A three-dimensional hierarchical porous graphene aerogel as a fiber coating for headspace solid-phase microextraction: Enhancing the enrichment and detection of polychlorinated naphthalenes in fish

In this study, a novel three-dimensional hierarchical porous deep eutectic solvents-modified graphene aerogel (3D DES-GA) was synthesized for use as a solid-phase microextraction (SPME) fiber coating. The SPME fiber was characterized by its fluffy and hierarchical porous structure, uniform thickness, and rapid mass transfer capabilities. This fiber demonstrated a lifetime (≥160 uses) and excellent precision (with relative standard deviations of 2.4-6.6% for single fiber and 6.0-9.8% for fiber-to-fiber repeatability). The SPME fiber also exhibited remarkable extraction performance for polycyclic aromatic hydrocarbons and polychlorinated biphenyls, which are common persistent organic pollutants in environmental samples. When combined with gas chromatography-tandem mass spectrometry, the method allowed for high-efficiency extraction (enrichment factors ranging from 1225 to 4652 folds) and sensitive determination (limit of detection ranging from 0.010 to 0.056 pg g-1) of polychlorinated naphthalenes (PCNs) in complex samples. To validate this method, we applied it to the determination of four PCNs in five types of fish tissues. The results revealed the presence of 1-chloronaphthalene at concentrations of 7.0 ± 2.9-34.8 ± 2.1 pg g-1 and 1,4-dichloronaphthalene at concentrations of 6.0 ± 0.3-10.9 ± 1.4 pg g-1 in three fish species. Compared with reported sample pretreatment methods reported in the literature, this proposed headspace SPME method offers additional advantages, including simplicity of operation and reduced sample and organic solvent consumption.

Development of a solid phase microextraction method for the determination of nicotine in dried mushrooms

Official control of EU market foodstuffs repeatedly reports high nicotine levels in dried wild mushrooms without any clear scientific consensus about their origin. The advised constant monitoring calls for improvements to existing methods. For this purpose, our aim was to develop a headspace solid phase microextraction (HS-SPME) method coupled to gas chromatography with mass spectrometric detection (GC-MS) that would eliminate the need for extensive sample pre-treatment. The type of fiber coating, amount of sample, extraction temperature and time, desorption time and salt addition were investigated and optimized as parameters affecting the SPME procedure. The optimized conditions were used to validate a quantitative method for nicotine analysis by matrix-matched calibration and isotopically labelled internal standard correction. The method provided good linearity (r2 = 0.9994) over the tested concentration range (0.025-1 mg kg-1), low detection limit (0.005 mg kg-1) and low quantification limit (0.017 mg kg-1) for nicotine, being below the EU foodstuff regulations. For both of the tested concentration levels (0.050 and 0.200 mg kg-1), precision expressed as relative standard deviation was below 10% (4.5% and 8.5%, respectively), while accuracy was 98.2% and 100.3%. The optimized method was then used to determine nicotine levels in 18 samples of dried Boletus mushrooms from southeastern European countries entering the EU market. We demonstrated our HS-SPME procedure to be fast, simple, sensitive, solvent-free, cost-effective and thus suitable for controlling consumer safety regarding nicotine level in dried mushrooms.

Identification of volatile producing enzymes in higher fungi: Combining analytical and bioinformatic methods

Filamentous fungi harbor the genetic potential for the biosynthesis of several secondary metabolites including various volatile organic compounds (VOCs). Nonetheless, under standard laboratory conditions, many of these VOCs are not formed. Furthermore, little is known about enzymes involved in the production of fungal VOCs. To tap these interesting topics, we developed an approach to identify enzymes putatively involved in the fungal VOC biosynthesis. In this chapter, we highlight different fungal cultivation methods and techniques for the extraction of VOCs, including a method that allows the noninvasive analysis of VOCs. In addition using terpene synthases as an example, it is depicted how enzymes putatively involved in VOC synthesis can be identified by means of bioinformatic approaches. Transcriptomic data of chosen genes combined with volatilome data obtained during different developmental stages is demonstrated as a powerful tool to identify enzymes putatively involved in fungal VOC biosynthesis. Especially with regard to subsequent enzyme characterization, this procedure is a target-oriented way to save time and efforts by considering only the most important enzymes.

Novel solid-phase microextraction fiber coatings: A review

The materials used for the fabrication of solid-phase microextraction fiber coatings in the past five years are summarized in the current review, including carbon, metal-organic frameworks, covalent organic frameworks, aerogel, polymer, ionic liquids/poly (ionic liquids), metal oxides, and natural materials. The preparation approaches of different coatings, such as sol-gel technique, in-situ growth, electrodeposition, and glue methods, are briefly reviewed together with the evolution of the supporting substrates. In addition, the limitations of the current coatings and the future development directions of solid-phase microextraction are presented.

Herbivore-induced and constitutive volatiles are controlled by different oxylipin-dependent mechanisms in rice

Despite the importance of volatile organic compounds (VOCs) for plants, control mechanisms for their basal and stress-induced biosynthesis and release remain unclear. We sampled and characterized headspace and internal leaf volatile pools in rice (Oryza sativa), after a simulated herbivory treatment, which triggers an endogenous jasmonate burst. Certain volatiles, such as linalool, were strongly upregulated by simulated herbivory stress. In contrast, other volatiles, such as β-caryophyllene, were constitutively emitted and fluctuated according to time of day. Transcripts of the linalool synthase gene transiently increased 1-3 h after exposure of rice to simulated herbivory, whereas transcripts of caryophyllene synthase peaked independently at dawn. Unexpectedly, although emission and accumulation patterns of rice inducible and constitutive VOCs were substantially different, both groups of volatiles were compromised in jasmonate-deficient hebiba mutants, which lack the allene oxide cyclase (AOC) gene. This suggests that rice employs at least two distinct oxylipin-dependent mechanisms downstream of AOC to control production of constitutive and herbivore-induced volatiles. Levels of the JA precursor, 12-oxo-phytodienoic acid (OPDA), were correlated with constitutive volatile levels suggesting that OPDA or its derivatives could be involved in control of volatile emission in rice.

Thin Porous Poly(ionic liquid) Coatings for Enhanced Headspace Solid Phase Microextraction

In this contribution, thin poly(ionic liquid) (PIL) coatings with a well-defined pore structure built up from interpolyelectrolyte complexation between a PIL and poly(acrylic acid) (PAA) were successfully used for enhanced solid phase microextraction (SPME). The introduction of porosity with tunable polarity through the highly versatile PIL chemistry clearly boosts the potential of SPME in the detection of compounds at rather low concentrations. This work will inspire researchers to further explore the potential of porous poly(ionic liquid) materials in sensing and separation applications.

Protocells self-assembled by hydroxyapatite nanoparticles: Highly efficient and selective enrichment of chlorophenols in an aqueous environment

In this paper, amphiphilic hydroxyapatite (HAP) nanoparticles were modified by dibutyl phosphate (DBP) via covalent bonding. The modified HAP particles (m-HAP) were employed as building blocks to construct oil-in-water (O/W) Pickering emulsion, that displayed an excellent performance on the enrichment of organic pollutants dissolved in wastewater by extracting the organic molecules into the oil phase. Environment-friendly organic solvent hexanol was selected as oil phase and three types of monochlorophenol (2-chlorophenol, 3-chlorophenol, 4-chlorophenol) were chosen as model pollutants in simulated wastewater. Two types of natural water were also tested as a proof of principle. The enrichment percentage of chlorophenols was up to 98% in 140 s, following first order kinetics. Thermodynamic study suggested that the enrichment process is spontaneous and exothermic. The external environment of the protocells, such as pH, ionic strength and the natural organic matter have been investigated. This study provides a novel, convenient and environment-friendly approach for enrichment and removal of trace organic pollutants in wastewater.

Solid-phase microextraction: An appealing alternative for the determination of endogenous substances - A review

The determination of endogenous substances is of great significance for obtaining important biotic information such as biological components, metabolic pathways and disease biomarkers in different living organisms (e.g. plants, insects, animals and humans). However, due to the complex matrix and the trace concentrations of target analytes, the sample preparation procedure is an essential step before the analytes of interest are introduced into a detection instrument. Solid-phase microextraction (SPME), an emerging sample preparation technique that integrates sampling, extraction, concentration, and sample introduction into one step, has gained wide acceptance in various research fields, including in the determination of endogenous compounds. In this review, recent developments and applications of SPME for the determination of endogenous substances over the past five years are summarized. Several aspects, including the design of SPME devices (sampling configuration and coating), applications (in vitro and in vivo sampling), and coupling with emerging instruments (comprehensive two-dimensional gas chromatography (GC × GC), ambient mass spectrometry (AMS) and surface enhanced Raman scattering (SERS)) are involved. Finally, the challenges and opportunities of SPME methods in endogenous substances analysis are also discussed.

Aroma Profile Analyses of Filamentous Fungi Cultivated on Solid Substrates

Filamentous fungi have been used since centuries in the production of food by means of solid substrate fermentation (SSF). The most applied SSF involving fungi is the cultivation of mushrooms, e.g., on tree stumps or sawdust, for human consumption. However, filamentous fungi are also key players during manufacturing of several processed foods, like mold cheese, tempeh, soy sauce, and sake. In addition to their nutritive values, these foods are widely consumed due to their pleasant flavors. Based on the potentials of filamentous fungi to grow on solid substrates and to produce valuable aroma compounds, in recent decades, several studies concentrated on the production of aroma compounds with SSF, turning cheap agricultural wastes into valuable flavors. In this review, we focus on the presentation of common analytical methods for volatile substances and highlight various applications of SSF of filamentous fungi dealing with the production of aroma compounds. Graphical Abstract.

Silicon carbide nanomaterial as a coating for solid-phase microextraction

Silicon carbide has excellent properties, such as corrosion resistance, high strength, oxidation resistance, high temperature, and so on. Based on these properties, silicon carbide was coated on stainless-steel wire and used as a solid-phase microextraction coating, and polycyclic aromatic hydrocarbons were employed as model analytes. Using gas chromatography, some important factors that affect the extraction efficiency were optimized one by one, and an analytical method was established. The analytical method showed wide linear ranges (0.1-30, 0.03-30, and 0.01-30 μg/L) with satisfactory correlation coefficients (0.9922-0.9966) and low detection limits (0.003-0.03 μg/L). To investigate the practical application of the method, rainwater and cigarette ash aqueous solution were collected as real samples for extraction and detection. The results indicate that silicon carbide has excellent application in the field of solid-phase microextraction.