The Inclusion of Chitosan in Poly-ε-caprolactone Nanoparticles: Impact on the Delivery System Characteristics and on the Adsorbed Ovalbumin Secondary Structure

Ruxolitinib-loaded poly-ɛ-caprolactone (PCL) nanoparticles inhibit JAK2/STAT5 signaling in BT474 breast cancer cells by downregulating Bcl-2 and Mcl-1

BACKGROUND

JAK/STAT signaling plays an important role in regulating cell proliferation. Reducing proliferation and inducing cell death with gene-specific inhibitors such as ruxolitinib, Receptor tyrosine kinases (RTK) inhibitor targeting JAK1/2, are therapeutic approaches. The use of nanoparticles can reduce the toxicity and side effects of drugs, as they act directly on cancer cells and can selectively increase drug accumulation in tumor cells. Poly-ɛ-caprolactone (PCL) is a polymer that is frequently used in drug development. In this study, Rux-PCL-NPs were synthesized to increase the effectiveness of ruxolitinib. In addition, this study aimed to determine the effect of Rux-PCL-NPs on JAK/STAT signaling and apoptotic cell death.

METHODS AND RESULTS

Rux-PCL-NPs were synthesized by nanoprecipitation. The Rux-PCL-NPs had a spherical and mean particle size of 219 ± 88.66 nm and a zeta potential of 0.471 ± 0.453 mV. In vitro cytotoxicity and antiproliferative effects were determined by MTT and soft agar colony formation assays, respectively. The effects of ruxolitinib, PCL-NPs, and Rux-PCL-NPs on apoptosis and the JAK/STAT pathway in cells were examined by western blot analysis. PCL-NPs did not have a toxic effect on the cells. The IC50 value of Rux-PCL-NPs was decreased 50-fold compared to that of ruxolitinib. Rux-PCL-NPs promoted cell death by downregulating JAK2 and STAT5, thereby inhibiting the JAK/STAT pathway.

CONCLUSIONS

Our results revealed that Rux-PCL-NPs, which increased the efficacy of ruxolitinib, regulated apoptosis and the JAK2/STAT5 pathway.

Advances in chitosan-based blends as potential drug delivery systems: A review

During the last decades, the ever-increasing incidence of diseases has led to high rates of mortality throughout the world. On the other hand, the inability and deficiencies of conventional approaches (such as chemotherapy) in the suppression of diseases remain challenging issues. As a result, there is a fundamental requirement to develop novel, biocompatible, bioavailable, and practical nanomaterials to prevent the incidence and mortality of diseases. Chitosan (CS) derivatives and their blends are outstandingly employed as promising drug delivery systems for disease therapy. These biopolymers are indicated more efficient performance against diseases compared with conventional modalities. The CS blends possess improved physicochemical properties, ease of preparation, high affordability, etc. characteristics compared with other biopolymers and even pure CS which result in efficient thermal, mechanical, biochemical, and biomedical features. Also, these blends can be administrated through different routes without a long-term treatment period. Due to the mentioned properties, numerous formulations of CS blends are developed for pharmaceutical sciences to treat diseases. This review article highlights the progressions in the development of CS-based blends as potential drug delivery systems against diseases.

Engineering nano-cellulose bio-composites to improve protein delivery for oral vaccination

Oral vaccine is a non-invasive, ideal way to protect communities from infectious diseases. Effective vaccine delivery systems are required to enhance vaccine absorption in the small intestine and its cellular uptake by immune cells. Here, we constructed alginate/chitosan-coated cellulose nanocrystal (Alg-Chi-CNC) and nanofibril (Alg-Chi-CNF) nanocomposites to enhance ovalbumin (OVA) delivery in the intestine. In vitro mucosal permeation and diffusion and cellular uptake demonstrated that Chi-CNC exhibited better cellular uptake in epithelial and antigen-presenting cells (APCs). In vivo results revealed that alginate/chitosan-coated nanocellulose nanocomposites generated strong systemic and mucosal immune responses. Though the features of functional nano-cellulose composites affected mucus permeation and APC uptakes, in vivo specific-OVA immune responses have not shown significant differences due to the complexity of the small intestine.

Chitosan-Based Polymer Blends for Drug Delivery Systems

Polymers have been widely used for the development of drug delivery systems accommodating the regulated release of therapeutic agents in consistent doses over a long period, cyclic dosing, and the adjustable release of both hydrophobic and hydrophilic drugs. Nowadays, polymer blends are increasingly employed in drug development as they generate more promising results when compared to those of homopolymers. This review article describes the recent research efforts focusing on the utilization of chitosan blends with other polymers in an attempt to enhance the properties of chitosan. Furthermore, the various applications of chitosan blends in drug delivery are thoroughly discussed herein. The literature from the past ten years was collected using various search engines such as ScienceDirect, J-Gate, Google Scholar, PubMed, and research data were compiled according to the various novel carrier systems. Nanocarriers made from chitosan and chitosan derivatives have a positive surface charge, which allows for control of the rate, duration, and location of drug release in the body, and can increase the safety and efficacy of the delivery system. Recently developed nanocarriers using chitosan blends have been shown to be cost-effective, more efficacious, and prolonged release carriers that can be incorporated into suitable dosage forms.

Virus-Like Particle-Templated Silica-Adjuvanted Nanovaccines with Enhanced Humoral and Cellular Immunity

Virus-like particles (VLPs) are self-assembled viral proteins that represent a superior form of antigens in vaccine formulations. To enhance immunogenicity, adjuvants, especially the aluminum salts (Alum), are essentially formulated in VLP vaccines. However, Alum only induce biased humoral immune responses that limits further applications of VLP-based vaccines. To stimulate more balanced immunity, we, herein, develop a one-step strategy of using VLPs as the biotemplates to synthesize raspberry-like silica-adjuvanted VLP@Silica nanovaccines. Hepatitis B surface antigen (HBsAg) VLPs and human papillomavirus type 18 (HPV 18) VLPs are selected as model templates. Circular dichroism (CD) and affinity analyses demonstrate that HBsAg VLPs in the nanovaccines maintain their secondary structure and immunogenicity, respectively. VLP@Silica promote silica dissolution-induced lysosomal escape and cytosolic delivery of antigens, and enhance the secretion of both Th1 and Th2 type cytokines in murine bone marrow-derived dendritic cells (BMDCs). Additionally, they could improve antigen trafficking and mediate DC activation in draining lymph nodes (DLNs). Vaccination study demonstrate that both HBsAg VLP@Silica and HPV 18 VLP@Silica nanovaccines induce enhanced antigen-specific antibody productions and T-cell mediated adaptive immune responses. This design strategy can utilize VLPs derived from a diversity of viruses or their variants as templates to construct both prophylactic and therapeutic vaccines with improved immunogenicity.

Engineering the hydroxyl content on aluminum oxyhydroxide nanorod for elucidating the antigen adsorption behavior

The interaction between the aluminum salt-based adjuvants and the antigen in the vaccine formulation is one of the determining factors affecting the immuno-potentiation effect of vaccines. However, it is not clear how the intrinsic properties of the adjuvants could affect this interaction, which limits to benefit the improvement of existing adjuvants and further formulation of new vaccines. Here, we engineered aluminum oxyhydroxide (AlOOH) nanorods and used a variety of antigens including hepatitis B surface antigen (HBsAg), SARS-CoV-2 spike protein receptor-binding domain (RBD), bovine serum albumin (BSA) and ovalbumin (OVA) to identify the key physicochemical properties of adjuvant that determine the antigen adsorption at the nano-bio interface between selected antigen and AlOOH nanorod adjuvant. By using various physicochemical and biophysical characterization methods, it was demonstrated that the surface hydroxyl contents of AlOOH nanorods affected the adsorptive strength of the antigen and their specific surface area determined the adsorptive capacity of the antigen. In addition, surface hydroxyl contents had an impact on the stability of the adsorbed antigen. By engineering the key intrinsic characteristics of aluminum-based adjuvants, the antigen adsorption behavior with the aluminum adjuvant could be regulated. This will facilitate the design of vaccine formulations to optimize the adsorption and stability of the antigen in vaccine.

Unravelling the Immunotoxicity of Polycaprolactone Nanoparticles-Effects of Polymer Molecular Weight, Hydrolysis, and Blends

Poly-ε-caprolactone (PCL) is a biodegradable polyester that has FDA and CE approval as a medical device. Nonetheless, the lack of toxicity exhibited by the polymer cannot be extrapolated to its nanomaterial conformation. Despite PCL-based NPs being widely studied in the biomedical field for their advantages as controlled drug delivery systems, little data describe PCL NPs' toxicity, particularly immunotoxicity. This work assessed different PCL-based delivery systems intended for protein delivery regarding their immunotoxicity and hemocompatibility. Two different molecular weight PCL polymers were used, as well as blends with chitosan and glucan. Results showed that the presence of NaOH during the production of PCL₂ NPs and PCL₂/glucan NPs induced PCL alkali hydrolysis, generating more reactive groups (carboxyl and hydroxyl) that contributed to an increased toxicity of the NPs (higher reduction in peripheral blood mononuclear cell viability and lower hemocompatibility). PCL₂/glucan NPs showed an anti-inflammatory activity characterized by the inhibition of LPS stimulated nitric oxide (NO) and TNF-α. In conclusion, generalizations among different PCL NP delivery systems must be avoided, and immunotoxicity assessments should be performed in the early stage of product development to increase the clinical success of the nanomedicine.

Burgeoning Polymer Nano Blends for Improved Controlled Drug Release: A Review

With continual rapid developments in the biomedical field and understanding of the important mechanisms and pharmacokinetics of biological molecules, controlled drug delivery systems (CDDSs) have been at the forefront over conventional drug delivery systems. Over the past several years, scientists have placed boundless energy and time into exploiting a wide variety of excipients, particularly diverse polymers, both natural and synthetic. More recently, the development of nano polymer blends has achieved noteworthy attention due to their amazing properties, such as biocompatibility, biodegradability and more importantly, their pivotal role in controlled and sustained drug release in vitro and in vivo. These compounds come with a number of effective benefits for improving problems of targeted or controlled drug and gene delivery systems; thus, they have been extensively used in medical and pharmaceutical applications. Additionally, they are quite attractive for wound dressings, textiles, tissue engineering, and biomedical prostheses. In this sense, some important and workable natural polymers (namely, chitosan (CS), starch and cellulose) and some applicable synthetic ones (such as poly-lactic-co-glycolic acid (PLGA), poly(lactic acid) (PLA) and poly-glycolic acid (PGA)) have played an indispensable role over the last two decades for their therapeutic effects owing to their appealing and renewable biological properties. According to our data, this is the first review article highlighting CDDSs composed of diverse natural and synthetic nano biopolymers, blended for biological purposes, mostly over the past five years; other reviews have just briefly mentioned the use of such blended polymers. We, additionally, try to make comparisons between various nano blending systems in terms of improved sustained and controlled drug release behavior.

A strategy for high radioprotective activity via the assembly of the PprI protein with a ROS-sensitive polymeric carrier

A strategy is developed for highly effective radioprotection with the PprI protein using a ROS-sensitive polymeric carrier.

Adjuvant Activity of Poly-ε-caprolactone/Chitosan Nanoparticles Characterized by Mast Cell Activation and IFN-γ and IL-17 Production

Polymeric nanoparticles (NPs) are extremely attractive vaccine adjuvants, able to promote antigen delivery and in some instances, exert intrinsic immunostimulatory properties that enhance antigen specific humoral and cellular immune responses. The poly-ε-caprolactone (PCL)/chitosan NPs were designed with the aim of being able to combine the properties of the 2 polymers in the preparation of an adjuvant for the hepatitis B surface antigen (HBsAg). This article reports important results of an in vitro mechanistic study and immunization studies with HBsAg associated with different concentrations of the nanoparticles. The results revealed that PCL/chitosan NPs promoted mast cell (MC) activation (β-hexosaminidase release) and that its adjuvant effect is not mediated by the TNF-α secretion. Moreover, we demonstrated that HBsAg loaded PCL/chitosan NPs, administered through the subcutaneous (SC) route, were able to induce higher specific antibody titers without increasing IgE when compared to a commercial vaccine, and that the IgG titers are nanoparticle-dose dependent. The results also revealed the NPs' capability to promote a cellular immune response against HBsAg, characterized by the production of IFN-γ and IL-17. These results demonstrated that PCL/chitosan NPs are a good hepatitis B antigen adjuvant, with direct influence on the intensity and type of the immune response generated.