1
|
Vakili M, Cagnetta G, Deng S, Wang W, Gholami Z, Gholami F, Dastyar W, Mojiri A, Blaney L. Regeneration of exhausted adsorbents after PFAS adsorption: A critical review. JOURNAL OF HAZARDOUS MATERIALS 2024; 471:134429. [PMID: 38691929 DOI: 10.1016/j.jhazmat.2024.134429] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/18/2024] [Revised: 03/26/2024] [Accepted: 04/24/2024] [Indexed: 05/03/2024]
Abstract
The adsorption process efficiently removes per- and polyfluoroalkyl substances (PFAS) from water, but managing exhausted adsorbents presents notable environmental and economic challenges. Conventional disposal methods, such as incineration, may reintroduce PFAS into the environment. Therefore, advanced regeneration techniques are imperative to prevent leaching during disposal and enhance sustainability and cost-effectiveness. This review critically evaluates thermal and chemical regeneration approaches for PFAS-laden adsorbents, elucidating their operational mechanisms, the influence of water quality parameters, and their inherent advantages and limitations. Thermal regeneration achieves notable desorption efficiencies, reaching up to 99% for activated carbon. However, it requires significant energy input and risks compromising the adsorbent's structural integrity, resulting in considerable mass loss (10-20%). In contrast, chemical regeneration presents a diverse efficiency landscape across different regenerants, including water, acidic/basic, salt, solvent, and multi-component solutions. Multi-component solutions demonstrate superior efficiency (>90%) compared to solvent-based solutions (12.50%), which, in turn, outperform salt (2.34%), acidic/basic (1.17%), and water (0.40%) regenerants. This hierarchical effectiveness underscores the nuanced nature of chemical regeneration, significantly influenced by factors such as regenerant composition, the molecular structure of PFAS, and the presence of organic co-contaminants. Exploring the conditional efficacy of thermal and chemical regeneration methods underscores the imperative of strategic selection based on specific types of PFAS and material properties. By emphasizing the limitations and potential of particular regeneration schemes and advocating for future research directions, such as exploring persulfate activation treatments, this review aims to catalyze the development of more effective regeneration processes. The ultimate goal is to ensure water quality and public health protection through environmentally sound solutions for PFAS remediation efforts.
Collapse
Affiliation(s)
| | - Giovanni Cagnetta
- Faculty of Geosciences and Environmental Engineering, Southwest Jiaotong University, Chengdu 610031, China.
| | - Shubo Deng
- State Key Joint Laboratory of Environment Simulation and Pollution Control (SKLESPC), Beijing Key Laboratory for Emerging Organic Contaminants Control, School of Environment, Tsinghua University, Beijing 100084, China
| | - Wei Wang
- State Key Laboratory of Plateau Ecology and Agriculture, Qinghai University, Xi'ning, Qinghai Province 810016, China
| | - Zahra Gholami
- ORLEN UniCRE, a.s, Revoluční 1521/84, 400 01 Ústí nad Labem, Czech Republic
| | - Fatemeh Gholami
- Department of Mathematics, Physics, and Technology, Faculty of Education, University of West Bohemia, Klatovská 51, Plzeň 301 00, Czech Republic
| | - Wafa Dastyar
- Chemical, Environmental, and Materials Engineering Department, McArthur Engineering Building, University of Miami, Coral Gables, FL 33124, USA
| | - Amin Mojiri
- School of Sustainable Engineering and the Built Environment, Arizona State University, Tempe, AZ 85287-3005, USA
| | - Lee Blaney
- University of Maryland Baltimore County, Department of Chemical, Biochemical, and Environmental Engineering, Baltimore, MD 21250, USA
| |
Collapse
|
2
|
Lei X, Lian Q, Zhang X, Karsili TK, Holmes W, Chen Y, Zappi ME, Gang DD. A review of PFAS adsorption from aqueous solutions: Current approaches, engineering applications, challenges, and opportunities. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 321:121138. [PMID: 36702432 DOI: 10.1016/j.envpol.2023.121138] [Citation(s) in RCA: 24] [Impact Index Per Article: 24.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/17/2022] [Revised: 01/17/2023] [Accepted: 01/21/2023] [Indexed: 06/18/2023]
Abstract
Per- and polyfluoroalkyl substances (PFAS) have drawn great attention due to their wide distribution in water bodies and toxicity to human beings. Adsorption is considered as an efficient treatment technique for meeting the increasingly stringent environmental and health standards for PFAS. This paper systematically reviewed the current approaches of PFAS adsorption using different adsorbents from drinking water as well as synthetic and real wastewater. Adsorbents with large mesopores and high specific surface area adsorb PFAS faster, their adsorption capacities are higher, and the adsorption process are usually more effective under low pH conditions. PFAS adsorption mechanisms mainly include electrostatic attraction, hydrophobic interaction, anion exchange, and ligand exchange. Various adsorbents show promising performances but challenges such as requirements of organic solvents in regeneration, low adsorption selectivity, and complicated adsorbent preparations should be addressed before large scale implementation. Moreover, the aid of decision-making tools including response surface methodology (RSM), techno-economic assessment (TEA), life cycle assessment (LCA), and multi criteria decision analysis (MCDA) were discussed for engineering applications. The use of these tools is highly recommended prior to scale-up to determine if the specific adsorption process is economically feasible and sustainable. This critical review presented insights into the most fundamental aspects of PFAS adsorption that would be helpful to the development of effective adsorbents for the removal of PFAS in future studies and provide opportunities for large-scale engineering applications.
Collapse
Affiliation(s)
- Xiaobo Lei
- Department of Civil Engineering, University of Louisiana at Lafayette, Lafayette, LA 70504, USA; Center for Environmental Technology, The Energy Institute of Louisiana, University of Louisiana at Lafayette, P. O. Box 43597, Lafayette, LA, 70504, USA
| | - Qiyu Lian
- Department of Civil Engineering, University of Louisiana at Lafayette, Lafayette, LA 70504, USA; Center for Environmental Technology, The Energy Institute of Louisiana, University of Louisiana at Lafayette, P. O. Box 43597, Lafayette, LA, 70504, USA
| | - Xu Zhang
- Department of Civil Engineering, University of Louisiana at Lafayette, Lafayette, LA 70504, USA; Beijing International Scientific and Technological Cooperation Base of Water Pollution Control Techniques for Antibiotics and Resistance Genes, School of Civil Engineering, Beijing Jiaotong University, 3 Shangyuancun, Beijing 100044, PR China
| | - Tolga K Karsili
- Department of Chemistry, University of Louisiana at Lafayette, Lafayette, LA 70504, USA
| | - William Holmes
- Center for Environmental Technology, The Energy Institute of Louisiana, University of Louisiana at Lafayette, P. O. Box 43597, Lafayette, LA, 70504, USA; Department of Chemical Engineering, University of Louisiana at Lafayette, Lafayette, LA 70504, USA
| | - Yushun Chen
- State Key Laboratory of Freshwater Ecology and Biotechnology, Institute of Hydrobiology, Chinese Academy of Sciences, Wuhan, Hubei, 430072, PR China
| | - Mark E Zappi
- Center for Environmental Technology, The Energy Institute of Louisiana, University of Louisiana at Lafayette, P. O. Box 43597, Lafayette, LA, 70504, USA; Department of Chemical Engineering, University of Louisiana at Lafayette, Lafayette, LA 70504, USA
| | - Daniel Dianchen Gang
- Department of Civil Engineering, University of Louisiana at Lafayette, Lafayette, LA 70504, USA; Center for Environmental Technology, The Energy Institute of Louisiana, University of Louisiana at Lafayette, P. O. Box 43597, Lafayette, LA, 70504, USA.
| |
Collapse
|
3
|
Wacławek S, Krawczyk K, Silvestri D, Padil VV, Řezanka M, Černík M, Jaroniec M. Cyclodextrin-based strategies for removal of persistent organic pollutants. Adv Colloid Interface Sci 2022; 310:102807. [DOI: 10.1016/j.cis.2022.102807] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/11/2022] [Revised: 10/19/2022] [Accepted: 10/28/2022] [Indexed: 11/08/2022]
|
4
|
Barisci S, Suri R. Occurrence and removal of poly/perfluoroalkyl substances (PFAS) in municipal and industrial wastewater treatment plants. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2021; 84:3442-3468. [PMID: 34928819 DOI: 10.2166/wst.2021.484] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
The presence of poly- and perfluoroalkyl substances (PFAS) has caused serious problems for drinking water supplies especially at intake locations close to PFAS manufacturing facilities, wastewater treatment plants (WWTPs), and sites where PFAS-containing firefighting foam was regularly used. Although monitoring is increasing, knowledge on PFAS occurrences particularly in municipal and industrial effluents is still relatively low. Even though the production of C8-based PFAS has been phased out, they are still being detected at many WWTPs. Emerging PFAS such as GenX and F-53B are also beginning to be reported in aquatic environments. This paper presents a broad review and discussion on the occurrence of PFAS in municipal and industrial wastewater which appear to be their main sources. Carbon adsorption and ion exchange are currently used treatment technologies for PFAS removal. However, these methods have been reported to be ineffective for the removal of short-chain PFAS. Several pioneering treatment technologies, such as electrooxidation, ultrasound, and plasma have been reported for PFAS degradation. Nevertheless, in-depth research should be performed for the applicability of emerging technologies for real-world applications. This paper examines different technologies and helps to understand the research needs to improve the development of treatment processes for PFAS in wastewater streams.
Collapse
Affiliation(s)
- Sibel Barisci
- Civil and Environmental Engineering Department, Water and Environmental Technology (WET) Center, Temple University, 1947 N 12th Street, Philadelphia, PA 19122, USA E-mail:
| | - Rominder Suri
- Civil and Environmental Engineering Department, Water and Environmental Technology (WET) Center, Temple University, 1947 N 12th Street, Philadelphia, PA 19122, USA E-mail:
| |
Collapse
|
5
|
A review of emerging PFAS contaminants: sources, fate, health risks, and a comprehensive assortment of recent sorbents for PFAS treatment by evaluating their mechanism. RESEARCH ON CHEMICAL INTERMEDIATES 2021. [DOI: 10.1007/s11164-021-04603-7] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|
6
|
Preparation of Molecularly Imprinted Carbon Microspheres by One-Pot Hydrothermal Method and Their Adsorption Properties to Perfluorooctane Sulfonate. CHINESE JOURNAL OF ANALYTICAL CHEMISTRY 2019. [DOI: 10.1016/s1872-2040(19)61200-4] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register]
|
7
|
Nano-Sized Cyclodextrin-Based Molecularly Imprinted Polymer Adsorbents for Perfluorinated Compounds-A Mini-Review. NANOMATERIALS 2015; 5:981-1003. [PMID: 28347047 PMCID: PMC5312915 DOI: 10.3390/nano5020981] [Citation(s) in RCA: 51] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/10/2015] [Revised: 05/14/2015] [Accepted: 05/19/2015] [Indexed: 11/24/2022]
Abstract
Recent efforts have been directed towards the design of efficient and contaminant selective remediation technology for the removal of perfluorinated compounds (PFCs) from soils, sediments, and aquatic environments. While there is a general consensus on adsorption-based processes as the most suitable methodology for the removal of PFCs from aquatic environments, challenges exist regarding the optimal materials design of sorbents for selective uptake of PFCs. This article reviews the sorptive uptake of PFCs using cyclodextrin (CD)-based polymer adsorbents with nano- to micron-sized structural attributes. The relationship between synthesis of adsorbent materials and their structure relate to the overall sorption properties. Hence, the adsorptive uptake properties of CD-based molecularly imprinted polymers (CD-MIPs) are reviewed and compared with conventional MIPs. Further comparison is made with non-imprinted polymers (NIPs) that are based on cross-linking of pre-polymer units such as chitosan with epichlorohydrin in the absence of a molecular template. In general, MIPs offer the advantage of selectivity, chemical tunability, high stability and mechanical strength, ease of regeneration, and overall lower cost compared to NIPs. In particular, CD-MIPs offer the added advantage of possessing multiple binding sites with unique physicochemical properties such as tunable surface properties and morphology that may vary considerably. This mini-review provides a rationale for the design of unique polymer adsorbent materials that employ an intrinsic porogen via incorporation of a macrocyclic compound in the polymer framework to afford adsorbent materials with tunable physicochemical properties and unique nanostructure properties.
Collapse
|
8
|
Kawano S, Kida T, Miyawaki K, Fukuda Y, Kato E, Nakano T, Akashi M. Adsorption capability of urethane-crosslinked heptakis(2,6-di-O-methyl)-β-cyclodextrin polymers toward polychlorobiphenyls in nonpolar organic media. Polym J 2015. [DOI: 10.1038/pj.2015.13] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
9
|
Kawano S, Kida T, Miyawaki K, Noguchi Y, Kato E, Nakano T, Akashi M. Cyclodextrin polymers as highly effective adsorbents for removal and recovery of polychlorobiphenyl (PCB) contaminants in insulating oil. ENVIRONMENTAL SCIENCE & TECHNOLOGY 2014; 48:8094-8100. [PMID: 24946276 DOI: 10.1021/es501243v] [Citation(s) in RCA: 28] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
A total of 179 countries (parties) ratified the Stockholm Convention on persistent organic pollutants (POPs) and agreed to destroy polychlorobiphenyls (PCBs) and develop a sound management plan by 2028. Currently, still 3 million tons of PCB-contaminated oil and equipment need to be managed under the Stockholm Convention. Thus, the development of a facile and environmentally benign method to treat large amounts of oil stockpiles contaminated with PCBs is a crucial subject. Herein, we report that cyclodextrin (CD) polymers, which are easily prepared by cross-linking the renewable cyclic oligosaccharide γ-cyclodextrin (γ-CD) with dibasic acid dichlorides, are a new selective and powerful adsorbent to remove PCB contaminants in oil. When PCB (100 ppm)-contaminated oil was passed through a column packed with the terephthaloyl-cross-linked γ-CD polymer (TP-γ-CD polymer) at 80-110 °C, the PCB contaminants were completely removed from the oil. Additionally, methyl esterification of the free carboxylic groups of the TP-γ-CD polymer enabled the complete recovery of the PCBs adsorbed on the polymer (with >99.9% recovery efficiency) by simply washing with acetone. The methyl-esterified TP-γ-CD polymer could be recycled at least 10 times for PCB adsorption without any loss in the adsorption capability. These results revealed that the γ-CD polymers can function as highly effective and powerful adsorbents for the removal and recovery of PCBs from PCB-contaminated oil and, thus, significantly contribute to the protection of the global environment.
Collapse
Affiliation(s)
- Shintaro Kawano
- Department of Applied Chemistry, Graduate School of Engineering, Osaka University , 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
| | | | | | | | | | | | | |
Collapse
|
10
|
Du Z, Deng S, Bei Y, Huang Q, Wang B, Huang J, Yu G. Adsorption behavior and mechanism of perfluorinated compounds on various adsorbents--a review. JOURNAL OF HAZARDOUS MATERIALS 2014; 274:443-54. [PMID: 24813664 DOI: 10.1016/j.jhazmat.2014.04.038] [Citation(s) in RCA: 458] [Impact Index Per Article: 45.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/04/2014] [Revised: 03/29/2014] [Accepted: 04/20/2014] [Indexed: 05/08/2023]
Abstract
Perfluorinated compounds (PFCs) have drawn great attention recently due to their wide distribution in aquatic environments and potential toxic to animals and human beings. Adsorption not only is an effective technology to remove PFCs from water or wastewater, but also affects PFC distribution at solid-liquid interfaces and their fate in aquatic environments. This article reviews the adsorption behavior of different PFCs (mainly perfluorooctane sulfonate and perfluorooctanoate) on various adsorptive materials. Some effective adsorbents are introduced in detail in terms of their preparation, characteristics, effects of solution chemistry and PFC properties on adsorption. Adsorption mechanisms of PFCs on different adsorbents are summarized, and various interactions including electrostatic interaction, hydrophobic interaction, ligand exchange, and hydrogen bond are fully reviewed. The adsorbents with amine groups generally have high adsorption capacity for PFCs, and formation of micelles/hemi-micelles plays an important role in achieving high adsorption capacity of perfluorinated surfactants on some porous adsorbents. Hydrophobic interaction is mainly responsible for PFC adsorption, but the difference between PFCs and traditional hydrocarbons has not clearly clarified. This review paper would be helpful for the preparation of effective adsorbents for PFC removal and understanding interfacial process of PFCs during their transport and fate in aquatic environments.
Collapse
Affiliation(s)
- Ziwen Du
- School of Environment, POPs Research Center, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084, China; Collaborative Innovation Center for Regional Environmental Quality, Tsinghua University, Beijing 100084, China
| | - Shubo Deng
- School of Environment, POPs Research Center, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084, China; Collaborative Innovation Center for Regional Environmental Quality, Tsinghua University, Beijing 100084, China.
| | - Yue Bei
- School of Environment, POPs Research Center, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084, China; Collaborative Innovation Center for Regional Environmental Quality, Tsinghua University, Beijing 100084, China
| | - Qian Huang
- School of Environment, POPs Research Center, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084, China; Collaborative Innovation Center for Regional Environmental Quality, Tsinghua University, Beijing 100084, China
| | - Bin Wang
- School of Environment, POPs Research Center, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084, China; Collaborative Innovation Center for Regional Environmental Quality, Tsinghua University, Beijing 100084, China
| | - Jun Huang
- School of Environment, POPs Research Center, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084, China; Collaborative Innovation Center for Regional Environmental Quality, Tsinghua University, Beijing 100084, China
| | - Gang Yu
- School of Environment, POPs Research Center, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084, China; Collaborative Innovation Center for Regional Environmental Quality, Tsinghua University, Beijing 100084, China
| |
Collapse
|