A novel FC17/CESA4 mutation causes increased biomass saccharification and lodging resistance by remodeling cell wall in rice

Characterization of Cell Wall Compositions of Sodium Azide-Induced Brittle Mutant Lines in IR64 Variety and Its Potential Application

The rice brittle culm is a cell wall composition changed mutant suitable for studying mechanical strength in rice. However, a thorough investigation of brittle culm has been limited due to the lack of diverse brittle mutants on similar genetic backgrounds in cell walls. In this study, we obtained 45 various brittle mutant lines (BMLs) from the IR64 mutant pool induced by sodium azide mutagenesis using the finger-bending method and texture profile analysis. The first scoring method was established to differentiate the levels of brittleness in rice tissues. The variation of cell wall compositions of BMLs showed that the brittleness in rice primarily correlated with cellulose content supported by high correlation coefficients (R = -0.78) and principal component analysis (PCA = 81.7%). As demonstrated using PCA, lower correlation with brittleness, hemicellulose, lignin, and silica were identified as minor contributors to the overall balance of cell wall compositions and brittleness. The analysis of hydrolysis and feeding indexes highlighted the importance of diversities of brittleness and cell wall compositions of BMLs and their potential applications in ruminant animals and making bioenergy. These results contributed to the comprehension of brittleness and mechanical strength in rice and also extended the applications of rice straw.

Genetic linkage analysis of stable QTLs in Gossypium hirsutum RIL population revealed function of GhCesA4 in fiber development

INTRODUCTION

Upland cotton is an important allotetrapolyploid crop providing natural fibers for textile industry. Under the present high-level breeding and production conditions, further simultaneous improvement of fiber quality and yield is facing unprecedented challenges due to their complex negative correlations.

OBJECTIVES

The study was to adequately identify quantitative trait loci (QTLs) and dissect how they orchestrate the formation of fiber quality and yield.

METHODS

A high-density genetic map (HDGM) based on an intraspecific recombinant inbred line (RIL) population consisting of 231 individuals was used to identify QTLs and QTL clusters of fiber quality and yield traits. The weighted gene correlation network analysis (WGCNA) package in R software was utilized to identify WGCNA network and hub genes related to fiber development. Gene functions were verified via virus-induced gene silencing (VIGS) and clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 strategies.

RESULTS

An HDGM consisting of 8045 markers was constructed spanning 4943.01 cM of cotton genome. A total of 295 QTLs were identified based on multi-environmental phenotypes. Among 139 stable QTLs, including 35 newly identified ones, seventy five were of fiber quality and 64 yield traits. A total of 33 QTL clusters harboring 74 QTLs were identified. Eleven candidate hub genes were identified via WGCNA using genes in all stable QTLs and QTL clusters. The relative expression profiles of these hub genes revealed their correlations with fiber development. VIGS and CRISPR/Cas9 edition revealed that the hub gene cellulose synthase 4 (GhCesA4, GH_D07G2262) positively regulate fiber length and fiber strength formation and negatively lint percentage.

CONCLUSION

Multiple analyses demonstrate that the hub genes harbored in the QTLs orchestrate the fiber development. The hub gene GhCesA4 has opposite pleiotropic effects in regulating trait formation of fiber quality and yield. The results facilitate understanding the genetic basis of negative correlation between cotton fiber quality and yield.

Identification of quantitative trait loci for lodging and related agronomic traits in soybean (Glycine max [L.] Merr.)

BACKGROUND

Lodging, a crucial agronomic trait linked to soybean yield, poses a significant challenge in soybean production. Nevertheless, there has been less research on soybean lodging compared to other important agronomic traits, hindering progress in breeding high-yield soybeans. Our goals were to investigate lodging, pinpoint quantitative trait loci (QTL) linked to lodging, and forecast potential candidate genes linked to this trait. To achieve this, we employed a recombinant inbred line (RIL) population derived from a cross between Guizao 1 and B13 (GB) across various environments.

RESULTS

The lodging score of the RIL population was found to be significantly positively correlated with flowering time, maturity time, plant height, number of main stem nodes, stem diameter, and internode length, with correlation coefficients ranging from 0.457 to 0.783. A total of 84 QTLs associated with soybean lodging and related traits were identified using the GB population. The contribution of phenotypic variance ranged from 1.26 to 66.87%, with LOD scores ranging from 2.52 to 69.22. Additionally, within these QTLs, a stable major QTL associated with lodging was newly discovered in the GB population. Out of the ten major QTLs associated with other related traits, nine of them were situated within the qLD-4-1 interval of the major lodging score locus, displaying phenotypic variations ranging from 12.10 to 66.87%. Specific alterations in gene expression were revealed through the analysis of resequencing data from the two parental lines, potentially indicating their significant roles in lodging. Subsequently, it was determined through qRT-PCR that four genes are likely to be the major genes controlling soybean lodging.

CONCLUSIONS

This study's findings offer valuable insights into the genetic underpinnings of soybean lodging resistance traits. By comprehending the potential genetic factors associated with lodging, this research lays the groundwork for breeding high-yield soybeans with improved lodging resistance.

The DEP1 Mutation Improves Stem Lodging Resistance and Biomass Saccharification by Affecting Cell Wall Biosynthesis in Rice

BACKGROUND

Plant cell walls have evolved precise plasticity in response to environmental stimuli. The plant heterotrimeric G protein complexes could sense and transmit extracellular signals to intracellular signaling systems, and activate a series of downstream responses. dep1 (Dense and Erect Panicles 1), the gain-of-function mutation of DEP1 encoding a G protein γ subunit, confers rice multiple improved agronomic traits. However, the effects of DEP1 on cell wall biosynthesis and wall-related agronomic traits remain largely unknown.

RESULTS

In this study, we showed that the DEP1 mutation affects cell wall biosynthesis, leading to improved lodging resistance and biomass saccharification. The DEP1 is ubiquitously expressed with a relatively higher expression level in tissues rich in cell walls. The CRISPR/Cas9 editing mutants of DEP1 (dep1-cs) displayed a significant enhancement in stem mechanical properties relative to the wild-type, leading to a substantial improvement in lodging resistance. Cell wall analyses showed that the DEP1 mutation increased the contents of cellulose, hemicelluloses, and pectin, and reduced lignin content and cellulose crystallinity (CrI). Additionally, the dep1-cs seedlings exhibited higher sensitivity to cellulose biosynthesis inhibitors, 2,6-Dichlorobenzonitrile (DCB) and isoxaben, compared with the wild-type, confirming the role of DEP1 in cellulose deposition. Moreover, the DEP1 mutation-mediated alterations of cell walls lead to increased enzymatic saccharification of biomass after the alkali pretreatment. Furthermore, the comparative transcriptome analysis revealed that the DEP1 mutation substantially altered expression of genes involved in carbohydrate metabolism, and cell wall biosynthesis.

CONCLUSIONS

Our findings revealed the roles of DEP1 in cell wall biosynthesis, lodging resistance, and biomass saccharification in rice and suggested genetic modification of DEP1 as a potential strategy to develop energy rice varieties with high lodging resistance.

A comprehensive review on genetic modification of plant cell wall for improved saccharification efficiency

The focus is now on harnessing energy from green sources through sustainable technology to minimize environmental pollution. Several crop residues including rice and wheat straw are having enormous potential to be used as lignocellulosic source material for bioenergy production. The lignocellulosic feedstock is primarily composed of cellulose, hemicellulose, and lignin cell wall polymers. The hemicellulose and lignin polymers induce crosslinks in the cell wall, by firmly associating with cellulose microfibrils, and thereby, denying considerable access of cellulose to cellulase enzymes. This issue has been addressed by various researchers through downregulating several genes associated in monolignol biosynthesis in Arabidopsis, Poplar, Rice and Switchgrass to increase ethanol recovery. Similarly, xylan biosynthetic genes are also targeted to genetically culminate its accumulation in the secondary cell walls. Regulation of cellulose synthases (CesA) proves to be an effective tool in addressing the negative impact of these two factors. Modification in the expression of cellulose synthase aids in reducing cellulose crystallinity as well as polymerisation degree which in turn increases ethanol recovery. The engineered bioenergy crops and various fungal strains with state of art biomass processing techniques presents the most recent integrative biotechnology model for cost effective green fuels generation along with production of key value-added products with minuscule disturbances in the environment. Plant breeding strategies utilizing the existing variability for biomass traits will be key in developing dual purpose varieties. For this purpose, reorientation of conventional breeding techniques for incorporating useful biomass traits will be effective.

A gibberellin-deficient maize mutant exhibits altered plant height, stem strength and drought tolerance

KEY MESSAGE

The reduction in endogenous gibberellin improved drought resistance, but decreased cellulose and lignin contents, which made the mutant prone to lodging. It is well known that gibberellin (GA) is a hormone that plays a vital role in plant growth and development. In recent years, a growing number of studies have found that gibberellin plays an important role in regulating the plant height, stem length, and stressed growth surfaces. In this study, a dwarf maize mutant was screened from an EMS-induced mutant library of maize B73. The mutated gene was identified as KS, which encodes an ent-kaurene synthase (KS) enzyme functioning in the early biosynthesis of GA. The mutant was named as ks3-1. A significant decrease in endogenous GA levels was verified in ks3-1. A significantly decreased stem strength of ks3-1, compared with that of wild-type B73, was found. Significant decreases in the cellulose and lignin contents, as well as the number of epidermal cell layers, were further characterized in ks3-1. The expression levels of genes responsible for cellulose and lignin biosynthesis were induced by exogenous GA treatment. Under drought stress conditions, the survival rate of ks3-1 was significantly higher than that of the wild-type B73. The survival rates of both wild-type B73 and ks3-1 decreased significantly after exogenous GA treatment. In conclusion, we summarized that a decreased level of GA in ks3-1 caused a decreased plant height, a decreased stem strength as a result of cell wall defects, and an increased drought tolerance. Our results shed light on the importance of GA and GA-defective mutants in the genetic improvement of maize and breeding maize varieties.

The Fragile culm19 (FC19) mutation largely improves plant lodging resistance, biomass saccharification, and cadmium resistance by remodeling cell walls in rice

Cell wall is essential for plant upright growth, biomass saccharification, and stress resistance. Although cell wall modification is suggested as an effective means to increase biomass saccharification, it is a challenge to maintain normal plant growth with improved mechanical strength and stress resistance. Here, we reported two independent fragile culm mutants, fc19-1 and fc19-2, resulting from novel mutations of OsIRX10, produced by the CRISPR/Cas9 system. Compared to wild-type, the two mutants exhibited reduced contents of xylose, hemicellulose, and cellulose, and increased arabinose and lignin without significant alteration in levels of pectin and uronic acids. Despite brittleness, the mutants displayed increased breaking force, leading to improved lodging resistance. Furthermore, the altered cell wall and increased biomass porosity in fc19 largely increased biomass saccharification. Notably, the mutants showed enhanced cadmium (Cd) resistance with lower Cd accumulation in roots and shoots. The FC19 mutation impacts transcriptional levels of key genes contributing to Cd uptake, sequestration, and translocation. Moreover, transcriptome analysis revealed that the FC19 mutation resulted in alterations of genes mainly involved in carbohydrate and phenylpropanoid metabolism. Therefore, a hypothetic model was proposed to elucidate that the FC19 mutation-mediated cell wall remodeling leads to improvements in lodging resistance, biomass saccharification, and Cd resistance.

Biochar application enhanced rice biomass production and lodging resistance via promoting co-deposition of silica with hemicellulose and lignin

Biochar, an environmentally friendly soil amendment, is created via a series of thermochemical processes from carbon-rich organic matter. The biochar addition enhances soil characteristics dramatically and increases crop growth and yields. However, the mechanism by which biochar improves plant lodging resistance, which is heavily influenced by cell walls, remains unknown. Three rice cultivars were grown in an experimental field provided with four concentrations of biochar (10, 20, 30, 40 t ha^-1). The biochar application enhanced biomass production and lodging resistance in all three cultivars by up to 29 % and 22 %, respectively, with the largest improvement at a biochar application rate of 30 t ha^-1. Biochar application significantly enhanced stem cell wall-related characteristics, with an increase in stem breaking force, wall thickness, and plumpness of 52 %, 32 %, and 21 %, respectively, which are suggested to be major contributors to enhanced lodging resistance and biomass yield. Notably, cell wall composition and silica content analysis indicated a significant increase in hemicellulose, lignin, and silica content in biochar-treated samples up to 36 %, 13 %, and 58 %, respectively, when compared to plants not treated with biochar. Integrative analysis suggested that silica, hemicellulose, and lignin were co-deposited in cell walls, which influenced biomass production and lodging resistance. Furthermore, the transcriptome profile revealed that biochar application increased the expression of genes involved in biomass production, cell wall formation, and silica deposition. This study suggests that biochar application might improve both biomass production and lodging resistance by promoting the co-deposition of silicon with hemicellulose and lignin in cell walls.

Isolation of a Novel QTL, qSCM4, Associated with Strong Culm Affects Lodging Resistance and Panicle Branch Number in Rice

Rice breeders are now developing new varieties with semi-high or even high plant height to further increase the grain yield, and the problem of lodging has re-appeared. We identified a major quantitative trait locus (QTL), qSCM4, for resistance to lodging by using an F₂ segregant population and a recombinant self-incompatible line population from the cross between Shennong265 (SN265) and Lijiangxintuanheigu (LTH) after multiple years and multiple environments. Then, the residual heterozygous derived segregant population which consisted of 1781 individual plants, and the BC₃F₂ segregant population which consisted of 3216 individual plants, were used to shorten the physical interval of qSCM4 to 58.5 kb including 11 genes. DNA sequencing revealed the most likely candidate gene for qSCM4 was Os04g0615000, which encoded a functional protein with structural domains of serine and cysteine. There were 13 DNA sequence changes in LTH compared to SN265 in this gene, including a fragment deletion, two base changes in the 3' UTR region, six base changes in the exons, and four base changes in the introns. A near-isogenic line carrying qSCM4 showed that it improved the lodging resistance through increasing stem thickness by 25.3% and increasing stem folding resistance by 20.3%. Furthermore, it was also discovered that qSCM4 enhanced the primary branch per panicle by 16.7%, secondary branch by per panicle 9.9%, and grain number per panicle by 14.7%. All the above results will give us a valuable genetic resource for concurrently boosting culm strength and lodging resistance, and they will also provide a basis for further research on the lodging resistance mechanism of rice.

Brittle culm 3, encoding a cellulose synthase subunit 5, is required for cell wall biosynthesis in barley (Hordeum vulgare L.)

The cell wall plays an important role in plant mechanical strength. Cellulose is the major component of plant cell walls and provides the most abundant renewable biomass resource for biofuels on earth. Mutational analysis showed that cellulose synthase (CESA) genes are critical in cell wall biosynthesis in cereal crops like rice. However, their role has not been fully elucidated in barley. In this study, we isolated a brittle culm mutant brittle culm 3 (bc3) derived from Yangnongpi 5 ethyl methanesulfonate (EMS) mutagenesis in barley. The bc3 mutants exhibited reduced mechanical strength of the culms due to impaired thickening of the sclerenchyma cell wall and reduced cellulose and hemicellulose content in the culms. Genetic analysis and map-based cloning revealed that the bc3 mutant was controlled by a single recessive gene and harbored a point mutation in the HvCESA5 gene, generating a premature stop codon near the N-terminal of the protein. Quantitative real-time PCR (qRT-PCR) analysis showed that the HvCESA5 gene is predominantly expressed in the culms and co-expressed with HvCESA4 and HvCESA8, consistent with the brittle culm phenotype of the bc3 mutant. These results indicate that the truncated HvCESA5 affects cell wall biosynthesis leading to a brittle culm phenotype. Our findings provide evidence for the important role of HvCESA5 in cell wall biosynthesis pathway and could be a potential target to modify cell wall in barley.

ETHYLENE RESPONSE FACTOR 34 promotes secondary cell wall thickening and strength of rice peduncles

Cellulose and lignin are critical cell wall components for plant morphogenesis and adaptation to environmental conditions. The cytoskeleton supports cell wall deposition, but much of the underpinning regulatory components remain unknown. Here, we show that an APETALA2/ETHYLENE RESPONSE FACTOR (ERF) family transcription factor, OsERF34, directly promotes the expression of the actin- and microtubule-binding protein Rice Morphology Determinant (RMD) in rice (Oryza sativa) peduncles. OsERF34 and RMD are highly expressed in sclerenchymatous peduncle cells that are fortified by thick secondary cell walls (SCWs) that provide mechanical peduncle strength. erf34 and rmd-1 mutants contained lower cellulose and lignin contents and thinner SCWs, while ERF34 over-expressing (OE) lines maintained high cellulose and lignin content with thicker SCWs. These characteristics impacted peduncle mechanical strength, that is, reduced strength in erf34 and rmd-1 and increased strength of ERF34 OE plants. Taken together, our results demonstrate that the OsERF34-RMD cascade positively regulates SCW synthesis and mechanical strength in rice peduncles, which is important for yield, and provide a potential guide for improved peduncle breeding efforts in rice.

CEF3 is involved in membrane trafficking and essential for secondary cell wall biosynthesis and its mutation enhanced biomass enzymatic saccharification in rice

Background

As one of the most important staple food crops, rice produces large of agronomic biomass residues that contain lots of secondary cell walls (SCWs). Membrane trafficking plays key roles in SCWs biosynthesis, but information association membrane trafficking and SCWs formation in plants is limited.

Results

In this study, we report the function characterization of a rice mutant, culm easily fragile 3 (cef3), that exhibits growth retardation and fragile culm phenotype with significantly altered cell wall composition and reduced secondary wall thickness. Map-based cloning revealed that CEF3 encodes a homologous protein of Arabidopsis STOMATAL CYTOKINESIS DEFECTIVE2 (SCD2). The saccharification assays revealed that CEF3 mutation can improve biomass enzymatic saccharification. Expression pattern analysis indicated that CEF3 is ubiquitously expressed in many organs at different developmental stages. Subcellular localization revealed that CEF3 is a Golgi-localized protein. The FM4-64 uptake assay revealed CEF3 is involved in endocytosis. Furthermore, mutation of CEF3 not only affected cellulose synthesis-related genes expression, but also altered the abundance of cellulose synthase catalytic subunit 9 (OsCESA9) in the PM and in the endomembrane systems.

Conclusions

This study has demonstrated that CEF3 participates in the membrane trafficking that is essential for normal cellulose and other polysaccharides biosynthesis of the secondary cell wall, thereby manipulation of CEF3 could alter cellulose content and enhance biomass enzymatic saccharification in rice plants. Therefore, the study of the function of CEF3 can provide a strategy for genetic modification of SCWs in bioenergy crops.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13068-022-02205-y.

OsUGE3-mediated cell wall polysaccharides accumulation improves biomass production, mechanical strength, and salt tolerance

Cell walls constitute the majority of plant biomass and are essential for plant resistance to environmental stresses. It is promising to improve both plant biomass production and stress resistance simultaneously by genetic modification of cell walls. Here, we report the functions of a UDP-galactose/glucose epimerase 3 (OsUGE3) in rice growth and salt tolerance by characterizing its overexpressing plants (OsUGE3-OX) and loss-of-function mutants (uge3). The OsUGE3-OX plants showed improvements in biomass production and mechanical strength, whereas uge3 mutants displayed growth defects. The OsUGE3 exhibits UDP-galactose/glucose epimerase activity that provides substrates for polysaccharides polymerization, consistent with the increased biosynthesis of cellulose and hemicelluloses and strengthened walls in OsUGE3-OX plants. Notably, the OsUGE3 is ubiquitously expressed and induced by salt treatment. The uge3 mutants were hypersensitive to salt and osmotic stresses, whereas the OsUGE3-OX plants showed improved tolerance to salt and osmotic stresses. Moreover, OsUGE3 overexpression improves the homeostasis of Na⁺ and K⁺ and induces a higher accumulation of hemicelluloses and soluble sugars during salt stress. Our results suggest that OsUGE3 improves biomass production, mechanical strength, and salt stress tolerance by reinforcement of cell walls with polysaccharides and it could be targeted for genetic modification to improve rice growth under salt stress.

FRAGILE CULM 18 encodes a UDP-glucuronic acid decarboxylase required for xylan biosynthesis and plant growth in rice

Although UDP-glucuronic acid decarboxylases (UXSs) have been well studied with regard to catalysing the conversion of UDP-glucuronic acid into UDP-xylose, their biological roles in grasses remain largely unknown. The rice (Oryza sativa) genome contains six UXSs, but none of them has been genetically characterized. Here, we reported on the characterization of a novel rice fragile culm mutant, fc18, which exhibited brittleness with altered cell wall and pleiotropic defects in growth. Map-based cloning and transgenic analyses revealed that the FC18 gene encodes a cytosol-localized OsUXS3 and is widely expressed with higher expression in xylan-rich tissues. Monosaccharide analysis showed that the xylose level was decreased in fc18, and cell wall fraction determinations confirmed that the xylan content in fc18 was lower, suggesting that UDP-xylose from FC18 participates in xylan biosynthesis. Moreover, the fc18 mutant displayed defective cellulose properties, which led to an enhancement in biomass saccharification. Furthermore, expression of genes involved in sugar metabolism and phytohormone signal transduction was largely altered in fc18. Consistent with this, the fc18 mutant exhibited significantly reduced free auxin (indole-3-acetic acid) content and lower expression levels of PIN family genes compared with wild type. Our work reveals the physiological roles of FC18/UXS3 in xylan biosynthesis, cellulose deposition, and plant growth in rice.

Identification and Fine Mapping of the Recessive Gene BK-5, Which Affects Cell Wall Biosynthesis and Plant Brittleness in Maize

The cellulose of the plant cell wall indirectly affects the cell shape and straw stiffness of the plant. Here, the novel brittleness mutant brittle stalk-5 (bk-5) of the maize inbred line RP125 was characterized. We found that the mutant displayed brittleness of the stalk and even the whole plant, and that the brittleness phenotype existed during the whole growth period from germination to senescence. The compressive strength was reduced, the cell wall was thinner, and the cellulose content was decreased compared to that of the wild type. Genetic analysis and map-based cloning indicated that bk-5 was controlled by a single recessive nuclear gene and that it was located in a 90.2-Kb region on chromosome 3 that covers three open reading frames (ORFs). Sequence analysis revealed a single non-synonymous missense mutation, T-to-A, in the last exon of Zm00001d043477 (B73: version 4, named BK-5) that caused the 951th amino acid to go from leucine to histidine. BK-5 encodes a cellulose synthase catalytic subunit (CesA), which is involved with cellulose synthesis. We found that BK-5 was constitutively expressed in all tissues of the germinating stage and silking stage, and highly expressed in the leaf, auricula, and root of the silking stage and the 2-cm root and bud of the germinating stage. We found that BK-5 mainly localized to the Golgi apparatus, suggesting that the protein might move to the plasma membrane with the aid of Golgi in maize. According to RNA-seq data, bk-5 had more downregulated genes than upregulated genes, and many of the downregulated genes were enzymes and transcription factors related to cellulose, hemicellulose, and lignin biosynthesis of the secondary cell wall. The other differentially expressed genes were related to metabolic and cellular processes, and were significantly enriched in hormone signal transduction, starch and sucrose metabolism, and the plant-pathogen interaction pathway. Taken together, we propose that the mutation of gene BK-5 causes the brittle stalk phenotype and provides important insights into the regulatory mechanism of cellulose biosynthesis and cell wall development in maize.

Rice Brittle Culm19 Encoding Cellulose Synthase Subunit CESA4 Causes Dominant Brittle Phenotype But has No Distinct Influence on Growth and Grain Yield

BACKGROUND

Mechanical strength is a crucial agronomic trait in rice (Oryza sativa), and brittle mutants are thought suitable materials to investigate the mechanism of cell wall formation. So far, almost all brittle mutants are recessive, and most of them are defected in multiple morphologies and/or grain yield, limiting their application in hybrid breeding and in rice straw recycling.

RESULTS

We identified a semi-dominant brittle mutant Brittle culm19 (Bc19) isolated from the japonica variety Nipponbare through chemical mutagenesis. The mutant showed the same apparent morphologies and grain yield to the wild type plant except for its weak mechanical strength. Its development of secondary cell wall in sclerenchyma cells was affected, along with reduced contents of cellulose, hemicellulose, lignin and sugars in culms and leaves. Positional cloning suggested that the Bc19 gene was allelic to OsCESA4, encoding one of the cellulose synthase A (CESA) catalytic subunits. In this mutant, a C-to-T substitution occurred in the coding sequence of BC19, causing the P507S missense mutation in its encoded product, which was located in the second cytoplasmic region of the OsCESA4 protein. Furthermore, introducing mutant gene Bc19 into the wild-type plant resulted in brittle plants, confirming that the P507S point mutation in OsCESA4 protein was responsible for the semi-dominant brittle phenotype of Bc19 mutant. Reverse correlation was revealed between cellulose contents and expression levels of mutant gene Bc19 among the homozygous mutant, the hybrid F₁ plant, and the Bc19 overexpression transgenic plants, implying that gene Bc19 might affect cellulose synthesis in a dosage-dependent manner.

CONCLUSIONS

Bc19, a semi-dominant brittle mutant allele of gene OsCESA4, was identified using map-based cloning approach. The mutated protein of Bc19 possessing the P507S missense mutation behaved in a dosage-dependent semi-dominant manner. Unique brittle effect on phenotype and semi-dominant genetic quality of gene Bc19 indicated its potential application in grain-straw dual-purpose hybrid rice breeding.

Unveiling the transcriptomic complexity of Miscanthus sinensis using a combination of PacBio long read- and Illumina short read sequencing platforms

Background

Miscanthus sinensis Andersson is a perennial grass that exhibits remarkable lignocellulose characteristics suitable for sustainable bioenergy production. However, knowledge of the genetic resources of this species is relatively limited, which considerably hampers further work on its biology and genetic improvement.

Results

In this study, through analyzing the transcriptome of mixed samples of leaves and stems using the latest PacBio Iso-Seq sequencing technology combined with Illumina HiSeq, we report the first full-length transcriptome dataset of M. sinensis with a total of 58.21 Gb clean data. An average of 15.75 Gb clean reads of each sample were obtained from the PacBio Iso-Seq system, which doubled the data size (6.68 Gb) obtained from the Illumina HiSeq platform. The integrated analyses of PacBio- and Illumina-based transcriptomic data uncovered 408,801 non-redundant transcripts with an average length of 1,685 bp. Of those, 189,406 transcripts were commonly identified by both methods, 169,149 transcripts with an average length of 619 bp were uniquely identified by Illumina HiSeq, and 51,246 transcripts with an average length of 2,535 bp were uniquely identified by PacBio Iso-Seq. Approximately 96 % of the final combined transcripts were mapped back to the Miscanthus genome, reflecting the high quality and coverage of our sequencing results. When comparing our data with genomes of four species of Andropogoneae, M. sinensis showed the closest relationship with sugarcane with up to 93 % mapping ratios, followed by sorghum with up to 80 % mapping ratios, indicating a high conservation of orthologs in these three genomes. Furthermore, 306,228 transcripts were successfully annotated against public databases including cell wall related genes and transcript factor families, thus providing many new insights into gene functions. The PacBio Iso-Seq data also helped identify 3,898 alternative splicing events and 2,963 annotated AS isoforms within 10 function categories.

Conclusions

Taken together, the present study provides a rich data set of full-length transcripts that greatly enriches our understanding of M. sinensis transcriptomic resources, thus facilitating further genetic improvement and molecular studies of the Miscanthus species.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-021-07971-x.

Updating Insights into the Catalytic Domain Properties of Plant Cellulose synthase (CesA) and Cellulose synthase-like (Csl) Proteins

The wall is the last frontier of a plant cell involved in modulating growth, development and defense against biotic stresses. Cellulose and additional polysaccharides of plant cell walls are the most abundant biopolymers on earth, having increased in economic value and thereby attracted significant interest in biotechnology. Cellulose biosynthesis constitutes a highly complicated process relying on the formation of cellulose synthase complexes. Cellulose synthase (CesA) and Cellulose synthase-like (Csl) genes encode enzymes that synthesize cellulose and most hemicellulosic polysaccharides. Arabidopsis and rice are invaluable genetic models and reliable representatives of land plants to comprehend cell wall synthesis. During the past two decades, enormous research progress has been made to understand the mechanisms of cellulose synthesis and construction of the plant cell wall. A plethora of cesa and csl mutants have been characterized, providing functional insights into individual protein isoforms. Recent structural studies have uncovered the mode of CesA assembly and the dynamics of cellulose production. Genetics and structural biology have generated new knowledge and have accelerated the pace of discovery in this field, ultimately opening perspectives towards cellulose synthesis manipulation. This review provides an overview of the major breakthroughs gathering previous and recent genetic and structural advancements, focusing on the function of CesA and Csl catalytic domain in plants.

A Semi-Dominant Mutation in OsCESA9 Improves Salt Tolerance and Favors Field Straw Decay Traits by Altering Cell Wall Properties in Rice

BACKGROUND

Cellulose synthase (CESA) mutants have potential use in straw processing due to their lower cellulose content, but almost all of the mutants exhibit defective phenotypes in plant growth and development. Balancing normal plant growth with reduced cellulose content remains a challenge, as cellulose content and normal plant growth are typically negatively correlated with one another.

RESULT

Here, the rice (Oryza sativa) semi-dominant brittle culm (sdbc) mutant Sdbc1, which harbors a substitution (D387N) at the first conserved aspartic acid residue of OsCESA9, exhibits lower cellulose content and reduced secondary wall thickness as well as enhanced biomass enzymatic saccharification compared with the wild type (WT). Further experiments indicated that the OsCESA9^D387N mutation may compete with the wild-type OsCESA9 for interacting with OsCESA4 and OsCESA7, further forming non-functional or partially functional CSCs. The OsCESA9/OsCESA9^D387N heterozygous plants increase salt tolerance through scavenging and detoxification of ROS and indirectly affecting related gene expression. They also improve rice straw return to the field due to their brittle culms and lower cellulose content without any negative effects in grain yield and lodging.

CONCLUSION

Hence, OsCESA9^D387N allele can improve rice salt tolerance and provide the prospect of the rice straw for biofuels and bioproducts due to its improved enzymatic saccharification.

Overexpression of ZePrx in Nicotiana tabacum Affects Lignin Biosynthesis Without Altering Redox Homeostasis

Class III plant peroxidases (Prxs) are involved in the oxidative polymerization of lignins. Zinnia elegans Jacq. Basic peroxidase (ZePrx) has been previously characterized as capable of catalyzing this reaction in vitro and the role in lignin biosynthesis of several of its Arabidopsis thaliana homologous has been previously confirmed. In the present work, ZePrx was overexpressed in Nicotiana tabacum to further characterize its function in planta with particular attention to its involvement in lignin biosynthesis. Since Prxs are known to alter ROS levels by using them as electron acceptor or producing them in their catalytic activity, the impact of this overexpression in redox homeostasis was studied by analyzing the metabolites and enzymes of the ascorbate-glutathione cycle. In relation to the modification induced by ZePrx overexpression in lignin composition and cellular metabolism, the carbohydrate composition of the cell wall as well as overall gene expression through RNA-Seq were analyzed. The obtained results indicate that the overexpression of ZePrx caused an increase in syringyl lignin in cell wall stems, suggesting that ZePrx is relevant for the oxidation of sinapyl alcohol during lignin biosynthesis, coherently with its S-peroxidase nature. The increase in the glucose content of the cell wall and the reduction of the expression of several genes involved in secondary cell wall biosynthesis suggests the occurrence of a possible compensatory response to maintain cell wall properties. The perturbation of cellular redox homeostasis occurring as a consequence of ZePrx overexpression was kept under control by an increase in APX activity and a reduction in ascorbate redox state. In conclusion, our results confirm the role of ZePrx in lignin biosynthesis and highlight that its activity alters cellular pathways putatively aimed at maintaining redox homeostasis.

The Rice BZ1 Locus Is Required for Glycosylation of Arabinogalactan Proteins and Galactolipid and Plays a Role in both Mechanical Strength and Leaf Color

BACKGROUND

The cell wall and chloroplast are two fundamental structures determining plant mechanical strength and grain yield. Therefore, understanding mechanisms that improve plants' ability to develop a robust cell wall and well-developed chloroplast is of utmost importance for agricultural activities.

RESULTS

In this study, we report the functional characterization of a novel rice mutant, brittle stem and zebra leaf (bz1), which displays altered cell wall composition and collapsed chloroplast membrane. Molecular and biochemical analysis revealed that BZ1 encodes a functional UDP-galactose/glucose epimerase (UGE) and is ubiquitously expressed with higher expression in stem and leaf tissues. Multiple techniques analyses, including immunoblots, immuno-gold, and cryogenic scanning electron microscopy, demonstrated a significantly impaired glycosylation of arabinogalactan proteins (AGPs) and disordered cellulose microfibril deposition in bz1. Lipid profiling assay showed that the amount of monogalactosyldiacylglycerols (MGDG), a major chloroplast membrane glycolipid, was significantly decreased in bz1. Taken together, these results strongly demonstrate that BZ1 participates in UDP-galactose supply for the sugar chains biosynthesis of AGPs and MGDG, which thereby, respectively, results in altered cell wall and abnormal chloroplast development. Due to inferior mechanical strength and reduced photosynthesis, bz1 plants displayed detrimental agronomic traits, whereas BZ1 overexpressing lines showed enhanced plant growth. Transcriptome analysis of stems and leaves further showed that numerous key genes involved in AGPs biosynthesis and photosynthesis metabolism were substantially suppressed in bz1.

CONCLUSIONS

Our finding identifies BZ1 as a dual-targeting UGE protein for glycosylation of AGPs and MGDG and suggests a strategy for breeding robust elite crops.

Mechanical stimulation in Brachypodium distachyon: Implications for fitness, productivity, and cell wall properties

Mechanical stimulation, including exposure to wind, is a common environmental variable for plants. However, knowledge about the morphogenetic response of the grasses (Poaceae) to mechanical stimulation and impact on relevant agronomic traits is very limited. Two natural accessions of Brachypodium distachyon were exposed to wind and mechanical treatments. We surveyed a wide range of stem-related traits to determine the effect of the two treatments on plant growth, development, and stem biomass properties. Both treatments induced significant quantitative changes across multiple scales, from the whole plant down to cellular level. The two treatments resulted in shorter stems, reduced biomass, increased tissue rigidity, delayed flowering, and reduced seed yield in both accessions. Among changes in cell wall-related features, a substantial increase in lignin content and pectin methylesterase activity was most notable. Mechanical stimulation also reduced the enzymatic sugar release from the cell wall, thus increasing biomass recalcitrance. Notably, treatments had a distinct and opposite effect on vascular bundle area in the two accessions, suggesting genetic variation in modulating these responses to mechanical stimulation. Our findings highlight that exposure of grasses to mechanical stimulation is a relevant environmental factor affecting multiple traits important for their utilization in food, feed, and bioenergy applications.