Dental implant bioactive surface modifications and their effects on osseointegration: a review

Evaluation of osteoblast response to polyacrylonitrile infused nano-curcumin coated on titanium discs: Invitro study cell culture experimental study

Purpose

The study evaluated the influence of titanium discs, coated with polyacrylonitrile infused curcumin nanofibers on osteoblast activity.

Materials and methods

The titanium discs were coated with polyacrylonitrile nanofibers infused with curcumin. MG-63 cell lines were utilized for cell culture to assess osteoblast morphology upon exposure of curcumin on titanium discs. SEM comparison was made. Lactate Dehydrogenase (LDH) activity was measured after 2 and 7 days and the Alkaline Phosphatase (ALP) activity of the cells was quantified.

Results

The results indicated that the coating had a notable impact on mineralization, LDH and ALP activities. Significant differences were observed between uncoated and coated samples. The SEM analysis indicated that curcumin enhanced bone growth when the Ti discs coated with curcumin are implanted in the bone.

Conclusion

Polyacrylonitrile infused nano-curcumin fibers coated on titanium discs potentially enhanced osteoblast response and mineralization.

Bioactive surface modifications on dental implants: a systematic review and meta-analysis of osseointegration and longevity

BACKGROUND

Bioactive surface modifications have been proposed to enhance osseointegration and longevity of dental implants. This study aimed to systematically review and perform a meta-analysis on the effectiveness of various bioactive coatings in promoting bone integration and improving implant longevity.

METHODS

A systematic review was conducted, including studies that investigated bioactive surface modifications on titanium dental implants. Outcomes of interest were bone-to-implant contact (BIC) and implant longevity over a 30-day period. Data were extracted and analyzed using RevMan 5 (version 5.4.1), with forest plots generated to represent the mean difference (MD) and 95% confidence intervals (CI) under a random effects model.

RESULTS

The meta-analysis showed a significant improvement in BIC for surface-modified implants, with an overall MD of 7.29 (95% CI [2.94, 11.65]). Heterogeneity analysis indicated moderate heterogeneity (Tau² = 18.57, Chi² = 16.08, df = 8, P = 0.04, I² = 50%). The test for overall effect yielded Z = 3.28 (P = 0.001). For implant longevity, the overall MD was 7.52 (95% CI [3.18, 11.85]), with moderate heterogeneity (Tau² = 17.28, Chi² = 14.95, df = 8, P = 0.06, I² = 47%). The test for overall effect yielded Z = 3.40 (P = 0.0007).

CONCLUSION

Bioactive surface changes significantly improved osseointegration and lifespan of dental implants. Collagen-based coatings consistently encouraged early bone integration, while BMP-2 combinations were effective for osseointegration. Optimizing bioactive agent doses and combinations was critical for achieving desired outcomes.

The Biocompatibility and the Effect of Titanium and PEKK on the Osseointegration of Customized Facial Implants

The purpose of this study was to investigate the optimization of computer-aided design/computer-aided manufacturing (CAD/CAM) patient-specific implants for mandibular facial bone defects and compare the biocompatibility and osseointegration of machined titanium (Ma), Sandblasted/Large-grit/Acid-etched (SLA) titanium, and polyetherketoneketone (PEKK) facial implants. We hypothesized that the facial implants made of SLA titanium had superior osseointegration when applied to the gonial angle defect and prevented the senile atrophy of the bone. Histologic findings of the soft-tissue reaction, hard-tissue reaction, and bone-implant contact (BIC (%) of 24 Ma, SLA, and PEKK facial implants at 8 and 12 weeks were investigated. There was no statistical difference in the soft tissue reaction. Bone was formed below the periosteum in all facial implants at 12 weeks and the BIC values were significantly different at both 8 and 12 weeks (p < 0.05). Ma, SLA, and PEKK facial implants are biocompatible with osseointegration properties. SLA can enhance osseointegration and provoke minimal soft tissue reactions, making them the most suitable choice. They provide an excellent environment for bone regeneration and, over the long term, may prevent atrophy caused by an aging mandible. The bone formation between the lateral surface of the facial implant and periosteum may assist in osseointegration and stabilization.

A forecasting model for suitable dental implantation in canine mandibular premolar region based on finite element analysis

In recent years, dental implants have become a trend in the treatment of human patients with missing teeth, which may also be an acceptable method for companion animal dentistry. However, there is a gap challenge in determining appropriate implant sizes for different dog breeds and human. In this study, we utilized skull computed tomography data to create three-dimensional models of the mandibles of dogs in different sizes. Subsequently, implants of various sizes were designed and subjected to biomechanical finite element analysis to determine the optimal implant size. Regression models were developed, exploring the relationship between the average weight of dogs and the size of premolar implants. Our results illustrated that the regression equations for mean body weight (x, kg) and second premolar (PM2), third premolar (PM3), and fourth premolar (PM4) implant length (y, mm) in dogs were: y = 0.2785x + 7.8209, y = 0.2544x + 8.9285, and y = 0.2668x + 10.652, respectively; the premolar implant diameter (mm) y = 0.0454x + 3.3506, which may provide a reference for determine suitable clinical implant sizes for dogs.

A randomized controlled trial of immediate implant placement comparing hydroxyapatite nano-coated and uncoated sandblasted/acid-etched implants using a digital surgical guide

PURPOSE

This study evaluated the implant stability, volumetric changes, and patient-reported outcome measures (PROMs) of hydroxyapatite (HA) nano-coated sandblasted/acid-etched (SLA) implants compared to uncoated SLA implants.

METHODS

Forty patients were recruited and randomly allocated to HA nano-coated SLA group (test, n = 20) and uncoated SLA group (control, n = 20) using single-blinded/block randomization. Implants were immediately placed in maxillary posterior region using a digital surgical guide. Insertion torque and implant stability quotient (ISQ) were measured at implant surgery and 1, 2, 3, and 4 months postoperatively. Intraoral scans, PROMs and soft tissue inflammation data were collected, and multivariable linear regression analysis of ISQ was performed.

RESULTS

In total, 48 implants (test; n = 24, control; n = 24) in 37 patients (test; n = 19, control; n = 18) were analyzed. Despite no significant between-group difference at surgery, the test group showed higher ISQ values than the control group at 2 (76.53 ± 4.17 vs. 71.32 ± 4.79, p < 0.01), 3 (77.45 ± 4.41 vs. 73.85 ± 4.69, p < 0.05), and 4 months (79.08 ± 2.96 vs. 73.43 ± 3.52, p < 0.0001) postoperatively. There were no significant differences in linear and volumetric changes, PROMs, and soft tissue inflammation analysis between two groups. The ISQ at implant surgery was influenced by age and diabetes mellitus (DM) at the implant level and DM and predicted total bone-to-implant contact area at the patient level.

CONCLUSION

HA nano-coated SLA implants promoted favorable immediate implants stability during early osseointegration phase compared to uncoated SLA implants, but displayed similar dimensional changes, PROMs, and soft tissue inflammation outcomes.

TRIAL REGISTRATION

Clinical Research Information Service (CRIS), KCT0006364. Registered 21 July 2021, https://cris.nih.go.kr/cris/search/detailSearch.do?seq=24221&search_page=L .

Influence of chitosan and Cissus quandrangularis coating on osseointegration in titanium implants in rabbits: A preclinical in vivo study

BACKGROUND

Titanium (Ti) implants has been criticized for the tiring wait for osseointegration, often making the patient reconsider implant treatment. Surface treated Ti implants are emerging as a promising solution with superior osseointegration, early loading protocols and shortened period of edentulousness. The aim of this study is to assess the osseointegration of Ti surface coated with novel Cissus quandrangularis Chitosan Hydrogel (CqChH) compared to Commercially pure (Cp) implants.

METHODS

24 Cp Ti implants were divided into 2 subgroups (n = 12). The test group consisted of Ti implants surface treated with the novel hydrogel and control group consisted of Cp Ti implants. 3 % CqChH was prepared and was coated on the Ti implants prior to placement in the femur and tibial heads of rabbits. Implant Stability Quotient (ISQ) was recorded at the 6th and 12th week. Animals were sacrificed and subjected to Removal Torque Quotient (RTQ). The samples were retrieved en bloc and stained for histopathologic analysis. The collected data was subjected to statistical analysis using Unpaired student t-Test.

RESULTS

At the end of 6th week CqChH coated implants did not show any statistically significant difference in both ISQ and RTQ values compared to Cp ones. However, at the end of the 12th week CqChH coated implants demonstrated significantly higher ISQ (73.91 ± 4.39) and RTQ (75.96 ± 14.10) compared to Cp ones.

CONCLUSIONS

This study demonstrated that the novel hydrogel coating applied to the implant's surface exhibited not only enhanced bone regeneration but also elicited a new bone formation.

Loading rutin on surfaces by the layer-by-layer assembly technique to improve the oxidation resistance and osteogenesis of titanium implants in osteoporotic rats

The purpose of this study was to construct a rutin-controlled release system on the surface of Ti substrates and investigate its effects on osteogenesis and osseointegration on the surface of implants. The base layer, polyethylenimine (PEI), was immobilised on a titanium substrate. Then, hyaluronic acid (HA)/chitosan (CS)-rutin (RT) multilayer films were assembled on the PEI using layer-by-layer (LBL) assembly technology. We used scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and contact angle measurements to examine all Ti samples. The drug release test of rutin was also carried out to detect the slow-release performance. The osteogenic abilities of the samples were evaluated by experiments on an osteoporosis rat model and MC3T3-E1 cells. The results (SEM, FTIR and contact angle measurements) all confirmed that the PEI substrate layer and HA/CS-RT multilayer film were effectively immobilised on titanium. The drug release test revealed that a rutin controlled release mechanism had been successfully established. Furthermore, thein vitrodata revealed that osteoblasts on the coated titanium matrix had greater adhesion, proliferation, and differentiation capacity than the osteoblasts on the pure titanium surface. When MC3T3-E1 cells were exposed to H2O2-induced oxidative stressin vitro, cell-based tests revealed great tolerance and increased osteogenic potential on HA/CS-RT substrates. We also found that the HA/CS-RT coating significantly increased the new bone mass around the implant. The LBL-deposited HA/CS-RT multilayer coating on the titanium base surface established an excellent rutin-controlled release system, which significantly improved osseointegration and promoted osteogenesis under oxidative stress conditions, suggesting a new implant therapy strategy for patients with osteoporosis.

Dental biomechanics of root-analog implants in different bone types

STATEMENT OF PROBLEM

When implants are applied to restore oral function, the masticatory load on the crown will lead to stress development in all parts of the crown-abutment-implant-bone system. An optimal design of the whole system will be important for sustained function.

PURPOSE

The purpose of this 3-dimensional (3D) finite element analysis (FEA) study was to evaluate the influence of the root-analog implant (RAI) design in molar rehabilitation and bone type.

MATERIAL AND METHODS

Twelve 3D models of single posterior implant-supported restorations were created according to the zirconia implant design (monotype, 2-piece, or RAI) and bone type (D1, D2, D3, and D4, according to the Misch classification). The models were composed of cortical bone, cancellous bone, implant, cement layers, and a monolithic ceramic crown. For the 2-piece zirconia implant model, the titanium base, prosthetic screw, and framework were also designed. All materials were assumed to behave elastically throughout the entire analysis. The bone was fixed, and an axial loading of 600 N was applied to the contacts on the occlusal surface of the crowns. Results for the crown and implant were obtained in maximum principal stress, as well as the von Mises stress for the model and bone microstrain.

RESULTS

High stress concentration was observed at the intaglio surface of the crowns near the loading region. Regardless of the design, the stress trend in the implant was similar, increasing proportionally to the bone type (D1>D2>D3>D4). RAI showed a homogeneous stress field near the values calculated for the conventional designs, but with lower magnitudes. The 2-piece zirconia model showed the highest stress magnitude regardless of the bone type and, therefore, the highest failure risk. All models showed a higher strain in the cortical bone than in the cancellous bone, located predominantly in the cervical region. A strain analysis showed that both conventional implant models presented similar behavior for D1 and D2 bone types, with an increasing difference for D3 and D4. RAI showed the lowest strain regardless of the bone type.

CONCLUSIONS

Root-analog zirconia implants present a promising biomechanical behavior for dissipating the masticatory load in comparison with conventional screw-shaped implants.

Evaluate the effects of low-intensity pulsed ultrasound on dental implant osseointegration under type II diabetes

Objective: The objective of this study is to assess the impact of low-intensity pulsed ultrasound (LIPUS) therapy on the peri-implant osteogenesis in a Type II diabetes mellitus (T2DM) rat model. Methods: A total of twenty male Sprague-Dawley (SD) rats were randomly allocated into four groups: Control group, T2DM group, Control-LIPUS group, and T2DM-LIPUS group. Implants were placed at the rats' bilateral maxillary first molar sites. The LIPUS treatment was carried out on the rats in Control-LIPUS group and T2DM-LIPUS group, immediately after the placement of the implants, over three consecutive weeks. Three weeks after implantation, the rats' maxillae were extracted for micro-CT, removal torque value (RTV), and histologic analysis. Results: Micro-CT analysis showed that T2DM rats experienced more bone loss around implant cervical margins compared with the non-T2DM rats, while the LIPUS treated T2DM rats showed similar bone heights to the non-T2DM rats. Bone-implant contact ratio (BIC) were lower in T2DM rats but significantly improved in the LIPUS treated T2DM rats. Bone formation parameters including bone volume fraction (BV/TV), trabecular thickness (Tb.Th), bone mineral density (BMD) and RTV were all positively influenced by LIPUS treatment. Histological staining further confirmed LIPUS's positive effects on peri-implant new bone formation in T2DM rats. Conclusion: As an effective and safe treatment in promoting osteogenesis, LIPUS has a great potential for T2DM patients to attain improved peri-implant osteogenesis. To confirm its clinical efficacy and to explore the underlying mechanism, further prospective cohort studies or randomized controlled trials are needed in the future.

Evaluation of bone apposition on surface modified titanium implant in experimental animal model: A systematic review and meta-analysis

Purpose

To evaluate the response of peri-implant bone to smooth (machined) surface and surface-modified dental implants in healthy experimental animal models.

Materials and Methods

Systematic electronic search was done for using PUBMED, SCOPUS, WEB OF SCIENCE, and EMBASE databases for potentially relevant records from the last 20 years. Duplicate screening and data extraction were performed to formulate the evidence tables and meta-analysis following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. The outcome criteria were: 1. Bone Implant Contact (BIC) in percentage, 2. Removal Torque Values (RTV) in Ncm, 3. Implant stability Quotient (ISQ), Quality assessment was done using the ARRIVE (Animal Research: Reporting of In Vivo Experiments) guidelines and SYRCLE RoB (Systematic Review Centre for Laboratory Animal Experimentation Risk of Bias) tool.

Results

Results were expressed as pooled mean difference for the respective groups viz. sandblasted and acid etched, laser modified, acid etched and anodized surface. The surface modified implants revealed somewhat higher BIC over machined surface (P < 0.01). Forest plot were drawn for all the outcome variables.

Conclusions

Within the limitations of this study, the authors found a higher degree of osseointegration pertaining to bone to implant interface, RTV, and implant stability quotient (ISQ) with surface modified procedures which seemed to promote bone formation around peri-implant tissue during the early stages of healing. After analyzing all 37 included publications for the outcome of interest (BIC%, RTV, ISQ), a positive outcome was obtained for both subtractive and additive implant surface modifying procedures over machined implant surfaces when the data were pooled together. More advanced research work on healthy animal models needs to be investigated to review the impact of surface modifications on dental implant osseointegration.

Titanium alloys with varying surface micro-area potential differences have antibacterial abilities and a favorable cellular response

OBJECTIVES

Surface micro-area potential difference (MAPD) can achieve bacteriostatic performance independent of metal ion dissolution. To study the influence of MAPD on antibacterial properties and the cellular response, Ti-Ag alloys with different surface potentials were designed and prepared by changing the preparation and heat treatment processes.

MATERIALS AND METHODS

Ti-Ag alloys (T4, T6, and S) were prepared by vacuum arc smelting, water quenching, and sintering. Cp-Ti was set as a control group in this work. The microstructures and surface potential distributions of the Ti-Ag alloys were analyzed by SEM and energy dispersive spectrometry. Plate counting and live/dead staining methods were used to evaluate the antibacterial properties of the alloys, and the mitochondrial function, ATP levels, and apoptosis were assessed in MC3T3-E1 cells to analyze the cellular response.

RESULTS

Due to the formation of the Ti-Ag intermetallic phase in the Ti-Ag alloys, Ti-Ag (T4) without the Ti-Ag phase had the lowest MAPD, Ti-Ag (T6) with a fine Ti2Ag phase had a moderate MAPD, and Ti-Ag (S) with a Ti-Ag intermetallic phase had the highest MAPD. The primary results demonstrated that the Ti-Ag samples with different MAPDs exhibited different bacteriostatic effects, ROS expression levels, and apoptosis-related protein expression levels in cells. The alloy with a high MAPD exhibited a strong antibacterial effect. A moderate MAPD stimulated cellular antioxidant regulation (GSH/GSSG) and downregulated the expression of intracellular ROS. MAPD could also promote the transformation of the inactive mitochondria to biologically active mitochondria by increasing the ΔΨm and reducing apoptosis.

CONCLUSION

The results here indicated that moderate MAPD not only had bacteriostatic effects but also promoted mitochondrial function and inhibited cell apoptosis, which provides a new strategy to improve the surface bioactivity of titanium alloys and a new idea for titanium alloy design.

CLINICAL RELEVANCE

There are some limitations of the mechanism of MAPD. However, researchers will become increasingly aware of the advantages and disadvantages of MAPD and MAPD might provide an affordable solution of peri-implantitis.

Nitrilotriacetic Acid Improves Plasma Electrolytic Oxidation of Titanium for Biomedical Applications

Dental implants have become a routine, affordable, and highly reliable technology to replace tooth loss. In this regard, titanium and its alloys are the metals of choice for the manufacture of dental implants because they are chemically inert and biocompatible. However, for special cohorts of patients, there is still a need for improvements, specifically to increase the ability of implants to integrate into the bone and gum tissues and to prevent bacterial infections that can subsequently lead to peri-implantitis and implant failures. Therefore, titanium implants require sophisticated approaches to improve their postoperative healing and long-term stability. Such treatments range from sandblasting to calcium phosphate coating, fluoride application, ultraviolet irradiation, and anodization to increase the bioactivity of the surface. Plasma electrolytic oxidation (PEO) has gained popularity as a method for modifying metal surfaces and delivering the desired mechanical and chemical properties. The outcome of PEO treatment depends on the electrochemical parameters and composition of the bath electrolyte. In this study, we investigated how complexing agents affect the PEO surfaces and found that nitrilotriacetic acid (NTA) can be used to develop efficient PEO protocols. The PEO surfaces generated with NTA in combination with sources of calcium and phosphorus were shown to increase the corrosion resistance of the titanium substrate. They also support cell proliferation and reduce bacterial colonization and, hence, lead to a reduction in failed implants and repeated surgeries. Moreover, NTA is an ecologically favorable chelating agent. These features are necessary for the biomedical industry to be able to contribute to the sustainability of the public healthcare system. Therefore, NTA is proposed to be used as a component of the PEO bath electrolyte to obtain bioactive surface layers with properties desired for next-generation dental implants.

The Sympathetic Nervous System in Dental Implantology

The sympathetic nervous system plays a vital role in various regulatory mechanisms. These include the well-known fight-or-flight response but also, for example, the processing of external stressors. In addition to many other tissues, the sympathetic nervous system influences bone metabolism. This effect could be highly relevant concerning osseointegration, which is responsible for the long-term success of dental implants. Accordingly, this review aims to summarize the current literature on this topic and to reveal future research perspectives. One in vitro study showed differences in mRNA expression of adrenoceptors cultured on implant surfaces. In vivo, sympathectomy impaired osseointegration in mice, while electrical stimulation of the sympathetic nerves promoted it. As expected, the beta-blocker propranolol improves histological implant parameters and micro-CT measurements. Overall, the present data are considered heterogeneous. However, the available publications reveal the potential for future research and development in dental implantology, which helps to introduce new therapeutic strategies and identify risk factors for dental implant failure.

Osteogenic and anti-inflammatory effects of SLA titanium substrates doped with chitosan-stabilized selenium nanoparticles via a covalent coupling strategy

Osseointegration is a prerequisite for the function of dental implants, and macrophage-dominated immune responses triggered by implantation determine the outcome of ultimate bone healing mediated by osteogenic cells. The present study aimed to develop a modified titanium (Ti) surface by covalently immobilizing chitosan-stabilized selenium nanoparticles (CS-SeNPs) to sandblasted, large grit, and acid-etched (SLA) Ti substrates and further explore its surface characteristics as well as osteogenic and anti-inflammatory activities in vitro. CS-SeNPs were successfully prepared by chemical synthesis and characterized their morphology, elemental composition, particle size, and Zeta potential. Subsequently, three different concentrations of CS-SeNPs were loaded to SLA Ti substrates (Ti-Se1, Ti-Se5, and Ti-Se10) using a covalent coupling strategy, and the SLA Ti surface (Ti-SLA) was used as a control. Scanning electron microscopy images revealed different amounts of CS-SeNPs, and the roughness and wettability of Ti surfaces were less susceptible to Ti substrate pretreatment and CS-SeNP immobilization. Besides, X-ray photoelectron spectroscopy analysis showed that CS-SeNPs were successfully anchored to Ti surfaces. The results of in vitro study showed that the four as-prepared Ti surfaces exhibited good biocompatibility, with Ti-Se1 and Ti-Se5 groups showing enhanced adhesion and differentiation of MC3T3-E1 cells compared with the Ti-SLA group. In addition, Ti-Se1, Ti-Se5, and Ti-Se10 surfaces modulated the secretion of pro-/anti-inflammatory cytokines by inhibiting the nuclear factor kappa B pathway in Raw 264.7 cells. In conclusion, doping SLA Ti substrates with a modest amount of CS-SeNPs (1-5 mM) may be a promising strategy to improve the osteogenic and anti-inflammatory activities of Ti implants.

Layer-by-layer assembly of procyanidin and collagen promotes mesenchymal stem cell proliferation and osteogenic differentiation in vitro and in vivo

Collagen, commonly used in tissue engineering, is widespread in various tissues. During bone tissue regeneration, collagen can stimulate the cellular response and determine the fate of cells. In this work, we integrated collagen type II with procyanidin (PC) onto an implant coating by applying a layer-by-layer technique to demonstrate that collagen and PC can participate in the construction of new biomaterials and serve as multifunctional components. The effects of PC/collagen multilayers on the viability of cocultured bone marrow mesenchymal stem cells (BMSCs) were analyzed by cell counting kit-8 analysis and phalloidin staining. The reactive oxygen species level of BMSCs was revealed through immunofluorescent staining and flow cytometry. Osteogenesis-related genes were detected, and in vivo experiment was performed to reveal the effect of newly designed material on the osteogenic differentiation of BMSCs. Our data demonstrated that in BMSCs PC/collagen multilayers accelerated the proliferation and osteogenic differentiation through Wnt/β-catenin signaling pathway and enhanced bone generation around the implant in the bone defect model of rabbit femurs. In summary, combination of collagen and PC provided a new sight for the research and development of implant materials or coatings in the future.

Development of a system of heparin multilayers on titanium surfaces for dual growth factor release

The aim of the present study was to establish a modular platform of poly-L-lysine-heparin (PLL-Hep) polyelectrolyte multilayer (PEM) coatings on titanium surfaces for dual growth factor delivery of recombinant human bone morphogenic protein 2 (rhBMP2) and recombinant human vascular endothelial growth factor 165 (rhVEGF165) in clinically relevant quantities. Release characteristics for both growth factors differed significantly depending on film architecture. rhBMP2 induced activation of alkaline phosphatase in C2C12 cells and proliferation of human mesenchymal stem cells (hMSCs). rhVEGF mediated induction of von Willebrand factor (vWF) in hMSCs and proliferation of human umbilical vein endothelial cells. Osteogenic and angiogenic effects were modified by variation in cross-linking and architecture of the PEMs. By creating multilayer films with distinct zones, release characteristics and proportion of both growth factor delivery could be tuned and surface-activity modified to enhance angiogenic or osteogenic function in various ways. In summary, the system provides a modular platform for growth factor delivery that allows for individual composition and accentuation of angiogenic and osteogenic surface properties.

Stimulation of dental implant osseointegration by low-Intensity pulsed ultrasound: An in vivo preliminary study in a porcine model

PURPOSES

Several studies have evaluated the interest of Low Intensity Pulsed Ultrasound (LIPUS) in the osseointegration of dental implants in murine or rabbit models. However, the thinness and narrowness bones make it difficult to study the effect of LIPUS. The purpose of this study is to assess the ability of LIPUS to stimulate bone formation in contact with a titanium dental implant in a porcine model.

METHODS

Eight adults mini-pigs were used. An implant is placed on each tibial crest in the metaphysis. The right side was treated with LIPUS at 1 MHz and 300 mW/cm² of acoustic intensity during 15 minutes per day on 5 consecutive days and during 42 days. The left side was not treated. The Bone Volume/Total Volume ratio (BV/TV), the Intersection Surface (IS) of the volume of interest by the binarized bone and the Trabecular bone Thickness (TbTh) around the implant were analyzed.

RESULTS

At 42 days, BV/TV ratio is significantly higher on the treated side (42,1+/-8,76% versus 32,31+/-10,11%, p < 0,02); as well as TbTh with 0,13+/-0,01 mm versus 0,10+/-0,01 mm (p < 0,01). IS is also significantly higher on the treated side (40,7 +/- 12,68 mm² versus 33,68+/-9,44 mm² at 200 μm from the implant surface; p < 0,01).

CONCLUSION

The present study showed that LIPUS can significantly increase bone formation and accelerate the healing process at the bone-implant interface in a porcine model. Its low toxicity, low immunogenicity and non-invasion make it a complementary treatment of choice for improving the bone formation around titanium implants.

Emerging titanium surface modifications: The war against polymicrobial infections on dental implants

Abstract Dental implants made of titanium (Ti) material is recognized as the leading treatment option for edentulous patients’ rehabilitation, showing a high success rate and clinical longevity. However, dental implant surface acts as a platform for microbial adhesion and accumulation once exposed to the oral cavity. Biofilm formation on implant surfaces has been considered the main etiologic factor to induce inflammatory diseases, known as peri-implant mucositis and peri-implantitis; the latter being recognized as the key reason for late dental implant failure. Different factors, such as biofilm matrix production, source of carbohydrate exposure, and cross-kingdom interactions, have encouraged increased microbial accumulation on dental implants, leading to a microbiological community shift from a healthy to a pathogenic state, increasing inflammation and favoring tissue damage. These factors combined with the spatial organization of biofilms, reduced antimicrobial susceptibility, complex microbiological composition, and the irregular topography of implants hamper biofilm control and microbial killing. In spite of the well-known etiology, there is still no consensus regarding the best clinical protocol to control microbial accumulation on dental implant surfaces and treat peri-implant disease. In this sense, different coatings and Ti surface treatments have been proposed in order to reduce microbial loads and control polymicrobial infections on implantable devices. Therefore, this critical review aims to discuss the current evidence on biofilm accumulation on dental implants and central factors related to the pathogenesis process of implant-related infections. Moreover, the potential surface modifications with anti-biofilm properties for dental implant devices is discussed to shed light on further promising strategies to control peri-implantitis.

Drug-Releasing Gelatin Coating Reinforced with Calcium Titanate Formed on Ti–6Al–4V Alloy Designed for Osteoporosis Bone Repair

Ti–6Al–4V alloy has been widely used in the orthopedic and dental fields owing to its high mechanical strength and biocompatibility. However, this alloy has a poor bone-bonding capacity, and its implantation often causes loosening. Osteoporosis increases with the aging of the population, and bisphosphonate drugs such as alendronate and minodronate (MA) are used for the medical treatment. Reliable and multifunctional implants showing both bone bonding and drug releasing functions are desired. In this study, we developed a novel organic-inorganic composite layer consisting of MA-containing gelatin and calcium-deficient calcium titanate (cd–CT) with high bone-bonding and scratch resistance on Ti–6Al–4V alloy. The alloy with the composite layer formed apatite within 7 days in a simulated body fluid and exhibited high scratch resistance of an approximately 50 mN, attributable to interlocking with cd ± CT. Although the gelatin layer almost completely dissolved in phosphate-buffered saline within 6 h, its dissolution rate was significantly suppressed by a subsequent thermal crosslinking treatment. The released MA was estimated at more than 0.10 μmol/L after 7 days. It is expected that the Ti alloy with the MA-containing gelatin and cd–CT composite layer will be useful for the treatment of osteoporosis bone.

Influence of Sandblasting Process on Tribological Properties of Titanium Grade 4 in Artificial Saliva for Dentistry Applications

Titanium Grade 4 (Ti G4) is widely used in medicine for dental implants. The failure-free life of implants depends on their properties such as resistance to wear and friction processes. This paper presents an analysis of the influence of sandblasting on tribological wear of commercial dental implants made of TiG4 in artificial saliva. Tribological wear measurements were performed in a reciprocating motion in the ball-on-disc system. The scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS) method was used to characterize the surface of the implants before and after the tribological wear test. The microhardness of Ti G4 was measured before and after sandblasting by the Vickers method. The contact angle was determined by the method of sitting drop in air. The residual stress test using the X-Ray Diffraction (XRD) single-{hkl} sin2ψ method was carried out. The compressive residual stress of 324(7) MPa and surface hardening of Ti G4 was revealed after sandblasting with Al2O3 particles of 53-75 μm in diameter. It was found that sandblasting changes the surface wettability of Ti G4. The intermediate wettability of the mechanically polished surface and the hydrophobicity of the sandblasted surface was revealed. Sandblasting reduces the tribological wear and friction coefficient of Ti G4 surface in saliva. The three-body abrasion wear mechanism was proposed to explain the tribological wear of Ti G4 in saliva.

Survival rates of ultra-short (<6 mm) compared with short locking-taper implants supporting single crowns in posterior areas: A 5-year retrospective study

Background

Short and ultra‐short implants represent a predictable treatment, in terms of implant survival, with patients presenting insufficient available bone volumes. Moreover, single crown restorations represent a gold standard in terms of oral hygiene.

Purpose

The aim of this retrospective study was to evaluate implant survival, marginal bone loss, and peri‐implant complications in 333 locking‐taper short and ultra‐short implants.

Materials and Methods

Implants were placed in the maxillary and mandibular posterior regions of 142 patients. Clinical and radiographic examinations were performed at 5‐year recall appointments.

Results

All implants placed consisted of 8.0‐, 6.0‐, and 5.0‐mm length, 38.14%, 34.53%, and 27.33%, respectively. Three hundred thirty‐two implants (one early failure) were rehabilitated with single crowns in 141 patients. In 45.48% of the implants the crown‐to‐implant ratio was ≥2, with a mean value of 1.94. Overall implant‐based survival after 5 years of follow‐up was 96.10%: 96.85%, 95.65%, and 95.60% for 8.0‐, 6.0‐, and 5.0‐mm length implants, respectively (p = 0.82). Overall patient‐based survival was 91.55%. Regarding crestal bone level variations, average crestal bone loss and apical shift of the “first bone‐to‐implant contact point” position were 0.69 and 0.01 mm, respectively. Setting the threshold for excessive bone loss at 1 mm, during the time interval from loading to follow‐up, 28 implants experienced loss of supporting bone greater than 1 mm: 19 of them (67.85%) were surgically treated with a codified surgical regenerative protocol. After 60 months, a peri‐implantitis prevalence of 5.94% was reported, with an overall implant success of 94.06%: 95.93%, 92.73%, and 93.10% for 8.0‐, 6.0‐, and 5.0‐mm length implants, respectively (p = 0.55).

Conclusion

Long‐term outcomes suggest that short and ultra‐short locking‐taper implants can be successfully restored with single crowns in the posterior area of the maxilla and mandible.

Coating Polyelectrolyte Multilayers Loaded with Quercetin on Titanium Surfaces by Layer-By-Layer Assembly Technique to Improve Surface Osteogenesis Under Osteoporotic Condition

Titanium (Ti) and its alloy implants are widely used in the field of orthopedics, and osteoporosis is an important reason for implantation failure. This study aimed to establish a quercetin (QTN) controlled release system on the surface of titanium implants and to study its effects on osteogenesis and osseointegration on the surface of implants. Polyethylenimine (PEI) was first immobilized on a titanium substrate as the base layer, and then, hyaluronic acid/chitosan-quercetin (HA/CS-QTN) multilayer films were assembled on the PEI layer by a self-assembly technique. Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and contact angle measurements were used to characterize and analyze the samples. The release characteristics of QTN were studied by release assays. The osteogenic ability of the samples was evaluated by experiments on an osteoporosis rat model and MC3T3-E1 cells. The FTIR, SEM, and contact angle measurements all showed that the PEI substrate layer and HA/CS-QTN multilayer film were successfully immobilized on the titanium matrix. The drug release test showed the successful establishment of a QTN controlled release system. The in vitro results showed that osteoblasts exhibited higher adhesion, proliferation and differentiation ability on the coated titanium matrix than on the pure titanium surface. In addition, the in vivo results showed that the HA/CS-QTN coating significantly increased the new bone mass around the implant. By depositing a PEI matrix layer and HA/CS-QTN multilayer films on titanium implants, a controlled release system of QTN was established, which improved implant surface osseointegration under osteoporotic conditions. This study proposes a new implant therapy strategy for patients with osteoporosis.

Failure Risk of Short Dental Implants Under Immediate Loading: A Meta-Analysis

PURPOSE

Currently, there is no clear clinical evidence that short implants are suitable for immediate loading. Therefore, this meta-analysis aims to evaluate whether immediate loading increases the failure risk of short dental implants.

MATERIALS AND METHODS

This meta-analysis was registered at PROSPERO (CRD 42020195890). PubMed, Embase, and Cochrane Library databases were searched to collect all clinical studies comparing the failure rates of short dental implants (<10 mm) and standard implants (≥10 mm) under the condition of immediate loading and studies comparing the failure rates of short dental implants under immediate loading versus early or delayed loading. All of the clinical studies with available relevant data were eligible for inclusion. The Cochrane Risk of Bias tool was adopted to evaluate the risk of bias for the randomized controlled trial (RCT), while Newcastle-Ottawa Quality Assessment Scale (NOS) was used for the observational studies (OS). The OR value of each included study and its 95% CI were pooled to estimate the failure risk of short dental implants under immediate loading. The heterogeneity among studies was evaluated through Cochran's Q test and I² .

RESULTS

Seventeen studies, 5 RCTs and 12 OS studies, with a total of 2461 dental implants were analyzed. Four of the RCT studies were of low risk of bias and one was of unclear risk, while all of the OS studies were of moderate or high quality. Compared with standard implants, short implants did not have an increased failure risk under immediate loading (OR: 1.38, 95% CI: 0.67-2.84, p = 0.997, fixed model). In addition, the OR value of implant failure for short implants under immediate loading compared to that for short implants under early or delayed loading was 1.22 (95% CI: 0.33-4.55, p = 0.104, random model), which was also not significantly different.

CONCLUSIONS

There is not enough evidence to show that short dental implants under immediate loading may have higher implant failure risk compared to standard implants under immediate loading and short implants under early or delayed loading. Therefore, an immediate loading protocol may not increase the failure risk of short dental implants.

Osteogenic capability of strontium and icariin-loaded TiO2 nanotube coatings in vitro and in osteoporotic rats

Titanium (Ti) and Ti alloys are widely used biomaterials, but they lack osteogenic capability for rapid bone integration. To improve osseointegration of Ti implants, TiO2 nanotubes were prepared using the anodizing oxidation technique, and strontium (Sr) combined with icariin (ICA) was loaded on TiO2 nanotube coatings. Cell adhesion and proliferation of MC3T3-E1 cells, alkaline phosphatase (ALP) activity, mineralization of extracellular matrix, and bone formation around titanium implants in ovariectomized rats, were examined separately. The results showed that compared with pure Ti, TiO2 and Sr-loaded TiO2 coatings, the coatings loaded with both Sr and ICA showed better effect on cell adhesion and proliferation, higher ALP activity and more red-stained mineralized nodules. Furthermore, more bone was formed around implants loaded with both Sr and ICA in osteoporotic rats. Therefore, coating with Sr and ICA is valuable for clinical application to strengthen the osseointegration of titanium implants, especially in osteoporotic patients.

Dental Implants Loaded With Bioactive Agents Promote Osseointegration in Osteoporosis: A Review

Implant-supported dentures are widely used in patients with defect or loss of dentition because these have higher chewing efficiency and do not damage the adjacent teeth compared with fixed or removable denture. An implant-supported denture carries the risk of failure in some systemic diseases, including osteoporosis, because of a non-ideal local microenvironment. Clinically common physical and chemical modifications are used to change the roughness of the implant surface to promote osseointegration, but they have limitations in promoting osteoinduction and inhibiting bone resorption. Recently, many researchers have focused on the study of bioactive modification of implants and have achieved promising results. Herein we have summarized the progress in bioactive modification strategy to promote osseointegration by regulating the local osteoporotic microenvironment.

Stem-cell-derived ECM sheet-implant complexes for enhancing osseointegration

Numerous treatment methods have been developed to modify the surface of dental implants to improve cell migration and proliferation, removal torque, and osseointegration. Recent studies have constructed cell sheet-implant complexes with enhanced osteogenic capabilities. However, these complexes have some limitations, such as requirements for complex preparation processes, cell vitality maintenance, strict preservation conditions, and the induction of immunogenicity. Extracellular matrix (ECM) sheets without cells may be a more desirable material. To date, the effect of ECM sheets on implant osseointegration has not been reported. In this study, we fabricated ECM sheet-implant complexes through the combination of rat bone marrow mesenchymal stem cell (BMSC)-derived ECM sheets with sandblasted, large-grit, acid-etched (SLA) implants. These complexes were characterized by light microscopy, scanning electron microscopy (SEM), and immunofluorescence (IF) assays. The adhesion, proliferation, and osteogenic differentiation of BMSCs cultured on ECM sheets were detected in vitro. Then, the ECM sheet-implant complexes were transplanted into the metaphysis of the tibias of rats to evaluate the implant osseointegration in vivo. The results showed that ECM sheets were successfully constructed and showed significantly improved adhesion and proliferation. BMSCs cultured on ECM sheets upregulated the expression levels of the osteogenic-related genes alkaline phosphatase (ALP), bone morphogenetic protein 2 (BMP2), and runt-related transcription factor 2 (Runx2) compared to controls. In vivo, ECM sheet-implant complexes demonstrated superior new bone formation. Our findings proved that the BMSC-derived ECM sheets promoted osseointegration in vitro and in vivo. The current study indicated that the ECM sheet could be an ideal tissue engineering material, and ECM sheet-implant complexes could provide a strategy with low immunogenicity and easy storage and transportation. This research provides a novel strategy for the development of implant surface modification approaches.

Dental MRI: a road beyond CBCT

KEY POINTS

• Three-dimensional (3D) imaging coupled with computer-guided surgery planning is the core of the contemporary dental implant practice.• Magnetic resonance (MR)-based dental implant planning can achieve results comparable to those with cone beam computed tomography (CBCT)-based planning.• MR-based dental implant planning without radiation dose could be a potential alternative to CBCT-based planning.

Effect of Autoclaving Time on Corrosion Resistance of Sandblasted Ti G4 in Artificial Saliva

Titanium Grade 4 (Ti G4) is the most commonly used material for dental implants due to its excellent mechanical properties, chemical stability and biocompatibility. A thin, self-passive oxide layer with protective properties to corrosion is formed on its surface. However, the spontaneous TiO₂ layer is chemically unstable. In this work, the impact of autoclaving time on corrosion resistance of Ti G4 in artificial saliva solution with pH = 7.4 at 37 °C was studied. Ti G4 was sandblasted with white Al₂O₃ particles and autoclaved for 30–120 min. SEM, EDS, 2D roughness profiles, confocal laser scanning microscopy, and a Kelvin scanning probe were used for the surface characterization of the Ti G4 under study. In vitro corrosion resistance tests were conducted using open circuit potential, polarization curves, and electrochemical impedance spectroscopy measurements. It was found that Sa parameter, electron work function, and thickness of the oxide layers, determined based on impedance measurements, increased after autoclaving. The capacitive behavior and high corrosion resistance of tested materials were revealed. The improvement in the corrosion resistance after autoclaving was due to the presence of oxide layers with high chemical stability. The optimal Ti G4 surface for dentistry can be obtained by sandblasting with Al₂O₃ with an average grain size of 53 µm, followed by autoclaving for 90 min.

Osseointegration of a novel injection molded 2-piece ceramic dental implant: a study in minipigs

OBJECTIVES

This study compared the osseointegrative potential of a novel injection molded zirconia dental implant (Neodent Zi ceramic implant, test) and a commercially available titanium implant (Neodent Alvim implant, control) in terms of histomorphometrically derived bone-to-implant contact (BIC), first bone-to-implant contact (fBIC), and the ratio of bone area to total area (BATA) around the implant.

MATERIALS AND METHODS

A total of 36 implants, 18 per individual test device, were implanted in a split-mouth arrangement in either side of the edentulous and fully healed mandible of 6 minipigs. Histomorphometric analysis of BIC, fBIC, and BATA were performed 8 weeks post implantation and subjected to statistical non-inferiority testing. Surface characteristics of both implant types were compared in terms of contact angle, surface topography, and elemental composition.

RESULTS

BIC, fBIC, and coronal BATA values of test and control implants were statistically comparable and non-inferior. BIC values of 77.8 ± 6.9% vs. 80.7 ± 6.9% (p = 0.095) were measured for the test and control groups. fBIC lingual values were - 238 ± 328 μm compared with - 414 ± 511 μm (p = 0.121) while buccal values were - 429 ± 648 μm and - 588 ± 550 μm (p = 0.230) for the test and control devices, respectively. BATA in the apical segment was significantly higher in the test group compared with the control group (67.2 ± 11.8% vs. 59.1 ± 11.4%) (p = 0.0103). Surface topographies of both implant types were comparable. Surface chemical analysis indicated the presence of carbonaceous adsorbates which correlated with a comparable and predominantly hydrophobic character of the implants.

CONCLUSION

The results demonstrate that the investigated zirconia implants, when compared with a commercially available titanium implant, show equivalent and non-inferior bone integration, bone formation, and alveolar bone level maintenance. This qualifies the investigated zirconia implant as a potential candidate for clinical development.

CLINICAL RELEVANCE

This study investigated the osseointegration of a novel zirconia 2-piece dental implant prototype intended for clinical development. With the aim of translating this prototype into clinical development preclinical models, procedures and materials within this study have been selected as close to clinical practice and human physiological conditions as possible.

Osteoimmunomodulatory Effects of Enamel Matrix Derivate and Strontium Coating Layers: A Short- and Long-Term In Vivo Study

Over the past few years, surface modification of implant surfaces has gained substantial attention as a promising solution to avoid the failure of biomaterials after implantation. Although researchers suggest several strategies for surface functionalization of titanium-based implants, only a few studies have compared the osteoimmunomodulatory effects of ionic nanostructures and biofunctionalization in the same biological model. Enamel matrix derivate (EMD) and strontium are both known for their positive influences on bone cell responses. In this study, we functionalized the titanium-zirconium implant surface with EMD and strontium using an electrochemical cathodic polarization method. Afterward, we evaluated the osteoimmunomodulatory effects of EMD or strontium coated titanium-zirconium implants in the tibia of eight Gray Bastard Chinchilla rabbits. We performed 2 and 3D micro-CT, wound fluid, histologic, and histomorphometric analyses on bone tissues after 4- and 8-weeks of implantation. Although the results could indicate some differences between groups regarding the bone quality, there was no difference in bone amount or volume. EMD stimulated higher ALP activity and lower cytotoxicity in wound fluid, as well as a lower expression of inflammatory markers after 8 weeks indicating its osteoimmunomodulatory effects after implantation. Overall, the results suggested that ionic nanostructure modification and biofunctionalization might be useful in regulating the immune responses to implants.

Implant stability and survival rates of a hydrophilic versus a conventional sandblasted, acid-etched implant surface: Systematic review and meta-analysis

BACKGROUND

Modifying the implant surface via enhancing the wettability (hydrophilicity) improves osseointegration, reducing the healing period. In this study, the authors aimed to evaluate the stability and survival rates of implants with a hydrophilic surface compared with those with a sandblasted, acid-etched surface.

TYPES OF STUDIES REVIEWED

The included studies (randomized controlled trials) were identified through searches of PubMed, ScienceDirect, and Cochrane Library databases without date of publication restrictions. Quality assessment was performed using the Cochrane Collaboration tool. For primary outcome, confidence intervals were set at 95%; weighted means across the studies were calculated using a fixed-effects model or risk ratios and their 95% confidence intervals for secondary outcome.

RESULTS

The authors included 5 randomized controlled trials (246 dental implants) in the systematic review, which compared a hydrophilic with conventional sandblasted, acid-etched implant surface. The implant stability (primary outcome) was measured at baseline and 3, 6, and 8 weeks, and implant survival rates were measured as a secondary outcome. Overall, compared with the control groups, no clinically significant differences in implant stability or survival rates were identified for the hydrophilic surface groups.

CONCLUSIONS AND PRACTICAL IMPLICATIONS

The results did not show any clinically significant effect of a hydrophilic surface on improving implant stability or survival rates. However, these findings must be analyzed carefully owing to the limitations of this review, such as the small samples size and some differences among the included studies.

Graphene–Chitosan Hybrid Dental Implants with Enhanced Antibacterial and Cell-Proliferation Properties

Dental implants are widely used tooth replacement tools owing to their good oral rehabilitation and reconstruction capacities. Since dental implants are designed as a replacement for natural teeth, multi-functional abilities are desired to achieve successful implant treatment with improved osseointegration through promotion of mammalian cell activity and prevention of bacterial cell activity. In this study, we developed a graphene–chitosan hybrid dental implant (GC hybrid implant) using various concentrations of graphene, which demonstrated the different surface properties including increased wettability and roughness. Importantly, the GC hybrid implant under the optimal condition (i.e., 1% GC hybrid implant) could significantly promote osteoblast proliferation while reducing biofilm formation and bacterial activity. Our study demonstrates the potential of using this GC hybrid implant as a new type of dental implant, which can offer an effective design for the fabrication of advanced dental implants.

Osteogenic inducer sustained-release system promotes the adhesion, proliferation, and differentiation of osteoblasts on titanium surface

OBJECTIVE

Biomaterial can be locally applied to promote the osseointegration of dental implants. This study aimed to fabricate an osteogenic inducer (OI) sustained-release system and to evaluate its effects on the adhesion, proliferation, and differentiation of osteoblasts on titanium surfaces.

METHODS

First of all, different contents of OI solution were added to the poly (lactic-co-glycolic acid) (PLGA) gel individually to investigate the best physical properties and drug-release rate. Moreover, osteoblasts were isolated from the calvaria of two-month-old New Zealand rabbits through sequential enzymatic digestion. Osteoblasts were seeded onto the surface of Ti disks (control group), Ti coated with PLGA gel (PLGA group), and Ti coated with the OI sustained-release system (PLGA+OI group). Cell adhesion was observed by scanning electron microscopy. Cell proliferation was analyzed by cell counting kit-8. Cell differentiation was tested by alizarin red staining, alkaline phosphatase (ALP) activity and osteogenic-related gene expression.

RESULTS

The OI sustained-release system contained 15% OI solution had appropriate physical properties and drug-release rate. The osteoblasts in the PLGA+OI group were in a typical spindle shape with a considerable number indicating the promotion of adhesion and proliferation. The expression of early and late stage osteoblast differentiation genes in the PLGA+OI group were significantly higher than that of the control group and PLGA group at each time point. The PLGA group showed accelerated adhesion and differentiation but reduced proliferation compared with the control.

CONCLUSION

The OI sustained-release system promotes the adhesion, proliferation, and differentiation of osteoblasts on titanium surfaces. This system is a cost-effective osteoconductive biomaterial that might be promising for use in dental implantation.

Surface modification of titanium manufactured through selective laser melting inhibited osteoclast differentiation through mitogen-activated protein kinase signaling pathway

Selective laser melting used in manufacturing custom-made titanium implants becomes more popular. In view of the important role played by osteoclasts in peri-implant bone resorption and osseointegration, we modified selective laser melting-manufactured titanium surfaces using sandblasting/alkali-heating and sandblasting/acid-etching, and investigated their effect on osteoclast differentiation as well as their underlying mechanisms. The properties of the surfaces, including elements, roughness, wettability and topography, were analyzed. We evaluated the proliferation and morphology of primary mouse bone marrow-derived monocytes, as well as induced osteoclasts derived from bone marrow-derived monocytes, on samples. Then, osteoclast differentiation was determined by the tartrate-resistant acid phosphatase activity assay, calcitonin receptors immunofluorescence staining and the expression of osteoclast-related genes. The results showed that sandblasting/alkali-heating established nanonet structure with the lowest water contact angle, and both sandblasting/alkali-heating and sandblasting/acid-etching significantly decreased surface roughness and heterogeneity compared with selective laser melting. Surface modifications of selective laser melting-produced titanium altered bone marrow-derived monocyte morphology and suppressed bone marrow-derived monocyte proliferation and osteoclastogenesis in vitro (sandblasting/alkali-heating>sandblasting/acid-etching>selective laser melting). These surface modifications reduced the activation of extracellular signal-regulated kinase and c-Jun N-terminal kinases compared to native-selective laser melting. Sandblasting/alkali-heating additionally blocked tumor necrosis factor receptor-associated factor 6 recruitment. The results suggested that sandblasting/alkali-heating and sandblasting/acid-etching modifications on selective laser melting titanium could inhibit osteoclast differentiation through suppressing extracellular signal-regulated kinase and c-Jun N-terminal kinase phosphorylation in mitogen-activated protein kinase signaling pathway and provide a promising technique which might reduce peri-implant bone resorption for optimizing native-selective laser melting implants.

Tetracalcium phosphate and biphasic tetracalcium phosphate/tricalcium phosphate powders' effects evaluation on human osteoblasts

BACKGROUND

Calcium ions levels in bone niches have been demonstrated to severely influence new bone formation. Osteoinductive scaffolds containing calcium have been largely studied to control the release of calcium in bone regeneration and tissue engineering purpose. The aim of the present study was, firstly, to synthesize two different resorbable calcium phosphate-based powders, thought to be reservoirs of calcium ions, and secondary, to investigate their effects on human osteoblasts, in order to develop a suitable titanium coating material.

METHODS

Tetracalcium phosphate (A450) and biphasic tetracalcium phosphatae/tricalcium phosphate (A850) powders were prepared with an innovative method. The presence of calcium phosphate structures was chemically confirmed with XRD. Furthermore, powders macroscopic aspect was observed with a stereomicroscope. For in-vitro experiments, human osteoblastic cells were cultured in the presence of A450 and A850, and assayed for viability and metabolic activity through Crystal Violet and MTT, respectively.

RESULTS

Our synthesis led to the formation of calcium phosphates in both samples, even though A850 presented a higher level of crystallinity and a more powdery aspects than A450. Both the samples enhanced the viability of cultured cells, inhibiting cell metabolic activity in the case of A850, which furthermore showed to be internalized by cells.

CONCLUSIONS

We developed two different kind of calcium phosphate-based powders and we tested their effect on human osteoblasts, underlying the possibility of use calcium phosphate-based coatings to enhance cell response on implantable materials.

A Newly Created Meso-, Micro-, and Nano-Scale Rough Titanium Surface Promotes Bone-Implant Integration

Titanium implants are the standard therapeutic option when restoring missing teeth and reconstructing fractured and/or diseased bone. However, in the 30 years since the advent of micro-rough surfaces, titanium’s ability to integrate with bone has not improved significantly. We developed a method to create a unique titanium surface with distinct roughness features at meso-, micro-, and nano-scales. We sought to determine the biological ability of the surface and optimize it for better osseointegration. Commercially pure titanium was acid-etched with sulfuric acid at different temperatures (120, 130, 140, and 150 °C). Although only the typical micro-scale compartmental structure was formed during acid-etching at 120 and 130 °C, meso-scale spikes (20–50 μm wide) and nano-scale polymorphic structures as well as micro-scale compartmental structures formed exclusively at 140 and 150 °C. The average surface roughness (Ra) of the three-scale rough surface was 6–12 times greater than that with micro-roughness only, and did not compromise the initial attachment and spreading of osteoblasts despite its considerably increased surface roughness. The new surface promoted osteoblast differentiation and in vivo osseointegration significantly; regression analysis between osteoconductivity and surface variables revealed these effects were highly correlated with the size and density of meso-scale spikes. The overall strength of osseointegration was the greatest when the acid-etching was performed at 140 °C. Thus, we demonstrated that our meso-, micro-, and nano-scale rough titanium surface generates substantially increased osteoconductive and osseointegrative ability over the well-established micro-rough titanium surface. This novel surface is expected to be utilized in dental and various types of orthopedic surgical implants, as well as titanium-based bone engineering scaffolds.

Disproportionate Effect of Sub-Micron Topography on Osteoconductive Capability of Titanium

Titanium micro-scale topography offers excellent osteoconductivity and bone-implant integration. However, the biological effects of sub-micron topography are unknown. We compared osteoblastic phenotypes and in vivo bone and implant integration abilities between titanium surfaces with micro- (1-5 µm) and sub-micro-scale (0.1-0.5 µm) compartmental structures and machined titanium. The calculated average roughness was 12.5 ± 0.65, 123 ± 6.15, and 24 ± 1.2 nm for machined, micro-rough, and sub-micro-rough surfaces, respectively. In culture studies using bone marrow-derived osteoblasts, the micro-rough surface showed the lowest proliferation and fewest cells attaching during the initial stage. Calcium deposition and expression of osteoblastic genes were highest on the sub-micro-rough surface. The bone-implant integration in the Sprague-Dawley male rat femur model was the strongest on the micro-rough surface. Thus, the biological effects of titanium surfaces are not necessarily proportional to the degree of roughness in osteoblastic cultures or in vivo. Sub-micro-rough titanium ameliorates the disadvantage of micro-rough titanium by restoring cell attachment and proliferation. However, bone integration and the ability to retain cells are compromised due to its lower interfacial mechanical locking. This is the first report on sub-micron topography on a titanium surface promoting osteoblast function with minimal osseointegration.

The Influence of Type 2 Diabetes Mellitus on the Osseointegration of Titanium Implants With Different Surface Modifications-A Histomorphometric Study in High-Fat Diet/Low-Dose Streptozotocin-Treated Rats

OBJECTIVES

Type 2 diabetes mellitus (T2DM) is a systemic disease that also compromises the bone healing capacity. In healthy individuals, surface modifications of dental implants are proven to increase bone response and implant success. The aim of this study was to clarify if the surface modifications also improve osseointegration in a setting with diabetes mellitus.

METHODS

T2DM was induced in 7 rats by a high-fat diet/low-dose streptozotocin injection. All animals received a hydroxyapatite (HA) implant, a sandblasted and acid-etched (SLA) implant, and a standard machined titanium implant for control in the tibia. After 4 weeks, thin-ground sections were produced, and the volume of new bone formation (nBV/TV) and bone-to-implant contact (nB.I/Im.I) were histomorphometrically analyzed.

RESULTS

Both surface modifications led to an increase of osseointegration compared with the machined surface implant in rats with T2DM. nBV/TV was highest in the SLA implants, whereas nB.I/Im.I was highest in the HA group. Regardless of the surface modification, a superordinate regional pattern of new bone formation over the length of the implant was observed.

CONCLUSIONS

Implants with HA coating and SLA surface modifications seem to have the potential to increase osseointegration also in T2DM rats when compared with a conventional machined surface.

A Clinical and Radiographic Evaluation of Resonance Frequency Analysis of Sand Blasted Acid Etched (SAE) and Chemical Modified Sae Dental Implants

Aims and Objective:

Chemically modified and sandblasted acid-etched (SAE) mechanism leads to wettability of surfaces of dental implants which helps in osseointegration. The present study was conducted to determine the implant stability quotient (ISQ) of SAE and SAE chemically modified dental implants.

Materials and Methods:

The present study was conducted on 210 patients with 120 males and 90 females. Dental implants (Adin) with SAE (Group A) and SAE chemically modified (Group B) were inserted in patients. RFA was done immediately after implant insertion and after 1 week, 2 weeks, 6 weeks, 10 weeks, and 14 weeks. Results were statistically evaluated using SPSS Statistics for Windows, Version 21.0, IBM Corp., Armonk, NY, USA.

Results:

Maximum patients were in the age group of 25–35 years (males – 65, females – 48), followed by 35–45 years (males – 40, females – 32) and 45–55 years (males – 15, females – 10). Maximum dental implants were given in the right side (88) in males than females (56). On the left side, maximum implants were given in females (62) than males (56). Maximum RFA value of 86.2 and minimum value of 44.6 were observed in SAE dental implants (A). The maximum mean RFA value in chemically modified implants SAE (B) was 89.4 and minimum was 32.5.

Conclusion:

It was observed that surface treatment of dental implants shows higher implant–bone osseointegration. There is fastest osseointegration in implants with hydrophilic surfaces than those with SAE surfaces. ISQ was higher than 75 in both groups, which indicate higher implant stability.

Bioactive Titanium Surfaces: Interactions of Eukaryotic and Prokaryotic Cells of Nano Devices Applied to Dental Practice

Background: In recent years, many advances have been made in the fields of bioengineering and biotechnology. Many methods have been proposed for the in vitro study of anatomical structures and alloplastic structures. Many steps forward have been made in the field of prosthetics and grafts and one of the most debated problems lies in the biomimetics and biocompatibility of the materials used. The contact surfaces between alloplastic material and fabric are under study, and this has meant that the surfaces were significantly improved. To ensure a good contact surface with the cells of our body and be able to respond to an attack by a biofilm or prevent the formation, this is the true gold standard. In the dental field, the study of the surfaces of contact with the bone tissue of the implants is the most debated, starting from the first concepts of osteointegration. Method: The study searched MEDLINE databases from January 2008 to November 2018. We considered all the studies that talk about nanosurface and the biological response of the latter, considering only avant-garde works in this field. Results: The ultimate aim of this study is to point out all the progress made in the field of bioengineering and biotechnologies about nanosurface. Surface studies allow you to have alloplastic materials that integrate better with our body and allow more predictable rehabilitations. Particularly in the field of dental implantology the study of surfaces has allowed us to make huge steps forward in times of rehabilitation. Overcoming this obstacle linked to the time of osseointegration, however, today the real problem seems to be linked to the “pathologies of these surfaces”, or the possible infiltration, and formation of a biofilm, difficult to eliminate, being the implant surface, inert. Conclusions: The results of the present investigation demonstrated how nanotechnologies contribute substantially to the development of new materials in the biomedical field, being able to perform a large number of tests on the surface to advance research. Thanks to 3D technology and to the reconstructions of both the anatomical structures and eventually the alloplastic structures used in rehabilitation it is possible to consider all the mechanical characteristics too. Recent published papers highlighted how the close interaction between cells and the biomaterial applied to the human body is the main objective in the final integration of the device placed to manage pathologies or for rehabilitation after a surgical tumor is removed.

Neuronal PAS domain 2 (Npas2) facilitated osseointegration of titanium implant with rough surface through a neuroskeletal mechanism

Titanium (Ti) biomaterials have been applied to a wide range of implantable medical devices. When placed in bone marrow, Ti-biomaterials integrate to the surrounding bone tissue by mechanisms that are not fully understood. We have previously identified an unexpected upregulation of circadian clock molecule neuronal PAS domain 2 (Npas2) in successfully integrated implant with a rough surface. This study aimed to elucidate the molecular mechanism of osseointegration through determining the role of Npas2. Human bone marrow stromal cells (BMSC) that were cultured on a Ti disc with SLA surface exhibited increased NPAS2 expression compared to BMSC cultured on a machined surface. A mouse model was developed in which miniature Ti implants were surgically placed into femur bone marrow. The implant push-out test and bone-to-implant contact measurements demonstrated the establishment of osseointegration in 3 weeks. By contrast, in Npas2 functional knockout (KO) mice, the implant push-out value measured for SLA surface Ti implant was significantly decreased. Npas2 KO mice demonstrated normal femur bone structure surrounding the Ti implant; however, the recovered implants revealed abnormal remnant mineralized tissue, which lacked dense collagen architecture typically found on recovered implants from wild type mice. To explore the mechanisms leading to the induced Npas2 expression, an unbiased chemical genetics analysis was conducted using mouse BMSC carrying an Npas2-reporter gene for high throughput screening of Library of Pharmacologically Active Compounds. Npas2 modulating compounds were found clustered in regulatory networks of the α2-adrenergic receptor and its downstream cAMP/CREB signaling pathway. Mouse primary BMSC exposed to SLA Ti disc significantly increased the expression of α2-adrenergic receptors, but the expression of β2-adrenergic receptor was unaffected. Our data provides the first evidence that peripheral clock gene component Npas2 plays a role in facilitating the enhanced osseointegration through neuroskeletal regulatory pathways induced by BMSC in contact with rough surface Ti implant.

Loading icariin on titanium surfaces by phase-transited lysozyme priming and layer-by-layer self-assembly of hyaluronic acid/chitosan to improve surface osteogenesis ability

Purpose

Icariin (ICA) is one of the main active constituents of Herba Epimedii for improving osteogenesis. It is necessary to create a simple and efficient method to load ICA onto the surface of titanium (Ti) implant. The purpose of this study was to establish a local ICA delivery system via a layer-by-layer (LbL) self-assembly system on phase-transited lysozyme (PTL)-primed Ti surface.

Materials and methods

A PTL nanofilm was first firmly coated on the pristine Ti. Then, the ICA-loaded hyaluronic acid/chitosan (HA/CS) multilayer was applied via the LbL system to form the HA/CS-ICA surface. This established HA/CS-ICA surface was characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and contact angle measurement. The ICA release pattern of the HA/CS-ICA surface was also examined. MC3T3-E1 osteoblast culture test and a rat model were used to evaluate the effects of the HA/CS-ICA surface in vitro and in vivo.

Results

SEM, XPS and contact angle measurement demonstrated successful fabrication of the HA/CS-ICA surface. The HA/CS-ICA surfaces with different ICA concentrations revealed a controlled release profile of ICA during a 2-week monitoring span. Osteoblasts grown on the coated substrates displayed higher adhesion, viability, proliferation and ALP activity than those on the polished Ti surface. Furthermore, in vivo histological evaluation revealed much obvious bone formation in the ICA-coated group by histological staining and double fluorescent labeling at 2 weeks after implantation.

Conclusion

The present study demonstrated that ICA-immobilized HA/CS multilayer on the PTL-primed Ti surface had a sustained release pattern of ICA which could promote the osteogenesis of osteoblasts in vitro and improve early osseointegration in vivo. This study provides a novel method for creating a sustained ICA delivery system to improve osteoblast response and osseointegration.

PLGA film/Titanium nanotubues as a sustained growth factor releasing system for dental implants

Ti-based implants sometimes fail to integrate with surrounding bone tissue due to insufficiency of new bone formation and surface bonding. To overcome this problem, this research focused on establishing a sustained bone growth factor delivery system by applying anodized TiO2 nanotube arrays and PLGA film on the titanium implant surface. TiO2 nanotube arrays were made by anodic oxidation method, and were then filled with rhBMP2 by vacuum freeze-drying. Next, PLGA was deposition on the surface of this material. The designed system was characterized, pharmacokinetic release rate of rhBMP2 was determined. Adhesion, proliferation, and differentiation activity of osteoblasts cultured on the new surfaces and traditional titanium surfaced were compared. SEM showed that a surface of TiO2 nanotube arrays were successfully generated. PLGA membranes of 50 nm, 250 nm, 800 nm thickness were successfully deposited on the surfaces of TiO2 nanotube layers by using 1%, 3%, 10% PLGA solutions. PLGA film of 250 nm thickness showed ideally controlled release of rhBMP2, lasting for 4 weeks. Furthermore, 250 nm thickness PLGA film improved osteoblast adhesion, proliferation, and levels of alkaline phosphatase. In conclusion, the PLGA film / TiO2 nanotube growth factor delivery system can effectively sustain the release of rhBMP-2, and promote proliferation and differentiation of MC3T3-E1 osteoblasts.

Coating of Sandblasted and Acid-Etched Dental Implants With Tantalum Using Vacuum Plasma Spraying

PURPOSE

The objective was to prepare tantalum (Ta)-coated sandblasted and acid-etched (SLA) dental implants using vacuum plasma spraying (VPS) and to analyze their morphologies.

MATERIALS AND METHODS

Twelve SLA implants were coated with Ta using VPS. The topographies of the coatings and Ta/SLA surface interfaces were examined using scanning electron microscopy. The thickness at 4 locations for 6 Ta-coated and 6 uncoated SLA implants and pore sizes of the neck, central, and root areas of Ta-coated implants were measured. SPSS v20.0 was used for statistical analysis.

RESULTS

The Ta coatings were rough and consisted of pitted structures with various pore sizes; no cracks were observed. The Ta/SLA surface interface was tightly bonded. The 95% confidence interval of the Ta coating thickness was (114.0759, 129.3574). The maximal pore diameter was concentrated at 200 to 400 nm.

CONCLUSION

SLA dental implants were successfully coated with Ta using VPS. The nanoporous structure of these implants may facilitate osseointegration compared with uncoated SLA implants.

Biomechanical, histological, and computed X-ray tomographic analyses of hydroxyapatite coated PEEK implants in an extended healing model in rabbit

A nanosized hydroxyapatite (HA) modification on polyetheretherketone (PEEK) using a novel spin coating technique was investigated in a rabbit model. Spin coating technique creates a 20-40 nm thick layer of nanosized HA particles with similar shape, size, and crystallinity as human bone. Some implants were designed with a perforating hole in the apical region to mimic a fusion chamber of a spinal implant. The coating nano-structures were assessed using a scanning electron microscope. The in vivo response to HA-PEEK was compared to untreated PEEK with respect to removal torque, histomorphometry, and computed microtomography. The HA-coated and pure PEEK implants were inserted in the tibia and femur bone according to simple randomization. The rabbits were sacrificed 20 weeks after implantation. Removal torque analysis showed significantly higher values for HA-PEEK. Qualitative histological evaluation revealed an intimate contact between PEEK and the bone at the threads and perforated hole. Histomorphometric assessment showed higher bone-implant and bone area values for HA-PEEK but without statistical significance. The effect of the HA coating showed most prominent effect in the removal torque which may be correlated to an alteration in the bone quality around the HA-PEEK implants. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1440-1447, 2018.

Experimental Analysis of Temperature Differences During Implant Site Preparation: Continuous Drilling Technique Versus Intermittent Drilling Technique

Implant site preparation through drilling procedures may cause bone thermonecrosis. The aim of this in vitro study was to evaluate, using a thermal probe, overheating at implant sites during osteotomies through 2 different drilling methods (continuous drilling technique versus intermittent drilling technique) using irrigation at different temperatures. Five implant sites 13 mm in length were performed on 16 blocks (fresh bovine ribs), for a total of 80 implant sites. The PT-100 thermal probe was positioned 5 mm from each site. Two physiological refrigerant solutions were used: one at 23.7°C and one at 6.0°C. Four experimental groups were considered: group A (continuous drilling with physiological solution at 23.7°C), group B (intermittent drilling with physiological solution at 23.7°C), group C (continuous drilling with physiological solution at 6.0°C), and group D (intermittent drilling with physiological solution at 6.0°C). The Wilcoxon rank-sum test (2-tailed) was used to compare groups. While there was no difference between group A and group B (W = 86; P = .45), statistically significant differences were observed between experimental groups A and C (W = 0; P =.0001), B and D (W = 45; P =.0005), and C and D (W = 41; P = .003). Implant site preparation did not affect the overheating of the bone. Statistically significant differences were found with the refrigerant solutions. Using both irrigating solutions, bone temperature did not exceed 47°C.

Effect of low-intensity pulsed ultrasound on the biological behaviors of bone marrow mesenchymal stem cells on titanium with different surface topographies

The use of low-intensity pulsed ultrasound (LIPUS) is a promising approach to promote osteogenesis. However, few studies have reported the influence of this technique on the osseointegration of endosseous implants, especially regarding different implant topographies. We focused on how the initial interaction between cells and the titanium surface is enhanced by LIPUS and the potential regulatory mechanisms. The bone marrow mesenchymal stem cells (BMSCs) of rats were cultured on two types of titanium surfaces (polished surface, Flat and large grain blast acid etched, SLA) under LIPUS stimulation or control conditions. The cell proliferation on the implant surfaces was significantly promoted by LIPUS, which stimulated the increase in the number of microfilaments, pseudopodia formed and extracellular matrix mineralization nodules compared with those in the control group. The expression of osteogenesis-related genes, including OPN, OCN, BMP-2, ALP, Runx2 and Col-1, were up-regulated on all the surfaces by LIPUS stimulation. Our findings suggest that LIPUS enhances osteoblast differentiation from BMSCs on titanium surfaces. The use of LIPUS might be a potential adjuvant treatment to improve the osseointegration process.

Methods to Improve Osseointegration of Dental Implants in Low Quality (Type-IV) Bone: An Overview

Nowadays, dental implants have become more common treatment for replacing missing teeth and aim to improve chewing efficiency, physical health, and esthetics. The favorable clinical performance of dental implants has been attributed to their firm osseointegration, as introduced by Brånemark in 1965. Although the survival rate of dental implants over a 10-year observation has been reported to be higher than 90% in totally edentulous jaws, the clinical outcome of implant treatment is challenged in compromised (bone) conditions, as are frequently present in elderly people. The biomechanical characteristics of bone in aged patients do not offer proper stability to implants, being similar to type-IV bone (Lekholm &amp; Zarb classification), in which a decreased clinical fixation of implants has been clearly demonstrated. However, the search for improved osseointegration has continued forward for the new evolution of modern dental implants. This represents a continuum of developments spanning more than 20 years of research on implant related-factors including surgical techniques, implant design, and surface properties. The methods to enhance osseointegration of dental implants in low quality (type-IV) bone are described in a general manner in this review.