In vitro response of THP-1 derived macrophages to antimicrobially effective PHMB-coated Ti6Al4V alloy implant material with and without contamination with S. epidermidis and P. aeruginosa

Race for the surface between THP-1 macrophages and Staphylococcus aureus on various titanium implants with well-defined topography and wettability

Gristina et al. (1987) suggested that the fate of a biomaterial is decided in a "race for the surface" between pathogens and the host. To gain deeper insight into the mechanisms behind this concept, we investigated the "race for the surface" across three co-culture scenarios with THP-1 macrophages and Staphylococcus aureus (1:1 ratio), varying the order of addition: (i) simultaneous, (ii) macrophages first, and (iii) S. aureus first, on six Ti6Al4V-ELI surfaces modified with specific topographies and wettability. The outcome of the race for the surface was not influenced by these biomaterials but by the chronological introduction of macrophages and S. aureus. When macrophages and S. aureus arrived simultaneously, macrophages won the race, leading to the lowest number of viable S. aureus through rapid phagocytosis and killing. When macrophages arrived and established first, macrophages still prevailed but under greater challenge resulting from the lower bacterial killing efficiency of adherent macrophages and numerous viable intracellular bacteria, supporting the concept of the so-called immunocompromised zone around implants (upregulation of TLR-2 receptor and pro-inflammatory IL-1β). When S. aureus arrived first establishing a biofilm, bacteria won the race, leading to macrophage dysfunction and cell death (upregulation of FcγR and TLR-2 receptors, NF-κB signaling, NOX2 mediated reactive oxygen species), contributing to a persistent biofilm phenotype (upregulation of clfA, icaA, sarA, downregulation of agrA, hld, lukAB) and intracellular survival of S. aureus (lipA upregulation). The clinical implications are bacterial colonization of the implant and persistence of intracellular bacteria in periprosthetic tissues, which can lead to infection chronicity. STATEMENT OF SIGNIFICANCE: Gristina et al. (1987) suggested that the fate of a biomaterial is decided in a "race for the surface" between bacterial pathogens and host cells. There is a lack of in vitro co-culture models and knowledge on macrophage-S. aureus interactions on biomaterial surfaces, and no studies have evaluated the expression of virulence factors in S. aureus biofilms. We have successfully developed co-culture models and molecular panels, and elucidated important cellular and molecular interactions between macrophages and S. aureus on a broad range of titanium biomaterials with well-defined surface topography and wettability. Our findings highlight the critical role of biofilm formation and the chronological order of bacteria or macrophage arrival in determining the fate of the race for the surface.

LCST/UCST behavior of polysaccharides for hydrogel fabrication

Hydrogel-based scaffolds play a crucial role in widespread biotechnological applications by providing physicochemical stability to loaded cells or therapeutic agents, interacting with organismal microenvironments, and controlling cargo release. Polysaccharides are regarded as attractive candidates among substrate materials because of their high water-retaining capacity, reactive functional groups, ease of gelation, low immunogenicity, biodegradability, and biocompatibility. However, employing polysaccharide-based hydrogel scaffolds for practical use in response to ongoing physiological and pathological changes within the human body, such as insufficient mechanical strength, uncertain degradation, and uncontrollable release patterns, is challenging. Several physically noncovalent or chemically covalent crosslinking strategies have been utilized to modify the physicochemical properties and biofunctionality of polysaccharide-based hydrogels. Among them, thermo-responsive gelation systems have been considered a promising approach for fabricating advanced scaffolds, referred to as 'stimuli-responsive' or 'smart' hydrogels. This is because of the sol-gel transition with a single trigger, requiring no further environmental or chemical intervention, and in situ and reversible gelation under ambient physiological temperature changes in a minimally invasive manner. This review highlights the classification, reaction mechanisms, characteristics, and advanced studies on thermo-responsive polysaccharides exploited in various biomedical fields.

Enhancing diabetic wound healing through anti-bacterial and promoting angiogenesis using dual-functional slow-release microspheres-loaded dermal scaffolds

Bacterial infections and the degeneration of the capillary network comprise the primary factors that contribute to the delayed healing of diabetic wounds. However, treatment modalities that cater to effective diabetic wounds healing in clinical settings are severely lacking. Herein, a dual-functional microsphere carrier was designed, which encapsulates polyhexamethylene biguanide (PHMB) or recombinant human vascular endothelial growth factor (rhVEGF) together. The in vitro release experiments demonstrated that the use of the microspheres ensured the sustained release of the drugs (PHMB or rhVEGF) over a period of 12 days. Additionally, the integration of these controlled-release microspheres into a dermal scaffold (DS-PLGA@PHMB/rhVEGF) imbued both antibacterial and angiogenic functions to the resulting material. Accordingly, the DS-PLGA@PHMB/rhVEGF scaffold exhibited potent antibacterial properties, effectively suppressing bacterial growth and providing a conducive environment for wound healing, thereby addressing the drawbacks associated with the susceptibility of rhVEGF to deactivation in inflammatory conditions. Additionally, the histological analysis revealed that the use of the DS-PLGA@PHMB/rhVEGF scaffold accelerated the process of wound healing by inhibiting inflammatory reactions, stimulating the production of collagen formation, and enhancing angiogenesis. This provides a novel solution for enhancing the antibacterial and vascularization capabilities of artificial dermal scaffolds, providing a beacon of hope for improving diabetic wound healing.

Modular Prodrug-Engineered Oxygen Nano-Tank With Outstanding Nanoassembly Performance, High Oxygen Loading, and Closed-Loop Tumor Hypoxia Relief

The clinical translation of tumor hypoxia intervention modalities still falls short of expectation, restricted by poor biocompatibility of oxygen-carrying materials, unsatisfactory oxygen loading performance, and abnormally high cellular oxygen consumption-caused insufficient hypoxia relief. Herein, a carrier-free oxygen nano-tank based on modular fluorination prodrug design and co-assembly nanotechnology is elaborately exploited, which is facilely fabricated through the molecular nanoassembly of a fluorinated prodrug (FSSP) of pyropheophorbide a (PPa) and an oxygen consumption inhibitor (atovaquone, ATO). The nano-tank adeptly achieves sufficient oxygen enrichment while simultaneously suppressing oxygen consumption within tumors for complete tumor hypoxia alleviation. Significant, the fluorination module in FSSP not only confers favorable co-assemblage of FSSP and ATO, but also empowers the nanoassembly to readily carry oxygen. As expected, it displays excellent oxygen carrying capacity, favorable pharmacokinetics, on-demand laser-triggerable ATO release, closed-loop tumor hypoxia relief, and significant enhancement to PPa-mediated PDT in vitro and in vivo. This study provides a novel nanotherapeutic paradigm for tumor hypoxia intervention-enhanced cancer therapy.

Evaluating various properties of nanohydroxyapatite synthesized from eggshells and dual-doped with Si4+ and Zn2+: An in vitro study

Background

This study aimed to evaluate morphological, chemical and biocompatible properties of nanohydroxyapatite (N-HA) synthesized from eggshells and dual-doped with Si4+ and Zn2+.

Methods

In the current study, N-HA was synthesized from chicken eggshells using the wet chemical precipitation method and doped with Si4+ and Zn2+. The physical assessment was carried out using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX) analysis, and X-ray diffraction (XRD) analysis. Crystal size was calculated using the Scherrer equation. Cytotoxicity was studied in vitro using the MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide) cytotoxicity assay. The optical density (OD) of each well was obtained and recorded at 570 nm for 24 h (t1), 48 h (t2), 72 h (t3), and 5 days (t4) using a microplate reader.

Results

The results of Si-Zn-doped HA showed a high specific surface area with an irregular nano-sized spherical particle structure. The atomic percentage provided the ratio of calcium to phosphate; for non-doped HA, the atomic Ca/P ratio was 1.6, but for Si-Zn-doped HA, where Zn+2 Ca and Si + replaced 4 substituted P, the atomic ratio (Ca + Zn)/(P + Si) was 1.76. The average crystal size of Si-Zn-doped HA was 46 nm, while for non-doped HA it was 61 nm. both samples were non-toxic and statistically significantly less viable than the control group After 5 days, the mean cell viability of Si-Zn-doped HA (79.17 ± 2.18) was higher than that of non-doped HA (76.26 ± 1.71) (P = 0.091).

Conclusions

The MTT assay results showed that Si-Zn-doped HA is biocompatible. In addition, it showed characteristic physiochemical properties of a large surface area with interconnected porosity.

Recent advances of bone tissue engineering: carbohydrate and ceramic materials, fundamental properties and advanced biofabrication strategies ‒ a comprehensive review

Bone is a dynamic tissue that can always regenerate itself through remodeling to maintain biofunctionality. This tissue performs several vital physiological functions. However, bone scaffolds are required for critical-size damages and fractures, and these can be addressed by bone tissue engineering. Bone tissue engineering (BTE) has the potential to develop scaffolds for repairing critical-size damaged bone. BTE is a multidisciplinary engineered scaffold with the desired properties for repairing damaged bone tissue. Herein, we have provided an overview of the common carbohydrate polymers, fundamental structural, physicochemical, and biological properties, and fabrication techniques for bone tissue engineering. We also discussed advanced biofabrication strategies and provided the limitations and prospects by highlighting significant issues in bone tissue engineering. There are several review articles available on bone tissue engineering. However, we have provided a state-of-the-art review article that discussed recent progress and trends within the last 3-5 years by emphasizing challenges and future perspectives.

Deletion of codY impairs Staphylococcus epidermidis biofilm formation, generation of viable but non-culturable cells and stimulates cytokine production in human macrophages

Introduction. Staphylococcus epidermidis biofilms are one of the major causes of bloodstream infections related to the use of medical devices. The diagnosis of these infections is challenging, delaying their treatment and resulting in increased morbidity and mortality rates. As such, it is urgent to characterize the mechanisms employed by this bacterium to endure antibiotic treatments and the response of the host immune system, to develop more effective therapeutic strategies. In several bacterial species, the gene codY was shown to encode a protein that regulates the expression of genes involved in biofilm formation and immune evasion. Additionally, in a previous study, our group generated evidence indicating that codY is involved in the emergence of viable but non-culturable (VBNC) cells in S. epidermidis.Gap statement/Hypothesis. As such, we hypothesized that the gene codY has have an important role in this bacterium virulence.Aim. This study aimed to assess, for the first time, the impact of the deletion of the gene codY in S. epidermidis virulence, namely, in antibiotic susceptibility, biofilm formation, VBNC state emergence and in vitro host immune system response.Methodology. Using an allelic replacement strategy, we constructed and then characterized an S. epidermidis strain lacking codY, in regards to biofilm and VBNC cell formation, susceptibility to antibiotics as well as their role in the interaction with human blood and plasma. Additionally, we investigate whether the codY gene can impact the activation of innate immune cells by evaluating the production of both pro- and anti-inflammatory cytokines by THP-1 macrophages.Results. We demonstrated that the deletion of the gene codY resulted in biofilms with less c.f.u. counts and fewer VBNC cells. Furthermore, we show that although WT and mutant cells were similarly internalized in vitro by human macrophages, a stronger cytokine response was elicited by the mutant in a toll-like receptor 4-dependent manner.Conclusion. Our results indicate that codY contributes to S. epidermidis virulence, which in turn may have an impact on our ability to manage the biofilm-associated infections caused by this bacterium.

Rechargeable Afterglow Nanotorches for In Vivo Tracing of Cell-Based Microrobots

As one of the self-luminescence imaging approaches that require pre-illumination instead of real-time light excitation, afterglow luminescence imaging has attracted increasing enthusiasm to circumvent tissue autofluorescence. In this work, we developed organic afterglow luminescent nanoprobe (nanotorch), which could emit persistent luminescence more than 10 days upon single light excitation. More importantly, the nanotorch could be remote charged by 660 nm light in a non-invasive manner, which showed great potential for real-time tracing the location of macrophage cell-based microrobots.

Advancing cancer theranostics through biomimetics: A comprehensive review

Nanotheranostics, especially those employing biomimetic approaches, are of substantial interest for molecular imaging and cancer therapy. The incorporation of diagnostics and therapeutics, known as cancer theranostics, represents a promising strategy in modern oncology. Biomimetics, inspired by nature, offers a multidisciplinary avenue with potential in advancing cancer theranostics. This review comprehensively analyses recent progress in biomimetics-based cancer theranostics, emphasizing its role in overcoming current treatment challenges, with a focus on breast, prostate, and skin cancers. Biomimetic approaches have been explored to address multidrug resistance (MDR), emphasizing their role in immunotherapy and photothermal therapy. The specific areas covered include biomimetic drug delivery systems bypassing MDR mechanisms, biomimetic platforms for immune checkpoint blockade, immune cell modulation, and photothermal tumor ablation. Pretargeting techniques enhancing radiotherapeutic agent uptake are discussed, along with a comprehensive review of clinical trials of global nanotheranostics. This review delves into biomimetic materials, nanotechnology, and bioinspired strategies for cancer imaging, diagnosis, and targeted drug delivery. These include imaging probes, contrast agents, and biosensors for enhanced specificity and sensitivity. Biomimetic strategies for targeted drug delivery involve the design of nanoparticles, liposomes, and hydrogels for site-specific delivery and improved therapeutic efficacy. Overall, this current review provides valuable information for investigators, clinicians, and biomedical engineers, offering insights into the latest biomimetics applications in cancer theranostics. Leveraging biomimetics aims to revolutionize cancer diagnosis, treatment, and patient outcomes.

In vitro co-culture models for the assessment of orthopedic antibacterial biomaterials

The antibacterial biofunctionality of bone implants is essential for the prevention and treatment of implant-associated infections (IAI). In vitro co-culture models are utilized to assess this and study bacteria-host cell interactions at the implant interface, aiding our understanding of biomaterial and the immune response against IAI without impeding the peri-implant bone tissue regeneration. This paper reviews existing co-culture models together with their characteristics, results, and clinical relevance. A total of 36 studies were found involving in vitro co-culture models between bacteria and osteogenic or immune cells at the interface with orthopedic antibacterial biomaterials. Most studies (∼67%) involved co-culture models of osteogenic cells and bacteria (osteo-bac), while 33% were co-culture models of immune cells and bacterial cells (im-bac). All models involve direct co-culture of two different cell types. The cell seeding sequence (simultaneous, bacteria-first, and cell-first) was used to mimic clinically relevant conditions and showed the greatest effect on the outcome for both types of co-culture models. The im-bac models are considered more relevant for early peri-implant infections, whereas the osteo-bac models suit late infections. The limitations of the current models and future directions to develop more relevant co-culture models to address specific research questions are also discussed.

Zinc-based biomaterials for bone repair and regeneration: mechanism and applications

Zinc (Zn) is one of the most important trace elements in the human body and plays a key role in various physiological processes, especially in bone metabolism. Zn-containing materials have been reported to enhance bone repair through promoting cell proliferation, osteogenic activity, angiogenesis, and inhibiting osteoclast differentiation. Therefore, Zn-based biomaterials are potential substitutes for traditional bone grafts. In this review, the specific mechanisms of bone formation promotion by Zn-based biomaterials were discussed, and recent developments in their application in bone tissue engineering were summarized. Moreover, the challenges and perspectives of Zn-based biomaterials were concluded, revealing their attractive potential and development directions in the future.

Design of an apoptotic cell-mimetic wound dressing using phosphoserine-chitosan hydrogels

Inflammatory M1 macrophages create a hostile environment that impedes wound healing. Phosphoserine (PS) is a naturally occurring immunosuppressive molecule capable of polarizing macrophages from an inflammatory phenotype (M1) to an anti-inflammatory phenotype (M2). In this study, we designed, fabricated, and characterized PS-immobilized chitosan hydrogels as potential wound dressing materials. A PS group precursor was synthesized via a phosphoramidite reaction and subsequently immobilized onto the chitosan chain through an EDC/N-hydroxysuccinimide reaction using a crosslink moiety HPA. The PS/HPA-conjugated chitosan (CS-PS) was successfully synthesized by deprotecting the PS group in HCl. In addition, the hydrogels were prepared by the HRP/H2O2 enzyme-catalyzed reaction with different PS group contents (0, 7.27, 44.28 and 56.88 μmol g-1). The immobilization of the PS group improved the hydrophilicity of the hydrogels. Interestingly, CS-PS hydrogel treatment upregulated both pro-inflammatory and anti-inflammatory cytokines. This treatment also resulted in alterations in the macrophage cell morphology from the M1 to M2 phenotype. The CS-PS hydrogel significantly accelerated diabetic wound healing. Overall, this study provides insights into the potential of PS-immobilized hydrogel materials for improved inflammatory disease therapy.

Strategies and materials for the prevention and treatment of biofilms

Biofilms are aggregates of organized microbial growth that function as barriers and create a stable internal environment for cell survival. The bacteria in the biofilms exhibit characteristics that are quite different from the planktonic bacteria, such as strong resistance to antibiotics and other bactericides, getting out of host immunity, and developing in harsh environments, which all contribute to the persistent and intractable treatment. Hence, there is an urgent need to develop novel materials and strategies to combat biofilms. However, most of the reviews on anti-biofilms published in recent years are based on specific fields or materials. Microorganisms are ubiquitous, except in the context of medical and health issues; however, biofilms exert detrimental effects on the advancement and progress of various fields. Therefore, this review aims to provide a comprehensive summary of effective strategies and methodologies applicable across all industries. Firstly, the process of biofilms formation was introduced to enhance our comprehension of the "enemy". Secondly, strategies to intervene in the important links of biofilms formation were discussed, taking timely action during the early weak stages of the "enemy". Thirdly, treatment strategies for mature biofilms were summarized to deal with biofilms that break through the defense line. Finally, several substances with antibacterial properties were presented. The review concludes with the standpoint of the author about potential developments of anti-biofilms strategies. This review may help researchers quickly understand the research progress and challenges in the field of anti-biofilms to design more efficient methods and strategies to combat biofilms.

Tumor Microenvironment Activated Photoacoustic-Fluorescence Bimodal Nanoprobe for Precise Chemo-immunotherapy and Immune Response Tracing of Glioblastoma

Synergistic therapy strategy and prognostic monitoring of glioblastoma's immune response to treatment are crucial to optimize patient care and advance clinical outcomes. However, current systemic temozolomide (TMZ) chemotherapy and imaging methods for in vivo tracing of immune responses are inadequate. Herein, we report an all-in-one theranostic nanoprobe (PEG/αCD25-Cy7/TMZ) for precise chemotherapy and real-time immune response tracing of glioblastoma by photoacoustic-fluorescence imaging. The nanoprobe was loaded with TMZ and targeted regulatory T lymphocyte optical dye αCD25-Cy7 encapsulated by glutathione-responsive DSPE-SS-PEG2000. The results showed that the targeted efficiency of the nanoprobe to regulatory T lymphocytes is up to 92.3%. The activation of PEG/αCD25-Cy7/TMZ by glutathione enhanced the precise delivery of TMZ to the tumor microenvironment for local chemotherapy and monitored glioblastoma's boundary by photoacoustic-fluorescence imaging. Immunotherapy with indoleamine 2,3-dioxygenase inhibitors after chemotherapy could promote immunological responses and reduce regulatory T lymphocyte infiltration, which could improve the survival rate. Photoacoustic imaging has in real-time and noninvasively depicted the dynamic process of immune response on a micrometer scale, showing that the infiltration of regulatory T lymphocytes after chemotherapy was up-regulated and would down-regulate after IDO inhibitor treatment. This all-in-one theranostic strategy is a promising method for precisely delivering TMZ and long-term dynamically tracing regulatory T lymphocytes to evaluate the immune response in situ for accurate tumor chemo-immunotherapy.

A diketopyrrolopyrrole-based small molecule with an extended conjugated skeleton and J-aggregation behavior for 808 nm laser triggered phototheranostics

The development of phototheranostic agents, specifically those based on organic small molecules (OSMs) with long wavelength excitation/emission, is an attractive but challenging project. In this contribution, we designed and synthesized a novel conjugate small molecule with a linear structure, named DPP-OPIC. Water-soluble nanoparticle DPP-OPIC NPs were fabricated. They exhibited strong absorption in the region of 600-1000 nm, which was due to the extended conjugate length of the molecular skeleton and J-aggregation behavior. Under 808 nm laser excitation, DPP-OPIC NPs were capable of producing outstanding near-infrared-II (NIR-II, 900-1700 nm) fluorescence. The photoluminescence quantum yield was determined as 0.58%, which enabled high-resolution in vivo tumor imaging. Additionally, a notable photothermal effect with a high photothermal conversion efficiency (41.5%) was achieved by the irradiation of DPP-OPIC NPs. Hence, DPP-OPIC NPs can be used as superior phototheranostic agents, providing valuable contributions to NIR-II fluorescence imaging and photothermal therapy.

Microenvironment-targeted strategy steers advanced bone regeneration

Treatment of large bone defects represents a great challenge in orthopedic and craniomaxillofacial surgery. Traditional strategies in bone tissue engineering have focused primarily on mimicking the extracellular matrix (ECM) of bone in terms of structure and composition. However, the synergistic effects of other cues from the microenvironment during bone regeneration are often neglected. The bone microenvironment is a sophisticated system that includes physiological (e.g., neighboring cells such as macrophages), chemical (e.g., oxygen, pH), and physical factors (e.g., mechanics, acoustics) that dynamically interact with each other. Microenvironment-targeted strategies are increasingly recognized as crucial for successful bone regeneration and offer promising solutions for advancing bone tissue engineering. This review provides a comprehensive overview of current microenvironment-targeted strategies and challenges for bone regeneration and further outlines prospective directions of the approaches in construction of bone organoids.

Unraveling the potential of 3D bioprinted immunomodulatory materials for regulating macrophage polarization: State-of-the-art in bone and associated tissue regeneration

Macrophage-assisted immunomodulation is an alternative strategy in tissue engineering, wherein the interplay between pro-inflammatory and anti-inflammatory macrophage cells and body cells determines the fate of healing or inflammation. Although several reports have demonstrated that tissue regeneration depends on spatial and temporal regulation of the biophysical or biochemical microenvironment of the biomaterial, the underlying molecular mechanism behind immunomodulation is still under consideration for developing immunomodulatory scaffolds. Currently, most fabricated immunomodulatory platforms reported in the literature show regenerative capabilities of a particular tissue, for example, endogenous tissue (e.g., bone, muscle, heart, kidney, and lungs) or exogenous tissue (e.g., skin and eye). In this review, we briefly introduced the necessity of the 3D immunomodulatory scaffolds and nanomaterials, focusing on material properties and their interaction with macrophages for general readers. This review also provides a comprehensive summary of macrophage origin and taxonomy, their diverse functions, and various signal transduction pathways during biomaterial-macrophage interaction, which is particularly helpful for material scientists and clinicians for developing next-generation immunomodulatory scaffolds. From a clinical standpoint, we briefly discussed the role of 3D biomaterial scaffolds and/or nanomaterial composites for macrophage-assisted tissue engineering with a special focus on bone and associated tissues. Finally, a summary with expert opinion is presented to address the challenges and future necessity of 3D bioprinted immunomodulatory materials for tissue engineering.

Transdermal drug delivery via microneedles for musculoskeletal systems

As the population is ageing and lifestyle is changing, the prevalence of musculoskeletal (MSK) disorders is gradually increasing with each passing year, posing a serious threat to the health and quality of the public, especially the elderly. However, currently prevalent treatments for MSK disorders, mainly administered orally and by injection, are not targeted to the specific lesion, resulting in low efficacy along with a series of local and systemic adverse effects. Microneedle (MN) patches loaded with micron-sized needle array, combining the advantages of oral administration and local injection, have become a potentially novel strategy for the administration and treatment of MSK diseases. In this review, we briefly introduce the basics of MNs and focus on the main characteristics of the MSK systems and various types of MN-based transdermal drug delivery (TDD) systems. We emphasize the progress and broad applications of MN-based transdermal drug delivery (TDD) for MSK systems, including osteoporosis, nutritional rickets and some other typical types of arthritis and muscular damage, and in closing summarize the future prospects and challenges of MNs application.

Highly stretchable, self-healable and adhesive, thermal responsive conductive hydrogel loading nanocellulose complex for a flexible sensor

Currently, with the widespread concerns of smart soft sensors in wearable electronics, human health detection and electronic skin, flexible conductive hydrogels have been extensively studied. However, it remains a great challenge to develop hydrogels that have both satisfactory mechanical performance with stretchable and compressible and high conductive. Herein, based on synergistic dynamic hydrogen and metal coordination bonds, polyvinyl alcohol (PVA)/poly (2-hydroxyethyl methacrylate) (PHEMA) hydrogels doped with polypyrrole decorated cellulose nanofibers (CNFs@PPy) are developed via free radical polymerization. The loading versatile CNFs@PPy highlighted the complex hydrogels super-stretchability (approximately 2600 % elongation) and excellent toughness (2.74 MJ/m3) properties to tensile deformation, strong compressive strength (1.96 MPa), fast temperature responsiveness and outstanding strain sensing capability (GF = 3.13). Moreover, the PHEMA/PVA/CNFs@PPy hydrogels possessed rapid self-healing and powerful adhesive abilities to various interfaces without extra assistance, as well as distinguished fatigue resistance performance. Such advantages make the nanocomposite hydrogel displayed high stability and repeatable to both pressure and strain in a wide range of deformations, enabling a promising candidate in the fields of motion monitoring and healthcare management.

Recent advances in near-infrared-II hollow nanoplatforms for photothermal-based cancer treatment

Near-infrared-II (NIR-II, 1000–1700 nm) light-triggered photothermal therapy (PTT) has been regarded as a promising candidate for cancer treatment, but PTT alone often fails to achieve satisfactory curative outcomes. Hollow nanoplatforms prove to be attractive in the biomedical field owing to the merits including good biocompatibility, intrinsic physical-chemical nature and unique hollow structures, etc. On one hand, hollow nanoplatforms themselves can be NIR-II photothermal agents (PTAs), the cavities of which are able to carry diverse therapeutic units to realize multi-modal therapies. On the other hand, NIR-II PTAs are capable of decorating on the surface to combine with the functions of components encapsulated inside the hollow nanoplatforms for synergistic cancer treatment. Notably, PTAs generally can serve as good photoacoustic imaging (PAI) contrast agents (CAs), which means such kind of hollow nanoplatforms are also expected to be multifunctional all-in-one nanotheranostics. In this review, the recent advances of NIR-II hollow nanoplatforms for single-modal PTT, dual-modal PTT/photodynamic therapy (PDT), PTT/chemotherapy, PTT/catalytic therapy and PTT/gas therapy as well as multi-modal PTT/chemodynamic therapy (CDT)/chemotherapy, PTT/chemo/gene therapy and PTT/PDT/CDT/starvation therapy (ST)/immunotherapy are summarized for the first time. Before these, the typical synthetic strategies for hollow structures are presented, and lastly, potential challenges and perspectives related to these novel paradigms for future research and clinical translation are discussed.