversion of lignocellulosic biomass

Lignocellulosic biomass is a renewable source of energy, chemicals and materials. Many applications of this resource require the depolymerization of one or more of its polymeric constituents. Efficient enzymatic depolymerization of cellulose to glucose by cellulases and accessory enzymes such as lytic polysaccharide monooxygenases is a prerequisite for economically viable exploitation of this biomass. Microbes produce a remarkably diverse range of cellulases, which consist of glycoside hydrolase (GH) catalytic domains and, although not in all cases, substrate-binding carbohydrate-binding modules (CBMs). As enzymes are a considerable cost factor, there is great interest in finding or engineering improved and robust cellulases, with higher activity and stability, easy expression, and minimal product inhibition. This review addresses relevant engineering targets for cellulases, discusses a few notable cellulase engineering studies of the past decades and provides an overview of recent work in the field.

Dissecting the essential role of N-glycosylation in catalytic performance of xanthan lyase

Modified xanthan produced by xanthan lyase has broad application prospects in the food industry. However, the catalytic performance of xanthan lyase still needs to be improved through rational design. To address this problem, in this work, the glycosylation and its influences on the catalytic performance of a xanthan lyase (EcXly), which was heterologously expressed in Escherichia coli, were reported. Liquid chromatography coupled to tandem mass spectrometry analysis revealed that the N599 site of EcXly was modified by a single N-glycan chain. Based on sequence alignment and three-dimensional structure prediction, it could be deduced that the N599 site was located in the catalytic domain of EcXly and in close proximity to the catalytic residues. After site-directed mutagenesis of N599 with alanine, aspartic acid and glycine, respectively, the EcXly and its mutants were characterized and compared. The results demonstrated that elimination of the N-glycosylation had diminished the specific activity, pH stability, and substrate affinity of EcXly. Fluorescence spectra further revealed that the glycosylation could significantly affect the overall tertiary structure of EcXly. Therefore, in prokaryotic hosts, the N-glycosylation could influence the catalytic performance of the enzyme by changing its structure. To the best of our knowledge, this is the first report about the post-translational modification of xanthan lyase in prokaryotes. Overall, our work enriched research on the role of glycan chains in the functional performance of proteins expressed in prokaryotes and should be valuable for the rational design of xanthan lyase to produce modified xanthan for industrial application.

Immobilization of Penicillin G Acylase on Vinyl Sulfone-Agarose: An Unexpected Effect of the Ionic Strength on the Performance of the Immobilization Process

Penicillin G acylase (PGA) from Escherichia coli was immobilized on vinyl sulfone (VS) agarose. The immobilization of the enzyme failed at all pH values using 50 mM of buffer, while the progressive increase of ionic strength permitted its rapid immobilization under all studied pH values. This suggests that the moderate hydrophobicity of VS groups is enough to transform the VS-agarose in a heterofunctional support, that is, a support bearing hydrophobic features (able to adsorb the proteins) and chemical reactivity (able to give covalent bonds). Once PGA was immobilized on this support, the PGA immobilization on VS-agarose was optimized with the purpose of obtaining a stable and active biocatalyst, optimizing the immobilization, incubation and blocking steps characteristics of this immobilization protocol. Optimal conditions were immobilization in 1 M of sodium sulfate at pH 7.0, incubation at pH 10.0 for 3 h in the presence of glycerol and phenyl acetic acid, and final blocking with glycine or ethanolamine. This produced biocatalysts with stabilities similar to that of the glyoxyl-PGA (the most stable biocatalyst of this enzyme described in literature), although presenting just over 55% of the initially offered enzyme activity versus the 80% that is recovered using the glyoxyl-PGA. This heterofuncionality of agarose VS beads opens new possibilities for enzyme immobilization on this support.

Insights into promiscuous chitosanases: the known and the unknown

Chitosanase, a glycoside hydrolase (GH), catalyzes the cleavage of β-1,4-glycosidic bonds in polysaccharides and is widely distributed in nature. Many organisms produce chitosanases, and numerous chitosanases in the GH families have been intensely studied. The reported chitosanases mainly cleaved the inter-glucosamine glycosidic bonds, while substrate specificity is not strictly unique due to the existence of bifunctional or multifunctional activity profiles. The promiscuity of chitosanases is essential for the different pathways of biomass polysaccharide conversion and understanding of the chitosanase evolutionary process. However, the reviews for this aspect are completely unknown. This review provides an overview of the promiscuous activities, also considering the substrate and product specificity of chitosanases observed to date. These contribute to important implications for the future discovery and research of promiscuous chitosanases and applications related to biomass conversion. KEY POINTS: • The promiscuity of chitosanases is reviewed for the first time. • The current review provides insights into the substrate specificity of chitosanases. • The mode-product relationship and prospect of promiscuous chitosanases are highlighted.

Identification and Mutation Analysis of Nonconserved Residues on the TIM-Barrel Surface of GH5_5 Cellulases for Catalytic Efficiency and Stability Improvement

Exploring the potential functions of nonconserved residues on the outer side of α-helices and systematically optimizing them are pivotal for their application in protein engineering. Based on the evolutionary structural conservation analysis of GH5_5 cellulases, a practical molecular improvement strategy was developed. Highly variable sites on the outer side of the α-helices of the GH5_5 cellulase from Aspergillus niger (AnCel5A) were screened, and 14 out of the 34 highly variable sites were confirmed to exert a positive effect on the activity. After the modular combination of the positive mutations, the catalytic efficiency of the mutants was further improved. By using CMC-Na as the substrate, the catalytic efficiency and specific activity of variant AnCel5A_N193A/T300P/D307P were approximately 2.0-fold that of AnCel5A (227 ± 21 versus 451 ± 43 ml/s/mg and 1,726 ± 19 versus 3,472 ± 42 U/mg, respectively). The half-life (t_1/2) of variant AnCel5A_N193A/T300P/D307P at 75°C was 2.36 times that of AnCel5A. The role of these sites was successfully validated in other GH5_5 cellulases. Computational analyses revealed that the flexibility of the loop 6-loop 7-loop 8 region was responsible for the increased catalytic performance. This work not only illustrated the important role of rapidly evolving positions on the outer side of the α-helices of GH5_5 cellulases but also revealed new insights into engineering the proteins that nature left as clues for us to find. IMPORTANCE A comprehensive understanding of the residues on the α-helices of the GH5_5 cellulases is important for catalytic efficiency and stability improvement. The main objective of this study was to use the evolutionary conservation and plasticity of the TIM-barrel fold to probe the relationship between nonconserved residues on the outer side of the α-helices and the catalytic efficiency of GH5_5 cellulases by conducting structure-guided protein engineering. By using a four-step nonconserved residue screening strategy, the functional role of nonconserved residues on the outer side of the α-helices was effectively identified, and a variant with superior performance and capability was constructed. Hence, this study proved the effectiveness of this strategy in engineering GH5_5 cellulases and provided a potential competitor for industrial applications. Furthermore, this study sheds new light on engineering TIM-barrel proteins.

Multifunctional Enzyme with Endoglucanase and Alginase/Glucuronan Lyase Activities from Bacterium Cellulophaga lytica

Cellulophaga lytica is a Gram-negative aerobic bacterium in the genome of which there are many genes encoding polysaccharide degrading enzymes. One of the enzymes named ClGP contains a glycoside hydrolase domain from the GH5 family and a polysaccharide lyase domain from the PL31 family. The enzyme also contains the TAT signaling peptide and the TIGR04183 domain that indicates extracellular nature of the enzyme. Phylogenetic analysis has shown that the enzymes most closely related to ClGP and containing all four domains (TAT, GH5, PL31, TIGR04183) are widespread among bacterial species belonging to the Flavobacteriaceae family. ClGP produced by the recombinant strain of E. coli was purified and characterized. ClGP exhibited activity of endoglucanase (EC 3.2.1.4) and catalyzed hydrolysis of β-D-glucan, carboxymethyl cellulose sodium salt (CMC-Na), and amorphous cellulose, but failed to hydrolyze microcrystalline cellulose and xylan. Products of CMC hydrolysis were cellobiose and cellotriose, whereas β-D-glucan was hydrolyzed to glucose, cellobiose, cellotetraose, and cellopentaose. ClGP was more active against the poly-β-D-mannuronate blocks than against the poly-α-L-glucuronate blocks of alginic acid. This indicates that the enzyme is a polyM lyase (EC 4.2.2.3). ClGP was active against polyglucuronic acid, so it displayed a glucuronan lyase (EC 4.2.2.14) activity. The enzyme had a neutral pH-optimum, was stable in the pH range 6.0-8.0, and displayed moderate thermal stability. ClGP effectively saccharified two species of brown algae, Saccharina latissima and Laminaria digitata, that suggests its potential for use in the production of biofuel from macroalgae.

Expression, characterization, and activity optimization of a novel cellulase from the thermophilic bacteria Cohnella sp. A01

Cellulases are hydrolytic enzymes with wide scientific and industrial applications. We described a novel cellulase, CelC307, from the thermophilic indigenous Cohnella sp. A01. The 3-D structure of the CelC307 was predicted by comparative modeling. Docking of CelC307 with specific inhibitors and molecular dynamic (MD) simulation revealed that these ligands bound in a non-competitive manner. The CelC307 protein was purified and characterized after recombinant expression in Escherichia coli (E. coli) BL21. Using CMC 1% as the substrate, the thermodynamic values were determined as K_m 0.46 mM, k_cat 104.30 × 10^-3 (S^-1), and k_cat/K_m 226.73 (M^-1 S^-1). The CelC307 was optimally active at 40 °C and pH 7.0. The culture condition was optimized for improved CelC307 expression using Plackett-Burman and Box-Behnken design as follows: temperature 20 °C, pH 7.5, and inoculation concentration with an OD₆₀₀ = 1. The endoglucanase activity was positively modulated in the presence of Na⁺, Li⁺, Ca²⁺, 2-mercaptoethanol (2-ME), and glycerol. The thermodynamic parameters calculated for CelC307 confirmed its inherent thermostability. The characterized CelC307 may be a suitable candidate for various biotechnological applications.

Improvement of catalytic performance of endoglucanase CgEndo from Colletotrichum graminicola by site-directed mutagenesis

In order to improve the catalytic efficiency of cellulase for more effective utilization of lignocellulose, a novel endoglucanase (CgEndo) from Colletotrichum graminicola was expressed by Pichia pastoris X33 and modified by site-directed mutagenesis. Two mutants, Y63S and N20D/S113T, with 62.31% and 57.14% increased enzyme activities were obtained, respectively. On this basis, their biochemical properties, kinetic parameters, structural information as well as the application in biomass degradation were investigated and compared with the wild-type CgEngo. The results indicated that the mutation Y63S and N20D/S113T resulted in an improvement of proximity between enzyme and substrate through conformational changes of the catalytic region, which might contribute to the higher enzyme activities and catalysis efficiency (K_cat/K_m) of Y63S and N20D/S113T. These findings laid important foundation for the further engineering of this endoglucanase and practical application in efficient degradation of cellulosic biomass in nature.

Glycosyl hydrolases family 5, subfamily 5: Relevance and structural insights for designing improved biomass degrading cocktails

Endoglucanases are carbohydrate-degrading enzymes widely used for bioethanol production as part of the enzymatic cocktail. However, family 5 subfamily 5 (GH5_5) endoglucanases are still poorly explored in depth. The Trichoderma reesei representative is the most studied enzyme, presenting catalytic activity in acidic media and mild temperature conditions. Though biochemically similar, its modular structure and synergy with other components vary greatly compared to other GH5_5 members and there is still a lack of specific studies regarding their interaction with other cellulases and application on novel and better mixtures. In this regard, the threedimensional structure elucidation is a highly valuable tool to both uncover basic catalytic mechanisms and implement engineering techniques, proved by the high success rate GH5_5 endoglucanases show. GH5_5 enzymes must be carefully evaluated to fully uncover their potential in biomass-degrading cocktails: the optimal industrial conditions, synergy with other cellulases, structural studies, and enzyme engineering approaches. We aimed to provide the current understanding of these main topics, collecting all available information about characterized GH5_5 endoglucanases function, structure, and bench experiments, in order to suggest future directions to a better application of these enzymes in the industry.

Fungal cellulases: protein engineering and post-translational modifications

Enzymatic degradation of lignocelluloses into fermentable sugars to produce biofuels and other biomaterials is critical for environmentally sustainable development and energy resource supply. However, there are problems in enzymatic cellulose hydrolysis, such as the complex cellulase composition, low degradation efficiency, high production cost, and post-translational modifications (PTMs), all of which are closely related to specific characteristics of cellulases that remain unclear. These problems hinder the practical application of cellulases. Due to the rapid development of computer technology in recent years, computer-aided protein engineering is being widely used, which also brings new opportunities for the development of cellulases. Especially in recent years, a large number of studies have reported on the application of computer-aided protein engineering in the development of cellulases; however, these articles have not been systematically reviewed. This article focused on the aspect of protein engineering and PTMs of fungal cellulases. In this manuscript, the latest literatures and the distribution of potential sites of cellulases for engineering have been systematically summarized, which provide reference for further improvement of cellulase properties. KEY POINTS: •Rational design based on virtual mutagenesis can improve cellulase properties. •Modifying protein side chains and glycans helps obtain superior cellulases. •N-terminal glutamine-pyroglutamate conversion stabilizes fungal cellulases.

Microbial cellulases - An update towards its surface chemistry, genetic engineering and recovery for its biotechnological potential

The inherent resistance of lignocellulosic biomass makes it impervious for industrially important enzymes such as cellulases to hydrolyze cellulose. Further, the competitive absorption behavior of lignin and hemicellulose for cellulases, due to their electron-rich surfaces augments the inappropriate utilization of these enzymes. Hence, modification of the surface charge of the cellulases to reduce its non-specific binding to lignin and enhance its affinity for cellulose is an urgent necessity. Further, maintaining the stability of cellulases by the preservation of their secondary structures using immobilization techniques will also play an integral role in its industrial production. In silico approaches for increasing the catalytic activity of cellulase enzymes is also significant along with a range of substrate specificity. In addition, enhanced productivity of cellulases by tailoring the related genes through the process of genetic engineering and higher cellulase recovery after saccharification seems to be promising areas for efficient and large-scale enzyme production concepts.

Current Status of Mining, Modification, and Application of Cellulases in Bioactive Substance Extraction

Cellulases have been used to extract bioactive ingredients from medical plants; however, the poor enzymatic properties of current cellulases significantly limit their application. Two strategies are expected to address this concern: (1) new cellulase gene mining strategies have been promoted, optimized, and integrated, thanks to the improvement of gene sequencing, genomic data, and algorithm optimization, and (2) known cellulases are being modified, thanks to the development of protein engineering, crystal structure data, and computing power. Here, we focus on mining strategies and provide a systemic overview of two approaches based on sequencing and function. Strategies based on protein structure modification, such as introducing disulfide bonds, proline, salt bridges, N-glycosylation modification, and truncation of loop structures, have already been summarized. This review discusses four aspects of cellulase-assisted extraction. Initially, cellulase alone was used to extract bioactive substances, and later, mixed enzyme systems were developed. Physical methods such as ultrasound, microwave, and high hydrostatic pressure have assisted in improving extraction efficiency. Cellulase changes the structure of biomolecules during the extraction process to convert them into effective ingredients with better activity and bioavailability. The combination of cellulase with other enzymes and physical technologies is a promising strategy for future extraction applications.

A multi-functional genetic manipulation system and its use in high-level expression of a β-mannanase mutant with high specific activity in Pichia pastoris

To further extend the practical application of a thermostable and acidic resistance β-mannanase (ManAK) in animal feed additives, an effective strategy that combined directed evolution and metabolic engineering was developed. Four positive mutants (P191M, P194E, S199G and S268Q) with enhanced specific activity (25.5%-60.9%) were obtained. The S199G mutant exhibited 56.7% enhancement of specific activity at 37°C and good thermostability, and this was selected for high-level expression in P. pastoris X33. A multi-functional and scarless genetic manipulation system was proposed and functionally verified (gene deletion, substitution/insertion and point mutation). This was then subjected to Rox1p (an oxygen related transcription regulator) deletion and Vitreoscilla haemoglobin (VHb) co-expression for high enzyme productivity in P. pastoris X33VIIManAKS199G . An excellent strain, named X33VIIManAKS199G ∆rox1::VHb, was achieved by combining these two factors, and then the maximum enzymatic activity was further increased to 3753 U ml-1 , which was nearly twice as much as the maximum production of ManAK in P. pastoris. This work provides a systematic and effective method to improve the enzymatic yield of β-mannanase, promotes the application of ManAK in feed additives, and also demonstrated that a scarless genetic manipulation tool is useful in P. pastoris.

Improvements of the productivity and saccharification efficiency of the cellulolytic β-glucosidase D2-BGL in Pichia pastoris via directed evolution

BACKGROUND

β-Glucosidases are essential for cellulose hydrolysis by catalyzing the final cellulolytic degradation of cello-oligomers and cellobiose to glucose. D2-BGL is a fungal glycoside hydrolase family 3 (GH3) β-glucosidase isolated from Chaetomella raphigera with high substrate affinity, and is an efficient β-glucosidase supplement to Trichoderma reesei cellulase mixtures for the saccharification of lignocellulosic biomass.

RESULTS

We have carried out error-prone PCR to further increase catalytic efficiency of wild-type (WT) D2-BGL. Three mutants, each with substitution of two amino acids on D2-BGL, exhibited increased activity in a preliminary mutant screening in Saccharomyces cerevisiae. Effects of single amino acid replacements on catalysis efficiency and enzyme production have been investigated by subsequent expression in Pichia pastoris. Substitution F256M resulted in enhancing the tolerance to substrate inhibition and specific activity, and substitution D224G resulted in increasing the production of recombinant enzyme. The best D2-BGL mutant generated, Mut M, was constructed by combining beneficial mutations D224G, F256M and Y260D. Expression of Mut M in Pichia pastoris resulted in 2.7-fold higher production of recombinant protein, higher V_max and greater substrate inhibition tolerance towards cellobiose relative to wild-type enzyme. Surprisingly, Mut M overexpression induced the ER unfolded protein response to a level lower than that with WT D2 overexpression in P. pastoris. When combined with the T. reesei cellulase preparation Celluclast 1.5L, Mut M hydrolyzed acid-pretreated sugarcane bagasse more efficiently than WT D2.

CONCLUSIONS

D2-BGL mutant Mut M was generated successfully by following directed evolution approach. Mut M carries three mutations that are not reported in other directed evolution studies of GH3 β-glucosidases, and this mutant exhibited greater tolerance to substrate inhibition and higher V_max than wild-type enzyme. Besides the enhanced specific activity, Mut M also exhibited a higher protein titer than WT D2 when it was overexpressed in P. pastoris. Our study demonstrates that both catalytic efficiency and productivity of a cellulolytic enzyme can be enhanced via protein engineering.

Improving the catalytic efficiency and substrate affinity of a novel esterase from marine Klebsiella aerogenes by random and site-directed mutation

A novel esterase (EstKa) from marine Klebsiella aerogenes was characterized with hydrolytic activity against p-nitrophenyl caprylate (pNPC, C₈) under optimum conditions (50 °C and pH 8.5). After two rounds of mutagenesis, two highly potential mutants (I6E9 and L7B11) were obtained with prominent activity, substrate affinity and thermostability. I6E9 (L90Q/P96T) and L7B11 (A37S/Q100L/S133G/R138C/Q156R) were 1.56- and 1.65-fold higher than EstKa in relative catalytic efficiency. The influence of each amino acid on enzyme activity was explored by site-directed mutation. The mutants Pro96Thr and Gln156Arg showed 1.29- and 1.48-fold increase in catalytic efficiency (Kcat/Km) and 54.4 and 36.2% decrease in substrate affinity (Km), respectively. The compound mutant Pro96Thr/Gln156Arg exhibited 68.9% decrease in Km and 1.41-fold increase in Kcat/Km relative to EstKa. Homology model structure analysis revealed that the replacement of Gln by hydrophilic Arg on the esterase surface improved the microenvironment stability and the activity. The replacement of Pro by Thr enabled the esterase enzyme to retain 90% relative activity after 3 h incubation at 45 °C. Structural analysis confirmed that the formation of a hydrogen bond leads to a notable increase of catalytic efficiency under high temperature conditions.

A Swollenin From Talaromyces leycettanus JCM12802 Enhances Cellulase Hydrolysis Toward Various Substrates

Swollenins exist within some fungal species and are candidate accessory proteins for the biodegradation of cellulosic substrates. Here, we describe the identification of a swollenin gene, Tlswo, in Talaromyces leycettanus JCM12802. Tlswo was successfully expressed in both Trichoderma reesei and Pichia pastoris. Assay results indicate that TlSWO is capable of releasing reducing sugars from lichenan, barley β-glucan, carboxymethyl cellulose sodium (CMC-Na) and laminarin. The specific activity of TlSWO toward lichenan, barley β-glucan, carboxymethyl cellulose sodium (CMC-Na) and laminarin is 9.0 ± 0.100, 8.9 ± 0.100, 2.3 ± 0.002 and 0.79 ± 0.002 U/mg, respectively. Additionally, TlSWO had disruptive activity on Avicel and a synergistic effect with cellobiohydrolases, increasing the activity on pretreated corn stover by up to 72.2%. The functional diversity of TlSWO broadens its applicability in experimental settings, and indicating that it may be a promising candidate for future industrial applications.

Multifunctional cellulases are potent, versatile tools for a renewable bioeconomy

Enzyme performance is critical to the future bioeconomy based on renewable plant materials. Plant biomass can be efficiently hydrolyzed by multifunctional cellulases (MFCs) into sugars suitable for conversion into fuels and chemicals, and MFCs fall into three functional categories. Recent work revealed MFCs with broad substrate specificity, dual exo-activity/endo-activity on cellulose, and intramolecular synergy, among other novel characteristics. Binding modules and accessory catalytic domains amplify MFC and xylanase activity in a wide variety of ways, and processive endoglucanases achieve autosynergy on cellulose. Multidomain MFCs from Caldicellulosiruptor are heat-tolerant, adaptable to variable cellulose crystallinity, and may provide interchangeable scaffolds for recombinant design. Further studies of MFC properties and their reactivity with plant biomass are recommended for increasing biorefinery yields.

Biochemical characterization of a novel thermo-halo-tolerant GH5 endoglucanase from a thermal spring metagenome

A novel endoglucanase gene, cel_M , was cloned from a thermal spring metagenome. The gene was expressed in Escherichia coli, and the protein was extracted and purified. The protein catalyzed the hydrolysis of amorphous cellulose in a wide range of temperatures, 30-95°C, with optimal activity at 80°C. It was able to tolerate high temperature (80°C) with a half-life of 8 h. Its activity was eminent in a wide pH range of 3.0-11.0, with the highest activity at pH 6.0. The enzyme was tested for halostability. Any significant loss was not recorded in the activity of Cel_M after the exposure to salinity (3 M NaCl) for 30 days. Furthermore, Cel_M displayed a substantial resistance toward metal ions, denaturant, reducing agent, organic solvent, and non-ionic surfactants. The amorphous cellulose, treated with Cel_M , was randomly cleaved, generating cello-oligosaccharides of 2-5 degree of polymerization. Furthermore, Cel_M was demonstrated to catalyze the hydrolysis of cellulose fraction in the delignified biomass samples, for example, sweet sorghum bagasse, rice straw, and corncob, into cello-oligosaccharides. Given that Cel_M is a thermo-halo-tolerant GH5 endoglucanase, with resistance to detergents and organic solvent, the biocatalyst could be of potential usefulness for a variety of industrial applications.

New thermostable endoglucanase from Spirochaeta thermophila and its mutants with altered substrate preferences

Endoglucanases are key elements in several industrial applications, such as cellulosic biomass hydrolysis, cellulose fiber modification for the production paper and composite materials, and in nanocellulose production. In all of these applications, the desired function of the endoglucanase is to create nicks in the amorphous regions of the cellulose. However, endoglucanase can be diverted from its activity on the fibers by other substrates-soluble oligosaccharides. This issue was addressed in the current study using enzyme engineering and an enzyme evolution approach. To this end, a hypothetical endoglucanase from a thermostable bacterium Spirochaeta thermophila was for the first time cloned and characterized. The wild-type enzyme was used as a starting point for mutagenesis and molecular evolution toward a preference for the higher molecular weight substrates. The best of the evolved enzymes was more active than the wild-type enzyme toward high molecular weight substrate at temperatures below 45 °C (3-fold more active at 30 °C) and showed little or no activity with low molecular weight substrates. These findings can be instrumental in bioeconomy sectors, such as second-generation biofuels and biomaterials from lignocellulosic biomass. KEY POINTS: • A new thermostable endoglucanase was characterized. • The substrate specificity of this endoglucanase was changed by means of genetic engineering. • A mutant with a preference for long molecular weight substrate was obtained and proposed to be beneficial for cellulose fiber modification.

Enhancing the catalytic activity of a GH5 processive endoglucanase from Bacillus subtilis BS-5 by site-directed mutagenesis

Processive endoglucanases possess both endo- and exoglucanase activity, making them attractive discovery and engineering targets. Here, a processive endoglucanase EG5C-1 from Bacillus subtilis was employed as the starting point for enzyme engineering. Referring to the complex structure information of EG5C-1 and cellohexaose, the amino acid residues in the active site architecture were identified and subjected to alanine scanning mutagenesis. The residues were chosen for a saturation mutagenesis since their variants showed similar activities to EG5C-1. Variants D70Q and S235W showed increased activity towards the substrates CMC and Avicel, an increase was further enhanced in D70Q/S235W double mutant, which displayed a 2.1- and 1.7-fold improvement in the hydrolytic activity towards CMC and Avicel, respectively. In addition, kinetic measurements showed that double mutant had higher substrate affinity (K_m) and a significantly higher catalytic efficiency (k_cat/K_m). The binding isotherms of wild-type EG5C-1 and double mutant D70Q/S235W suggested that the binding capability of EG5C-1 for the insoluble substrate was weaker than that of D70Q/S235W. Molecular dynamics simulations suggested that the collaborative substitutions of D70Q and S235W altered the hydrogen bonding network within the active site architecture and introduced new hydrogen bonds between the enzyme and cellohexaose, thus enhancing both substrate affinity and catalytic efficiency.

Construction of the R17L mutant of MtC1LPMO for improved lignocellulosic biomass conversion by rational point mutation and investigation of the mechanism by molecular dynamics simulations

To enhance the biomass conversion efficiency, the R17L mutant of the lytic polysaccharide monooxygenase (LPMO) MtC1LPMO with improved catalytic efficiency was constructed via rational point mutation based on the HotSpot Wizard 3.0 and dezyme web servers. Compared with the wild-type (WT) MtC1LPMO, R17L exhibited a 1.8-fold increase of specific activity and 1.92-fold increase of catalytic efficiency (k_cat/K_m). The degree of increase of the reducing sugar yield from microcrystalline cellulose and three plant biomass materials during synergistic hydrolysis using cellulase in combination with R17L was about 2 times higher than with the WT. Molecular dynamics simulations revealed that the R17L mutation reduced the stability of the region R18-I36, which then weakened the direct interactions between region N24-V31 and the substrate cellohexaose. Consequently, the deflection time of the cellohexaose conformation in R17L was prolonged compared to the WT, which enhanced its catalytic efficiency.

Role of glycine 256 residue in improving the catalytic efficiency of mutant endoglucanase of family 5 glycoside hydrolase from Bacillus amyloliquefaciens SS35

Wild-type, BaGH5-WT and mutant, BaGH5-UV2 (aspartate residue mutated to glycine), endoglucanases belonging to glycoside hydrolase family 5 (GH5), from wild-type, and UV2 mutant strain of Bacillus amyloliquefaciens SS35, respectively, were earlier cloned in pHTP0 cloning vector. In this study, genes encoding BaGH5-WT or BaGH5-UV2 were cloned into pET28a(+) expression-vector and expressed in Escherichia coli BL-21(DE3)pLysS cells. BaGH5-UV2 showed 10-fold (43.6 U/mg) higher specific activity against carboxymethylcellulose sodium salt (CMC-Na), higher optimal temperature by 10°C at 65°C, and 22-fold higher catalytic efficiency against CMC-Na, than BaGH5-WT. BaGH5-UV2 showed stability in wider acidic pH range (5.0-7.0) unlike BaGH5-WT in narrow basic pH range (7.0-7.5). BaGH5-UV2 displayed a mutation, Asp256Gly in L11 loop, connecting β₆ -sheet with α₆ -helix, near active site toward the domain surface of (α/β)₈ -TIM barrel fold. Molecular dynamics simulation studies showed more stable structure, accessibility of substrate for a catalytic site, and increased flexibility of loop L11 of BaGH5-UV2 than the wild type, suggesting enhanced catalysis by BaGH5-UV2. Molecular docking analysis displayed enhanced hydrogen bond interactions of cello-oligosaccharides with BaGH5-UV2, unlike BaGH5-WT. Thus, Gly256 residue of loop L11 plays an important role in enhancing catalytic efficiency, and pH stability of GH5 endoglucanase. Therefore, these results help in protein engineering of GH5 endoglucanase for improved biochemical properties.

Progress in Ameliorating Beneficial Characteristics of Microbial Cellulases by Genetic Engineering Approaches for Cellulose Saccharification

Lignocellulosic biomass is a renewable and sustainable energy source. Cellulases are the enzymes that cleave β-1, 4-glycosidic linkages in cellulose to liberate sugars that can be fermented to ethanol, butanol, and other products. Low enzyme activity and yield, and thermostability are, however, some of the limitations posing hurdles in saccharification of lignocellulosic residues. Recent advancements in synthetic and systems biology have generated immense interest in metabolic and genetic engineering that has led to the development of sustainable technology for saccharification of lignocellulosics in the last couple of decades. There have been several attempts in applying genetic engineering in the production of a repertoire of cellulases at a low cost with a high biomass saccharification. A diverse range of cellulases are produced by different microbes, some of which are being engineered to evolve robust cellulases. This review summarizes various successful genetic engineering strategies employed for improving cellulase kinetics and cellulolytic efficiency.

Rozhkova A, N. Zorov I, Korotkova O, P. Sinitsyn A, Schwaneberg U, D. Davari M. Engineering Robust Cellulases for Tailored Lignocellulosic Degradation Cocktails

Lignocellulosic biomass is a most promising feedstock in the production of second-generation biofuels. Efficient degradation of lignocellulosic biomass requires a synergistic action of several cellulases and hemicellulases. Cellulases depolymerize cellulose, the main polymer of the lignocellulosic biomass, to its building blocks. The production of cellulase cocktails has been widely explored, however, there are still some main challenges that enzymes need to overcome in order to develop a sustainable production of bioethanol. The main challenges include low activity, product inhibition, and the need to perform fine-tuning of a cellulase cocktail for each type of biomass. Protein engineering and directed evolution are powerful technologies to improve enzyme properties such as increased activity, decreased product inhibition, increased thermal stability, improved performance in non-conventional media, and pH stability, which will lead to a production of more efficient cocktails. In this review, we focus on recent advances in cellulase cocktail production, its current challenges, protein engineering as an efficient strategy to engineer cellulases, and our view on future prospects in the generation of tailored cellulases for biofuel production.

Improvement of the catalytic activity and thermostability of a hyperthermostable endoglucanase by optimizing N-glycosylation sites

BACKGROUND

Endoglucanase has been extensively employed in industrial processes as a key biocatalyst for lignocellulosic biomass degradation. Thermostable endoglucanases with high catalytic activity at elevated temperatures are preferred in industrial use. To improve the activity and thermostability, site-directed mutagenesis was conducted to modify the N-glycosylation sites of the thermostable β-1,4-endoglucanase CTendo45 from Chaetomium thermophilum.

RESULTS

In this study, structure-based rational design was performed based on the modification of N-glycosylation sites in CTendo45. Eight single mutants and one double mutant were constructed and successfully expressed in Pichia pastoris. When the unique N-glycosylation site of N88 was eliminated, a T90A variant was active, and its specific activity towards CMC-Na and β-d-glucan was increased 1.85- and 1.64-fold, respectively. The mutant R67S with an additional N-glycosylation site of N65 showed a distinct enhancement in catalytic efficiency. Moreover, T90A and R67S were endowed with extraordinary heat endurance after 200 min of incubation at different temperatures ranging from 30 to 90 °C. Likewise, the half-lives (t _1/2) indicated that T90A and R67S exhibited improved enzyme thermostability at 80 °C and 90 °C. Notably, the double-mutant T90A/R67S possessed better hydrolysis activity and thermal stability than its single-mutant counterparts and the wild type.

CONCLUSIONS

This study provides initial insight into the biochemical function of N-glycosylation in thermostable endoglucanases. Moreover, the design approach to the optimization of N-glycosylation sites presents an effective and feasible strategy to improve enzymatic activity and thermostability.

Genetically Engineered Proteins to Improve Biomass Conversion: New Advances and Challenges for Tailoring Biocatalysts

Protein engineering emerged as a powerful approach to generate more robust and efficient biocatalysts for bio-based economy applications, an alternative to ecologically toxic chemistries that rely on petroleum. On the quest for environmentally friendly technologies, sustainable and low-cost resources such as lignocellulosic plant-derived biomass are being used for the production of biofuels and fine chemicals. Since most of the enzymes used in the biorefinery industry act in suboptimal conditions, modification of their catalytic properties through protein rational design and in vitro evolution techniques allows the improvement of enzymatic parameters such as specificity, activity, efficiency, secretability, and stability, leading to better yields in the production lines. This review focuses on the current application of protein engineering techniques for improving the catalytic performance of enzymes used to break down lignocellulosic polymers. We discuss the use of both classical and modern methods reported in the literature in the last five years that allowed the boosting of biocatalysts for biomass degradation.

Development of an engineered carbamoyl phosphate synthetase with released sensitivity to feedback inhibition by site-directed mutation and casting error-prone PCR

Carbamoyl phosphate synthetase (CPS) is a key enzyme in both pyrimidine and arginine biosynthesis. However, it is inhibited strongly by uridine monophosphate (UMP), which is an intermediate of the de-novo synthesis of pyrimidine nucleoside. In this study, the native carbamoyl phosphate synthetase, from Escherichia coli, was evolved by site-directed mutation and casting error-prone PCR. Compared with the wild-type, the variant N1015 F had released sensitivity to UMP and exhibited 100% of the initial activity in the presence of UMP. Variant K1006A exhibited 0.14-fold improvement in initial activity and kept above 65% of relative activity under the saturated concentration of inhibitor. Structure analysis of variants demonstrated that the reduced sensitivity to inhibitor was largely attributed to the decreased hydrogen bonds, which could reduce the binding affinity with UMP. Also, Phe with large side chain could narrow the binding pocket and generate more steric hindrance. Based on the results in this study, N1015F was an ideal alternative catalyst for the wild-type CPS for pyrimidine biosynthesis.

Examining the molecular characteristics of glycoside hydrolase family 20 β-N-acetylglucosaminidases with high activity

β-N-Acetylglucosaminidases (GlcNAcases) possess many important biological functions and are used for promising applications that are often hampered by low-activity enzymes. We previously demonstrated that most GlcNAcases of the glycoside hydrolase (GH) family 20 showed higher activities than those of other GH families, and we presented two novel GH 20 GlcNAcases that showed higher activities than most GlcNAcases. A highly flexible structure, which was attributed to the presence of to a high proportion of random coils and flexible amino acid residues, was presumed to be a factor in the high activity of GH 20 GlcNAcases. In this study, we further hypothesized that two special positions might play a key role in catalytic activity. The increase in GH 20 GlcNAcase activity might correspond to the increased structural flexibility and substrate affinity of the two positions due to an increase in random coils and amino acid residues, notably acidic Asp and Glu.

Construction of Novel Aspartokinase Mutant A380I and Its Characterization by Molecular Dynamics Simulation

In this study, a novel monomer aspartokinase (AK) from Corynebacterium pekinense was identified, and its monomer model was constructed. Site 380 was identified by homologous sequencing and monomer model comparison as the key site which was conserved and located around the binding site of the inhibitor Lys. Furthermore, the mutant A380I with enzyme activity 11.32-fold higher than wild type AK (WT-AK), was obtained by site-directed mutagenesis and high throughput screening. In the mutant A380I, the optimal temperature was raised from 26 °C (WT-AK) to 28 °C, the optimal pH remained unchanged at 8.0, and the half-life was prolonged from 4.5 h (WT-AK) to 6.0 h, indicating enhanced thermal stability. The inhibition of A380I was weakened at various inhibitor concentrations and even activated at certain inhibitor concentrations (10 mM of Lys, 5 mM or 10 mM of Lys + Thr, 10 mM of Lys + Met, 5 mM of Lys + Thr + Met). Molecular dynamics simulation results indicated that the occupancy rate of hydrogen bond between A380I and ATP was enhanced, the effect of Lys (inhibitor) on the protein was weakened, and the angle between Ser281-Tyre358 and Asp359-Gly427 was increased after mutation, leading to an open conformation (R-state) that favored the binding of substrate.