Hierarchical Mg/Al hydrotalcite oxide hollow microspheres with excellent adsorption capability towards Congo red

A novel citrate anion-intercalated Mg/Al layered double hydroxide (CA-LDH) is synthesized via a one-step hydrothermal process. The synthesized CA-LDH is a hollow flower-like microsphere composed of thin nanoflakes (10 nm in thickness). After calcination, the formed Mg/Al layered double oxide (CA-LDO) hollow microspheres possess a high specific surface area of 247.8 m2 g-1 and a high pore volume of 0.97 cm3 g-1, which endow them with excellent adsorption ability towards Congo red (CR). The maximum adsorption capacity of CR onto CA-LDO can reach up to 1883 mg g-1. The significantly improved adsorption capacity of CA-LDO can be attributed to its unique structures of hierarchical hollow microspheres, in which the hierarchical porous shell layer provides enough adsorption sites to anchor the dye molecules, and the hollow core can preserve the absorbed dye. This study provides a promising novel adsorbent which can be used for efficient water remediation.

Biowaste-Derived, Highly Efficient, Reusable Carbon Nanospheres for Speedy Removal of Organic Dyes from Aqueous Solutions

The current work explores the adsorptive efficiency of carbon nanospheres (CNSs) derived from oil palm leaves (OPL) that are a source of biowaste. CNSs were synthesized at 400, 600, 800 and 1000 °C, and those obtained at 1000 °C demonstrated maximum removal efficiency of ~91% for malachite green (MG). Physicochemical and microscopic characteristics were analysed by FESEM, TEM, FTIR, Raman, TGA and XPS studies. The presence of surface oxygen sites and the porosity of CNSs synergistically influenced the speed of removal of MG, brilliant green (BG) and Congo red (CR) dyes. With a minimal adsorbent dosage (1 mg) and minimum contact time (10 min), and under different pH conditions, adsorption was efficient and cost-effective (nearly 99, 91 and 88% for BG, MG and CR, respectively). The maximum adsorption capacities of OPL-based CNSs for BG were 500 and 104.16 mg/g for MG and 25.77 mg/g for CR. Adsorption isotherms (Freundlich, Langmuir and Temkin) and kinetics models (pseudo-first-order, pseudo-second-order and Elovich) for the adsorption processes of all three dyes on the CNSs were explored in detail. BG and CR adsorption the Freundlich isotherm best, while MG showed a best fit to the Temkin model. Adsorption kinetics of all three dyes followed a pseudo-second-order model. A reusability study was conducted to evaluate the effectiveness of CNSs in removing the MG dye and showed ~92% efficiency even after several cycles. Highly efficient CNSs with surface oxygen groups and speedy removal of organic dyes within 10 min by CNSs are highlighted in this paper.

Upcycling Glass Waste into Porous Microspheres for Wastewater Treatment Applications: Efficacy of Dye Removal

Each year about 7.6 million tons of waste glasses are landfilled without recycling, reclaiming or upcycling. Herein we have developed a solvent free upcycling method for recycled glass waste (RG) by remanufacturing it into porous recycled glass microspheres (PRGMs) with a view to explore removal of organic pollutants such as organic dyes. PRGMs were prepared via flame spheroidisation process and characterised using Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and Mercury Intrusion Porosimetry (MIP) analysis. PRGMs exhibited 69% porosity with overall pore volume and pore area of 0.84 cm³/g and 8.6 cm²/g, respectively (from MIP) and a surface area of 8 m²/g. Acid red 88 (AR88) and Methylene blue (MB) were explored as a model source of pollutants. Results showed that removal of AR88 and MB by PRGMs was influenced by pH of the dye solution, PRGMs doses, and dye concentrations. From the batch process experiments, adsorption and coagulation processes were observed for AR88 dye whilst MB dye removal was attributed only to adsorption process. The maximum monolayer adsorption capacity (q_e) recorded for AR88, and MB were 78 mg/g and 20 mg/g, respectively. XPS and FTIR studies further confirmed that the adsorption process was due to electrostatic interaction and hydrogen bond formation. Furthermore, dye removal capacity of the PRGMs was also investigated for column adsorption process experiments. Based on the Thomas model, the calculated adsorption capacities at flow rates of 2.2 mL/min and 0.5 mL/min were 250 mg/g and 231 mg/g, respectively which were much higher than the batch scale Langmuir monolayer adsorption capacity (q_e) values. It is suggested that a synergistic effect of adsorption/coagulation followed by filtration processes was responsible for the higher adsorption capacities observed from the column adsorption studies. This study also demonstrated that PRGMs produced from recycled glass waste could directly be applied to the next cyclic experiment with similar dye removal capability. Thus, highlighting the circular economy scope of using waste inorganic materials for alternate applications such as pre-screening materials in wastewater treatment applications.

Fabrication of chitin monoliths with controllable morphology by thermally induced phase separation of chemically modified chitin

As a natural polymer, chitin has excellent biological properties such as biodegradability and immunological, antibacterial, and wound-healing activities and has numerous applications in cosmetics, drug delivery, and pharmaceuticals. Organic polymer monoliths have also drawn significant attention, owing to their high permeability, large surface area, and high mechanical strength. They are usually applied to separation, ion exchange, catalysis, and chromatography. We have previously prepared cellulose monoliths using biopolymers; however, because chitin possesses amide groups on its side chain, it is superior to cellulose for further chemical modification and applications. However, the utilization of chitin is restricted by its insolubility in water and common organic solvents. In this study, for the first time, a monolith was prepared by chemical modification of chitin using a thermally induced phase separation (TIPS) method. First, we prepared dibutyrylchitin (DBC) as a starting polymer that is soluble in organic solvents. To prepare the monolith, DBC was dissolved completely in dimethyl sulfoxide (DMSO) while heating, and deionized water was added to the solution. It was then cooled at 20 °C to form a monolith via phase separation. The porous morphology of the DBC monolith was altered by regulating the DBC concentration, DMSO/H₂O ratio, and aging temperature. The DBC monolith was converted to a chitin monolith by the alkaline hydrolysis of butyryl ester. The successful hydrolysis of butyryl ester was confirmed by the disappearance of the peak at 1735 cm^-1 in the FT-IR spectra, which is related to the ester moiety of DBC. The chitin monolith has the potential to be utilized under water flow for catalysis, metal capture from wastewater, dye sorption, and drug delivery systems.

Sustainable Development of Magnetic Chitosan Core-Shell Network for the Removal of Organic Dyes from Aqueous Solutions

The wide use of alizarin red S (ARS), a typical anthraquinone dye, has led to its continued accumulation in the aquatic environment, which causes mutagenic and carcinogenic effects on organisms. Therefore, this study focused on the removal of ARS dye by adsorption onto a magnetic chitosan core-shell network (MCN). The successful synthesis of the MCN was confirmed by ATR-FTIR, SEM, and EDX analysis. The influence of several parameters on the removal of ARS dye by the MCN revealed that the adsorption process reached equilibrium after 60 min, pH played a major role, and electrostatic interactions dominated for the ARS dye removal under acidic conditions. The adsorption data were described well by the Langmuir isotherm and a pseudo-second order kinetic model. In addition to the preferable adsorption of hydrophobic dissolved organic matter (DOM) fractions onto the MCN, the electrostatic repulsive forces between the previously adsorbed DOM onto MCN and ARS dye resulted in lower ARS dye removal. Furthermore, the MCN could easily be regenerated and reused for up to at least five cycles with more than 70% of its original efficiency. Most importantly, the spent MCN was pyrolytically converted into N-doped magnetic carbon and used as an adsorbent for various dyes, thus establishing a waste-free adsorption process.

Removal of methylene blue dye using nano zerovalent iron, nanoclay and iron impregnated nanoclay - a comparative study

There has been an increasing challenge from the emission of methylene blue (MB) dye-containing wastewater and its management methods in industry. The sorption process is one conventionally used method. In this study, nanoclay, nano zero valent iron (nZVI), and iron impregnated nanoclay were prepared and studied for the removal of MB dye in batch mode. The effects of operating parameters like pH, dye concentration, sorbent dosage, and contact time were investigated and optimized. The nZVI, nanoclay, and iron impregnated nanoclay sorbents showed zeta potentials of -32.1, -53.4, and -40.7 mV, respectively. All the nano adsorbents were crystalline. The nanoclay was characterized by an average surface area, pore volume and pore diameter of 43.49 m2 g-1, 0.104 cm3 g-1 and 2.806 nm, respectively. nZVI showed a surface area of 47.125 m2 g-1, pore volume of 0.119 cm3 g-1, and pore diameter of 3.291 nm. And iron impregnated nanoclay showed a surface area of 73.110 m2 g-1 with a pore volume of 15 cm3 g-1 and a pore diameter size of 3.83 nm. A Langmuir EXT nitrogen gas adsorption isotherm (R 2 ∼ 0.99) was the best fit. The thermodynamics parameters, such as ΔG° (-12.64 to -0.63 kJ mol-1), ΔH° (+0.1 to +62.15 kJ mol-1) and ΔS° (+0.10 to +0.22 kJ mol-1), confirmed that a spontaneous and endothermic adsorption process took place at a high rate of disorder. Iron impregnated nanoclay showed higher negative Gibbs free energy (-12.64 kJ mol-1), higher enthalpy change (+62.5 kJ mol-1) and entropy (+0.22 kJ mol-1) and gave a better MB removal performance. In addition, the lower negative heat of enthalpy for all adsorptions proved the dominance of physisorption. The methylene blue adsorption isotherm on nZVI and nanoclay showed the best fit with the Freundlich isotherm model with correlation coefficients (R 2) ∼0.98 and 0.99, respectively. Whereas the Langmuir adsorption isotherm was the best fit for iron impregnated nanoclay (R 2 ∼ 0.98). The adsorption activities of nZVI, nanoclay and iron impregnated nanoclay were fitted to a pseudo-second-order kinetic model with correlation coefficients (R 2) of 0.999, 0.997 and 0.983, respectively. The optimal pH 7.0 (RE: 99.1 ± 0.73%), initial MB concentration 40 ppm (RE: 99.9 ± 0.03%), contact time 120 min (RE: 99.9 ± 0.9%), and adsorbent dose 80 (99.9 ± 0.03%) were obtained for iron impregnated nanoclay. The optimal operational parameters of nanoclay and nZVI, respectively, were pH 11.0 and 13.0, initial MB concentration 20 and 20 ppm, adsorbent dose 100 and 140 mg, and contact time 120 and 140 min. In general, iron impregnated nanoclay has shown promising cationic dye adsorbance for industrial applications; but a recyclability test is suggested before scale-up.

Modulating transparency and colour of cellulose nanocrystal composite films by varying polymer molecular weight

HYPOTHESIS

Cellulose nanocrystals (CNC) can produce photonic composite films that selectively reflect light based on their periodic cholesteric structure. The hypothesis of this research is that by incorporating water-soluble polymer, photonic properties of CNC composite film can be designed by manipulating the polymer molecular weight.

EXPERIMENTAL

Flexible free-standing composite films of five different poly (ethylene glycol) (PEG) molecular weights were prepared via air drying under a controlled environment, and characterised by reflectance UV-vis spectrometer, atomic force microscopy (AFM) and scanning electron microscopy (SEM). Films with each molecular weight were investigated over a concentration range.

FINDINGS

The colour and transmission haze of the composite films was modified by varying both the PEG molecular weight and concentration. Depending on the molecular weight, the films were able to reflect light from the UV region (242 nm) across the visible spectrum to the near-infrared region (832 nm). Different trends in variation of the reflected light based on the molecular weight was found with increasing PEG concentration and was explained by weak depletion interactions occurring between CNC and PEG, which was reduced with increasing PEG molecular weight.

Superfast flow reactor derived from the used cigarette filter for the degradation of pollutants in water

Developing high value-added products from the waste materials is highly promising from the perspective of environmental protection and resource recovery. Herein, the used cigarette filter was recycled to prepare the flow reactor via a clean and facile strategy. A continuous-flow reduction method was adopted to produce the gold nanoparticles on deacetylated cigarette filter without any extra chemical modifier, reductant or surfactant. The obtained filter was applied as a continuous-flow reactor and showed a high permeability and ultrafast flow catalytic ability. The permeability coefficient of the reactor was about 1.4 × 10^-10 m². This work provided a clean method to covert the waste cigarette filter to useful flow reactor with the relatively simple steps, and the product had a potential for the fast reduction of 4-nitrophenol and dyes including methyl blue and methylene orange.

Highly stable and thermo-responsive gel foams by synergistically combining glycyrrhizic acid nanofibrils and cellulose nanocrystals

HYPOTHESIS

Natural saponin glycyrrhizic acid (GA) and GA nanofibrils (GNFs) are effective foaming agents for formulation of aqueous food-grade foams. Through the synergistic combination of soft semiflexible GNFs with rigid nanofiller cellulose nanocrystals (CNCs), it should be possible to create advanced composite foams with a more complex structure and diverse properties including high stability and stimuli responsiveness.

EXPERIMENTS

Foams containing mixtures of GNFs and CNCs were prepared, and their formation and stability were investigated. A range of microscopy techniques and small deformation oscillatory shear were adopted to examine the microstructure and viscoelasticity of foams, and a stabilization mechanism for highly stable foams was then established. Further, the temperature-responsive destabilization of foams was evaluated.

FINDINGS

CNCs are homogeneously distributed in the architecture and mechanically reinforce the GNF fibrillar network, leading to a highly viscoelastic composite network in the continuous phase of foams, which is the key factor responsible for their high stability. Such ultra-stable gel foams display tunable thermo-responsive behavior and a rapid on-demand destabilization upon heating by inducing a phase transition of the bulk composite network. Our work opens up new scenarios on the use of a novel combination of all-natural, sustainable nanoscale building blocks to develop aqueous "superfoams" which are highly stable, stimulable and processable.

Molecular recognition at the air-water interface: nanoarchitectonic design and physicochemical understanding

Although molecular recognition at the air-water interface has been researched for over 30 years, investigations on its fundamental aspects are still active research targets in current science. In this perspective article, developments and future possibilities of molecular recognition at the air-water interface from pioneering research efforts to current examples are overviewed especially from the physico-chemical viewpoints. Significant enhancements of binding constants for molecular recognition are actually observed at the air-water interface although molecular interactions such as hydrogen bonding are usually suppressed in aqueous media. Recent advanced analytical strategies for direct characterization of interfacial molecules also confirmed the promoted formation of hydrogen bonding at the air-water interfaces. Traditional quantum chemical approaches indicate that modulation of electronic distributions through effects from low-dielectric phases would be the origin of enhanced molecular interactions at the air-water interface. Further theoretical considerations suggest that unusual potential changes for enhanced molecular interactions are available only within a limited range from the interface. These results would be related with molecular recognition in biomolecular systems that is similarly supported by promoted molecular interactions in interfacial environments such as cell membranes, surfaces of protein interiors, and macromolecular interfaces.

Nanoarchitectonics beyond Self-Assembly: Challenges to Create Bio-Like Hierarchic Organization

Incorporation of non-equilibrium actions in the sequence of self-assembly processes would be an effective means to establish bio-like high functionality hierarchical assemblies. As a novel methodology beyond self-assembly, nanoarchitectonics, which has as its aim the fabrication of functional materials systems from nanoscopic units through the methodological fusion of nanotechnology with other scientific disciplines including organic synthesis, supramolecular chemistry, microfabrication, and bio-process, has been applied to this strategy. The application of non-equilibrium factors to conventional self-assembly processes is discussed on the basis of examples of directed assembly, Langmuir-Blodgett assembly, and layer-by-layer assembly. In particular, examples of the fabrication of hierarchical functional structures using bio-active components such as proteins or by the combination of bio-components and two-dimensional nanomaterials, are described. Methodologies described in this review article highlight possible approaches using the nanoarchitectonics concept beyond self-assembly for creation of bio-like higher functionalities and hierarchical structural organization.

Foam Separation of Dyes Using Anionic, Cationic, and Amphoteric Surfactants

Foam separation can selectively remove a target substance from a solution via adsorption of the substance with the surfactant at the surface of the bubble. A cationic dye, methylene blue, and an anionic dye, Fast Green FCF, were prepared as substances to be removed via foam separation. Anionic (sodium dodecyl sulfate, SDS), cationic (dodecyltrimethylammonium chloride, DTAC), and amphoteric (3-(dodecyldimethylammonio)propane-1-sulfonate, SB-12) surfactants were used in the foam separation process. The effectiveness of the surfactants for removing the cationic methylene blue increased as follows: DTAC < SB-12 < SDS. On the other hand, the effectiveness of the surfactants for removing the anionic Fast Green FCF was in the opposite order. The dyes were effectively adsorbed by the foams via electrostatic interactions between the oppositely charged surfactant and the dye molecules. Since amphoteric surfactants have both anionic and cationic charges in a molecule, they could effectively remove both dyes in the foam separation process. Therefore, it was found that the amphoteric surfactant was highly versatile. Analysis of the kinetics of the removal rate showed that the aqueous solutions of monomers could remove the dyes more effectively than micellar solutions in foam separation.

Phosphoric Acid Activated Carbon from Melia azedarach Waste Sawdust for Adsorptive Removal of Reactive Orange 16: Equilibrium Modelling and Thermodynamic Analysis

Waste wood biomass as precursor for manufacturing activated carbon (AC) can provide a solution to ever increasing global water quality concerns. In our current work, Melia azedarach derived phosphoric acid-treated AC (MA-AC400) was manufactured at a laboratory scale. This novel MA-AC400 was tested for RO16 dye removal performance as a function of contact time, adsorbent dosage, pH, temperature and initial dye concentration in a batch scale arrangement. MA-AC400 was characterized via scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering (DLS) and fluorescence spectroscopy. MA-AC400 is characterized as mesoporous with BET surface area of 293.13 m² g^-1 and average pore width of 20.33 Å. pH_PZC and Boehm titration confirm the acidic surface charges with dominance of phenolic functional groups. The average DLS particle size of MA-AC400 was found in the narrow range of 0.12 to 0.30 µm and this polydispersity was confirmed with multiple excitation fluorescence wavelengths. MA-AC400 showed equilibrium adsorption efficiency of 97.8% for RO16 dye at its initial concentration of 30 mg L^-1 and adsorbent dose of 1 g L^-1. Thermodynamic study endorsed the spontaneous, favorable, irreversible and exothermic process for RO16 adsorption onto MA-AC400. Equilibrium adsorption data was better explained by Langmuir with high goodness of fit (R², 0.9964) and this fitness was endorsed with lower error functions. The kinetics data was found well fitted to pseudo-second order (PSO), and intra-particle diffusion kinetic models. Increasing diffusion constant values confirm the intraparticle diffusion at higher RO16 initial concentration and reverse was true for PSO chemisorption kinetics. MA-AC400 exhibited low desorption with studied eluents and its cost was calculated to be $8.36/kg.

A cellulose monolith supported metal/organic framework as a hierarchical porous material for a flow reaction

A novel cellulose monolith supported ZIF-8 metal organic framework as a hierarchical porous material was designed by using a highly effective pump injection method, which is used for a flow-based reaction.