Impact of nickel mining in New Caledonia assessed by compositional data analysis of lichens

Portable X-ray fluorescence spectrometry: a cost-effective method for analysing trace metals in deposited dust

For projects requiring extensive environmental sampling and rapid decision-making to identify trace metal contamination using dust wipes, the cost and time required for wet chemistry analysis can be prohibitive. Under such circumstances there is a need for a suitable screening method that is cost-effective, efficient, and portable. To address this need, this study investigated the utility of portable X-ray fluorescence (pXRF) for the analysis of trace metals in dust wipes. Here, 316 dust wipe samples from three different geographical settings co-located with mining and smelting operations were investigated for their trace metal loadings (μg m-2) of arsenic (As), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb), and zinc (Zn) using pXRF. Results collected using pXRF were compared against inductively coupled plasma mass spectrometry (ICP-MS) concentrations using matched dust wipes (n = 87) to assess reproducibility. A subset of dust wipes (n = 4) were subject to different pXRF analytical scenarios (ranging from 1 to 12 pXRF measurements) using a standardised test duration of 30 seconds to identify the most efficient number of tests for analytical precision. Conducting four pXRF tests on a single wipe (total exposure time of 120 seconds) returned comparable results to ICP-MS and was adopted for analysis of all samples. Results from dust wipes analysed with both ICP-MS and pXRF (n = 87) showed moderate to strong Spearman Rho correlations (rs = 0.489-0.956, p < 0.01) and linear regression coefficients of variation demonstrated good agreement between methods (R2 = 0.432-0.989, p < 0.05). Linear regression equations were used to correct pXRF data to the ICP-MS dust wipe data for samples analysed by both approaches, and applied to pXRF data that were not subject to ICP-MS analysis (n = 229). Application of the correction formula resulted in a substantial improvement of pXRF's accuracy and precision, confirming its effectiveness for assessing trace metals in dust wipes.

Tracing nickel smelter emissions using European honey bees

This study investigated trace element contamination in honey bees inhabiting urban areas around the South Pacific's largest and longest operating nickel smelter in Nouméa, New Caledonia. There remains a paucity of research on the environmental impact of nickel smelting, and to date, there has been no assessment of its effects on the popular practice of beekeeping, or whether honey bees are a suitable tracer for nickel smelting emissions. Honey bees and honey were sampled from 15 hives across Nouméa to ascertain linkages between nickel smelter emissions, environmental contamination, and trace element uptake by bees. Comparison of washed and unwashed bees revealed no significant difference in trace element concentrations, indicating trace elements bioaccumulate within the internal tissues of bees over time. Accordingly, trace element concentrations were higher in dead bees than those that were sampled live, with smelter related elements chromium, cobalt and nickel being significantly different at p < 0.05. Except for boron, trace element concentrations were consistently higher in bees than in honey, suggesting that the transfer of trace elements from bees during honey production is negligible. Elevated concentrations of potentially toxic trace elements including cobalt, chromium and nickel in bees declined with distance from smelting operations (Spearman's Rho, p < 0.05), indicating the relationship between environmental contamination and the uptake of trace elements by bees. The findings of this study emphasise potential environmental and human health risks associated with trace element contamination from nickel smelting operations and affirm the use of honey bees as a biomonitor of potentially harmful nickel smelting emissions.

International Analysis of Sources and Human Health Risk Associated with Trace Metal Contaminants in Residential Indoor Dust

People spend increasing amounts of time at home, yet the indoor home environment remains understudied in terms of potential exposure to toxic trace metals. We evaluated trace metal (and metalloid) concentrations (As, Cu, Cr, Mn, Ni, Pb, and Zn) and health risks in indoor dust from homes from 35 countries, along with a suite of potentially contributory residential characteristics. The objective was to determine trace metal source inputs and home environment conditions associated with increasing exposure risk across a range of international communities. For all countries, enrichments compared to global crustal values were Zn > Pb > Cu > As > Cr > Ni; with the greatest health risk from Cr, followed by As > Pb > Mn > Cu > Ni > Zn. Three main indoor dust sources were identified, with a Pb-Zn-As factor related to legacy Pb sources, a Zn-Cu factor reflecting building materials, and a Mn factor indicative of natural soil sources. Increasing home age was associated with greater Pb and As concentrations (5.0 and 0.48 mg/kg per year of home age, respectively), as were peeling paint and garden access. Therefore, these factors form important considerations for the development of evidence-based management strategies to reduce potential risks posed by indoor house dust. Recent findings indicate neurocognitive effects from low concentrations of metal exposures; hence, an understanding of the home exposome is vital.

Trace element contamination of soil and dust by a New Caledonian ferronickel smelter: Dispersal, enrichment, and human health risk

Metallurgical industries remain a considerable source of trace element contamination and potential human health risk. Determination of sources is a key challenge. With respect to the South Pacific's largest and longest operating metallurgic smelter in Nouméa, New Caledonia, determining the environmental impact and subsequent human health risk associated with local ferronickel smelting is complicated by natural geological enrichment of Ni and Cr. This study applies a multi-method and multi-matrix approach to disentangle smelter emissions from geogenic sources and model the consequent health risk from industrial activity. Dust wipes (n = 108), roadside soil (n = 91), garden soil (n = 15) and household vacuum dust (n = 39) were assessed to explore geospatial trace element (As, Cr, Cu, Fe, Mn, Ni, Pb, S, V and Zn) variations across outdoor and indoor environments. Enrichment factors (EF) identified elevated levels of smelter-related trace elements: S (EF = 7), Ni (EF = 6) and Cr (EF = 4), as well as Zn (EF = 4). Smelter-related elements in soil and dust deposits were negatively correlated with distance from the facility. Similarity of Pb isotopic compositions between dust wipes, surface soil and vacuum dust indicated that potentially toxic trace elements are being tracked into homes. Non-carcinogenic health risk modelling (Hazard Index, HI) based on 15 spatial nodes across Nouméa revealed widespread exceedance of tolerable risk for children (0-2 years) for Ni (HI 1.3-15.8) and Mn (HI 0.6-1.8). Risk was greatest near the smelter and to the north-west, in the direction of prevailing wind. Given the elevated cancer risk documented in New Caledonia, disentanglement of environmental from industrial sources warrants further attention to ensure community health protection. Our analysis illustrates how the confounding effects from complex environmental factors can be distilled to improve the accuracy of point source apportionment to direct future mitigation strategies.

Nickel spreading assessment in New Caledonia by lichen biomonitoring coupled to air mass history

Lichen biomonitoring and air mass trajectories were used to study the influence of mining activities in the atmospheric dispersion of metallic elements to assess the exposure of the population to dust emitted by mining activities. A map of forward trajectory densities from open mine surfaces throughout New Caledonia was computed and allowed to identify three preferred wind directions (trade wind, bent trade winds and oceanic winds) that could arise in mining particles dispersion all over New Caledonia. Areas where an air quality monitoring would be advisable to evaluate the exposure of the population to the Nickel dusts have been identified. Lichens collected around the industrial mining site KNS and in North Provence of New Caledonia were analysed for their Ni, Co, Cr, Zn and Ti contents. Backward trajectories were simulated from the lichen sampling point using FLEXTRA fed with ECMWF meteorological data, and densities of trajectories having overflown a mine were calculated. Ratio metal/Ti was then plotted as a function of air mass trajectory densities having overflown open pits. A positive correlation between trajectory densities and titanium-normalized metal in lichen for Ni, Co, Cr was highlighted, indicating that mining is a source of dispersion of these metals. For Zn, which is a tracer of fossil fuel or biomass (wood) combustion activity, no correlation was found. Graphical abstract.

Assessment of nickel bioavailability through chemical extractants and red clover (Trifolium pratense L.) in an amended soil: Related changes in various parameters of red clover

Application of immobilizing agents may efficiently reduce the bioavailability of nickel (Ni) in the soil. Here we report the effect of biochar (BC), gravel sludge (GS) and zeolite (ZE) as a sole treatment and their combinations on the bioavailability of Ni after their application into a Ni-polluted soil. The bioavailability of Ni after the application of immobilizing agents was assessed through an indicator plant (red clover) and chemical indicators of bioavailability like soil water extract (SWE), DTPA and Ca(NO₃)₂ extracts. Additionally, the effects of Ni bioavailability and immobilizing agents on the growth, physiological and biochemical attributes of red clover were also observed. Application of ZE significantly reduced Ni concentrations in all chemical extracts compared to rest of the treatments. Similarly, the combined application of BC and ZE (BC+ ZE) significantly reduced Ni concentrations, reactive oxygen species (ROS) whereas, significant enhancement in the growth, physiological and biochemical attributes along with an improvement in antioxidant defence machinery of red clover plant, compared to rest of the treatments, were observed. Furthermore, BC+ ZE treatment significantly reduced bioconcentration factor (BCF) and bioaccumulation factor (BAF) of Ni in red clover, compared to rest of the treatments. The Ni concentrations in red clover leaves individually reflected a good correlation with Ni concentrations in the extracts (SWE at R²=0.79, DTPA extract at R²=0.84 and Ca(NO₃)₂ extracts at R²=0.86). Our results indicate that combined application of ZE and BC can significantly reduce the Ni bioavailability in the soil while in parallel improve the antioxidant defence mechanism in plants.

Perturbation vectors to evaluate air quality using lichens and bromeliads: a Brazilian case study

Samples of one lichen species, Parmotrema crinitum, and one bromeliad species, Tillandsia usneoides, were collected in the state of Rio de Janeiro, Brazil, at four sites differently affected by anthropogenic pollution. The concentrations of aluminum, cadmium, copper, iron, lanthanum, lead, sulfur, titanium, zinc, and zirconium were determined by inductively coupled plasma-atomic emission spectroscopy. The environmental diagnosis was established by examining compositional changes via perturbation vectors, an underused family of methods designed to circumvent the problem of closure in any compositional dataset. The perturbation vectors between the reference site and the other three sites were similar for both species, although body concentration levels were different. At each site, perturbation vectors between lichens and bromeliads were approximately the same, whatever the local pollution level. It should thus be possible to combine these organisms, though physiologically different, for air quality surveys, after making all results comparable with appropriate correction. The use of perturbation vectors seems particularly suitable for assessing pollution level by biomonitoring, and for many frequently met situations in environmental geochemistry, where elemental ratios are more relevant than absolute concentrations.