Status and Prospect of Two-Dimensional Materials in Electrolytes for All-Solid-State Lithium Batteries

Replacing liquid electrolytes and separators in conventional lithium-ion batteries with solid-state electrolytes (SSEs) is an important strategy to ensure both high energy density and high safety. Searching for fast ionic conductors with high electrochemical and chemical stability has been the core of SSE research and applications over the past decades. Based on the atomic-level thickness and infinitely expandable planar structure, numerous two-dimensional materials (2DMs) have been exploited and applied to address the most critical issues of low ionic conductivity of SSEs and lithium dendrite growth in all-solid-state lithium batteries. This review introduces the research process of 2DMs in SSEs, then summarizes the mechanisms and strategies of inert and active 2DMs toward Li+ transport to improve the ionic conductivity and enhance the electrode/SSE interfacial compatibility. More importantly, the main challenges and future directions for the application of 2DMs in SSEs are considered, including the importance of exploring the relationship between the anisotropic structure of 2DMs and Li+ diffusion behavior, the exploitation of more 2DMs, and the significance of in situ characterizations in elucidating the mechanisms of Li+ transport and interfacial reactions. This review aims to provide a comprehensive understanding to facilitate the application of 2DMs in SSEs.

Morphology and size control of an amorphous conjugated polymer network containing quinone and pyrrole moieties via precipitation polymerization

Morphology and size control of insoluble and infusible conjugated polymers are significant for their applications. Development of a precipitation polymerization route without using a surface stabilizer is preferred to control the reaction, morphology, and size. In the present work, precipitation polymerization for an amorphous conjugated polymer network, a new type of polymerized structure containing functional units, was studied for the size and morphology control in the solution phase at low temperature. The random copolymerization of benzoquinone (BQ) and pyrrole (Py) monomers formed microspheres of the BQ-Py network polymers as the precipitates in the solution phase. The particle diameter was controlled in the range of 70 nm and 1 μm by changing the pH of the solution and concentration of the monomers. The resultant nanoparticles were applied to a metal-free electrocatalyst for the hydrogen evolution reaction (HER). The catalytic activity of the BQ-Py nanoparticles was higher than that of the bulk micrometer-sized particles. The results imply that the morphology and size of amorphous conjugated polymer networks can be controlled by precipitation polymerization.

A New, Thorough Look on Unusual and Neglected Group III-VI Compounds Toward Novel Perusals

The attention on group III-VI compounds in the last decades has been centered on the optoelectronic properties of indium and gallium chalcogenides. These outstanding properties are leading to novel advancements in terms of fundamental and applied science. One of the advantages of these compounds is to present laminated structures, which can be exfoliated down to monolayers. Despite the large knowledge gathered toward indium and gallium chalcogenides, the family of the group III-VI compounds embraces several other noncommon compounds formed by the other group III elements. These compounds present various crystal lattices, among which a great deal is offered from layered structures. Studies on aluminium chalcogenides show interesting potential as anodes in batteries and as semiconductors. Thallium (Tl), which is commonly present in the +1 oxidation state, is one of the key components in ternary chalcogenides. However, binary Tl-Q (Q = S, Se, Te) systems and derived films are still studied for their semiconducting and thermoelectric properties. This review aims to summarize the biggest features of these unusual materials and to shed some new light on them with the perspective that in the future, novel studies can revive these compounds in order to give rise to a new generation of technology.

Coatable 2D Conjugated Polymers Containing Bulky Macromolecular Guests for Thermal Imaging

Dynamic properties are derived from the structural flexibility of 2D polymers. Softening layered structures has the potential for tuning and enhancing the dynamic properties. In the present work, the flexibility of layered polydiacetylene (PDA) is tuned by the interlayer polymeric guests with different branching structures. PDA shows thermoresponsive color-change properties through shortening the effective conjugation length with molecular motion. Whereas the blue-to-red color transition is observed at certain threshold temperatures for the layered PDA without the interlayer guest, the intercalation of the bulky polymer guests lowers the starting temperature and widens the temperature range for the thermoresponsive color changes. The resultant layered composite of PDA and bulky polymer affords the homogeneous coating on substrates on the centimeter scale. The thermoresponsive color-change coating is applied to temperature-distribution imaging. The specific heat of liquids is colorimetrically estimated using the coating on the bottle. The coating on a silk cloth visualizes the temperature distribution on a simulated tissue during surgical operation using an ultrasonic coagulation cutting device. The coating can be applied to thermal imaging in a variety of fields. Moreover, the softening strategy contributes to explore dynamic properties of soft 2D materials.

Selective Syntheses of Thick and Thin Nanosheets Based on Correlation between Thickness and Lateral-Size Distribution

Exfoliation of layered materials, a typical route to obtain 2D materials, is not easily controlled because of the unpredictable downsizing processes. In particular, the thickness control remains as a complex challenge. Here, we found a correlation between the thickness and lateral size distribution of the exfoliated nanosheets, such as transition metal oxides and graphene oxide. The layered composites of the host metal oxides and interlayer organic guests are delaminated into the surface-modified nanosheets in organic dispersion media. The exfoliation behavior varies by combination of the hosts, guests, and dispersion media. Here, we found that the thick and thin nanosheets were obtained on the monodispersed and polydispersed conditions, respectively. The selective syntheses of the thick and thin nanosheets were achieved using a prediction model of the lateral size distribution. The correlation between the thickness and lateral size distribution can be applied to thickness-selective syntheses of 2D materials.

•

Surface-modified nanosheets are obtained by exfoliation of layered composites

•

Thickness of 2D materials has a correlation with the lateral size distribution

•

Thick and thin nanosheets are selectively synthesized under the predicted conditions

•

A prediction model of lateral size distribution is applied to the selective syntheses

Nanoarchitectonics for conductive polymers using solid and vapor phases

Conductive polymers have been extensively studied as functional organic materials due to their broad range of applications. Conductive polymers, such as polypyrrole, polythiophene, and their derivatives, are typically obtained as coatings and precipitates in the solution phase. Nanoarchitectonics for conductive polymers requires new methods including syntheses and morphology control. For example, nanoarchitectonics is achieved by liquid-phase syntheses with the assistance of templates, such as macromolecules and porous materials. This minireview summarizes the other new synthetic methods using the solid and vapor phases for nanoarchitectonics. In general, the monomers and related species are supplied from the solution phase. Our group has studied polymerization of heteroaromatic monomers using the solid and vapor phases. The surface and inside of solid crystals were used for the polymerization with the diffusion of the heteroaromatic monomer vapor. Our nanoarchitectonics affords to form homogeneous coatings, hierarchical structures, composites, and copolymers for energy-related applications. The concepts using solid and vapor phases can be applied to nanoarchitectonics for not only conductive polymers but also other polymers toward a variety of applications.

Self-Assembly of a Bilayer 2D Supramolecular Organic Framework in Water

Accurate control of the layer number of orderly stacked 2D polymers has been an unsettled challenge in self-assembly. Herein we describe the fabrication of a bilayer 2D supramolecular organic framework from a monolayer 2D supramolecular organic framework in water by utilizing the cooperative coordination of a rod-like bipyridine ligands to zinc porphyrin subunits of the monolayer network. The monolayer supramolecular framework is prepared from the co-assembly of an octacationic zinc porphyrin monomer and cucurbit[8]uril (CB[8]) in water through CB[8]-encapsulation-promoted dimerization of 4-phenylpyridiunium subunits that the zinc porphyrin monomer bear. The bilayer 2D supramolecular organic framework exhibits structural regularity in both solution and the solid state, which is characterized by synchrotron small-angle X-ray scattering and high-resolution transmission electron microscopic techniques. Atomic force microscopic imaging confirms that the bilayer character of the 2D supramolecular organic framework can be realized selectively on the micrometer scale.

Fast and efficient shear-force assisted production of covalently functionalized oxide nanosheets

HYPOTHESIS

While controlled and efficient exfoliation of layered oxides often remains a time consuming challenge, the surface modification of inorganic nanosheets is of outmost importance for future applications. The functionalization of the bulk material prior to exfoliation should allow the application of tools developped for Van der Waals materials to directly produce functionalized oxide nanosheets.

EXPERIMENTS

The Aurivillius phase Bi₂SrTa₂O₉ is functionalized by a linear aliphatic phosphonic acid via microwave-assisted reactions. The structure of the hybrid material and the coordination of the phosphonate group is scrutinized, notably by Pair Distribution Function. This functionalized layered oxide is then exfoliated in one hour in organic solvent, using high shear force dispersion. The obtained nanosheets are characterized in suspension and as deposits to check their chemical integrity.

FINDINGS

The covalent functionalization decreases the electrostatic cohesion between the inorganic layers leading to an efficient exfoliation in short time under shearing. The functionalization of the bulk material is preserved on the nanosheets upon exfoliation and plays a major role to enable liquid-phase exfoliation and in the stability of the resulting suspensions. This strategy is very promising for the straighforward preparation of functionalized nanosheets, paving the way for versatile design of new (multi)functional hybrid nanosheets for various potential applications.

Yield-prediction models for efficient exfoliation of soft layered materials into nanosheets

Yield-prediction models were studied for efficient exfoliation of soft layered materials stacked via van der Waals interactions with the assistance of machine learning on small experimental data. High-yield exfoliation of graphite and layered organic polymer was achieved under the conditions guided by the models in a limited number of experiments.