Preparation, statistical optimization, and in vitro characterization of insulin nanoparticles composed of quaternized aromatic derivatives of chitosan

Development, Statistical Optimization, and Characterization of Resveratrol-Containing Solid Lipid Nanoparticles (SLNs) and Determination of the Efficacy in Reducing Neurodegenerative Symptoms Related to Alzheimer's Disease: In Vitro and In Vivo Study

Resveratrol (RSV), as a natural polyphenol exhibiting antioxidative properties, is studied in the treatment of neurodegenerative diseases. However, RSV has low oral bioavailability. In this study and in order to overcome the issue, RSV was encapsulated into the solid lipid nanoparticles (SLNs). In this study, RSV-loaded solid lipid nanoparticles (RSV-SLNs) were prepared by the solvent emulsification-evaporation technique, and their physicochemical properties were optimized using Box-Behnken response surface methodology. The morphology of the particles was evaluated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The neuroprotective effects of the nanoparticles were investigated in animal models using the Morris water maze (MWM). Then after, the rats were sacrificed, their brains were collected, and the extent of lipid peroxidase (LPO) as well as the level of reduced glutathione (GSH) were determined in the hippocampus section samples. Finally, the collected brain tissues were histologically studied. The particle size, polydispersity index (PDI), zeta potential, entrapment efficiency (EE%), and drug loading (DL%) of the optimized nanoparticles were 104.5 ± 12.3 nm, 0.322 ± 0.11, -3.1 ± 0.15 mV, 72.9 ± 5.31% and 14.6 ± 0.53%, respectively. The microscopic images revealed spherically shaped and nonaggregated nanoparticles. The in vivo studies demonstrated higher efficiency of RSV-SLN in the reduction of escape latency time and improvement in the time spent in the target quadrant compared to free RSV. Moreover, it was demonstrated that RSV-SLN posed a higher potency in the reduction of LPO as well as elevation of the GSH levels in the brain samples. The histological studies revealed a decline in neural degeneration and an improvement in the CA1 pyramidal cell morphology. The obtained data revealed that RSV-SLNs caused more reduction in Alzheimer-related symptoms rather than free RSV.

Preparation, Characterization and In vitro Evaluation of Insulin-PHBV Nanoparticles/Alginate Hydrogel Composite System for Prolonged Delivery of Insulin

PURPOSE

In the present study, biodegradable poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanoparticles (NPs) containing insulin were loaded in sodium alginate/jeffamine (ALG/jeff) hydrogel for prolonged delivery of insulin. The main aim of this work was to fabricate an efficient insulin delivery system to improve patient adherence by decreasing the repetition of injections.

METHODS

Swelling and morphological properties and crosslinking efficiency of ALG/jeff hydrogel were assessed. The composite hydrogel was prepared by adding PHBV NPs to ALG/jeff hydrogel concurrently with crosslinking process. The morphology and loading capacity of composite hydrogel were analyzed.

RESULTS

Circular dichroism measurement demonstrated that insulin remains stable following fabrication process. The release profile exhibited 54.6 % insulin release from composite hydrogel within 31 days with minor initial burst release equated to nanoparticles and hydrogels. MTT cell viability analysis was performed by applying L-929 cell line and no cytotoxic effect was observed.

CONCLUSIONS

Favorable results clearly introduced fabricated composite hydrogel as an excellent candidate for drug delivery systems and also paves the route for prolonged delivery systems of other proteins.

Eudragit L-100 Capsules Aromatize and Quaternerize Chitosan for Insulin Nanoparticle Oral Delivery During Toxic Oxidative Stress in Rat Liver and Kidney

BACKGROUND

Insulin, like most peptides, is classified as a hydrophilic and macromolecular drug that is considered as a low permeable and unstable compound in the gastrointestinal (GI) tract. The acidic condition of the stomach can degrade insulin molecules. Moreover, the presence of proteolytic activities of some enzymes such as trypsin and chymotrypsin can hydrolyze amide-bonds between various amino-acids in the structures of peptides and proteins. However, due to its simplicity and high patient compliance, oral administration is the most preferred route of systemic drug delivery, and for the development of an oral delivery system, some obstacles in oral administration of peptides and proteins including low permeability and low stability of the proteins in GI should be overcome.

OBJECTIVE

In this study, the effects of orally insulin nanoparticles (INPs) prepared from quaternerized N-aryl derivatives of chitosan on the biochemical factors of the liver in diabetic rats were studied.

METHODS

INPs composed of methylated (amino benzyl) chitosan were prepared by the PEC method. Lyophilized INPs were filled in pre-clinical capsules, and the capsules were enteric-coated with Eudragit L100. Twenty Male Wistar rats were randomly divided into four groups: group1: normal control rats, group 2: diabetic rats, group 3: diabetic rats received capsules INPs(30 U/kg/day, orally), group 4: the diabetic rats received regular insulin (5 U/kg/day, subcutaneously). At the end of the treatment, serum, liver and kidney tissues were collected. Biochemical parameters in serum were measured using spectrophotometric methods. Also, oxidative stress was measured in plasma, liver and kidney. Histological studies were performed using H and E staining .

RESULTS

Biochemical parameters, and liver and kidney injury markers in serum of the diabetic rats that received INPs improved significantly compared with the diabetic group. INPs reduced oxidative toxic stress biomarkers in serum, liver and kidney of the diabetic treated group. Furthermore, a histopathological change was developed in the treated groups.

CONCLUSION

Capsulated INPs can prevent diabetic liver and oxidative kidney damages (similar regular insulin). Therefore oral administration of INPs appears to be safe. Lay Summary: Although oral route is the most preferred route of administration, but oral delivery of peptides and proteins is still a challenging issue. Diabetes Mellitus may lead to severe complications, which most of them are life-threatening. In this study, we are testing the toxicity of oral insulin nanoparticles in kidney and liver of rats. For this investigation, we will prepare insulin nanoparticles composed of a quaternized derivative of chitosan. The nanoparticles will be administered orally to rats and the level of oxidative stress in their liver and kidney will be determined. The data will be compared to the subcutaneous injection of insulin.

NANO-BIOTECHNOLOGY AND ITS INNOVATIVE PERSPECTIVE IN DIABETES MANAGEMENT

Diabetes occurs due to the imbalance of glucose in the body known as glucose homeostasis, thus leading to metabolic changes in the body. The two stages hypoglycemia or hyperglycemia classify diabetes into various categories. Various bio-nanotechnological approaches are coupled up with nano particulates, polymers, liposome, various gold plated and solid lipid particulates, regulating transcellular transport, non specific cellular uptake, and paracellular transport, leading to oral, trans-dermal , pulmonary, buccal , nasal , specific gene oriented administration to avoid the patient's non compliance with the parental routes of administration. Phytochemicals are emerging strategies for the future prospects of diabetes management.

β-Cyclodextrin-containing chitosan-oligonucleotide nanoparticles improve insulin bioactivity, gut cellular permeation and glucose consumption

OBJECTIVES

The main objective of the present study was to develop a nanoparticulate drug delivery system that can protect insulin against harsh conditions in the gastrointestinal (GI) tract. The effects of the following employed techniques, including lyophilisation, cross-linking and nanoencapsulation, on the physicochemical properties of the formulation were investigated.

METHODS

We herein developed a nanocarrier via ionotropic gelation by using positively charged chitosan and negatively charged Dz13Scr. The lyophilised nanoparticles with optimal concentrations of tripolyphosphate (cross-linking agent) and β-cyclodextrin (stabilising agent) were characterised by using physical and cellular assays.

KEY FINDINGS

The addition of cryoprotectants (1% sucrose) in lyophilisation improved the stability of nanoparticles, enhanced the encapsulation efficiency, and ameliorated the pre-mature release of insulin at acidic pH. The developed lyophilised nanoparticles did not display any cytotoxic effects in C2C12 and HT-29 cells. Glucose consumption assays showed that the bioactivity of entrapped insulin was maintained post-incubation in the enzymatic medium.

CONCLUSIONS

Freeze-drying with appropriate cryoprotectant could conserve the physiochemical properties of the nanoparticles. The bioactivity of the entrapped insulin was maintained. The prepared nanoparticles could facilitate the permeation of insulin across the GI cell line.

Preparation, Statistical Optimization and In-vitro Characterization of a Dry Powder Inhaler (DPI) Containing Solid Lipid Nanoparticles Encapsulating Amphotericin B: Ion Paired Complexes with Distearoyl Phosphatidylglycerol

The aim of this study was to prepare dry powder inhalers (DPIs) containing amphotericin B-loaded solid lipid nanoparticles (AMB-SLNs) as an alternative approach for prevention of pulmonary aspergillosis. For solubilizing AMB in small amounts of organic solvents ion paired complexes were firstly formed by establishing electrostatic interaction between AMB and distearoyl phosphatidylglycerol (DSPG). The SLN formulations containing AMB-DSPG complexes were prepared using glycerol monostearate (GMS) as the lipid matrix and soybean lecithin and tween 80 as the surfactants by solvent emulsification-evaporation technique. The nanoparticles were optimized through a fractional factorial design. DPIs were prepared by lyophilization technique using lactose as the inhalational carrier and then after, the formulations were evaluated in terms of aerodynamic particle size distribution using an Andersen cascade impactor. The morphology of the particles was examined using scanning electron microscopy (SEM) and in-vitro drug release profiles were evaluated. Following the statistical results, the particle size, Poly dispersity index (PdI), zeta potential, entrapment efficiency (EE%), and drug loading (DL%) of the optimized SLNs were 187.04 ± 11.97 nm, 0.188 ± 0.028, -30.16 ± 1.6 mV, 89.3 ± 3.47 % and 2.76 ± 0.32 %, respectively. Formulation containing 10% w/v of lactose with the calculated fine particle fraction value as 72.57 ± 4.33% exhibited the appropriate aerodynamic characteristics for pulmonary drug delivery. SEM images revealed de-agglomerated particles. In-vitro release studies showed sustained release of AMB from the carriers and the release kinetics were best fitted to the first order kinetic model.

Fabrication techniques for the preparation of orally administered insulin nanoparticles

The development of orally administered protein drugs is challenging due to their intrinsic unfavourable features, including large molecular size and poor chemical stability, both of which limit gastrointestinal (GI) absorption efficiency. Nanoparticles can overcome the GI barriers effectively and improve the oral bioavailability of proteins in the GI tract. They possess large surface area to volume ratio, and can facilitate the GI absorption of nanoparticles via the paracellular and transcellular routes. Nanoparticles can be prepared by various fabrication techniques that can encapsulate the fragile therapeutic proteins via hydrophobic bonding and electrostatic interaction. A desirable technique should involve minimal harsh conditions and encapsulate therapeutic proteins with preserved functionalities. The current review examines the characteristics of each preparation technique, and illustrates the examples of insulin-loaded nanoparticles that have been developed in each fabrication method. The following techniques, which include nanoprecipitation, hydrophobic conjugation, flash nanocomplexation, double emulsion, ionotropic gelation, and layer-by-layer adsorption, have been used to formulate ligand-modified nanoparticles for targeted delivery of insulin. Other techniques, including reduction, complex coacervation (polyelectrolyte complexation), hydrophobic ion pairing and emulsion solvent diffusion method, and sol-gel technology, were also discussed in the latter part of the review due to their extensive use in fabrication of insulin nanoparticles. This review also discusses the strategies that have been utilised during the formulation process to improve the stability and bioactivity of therapeutic proteins.

Preparation and Nanoencapsulation of Lectin from Lepidium sativum on Chitosan-Tripolyphosphate Nanoparticle and Their Cytotoxicity against Hepatocellular Carcinoma Cells (HepG2)

Lectins are the oligomeric sugar-specific glycoprotein of nonimmune origin, are involved in the multiple biological recognition process, and have the capacity to perform a wide variety of physiological functions including antifungal, antiviral, antitumor, and cell agglutination. The main objective of the current study was to prepare lectin protein-loaded chitosan-TPP nanoparticles via ionic gelation methods with different CS/TPP ratios and to investigate anticancer potential against HepG2 cells. The best ratio showed the mean particle size (298.10 ± 1.9 nm, 21.05 ± 0.95 mv) with optimal encapsulation efficiencies of 52.435 ± 0.09%. The cytotoxicity was evaluated against HepG2 cells, and IC₅₀ values obtained were 265 μg/ml for lectin protein and 105 μg/ml for lectin-loaded chitosan-TPP nanoparticles, respectively. The mRNA expression of proliferation markers like GPC3 was significantly decreased in hepatocellular carcinoma cells (HepG2) during lectin protein-loaded chitosan-TPP nanoparticle treatment. Apoptotic genes that indicating a marked increase in expression are Caspase 3, p53, and Bax, while Bcl2 and AFP showed a downregulation of expression after treatment of HepG2 cells with lectin-loaded chitosan-TPP nanoparticles. The preliminary findings of our study highlighted that lectin protein-loaded chitosan-TPP nanoparticles could be a promising anticancer agent.

Development of orally administered insulin-loaded polymeric-oligonucleotide nanoparticles: statistical optimization and physicochemical characterization

INTRODUCTION

Therapeutic peptides are administered via parenteral route due to poor absorption in the gastrointestinal (GI) tract, instability in gastric acid, and GI enzymes. Polymeric drug delivery systems have achieved significant interest in pharmaceutical research due to its feasibility in protecting proteins, tissue targeting, and controlled drug release pattern.

MATERIALS AND METHODS

In this study, the size, polydispersity index, and zeta potential of insulin-loaded nanoparticles were characterized by dynamic light scattering and laser Doppler micro-electrophoresis. The main and interaction effects of chitosan concentration and Dz13Scr concentration on the physicochemical properties of the prepared insulin-loaded nanoparticles (size, polydispersity index, and zeta potential) were evaluated statistically using analysis of variance. A robust procedure of reversed-phase high-performance liquid chromatography was developed to quantify insulin release in simulated GI buffer. Results and discussion: We reported on the effect of two independent parameters, including polymer concentration and oligonucleotide concentration, on the physical characteristics of particles. Chitosan concentration was significant in predicting the size of insulin-loaded CS-Dz13Scr particles. In terms of zeta potential, both chitosan concentration and squared term of chitosan were significant factors that affect the surface charge of particles, which was attributed to the availability of positively-charged amino groups during interaction with negatively-charged Dz13Scr. The excipients used in this study could fabricate nanoparticles with negligible toxicity in GI cells and skeletal muscle cells. The developed formulation could conserve the physicochemical properties after being stored for 1 month at 4 °C.

CONCLUSION

The obtained results revealed satisfactory results for insulin-loaded CS-Dz13Scr nanoparticles (159.3 nm, pdi 0.331, -1.08 mV). No such similar study has been reported to date to identify the main and interactive significance of the above parameters for the characterization of insulin-loaded polymeric-oligonucleotide nanoparticles. This research is of importance for the understanding and development of protein-loaded nanoparticles for oral delivery.

Preparation, statistical optimization, in vitro characterization, and in vivo pharmacological evaluation of solid lipid nanoparticles encapsulating propolis flavonoids: a novel treatment for skin edema

Propolis is a natural resinous product and exerts anti-inflammatory properties. The aim of this study is formulation and characterization of solid lipid nanoparticles (SLNs) encapsulating propolis flavonoids (PFs), intended for topical treatment of skin edema. The nanoparticles were prepared and statistically optimized using Box-Behnken response surface methodology. The in vitro release profile of the optimized nanoparticles was investigated. Cytotoxicity of nanoparticles on HSF-PI 18 cell line was determined. Permeation and penetration of nanoparticles across the incised skin were measured. Finally, the nanoparticles were incorporated into a pharmaceutical hydrogel formulation and the in vivo efficacy in reduction of skin edema was determined. The size, PdI, zeta potential, entrapment efficiency (EE%) and loading efficiency (LE %) of the optimized nanoparticles were 111.3 ± 19.35 nm, 0.34 ± 0.005, -24.17 ± 3.3 mV, 73.5 ± 0.86%, and 3.2 ± 0.27%, respectively. Data obtained through in vitro release study suggested a burst release followed by a prolonged release behavior up to 24 h post incubation time interval. The prepared SLNs exhibited no cytotoxicity on HSF-PI 18 cell line. Ex vivo permeation and penetration study of nanoparticles across the incised skin showed approximately a 2.5-fold and a 3-fold increase in cumulative amount of transport and cumulative amount of skin penetration, respectively. Finally, in vivo studies in rat models, showed a threefold reduction in volume of the edema in animals treated with SLNs. The obtained data revealed that the prepared SNs entrapping PFs, exert high skin targeting effects, prolonged anti-inflammatory properties and therefore high efficiency in treatment of skin edema.

The effects of synthetic orally administrated insulin nanoparticles in comparison to injectable insulin on the renal function markers of type 1- diabetic rats

OBJECTIVES

Injectable insulin is the most widely used therapy in patients with type 1 diabetes which has several disadvantages. The present study was aimed to evaluate the efficacy of injectable insulin on diabetes mellitus-related complications in comparison to orally encapsulated insulin nanoparticles.

MATERIALS AND METHODS

This study involved 42 Wistar rats separated into 5 groups, including control (C), diabetic control (D), diabetic receiving regular insulin (INS), diabetic receiving encapsulated insulin nanoparticle (INP), and diabetic receiving chitosan for two months. Biochemical parameters in serum and urine were measured using spectrophotometric or ELISA methods. mRNA levels of kidney injury molecule 1 (KIM-1) and neutrophil gelatinase-associated lipocalin (NGAL) were evaluated using quantitative PCR.

RESULTS

There were no significant differences between the two forms of insulin in controlling the glycemic condition (P-value>0.05), but oral INP was more effective in correcting diabetic dyslipidemia in comparison to injectable insulin (P-value<0.05). Urine volume and creatinine excretion were significantly modulated by insulin and oral INP in diabetic groups (P-value<0.05), although the effects of INP on the modulation of execration of urea, acid uric, and albumin was more dramatic. Oral INP caused a significant decrease in urine concentration of KIM-1 and NGAL as well as expression of KIM-1 in renal tissue (P-value<0.05).

CONCLUSION

Our results suggested that oral INP is more effective than injectable insulin in modulation of urine and serum diabetic-related parameters.

A new formulation of hydrophobin-coated niosome as a drug carrier to cancer cells

Hydrophobin-1 (HFB-1) found on the surface of fungal spores, plays a role in the lack of antigen recognition by the host immune system. The present study aimed to evaluate the potential application of HFB-1 for the delivery of doxorubicin (Dox) into different cell lines. Coating the surface of niosomes (Nio) with HFB-1 leads to the hypothesis that this protein can confer protection against in vivo immune-system recognition and prevent the immune response. Thus, HFB-1 could become a promising alternative to polyethylene glycol (PEG). Here, HFB-1-coated niosome loaded with doxorubicin (Dox) based on Span 40, Tween 40 and cholesterol was prepared and compared with the PEG-coated niosome. Physicochemical characteristics of the prepared formulations in terms of size, zeta potential, polydispersity index (PDI), morphology, entrapment efficiency (EE), and release rate were evaluated at different pH levels (2, 5.2, and 7.4). In the end, the in vitro cytotoxicity assay was performed on four different cancer cell lines namely A549, MDA-MB-231, C6 and PC12 in addition to one control cell line (3 T3) to ensure the formulation's selectivity against cancer cells. Results showed that the niosomes coated with HFB-1 presented better size distribution, higher EE, more sustained release profile, enhanced biocompatibility and improved anticancer effects as compared to the PEG-coated niosomes. Interestingly, the viability percentage of the control cell line was higher than different cancer cells when treated with the formulations, which indicates the higher selectivity of the formulation against cancer cells. In conclusion, loading the niosomes with Dox and coating them with HFB-1 enhanced their efficacy and selectivity toward cancer cells, presenting a promising drug delivery system for sustained drug release in cancer treatment.

Lyophilisation Improves Bioactivity and Stability of Insulin-Loaded Polymeric-Oligonucleotide Nanoparticles for Diabetes Treatment

The oral bioavailability of therapeutic proteins is limited by the gastrointestinal barriers. Encapsulation of labile proteins into nanoparticles is a promising strategy. In order to improve the stability of nanoparticles, lyophilisation has been used to remove water molecules from the suspension. Although various cryoprotections were employed in the preparation of lyophilised nanoparticles, the selection of cryoprotectant type and concentration in majority of the developed formulation was not justified. In this study, nanoparticles were fabricated by cationic chitosan and anionic Dz13Scr using complex coacervation. The effect of cryoprotectant types (mannitol, sorbitol, sucrose and trehalose) and their concentrations (1, 3, 5, 7, 10% w/v) on physiochemical properties of nanoparticles were measured. Cellular assays were performed to investigate the impact of selected cryoprotectant on cytotoxicity, glucose consumption, oral absorption mechanism and gastrointestinal permeability. The obtained results revealed that mannitol (7% w/v) could produce nanoparticles with small size (313.2 nm), slight positive charge and uniform size distribution. The addition of cryoprotectant could preserve the bioactivity of entrapped insulin and improve the stability of nanoparticles against mechanical stress during lyophilisation. The gastrointestinal absorption of nanoparticles is associated with both endocytic and paracellular pathways. With the use of 7% mannitol, lyophilised nanoparticles induced a significant glucose uptake in C2C12 cells. This work illustrated the importance of appropriate cryoprotectant in conservation of particle physiochemical properties, structural integrity and bioactivity. An incompatible cryoprotectant and inappropriate concentration could lead to cake collapse and formation of heterogeneous particle size populations.

Effect of insulin-loaded trimethyl chitosan nanoparticles on genes expression in the hippocampus of diabetic rats

Background Diabetes mellitus is a chronic metabolic disorder that undesirably affects both central and peripheral nervous systems through the apoptosis of neurons. Insulin and insulin-like growth factors (IGFs) inhibit apoptosis of oligodendrocytes. The objective of this study was to determine whether oral insulin in the form of nanoparticles may have similar effects to injectable insulin in increasing the gene expression of IGF1 and IGF2. Methods Insulin-loaded trimethyl chitosan nanoparticles were prepared using the polyelectrolyte complex method and characterized for size, polydispersity index, zeta potential, drug loading, and entrapment efficiency. An in vivo study was performed in different groups of male Wistar rats with diabetes mellitus type 1 treated with insulin-loaded trimethyl chitosan nanoparticles and subcutaneous injection of trade insulin (neutral protamine Hagedorn). The hippocampus of rats were studied for the expression of IGF1 and IGF2 genes by using real-time PCR, and the fold changes in gene expression were evaluated using the 2-ΔΔCt method. Results The expression of IGF1 and IGF2 genes in the groups treated with nano-insulin and injected insulin were significantly higher than that in the diabetic control group (p<0.001) and meaningfully lower than that in the healthy control group. However, there was no significant difference to the treated groups. Conclusion Our findings suggest that future research might provide a new formulation of drugs for treating type 1 diabetes, in the form of oral insulin.

Bio-nanotechnological advancement of orally administered insulin nanoparticles: Comprehensive review of experimental design for physicochemical characterization

Therapeutic proteins are labile macromolecules that are prone to degradation during production, freeze-drying and storage. Recent studies showed that nanoparticles can enhance the stability and oral bioavailability of encapsulated proteins. Several conventional approaches (enzyme inhibitors, mucoadhesive polymers) and novel strategies (surface modification, ligand conjugation, flash nano-complexation, stimuli-responsive drug delivery systems) have been employed to improve the physiochemical properties of nanoparticles such as size, zeta potential, morphology, polydispersity index, drug release kinetics and cell-targeting capacity. However, clinical translation of protein-based nanoparticle is limited due to poor experimental design, protocol non-compliance and instrumentation set-up that do not reflect the physiological conditions, resulting in difficulties in mass production of nanoparticles and waste in research funding. In order to address the above concerns, we conducted a comprehensive review to examine the experimental designs and conditions for physical characterization of protein-based nanoparticles. Reliable and robust characterization is essential to verify the cellular interactions and therapeutic potential of protein-based nanoparticles. Importantly, there are a number of crucial factors, which include sample treatment, analytical method, dispersants, sampling grid, staining, quantification parameters, temperature, drug concentration and research materials, should be taken into careful consideration. Variations in research protocol and unreasonable conditions that are used in optimization of pharmaceutical formulations can have great impact in result interpretation. Last but not least, we reviewed all novel instrumentations and assays that are available to examine mucus diffusion capacity, stability and bioactivity of protein-based nanoparticles. These include circular dichroism, fourier transform infrared spectroscopy, X-ray diffractogram, UV spectroscopy, differential scanning calorimetry, fluorescence spectrum, Förster resonance energy transfer, NMR spectroscopy, Raman spectroscopy, cellular assays and animal models.

Lawsone-loaded Niosome and its antitumor activity in MCF-7 breast Cancer cell line: a Nano-herbal treatment for Cancer

Phytochemicals like Lawsone have some drawbacks that stem from their poor solubility. Low solubility in aqueous mediums results in low bioavailability, poor permeability and instability of phytochemical compounds in biological environments. The aim of this study was to design nanoniosomes containing Lawsone (Law) using non-ionic surfactants and cholesterol. Niosomes were prepared by thin film hydration method (TFH). Then, they were loaded with Henna extract (HLaw) and standard Lawsone (SLaw), and two resulted formulations were compared. The henna extract was analyzed by mass gas chromatography. Size, zeta potential, polydispersity index (PDI) and morphology of the loaded formulations were evaluated by dynamic light scattering (DLS) and scanning electron spectroscopy (SEM). The incorporation and release rate of Law from niosome bilayers were evaluated by UV-Vis spectroscopy. In vitro experiments were carried out to evaluate antitumor activity in MCF-7 cell line. The results showed distinct spherical shapes and particle sizes were about 250 nm in diameter and have negative zeta potentials. Niosomes were stable at 4 °C for 2 months. Entrapment efficiently of both formulations was about 70% and showed a sustained release profile. In vitro study exhibited that using of niosome to encapsulating Law can significantly increase antitumor activity of formulation in MCF-7 cell line compared to Law solution (free Law). Thus, niosomes are a promising carrier system for delivery of phytochemical compounds that have poor solubility in biological fluids. Graphical abstract ᅟ.

Effect of insulin-coated trimethyl chitosan nanoparticles on IGF-1, IGF-2, and apoptosis in the hippocampus of diabetic male rats

BACKGROUND

Subcutaneous injection of insulin can lead to problems such as hypoglycemia and edema.

OBJECTIVE

The purpose of this research was to evaluate the effect of oral insulin-coated trimethyl chitosan nanoparticles on control of glycemic status, IGF-1 and IGF-2 levels, and apoptosis in the hippocampus of rats with diabetes mellitus.

METHODS

Insulin-coated trimethyl chitosan nanoparticles were prepared by the polyelectrolyte complex method (PEC) method. Insulin loading content, loading efficiency, quantity and quality of particle size were evaluated. In vivo study was performed in different treatment groups of male Wistar rats with diabetes mellitus by insulin-coated trimethyl chitosan nanoparticles or subcutaneous injection of trade insulin. The duration of diabetes was eight weeks and the treatment was started after that time and continued for another two weeks. Body weight, fasting blood glucose (FBS), hippocampal apoptosis, and immunohistochemical (IHC) protein levels of IGF-1 and IGF-2 were assessed at the end of the experiments.

RESULTS

The size and polydispersity indexes were 533 nanometers and 0.533, respectively. Insulin coated trimethyl chitosan nanoparticles showed high loading efficiency (97.67% ) and loading content (48.83% ). The spherical shape of nanoparticle was confirmed by transmission electron microscopic (TEM). The amine, amide, ether and aliphatic groups were evaluated using FT-IR spectrophotometer which represented the correctness of the insulin coated trimethyl chitosan nanoparticles. Although the apoptotic index was not changed either by insulin-coated nano-particles or commercial insulin, in vivo results showed the efficacy of insulin-coated nanoparticles as well as commercial insulin in compensated weight loss, FBS and protein levels of IGF-1 and IGF-2.

CONCLUSIONS

The present study showed the efficacy of insulin coated nanoparticle in oral route manner that can be tested in Phase I- III clinical trials. However, a behavioral study could reveal the efficacy of insulin-loaded nanoparticles in the improvement of cognitive changes through the modulation of IGF-1 and IGF-2 levels in the hippocampus.

Nanoparticles Prepared From N,N-Dimethyl-N-Octyl Chitosan as the Novel Approach for Oral Delivery of Insulin: Preparation, Statistical Optimization and In-vitro Characterization

In this study, N,N-Dimethyl-N-Octyl chitosan was synthesized. Nanoparticles containing insulin were prepared using PEC method and were statistically optimized using the Box-Behnken response surface methodology. The independent factors were considered to be the insulin concentration, concentration and pH of the polymer solution, while the dependent factors were characterized as the size, zeta potential, PdI and entrapment efficiency. The optimized nanoparticles were morphologically studied using SEM. The cytotoxicity of the nanoparticles on the Caco-2 cell culture was studied using the MTT cytotoxicity assay method, while the permeation of the insulin nanoparticles across the Caco-2 cell monolayer was also determined. The optimized nanoparticles posed appropriate physicochemical properties. The SEM morphological studies showed spherical to sub-spherical nanoparticles with no sign of aggregation. The in-vitro release study showed that 95.5 ± 1.40% of the loaded insulin was released in 400 min. The permeability studies revealed significant enhancement in the insulin permeability using nanoparticles prepared from octyl chitosan at 240 min (11.3 ± 0.78%). The obtained data revealed that insulin nanoparticles prepared from N,N-Dimethyl-N-Octyl chitosan can be considered as the good candidate for oral delivery of insulin compared to nanoparticles prepared from N,N,N-trimethyl chitosan.

In-vitro and in-vivo cytotoxicity and efficacy evaluation of novel glycyl-glycine and alanyl-alanine conjugates of chitosan and trimethyl chitosan nano-particles as carriers for oral insulin delivery

PURPOSE

The aim of this research work was to explore the possibility of providing multifunctional oral insulin delivery system by conjugating several types of dipeptides on chitosan and trimethyl chitosan to be used as drug carriers.

METHOD

Conjugates of Glycyl-glycine and alanyl-alanine of chitosan and trimethyl chitosan (on primary alcohol group of polymer located on carbon 6) were synthesized and nanoparticles containing insulin were prepared for oral delivery. Preparation conditions of nanoparticles were optimized and their performance to enhance the permeability of insulin as well as cytotoxicity of nanoparticles in Caco-2 cell line was evaluated. To evaluate the efficacy of orally administered nanoparticles, nanoparticles with the most permeability enhancing ability were studied in male Wistar rats as animal model by measuring insulin and glucose Serum levels.

RESULT

Structural study of all the conjugates by infrared spectroscopy and nuclear magnetic resonance confirmed the successful formation of the conjugates with the desirable substitution degree. By optimizing preparation conditions, nanoparticles with expected size (157.3-197.7 nm), Zeta potential (24.35-34.37 mV), polydispersity index (0.365-0.512), entrapment efficiency (70.60-86.52%) and loading capacity (30.92-56.81%), proper morphology and desirable release pattern were obtained. Glycyl-glycine and alanyl-alanine conjugate nanoparticles of trimethyl chitosan showed 2.5-3.3 folds more effective insulin permeability in Caco-2 cell line than their chitosan counterparts. In animal model, oral administration of glycyl-glycine and alanyl-alanine conjugate nanoparticles of trimethyl chitosan demonstrated reasonable increase in Serum insulin level with relative bioavailability of 17.19% and 15.46% for glycyl-glycine and alanyl-alanine conjugate nanoparticles, respectively, and reduction in Serum glucose level compared with trimethyl chitosan nanoparticles (p < 0.05).

CONCLUSION

It seems that glycyl-glycine and alanyl-alanine conjugate nanoparticles of trimethyl chitosan have met the aim of this research work and have been able to orally deliver insulin with more than one mechanism in animal model. Hence, they are promising candidates for further research studies.

Can natural polymers assist in delivering insulin orally?

Diabetes mellitus is one of the most grave and lethal non communicable diseases. Insulin is normally used to medicate diabetes. Due to bioavailability issues, the most regular route of administration is through injection, which may pose compliance problems to treatment. The oral administration thus appears as a suitable alternative, but with several important problems. Low stability of insulin in the gastrointestinal tract and low intestinal permeation are some of the issues. Encapsulation of insulin into polymer-based particles emerges as a plausible strategy. Different encapsulation approaches and polymers have been used in this regard. Polymers with different characteristics from natural or synthetic origin have been assessed to attain this goal, with natural polymers being preferable. Natural polymers studied so far include chitosan, alginate, carrageenan, starch, pectin, casein, tragacanth, dextran, carrageenan, gelatine and cyclodextrin. While some promising knowledge and results have been gained, a polymeric-based particle system to deliver insulin orally has not been introduced onto the market yet. In this review, effectiveness of different natural polymer materials developed so far along with fabrication techniques are evaluated.

Thiolated methylated dimethylaminobenzyl chitosan: A novel chitosan derivative as a potential delivery vehicle

Chitosan is a natural mucoadhesive, biodegradable, biocompatible and nontoxic polymer which has been used in pharmaceutical industry for a lot of purposes such as dissolution enhancing, absorption enhancing, sustained releasing and protein, gene or drug delivery. Two major disadvantages of chitosan are poor solubility in physiological pH and low efficiency for protein and gene delivery. In this study thiolated methylated N-(4-N,N-dimethylaminobenzyl) chitosan was prepared for the first time in order to improve the solubility and delivery properties of chitosan. This novel chitosan derivative was characterized using ¹H NMR, Ellman test, TGA and Zetasizer. Cell toxicity studies were performed on Human Embryonic Kidney 293 (Hek293) cell line using XTT method, to investigate the potential effect of this new derivative on cell viability. ¹H NMR results showed that all substitution reactions were successfully carried out. Zeta potential of new derivative at acidic and physiological pHs was greater than chitosan and it revealed an increase in solubility of the derivative. Furthermore, it had no significant cytotoxicity against Hek293 cell line in comparison to chitosan. These findings confirm that this new derivative can be introduced as a suitable compound for biomedical purposes.

Preparation and characterization of nanoparticles composed of methylated N-(4-N,N-dimethyl aminobenzyl) chitosan for oral delivery of cyclosporine A

Cyclosporine is considered a highly lypophilic compound meaning low bioavailability through oral administration. In this study, cyclosporine was entrapped in a novel aromatic, quaternized derivative of chitosan (i.e. methylated N-(4-N,N-dimethyl aminobenzyl) chitosan) in order to improve solubility and bioavailability. Methylated N-(4,N,N-dimethyl aminobenzyl) chitosan was synthesized by the Schiff base reaction method. Polymeric nanoparticles containing cyclosporine was prepared and the physico-chemical properties of prepared nanoparticles were determined. The nanoparticles were studied morphologically using transmission electron microscopy (TEM). Finally, the release of cyclosporine from nanoparticles was studied in vitro using simulated intestinal fluid adjusted to pH of 6.8. For the preparation of nanoparticles, different formulations were studied and it was found that proper nanoparticles were prepared in equal concentration (1 mg/mL) of polymer and sodium tri-poly phosphate (TPP). The size, zeta potential, PdI, EE% and LE% of the prepared nanoparticles were reported as 173±36 nm, 23.1±4.18 mV, 0.243±0.05, 97.1±4.38% and 3.2±0.21%, respectively. The TEM images of nanoparticles revealed spherical to sub-spherical nanoparticles with no sign of agglomeration. This study suggests that preparations of nanoparticles composed of methylated N-(4,N,N-dimethyl aminobenzyl) chitosan can be a good candidate for improving the oral bioavailability of cyclosporine.

An integrated process for microalgae harvesting and cell disruption by the use of ferric ions

In this study, a simultaneous process of harvesting biomass and extracting crude bio-oil was attempted from wet microalgae biomass using FeCl3 and Fe2(SO4)3 as both coagulant and cell-disrupting agent. A culture solution of Chlorella sp. KR-1 was firstly concentrated to 20 g/L and then proceeded for cell disruption with the addition of H2O2. Optimal dosage were 560 and 1060 mg/L for FeCl3 and Fe2(SO4)3, showing harvesting efficiencies of more than 99%. Optimal extraction conditions were identified via the response surface method (RSM), and the extraction yield was almost the same at 120 °C for both iron salts but FAME compositions after transesterification was found to be quite different. Given iron salts were a reference coagulant in water treatment in general and microalgae harvesting in particular, the present approach of using it for harvesting and oil-extraction in a simultaneous manner can serve as a practical route for the microalgae-derived biodiesel production.

Development of acid-resistant alginate/trimethyl chitosan nanoparticles containing cationic β-cyclodextrin polymers for insulin oral delivery

In this study, the use of trimethylchitosan (TMC), by higher solubility in comparison with chitosan, in alginate/chitosan nanoparticles containing cationic β-cyclodextrin polymers (CPβCDs) has been studied, with the aim of increasing insulin uptake by nanoparticles. Firstly, TMCs were synthesized by iodomethane, and CPβCDs were synthesized within a one-step polycondensation reaction using choline chloride (CC) and epichlorohydrine (EP). Insulin-CβCDPs complex was prepared by mixing 1:1 portion of insulin and CPβCDs solutions. Then, nanoparticles prepared in a three-step procedure based on the iono-tropic pregelation method. Nanoparticles screened using experimental design and Placket Burman methodology to obtain minimum size and polydispercity index (pdI) and the highest entrapment efficiency (EE). CPβCDs and TMC solution concentration and pH and alginate and calcium chloride solution concentrations are found as the significant parameters on size, PdI, and EE. The nanoparticles with proper physicochemical properties were obtained; the size, PdI, and EE% of optimized nanoparticles were reported as 150.82 ± 21 nm, 0.362 ± 0.036, and 93.2% ± 4.1, respectively. The cumulative insulin release in intestinal condition achieved was 50.2% during 6 h. By SEM imaging, separate, spherical, and nonaggregated nanoparticles were found. In the cytotoxicity studies on Caco-2 cell culture, no significant cytotoxicity was observed in 5 h of incubation, but after 24 h of incubation, viability was decreased to 50% in 0.5 mμ of TMC concentration. Permeability studies across Caco-2 cells had been carried out, and permeability achieved in 240 min was 8.41 ± 0.39%, which shows noticeable increase in comparison with chitosan nanoparticles. Thus, according to the results, the optimized nanoparticles can be used as a new insulin oral delivery system.

Improved oral therapeutic potential of nanoencapsulated cryptdin formulation against Salmonella infection

An encapsulated system for cryptdin-2 (a Paneth cell antimicrobial peptide) was developed, with a view to help it sustain adverse gut conditions and to ensure its bioavailability on oral administration. The formulation was characterized on the basis of particle size, zeta potential and polydispersity index. Cryptdin-2 loaded nanoparticles of size 105±7 nm, formulated by ionotropic gelation method using chitosan: tripolyphosphate (5:2), revealed 60% drug entrapment efficiency with 65% in vitro release in 4.5 h. Developed system was evaluated for its therapeutic application against Salmonella Typhimurium infection in mice, on the basis of survivability of animals, bacterial load in tissues, histo-architecture and oxidative damage markers. Infected mice when treated with the encapsulated peptide showed 83% survivability and approximately 2 log unit reductions in the bacterial load in the tissues versus 100% mortality observed with the free peptide. The encapsulated cryptdin-2 also achieved a decrease in the level of oxidants, particularly nitrite by 3.25 folds and increased the level of antioxidant catalase by 2 folds when compared to the levels exhibited by the free peptide. The bacteriological and biochemical alterations illustrated by encapsulated peptide co-related well with the histo-architectural studies. The study is a first pre-clinical report on the oral effectiveness of cryptdin-2 by its suitable encapsulation and has potential for future clinical applications.

Preparation and optimization of N-trimethyl-O-carboxymethyl chitosan nanoparticles for delivery of low-molecular-weight heparin

The aim of this study was preparation, optimization and in vitro characterization of nanoparticles composed of 6-[O-carboxymethyl]-[N,N,N-trimethyl] (TMCMC) for oral delivery of low-molecular-weight heparin. The chitosan derivative was synthesized. Nanoparticles were prepared using the polyelectrolyte complexation method. Box-Behnken response surface experimental design methodology was used for optimization of nanoparticles. The morphology of nanoparticles was studied using transmission electron microscopy. In vitro release of enoxaparin from nanoparticles was determined under simulated intestinal fluid. The cytotoxicity of nanoparticles on a Caco-2 cell line was determined, and finally the transport of prepared nanoparticles across Caco-2 cell monolayer was defined. Optimized nanoparticles with proper physico-chemical properties were obtained. The size, zeta potential, poly-dispersity index, entrapment efficiency and loading efficiency of nanoparticles were reported as 235 ± 24.3 nm, +18.6 ± 2.57 mV, 0.230 ± 0.03, 76.4 ± 5.43% and 12.6 ± 1.37%, respectively. Morphological studies revealed spherical nanoparticles with no sign of aggregation. In vitro release studies demonstrated that 93.6 ± 1.17% of enoxaparin released from nanoparticles after 600 min of incubation. MTT cell cytotoxicity studies showed no cytotoxicity at 3 h post-incubation, while the study demonstrated concentration-dependent cytotoxicity after 24 h of exposure. The obtained data had shown that the nanoparticles prepared from trimethylcarboxymethyl chitosan may be considered as a good candidate for oral delivery of enoxaparin.

Drug delivery systems, CNS protection, and the blood brain barrier

Present review highlights various drug delivery systems used for delivery of pharmaceutical agents mainly antibiotics, antineoplastic agents, neuropeptides, and other therapeutic substances through the endothelial capillaries (BBB) for CNS therapeutics. In addition, the use of ultrasound in delivery of therapeutic agents/biomolecules such as proline rich peptides, prodrugs, radiopharmaceuticals, proteins, immunoglobulins, and chimeric peptides to the target sites in deep tissue locations inside tumor sites of brain has been explained. In addition, therapeutic applications of various types of nanoparticles such as chitosan based nanomers, dendrimers, carbon nanotubes, niosomes, beta cyclodextrin carriers, cholesterol mediated cationic solid lipid nanoparticles, colloidal drug carriers, liposomes, and micelles have been discussed with their recent advancements. Emphasis has been given on the need of physiological and therapeutic optimization of existing drug delivery methods and their carriers to deliver therapeutic amount of drug into the brain for treatment of various neurological diseases and disorders. Further, strong recommendations are being made to develop nanosized drug carriers/vehicles and noninvasive therapeutic alternatives of conventional methods for better therapeutics of CNS related diseases. Hence, there is an urgent need to design nontoxic biocompatible drugs and develop noninvasive delivery methods to check posttreatment clinical fatalities in neuropatients which occur due to existing highly toxic invasive drugs and treatment methods.

The protective effect of albumin on bevacizumab activity and stability in PLGA nanoparticles intended for retinal and choroidal neovascularization treatments

The rapidly growing applications of antibody-based therapeutics requires novel approaches to develop efficient drug delivery systems in which biodegradable polymeric nanoparticles are amongst the best candidates. In the present study bevacizumab loaded PLGA nanoparticles were formulated by water-in-oil-in-water emulsion method. Protein inactivation and aggregation are the major drawbacks of this technique. Therefore protective ability of various stabilizers was studied during entrapment process. Probable changes in VEGF₁₆₅ binding capability of bevacizumab was assayed by ELISA which portrays the antibody's bio-efficiency. Probable breakage of bevacizumab and its secondary and tertiary structural integrity upon entrapment were analyzed by SDS-PAGE and circular dichroism spectroscopy, respectively. In vitro and ex vivo released bevacizumab from the prepared nanoparticles was also investigated. Results revealed that the protein interfacial adsorption is the foremost destabilizing factor in the double emulsion method and incorporation of appropriate concentrations of albumin could protect bevacizumab against entrapment stress. Ex vivo release results, in rabbit vitreous, indicated the ability of prepared nanoparticles in prolonged release of the active antibody. Consequently this approach was an attempt to achieve sustained release PLGA nanoparticle formulation with the aim of protecting integrity and performance of entrapped bevacizumab.

Is dialysis a reliable method for studying drug release from nanoparticulate systems?-A case study

The kinetics of in vitro drug release from nanoparticulate systems is extensive, though uncritically, being studied by dialysis. Evaluating the actual relevance of dialysis data to drug release was the purpose of this study. Diclofenac- or ofloxacin-loaded chitosan nanoparticles crosslinked with tripolyphosphate were prepared and characterized. With each drug, dynamic dialysis was applied to nanoparticle dispersion, solution containing dissolved chitosan·HCl, and solution of plain drug. Drug kinetics in receiving phase (KRP), nanoparticle matrix (KNM) and nanoparticle dispersion medium (KDM) were determined. Release of each drug from nanoparticles was also assessed by ultracentrifugation. Although KRP data may be interpreted in terms of sustained release from nanoparticles, KNM and KDM data show that, with both drugs, the process was in fact controlled by permeation across dialysis membrane. Analysis of KRP data reveals a reversible interaction of diclofenac with dispersed nanoparticle surface, similar to the interaction of this drug with dissolved chitosan·HCl. No such interactions are noticed with ofloxacin. The results from the ultracentrifugation method agree with the above interpretation of dialysis data. This case study shows that dialysis data from a nanoparticle dispersion is not necessarily descriptive of sustained-release from nanoparticles, hence, if interpreted uncritically, it may be misleading.