Nanofibrillar cellulose wound dressing supports the growth and characteristics of human mesenchymal stem/stromal cells without cell adhesion coatings

Stem Cells and Nanofibers for Skin Regeneration and Wound Healing

Stem cells have been attractive targets for tissue regeneration due to their inherent ability to differentiate into various specialized cell types; however, efforts for stem cell transplantation for the treatment of degenerated tissues have been hampered by the propensity of some stem cell types to form teratomas and the lessened viability of stem cells after transplantation. These disadvantages can be prevented using tailored extracellular matrix-like materials that can be used as an aid for the transplantation of stem cells. Nanomaterials, in particular nanofibers, have great potential to be used as extracellular matrix-like materials for this purpose. In this article, we will review the use of stem cells and nanofibers for skin regeneration and wound healing.

Insights into spheroids formation in cellulose nanofibrils and Matrigel hydrogels using AFM-based techniques

The recent FDA decision to eliminate animal testing requirements emphasises the role of cell models, such as spheroids, as regulatory test alternatives for investigations of cellular behaviour, drug responses, and disease modelling. The influence of environment on spheroid formation are incompletely understood, leading to uncertainty in matrix selection for scaffold-based 3D culture. This study uses atomic force microscopy-based techniques to quantify cell adhesion to Matrigel and cellulose nanofibrils (CNF), and cell-cell adhesion forces, and their role in spheroid formation of hepatocellular carcinoma (HepG2) and induced pluripotent stem cells (iPS(IMR90)-4). Results showed different cell behaviour in CNF and Matrigel cultures. Both cell lines formed compact spheroids in CNF but loose cell aggregates in Matrigel. Interestingly, the type of cell adhesion protein, and not the bond strength, appeared to be a key factor in the formation of compact spheroids. The gene expression of E- and N-cadherins, proteins on cell membrane responsible for cell-cell interactions, was increased in CNF culture, leading to formation of compact spheroids while Matrigel culture induced integrin-laminin binding and downregulated E-cadherin expression, resulting in looser cell aggregates. These findings enhance our understanding of cell-biomaterial interactions in 3D cultures and offer insights for improved 3D cell models, culture biomaterials, and applications in drug research.

Willow Bark-Derived Material with Antibacterial and Antibiofilm Properties for Potential Wound Dressing Applications

Tree stems contain wood in addition to 10-20% bark, which remains one of the largest underutilized biomasses on earth. Unique macromolecules (like lignin, suberin, pectin, and tannin), extractives, and sclerenchyma fibers form the main part of the bark. Here, we perform detailed investigation of antibacterial and antibiofilm properties of bark-derived fiber bundles and discuss their potential application as wound dressing for treatment of infected chronic wounds. We show that the yarns containing at least 50% of willow bark fiber bundles significantly inhibit biofilm formation by wound-isolated Staphylococcus aureus strains. We then correlate antibacterial effects of the material to its chemical composition. Lignin plays the major role in antibacterial activity against planktonic bacteria [i.e., minimum inhibitory concentration (MIC) 1.25 mg/mL]. Acetone extract (unsaturated fatty acid-enriched) and tannin-like (dicarboxylic acid-enriched) substances inhibit both bacterial planktonic growth [MIC 1 and 3 mg/mL, respectively] and biofilm formation. The yarn lost its antibacterial activity once its surface lignin reached 20.1%, based on X-ray photoelectron spectroscopy. The proportion of fiber bundles at the fabricated yarn correlates positively with its surface lignin. Overall, this study paves the way to the use of bark-derived fiber bundles as a natural-based material for active (antibacterial and antibiofilm) wound dressings, upgrading this underappreciated bark residue from an energy source into high-value pharmaceutical use.

Cellulose based biopolymer nanoscaffold: A possible biomedical applications

In this work, a combination of cellulose nanofiber (CNF), coffee beans powder (CBP), and reduced graphene oxide (rGO) are used to design a nanowound dressing sheet (Nano-WDS), by vacuum pressure, for their sustained application in wound healing. Nano-WDS was analysed for its mechanical, antimicrobial, biocompatibility, etc., The Nano-WDS had favourable results of the tensile strength (12.85 ± 0.10 MPa), elongation at break (09.45 ± 0.28 %), water absorption (31.14 ± 0.04 %), and thickness (00.76 ± 0.02 mm). The biocompatibility study of Nano-WDS was analysed using human keratinocyte cell line (HaCaT), which showed excellent cell growth. The antibacterial activity was reflected in the Nano-WDS against the E.coli and S.aureus bacteria. Cellulose comprises the glucose unit and reduced graphene oxides are combined to create macromolecular interaction. The surface activity of cellulose-formed nanowound dressing sheet demonstrates a wound tissue engineering application. Based on the result of the study was proved suitable for bioactive wound dressing applications. The research proves that these Nano-WDS could be successfully used for the production of wound healing materials.

Plant-Derived Biomaterials and Their Potential in Cardiac Tissue Repair

Cardiovascular disease remains the leading cause of mortality worldwide. The inability of cardiac tissue to regenerate after an infarction results in scar tissue formation, leading to cardiac dysfunction. Therefore, cardiac repair has always been a popular research topic. Recent advances in tissue engineering and regenerative medicine offer promising solutions combining stem cells and biomaterials to construct tissue substitutes that could have functions similar to healthy cardiac tissue. Among these biomaterials, plant-derived biomaterials show great promise in supporting cell growth due to their inherent biocompatibility, biodegradability, and mechanical stability. More importantly, plant-derived materials have reduced immunogenic properties compared to popular animal-derived materials (e.g., collagen and gelatin). In addition, they also offer improved wettability compared to synthetic materials. To date, limited literature is available to systemically summarize the progression of plant-derived biomaterials in cardiac tissue repair. Herein, this paper highlights the most common plant-derived biomaterials from both land and marine plants. The beneficial properties of these materials for tissue repair are further discussed. More importantly, the applications of plant-derived biomaterials in cardiac tissue engineering, including tissue-engineered scaffolds, bioink in 3D biofabrication, delivery vehicles, and bioactive molecules, are also summarized using the latest preclinical and clinical examples.

Natural Polymer-Based Thin Film Strategies for Skin Regeneration in Lieu of Regenerative Dentistry

Wound healing (WH) is a complex and dynamic process that comprises of a series of molecular and cellular events that occur after tissue injury. The injuries of the maxillofacial and oral region caused by trauma or surgery result in undesirable WH such as delayed wound closure and formation of scar tissue. Skin tissue engineering (TE)/regeneration is an emerging approach toward faster, superior, and more effective resolution of clinically significant wounds effectively. A multitude of TE principles approaches are being put to action for the fabrication of hydrogels, electrospun sheets, 3D scaffolds, and thin films that can be used as wound dressings materials, sutures, or skin substitutes. Thin films are advantageous over other materials owing to their flexibility, ability to provide a barrier against external contamination, easy gaseous exchange, and easy monitoring of wounds. This review focuses on wound-dressing films and their significance and discusses various fabrication techniques. In addition, we explore various natural biopolymers that can be used for fabrication of skin TE materials. Impact Statement In this review article, critical evaluations of natural polymers used in skin regeneration were discussed. Further, the fabrication technology of the 2D and 3D material in wound healing were discussed.

Angiogenic Potential of Human Adipose-Derived Mesenchymal Stromal Cells in Nanofibrillated Cellulose Hydrogel

Adipose-derived mesenchymal stromal cells (ASCs) hold great potential for cellular therapies by having immunomodulatory behavior and tissue regenerative properties. Due to the capability of ASCs to differentiate into endothelial cells (ECs) and other angiogenic cell types, such as pericytes, ASCs are a highly valuable source for stimulating angiogenesis. However, cellular therapies in tissue engineering have faced challenges in poor survival of the cells after transplantation, which is why a protective biomaterial scaffold is required. In this work, we studied the potential of nanofibrillated cellulose (NFC) hydrogel to be utilized as a suitable matrix for three-dimensional (3D) cell culturing of human-derived ASCs (hASCs) and studied their angiogenic properties and differentiation potential in ECs and pericytes. In addition, we tested the effect of hASC-conditioned medium and stimulation with angiopoietin-1 (Ang-1) on human umbilical vein endothelial cells (HUVECs) to induce blood vessel-type tube formation in NFC hydrogel. The hASCs were successfully 3D cell cultured in NFC hydrogel as they formed spheroids and had high cell viability with angiogenic features. Most importantly, they showed angiogenic potential by having pericyte-like characteristics when differentiated in EC medium, and their conditioned medium improved HUVEC viability and tube formation, which recalls the active paracrine properties. This study recommends NFC hydrogel for future use as an animal-free biomaterial scaffold for hASCs in therapeutic angiogenesis and other cell therapy purposes.

Fat obtained from plastic surgery procedures—stem cells derived from adipose tissue and their potential in technological innovation: a narrative literature review and perspective on dissociative methods

Background

Throughout its illustrious history, plastic surgery has searched for novel regenerative therapies and procedures. Recently, interest has emerged in using adipose tissue-derived stem cells (ASCs) in an ethical, easy, and reproducible manner. ASCs are generally not administered alone but as a constituent of the stromal vascular fraction (SVF) in clinical practice. Herein, we searched for innovative fat collection and ASC isolation technologies and applications and evaluated each study’s relevance to plastic surgery.

Methods

A narrative literature review was carried out using the MEDLINE/PubMed databases. Studies published from January 1993 to August 2020 and written in English, Portuguese, or Spanish were considered.

Results

The selection process yielded 33 articles for subsequent review, involving exploratory, selective, and interpretive reading, material choice, and text analysis. Twenty-three articles employed enzymatic dissociation methods to isolate ASCs, and 25 employed liposuction as the plastic surgery technique. Moreover, articles describing new devices (n = 2), techniques (n = 4), computational models (n = 1), tissue scaffolds (n = 21), and therapies and/or treatments (n = 5) were identified.

Conclusions

Given the importance of fat tissue for plastic surgery purposes, innovative ASC isolation and liposuction technologies could change how the surgeon conducts surgeries and improve surgical outcomes. Furthermore, many articles investigating tissue scaffolds demonstrate the importance of this area of research and development in plastic surgery and regenerative medicine. Continued efforts in the identified research areas will eventually bring in vivo human plastic surgery applications and regenerative medicine into the operating room. Level of evidence: Not gradable.

Preservation of biomaterials and cells by freeze-drying: Change of paradigm

Freeze-drying is the most widespread method to preserve protein drugs and vaccines in a dry form facilitating their storage and transportation without the laborious and expensive cold chain. Extending this method for the preservation of natural biomaterials and cells in a dry form would provide similar benefits, but most results in the domain are still below expectations. In this review, rather than consider freeze-drying as a traditional black box we "break it" through a detailed process thinking approach. We discuss freeze-drying from process thinking aspects, introduce the chemical, physical, and mechanical environments important in this process, and present advanced biophotonic process analytical technology. In the end, we review the state of the art in the freeze-drying of the biomaterials, extracellular vesicles, and cells. We suggest that the rational design of the experiment and implementation of advanced biophotonic tools are required to successfully preserve the natural biomaterials and cells by freeze-drying. We discuss this change of paradigm with existing literature and elaborate on our perspective based on our new unpublished results.

Challenges in the Fabrication of Biodegradable and Implantable Optical Fibers for Biomedical Applications

The limited penetration depth of visible light in biological tissues has encouraged researchers to develop novel implantable light-guiding devices. Optical fibers and waveguides that are made from biocompatible and biodegradable materials offer a straightforward but effective approach to overcome this issue. In the last decade, various optically transparent biomaterials, as well as different fabrication techniques, have been investigated for this purpose, and in view of obtaining fully fledged optical fibers. This article reviews the state-of-the-art in the development of biocompatible and biodegradable optical fibers. Whilst several reviews that focus on the chemical properties of the biomaterials from which these optical waveguides can be made have been published, a systematic review about the actual optical fibers made from these materials and the different fabrication processes is not available yet. This prompted us to investigate the essential properties of these biomaterials, in view of fabricating optical fibers, and in particular to look into the issues related to fabrication techniques, and also to discuss the challenges in the use and operation of these optical fibers. We close our review with a summary and an outline of the applications that may benefit from these novel optical waveguides.

Evaluation of Keratin/Bacterial Cellulose Based Scaffolds as Potential Burned Wound Dressing

The study presents the preparation and characterization of new scaffolds based on bacterial cellulose and keratin hydrogel which were seeded with adipose stem cells. The bacterial cellulose was obtained by developing an Acetobacter xylinum culture and was visualized using SEM (scanning electron microscopy) and elementally determined through EDAX (dispersive X-ray analysis) tests. Keratin species (β–keratose and γ-keratose) was extracted by hydrolytic degradation from non-dyed human hair. SEM, EDAX and conductometric titration tests were performed for physical–chemical and morphological evaluation. Cytocompatibility tests performed in vitro confirmed the material non-toxic effect on cells. The scaffolds, with and without stem cells, were grafted on the burned wounds on the rabbit’s dorsal region and the grafts were monitored for 21 days after the application on the wounds. The clinical monitoring of the grafts and the histopathological examination demonstrated the regenerative potential of the bacterial cellulose–keratin scaffolds, under the test conditions.

Extrusion-Based Bioprinting of Multilayered Nanocellulose Constructs for Cell Cultivation Using In Situ Freezing and Preprint CaCl2 Cross-Linking

Extrusion-based bioprinting with a preprint cross-linking agent and an in situ cooling stage provides a versatile method for the fabrication of 3D structures for cell culture. We added varying amounts of calcium chloride as a precross-linker into native nanofibrillated cellulose (NFC) hydrogel prior to 3D bioprinting to fabricate structurally stable multilayered constructs without the need for a separate cross-linking bath. To further enhance their stability, we bioprinted the multilayered structures onto an in situ temperature-controlled printing stage at 25, 0, and -10 °C. The extruded and subsequently freeze-dried volumetric constructs maintained their structures after being immersed into a cell culture medium. The ability to maintain the shape after immersion in cell media is an essential feature for the fabrication of stem cell-based artificial organs. We studied the viability and distribution of mouse embryonic fibroblast cells into the hydrogels using luminescence technique and confocal microscopy. Adding CaCl2 increased the stability of the multilayered nanocellulose structures, making them suitable for culturing cells inside the 3D hydrogel environment. Lower stage temperature considerably improved the structural stability of the 3D printed structures, however, had no effect on cell viability.

Cellulose Mesh with Charged Nanocellulose Coatings as a Promising Carrier of Skin and Stem Cells for Regenerative Applications

Engineering artificial skin constructs is an ongoing challenge. An ideal material for hosting skin cells is still to be discovered. A promising candidate is low-cost cellulose, which is commonly fabricated in the form of a mesh and is applied as a wound dressing. Unfortunately, the structure and the topography of current cellulose meshes are not optimal for cell growth. To enhance the surface structure and the physicochemical properties of a commercially available mesh, we coated the mesh with wood-derived cellulose nanofibrils (CNFs). Three different types of mesh coatings are proposed in this study as a skin cell carrier: positively charged cationic cellulose nanofibrils (cCNFs), negatively charged anionic cellulose nanofibrils (aCNFs), and a combination of these two materials (c+aCNFs). These cell carriers were seeded with normal human dermal fibroblasts (NHDFs) or with human adipose-derived stem cells (ADSCs) to investigate cell adhesion, spreading, morphology, and proliferation. The negatively charged aCNF coating significantly improved the proliferation of both cell types. The positively charged cCNF coating significantly enhanced the adhesion of ADSCs only. The number of NHDFs was similar on the cCNF coatings and on the noncoated pristine cellulose mesh. However, the three-dimensional (3D) structure of the cCNF coating promoted cell survival. The c+aCNF construct proved to combine benefits from both types of CNFs, which means that the c+aCNF cell carrier is a promising candidate for further application in skin tissue engineering.

Silk fibroin and silk-based biomaterial derivatives for ideal wound dressings

Silk fibroin (SF) is derived from Bombyx mori silkworm cocoons and has been used in textiles and as a suture material for decades. More recently, SF has been used for various new biomedical applications, including as a wound dressing, owing to its excellent biological and mechanical properties. Specifically, the mechanical stiffness, versatility, biocompatibility, biodegradability, water vapour permeability and slight bactericidal properties make SF an excellent candidate biomaterial for wound dressing applications. The effectiveness of SF as a wound dressing has been tested and well-documented in vitro as well as in-vivo, as described here. Dressings based on SF are currently used for treating a wide variety of chronic and acute (e.g. burn) wounds. SF and its derivatives prepared as biomaterials are available as sponges, hydrogels, nanofibrous matrices, scaffolds, micro/nanoparticles, and films. The present review discusses the potential role of SF in wound dressing and its modulation for wound dressing applications. The comparison of SF based dressings with other natural polymers understands the readers, the scope and limitation of the subject in-depth.

Differentiation of induced pluripotent stem cells to hepatocyte-like cells on cellulose nanofibril substrate

Differentiation of hepatocyte-like cells (HLCs) from human induced pluripotent stem cells (iPSCs) in vitro has great potential in regenerative medicine. Current protocol uses matrigel of animal origin as a substrate for the differentiation of iPSCs to HLCs. Use of an appropriate non-xenogenic substrate is very important for potential future clinical applications. Towards this goal, we used Cellulose Nanofibril (CNF) gel, a natural, non-toxic, biocompatible and biodegradable polymer in humans as a thin film substrate for the differentiation of iPSCs to HLCs. Here we demonstrated that CNF as a substrate film can efficiently differentiate human iPSCs to HLCs. We investigated the expression profile of the endoderm markers (SOX17 and CXCR4), hepatoblast markers (EpCAM and AFP) and mature hepatocyte marker (ASGPR1) by flow cytometry during the differentiation of iPSCs to HLCs on both CNF and matrigel substrates. We also tested the HLCs generated from both the substrates for the expression of hepatic markers such as A1AT, HNF4A, CYP450 isotypes by Real Time-PCR and its mature hepatocyte functions (lipid accumulation and albumin expression). Our results showed that the differentiated HLCs from both the substrates are comparable and expressed stage specific hepatocyte markers as well as functional maturity. We have demonstrated that CNF, a natural biomaterial, may be used in tissue engineering applications as a potential substrate for the differentiation of iPSCs to HLCs.