Copper oxide-graphene oxide nanocomposite: efficient catalyst for hydrogenation of nitroaromatics in water

Graphene-Based Catalysts: Emerging Applications and Potential Impact

Carbon nanofillers in general and graphene in particular are considered as promising potential candidates in catalysis due to their two-dimensional (2D) nature, zero bandwidth, single atom thickness with a promising high surface area: volume ratio. Additionally, graphene oxide via result of tunable electrical properties has also been developed as a catalytic support for metal and metal oxide nanofillers. Moreover, the possession of higher chemical stability followed by ultrahigh thermal conductivity plays a prominent role in promoting higher reinforcement of catalytically active sites. In this review we have started with an overview of carbon nanofillers as catalyst support, their main characteristics and applications for their use in heterogeneous catalysis. The review article also critically focusses on the catalytic properties originating from both functional groups as well as doping. An in-depth literature on the various reaction catalysed by metal oxide based nanoparticles supported on GO/rGO has also been incorporated with a special focus on the overall catalytic efficiency with respect to graphene contribution. The future research prospective in the aforementioned field has also been discussed.

A Novel Concept of Nano-Enhanced Phase Change Material

In the actual context of growing concerns over sustainability and energy efficiency, Phase Change Materials (PCMs) have gained attention as promising solutions for enhancing energy storage and release efficiency. On another hand, materials based on graphene oxide (GO) have proven antibacterial activity, biocompatibility, efficiency in microbial growth inhibition, and pollutant removal. Integrating nanoparticles into PCMs and creating Nano-Enhanced Phase Change Materials (NEPCMs) have opened new horizons for optimizing the performance of these systems and sustainable development. The key objective of this work is to gain insight into NECPMs, which are used in solar wall systems to enhance solar energy storage. Paraffin RT31 was mixed with Cu nanoparticles, graphene oxide (GO), and Cu-decorated GO (Cu@GO) at loading ratios ranging from 1% to 4% (w/w nanoparticles with respect to RT31). The compositions were characterized through Differential Scanning Calorimetry (DSC) and rheology tests. The decoration of the carbon-based nanoparticles was performed using the ultrasonication procedure, and the decoration efficiency was confirmed through X-ray Photoelectron Spectroscopy (XPS). The rheologic measurements were performed to correlate the flow behavior of the NEPCM with their composition at various temperatures. The study methodically investigated these composites' latent heat values, phase change peak temperatures, and solidification phase change temperatures. Compared to pure paraffin, the solidification of the formulations obtained using Cu@GO exhibits the largest increase in latent heat, with a 12.07% growth at a concentration of 2%. Additionally, at a 4% concentration of NEPCM, the largest increase in thermal conductivity was attained, namely 12.5%.

A Pd-containing ionic liquid modified magnetic graphene oxide nanocomposite (Fe3O4/GO-IL-Pd) as a powerful catalyst for the reduction of nitrobenzenes

A novel palladium-containing ionic liquid-modified magnetic graphene oxide nanocomposite (Fe3O4/GO-IL-Pd) is synthesized and its catalytic performance is studied in the reduction of nitrobenzenes. The Fe3O4/GO-IL-Pd nanocomposite was characterized by using FT-IR, PXRD, SEM, EDS, VSM, and TG analyses. These analyses showed good magnetic properties and high stability of the designed composite. Different derivatives of nitrobenzenes were applied as substrates, giving corresponding anilines in high to excellent yields (89-96%) at short reaction times (10-15 minutes). Also, the stability, reproducibility, and reusability of the Fe3O4/GO-IL-Pd nanocomposite were investigated under applied conditions. A leaching experiment was also performed to study the nature of the Fe3O4/GO-IL-Pd catalyst under the conditions used.

Elucidating the structural, catalytic, and antibacterial traits of Ficus carica and Azadirachta indica leaf extract-mediated synthesis of the Ag/CuO/rGO nanocomposite

The present exploration demonstrates the efficient, sustainable, cost-effective, and environment-friendly green approach for the synthesis of silver (Ag)-doped copper oxide (CuO) embedded with reduced graphene oxide (rGO) nanocomposite using the green one-pot method and the green deposition method. Leaf extracts of Ficus carica and Azadirachta indica were used for both methods as reducing and capping agents. The effect of methodology and plant extract was analyzed through different characterization techniques such as UV-visible spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), x-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM). The lowest band gap of 3.0 eV was observed for the Ag/CuO/rGO prepared by the green one-pot method using F. carica. The reduction of graphene oxide (GO) and the formation of metal oxide was confirmed through functional group detection using FT-IR. Calculation of thermodynamic parameters showed that all reactions involved were nonspontaneous and endothermic which shows the stability of nanocomposites. XRD studies revealed the crystallinity, phase purity and small average crystallite size of 32.67 nm. SEM images disclosed that the morphology of the nanocomposites was spherical with agglomeration and rough texture. The particle size of the nanocomposites calculated through HRTEM was found in agreement with the XRD results. The numerous properties of the synthesized nanocomposites enhanced their potential against the degradation of methylene blue, rhodamine B, and ciprofloxacin. The highest percentage degradation of Ag/CuO/rGO was found to be 97%, synthesized using the green one-pot method with F. carica against ciprofloxacin, which might be due to the lowest band gap, delayed electron-hole pair recombination, and large surface area available. The nanocomposites were also tested against the Gram-positive and Gram-negative bacteria. RESEARCH HIGHLIGHTS: Facile synthesis of Ag/CuO/rGO nanocomposite using a green one-pot method and the green deposition method. The lowest band gap of 3.0 eV was observed for nanocomposite prepared by a green one-pot method using Ficus carica. Least average crystallite size of 32.67 nm was found for nanocomposite prepared by a green one-pot method using F. carica. Highest antibacterial and catalytic activity (97%) was obtained against ciprofloxacin with nanocomposite prepared through green one-pot method using F. carica. A mechanism of green synthesis is proposed.

Comparative study of NiO/CuO/Ag doped graphene based materials for reduction of nitroaromatic compounds and degradation of dye with statistical study

In the present work, the Nickel oxide (rGO-NiO), Silver (rGO-Ag), Copper oxide (rGO-CuO) doped Graphene Oxide are reported for catalytic reactions. A comparative study for catalytic activities of these materials are performed with nitroaromatic compound 4-nitroaniline and the results are statistically studied by using univariate analysis of variance and Post Hoc Test through Statistical Package for Social Sciences and it is observed that CuO doped Graphene material is showing better catalytic activity in minimum time. So, further research has been focused on the catalytic acitivity of rGO-CuO only and it is found that it is efficient in reducing other nitro compounds also such as Picric acid and Nitrobenzene. Dye degradation of Methylene blue is also performed using CuO decorated Graphene material and significant changes were observed using UV spectroscopy. The characterization of rGO-CuO is done with Fourier-transform Infrared Spectroscopy, Powder X-ray Diffraction, Thermogravimetric Analysis, Scanning Electron Microscope and Transmission Electron Microscopy.

Green Synthesis of CuO Nanoparticles Using Agaricus bisporus Extract as a Highly Efficient Catalyst for the Suzuki Cross-Coupling Reaction

Copper oxide nanoparticles (CuONPs) were synthesized using a rapid, eco-friendly, cost-effective, efficient, and biological method employing aqueous Agaricus bisporus extract as a capping and reducing agent. The formation of CuONPs was checked by UV-vis spectroscopy and was characterized by X-ray diffraction analysis (XRD), dynamic light scattering spectroscopy (DLS), transmission electron microscopy (TEM), and surface area and porosimetry analyzer. The characterization results showed that the synthesized nanoparticles had a spherical-like appearance and a crystal structure with 40-100 nm particle size. The green synthesized CuONPs were found to be an excellent and sustainable heterogeneous catalyst (TOF up to 29700 h-1 ) for the Suzuki C-C coupling of aryl halides with phenylboronic acid in a very short reaction time (10 minutes). Moreover, the easily recovered catalyst can be reused five times with just a negligible reduction in catalytic behavior.

Foldable RF Energy Harvesting System Based on Vertically Layered Metal Electrodes within a Single Sheet of Paper

Radio frequency energy harvesting (RFEH) systems have emerged as a critical component for powering devices and replacing traditional batteries, with paper being one of the most promising substrates for use in flexible RFEH systems. However, previous paper-based electronics with optimized porosity, surface roughness, and hygroscopicity still face limitations in terms of the development of integrated foldable RFEH systems within a single sheet of paper. In the present study, a novel wax-printing control and water-based solution process are used to realize an integrated foldable RFEH system within a single sheet of paper. The proposed paper-based device includes vertically layered foldable metal electrodes, a via-hole, and stable conductive patterns with a sheet resistance of less than 1 Ω sq^-1 . The proposed RFEH system exhibits an RF/DC conversion efficiency of 60% and an operating voltage of 2.1 V in 100 s at a distance of 50 mm and a transmitted power of 50 mW. The integrated RFEH system also demonstrates stable foldability, with RFEH performance maintained up to a folding angle of 150°. The single-sheet paper-based RFEH system thus has the potential for use in practical applications associated with the remote powering of wearable and Internet-of-Things devices and in paper electronics.

Magnetic boron nitride adorned with Pd nanoparticles: an efficient catalyst for the reduction of nitroarenes in aqueous media

Hexagonal boron nitride (h-BN) is an excellent support material for nanocatalysts due to its two-dimensional (2D) architectural morphology and physicochemical stability. In this study, a chemically stable, recoverable, eco-friendly, and magnetic h-BN/Pd/Fe₂O₃ catalyst was prepared by a one-step calcination process, in which Pd and Fe₂O₃ nanoparticles (NPs) were uniformly decorated on the surface of h-BN via a typical adsorption-reduction procedure. In detail, nanosized magnetic (Pd/Fe₂O₃) NPs were derived from a Prussian blue analogue prototype, a well-known porous metal-organic framework, and then further surface-engineered to produce magnetic BN nanoplate-supported Pd nanocatalysts. The structural and morphological features of h-BN/Pd/Fe₂O₃ were investigated by spectroscopic and microscopic characterization techniques. Moreover, the h-BN nanosheets endow it with stability and appropriate chemical anchoring sites which solve the problems of inefficient reaction rate and high consumption caused by the inevitable agglomeration of precious metal NPs. Under mild reaction conditions, the developed nanostructured h-BN/Pd/Fe₂O₃ as the catalyst shows high yield and efficient reusability in reducing nitroarenes into the corresponding anilines using sodium borohydride (NaBH₄) as a reductant.

Microwave-Induced CuO Nanorods: A Comparative Approach between Curcumin, Quercetin, and Rutin to Study Their Antioxidant, Antimicrobial, and Anticancer Effects against Normal Skin Cells and Human Breast Cancer Cell Lines MCF-7 and T-47D

Herein, we explore the biological properties of curcumin, quercetin, and rutin by loading them onto porous CuO nanorods (NRs). The CuO NRs were synthesized using the microwave irradiation method through a chemical reaction between CuSO₄·5H₂O and NaOH in the presence of the anionic stabilizer sodium dodecyl sulfate. The shape and surface morphology of CuO NRs were examined with two microscopic techniques: high-resolution transmission electron microscopy (HR-TEM) and field emission scanning electron microscopy (FESEM). Their average diameter was measured by TEM to be 15 ± 2 nm. The porosity and interfacial area of the fabricated material were determined by Brunauer-Emmett-Teller analysis. After successful synthesis, CuO NRs were loaded with polyphenolic curcumin, quercetin, and rutin, with the loading efficiency of 57.8, 62.2, and 81.2%, respectively, which was confirmed by UV-visible and infra-red spectroscopy and finally with a thermal gravimetric technique. Their radical scavenging activity was measured with the 2,2-diphenyl-1-picrylhydrazyl radical and compared with the control (ascorbic acid). Further, good bactericidal effects were observed against both Gram-positive bacterial strains, including Staphylococcus aureus and Bacillus subtilis, and Gram-negative bacterial strains, including Salmonella typhi, Pseudomonas aeruginosa, Escherichia coli, and Klebsiella pneumoniae. Excellent anticancer activity was observed against normal skin cells and breast cancer cells T-47D and MCF-7.

Functionalized graphene/polystyrene composite, green synthesis and characterization

A composite of sulfonated waste polystyrene (SWPS) and graphene oxide was synthetized by an inverse coprecipitation in-situ compound technology. Polystyrene (PS) has a wide range of applications due to its high mechanical property. the graphene were incorporated into sulfonated polystyrene (SPS) to improve the thermal stability and mechanical performance of the composites. Functionalized graphene were synthesized with tour method by using recovered anode (graphite) of dry batteries while sulfonated waste expanded polystyrene was obtained through sulfonation of the polymer. The SPS and GO + SPS composite were characterized using by Fourier Transform Infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). While the degree of sulfonation (DS) was determined through elemental analysis. The results show the degree of sulfonation of the composite is 23.5% and its ion exchange capacity is 1.2 meq g^-1. TEM analysis revealed that the GO particles were loaded on the surface of sulphonated polystyrene and that the SWPS was intercalated into the sub-layers of nanoG homogeneously, which result in an increase in electrical conduction.

An Update on Graphene Oxide: Applications and Toxicity

Graphene oxide (GO) has attracted much attention in the past few years because of its interesting and promising electrical, thermal, mechanical, and structural properties. These properties can be altered, as GO can be readily functionalized. Brodie synthesized the GO in 1859 by reacting graphite with KClO3 in the presence of fuming HNO3; the reaction took 3-4 days to complete at 333 K. Since then, various schemes have been developed to reduce the reaction time, increase the yield, and minimize the release of toxic byproducts (NO2 and N2O4). The modified Hummers method has been widely accepted to produce GO in bulk. Due to its versatile characteristics, GO has a wide range of applications in different fields like tissue engineering, photocatalysis, catalysis, and biomedical applications. Its porous structure is considered appropriate for tissue and organ regeneration. Various branches of tissue engineering are being extensively explored, such as bone, neural, dentistry, cartilage, and skin tissue engineering. The band gap of GO can be easily tuned, and therefore it has a wide range of photocatalytic applications as well: the degradation of organic contaminants, hydrogen generation, and CO2 reduction, etc. GO could be a potential nanocarrier in drug delivery systems, gene delivery, biological sensing, and antibacterial nanocomposites due to its large surface area and high density, as it is highly functionalized with oxygen-containing functional groups. GO or its composites are found to be toxic to various biological species and as also discussed in this review. It has been observed that superoxide dismutase (SOD) and reactive oxygen species (ROS) levels gradually increase over a period after GO is introduced in the biological systems. Hence, GO at specific concentrations is toxic for various species like earthworms, Chironomus riparius, Zebrafish, etc.

Nanoparticles as Next-Generation Tooth-Whitening Agents: Progress and Perspectives

Whitening agents, such as hydrogen peroxide and carbamide peroxide, are currently used in clinical applications for dental esthetic and dental care. However, the free radicals generated by whitening agents cause pathological damage; therefore, their safety issues remain controversial. Furthermore, whitening agents are known to be unstable and short-lived. Since 2001, nanoparticles (NPs) have been researched for use in tooth whitening. Importantly, nanoparticles not only function as abrasives but also release reactive oxygen species and help remineralization. This review outlines the historical development of several NPs based on their whitening effects and side effects. NPs can be categorized into metals or metal oxides, ceramic particles, graphene oxide, and piezoelectric particles. Moreover, the status quo and future prospects are discussed, and recent progress in the development of NPs and their applications in various fields requiring tooth whitening is examined. This review promotes the research and development of next-generation NPs for use in tooth whitening.

Evolution of graphene oxide (GO)-based nanohybrid materials with diverse compositions: an overview

The discovery of the 2D nanostructure of graphene was in fact the beginning of a new generation of materials. Graphene itself, its oxidized form graphene oxide (GO), the reduced form of GO (RGO) and their numerous composites are associates of this generation. Out of this spectrum of materials, the development of GO and related hybrid materials has been reviewed in the present article. GO can be functionalized with metals (Ag and Mg) and metal oxides (CuO, MgO, Fe2O3, Ag2O, etc.) nanoparticles (NPs), organic ligands (chitosan and EDTA) and can also be dispersed in different polymeric matrices (PVA, PMMA, PPy, and PAn). All these combinations give rise to nanohybrid materials with improved functionality. An updated report on the chronological development of such nanohybrid materials of diverse nature has been delivered in the present context. Modifications in synthesis methodologies as well as performances and applications of individual materials are addressed accordingly. The functional properties of GO were synergistically modified by photoactive semiconductor NPs; as a result, the GO-MO hybrids acquired excellent photocatalytic ability and were able to degrade a large variety of organic dyes (MB, RhB, MO, MR, etc.) and pathogens. The large surface area of GO was successfully complemented by the NPs so that high and selective adsorption capacity towards metal ions and organic molecules as well as improved charge separation properties could be achieved. As a result, GO-MO hybrids have been considered effective materials in water purification, energy storage and antibacterial applications. GO-MO hybrids with magnetic particles have exhibited selective destruction of cancerous cells and controlled drug release properties, extremely important in the pharmaceutical field. Chitosan and EDTA-modified GO could form 3D network-like structures with strong efficiency in removing heavy metal ions and organic pollutants. GO as a filler enhanced the strength, flexibility and functional properties of common polymers, such as PVA and PVC, to a large extent while, GO-CP composites with polyaniline and polypyrrole are considered suitable for the fabrication of biosensors, supercapacitors, and MEMS as well as efficient photothermal therapy agents. In summary, GO-based hybrids with inorganic and organic counterparts have been designed, the unique properties of which are exploited in versatile fields of applications.

Wood ash biocatalyst as a novel green catalyst and its application for the synthesis of benzochromene derivatives

Wood ash is a naturally alkaline derived substance containing organic and inorganic constituents. This study investigates the catalytic activity of wood ash as a heterogeneous catalyst for the synthesis of benzochromene derivatives. Several wood ash catalysts, comprising calcium- and potassium-rich carbonates, were prepared from different natural resources under various combustion temperatures. The prepared catalysts were characterized by Fourier transform infrared, scanning electron microscopy, energy dispersive X-ray analysis, transmission electron microscopy, and X-ray diffraction techniques. Catalytic efficiency of the resultant catalysts was tested in the synthesis of benzochromene derivatives. The experimental studies clarified that the catalyst prepared at 850 °C could efficiently expedite the formation of three-component synthesis of benzochromene derivatives in water at 80 °C with high yields. Indeed, alkali, alkaline metal, and metal oxides such as Al2O3, SiO2, MgO, CaO, and Fe2O3, are widely utilized as both catalyst and catalyst support in the heterogeneous catalytic processes. The prepared wood ash catalysts (possessing metal oxides, e.g., CuO, Al2O3, SiO2, and CaO) could effectively prompt the electrophilic activity of the carbonyl groups during the nucleophilic attack intermediate, enhancing the efficiency of the reactions.

Functionalization of graphene oxide with a hybrid P, N ligand for immobilizing and stabilizing economical and non-toxic nanosized CuO: an efficient, robust and reusable catalyst for the C–O coupling reaction in O-arylation of phenol

A new graphene oxide based heterogeneous catalytic system holding CuO nanoparticles through P and N donor sites for the C–O coupling reaction.

1T-MoS2 catalysed reduction of nitroarenes and a one-pot synthesis of imines

An expedient synthesis of aromatic amines and imines via the reduction of nitroaromatics using 1T-MoS2 as a heterogeneous catalyst.

Kinetic 2D Crystals via Topochemical Approach

The designing of novel materials is a fascinating and innovative pathway in materials science. Particularly, novel layered compounds have tremendous influence in various research fields. Advanced fundamental studies covering various aspects, including reactants and synthetic methods, are required to obtain novel layered materials with unique physical and chemical properties. Among the promising synthetic techniques, topochemical approaches have afforded the platform for widening the extent of novel 2D materials. Notably, the synthesis of binary layered materials is considered as a major scientific breakthrough after the synthesis of graphene as they exhibit a wide spectrum of material properties with varied potential applicability. In this review, a comprehensive overview of the progress in the development of metastable layered compounds is presented. The various metastable layered compounds synthesized from layered ternary bulk materials through topochemical approaches are listed, followed by the descriptions of their mechanisms, structural analyses, characterizations, and potential applications. Finally, an essential research direction concerning the synthesis of new materials is indicated, wherein the possible application of topochemical approaches in unprecedented areas is explored.

α-Fe2O3/graphene oxide powder and thin film nanocomposites as peculiar photocatalysts for dye removal from wastewater

In this study, hematite graphene oxide (αFe₂O₃-GO) powder nanocomposites and thin-film hematite graphene oxide (αFe₂O₃-GO) were synthesized for application in the removal of Rhodamine B (RhB) from textile wastewater. αFe₂O₃-GO nanomaterials were placed onto the FTO substrate to form a thin layer of nanocomposites. Different analysis including XRD, FTIR, Raman spectra, XPS, and FESEM were done to analyze the morphology, structure, and properties of the synthesized composites as well as the chemical interactions of αFe₂O₃ with GO. The photocatalytic performance of two synthesized composites was compared with different concentrations of αFe₂O₃-GO. The results showed that powder nanocomposites are more effective than thin-film composites for the removal of RhB dye. αFe₂O₃-GO-5% powder nanocomposites removed over 64% of dye while thin-film nanocomposites had less removal efficiencies with just under 47% removal rate. The reusability test was done for both materials in which αFe₂O₃-GO-5% powder nanocomposites removed a higher rate of dye (up to 63%) in more cycles (6 cycles).

Construction of a PCN/Fe2O3/CdS double Z-type heterojunction photocatalyst and its application in the oxidative coupling reaction of benzylamine

In this work, a PCN/Fe2O3/CdS ternary heterojuction photocatalyst was constructed by introducing an appropriate amount of ferric oxide (Fe2O3) and cadmium sulfide (CdS) onto porous carbon nitride (PCN), denoted as PCN/Fe2O3/CdS. In the presence of PCN/Fe2O3/CdS, the turnover frequency value and selectivity of the oxidative coupling reaction of benzylamine were 6740 μmol g-1 h-1 and 99.4%, respectively. The excellent catalytic performance of the PCN/Fe2O3/CdS photocatalyst is attributed to fully exposed active sites due to the porous structure of PCN, improved light utilization efficiency by introduction of Fe2O3 and CdS, and increased mobility of e--h+ pairs by construction of a ternary heterostructure, and was proved by the analysis of its structural and optical properties. According to the substrate scope study and Hammett diagram analysis, the rate determining step of the benzylamine self-coupling reaction photocatalyzed by PCN/Fe2O3/CdS was the condensation of imine and benzylamine into N-benzylidenebenzylamine. The results of the free radical quenching experiment and electron spin resonance tests showed that h+ played a major role in the photoreaction process, followed by ˙O2- and ˙OH. After four photocatalytic reaction cycles, the catalytic performance of the PCN/Fe2O3/CdS heterojunction composite material remained good. Finally, combined with the free radical trapping experiment and energy band structure analysis, a possible double Z-type reaction mechanism was proposed.

Surface decorated magnetic nanoparticles with Mn-porphyrin as an effective catalyst for oxidation of sulfides

Mn-porphyrin complex was anchored coordinatively to silica-coated surface of magnetic nanoparticles (SMNP). Afterward, a heterogeneous nanocatalyst (Fe3O4@SiO2-MnTCPP) has been characterized by Fourier transform infrared (FT-IR), ultraviolet-visible (UV-vis) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), vibrating sample magnetometry (VSM), thermogravimetric analysis (TGA), and transmission electron microscope (TEM). A thermal stability up to around 350[Formula: see text]C was verified for prepared nanocatalyst based on thermogravimetric analysis. Finally, the catalytic performance of magnetically recoverable Mn-catalyst was exploited in the green oxidation of different sulfides with urea hydrogen peroxide (UHP) in the presence of imidazole as co-catalyst in ethanol under heterogeneous conditions. The eco-friendly property of ethanol strongly induced us to employ it as the reaction solvent in this oxidation system. Complete conversion ([Formula: see text]99) of sulfides to the corresponding sulfoxide or sulfones was obtained for ethyl phenyl sulfide, phenyl vinyl sulfide, diallyl sulfide, thiocyanatoethane, 2-ethyl mercaptoethanol and tetrahydrothiophene. Moreover, the recovered catalysts keep constant conversion yield up to at least three cycles.

Carbon-based nanomaterials for targeted cancer nanotherapy: recent trends and future prospects

Carbon-based nanomaterials are becoming attractive materials due to their unique structural dimensions and promising mechanical, electrical, thermal, optical and chemical characteristics. Carbon nanotubes, graphene, graphene oxide, carbon and graphene quantum dots have numerous applications in diverse areas, including biosensing, drug/gene delivery, tissue engineering, imaging, regenerative medicine, diagnosis, and cancer therapy. Cancer remains one of the major health problems all over the world, and several therapeutic approaches are focussed on designing targeted anticancer drug delivery nanosystems by applying benign and less hazardous resources with high biocompatibility, ease of functionalization, remarkable targeted therapy issues, and low adverse effects. This review highlights the recent development on these carbon based-nanomaterials in the field of targeted cancer therapy and discusses their possible and promising diagnostic and therapeutic applications for the treatment of cancers.

Influence of the ZrO2 Crystalline Phases on the Nature of Active Sites in PdCu/ZrO2 Catalysts for the Methanol Steam Reforming Reaction—An In Situ Spectroscopic Study

In this work, the electronic properties of the metal sites in cubic and monoclinic ZrO2 supported Pd and PdCu catalysts have been investigated using CO as probe molecule in in-situ IR studies, and the surface composition of the outermost layers has been studied by APXPS (Ambient Pressure X-ray Photoemission Spectroscopy). The reaction products were followed by mass spectrometry, making it possible to relate the chemical properties of the catalysts under reaction conditions with their selectivity. Combining these techniques, it has been shown that the structure of the support (monoclinic or cubic ZrO2) affects the metal dispersion, mobility, and reorganization of metal sites under methanol steam reforming (MSR) conditions, influencing the oxidation state of surface metal species, with important consequences in the catalytic activity. Correlating the mass spectra of the reaction products with these spectroscopic studies, it was possible to conclude that electropositive metal species play an imperative role for high CO2 and H2 selectivity in the MSR reaction (less CO formation).

Cu/CuO Composite Track-Etched Membranes for Catalytic Decomposition of Nitrophenols and Removal of As(III)

One of the promising applications of nanomaterials is to use them as catalysts and sorbents to remove toxic pollutants such as nitroaromatic compounds and heavy metal ions for environmental protection. This work reports the synthesis of Cu/CuO-deposited composite track-etched membranes through low-temperature annealing and their application in catalysis and sorption. The synthesized Cu/CuO/poly(ethylene terephthalate) (PET) composites presented efficient catalytic activity with high conversion yield in the reduction of nitro aryl compounds to their corresponding amino derivatives. It has been found that increasing the time of annealing raises the ratio of the copper(II) oxide (CuO) tenorite phase in the structure, which leads to a significant increase in the catalytic activity of the composites. The samples presented maximum catalytic activity after 5 h of annealing, where the ratio of CuO phase and the degree of crystallinity were 64.3% and 62.7%, respectively. The catalytic activity of pristine and annealed composites was tested in the reduction of 4-nitroaniline and was shown to remain practically unchanged for five consecutive test cycles. Composites annealed at 140 °C were also tested for their capacity to absorb arsenic(III) ions in cross-flow mode. It was observed that the sorption capacity of composite membranes increased by 48.7% compared to the pristine sample and reached its maximum after 10 h of annealing, then gradually decreased by 24% with further annealing.

Laser digital patterning of conductive electrodes using metal oxide nanomaterials

As an alternative approach to the conventional deposition and photolithographic processes, the laser digital patterning (LDP) process, which is also known as the laser direct writing process, has attracted considerable attention because it is a non-photolithographic, non-vacuum, on-demand, and cost-effective electrode fabrication route that can be applied to various substrates, including heat-sensitive flexible substrates. The LDP process was initially developed using noble metal nanoparticles (NPs) such as Au and Ag because such materials are free from oxidation even in a nanosize configuration. Thus, the NPs must be fused together to form continuous conductive structures upon laser irradiation. However, common metals are easily oxidized at the nanoscale and exist in oxidized forms owing to the extremely large surface-to-volume ratio of NPs. Therefore, to fabricate conductive electrodes using common metal NPs via the LDP process, laser irradiation should be used to sinter the NPs and simultaneously induce additional photochemical reactions, such as reduction, and defect structure modification to increase the conductivity of the electrodes. This review summarizes recent studies on the LDP process in which metal oxide NPs, such as ITO, ZnO, CuO, and NiO, were exclusively utilized for fabricating conductive electrodes. The outlook of the LDP process for these materials is also discussed as a method that can be used together with or as a replacement for conventional ones to produce next-generation transparent conductors, sensors, and electronics.

Recent Advances in the Aptamer-Based Electrochemical Biosensors for Detecting Aflatoxin B1 and Its Pertinent Metabolite Aflatoxin M1

The notable toxicological impacts of aflatoxin B1 (AFB1) and its main metabolite, aflatoxin M1 (AFM1), on human being health make the evaluation of food quality highly significant. Due to the toxicity of those metabolites-even very low content in foodstuffs-it is crucial to design a sensitive and reliable procedure for their detection. Electrochemical aptamer-based biosensors are considered the most encouraging option, based on multi-placed analysis, rapid response, high sensitivity and specificity. The present review specifically emphasizes the potential utilization of the electrochemical aptasensors for determining the AFM1 and AFB1 with different electrodes.

Developments and applications of nanomaterial-based carbon paste electrodes

This review summarizes the progress that has been made in the past ten years in the field of electrochemical sensing using nanomaterial-based carbon paste electrodes. Following an introduction into the field, a first large section covers sensors for biological species and pharmaceutical compounds (with subsections on sensors for antioxidants, catecholamines and amino acids). The next section covers sensors for environmental pollutants (with subsections on sensors for pesticides and heavy metal ions). Several tables are presented that give an overview on the wealth of methods (differential pulse voltammetry, square wave voltammetry, amperometry, etc.) and different nanomaterials available. A concluding section summarizes the status, addresses future challenges, and gives an outlook on potential trends.

Vertically Coated Graphene Oxide Micro-Well Arrays for Highly Efficient Cancer Spheroid Formation and Drug Screening

Research on the 3D culturing of cancer cells that better mimic in vivo solid tumors is important for efficient drug screening. Herein, a new platform that effectively facilitates the formation of cancer spheroids for anticancer drug screening is reported. Cytophilic graphene oxide (GO), when selectively coated on the sidewalls of micro-wells fabricated from a cell-adhesion-resistive polymer, is found to efficiently initiates distinct donut-like formation of cancer cell spheroids. Scanning electron microscopy and Raman mapping are used to analyze vertically coated GO micropatterns (vGO-MPs) of different sizes (100-250 µm) on polymer platforms, and human liver cancer cells (HepG2), as a model cancer, are seeded on these platforms. Remarkably, the 150 µm-sized platform is found to easily and rapidly generate 3D spheroids in the absence of cell-adhesion proteins. In addition, owing to the unique characteristics of GO, vGO-MPs are highly stable for long periods of time (≈1 month), even under harsh conditions (>70 °C). Moreover, the anticancer effects of two drugs (hydroxyurea and cisplatin) and the potential anticancer compound (curcumin) on HepG2 cells are demonstrated by simply measuring decreases in spheroid sizes. Hence, this new platform is highly promising as a cancer spheroid-forming material for rapid drug screening.

Selective Atomic Layer Deposition of Metals on Graphene for Transparent Conducting Electrode Application

Although graphene has considerable potential as a next-generation transparent conducting electrode (TCE) material owing to its excellent optical transparency and flexibility, its electrical properties require further improvement for industrial application. This study reports a pathway of doping graphene by selective atomic layer deposition (ALD) of metals to elevate the electrical conductivity of graphene. Introduction of a novel Pt precursor [dimethyl(N,N-dimethyl-3-butene-1-amine-N)platinum(II); C₈H₁₉NPt; DDAP] facilitates a low-temperature (165 °C) process. The sheet resistance (R_s) of graphene is reduced significantly from 471 to 86.8 Ω sq^-1 after 200 cycles of Pt ALD, while the optical transmittance at 550 nm (T) is maintained above 90% up to 200 cycles due to the selective growth of Pt on the defects of graphene. Furthermore, comprehensive analysis, including metal (Ru, Pt, and Ni) ALD on graphene, metal (Ru, Pt, Ni, Au, and Co) evaporation on graphene, and change in the ALD chemicals, demonstrates that ALD allows efficient graphene doping and the oxygen affinity of the metal is one of the key properties for efficient graphene doping. Finally, Pt ALD is applied to a multilayer graphene to further reduce R_s down to 75.8 Ω sq^-1 yet to be highly transparent (T: 87.3%) after 200 cycles. In summary, the selective ALD of metals opens a way of improving the electrical properties of graphene to a level required for the industrial TCE application and has the potential to promote development of other types of functional metal-graphene composites.

Electrochemical activity of Samarium on starch-derived porous carbon: rechargeable Li- and Al-ion batteries

Rechargeable metal-ion batteries are considered promising electric storage systems to meet the emerging demand from electric vehicles, electronics, and electric grids. Thus far, secondary Li-ion batteries (LIBs) have seen great advances in terms of both their energy and their power density. However, safety issues remain a challenge. Therefore, rechargeable Al-ion batteries (AIBs) with a highly reliable safety advantage and active electrochemical performances have gathered intensive attention. However, the common issue for these two metal-ion batteries is the lack of cathode materials. Many advanced electrode materials reported provide greatly enhanced electrochemical properties. However, their inherent disadvantages-such as complicated fabrication procedures, restricted manufacturing parameters, and the requirement of expensive instruments-limits their potential for further applications. In this work, we demonstrate the high electrochemical activity of the lanthanide element, Sm, towards storing charges when used in both LIBs and AIBs. Lanthanide elements are often overlooked; however, they generally have attractive electrochemical properties owing to their unpaired electrons. We employed starch as both a low-cost carbon source and as a three-dimensional support for Sm metal nanoparticles. The composite product is fabricated using a one-pot wet-chemical method, followed by a simultaneous carbonization process. As a result, highly improved electrochemical properties are obtained when it is used as a cathode material for both LIBs and AIBs when compared to bare starch-derived C. Our results may introduce a new avenue toward the design of high-performance electrode materials for LIBs and AIBs.

Rendering Redox Reactions of Cathodes in Li-Ion Capacitors Enabled by Lanthanides

Capacitors allow extremely fast charge and discharge operations, which is a challenge faced by recent metal-ion batteries despite having highly improved energy densities. Thus, combined type electric energy storage devices that can integrate high energy density and high power density with high potentials, can overcome the shortcomings of the current metal-ion batteries and capacitors. However, the limited capacities of cathode materials owing to the barren redox reactions are regarded as an obstacle for the development of future high-performance hybrid metal-ion capacitors. In this study, we demonstrate the redox-reaction-rendering effect of the much overlooked lanthanide elements when used as the cathode of lithium-ion capacitors using the mesoporous carbon (MC) as a matrix material. Consequently, these lanthanide elements can effectively enrich the redox reaction, thus improving the capacity of the matrix materials by more than two times. Typically, the Gd-elemental decoration of MC surprisingly enhances the capacity by almost two times as compared with the underacted MC. Furthermore, the La nanoparticles (NPs) decoration depicts the same behavior. Evident redox peaks were formed on the original rectangular cyclic voltammetry (CV) curves. This study provides the first example of embedding lanthanide elements on matrix materials to enrich the desired redox reactions for improving the electrochemical performances.

Magnetically recoverable porphyrin-based nanocatalysts for the effective oxidation of olefins with hydrogen peroxide: a comparative study

A simple method for the functionalization of magnetic nanoparticles, which is achieved by the attachment of metalloporphyrin onto the surface of amine functionalized silica-coated magnetic nanoparticles via an amide bond.

Simulation and Sensitivity Analysis of Molybdenum Disulfide Nanoparticle Production Using Aspen Plus

The sensitivity analysis of molybdenum disulfide nanoparticles synthesis process is studied using Aspen Plus with the aim of investigating the effect of reactants’ amounts on the production of molybdenum disulfide nanoparticles. The adopted approach consists in simulating the synthesis process based on experimental data, obtained at laboratory scale followed by sensitivity analysis with respect to the following precursors: ammonium heptamolybdate, elemental sulfur, and hydrazine used as a reducing agent. The sensitivity analysis revealed that the precursors have more significant impact on the obtained amount of molybdenum disulfide compared to hydrazine. The obtained result showed that the approach adopted in the study might be of interest for further investigation of the process design and scaling-up.

Palladium Nanocatalysts on Hydroxyapatite: Green Oxidation of Alcohols and Reduction of Nitroarenes in Water

A green procedure is described for supporting Pd nanoparticles on hydroxyapatite (HAP), which serves as a highly-stable heterogeneous catalyst displaying excellent activity for the aqueous expeditious reduction of nitroaromatics to the corresponding amines with sodium borohydride, and oxidation of primary and secondary alcohols by hydrogen peroxide with high yields and selectivities. The structural features of the prepared catalyst are confirmed by latest techniques including field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The reusability of the heterogeneous catalyst was affirmed in the aqueous reduction of nitrobenzene and oxidation of cycloheptanol for six consecutive runs without significant loss of catalytic activity.

Synergistic Effects of ppm Levels of Palladium on Natural Clinochlore for Reduction of Nitroarenes

Augmenting the modified naturally occurring clay clinochlore with ppm amounts of palladium leads to a new and very effective reagent for the reduction of numerous aromatic nitro species. When palladium nanoparticles are supported on pyridyltriazole-modified clinochlore, iron within clinochlore acts synergistically with palladium to catalyze the reduction of a wide variety of nitroarenes at room temperature in aqueous media. Based on E-factor calculations, the catalyst system is found to be in line with green chemistry standards and can be recycled up to five times.

Two-dimensional boron nitride as a sulfur fixer for high performance rechargeable aluminum-sulfur batteries

Aluminum-ion batteries (AIBs) are regarded as promising candidates for post-lithium-ion batteries due to their lack of flammability and electrochemical performance comparable to other metal-ion batteries. The lack of suitable cathode materials, however, has hindered the development of high-performing AIBs. Sulfur is a cost-efficient material, having distinguished electrochemical properties, and is considered an attractive cathode material for AIBs. Several pioneering reports have shown that aluminum-sulfur batteries (ASBs) exhibit superior electrochemical capacity over other cathode materials for AIBs. However, a rapid decay in the capacity is a huge barrier for their practical applications. Here, we have demonstrated systematically for the first time that the two-dimensional layered materials (e.g. MoS2, WS2, and BN) can serve as fixers of S and sulfide compounds during repeated charge/discharge processes; BN/S/C displays the highest capacity of 532 mAh g-1 (at a current density of 100 mA g-1) compared with the current state-of-the-art cathode material for AIBs. Further, we could improve the life-span of ASBs to an unprecedented 300 cycles with a high Coulombic efficiency of 94.3%; discharge plateaus at ~1.15 V vs. AlCl4-/Al was clearly observed during repeated charge/discharge cycling. We believe that this work opens up a new method for achieving high-performing ASBs.

Electron Beam Induced Enhancement of the Catalytic Properties of Ion-Track Membranes Supported Copper Nanotubes in the Reaction of the P-Nitrophenol Reduction

This study considers the effect of various doses of electron irradiation on the crystal structure and properties of composite catalysts based on polyethylene terephthalate track-etched membranes and copper nanotubes. Copper nanotubes were obtained by electroless template synthesis and irradiated with electrons with 3.8 MeV energy in the dose range of 100–250 kGy in increments of 50 kGy. The original and irradiated samples of composites were investigated by X-ray diffraction technique (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The improved catalytic activity of composite membranes with copper nanotubes was demonstrated by the example of the reduction reaction of p-nitrophenol in the presence of sodium borohydride. Irradiation with electrons at doses of 100 and 150 kGy led to reaction rate constant increases by 35 and 59%, respectively, compared to the non-irradiated sample. This enhancing catalytic activity could be attributed to the changing of the crystallite size of copper, as well as the surface roughness of the composite membrane.