Real-time loop-mediated isothermal amplification: an early-warning tool for quarantine plant pathogen detection

Advances in biomacromolecule-functionalized magnetic particles for phytopathogen detection

Due to the increasing crop losses caused by common and newly emerging phytopathogens, there is a pressing need for the development of rapid and reliable methods for phytopathogen detection and analysis. Leveraging advancements in biochemical engineering technologies and nanomaterial sciences, researchers have put considerable efforts on utilizing biofunctionalized magnetic micro- and nanoparticles (MPs) to develop rapid and reliable systems for phytopathogen detection. MPs facilitate the rapid, high-throughput analysis and in-field applications, while the biomacromolecules, which play key roles in the biorecognitions, interactions and signal amplification, determine the specificity, sensitivity, reliability, and portability of pathogen detection systems. The integration of MPs and biomacromolecules provides dimensionality- and composition-dependent properties, representing a novel approach to develop phytopathogen detection systems. In this review, we summarize and discuss the general properties, synthesis and characterization of MPs, and focus on biomacromolecule-functionalized MPs as well as their representative applications for phytopathogen detection and analysis reported over the past decade. Extensively studied bioreceptors, such as antibodies, phages and phage proteins, nucleic acids, and glycans that are involved in the recognitions and interactions, are covered and discussed. Additionally, the integration of MPs-based detection system with portable microfluidic devices to facilitate their in-field applications is also discussed. Overall, this review focuses on biomacromolecule-functionalized MPs and their applications for phytopathogen detection, aiming to highlight their potential in developing advanced biosensing systems for effective plant protection.

Rapid real-time quantitative colorimetric LAMP methodology for field detection of Verticillium dahliae in crude olive-plant samples

BACKGROUND

Verticilium dahliae is the most important wilt pathogen of olive trees with a broad host range causing devastating diseases currently without any effective chemical control. Traditional detection methodologies are based on symptoms-observation or lab-detection using time consuming culturing or molecular techniques. Therefore, there is an increasing need for portable tools that can detect rapidly V. dahliae in the field.

RESULTS

In this work, we report the development of a novel method for the rapid, reliable and on-site detection of V. dahliae using a newly designed isothermal LAMP assay and crude extracts of olive wood. For the detection of the fungus, LAMP primers were designed targeting the internal transcribed spacer (ITS) region of the rRNA gene. The above assay was combined with a purpose-built prototype portable device which allowed real time quantitative colorimetric detection of V. dahliae in 35 min. The limit of detection of our assay was found to be 0.8 fg/μl reaction and the specificity 100% as indicated by zero cross-reactivity to common pathogens found in olive trees. Moreover, detection of V. dahliae in purified DNA gave a sensitivity of 100% (Ct < 30) and 80% (Ct > 30) while the detection of the fungus in unpurified crude wood extracts showed a sensitivity of 80% when multisampling was implemented. The superiority of the LAMP methodology regarding robustness and sensitivity was demonstrated when only LAMP was able to detect V. dahliae in crude samples from naturally infected trees with very low infection levels, while nested PCR and SYBR qPCR failed to detect the pathogen in an unpurified form.

CONCLUSIONS

This study describes the development of a new real time LAMP assay, targeting the ITS region of the rRNA gene of V. dahliae in olive trees combined with a 3D-printed portable device for field testing using a tablet. The assay is characterized by high sensitivity and specificity as well as ability to operate using directly crude samples such as woody tissue or petioles. The reported methodology is setting the basis for the development of an on-site detection methodology for V. dahliae in olive trees, but also for other plant pathogens.

Detecting Pathogenic Phytophthora Species Using Volatile Organic Compounds

There are several highly damaging Phytophthora species pathogenic to forest trees, many of which have been spread beyond their native range by the international trade of live plants and infested materials. Such introductions can be reduced through the development of better tools capable of the early, rapid, and high-throughput detection of contaminated plants. This study utilized a volatilomics approach (solid-phase microextraction coupled to gas chromatography-mass spectrometry) to differentiate between several Phytophthora species in culture and discriminate between healthy and Phytophthora-inoculated European beech and pedunculate oak trees. We tentatively identified 14 compounds that could differentiate eight Phytophthora species from each other in vitro. All of the Phytophthora species examined, except Phytophthora cambivora, uniquely produced at least one compound not observed in the other species; however, most detected compounds were shared between multiple species. Phytophthora polonica had the most unique compounds and was the least similar of all the species examined. The inoculated seedlings had qualitatively different volatile profiles and could be distinguished from the healthy controls by the presence of isokaurene, anisole, and a mix of three unknown compounds. This study supports the notion that volatiles are suitable for screening plant material, detecting tree pathogens, and differentiating between healthy and diseased material.

Cross-pathogenicity of Phytophthora palmivora associated with bud rot disease of oil palm and development of biomarkers for detection

Phytophthora palmivora has caused disease in many crops including oil palm in the South America region. The pathogen has had a significant economic impact on oil palm cultivation in Colombia, and therefore poses a threat to oil palm cultivation in other regions of the World, especially in Southeast Asia, the largest producer of the crop. This study aimed to look at the ability of isolates from Malaysia, Colombia, and other regions to cross-infect Malaysian oil palm, durian, and cocoa and to develop specific biomarkers and assays for identification, detection, and diagnosis of P. palmivora as a key component for the oil palm biosecurity continuum in order to contain the disease especially at the ports of entry. We have developed specific molecular biomarkers to identify and detect Phytophthora palmivora using polymerase chain reaction (PCR) and real-time loop mediated isothermal amplification (rt-LAMP) in various sample types such as soil and plants. The limit of detection (DNA template, pure culture assay) for the PCR assay is 5.94 × 10-2 ng µl-1 and for rt-LAMP is 9.28 × 10-4 ng µl-1. Diagnosis using rt-LAMP can be achieved within 30 min of incubation. In addition, PCR primer pair AV3F/AV3R developed successfully distinguished the Colombian and Malaysian P. palmivora isolates.

Development of simple, rapid, and sensitive methods for detection of hepatitis C virus RNA from whole blood using reverse transcription loop-mediated isothermal amplification

Hepatitis C virus (HCV) infection is an underdiagnosed global health problem. Diagnosis of current HCV infections typically requires testing for HCV RNA using high-complexity laboratory tests. Methods for the detection of HCV RNA that are simple, inexpensive, rapid, and compatible with use outside of a laboratory setting are very important in order to improve access to hepatitis C diagnostic testing and facilitate accelerated linkage to care. We developed and evaluated three simple workflows for extracting HCV RNA from small volumes of whole blood for use in a sensitive, pan-genotypic RT-LAMP assay. The water workflow uses osmotic stress to release HCV RNA and has a limit of detection of 4.3 log10(IU/mL) (95% CI 4.0-4.9). The heat workflow uses a heating step to release HCV RNA and has a limit of detection of 4.2 log10(IU/mL) (95% CI 3.8-5.1). The bead workflow, which uses chemical lysis of the sample and a streamlined paramagnetic solid phase reversible immobilization bead procedure for nucleic acid purification, has a limit of detection of 2.8 log10(IU/mL) (95% CI 2.5-3.4). When used to test whole blood spiked with HCV RNA-positive plasma samples in which most HCV levels were below 5.0 log10(IU/mL), the water, heat, and bead workflows detected HCV RNA in 69%, 75%, and 94% of samples, respectively. These workflows are compatible with visual lateral flow dipsticks, and each takes less than 60 min from sample to result. Each workflow can be performed with minimal and inexpensive equipment. With further procedural simplifications, these workflows may form the basis of assays for the point-of-care diagnosis of HCV infections.

A Loop-Mediated Isothermal Amplification Assay for the Identification of Botrytis fragariae in Strawberry

Gray mold in strawberry is caused by multiple species of Botrytis, including Botrytis cinerea, B. pseudocinerea, B. fragariae, and B. mali. The species B. cinerea and B. fragariae are widespread in production regions of the eastern United States and Germany, and their distinction is important for disease management strategies. Currently, the only way to differentiate these species in field samples is by PCR, which is time consuming, labor intensive, and costly. In this study, a loop-mediated isothermal amplification (LAMP) technique was developed based on species-specific NEP2 gene nucleotide sequences. The designed primer set specifically amplified B. fragariae DNA and no other Botrytis spp. (B. cinerea, B. mali, and B. pseudocinerea) or plant pathogens. The LAMP assay was able to amplify fragments from DNA extracted from infected fruit using a rapid DNA extraction protocol, confirming its ability to detect low amounts of B. fragaria DNA from field-infected fruit. In addition, a blind test was performed to identify B. fragariae in 51 samples collected from strawberry fields in the eastern United States using the LAMP technique. The B. fragariae samples were identified with a reliability of 93.5% (29 of 32), and none of the B. cinerea, B. pseudocinerea, or B. mali samples included in the test were amplified in 10 min. Our results show that the LAMP technique is a specific and reliable method for the detection of B. fragariae from infected fruit tissue and can help to control this important disease in the field.

Novel plant disease detection techniques-a brief review

Plant pathogens cause severe losses to agricultural yield worldwide. Tracking plant health and early disease detection is important to reduce the disease spread and thus economic loss. Though visual scouting has been practiced from former times, detection of asymptomatic disease conditions is difficult. So, DNA-based and serological methods gained importance in plant disease detection. The progress in advanced technologies challenges the development of rapid, non-invasive, and on-field detection techniques such as spectroscopy. This review highlights various direct and indirect ways of detecting plant diseases like Enzyme-linked immunosorbent assay, Lateral flow assays, Polymerase chain reaction, spectroscopic techniques and biosensors. Although these techniques are sensitive and pathogen-specific, they are more laborious and time-intensive. As a consequence, a lot of interest is gained in in-field adaptable point-of-care devices with artificial intelligence-assisted pathogen detection at an early stage. More recently computer-aided techniques like neural networks are gaining significance in plant disease detection by image processing. In addition, a concise report on the latest progress achieved in plant disease detection techniques is provided.

Rapid New Diagnostic LAMP (Loop-Mediated Isothermal Amplification) Assays to Distinguish Among the Four Lineages of Phytophthora ramorum

Sudden oak death (SOD) is caused by Phytophthora ramorum, an invasive oomycete pathogen. This pathogen is of major regulatory concern for nurseries, horticulture, and forestry in the United States and around the world. Three of the 12 identified lineages of P. ramorum currently occur in the United States (NA1, NA2, and EU1) affecting wildland forests and nurseries. Rapid identification and lineage determination is essential to accelerate management decisions, detect introductions of new lineages, and control the spread of SOD. The objective of this study was to develop and validate diagnostic tools to rapidly identify P. ramorum and distinguish among the four common lineages of the pathogen and to accelarate management decision making. The loop-mediated isothermal amplification (LAMP) assays developed here are species specific with no cross reaction to common Phytophthora species found in Oregon, California, and Washington. The lineage-specific assays unambiguously distinguish among the four common clonal lineages. These assays are sensitive and able to detect P. ramorum DNA ranging in concentration from 30 to 0.03 ng/μl depending on the assay. These assays work effectively on a variety of sample types including plant tissue, cultures, and DNA. They have been integrated into the SOD diagnostic process in the forest pathology lab at Oregon State University. To date, 190 samples have been correctly identified from over 200 field samples tested for lineage determination. The development of these assays will help managers in forestry and horticulture identify and rapidly respond to new outbreaks of P. ramorum.

A LAMP Assay for Rapid Detection of the Pitch Canker Pathogen Fusarium circinatum

The pine pitch canker pathogen Fusarium circinatum is endemic in the southeastern United States and Central America and represents an invasive threat globally. This ecologically adaptable fungus readily infects all parts of its pine hosts, leading to widespread mortality of nursery seedlings and decline in the health and productivity of forest stands. Because trees infected by F. circinatum can remain asymptomatic for long periods of time, accurate and rapid tools are needed for real-time diagnostics and surveillance at ports, in nurseries, and in plantations. To meet this need and to limit the spread and impact of the pathogen, we developed a molecular test using loop-mediated isothermal amplification (LAMP), a technology that allows for the rapid detection of pathogen DNA on portable, field-capable devices. LAMP primers were designed and validated to amplify a gene region unique to F. circinatum. Using a globally representative collection of F. circinatum isolates and other closely related species, we have demonstrated that the assay can be used to identify F. circinatum across its genetic diversity and that it is sensitive to as few as 10 cells from purified DNA extracts. The assay can also be used with a simple, pipette-free DNA extraction method and is compatible with testing symptomatic pine tissues in the field. This assay has the potential to facilitate diagnostic and surveillance efforts both in the laboratory and in the field and, thus, to reduce the spread and impact of pitch canker worldwide.

Malachite Green-Based Detection of SARS-CoV-2 by One-Step Reverse Transcription Loop-Mediated Isothermal Amplification

The pandemic of severe acute respiratory syndrome 2 (SARS-CoV-2) revealed the necessity of diagnosis of the infected people to prevent the prevalence infection cycle. Many commercial pathogen diagnosis methods are based on the detection of genomic materials. Isothermal amplification methods such as loop-mediated-isothermal amplification (LAMP) are the method of choice in these cases. Reverse transcription steps are efficiently coupled to LAMP for the detection of pathogens with genomic RNAs such as SARS-CoV-2. Many detection systems for LAMP include fluorescent readout systems. Although such systems result in desirable limits of detection, the need for special instrumentation is the main dispute of such systems to become real point of care assays. In contrast, colorimetric detection methods would reduce costs and improve the applicability of the system. In this study one-step reverse transcription-LAMP reaction was established that enables visual detection of the SARS-CoV-2 genome. Nasopharyngeal RNA samples were first validated by reverse transcription quantitative polymerase chain reaction and then subjected to RT-LAMP. To lower the cost associated with the readout system equipment, malachite green (MG) was used. The color change of MG to blue allowed visual detection of the virus. Firstly, experiments were set up as two-step RT-LAMP reaction to identify the best primer sets. In addition, MG concentration was optimized with the significant colorimetric signal for the positive samples. Next, a one-step colorimetric method was developed for the detection of SARS-CoV-2 based on MG color shift in 2 h.

Real-Time Portable LAMP Assay for a Rapid Detection of Xylella fastidiosa In-Field

Early diagnosis is part of a decision-making process which in the case of plant diseases may prevent the spread of invasive plant pathogens and assist in their eradication. Significant advantages could be obtained from moving testing technology closer to the sampling site, thereby reducing the detection time. This chapter describes a portable real-time LAMP assay for a specific detection of Xylella fastidiosa in-field. The LAMP assay, including DNA extraction, allows a complete and specific in-field analysis in just 40 minutes, enabling the detection of pathogen DNA in host tissues.

Sensitive colorimetric detection of antibiotic resistant Staphylococcus aureus on dairy farms using LAMP with pH-responsive polydiacetylene

Rapidly and accurately detecting antibiotic-resistant pathogens in agriculture and husbandry is important since these represent a major threat to public health. While much attention has been dedicated to detecting now-common resistant bacteria, such as methicillin-resistant Staphylococcus aureus, fewer methods have been developed to assess resistance against macrolides in Staphylococcus aureus (SA). Here, we report a visual on-site detection system for macrolide resistant SA in dairy products. First, metagenomic sequencing in raw milk, cow manure, water and aerosol deposit collected from dairy farms around Tianjin was used to identify the most abundant macrolide resistance gene, which was found to be the macB gene. In parallel, SA housekeeping genes were screened to allow selective identification of SA, which resulted in the selection of the SAOUHSC_01275 gene. Next, LAMP assays targeting the above-mentioned genes were developed and interpreted by agarose gel electrophoresis. For on-site application, different pH-sensitive colorimetric LAMP indicators were compared, which resulted in selection of polydiacetylene (PDA) as the most sensitive candidate. Additionally, a semi-quantitative detection could be realized by analyzing the RGB information via smartphone with a LOD of 1.344 × 10-7 ng/μL of genomic DNA from a milk sample. Finally, the proposed method was successfully carried out at a real farm within 1 h from sample to result by using freeze-dried reagents and portable devices. This is the first instance in which PDA is used to detect LAMP products, and this generic read-out system can be expanded to other antibiotic resistant genes and bacteria.

A loop-mediated isothermal amplification (LAMP) assay for the detection of Cryptotermes brevis West Indian drywood termite (Blattodea: Kalotermitidae)

Cryptotermes brevis is one of the most destructive invasive termites in the subtropics and tropics and is a common biosecurity intercept at the Australian border. Drywood termite species are cryptic and difficult to identify morphologically in situations when soldiers or imagos are unavailable. We developed a novel DNA based loop-mediated isothermal amplification (LAMP) assay to detect C. brevis and differentiate it from other drywood termites. Validated voucher specimens of 30 different drywood termite species were obtained from several insect collections from which DNA was extracted and amplified. The amplicons containing partial mitochondrial 16S rRNA were sequenced and a DNA database was created from which C. brevis LAMP primers were developed, optimized, and tested. The assay was assessed against a range of target and non-target species and found to be specific, successfully amplifying the target specimens of C. brevis in under 30 min. Amplification success was variable against C. brevis faecal pellets due to minute, unmeasurable or degraded DNA. This LAMP test is a new tool for the rapid detection of C. brevis that will enable faster and less destructive management of drywood termite infestations.

Loop-Mediated Isothermal Amplification for Detection of Plant Pathogens in Wheat (Triticum aestivum)

Wheat plants can be infected by a variety of pathogen species, with some of them causing similar symptoms. For example, Zymoseptoria tritici and Parastagonospora nodorum often occur together and form the Septoria leaf blotch complex. Accurate detection of wheat pathogens is essential in applying the most appropriate disease management strategy. Loop-mediated isothermal amplification (LAMP) is a recent molecular technique that was rapidly adopted for detection of plant pathogens and can be implemented easily for detection in field conditions. The specificity, sensitivity, and facility to conduct the reaction at a constant temperature are the main advantages of LAMP over immunological and alternative nucleic acid-based methods. In plant pathogen detection studies, LAMP was able to differentiate related fungal species and non-target strains of virulent species with lower detection limits than those obtained with PCR. In this review, we explain the amplification process and elements of the LAMP reaction, and the variety of techniques for visualization of the amplified products, along with their advantages and disadvantages compared with alternative isothermal approaches. Then, a compilation of analyses that show the application of LAMP for detection of fungal pathogens and viruses in wheat is presented. We also describe the modifications included in real-time and multiplex LAMP that reduce common errors from post-amplification detection in traditional LAMP assays and allow discrimination of targets in multi-sample analyses. Finally, we discuss the utility of LAMP for detection of pathogens in wheat, its limitations, and current challenges of this technique. We provide prospects for application of real-time LAMP and multiplex LAMP in the field, using portable devices that measure fluorescence and turbidity, or facilitate colorimetric detection. New technologies for detection of plant pathogen are discussed that can be integrated with LAMP to obtain elevated analytical sensitivity of detection.

Development of Loop-Mediated Isothermal Amplification Assay for Rapid Detection and Analysis of the Root-Knot Nematode Meloidogyne hapla in Soil

Soil analysis is crucial for estimating the risk of crop damage by the root-knot nematode Meloidogyne hapla. Here, we developed an analysis assay based on Loop-mediated Isothermal Amplification (LAMP). The LAMP primers were verified for specificity against 10 different nematode species. A manual soil DNA extraction, referred to as SKMM, was developed and compared with a FastDNA kit followed by DNA purification. DNA was extracted with both methods from artificially inoculated soils as well as from naturally infested soil collected from farm fields. The primers exclusively amplified DNA from M. hapla with both colorimetric and real-time LAMP. The detection limit was 193 gene copies and 0.0016 juveniles (12 pg µL−1) per reaction. DNA concentrations and purity (A260/A230) were significantly higher using the SKMM procedure compared with the kit. From the field samples collected in 2019, DNA was amplified from 16% of samples extracted with SKMM and from 11% of samples using the kit. Occurrence of M. hapla DNA was confirmed in soil samples from two out of six field soils in 2020 using both real-time LAMP and qPCR. In conclusion, the developed real-time LAMP is a fast and specific assay for detection and quantification of M. hapla DNA in soil.

A Real-Time Loop-Mediated Isothermal Amplification for Detection of the Wheat Dwarf Virus in Wheat and the Insect Vector Psammotettix alienus

Wheat dwarf virus (WDV; genus Mastrevirus, family Geminiviridae) is an economically important and widespread pathogen of cereal crops. It causes huge yield loss in wheat because of the unavailability of resistant varieties and rapid transmission by the vector leafhopper, Psammotettix alienus (Dahlb). To monitor and forecast this viral disease, an early diagnosis method is required for WDV detection in both infected plants and the virus vectors. In this study, we developed a real-time loop-mediated isothermal amplification (LAMP) assay for WDV detection. The positive sample could be detected within 28 to 32 min by following a simple, cost-effective procedure. The real-time LAMP assay showed a sensitivity of 2.7 × 10^5-6 copies/μl for detection and a high specificity for WDV amplification, with a similar accuracy to quantitative PCR. Furthermore, a closed-tube dye method facilitates the inspection of the LAMP reaction and avoids cross-contamination in the detection of the virus. This valuable detection assay could serve as an important tool for diagnosis and forecasting wheat dwarf disease intensity in the field.

Development and Validation of a Loop-Mediated Isothermal Amplification Diagnostic Method to Detect the Quarantine Potato Pale Cyst Nematode, Globodera pallida

The potato cyst nematode (PCN) Globodera pallida has acquired significant importance throughout Europe due to its nefarious effects on potato production. Rapid and reliable diagnosis of PCN is critical during the surveillance programs and for the implementation of control measures. Molecular DNA-based methods are available, but they require expensive laboratory facilities, equipment and trained technicians. Moreover, there is an additional need of time for sample shipment and testing. In this work, we have developed a new and simple assay which reliably discriminates G. pallida from other cyst nematodes in less than 40 min. This assay may be applied either on cysts or juveniles with the ability to detect a single juvenile of G. pallida in a sample of at least 40 juveniles of the non-target species G. rostochiensis. This test should be a tool to improve the performance of the laboratory and has the potential to be performed on-site.

Rapid Detection of Pityophthorus juglandis (Blackman) (Coleoptera, Curculionidae) with the Loop-Mediated Isothermal Amplification (LAMP) Method

The walnut twig beetle Pityophthorus juglandis is a phloem-boring bark beetle responsible, in association with the ascomycete Geosmithia morbida, for the Thousand Cankers Disease (TCD) of walnut trees. The recent finding of TCD in Europe prompted the development of effective diagnostic protocols for the early detection of members of this insect/fungus complex. Here we report the development of a highly efficient, low-cost, and rapid method for detecting the beetle, or even just its biological traces, from environmental samples: the loop-mediated isothermal amplification (LAMP) assay. The method, designed on the 28S ribosomal RNA gene, showed high specificity and sensitivity, with no cross reactivity to other bark beetles and wood-boring insects. The test was successful even with very small amounts of the target insect’s nucleic acid, with limit values of 0.64 pg/µL and 3.2 pg/µL for WTB adults and frass, respectively. A comparison of the method (both in real time and visual) with conventional PCR did not display significant differences in terms of LoD. This LAMP protocol will enable quick, low-cost, and early detection of P. juglandis in areas with new infestations and for phytosanitary inspections at vulnerable sites (e.g., seaports, airports, loading stations, storage facilities, and wood processing companies).

Sensing Methodologies in Agriculture for Monitoring Biotic Stress in Plants Due to Pathogens and Pests

Reducing agricultural losses is an effective way to sustainably increase agricultural output efficiency to meet our present and future needs for food, fiber, fodder, and fuel. Our ever-improving understanding of the ways in which plants respond to stress, biotic and abiotic, has led to the development of innovative sensing technologies for detecting crop stresses/stressors and deploying efficient measures. This article aims to present the current state of the methodologies applied in the field of agriculture towards the detection of biotic stress in crops. Key sensing methodologies for plant pathogen (or phytopathogen), as well as herbivorous insects/pests are presented, where the working principles are described, and key recent works discussed. The detection methods overviewed for phytopathogen-related stress identification include nucleic acid-based methods, immunological methods, imaging-based techniques, spectroscopic methods, phytohormone biosensing methods, monitoring methods for plant volatiles, and active remote sensing technologies. Whereas the pest-related sensing techniques include machine-vision-based methods, pest acoustic-emission sensors, and volatile organic compound-based stress monitoring methods. Additionally, Comparisons have been made between different sensing techniques as well as recently reported works, where the strengths and limitations are identified. Finally, the prospective future directions for monitoring biotic stress in crops are discussed.

Rapid Detection of Pine Pathogens Lecanosticta acicola, Dothistroma pini and D. septosporum on Needles by Probe-Based LAMP Assays

Needle blights are serious needle fungal diseases affecting pines both in natural and productive forests. Among needle blight agents, the ascomycetes Lecanosticta acicola, Dothistroma pini and D. septosporum are of particular concern. These pathogens need specific, fast and accurate diagnostics since they are regulated species in many countries and may require differential management measures. Due to the similarities in fungal morphology and the symptoms they elicit, these species are hard to distinguish using morphological characteristics. The symptoms can also be confused with those caused by insects or abiotic agents. DNA-based detection is therefore recommended. However, the specific PCR assays that have been produced to date for the differential diagnosis of these pathogens can be applied only in a well-furnished laboratory and the procedure takes a relatively long execution time. Surveillance and forest protection would benefit from a faster diagnostic method, such as a loop-mediated isothermal amplification (LAMP) assay, which requires less sophisticated equipment and can also be deployed directly on-site using portable devices. LAMP assays for the rapid and early detection of L. acicola, D. pini and D. septosporum were developed in this work. Species-specific LAMP primers and fluorescent assimilating probes were designed for each assay, targeting the beta tubulin (β-tub2) gene for the two Dothistroma species and the elongation factor (EF-1α) region for L. acicola. Each reaction detected its respective pathogen rapidly and with high specificity and sensitivity in DNA extracts from both pure fungal cultures and directly from infected pine needles. These qualities and the compatibility with inexpensive portable instrumentation position these LAMP assays as an effective method for routine phytosanitary control of plant material in real time, and they could profitably assist the management of L. acicola, D. pini and D. septosporum.

Precision Agriculture Digital Technologies for Sustainable Fungal Disease Management of Ornamental Plants

Ornamental plant production constitutes an important sector of the horticultural industry worldwide and fungal infections, that dramatically affect the aesthetic quality of plants, can cause serious economic and crop losses. The need to reduce the use of pesticides for controlling fungal outbreaks requires the development of new sustainable strategies for pathogen control. In particular, early and accurate large-scale detection of occurring symptoms is critical to face the ambitious challenge of an effective, energy-saving, and precise disease management. Here, the new trends in digital-based detection and available tools to treat fungal infections are presented in comparison with conventional practices. Recent advances in molecular biology tools, spectroscopic and imaging technologies and fungal risk models based on microclimate trends are examined. The revised spectroscopic and imaging technologies were tested through a case study on rose plants showing important fungal diseases (i.e., spot spectroscopy, hyperspectral, multispectral, and thermal imaging, fluorescence sensors). The final aim was the examination of conventional practices and current e-tools to gain the early detection of plant diseases, the identification of timing and spacing for their proper management, reduction in crop losses through environmentally friendly and sustainable production systems. Moreover, future perspectives for enhancing the integration of all these approaches are discussed.

Development of a Rapid Loop-Mediated Isothermal Amplification Assay for the Detection of Dothistroma septosporum

A Loop-Mediated Isothermal Amplification (LAMP) assay was developed for the detection of the pine pathogen Dothistroma septosporum (G. Dorog.) M. Morelet. The specificity of the LAMP assay was tested using a selection of pine needle fungi, including Dothistroma pini Hulbary, and Lecanosticta acicola (Thüm.) Syd.; only D. septosporum DNA was amplified by the test. In terms of sensitivity, the assay was able to detect as little as 1 pg of total D. septosporum DNA. This assay enables DNA extracted from diseased host needles to be rapidly tested for the presence of D. septosporum using relatively simple to operate equipment away from a fully equipped molecular biology laboratory.

Development of a loop-mediated isothermal amplification (LAMP) assay for the identification of the invasive wood borer Aromia bungii (Coleoptera: Cerambycidae) from frass

The red-necked longhorn beetle Aromia bungii (Faldermann, 1835) (Coleoptera: Cerambycidae) is native to east Asia, where it is a major pest of cultivated and ornamental species of the genus Prunus. Morphological or molecular discrimination of adults or larval specimens is required to identify this invasive wood borer. However, recovering larval stages of the pest from trunks and branches causes extensive damage to plants and is timewasting. An alternative approach consists in applying non-invasive molecular diagnostic tools to biological traces (i.e., fecal pellets, frass). In this way, infestations in host plants can be detected without destructive methods. This paper presents a protocol based on both real-time and visual loop-mediated isothermal amplification (LAMP), using DNA of A. bungii extracted from fecal particles in larval frass. Laboratory validations demonstrated the robustness of the protocols adopted and their reliability was confirmed performing an inter-lab blind panel. The LAMP assay and the qPCR SYBR Green method using the F3/B3 LAMP external primers were equally sensitive, and both were more sensitive than the conventional PCR (sensitivity > 10³ to the same starting matrix). The visual LAMP protocol, due to the relatively easy performance of the method, could be a useful tool to apply in rapid monitoring of A. bungii and in the management of its outbreaks.

Molecular Identification of Anoplophora glabripennis (Coleoptera: Cerambycidae) From Frass by Loop-Mediated Isothermal Amplification

Anoplophora glabripennis (Motschulsky, 1853), native to eastern Asia, is a destructive woodborer of many ornamental species, leading to the decline and the death of the attacked trees. In outbreak areas as Europe or North America, this pest is usually identified using morphological or molecular analyses of adult or larval specimens. However, the procedures for collecting A. glabripennis specimens from infested plants are too expensive and time consuming for routine screening. A noninvasive diagnostic tool based on frass discrimination is therefore crucial for the rapid identification of A. glabripennis at different development stages in the host. This article describes a rapid diagnostic protocol based on loop-mediated isothermal amplification (LAMP). DNA extracted from A. glabripennis frass was amplified with both visual and real-time LAMP and compared with those of nontarget species. The results show that the method is reliable and accurate and therefore could be a promising diagnostic tool in phytosanitary surveys.

Rapid Detection of Raffaelea lauricola Directly from Host Plant and Beetle Vector Tissues Using Loop-Mediated Isothermal Amplification

Since its introduction in 2002, laurel wilt disease has devastated indigenous lauraceous species in the southeastern United States. The causal agent is a fungal pathogen, Raffaelea lauricola, which, after being introduced into the xylem of trees by its vector beetle, Xyleborus glabratus, results in a fatal vascular wilt. Rapid detection and accurate diagnosis of infections is paramount to the successful implementation of disease management strategies. Current management operations to prevent the spread of laurel wilt disease are largely delayed by time-consuming laboratory procedures to confirm the diagnosis. In order to greatly speed up the operations, we developed a loop-mediated isothermal amplification (LAMP) species-specific assay that targets the β-tubulin gene region of R. lauricola, and allows for the rapid detection of the pathogen directly from host plant and beetle tissues. The assay is capable of amplifying as little as 0.5 pg of fungal DNA and as few as 50 conidia. The assay is also capable of detecting R. lauricola directly from wood tissue of artificially inoculated redbay saplings as early as 10 and 12 days postinoculation, when testing high-quality and crude DNA extracts, respectively. Finally, crude DNA extracts of individual adult female X. glabratus beetles were assayed and the pathogen was detected from all specimens. This assay greatly reduces the time required to confirm a laurel wilt diagnosis and, because LAMP technology is well suited to provide point-of-care testing, it has the potential to expedite and facilitate implementation of management operations in response to disease outbreaks.

Advances in point-of-care nucleic acid extraction technologies for rapid diagnosis of human and plant diseases

Global health and food security constantly face the challenge of emerging human and plant diseases caused by bacteria, viruses, fungi, and other pathogens. Disease outbreaks such as SARS, MERS, Swine Flu, Ebola, and COVID-19 (on-going) have caused suffering, death, and economic losses worldwide. To prevent the spread of disease and protect human populations, rapid point-of-care (POC) molecular diagnosis of human and plant diseases play an increasingly crucial role. Nucleic acid-based molecular diagnosis reveals valuable information at the genomic level about the identity of the disease-causing pathogens and their pathogenesis, which help researchers, healthcare professionals, and patients to detect the presence of pathogens, track the spread of disease, and guide treatment more efficiently. A typical nucleic acid-based diagnostic test consists of three major steps: nucleic acid extraction, amplification, and amplicon detection. Among these steps, nucleic acid extraction is the first step of sample preparation, which remains one of the main challenges when converting laboratory molecular assays into POC tests. Sample preparation from human and plant specimens is a time-consuming and multi-step process, which requires well-equipped laboratories and skilled lab personnel. To perform rapid molecular diagnosis in resource-limited settings, simpler and instrument-free nucleic acid extraction techniques are required to improve the speed of field detection with minimal human intervention. This review summarizes the recent advances in POC nucleic acid extraction technologies. In particular, this review focuses on novel devices or methods that have demonstrated applicability and robustness for the isolation of high-quality nucleic acid from complex raw samples, such as human blood, saliva, sputum, nasal swabs, urine, and plant tissues. The integration of these rapid nucleic acid preparation methods with miniaturized assay and sensor technologies would pave the road for the "sample-in-result-out" diagnosis of human and plant diseases, especially in remote or resource-limited settings.

Development of an FTP-LAMP assay based on TaqMan real-time PCR and LAMP for the specific detection of Xylella fastidiosa De Donno and mulberry strains in both plants and insect vectors

We developed two real-time detection assays, TaqMan real-time PCR and LAMP, using primers and probe designed based on a sequence annotated to code for a Haemagglutinin-related protein (Hg) of Xylella fastidiosa (Xf), a gene uniquely present in the Italian olive (De Donno of olive) and American mulberry strains, for specific detection of the target Xf strains. These assays were validated with DNA samples extracted from Xf-infected plant samples and from two species of insect vectors (Philaenus spumarius, Ps; and Neophilaenus campestris, Nc). Both techniques were proven to be highly sensitive (100 fg of Xf-genomic DNA) and specific to the Italian De Donno and American mulberry strains of Xf. When our LAMP was utilized in a duplex manner by combining with previously published universal primers and probe for detection of all Xf-subspecies and strains, the duplex LAMP showed high versatility in the simultaneous detection and differentiation of the Italian De Donno and American mulberry stains form other subspecies/strains. Furthermore, the Hg gene-specific LAMP primers and TaqMan probe were exploited to develop a new approach; henceforth referred to as the Fluorescence of TaqMan Probe upon Dequenching - Loop mediated Isothermal Amplification (FTP-LAMP). In the FTP-LAMP, the Xf-Hg specific fluorophore-quenched probe was added to a standard LAMP reaction and fluoresces only when bound to its target, allowing for a sequence-specific detection of the Xf-Italian De Donno and American mulberry strains in a LAMP context. Our FTP-LAMP assay showed to be highly sensitive detecting down to 100 fg genomic DNA of Xf, when tested on Xf-genomic DNA extracted from infected plants, DAS-ELISA-crude saps and insect vectors. Furthermore, the assay showed high specificity (98.7% vs 89% for LAMP) when applied on DNA templates from insect vectors. With the addition of an extra target sequence-specific probe acting as a direct Xf-specific dye, the FTP-LAMP has gained more specificity and reduced one of the main problems of the LAMP assay (false positives) when used for detecting of Xf in insect vectors. To the best of our knowledge, this study reports the development of the first LAMP assay and the first novel FTP-LAMP method for specific detection of the Italian De Donno and the American mulberry strains of Xf. Together with the Xf universal LAMP primers in a duplex approach, the FTP-LAMP could represent a useful tool not only for the specific detection of the olive-associated strain in Italy, but also to differentiate the De Donno strain from other strains of Xf already reported in Italy and Europe (Germany, France, Spain and Portugal).

Rapid detection of pecan root-knot nematode, Meloidogyne partityla, in laboratory and field conditions using loop-mediated isothermal amplification

Meloidogyne partityla is the dominant root-knot nematode (RKN) species parasitizing pecan in Georgia. This species is known to cause a reduction in root growth and a decline in the yields of mature pecan trees. Rapid and accurate diagnosis of this RKN is required to control this nematode disease and reduce losses in pecan production. In this study, a loop-mediated isothermal amplification (LAMP) method was developed for simple, rapid, and on-site detection of M. partityla in infested plant roots and validated to detect the nematode in laboratory and field conditions. Specific primers were designed based on the sequence distinction of the internal transcribed spacer (ITS)-18S/5.8S ribosomal RNA gene between M. partityla and other Meloidogyne spp. The LAMP detection technique could detect the presence of M. partityla genomic DNA at a concentration as low as 1 pg, and no cross reactivity was found with DNA from other major RKN species such as M. javanica, M. incognita and M. arenaria, and M. hapla. We also conducted a traditional morphology-based diagnostic assay and conventional polymerase chain reaction (PCR) assay to determine which of these techniques was less time consuming, more sensitive, and convenient to use in the field. The LAMP assay provided more rapid results, amplifying the target nematode species in less than 60 min at 70°C, with results 100 times more sensitive than conventional PCR (~2-3 hrs). Morphology-based, traditional diagnosis was highly time-consuming (2 days) and more laborious than conventional PCR and LAMP assays. These features greatly simplified the operating procedure and made the assay a powerful tool for rapid, on-site detection of pecan RKN, M. partityla. The developed LAMP assay will facilitate accurate pecan nematode diagnosis in the field and contribute to the management of the pathogen.

Detection of porcine-derived ingredients from adulterated meat based on real-time loop-mediated isothermal amplification

Increasingly globalized and complex food supply chains contribute to a growing problem of meat fraud. Meat adulteration with pork is especially exceptionable to the global population for health concern and religious faith reasons. To prevent unfair competition and protect consumer rights, an efficient and rapid assay to identify the species of meat products is crucial. In this study, a real-time loop-mediated isothermal amplification (real-time LAMP) assay was developed for the detection of a porcine gene in meat products. The designed primers were highly selective for the porcine gene. The amplification showed no cross-reactivity with 11 other meats. The established method required 20 min with an initial amplification curve of approximately 10 min and demonstrated a detection limit of 1.76 pg/μL porcine DNA, which is 1000 times more sensitive than PCR. This study is the first attempt at detecting porcine-derived ingredients using a real-time LAMP assay in commercial products. This method meets specificity, rapidness, robustness, and sensitivity criteria; its practical application will greatly aid in battling adulteration in the food industry.

Real-time loop-mediated isothermal amplification assay for rapid detection of Fusarium circinatum

Fusarium circinatum is the causal agent of pitch canker, a lethal disease of pine and other conifers. Since F. circinatum is a quarantine organism, its timely detection could efficiently prevent its introduction into new areas or facilitate spread management in already infected sites. In this study, we developed a sequence-specific probe loop-mediated isothermal amplification (LAMP) assay for F. circinatum using a field-deployable portable instrument. The assay was able to recognize the pathogen in host tissues in just 30 min, and the sensitivity of the assay made it possible to detect even small amounts of F. circinatum DNA (as low as 0.5 pg/μl). The high efficiency of this method suggests its use as a standard diagnostic tool during phytosanitary controls.

Fast and reliable molecular methods to detect fungal pathogens in woody plants

Plant diseases caused by pathogenic microorganisms represent a serious threat to plant productivity, food security, and natural ecosystems. An effective framework for early warning and rapid response is a crucial element to mitigate or prevent the impacts of biological invasions of plant pathogens. For these reasons, detection tools play an important role in monitoring plant health, surveillance, and quantitative pathogen risk assessment, thus improving best practices to mitigate and prevent microbial threats. The need to reduce the time of diagnosis has prompted plant pathologists to move towards more sensitive and rapid methods such as molecular techniques. Considering prevention to be the best strategy to protect plants from diseases, this review focuses on fast and reliable molecular methods to detect the presence of woody plant pathogens at early stage of disease development before symptoms occur in the host. A harmonized pool of novel technical, methodological, and conceptual solutions is needed to prevent entry and establishment of new diseases in a country and mitigate the impact of both invasive and indigenous organisms to agricultural and forest ecosystem biodiversity and productivity.

A LAMP at the end of the tunnel: A rapid, field deployable assay for the kauri dieback pathogen, Phytophthora agathidicida

The root rot causing oomycete, Phytophthora agathidicida, threatens the long-term survival of the iconic New Zealand kauri. Currently, testing for this pathogen involves an extended soil bioassay that takes 14–20 days and requires specialised staff, consumables, and infrastructure. Here we describe a loop-mediated isothermal amplification (LAMP) assay for the detection of P. agathidicida that targets a portion of the mitochondrial apocytochrome b coding sequence. This assay has high specificity and sensitivity; it did not cross react with a range of other Phytophthora isolates and detected as little as 1 fg of total P. agathidicida DNA or 116 copies of the target locus. Assay performance was further investigated by testing plant tissue baits from flooded soil samples using both the extended soil bioassay and LAMP testing of DNA extracted from baits. In these comparisons, P. agathidicida was detected more frequently using the LAMP test. In addition to greater sensitivity, by removing the need for culturing, the hybrid baiting plus LAMP approach is more cost effective than the extended soil bioassay and, importantly, does not require a centralised laboratory facility with specialised staff, consumables, and equipment. Such testing will allow us to address outstanding questions about P. agathidicida. For example, the hybrid approach could enable monitoring of the pathogen beyond areas with visible disease symptoms, allow direct evaluation of rates and patterns of spread, and allow the effectiveness of disease control to be evaluated. The hybrid LAMP bioassay also has the potential to empower local communities to evaluate the pathogen status of local kauri stands, providing information for disease management and conservation initiatives.

Rapid detection of Pecan Root-Knot Nematode, Meloidogyne partityla, in laboratory and field conditions using loop-mediated isothermal amplification.. [DOI: 10.1101/2020.01.09.900076] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Meloidogyne partityla is the dominant root-knot nematode (RKN) species parasitizing pecan in Georgia. This species is known to cause a reduction in root growth and a decline in yields from mature pecan trees. Rapid and accurate diagnosis of this RKN is required to control this nematode disease and reduce losses in pecan production. In this study, a loop-mediated isothermal amplification (LAMP) method was developed for simple, rapid and on-site detection of M. partityla in infested plant roots and validated to detect the nematode in laboratory and field conditions. Specific primers were designed based on the sequence distinction of internal transcribed spacer (ITS)-18S/5.8S ribosomal RNA gene between M. partityla and other Meloidogyne spp. The LAMP detection technique could detect the presence of M. partityla genomic DNA at a concentration as low as 1 pg, and no cross reactivity was found with DNA from other major RKN species such as M. javanica, M. incognita and M. arenaria, and M. hapla. We also conducted a traditional morphology-based diagnostic assay and conventional polymerase chain reaction (PCR) assay to determine which of these techniques was less time consuming, more sensitive, and convenient to use in the field. The LAMP assay provided more rapid results, amplifying the target nematode species in less than 60 min at 65°C, with results 100 times more sensitive than conventional PCR (~2-3 hrs). Morphology-based, traditional diagnosis was highly time-consuming (2 days) and more laborious than conventional PCR and LAMP assays. These features greatly simplified the operating procedure and made the assay a powerful tool for rapid, on-site detection of pecan RKN, M. partityla. The LAMP assay will facilitate accurate pecan nematode diagnosis in the field and contribute to the management of the pathogen.

Molecular Approaches for Low-Cost Point-of-Care Pathogen Detection in Agriculture and Forestry

Early detection of plant diseases is a crucial factor to prevent or limit the spread of a rising infection that could cause significant economic loss. Detection test on plant diseases in the laboratory can be laborious, time consuming, expensive, and normally requires specific technical expertise. Moreover, in the developing countries, it is often difficult to find laboratories equipped for this kind of analysis. Therefore, in the past years, a high effort has been made for the development of fast, specific, sensitive, and cost-effective tests that can be successfully used in plant pathology directly in the field by low-specialized personnel using minimal equipment. Nucleic acid-based methods have proven to be a good choice for the development of detection tools in several fields, such as human/animal health, food safety, and water analysis, and their application in plant pathogen detection is becoming more and more common. In the present review, the more recent nucleic acid-based protocols for point-of-care (POC) plant pathogen detection and identification are described and analyzed. All these methods have a high potential for early detection of destructive diseases in agriculture and forestry, they should help make molecular detection for plant pathogens accessible to anyone, anywhere, and at any time. We do not suggest that on-site methods should replace lab testing completely, which remains crucial for more complex researches, such as identification and classification of new pathogens or the study of plant defense mechanisms. Instead, POC analysis can provide a useful, fast, and efficient preliminary on-site screening that is crucial in the struggle against plant pathogens.