Association between craniofacial morphological patterns and tooth agenesis-related genes

Bimaxillary fixed implant-supported zirconium oxide prosthesis therapy of an adolescent patient with non-syndromic oligodontia and two WNT10 variants: a case report

Introduction and importance

Oligodontia is a rare genetic condition characterized by more than six congenitally missing teeth, either as an isolated non-syndromic condition or in association with other genetic syndromes. The impact of WNT10A variants on dental development increases with the presence of the c.321C>A variant and the number of missing teeth.

Case presentation

A 21-year-old man with non-syndromic oligodontia was diagnosed at 15 years of age with misaligned teeth, speech problems, and the absence of 24 permanent teeth. Interdisciplinary collaboration between specialists was initiated to enable comprehensive treatment. DNA analysis confirmed that the patient was a carrier of the known pathogenic WNT10A variant c321C>A and WNT10A variant c.113G>T of unknown clinical significance.

Clinical discussion

Dental implants are a common treatment; however, bone development challenges in adolescent patients with non-syndromic oligodontia necessitate careful planning to ensure implant success. Many WNT variants play crucial roles in tooth development and are directly involved in non-syndromic oligodontia, especially the WNT10 variant c.321C>A.

Conclusion

A full-arch implant-supported monolithic zirconia screw-retained fixed prosthesis is a viable treatment option for young adults with non-syndromic oligodontia. Further studies are needed to clarify the possible amplifying effect of the WNT10A variants c321C>A and c.113G>T on the pathogenic phenotype of non-syndromic oligodontia.

Towards Genetic Dissection of Skeletal Class III Malocclusion: A Review of Genetic Variations Underlying the Phenotype in Humans and Future Directions

INTRODUCTION

Skeletal abnormalities and malocclusions have varied features that impact populations globally, impairing aesthetics and lowering life quality. The prevalence of the Skeletal Class III disease is the lowest among all angle malocclusions, with varied prevalence across nations. Environmental, genetic, and societal factors play a role in its numerous etiologies. In this study, we conducted a thorough search across the published data relating to quantitative trait loci (QTL) and the genes associated with Class III progression in humans, discussed these findings and their limitations, and proposed future directions and strategies for studying this phenotype.

METHODS

An inclusive search of published papers in the PubMed and Google Scholar search engines using the following terms: 1. Human skeletal Class III; 2. Genetics of Human skeletal Class III; 3. QTL mapping and gene associated with human skeletal Class III; 4. enriched skeletal Class-III-malocclusion-associated pathways.

RESULTS

Our search has found 53 genes linked with skeletal Class III malocclusion reported in humans, genes associated with epigenetics and phenomena, and the top 20 enriched pathways associated with skeletal Class III malocclusion.

CONCLUSIONS

The human investigations yielded some contentious conclusions. We conducted a genome-wide association study (GWAS), an epigenetics-wide association study (EWAS), RNA-seq analysis, integrating GWAS and expression quantitative trait loci (eQTL), micro- and small-RNA, and long non-coding RNA analysis in tissues connected to skeletal Class III malocclusion phenotype in tissues connected with the skeletal phenotype. Finally, we invite regional, national, and international orthodontists and surgeons to join this effort by contributing human samples with skeletal Class III malocclusion following the accepted Helsinki ethical protocol to challenge these phenomena jointly.

Tooth number abnormality: from bench to bedside

Tooth number abnormality is one of the most common dental developmental diseases, which includes both tooth agenesis and supernumerary teeth. Tooth development is regulated by numerous developmental signals, such as the well-known Wnt, BMP, FGF, Shh and Eda pathways, which mediate the ongoing complex interactions between epithelium and mesenchyme. Abnormal expression of these crutial signalling during this process may eventually lead to the development of anomalies in tooth number; however, the underlying mechanisms remain elusive. In this review, we summarized the major process of tooth development, the latest progress of mechanism studies and newly reported clinical investigations of tooth number abnormality. In addition, potential treatment approaches for tooth number abnormality based on developmental biology are also discussed. This review not only provides a reference for the diagnosis and treatment of tooth number abnormality in clinical practice but also facilitates the translation of basic research to the clinical application.

Relationship between Craniovertebral Abnormalities and Maxillary Lateral Incisors Agenesis: A Case-Control Study

Objectives

This study aimed to investigate whether the sella turcica bridging (STB) and ponticulus posticous (PP) are associated with the congenital missing maxillary lateral incisor (CMMLI), based on lateral cephalograms of patients who needed orthodontic treatment.

Materials and Methods

This case-control study examined 160 panoramic images and lateral cephalograms of 2000 patients seeking orthodontic treatment. The case group included 80 patients with CMMLI (40 with unilateral and 40 with bilateral CMMLI) and the control group included 80 patients without CMMLI. Panoramic images were used to diagnose CMMLI and lateral cephalograms showed STB and PP extension. The researchers used statistical analyses to examine the relationship among STB, PP, and CMMLI (P < 0.05).

Results

The prevalence of STB type I, II, and III was 47.5%, 35%, and 17.5% in the case group and 72.5%, 22.5%, and 5% in the control group, respectively, determining a positive relationship between CMMLI and STB and a significant relationship between bilateral CMMLI and STB (P < 0.05 for both). The prevalence of normal, incomplete, and complete PP extension was 80%, 5%, and 15% in the case group and 82.5%, 5%, and 12.5% in the control group, respectively. There was no significant relationship between CMMLI and PP extension (P > 0.05) and between the STB and the PP extension (P > 0.05).

Conclusion

CMMLI was significantly related to STB but not to PP extension. Investigating the relationship between unilateral/bilateral CMMLI, STB, and PP has shown only a significant relationship between bilateral CMMLI and STB. There was no significant relationship between STB and PP extension.

The association of polymorphisms in BMP2/MYO1H and skeletal Class II div.1 maxillary and mandibular dimensions. A preliminary ‘report

Introduction

The genetic impact directly or indirectly predefines maxillofacial dimensions, potentially leading to an inappropriate relationship of the jaws and subsequently skeletal malocclusion. Previous studies focused mainly on genetic polymorphisms and class III malocclusion. This study was set out to investigate the association between genetic polymorphisms in two genes BMP2 (rs235768) and MYO1H (rs11066446) with Class II division 1 malocclusion, skeletal variation in vertical plane, and maxillary and mandibular jaws length.

Subjects and methods

Sixty patients classified as Skeletal Class I (n = 30) and Class II division 1 (n = 30) were recruited. DNA was extracted from saliva and analyzed by Sanger sequencing. Lateral cephalometric radiographs were measured for the anterio-posterior relationship of maxillary and mandibular arch using digital tracing. Hardy-Weinberg equilibrium analysis of genotype frequencies was performed using Chi-square test to compare genotype distribution among groups and multiple logistic regression analysis adjusted by gender was also performed.

Results

The rs235768 polymorphism in BMP2 was associated with hypodivergent face, increased maxillary length, and decreased mandibular length. Meanwhile, the rs11066446 polymorphism in MYO1H was associated with decreased mandibular length. New polymorphism was identified in MYO1H (rs10850090) in association with decreased mandibular length.

Conclusion

A potential association between polymorpisms in BMP2 rs235768 and MOY1H rs11066446 and rs10850090 and Class II division 1 skeletal malocclusion related phenotypes exists, however, the degree of it has to be further investigated and yet to be discovered.

Transforming Growth Factor Beta Receptor 2 (TGFBR2) Promoter Region Polymorphisms May Be Involved in Mandibular Retrognathism

Skeletal malocclusions are common phenotypes in humans and have a strong influence on genetic factors. Transforming growth factor beta (TGFβ) controls numerous functions of the human body, including cell proliferation, differentiation, and migration. Thus, this study is aimed at evaluating whether genetic polymorphisms in TGFB1 and its receptor TGFBR2 are associated with mandibular retrognathism in German children and adolescents. Children and teenagers older than 8 years in the mixed or permanent dentition were included in this study. Patients with syndromes and facial trauma and patients with congenital alterations were excluded. Digital cephalometric tracings were performed using the anatomical landmarks point A, point B, sella (S), and nasion (N). Patients that have a retrognathic mandible (SNB < 78°) were selected as case group, and the patients with an orthognathic mandible (SNB = 78°– 82°) were selected as the control group. Genomic deoxyribonucleic acid (DNA) from saliva was used to evaluate four genetic polymorphisms in TGFB1 (rs1800469 and rs4803455) and TGBR2 (rs3087465 and rs764522) using real-time PCR. Chi-square or Fisher exact tests were used to compare gender, genotype, and allele distribution among groups. Genotype distribution was calculated in an additive and recessive model. Haplotype analysis was also performed. The established alpha of this study was 5%. A total of 146 patients (age ranging from 8 to 18 years) were included in this epidemiological genetic study. The genetic polymorphism rs3087465 in TGFBR2 was associated with mandibular retrognathism. Carrying the AA genotype in the rs3087465 polymorphism decreased the chance of having mandibular retrognathism (odds ratio = 0.25, confidence interval 95% = 0.06 to 0.94, p = 0.045). None of the haplotypes was associated with mandibular retrognathism (p > 0.05). In conclusion, we found that the genetic polymorphism rs3087465 in the promoter region of the TGFBR2 was associated with mandibular retrognathism in Germans.

Number of Teeth Is Related to Craniofacial Morphology in Humans

Simple Summary

In modern humans, congenital absence of one or more permanent teeth has a prevalence of 22.6% when considering the third molars and of 6.4% when not. Its high prevalence, in conjunction with evolutionary findings pinpointing to a steady reduction in teeth number, raises the question whether the congenital absence of teeth in modern humans is an evolutionary trend rather than an anomaly. Previous studies have shown that modern humans with less teeth also have smaller faces; however, the association between teeth number and craniofacial morphology remains unclear. Here, we show that less teeth are associated with a flatter profile and a decreased facial height. These findings support the claim of a broader relationship between number of teeth and overall craniofacial development and have evolutionary implications, since face reduction comprises also an evolutionary trend in humans.

Abstract

One of the most common dental anomalies in humans is the congenital absence of teeth, referred to as tooth agenesis. The association of tooth agenesis to craniofacial morphology has been previously investigated but remains unclear. We investigated this association by applying geometric morphometric methods in a large sample of modern humans. In line with previous studies, we report here that a reduced teeth number is linked to a less convex profile, as well as to a shorter face. The effects were similar for males and females; they increased as the severity of the tooth agenesis increased and remained unaltered by the inclusion of third molars and of allometry in the analysis. Furthermore, in cases with tooth agenesis only in the maxilla, there was no detectable effect in mandibular shape, whereas maxillary shape was affected independently of the location of missing teeth. The robustness of the present sample along with the shape analysis and the statistical approach applied, allowed for thorough testing of various contributing factors regarding the presence but also the magnitude of effects. The present findings suggest a relationship between number of teeth and overall craniofacial development and have evolutionary implications.

Genes and Pathways Associated with Skeletal Sagittal Malocclusions: A Systematic Review

Skeletal class II and III malocclusions are craniofacial disorders that negatively impact people’s quality of life worldwide. Unfortunately, the growth patterns of skeletal malocclusions and their clinical correction prognoses are difficult to predict largely due to lack of knowledge of their precise etiology. Inspired by the strong inheritance pattern of a specific type of skeletal malocclusion, previous genome-wide association studies (GWAS) were reanalyzed, resulting in the identification of 19 skeletal class II malocclusion-associated and 53 skeletal class III malocclusion-associated genes. Functional enrichment of these genes created a signal pathway atlas in which most of the genes were associated with bone and cartilage growth and development, as expected, while some were characterized by functions related to skeletal muscle maturation and construction. Interestingly, several genes and enriched pathways are involved in both skeletal class II and III malocclusions, indicating the key regulatory effects of these genes and pathways in craniofacial development. There is no doubt that further investigation is necessary to validate these recognized genes’ and pathways’ specific function(s) related to maxillary and mandibular development. In summary, this systematic review provides initial insight on developing novel gene-based treatment strategies for skeletal malocclusions and paves the path for precision medicine where dental care providers can make an accurate prediction of the craniofacial growth of an individual patient based on his/her genetic profile.

Missing and unerupted teeth in osteogenesis imperfecta

INTRODUCTION

Osteogenesis imperfecta (OI) is a genetic disorder characterized by bone fragility and craniofacial and dental abnormalities such as congenitally missing teeth and teeth that failed to erupt which are believed to be doubled in OI patients than normal populations and were associated with low oral health quality of life. However, the etiology of these abnormalities remains unclear. To understand the factors influencing missing and unerupted teeth, we investigated their prevalence in a cohort of OI patients as a function of the clinical phenotype (OI type), the genetic variant type, the tooth type and the onset of bisphosphonate treatment.

METHOD

A total of 144 OI patients were recruited from The Shriners Hospital, Montreal, Canada, between 2016 and 2017. Patients were evaluated using intraoral photographs and panoramic radiographs. Missing teeth were evaluated in all patients, and unerupted teeth were assessed only in patients ≥15 years old (n = 82).

RESULTS

On average, each OI patient had 2.4 missing teeth and 0.8 unerupted teeth, and the most common missing and unerupted teeth were the premolars and the upper second molars, respectively. These phenomena were more prominent in OI type III and IV than in OI type I, and were not sex or age-related. Missing teeth were significantly more common in patients with C-propeptide variants than all other variants (p-value <0.05). Unerupted teeth were significantly more common in patients with α1 and α2 glycine variants or substitutions than in those with haploinsufficiency variants. Early-onset of bisphosphonate treatment would significantly increase the risk of unerupted teeth in patients with OI types III and IV (OR = 1.68, 95% CI (1.15-1.53)).

CONCLUSION

The prevalence of missing and unerupted teeth at the tooth type level in OI patients varies according to the nature of the collagen variants and the OI type. These findings highlight the role of collagen in tooth development and eruption.

Genetic factors contributing to skeletal class III malocclusion: a systematic review and meta-analysis

OBJECTIVES

The present systematic review aims to report and critically assess the findings of the available scientific evidence from genetic association studies examining the genetic variants underlying skeletal class III malocclusion and its sub-phenotypes.

MATERIAL AND METHODS

A pre-piloted protocol was registered and followed. The PubMed, Scopus, WOS, Cochrane Library, Gray Open literature, and CADTH databases were explored for genetic association studies following PICOS-based selection criteria. The research was reported in accordance with PRISMA statement and HuGE guidelines. The Q-genie tool was applied to assess the quality of genetic studies. Meta-analysis of genetic association studies was done by means of Meta-Genyo tool.

RESULTS

A total of 8258 articles were retrieved, of which 22 were selected for in-depth analysis. Most of the studies did not differentiate between sub-phenotypes, and the cohorts were heterogeneous regarding ethnicity. Four to five principal components of class III malocclusion explained the phenotypic variation, and gene variants at MYO1H(rs10850110), BMP3(rs1390319), GHR (rs2973015,rs6184, rs2973015), FGF7(rs372127537), FGF10(rs593307), and SNAI3(rs4287555) (p < .05) explained most of the variation across the studies, associated to vertical, horizontal, or combined skeletal discrepancies. Meta-analysis results identified a statistically significant association between risk of class III malocclusion of A allele of the FBN3 rs7351083 [OR 2.13; 95% CI 1.1-4.1; p 0.02; recessive model].

CONCLUSION

Skeletal class III is a polygenic trait substantially modulated by ethnicity. A multicentric approach should be considered in future studies to increase sample sizes, applying multivariate analysis such as PCA and cluster analysis to characterize existing sub-phenotypes warranting a deeper analysis of genetic variants contributing to skeletal class III craniofacial disharmony.

CLINICAL RELEVANCE

Grasping the underlying mechanisms of this pathology is critical for a fuller understanding of its etiology, allowing generation of preventive strategies, new individualized therapeutic approaches and more accurate treatment planification strategies.

IRF6, MSX1, TGFA, dental anomalies, and skeletal malocclusion

OBJECTIVE

Verify the presence of association between four variables-transforming growth factor α (TGFA; C/T rs1523305), interferon regulatory factor 6 (IRF6; A/C rs2013162), muscle segment homeobox 1 (MSX1; A/G rs12532), and dental anomalies-with skeletal malocclusion by comparing these four variables with Angle Classes I, II, and III, and normal, hyperdivergent, and hypodivergent growth patterns.

METHODS

A total of 505 orthodontic records of patients older than 8 years were evaluated. The sample consisted of 285 (56.4 per cent) females, 220 (43.6 per cent) males, 304 (60.2 per cent) Whites (the rest were mixed Blacks with Whites), with a mean age of 20.28 (±10.35) years (ranging from 8 to 25 years). Eight cephalometric points, which served as the anatomical framework for obtaining angles and cephalometric measurements, were used for skeletal characterization using the Dolphin Software. Samples of saliva were collected and the DNA was extracted, diluted and quantified. Markers in TGFA, IRF6, and MSX1 were used and genotypes were obtained using TaqMan chemistry. Odds ratio (OR) and 95 per cent confidence interval (CI) calculations, chi-square, Fisher's Exact, Mann-Whitney, and correlation coefficient tests (significance level: 95 per cent) were performed. Bonferroni correction was applied and an alpha of 0.0006 was considered statistically significant.

RESULTS

There was no statistically significant associations between markers in TGFA or IRF6 with skeletal malocclusions. Tooth agenesis was associated with facial convexity (P < 0.001). MSX1 was associated with Class II skeletal malocclusion (P = 0.0001, OR = 0.6, CI = 0.46-0.78).

CONCLUSION

Individuals with tooth agenesis were more likely to have a convex face. MSX1 was associated with Class II skeletal malocclusion.

Potential interactions among single nucleotide polymorphisms in bone- and cartilage-related genes in skeletal malocclusions

OBJECTIVE

To investigate SNPs in bone- and cartilage-related genes and their interaction in the aetiology of sagittal and vertical skeletal malocclusions.

SETTINGS AND SAMPLE POPULATION

This study included 143 patients and classified as follows: skeletal class I (n = 77), class II (n = 47) and class III (n = 19); maxillary retrusion (n = 39), protrusion (n = 52) and well-positioned maxilla (n = 52); mandibular retrognathism (n = 50), prognathism (n = 50) and well-positioned mandible (n = 43); normofacial (n = 72), dolichofacial (n = 55) and brachyfacial (n = 16).

MATERIALS AND METHODS

Steiner's ANB, SNA, SNB angles and Ricketts' NBa-PtGn angle were measured to determine the skeletal malocclusion and the vertical pattern. Nine SNPs in BMP2, BMP4, SMAD6, RUNX2, WNT3A and WNT11 were genotyped. Chi-squared test was used to compare genotypes among the groups. Multifactor dimensionality reduction (MDR) and binary logistic regression analysis, both using gender and age as co-variables, were also used. We performed Bonferroni correction for multiple testing.

RESULTS

Significant associations at P < .05 were observed for SNPs rs1005464 (P = .042) and rs235768 (P = .021) in BMP2 with mandibular retrognathism and for rs59983488 (RUNX2) with maxillary protrusion (P = .04) as well as for rs708111 (WNT3A) with skeletal class III (P = .02; dominant model), rs1533767 (WNT11) with a brachyfacial skeletal pattern (P = .01, OR = 0.10; dominant model) and for rs3934908 (SMAD6) with prognathism (P = .02; recessive model). After the Bonferroni correction, none of the SNPs remained associated. The MDR predicted some interaction for skeletal class II, dolichofacial and brachyfacial phenotypes.

CONCLUSION

Our results suggest that SNPs in BMP2, BMP4, SMAD6, RUNX2, WNT3A and WNT11 could be involved in the aetiology of sagittal and vertical malocclusions.