Effect of augmented reality-based rehabilitation of hand burns on hand function in children: A randomized controlled trial

BACKGROUND

Despite the use of traditional rehabilitation methods, hand function may still remain impaired in children suffering from burn injuries.

PURPOSE

This study aimed to assess the impact of implementing an augmented reality (AR) rehabilitation booklet designed for pediatric hand burn on their hand functionality.

STUDY DESIGN

This was a randomized controlled trial.

METHODS

Seventy-two children, aged 8-14 years with a hand burn, were randomly allocated into intervention (n = 36) and control (n = 36) groups. Children in the control group received routine rehabilitation program, while in the intervention group, children performed exercises using a printed booklet with related AR application. The Jebsen-Taylor Hand Function Test was completed before the intervention at the time of the patients' discharge and 1 month later.

RESULTS

The results of analysis of covariance based on baseline- and fully-adjusted models showed significant intervention effect after discharge as well as after intervention for hand function (mean difference [95% confidence interval] for discharge: -8.2 [-15.0 to -1.4] and for after intervention: -74.0 [-88.8 to -59.1]) and the items (all p < 0.05), except for writing and lifting large light objects for both after discharge and after intervention measures (all p-value > 0.05).

CONCLUSIONS

A significant decrease in the total time taking to complete the Jebsen-Taylor hand function test was observed in the intervention group compared to the control group 1 month after discharge. Rehabilitation of children with hand burns, using printed educational booklet with related AR application, improves their hand function.

Treatment of trigger finger with metacarpophalangeal joint blocking orthosis vs relative motion extension orthosis: A randomized clinical trial

BACKGROUND

The metacarpophalangeal joint blocking orthosis (MCPJ-BO) is one of the first-line orthotic treatment for patients with trigger finger (TF). Relative motion extension orthosis (RME-O) has recently emerged as a treatment option for various hand disorders involving TF.

PURPOSE

The primary objective of this study was to compare the effectiveness of 6 weeks of orthotic treatment with the MCPJ-BO and the RME-O for pain relief. Function and satisfaction with the orthosis were assessed as secondary objectives.

STUDY DESIGN

Randomized clinical study.

METHODS

Thirty patients with an average age of 50 years with Froimson stage 1-3 A1 pulley triggering participated in the study. They were randomly assigned to either the MCPJ-BO (n = 15; 10 females, five males) or the RME-O group (n = 15; 12 females, three males). The orthoses were worn full time for 6 weeks. All patients received patient education, activity modification, and flexor tendon gliding exercises as part of the rehabilitation program. Pre- and post-assessments included Numeric Pain Rating Scale, Disability of the Arm, Shoulder, and Hand questionnaire, and Quebec User Evaluation of Satisfaction with Assistive Technology questionnaire. The Mann-Whitney U test was conducted to analyze the difference between the two groups.

RESULTS

There were no significant differences between the two groups in pain and function before treatment (p < 0.05). Within-group comparisons indicated that both orthoses relieved pain, but the MCPJ-BO group achieved greater pain relief (p = 0.001). There was a significant improvement in function in the MCPJ-BO group, with a mean change of 12.7 (p = 0.0001). The overall success rates for the MCPJ-BO group and RME-O group were 60% and 27%, respectively. Patients in both groups had high satisfaction with the orthosis.

CONCLUSIONS

MCPJ-BO and RME-O could be used for pain relief in the treatment of TF. The MCPJ-BO appears to be more effective than the RME-O in improving function.

Validation of Temperature Sensors to Monitor Thermoplastic Splint Wear in Hand Surgery Patients

BACKGROUND

The aim of this study was to validate the use of temperature sensors to accurately measure thermoplastic volar forearm splint wear in a healthy cohort of volunteers using 5- and 15-minute temperature measurement intervals.

METHODS

A prospective diagnostic study was performed to evaluate the diagnostic accuracy of temperature sensors in monitoring splint wear in 8 healthy volunteers between December 2022 and June 2023. Temperature sensors were molded into thermoplastic volar forearm splints. Volunteers who were familiar with the study aims were asked to keep an exact log of the time spent wearing the splint ("actual wear time"). Sensors recorded temperatures every 5 or 15 minutes, and separate algorithms were developed to determine the sensor-detected wear time compared with the actual wear time as the gold standard. The algorithms were then externally validated with the total population.

RESULTS

The 5-minute and 15-minute algorithms demonstrated excellent sensitivity (99.1% vs 96.6%), specificity (99.9% vs 99.9%), positive (99.4% vs 99.5%) and negative (99.9% vs 99.3%) predictive value, and diagnostic accuracy (99.8% vs 99.3%), respectively. The 5-minute algorithm recorded 99.5% of the total splint hours, whereas the 15-minute algorithm recorded 96.1%. There was no significant difference between the actual time per wear session (5.4 ± 2.7 hours) and the time estimated by the 5-minute algorithm (5.4 ± 2.6 hours; P = .40), but there was a significant difference for the 15-minute algorithm (5.2 ± 2.6 hours; P < .001).

CONCLUSION

Temperature sensors can be used to accurately monitor thermoplastic volar forearm splint wear.

LEVEL OF EVIDENCE

Diagnostic II.

Finite Element Analysis of Upper Limb Splint Designs and Materials for 3D Printing

Three-dimensional (3D) printed splints must be lightweight and adequately ventilated to maximize the patient's convenience while maintaining requisite strength. The ensuing loss of strength has a substantial impact on the transformation of a solid splint model into a perforated or porous model. Thus, two methods for making perforations-standard approach and topological optimization-are investigated in this study. The objective of this research is to ascertain the impact of different perforation shapes and their distribution as well as topology optimization on the customized splint model. The solid splint models made of various materials have been transformed into porous designs to evaluate their strength by utilizing Finite Element (FE) simulation. This study will have a substantial effect on the designing concept for medical devices as well as other industries such as automobiles and aerospace. The novelty of the research refers to creating the perforations as well as applying topology optimization and 3D printing in practice. According to the comparison of the various materials, PLA had the least amount of deformation and the highest safety factor for all loading directions. Additionally, it was shown that all perforation shapes behave similarly, implying that the perforation shape's effect is not notably pronounced. However, square perforations seemed to perform the best out of all the perforation shape types. It was also obvious that the topology-optimized hand splint outperformed that with square perforations. The topology-optimized hand splint weighs 26% less than the solid splint, whereas the square-perforated hand splint weighs roughly 12% less. Nevertheless, the user must choose which strategy (standard perforations or topology optimization) to employ based on the available tools and prerequisites.

The use of exercise relative motion orthoses to improve proximal interphalangeal joint motion: A survey of Australian hand therapy practice

STUDY DESIGN

Cross-sectional online survey.

INTRODUCTION

Exercise relative motion (RM) orthoses are prescribed by hand therapists to improve finger motion but there is limited scientific evidence to guide practice.

PURPOSE OF THE STUDY

To describe Australian hand therapists' use of exercise RM orthoses to improve PIPJ motion, including trends in orthosis design, prescription, clinical conditions, and their opinions on orthosis benefits and limitations.

METHODS

870 Australian Hand Therapy Association members were sent an electronic survey that included multiple choice, Likert scale and open-ended questions under four subgroups: demographics, design trends, prescription, and therapist opinions. Data analysis consisted of predominantly descriptive statistics and verbatim transcription.

RESULTS

108 Australian therapists completed the survey, over a third with ≥ 20 years of clinical experience. Exercise RM orthoses were prescribed weekly to monthly (82%) for between 2-6 weeks duration (81%) and used during exercise and function (87%). The most common differential MCPJ position was 11-30° extension (98%) or flexion (92%). Four-finger designs were most common for border digits (OR ≥3.4). Exercise RM orthoses were more commonly used for active and extension deficits compared to passive (OR ≥3.7) and flexion deficits (OR ≥1.4), respectively. Clinicians agreed that the orthosis allowed functional hand use (94%), increased non-intentional exercise (98%), and was challenging to use with fluctuating oedema (60%).

DISCUSSION

This survey highlights notable clinical trends despite only reaching a small sample of Australian hand therapists. Exercise RM orthoses were frequently being used for active PIPJ extension and flexion deficits. A common MCPJ differential angle was reported, while the number of fingers incorporated into the design depended on the digit involved. Therapists' preferences mostly agreed with the limited available evidence.

CONCLUSION(S)

This limited survey identified common exercise RM orthosis fabrication and prescription trends amongst Australian therapists. These insights may inform future biomechanical and clinical research on this underexplored topic.

3D-Printed Polycaprolactone Mechanical Characterization and Suitability Assessment for Producing Wrist-Hand Orthoses

In this research, the mechanical properties of 3D-printed polycaprolactone (PCL), a biocompatible and biodegradable semi-crystalline polyester, available as feedstock for additive manufacturing technology based on the material extrusion process, were determined. The influence of the infill pattern (zig-zag vs. gyroid) and ultraviolet (UV-B) exposure over the specimens' mechanical performances were also investigated to gather relevant data on the process parameter settings for different applications. Specimens and samples of 3D-printed PCL were analyzed through tensile and flexural tests. The experimental data showed the good repeatability of the manufacturing process, as well as a mechanical behavior independent of the specimens' infill pattern at full density. No differences between the failure patterns of the tensile specimens were recorded. UV-B exposure proved to have a significant negative impact on the specimens' tensile strength. The 3D printing of PCL and PCL blends is reported mainly for use in scaffold manufacturing or drug delivery applications. As another novelty, the suitability of commercial PCL filaments for producing patient-customized wrist-hand orthoses was also assessed in this study. Semi-cylindrical PCL samples mimicking the forearm part of a wrist-hand orthosis with hexagonal open pockets were 3D-printed and mechanically tested. The results were discussed in comparison to samples with a similar design, made of polylactic acid. The experiments revealed the need to carefully calibrate the manufacturing parameters to generate defect-free, good quality prints. Once settings were established, promising results were obtained when producing orthoses in a ready-to-use form. On the other hand, the attempts to thermoform flat 3D-printed PCL orthoses proved unsuccessful.

The role of therapist-patient relationships in facilitating engagement and adherence in upper extremity rehabilitation

BACKGROUND

Active patient engagement and adherence are essential for successful rehabilitation outcomes, particularly in complex cases such as work-related musculoskeletal injuries. Although the therapist-patient relationship is a significant component of successful care coordination, there has been limited examination of this relationship within upper extremity musculoskeletal rehabilitation.

OBJECTIVE

To explore therapists' perspectives on how the therapist-patient relationship intersects with engagement and adherence in the provision of holistic and collaborative rehabilitation services.

METHODS

Data were collected from four therapists over three months. Descriptive statistics were generated from the Sport Injury Rehabilitation Adherence Scale (SIRAS) and the Rehabilitation Therapy Engagement Scale (RTES) completed by therapists following visits from a sub-sample of patients (n = 14). Weekly semi-structured group interviews (n = 13) were analyzed using an iterative grounded theory-informed process. Emerging themes were identified, refined, and situated within the context of quantitative results.

RESULTS

SIRAS scores averaged 14.4 (SD: 1.0) and RTES scores averaged 42.5 (SD: 3.5), indicating high perceived patient engagement and adherence. Four themes emerged from therapist interviews: (1) dynamic power; (2) co-constructed engagement; (3) emotional states; (4) complementary therapy contexts.

CONCLUSION

In this engaged and adherent setting, therapist-patient relationships were complex and intimate, and extended beyond education and physical interventions. Careful management of this relationship was central to active patient participation and engagement. Incorporating holistic techniques may provide more structure for managing and communicating these aspects of care. These findings provide a preliminary understanding of the impact of therapeutic relationships on engagement and collaborative care.

High baseline pain is associated with treatment adherence in persons diagnosed with thumb base osteoarthritis: An observational study

BACKGROUND

Thumb osteoarthritis (OA) is a common and disabling condition. Adherence to prescribed conservative interventions may affect outcomes of thumb OA trials.

PURPOSE

The aim of the study was to determine whether baseline pain and hand function is associated with treatment adherence over 12 weeks in participants with thumb base OA.

STUDY DESIGN

Observational cohort study nested within a randomized-controlled trial.

METHODS

Ninety-four participants from the intervention group were included in the analysis. Baseline pain and function were assessed using a 100 mm Visual Analogue Scale and the Functional Index for Hand Osteoarthritis questionnaire (0-30), respectively. Participants received a combination of treatments including education, orthosis, hand exercises, and topical anti-inflammatory gel. Adherence was measured using a daily self-reported diary. Participants were classified as non-adherent, partially adherent or fully adherent if they completed none, 1 and/or 2 or all 3 of the interventions as prescribed. Ordinal logistic regression modelling was performed.

RESULTS

At 12-week follow-up, half of the participants were fully adherent to the treatments (n = 46, 48.9%), 30.9% of participants were partially adherent (n = 29) and 20.2% were non-adherent (n = 19, 20.2%). High baseline pain was a significantly associated with better adherence in the unadjusted model [OR = 3.15, 95% CI (1.18, 8.42)] and adjusted model [OR = 3.20, 95% CI (1.13, 8.20)]. Baseline function was not associated with adherence [OR = 1.03, 95% CI (0.47, 2.23)].

CONCLUSION

High baseline pain was associated with better adherence in participants with thumb base OA. Higher baseline functional impairment was not associated with better adherence.

Factors affecting orthosis adherence after acute traumatic hand tendon repairs: A prospective cohort study

INTRODUCTION

Custom-made orthoses are used to prevent contractures and reinjury of tissues such as tendon rupture after traumatic tendon repairs. Despite their wide usage in hand rehabilitation, orthosis adherence is usually an overlooked problem.

PURPOSE OF THE STUDY

This study aims to evaluate the possible factors affecting the orthosis adherence in patients with acute traumatic tendon repairs.

STUDY DESIGN

This is a prospective cohort study.

METHODS

Two hundred twelve patients with acute traumatic hand tendon repair were included in this prospective cohort study. Patients were evaluated on the third day postoperatively and at three weeks. All patients were told to wear their orthosis 24 h a day for three weeks and allowed to take it off to wash the hand carefully once a day. Adherence was measured as fully adherent, partially adherent, and nonadherent. Factors that may affect orthosis adherence were evaluated according to the five dimensions of the multidimensional adherence model including socioeconomic, condition-related, treatment-related, patient-related, and health-care system-related factors. The Modified Hand Injury Severity Scale was used to assess the severity of the injury. Depression and anxiety symptoms were evaluated with the Beck Depression Inventory and Beck Anxiety Inventory. A multivariate logistic regression model was constructed for orthosis adherence.

RESULTS

One hundred thirty-three patients were analyzed. Forty-four (33.1%) patients were fully adherent with the prescribed orthosis, whereas 67 (50.4%) were partially adherent and 22 (16.5%) were nonadherent. Higher depression symptoms caused orthosis nonadherence [odds ratio = 1.2 (95% confidence interval = 1.1-1.3), P = .001] and partial adherence [odds ratio = 1.1 (95% confidence interval = 1.0-1.2), P = .01].

CONCLUSIONS

Among our patients with acute traumatic tendon repair, only one-third of the patients were fully adherent with the orthosis wear program. Depression in the very acute period of injury impaired orthosis adherence.

The effect of rehabilitation education through social media on the quality of life in burn patients: a randomized, controlled, clinical trial

BACKGROUND

Burn is one of the most brutal harms to the human body and mind and its wide-ranging complications have many adverse effects on the patients' quality of life. The present study was conducted to investigate the effect of rehabilitation education through social media on burn patients' quality of life.

METHODS

The present randomized, controlled, clinical trial was conducted on 60 patients admitted to Imam Reza Hospital Burn Center in the city of Mashhad, Iran, who were randomly assigned to either the intervention or control groups (n = 30 per group). The researcher then created a WhatsApp channel to provide educational content and a WhatsApp group for burns patients to join and get their questions answered. The intervention group patients pursued their post-discharge education through the social media for a month. The control group patients received their discharge education according to the ward's routine procedures through pamphlets and face-to-face training by the personnel. As the study's main variable, the Burn Specific Health Scale-Brief was completed by both groups before and 1 and 2 months after the intervention. Data were analyzed using the ANCOVA and repeated-measures ANOVA.

RESULTS

There was no significant differences between the intervention and control groups in terms of the QOL score and any of the domains at baseline. The results indicated the significant effect of the intervention both 1 and 2 months post-intervention on the QOL score and all the domains (P < 0.05), except for body image (P_model1 = .550 and  P_model2 = .463) and skin sensitivity (P_model1 = .333 and P_model2 = .104).

CONCLUSION

The post-discharge rehabilitation education of burns patients through social media improves their quality of life and can be used as an appropriate educational and follow-up method in different stages of the rehabilitation of burn patients. TRIAL REGISTRATION NO. : IRCT20190622043971N1, 05-10-2019.

Do behaviour change techniques increase adherence to home exercises in those with upper extremity musculoskeletal disorders? A systematic review

OBJECTIVES

To investigate whether behaviour change techniques (BCTs) can influence adherence to home exercise in people with upper extremity musculoskeletal disorders (UEMD).

DESIGN

A systematic review of randomised control trials, non-randomised control trials, case-control studies and cohort studies. Results were presented narratively. Participants were those with UEMD. The intervention was any home exercise programme, alongside a BCT designed to increase exercise adherence. Any duration of intervention was accepted. The main outcome sought was adherence to home exercise. A systematic search was performed on four online databases. Grey literature was searched.

RESULTS

The search resulted in 28,755 titles. 77 full-text articles were assessed for eligibility. Six studies were included in the qualitative synthesis. Four studies had Some Concern of Bias, whilst two studies had High Risk of Bias. Three studies found statistically significant differences in exercise adherence (p < 0.05) between the Intervention group and Control group. The BCT 'Social Support (unspecified)' was used within all studies that found significant differences in adherence levels at outcome. However, multiple BCTs were received by the Intervention groups within all studies, making it impossible to identify the effects of any single BCT upon adherence levels.

CONCLUSION

Social support may be relevant in patients' adherence levels to HEPs. However, confidence in the results is uncertain given the small number of studies found, and their High RoB. Future studies should validate their measurement and definition of adherence, as well as the number of BCTs they use, to provide reproducible evidence.

Methods for assessment of patient adherence to removable orthoses used after surgery or trauma to the appendicular skeleton: a systematic review

Background

Patient adherence to treatment is a key determinant of outcome for healthcare interventions. Whilst non-adherence has been well evidenced in settings such as drug therapy, information regarding patient adherence to orthoses, particularly in the acute setting, is lacking. The aim of this systematic review was to identify, summarise, and critically appraise reported methods for assessing adherence to removable orthoses in adults following acute injury or surgery.

Methods

Comprehensive searches of the Ovid versions of MEDLINE, Embase, AMED, CINAHL, Central, the Cochrane Database of Systematic Reviews, and SPORTDiscus identified complete papers published in English between 1990 and September 2018 reporting measurement of adherence to orthoses in adults following surgery or trauma to the appendicular skeleton. Only primary studies with reference to adherence in the title/abstract were included to maintain the focus of the review. Data extraction included study design, sample size, study population, orthosis studied, and instructions for use. Details of methods for assessing adherence were extracted, including instrument/method used, frequency of completion, number of items (if applicable), and score (if any) used to evaluate adherence overall. Validity and reliability of identified methods were assessed together with any conclusions drawn between adherence and outcomes in the study.

Results

Seventeen papers (5 randomised trials, 10 cohort studies, and 2 case series) were included covering upper (n = 13) and lower (n = 4) limb conditions. A variety of methods for assessing adherence were identified, including questionnaires (n = 10) with single (n = 3) or multiple items (n = 7), home diaries (n = 4), and discussions with the patient (n = 3). There was no consistency in the target behaviour assessed or in the timing or frequency of assessment or the scoring systems used. None of the measures was validated for use in the target population.

Conclusions

Measurement and reporting of adherence to orthosis use is currently inconsistent. Further research is required to develop a measurement tool that provides a rigorous and reproducible assessment of adherence in this acute population.

Trial registration

PROSPERO: CRD42016048462. Registered on 17/10/2016.

Effectiveness of interventions to improve therapy adherence in people with upper limb conditions: A systematic review

STUDY DESIGN

Systematic review.

INTRODUCTION

Patient adherence to orthosis wear and/or prescribed exercises improves functional outcome after acute injury and can prevent deformities, contractures, and reinjury of tissues. This is the first systematic review to review the evidence of the effectiveness of interventions to improve treatment adherence in children and adults with acute or chronic upper limb injuries or conditions.

PURPOSE OF THE STUDY

The purpose of this study is to establish the effectiveness of interventions to improve hand therapy adherence in people with upper limb conditions and to report on outcome measures used when reporting adherence.

METHODS

A literature search of MEDLINE (OVID), Embase (OVID), CENTRAL (OVID), CINAHL (EBSCO), and EmCare (OVID) (from inception to March 2017) was undertaken. Studies were selected if they met the following inclusion criteria: clinical trials; in adults or children with any injury or condition affecting the upper limb including acute trauma and injury; chronic and acquired musculoskeletal conditions; and neurological conditions. Two independent assessors rated the study quality and risk of bias using the Cochrane Collaboration tool for assessing the risk of bias.

RESULTS

Eight studies met the inclusion criteria. Study quality ranged from 3 to 6 out of 7 points on the Cochrane risk of bias tool. There were 4 categories of intervention for improving adherence: orthosis/cast material/design; orthosis wear schedule; patient education mode for home exercise programs; and behavioral approaches. Due to heterogeneity of condition acuity, interventions, and outcomes reported, it was not possible to pool the results from all studies. Therefore, a narrative best evidence synthesis was undertaken. There is weak evidence from a very small number of trials that orthosis/cast material has no influence on treatment adherence in acute or chronic conditions and mode of patient education (audio-visual vs written) has no effect in acute conditions. There is low-to-moderate quality of evidence in support of behavioral interventions for achieving treatment adherence in chronic rheumatoid arthritis.

CONCLUSION

Behavioral approaches that encourage self-efficacy are likely to be useful in achieving treatment adherence in populations with chronic upper limb conditions. There is insufficient evidence for other interventions aimed at improving adherence in acute upper limb injuries and conditions.

A survey of client experiences with orthotics using the QUEST 2.0

INTRODUCTION

Hand orthoses are designed to relieve pain, immobilize a body part and protect the injury site, prevent or correct deformity, and promote healing in the body. Practitioners who prescribe and create orthoses are reliant on patient adherence to achieve desired outcomes in treatment. Understanding client preferences may promote better orthotic intervention outcomes.

PURPOSE OF THE STUDY

The purpose of this cross-sectional study was to determine the level of client satisfaction with device characteristics and service provision of custom-fabricated hand orthotics using the Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST) version 2.0 questionnaire.

METHODS

After approval from an institutional review board, participants for this study were obtained through a convenience sample from a hand rehabilitation clinic. Seventy-two participants were administered the QUEST 2.0 to evaluate their satisfaction regarding various aspects of their orthotic devices. The 12 satisfaction categories in the QUEST are dimensions, weight, adjustments, safety, durability, easy to use, comfort, effectiveness, service delivery, repairs/services, professional service, and follow-up service. Each question was scored on a 5-point Likert scale and then recorded in the following 3 sections: device, service, and total score. The mean and standard deviation were calculated for each of the 12 items to determine the primary determinants of orthotic satisfaction.

RESULTS

The top 3 categories for a participant's orthotic device characteristics were comfort (81%), effectiveness (75%), and ease of use (74%). The participants' mean score for the device section was 4.53. The mean service score was 4.71. The total mean score was 4.61.

CONCLUSION

Therapists who are fabricating prescribed orthotic devices for individuals should consider comfort, effectiveness, and ease of use as they fabricate and adjust the device for their client. Identifying the client's desired aspects of the device can help the therapist create a better therapeutic relationship with the client and may improve their overall experience receiving orthotic intervention.

Expanding Self-Management Support From Chronic to Acute Care: Implications for Value

In this article, I advocate the expansion of self-management support from chronic to acute care as a means of increasing the value of services and highlighting the value of occupational therapy. Like people with chronic conditions, clients with acute conditions (1) need to participate in their own care, (2) require support for participation, (3) engage in care outside of traditional medical behaviors, and (4) benefit from a focus of care that extends beyond discrete episodes. Self-management support can facilitate adherence, promote holistic conceptualizations of health, and address long-term outcomes and costs. Given that self-management support aligns with occupational therapy’s philosophical roots, expansion of self-management support to acute care highlights the profession’s contribution to health promotion in this practice area.

Design of an Orthopedic Product by Using Additive Manufacturing Technology: The Arm Splint

The traditional fabrication process of custom-made splints has hardly undergone any progress since the beginning of its use at the end of the eighteenth century. New manufacturing techniques and the new materials can help to modernize this treatment method of fractures. The use of Additive Manufacturing has been proposed in recent years as an alternative process for the manufacture of splints and there has been an increase in public awareness and exploration. For this reason, in this study a splint model printed in 3D, that replaces the deficiencies of the cast maintaining its virtues, has been proposed. The proposed methodology is based on three-dimensional digitalization techniques and 3D modeling with reverse engineering software. The work integrates different scientific disciplines to achieve its main goal: to improve life quality of the patient. In addition, the splint has been designed based on the principles of sustainable development. The design of splint is made of Polycarbonate by technique of Additive Manufacturing with fused deposition manufacturing, and conceived with organic shapes, customizing openings and closing buttons with rubber. In this preliminary study the final result is a prototype of the 3D printed arm splint in a reduced scale by using PLA as material.

Commentary: Rehabilitation for Rural and Remote Residents Following a Traumatic Hand Injury

A traumatic hand injury can involve damage to a number of structures including skin, nerves, tendons, muscle bone, and soft tissue. Impairments such as pain or stiffness and loss of range of motion can last for many years and result in a moderate to extreme impact on a person’s day-to-day life. Work, leisure, financial security, and emotional well-being often most affected. This commentary provides an analysis of those factors that inhibit (barriers) and support (enablers) the provision of hand therapy rehabilitation in rural and remote areas. Providing a collaborative and flexible rehabilitation programme to rural and remote residents following a traumatic hand injury can be seen as a challenge due to issues such as a limited access to health care services. Established protocols that work in regional or metropolitan locations are unlikely to be effective and innovative and pragmatic strategies are required. The provision of a collaborative and flexible rehabilitation programme regardless of residential location is an important part of the therapist’s intervention plan.

Adherence behavior in an acute pediatric hand trauma population: A pilot study of parental report of adherence levels and influencing factors

INTRODUCTION

Descriptive and cross-sectional study.

PURPOSE OF THE STUDY

The hand is a common site of injury in children; however, little is known regarding adherence to hand trauma management in this population.

PURPOSE

This pilot study aimed to describe adherence to plaster slab immobilization, advice regarding return to sport, appointment attendance, and the factors influencing nonadherence.

METHOD

Forty-seven parents of children with hand trauma completed an online questionnaire reporting their child's adherence to the initial medical management.

RESULTS

Parents reported that 34% (16 of 47) of children were adherent to all aspects of management. Nonadherence with plaster slab immobilization was reported by 38% (18 of 47), and 45% (21 of 47) reported nonadherence with advice regarding return to sport. Hygiene, discomfort, and restriction were the most common reasons for plaster removal. Belief that sport would not cause harm and social factors influenced return to sport against medical advice.

CONCLUSION

Nonadherence behavior is commonly reported in children with acute hand trauma.

LEVEL OF EVIDENCE

4.

Social and community participation following spinal cord injury: a critical review

Evaluation of rehabilitation outcomes following acquired disability should include participation in social and community life. Evidence is needed to guide clinical practice to ensure that it is client-centered; therefore, findings from studies that report on social and community participation following spinal cord injury (SCI) need to be reviewed and synthesized. The objectives of this critical literature review are to examine the available evidence on social and community participation following SCI and to examine the factors that influence that participation. The barriers and facilitators will be identified and described in terms of the contextual factors - personal or environmental, as outlined by the International Classification of Functioning, Disability and Health. An additional objective is to appraise the quality of the evidence examined. A systematic literature search was completed in the databases OVID MEDLINE, AMED, CINAHL PLUS, PSYCHINFO, and hand searches were carried out. Quantitative, qualitative, and mixed methods studies were included. Twenty-three studies fulfilled the inclusion criteria: 17 quantitative, five qualitative, and one mixed methods. In general, studies were of low methodological quality, and no intervention studies were identified. The terms participation, social participation, and community participation were used interchangeably often without clarification of meaning. Adequate personal care assistance, appropriate social support, having adequate specialized equipment, and appropriate occupational therapy input were found to facilitate social and community participation, whereas problems with transport, inaccessibility of the natural and built environment, issues with healthcare services and rehabilitation providers, and pain were identified as barriers. In-depth investigation into what aspects of social and community participation are important to those living with SCI is needed so that client-focused solutions and interventions can be identified and developed, aimed at creating and promoting opportunities for social and community participation.

Interventions to aid patient adherence to physiotherapist prescribed self-management strategies: a systematic review

BACKGROUND

Physiotherapist prescribed self-management strategies are an important adjunct to 'hands on' treatment. However, treatment outcomes are likely to be related to whether patients adhere to the prescribed strategy. Therefore, physiotherapists should be aware of adherence aiding interventions designed to maximise patient outcomes underpinned by quality research studies.

OBJECTIVE

To conduct a systematic review of the interventions used to aid patient adherence to all physiotherapist prescribed self-management strategies.

DATA SOURCES

The search included the databases CINAHL, EMBASE, MEDLINE, PUBMED, PSYCINFO, SPORTSDiscus, the Cochrane Central Register of Controlled Trials, PEDro and Mednar for randomised controlled trials (RCTs) published in a peer reviewed journal from inception to November 2014.

DATA EXTRACTION AND SYNTHESIS

Data were extracted using a standardised form from twelve included RCTs for patient adherence rates to self-management strategies for interventions used to aid patient adherence and usual care. Two independent reviewers conducted methodological quality assessment.

RESULTS

Twelve different interventions to aid patient adherence to exercise were recorded from twelve fair to high quality RCTs. Potential adherence aiding interventions include an activity monitor and feedback system, written exercise instructions, behavioural exercise programme with booster sessions and goal setting.

CONCLUSION AND IMPLICATIONS OF KEY FINDINGS

Despite a number of studies demonstrating interventions to positively influence patient adherence to exercise, there is insufficient data to endorse their use in clinical practice. No RCTs examining adherence aiding interventions to self-management strategies other than exercise were identified, indicating a significant gap in the literature.

SYSTEMATIC REVIEW REGISTRATION NUMBER

PROSPERO CRD42015014516.

Does a DVD improve compliance with home exercise programs for people who have sustained a traumatic hand injury? Results of a feasibility study

PURPOSE

This feasibility study sought to determine if compliance and understanding of a home exercise program following a traumatic hand injury is improved when patients are provided with a DVD and a brochure when compared to using brochures only.

METHOD

Patients who presented with a traumatic hand injury and commenced on a hand therapy protocol were randomly assigned into two groups. The control group received brochures while the experimental group were provided with exercise instructions on DVD as well as brochures. Compliance was measured through the use of exercise diaries, clinic attendance, a checklist to measure correctness and understanding of exercises and a follow-up survey.

RESULTS

No significant improvement was found in the mean exercise compliance score (p = 0.344) between the intervention and control groups. From the survey results almost half of all participants reported that pain interfered in their ability to perform their home exercises and a third acknowledged that time limited their ability to perform their exercises.

CONCLUSION

Findings demonstrate the multidimensional nature of compliance. The provision of DVD technology, while not shown to cause a statistically significant change in overall compliance, did help improve understanding of exercises; as such DVDs could be utilised as part of a program that facilitates the patient--therapist relationship.

IMPLICATIONS FOR REHABILITATION

Limited time and level of pain are highlighted as reasons for non compliance with exercise and treatment programs. The use of DVDs can improve understanding and execution of exercises and can be part of a treatment program that facilitates increased patient therapist contact for rural and remote clients.