The Risk Factors that Can Increase Possibility of Mandibular Canal Wall Damage in Adult: A Cone-Beam Computed Tomography (CBCT) Study in a Chinese Population

Investigation of the relationship between the mandibular third molar teeth and the inferior alveolar nerve using posteroanterior radiographs: a pilot study

BACKGROUND

The most severe complication that can occur after mandibular third molar (MM3) surgery is inferior alveolar nerve (IAN) damage. It is crucial to have a comprehensive radiographic evaluation to reduce the possibility of nerve damage. The objective of this study is to assess the diagnostic accuracy of panoramic radiographs (PR) and posteroanterior (PA) radiographs in identifying the association between impacted MM3 roots and IAN.

METHODS

This study included individuals who had PR, PA radiographs, and cone beam computed tomography (CBCT) and who had at least one impacted MM3. A total of 141 impacted MM3s were evaluated on CBCT images, and the findings were considered gold standard. The relationship between impacted MM3 roots and IAN was also evaluated on PR and PA radiographies. The data was analyzed using the McNemar and Chi-squared tests. The sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and diagnostic accuracy of PR and PA radiographies were determined.

RESULTS

Considering CBCT the gold standard, the relationship between MM3 roots and IAN was found to be statistically significant between PR and CBCT (p = 0.00). However, there was no statistically significant relationship between PA radiography and CBCT (0.227). The study revealed that the most prevalent limitation of the PR in assessing the relationship between MM3 roots and IAN was the identification of false-positive relationship.

CONCLUSIONS

PA radiography may be a good alternative in developing countries to find out if there is a contact between MM3 roots and IAN because it is easier to get to, cheaper, and uses less radiation.

The Influence of Slice Thickness, Sharpness, and Contrast Adjustments on Inferior Alveolar Canal Segmentation on Cone-Beam Computed Tomography Scans: A Retrospective Study

This retrospective study aims to investigate the impact of cone-beam computed tomography (CBCT) viewing parameters such as contrast, slice thickness, and sharpness on the identification of the inferior alveolar nerve (IAC). A total of 25 CBCT scans, resulting in 50 IACs, were assessed by two investigators using a three-score system (good, average, and poor) on cross-sectional images. Slice thicknesses of 0.25 mm, 0.5 mm, and 1 mm were tested, along with varying sharpness (0, 6, 8, and 10) and contrast (0, 400, 800, and 1200) settings. The results were statistically analyzed to determine the optimal slice thickness for improved visibility of IAC, followed by evaluating the influence of sharpness and contrast using the optimal thickness. The identified parameters were then validated by performing semi-automated segmentation of the IACs and structure overlapping to evaluate the mean distance. Inter-rater and intra-rater reliability were assessed using Kappa statistics, and inferential statistics used Pearson's Chi-square test. Inter-rater and intra-rater reliability for all parameters were significant, ranging from 69% to 83%. A slice thickness of 0.25 mm showed consistently "good" visibility (80%). Sharpness values of zero and contrast values of 1200 also demonstrated high frequencies of "good" visibility. Overlap analysis resulted in an average mean distance of 0.295 mm and a standard deviation of 0.307 mm across all patients' sides. The study revealed that a slice thickness of 0.25 mm, zero sharpness value, and higher contrast value of 1200 improved the visibility and accuracy of IAC segmentation in CBCT scans. The individual patient's characteristics, such as anatomical variations, decreased bone density, and absence of canal walls cortication, should be considered when using these parameters.

Cone-Beam Computed Tomography Analysis on the Relationship between the Mandibular Third Molar and the Position of the Mandibular Canal in Koreans from the Yanbian Area and the Han People

OBJECTIVE

To analyze differences in the positional relationships between the mandibular third molar (MTM) and the mandibular canal in Korean and Han patients using cone-beam computed tomography (CBCT) and to provide a basis for preoperative risk assessments.

MATERIALS AND METHODS

The CBCT imaging data of 260 Korean and Han patients were collected. The patients' genders, ages, impaction types and depths, relative positions between the MTMs and the mandibular nerve canals, and the shortest distances and shapes at the root tips and cortical bones were all recorded and analyzed. All data were compared using the nonparametric test, ordered logistic regression analysis, a chi-square test, and Fisher's exact test.

RESULTS

The relationship between the mandibular canal and the relative position of the MTM differed between Korean and Han patients, mainly in the different types of impactions, and the difference was statistically significant (P < 0.05). The shortest distance between the mesioangular and horizontally impacted mandibular canals and the buccal side of the MTM in Korean patients was less than in Han patients, and the difference was statistically significant (P < 0.05). For horizontal impactions, the probability of cortical bone interruption was 1.980 times greater in Korean patients than in Han patients, and the difference was statistically significant (P < 0.05). The significance threshold was set at 0.05.

CONCLUSION

There are some differences in the positional relationship between the mandibular canal in the MTM region and the rate of cortical bone disruption between Koreans from the Yanbian area and the Hans. This should gain clinical attention.

The Radiological Evaluation of Mandibular Canal Related Variables in Mandibular Third Molar Region: a Retrospective Multicenter Study

OBJECTIVES

The aim of this retrospective study was to investigate anatomical structure of mandibular canal and the factors those increase the possibility of inferior alveolar nerve damage in mandibular third molar region of Turkish population.

MATERIAL AND METHODS

Overall 320 participants with 436 mandibular third molars were included from four different study centers. Following variables were measured: type and depth of third molar impaction, position of mandibular canal in relation to third molars, morphology of mandibular canal, cortication status of mandibular canal, possible contact between the third molars and mandibular canal, thickness and density of superior, buccal, and lingual mandibular canal wall, bucco-lingual and apico-coronal mandibular canal diameters on cone-beam computed tomography scans.

RESULTS

Lingual mandibular canal wall density and thickness were decreased significantly as the impaction depth of mandibular third molar was increased (P = 0.045, P = 0.001 respectively). Highest buccal mandibular canal wall density and thickness were observed in lingual position of mandibular canal in relation to mandibular third molar (P = 0.021, P = 0.034 respectively). Mandibular canal with oval/round morphology had higher apico-coronal diameter in comparison to tear drop and dumbbell morphologies (P = 0.018). Additionally, mandibular canals with observed cortication border and no contact with mandibular third molar had denser and thicker lingual mandibular canal wall (P = 0.003, P = 0.001 respectively).

CONCLUSIONS

Buccal and lingual mandibular canal wall density, thickness and mandibular canal diameter may be related with high-risk indicators of inferior alveolar nerve injury.

Comparison of Digital OPG and CBCT in Assessment of Risk Factors Associated with Inferior Nerve Injury during Mandibular Third Molar Surgery

Background: Pre-operative radiographic assessment of the anatomical relationship between the roots of the mandibular third molar and the inferior alveolar nerve (IAN) is a must to minimize the risk of IAN injury during surgery. Objectives: To compare the radiographic signs of digital orthopantomogram (OPG) and cone-beam computed tomography (CBCT). An additional objective was to assess the cortex status between the mandibular canal and third molar on CBCT images in relation to the demographic characteristics, region (right or left side), and angulation of mandibular molar. Methodology: In this retrospective study, a total of 350 impacted mandibular third molars with a close relationship between the inferior alveolar canal (IAC) and impacted mandibular third molars on digital OPG were further referred for CBCT imaging for assessment of the position of the mandibular canal. The study was conducted between August 2018 and February 2020. Digital OPGs were evaluated for radiographic signs like interruption of the mandibular canal wall, darkening of the roots, diversion of the mandibular canal, and narrowing of the mandibular canal. The age and sex of patients, site of impacted third molar, Winter’s classification of mandibular third molar, position of IAC relative to impacted molar, and the radiographic markers of OPG were assessed for cortical integrity using CBCT. Chi square testing was applied to study the values of difference and binomial logistic regression was done to assess the factors associated with cortication. Statistical significance was set at p ≤ 0.05. Results: Among 350 patients, 207 (59.1%) were male and 143 (40.9%) were female with a mean age of 36.8 years. The most common OPG sign was interruption of white line, seen in 179 (51.1%) cases. In total, 246 cases (70.3%) showed an absence of canal cortication between the mandibular canal and the impacted third molar on CBCT images. Cortication was observed in all cases with a combination of panoramic signs which was statistically significant (p = 0.047). Cortication was observed in 85 (50.6%) cases where IAC was positioned on the buccal side, 11 (16.9%) in cases of inferiorly positioned IAC, and just 8 (7.6%) for cases of lingually positioned IAC which was statistically significant (p = 0.003). Statistically insignificant (p > 0.05) results were noted for cortex status in CBCT images with regards to the age, sex, site, and angulation of impacted third molars. Conclusion: CBCT imaging is highly recommended for those cases where diversion of the mandibular canal is observed on OPG and when the roots are present between canals.

Does a preoperative cone beam CT reduce complication rates in the surgical removal of complex lower third molars? A retrospective study including 486 cases

BACKROUND

This study was designed to analyse the value of preoperative Cone Beam CTs (CBCT) prior to the surgical removal of complex lower third molars. Furthermore, the aim was to assess injuries to the inferior alveolar nerve (IAN) bundle and postoperative neurological disorders depending on the position of the lower third molar and the inferior alveolar nerve bundle.

METHODS

In this retrospective examination preoperative Cone Beam CTs and Orthopantomographs (OPT) of 324 patients were analysed concerning the location of the lower third molars in relation to the mandible and the inferior alveolar nerve bundle. Surgery protocols of all patients who underwent the surgical removal of at least one complex lower third molar were analysed concerning patient data, length of surgery, intraoperative haemorrhage, intraoperative exposure of the inferior alveolar nerve bundle, postoperative swelling and postoperative neurological disorders. The data was then compared to data from international studies.

RESULTS

In all 324 patients a permanent neurological damage was not found. Temporary neurological damage was recorded in 13 cases (2.6%). A caudal nerve position with no measurable distance to the root of the lower third molar was associated with the highest risk of a temporal neurological damage. A vestibular touching nerve route also correlated with postoperative sensitivity impairment. If a mesioangulation (Winter) or a Pell and Gregory Type IIIC appears in the OPT, risk of neurological damage is at its highest.

CONCLUSIONS

Three-dimensional radiographic imaging, in our patient group, does not significantly affect the risk for complications during the surgical removal of complex lower third molars. Therefore, it should only be utilized for risk assessment, especially in cases of symptom-free lower third molars. A preoperative orthopantomogram still can be accepted as standard for radiographic imaging. An intraoperative exposure of the IAN bundle does not necessarily predict simultaneous neurological damage. Exposure of the IAN bundle is no indication for a discontinuation of the surgery.

Preoperative Anatomic Evaluation of the Relationship Between Inferior Alveolar Nerve Canal and Impacted Mandibular Third Molar in a Population of Bhubaneswar, Odisha, Using CBCT: A Hospital-Based Study

Purpose

To evaluate the correlation between the position of inferior alveolar nerve canal and the angulation of impacted mandibular third molars using cone beam computed tomography (CBCT) in a hospital-based study in the state of Odisha, India.

Materials and Methodology

Three hundred cases of impacted third molars in 200 patients (154 males; 46 females) were included in the study, for whom an initial periapical or panoramic radiograph had revealed that the mandibular canal and the lower third molars were in close proximity. A CBCT scan of each patient was carried out to assess how the canal position influenced the class and position of impaction, angulation of impaction and bone contact.

Results

Class II position B impactions were found in 78.37% cases where the position of ID canal was approximate to the lingual plate and inferior to third molar (73.75%). The results were statistically significant (p = 0.00). 80% of the ID canals showed bone contact. Of these 73.75% ID canals showed lingual bone contact. Mesioangular impactions were most common in mandible and significantly associated with lingual and inferior positioning of the canal.

Conclusions

The study mostly exhibited patients having mesioangular class II position B third molar impactions of the mandible. The position of the canal has a significant influence on the type of impaction and the bone contact.

Association between impacted third molars and position of the mandibular canal: a morphological analysis using cone-beam computed tomography

Our aim was to assess the association between the angle of impaction of the third molar and the position of the mandibular canal on cone-beam computed tomography (CT). We designed a retrospective study of 100 cone-beam CT images of 173 mandibular third molars that were obtained between January 2012 and December 2015, and recorded the angle of impaction of the third molar, the position of the mandibular canal in relation to the impacted tooth, and the potential contact between the roots of the tooth and the mandibular canal. Most third molars tilted mesially (n=33), while the mandibular canal was positioned below the roots of the third molar in most cases (n=73). Contact between the two was most likely when the mandibular canal was between (RR=1.49; 95% CI 1.27 to 1.75, p<0.001), or to the lingual side (RR=1.49; 95% CI 1.27 to 1.75, p<0.001) of the roots of the tooth. These outcomes indicate a greater likelihood of contact between the canal and the roots when the canal is between, and to the lingual side, of the roots. We found no association between the angle of impaction and the position of the canal. These findings illustrate the importance of surgical planning using complementary imaging tests such as cone-beam CT.