Preparation and Characterization of Water-in-Oil-in-Water Emulsions Containing a High Concentration of L -Ascorbic Acid

Analytics and applications of polyglycerol polyricinoleate (PGPR)-Current research progress

Polyglycerol polyricinoleate (PGPR) is a synthetic food additive containing a complex mixture of various esters. In recent years, there has been a growing trend to use PGPR-stabilized water-in-oil (W/O) emulsions to replace fat in order to produce low-calorie food products. In this respect, it is essential to comprehensively characterize the PGPR molecular species composition, which might enable to reduce its required amount in emulsions and foods based on a better understanding of the structure-activity relationship. This review presents the recent research progress on the characterization and quantitative analysis of PGPR. The influencing factors of the emulsifying ability of PGPR in W/O emulsions are further illustrated to provide new insights on the total or partial replacement of PGPR. Moreover, the latest progress on applications of PGPR in food products is described. Current studies have revealed the complex structure of PGPR. Besides, recent research has focused on the quantitative determination of the composition of PGPR and the quantification of the PGPR concentration in foods. However, research on the quantitative determination of the (poly)glycerol composition of PGPR and of the individual molecular species present in PGPR is still limited. Some natural water- or oil-soluble surfactants (e.g., proteins or lecithin) have been proven to enable the partial replacement of PGPR in W/O emulsions. Additionally, water-dispersible phytosterol particles and lecithin have been successfully used as a substitute of PGPR to create stable W/O emulsions.

Optimisation of food grade mixed surfactant-based l-ascorbic acid nanoemulsions using response surface methodology

Co‐surfactant free l‐ascorbic acid (LAA) nanoemulsions were prepared using mixed surfactants (Soya lecithin and Tween 80). Response surface methodology (RSM) was used to optimise the emulsifying conditions for LAA nanoemulsions. The effects of water proportion (6%–14% w/w), homogenisation pressure (80–160 MPa), surfactant concentrations (4%–12% w/w) and laa concentration (0.5–1.3 w/w) on responses (size of droplets and nanoemulsion stability) were investigated. RSM results showed that the values of responses can be successfully predicted through second‐order polynomial model. The coefficients of determinations for droplet size and nanoemulsion stability were 0.9375 and 0.9027, respectively. The optimum preparation conditions for l‐LAA nanoemulsion were 9.04% water proportion, 114.48 MPa homogenisation pressure, 7.36% surfactant concentration and 1.09% LAA concentration. At the end of one month storage study, the retention of LAA in optimised nanoemulsions stored at 4°C and 25°C were 74.4% and 66.7%, respectively. These results may provide valuable contributions for food and pharmaceutical industry to develop delivery system for food additives and nutraceutical components.

Segregation of Tetragenococcus halophilus and Zygosaccharomyces rouxii using W1/O/W2 double emulsion for use in mixed culture fermentation

Antagonism in mixed culture fermentation can result in undesirable metabolic activity and negatively affect the fermentation process. Water-oil-water (W₁/O/W₂) double emulsions (DE) could be utilized in fermentation for segregating multiple species and controlling their release and activity. Zygosaccharomyces rouxii and Tetragenococcus halophilus, two predominant microbial species in soy sauce fermentation, were incorporated in the internal W₁ and external W₂ phase of a W₁/O/W₂, respectively. The suitability of DE for controlling T. halophilus and Z. rouxii in soy sauce fermentation was studied in relation to emulsion stability and microbial release profile. The effects of varying concentrations of Z. rouxii cells (5 and 7logCFU/mL) and glucose (0%, 6%, 12%, 30% w/v) in the W₂ phase were investigated. DE stability was determined by monitoring encapsulation stability (%), oil globule size, and microstructure with fluorescence and optical microscopy. Furthermore, the effect of DE on the interaction between T. halophilus and Z. rouxii was studied in Tryptic Soy Broth containing 10% w/v NaCl and 12% w/v glucose and physicochemical changes (glucose, ethanol, lactic acid, and acetic acid) were monitored. DE destabilization resulted in cell release which was proportional to the glucose concentration in W₂. Encapsulated Z. rouxii presented higher survival during storage (~3 log). The application of DE affected microbial cells growth and physiology, which led to the elimination of antagonism. These results demonstrate the potential use of DE as a delivery system of mixed starter cultures in food fermentation, where multiple species are required to act sequentially in a controlled manner.

Physicochemical properties and encapsulation of silicon in double emulsions for healthier food applications

This article analyses the potential use of double emulsions as silicon delivery systems with reference to the influence of the composition of the inner aqueous phase (W₁, containing NaCl and sodium caseinate or gelatin) on silicon encapsulation and physicochemical properties of food-grade W₁/O/W₂. Irrespective of W₁, DEs initially showed a well-defined monomodal distribution, with the widest range registering in the sample with gelatin. All samples developed a bimodal distribution during storage (3 ± 2 °C). Heating increased the range of droplet size distribution. DEs exhibited high physical stability (creaming), decreasing over storage; this behaviour was generally unaffected by W₁ composition, which maintained similar stability (95-96%) at the end of storage. Viscosity was generally unaffected by formulation, storage time or heating treatment. Si encapsulation efficiency (72.4 and 78.3%) was not affected by W₁ composition, while Si encapsulation stability was generally unaffected by either storage or heating. These DEs can be used as potential ingredient (with lower fat content, better fatty acid profile and with the potential Si health benefits) for the development of healthier foods including meat products.

Monodisperse aqueous microspheres encapsulating high concentration of l-ascorbic acid: insights of preparation and stability evaluation from straight-through microchannel emulsification

Stabilization of l-ascorbic acid (l-AA) is a challenging task for food and pharmaceutical industries. The study was conducted to prepare monodisperse aqueous microspheres containing enhanced concentrations of l-AA by using microchannel emulsification (MCE). The asymmetric straight-through microchannel (MC) array used here constitutes 11 × 104 μm microslots connected to a 10 μm circular microholes. 5–30% (w/w) l-AA was added to a Milli-Q water solution containing 2% (w/w) sodium alginate and 1% (w/w) magnesium sulfate, while the continuous phase constitutes 5% (w/w) tetraglycerol condensed ricinoleate in water-saturated decane. Monodisperse aqueous microspheres with average diameters (dav) of 18.7–20.7 μm and coefficients of variation (CVs) below 6% were successfully prepared via MCE regardless of the l-AA concentrations applied. The collected microspheres were physically stable in terms of their dav and CV for >10 days of storage at 40°C. The aqueous microspheres exhibited l-AA encapsulation efficiency exceeding 70% during the storage.

Modulating the release of drugs from alginate matrices with the addition of gelatin microbeads

Injectable drug-loaded matrices and controlled release technology offer numerous advantages over conventional dosages. Cross-linkable alginate hydrogels have been proposed for in vivo injection, but their large initial burst release of encapsulated drugs represents a limitation for the transition to the clinical phase. To reduce this effect, a new drug delivery system was prepared by combining uncross-linked, drug-loaded gelatin microbeads with cross-linkable alginate solution. Gelatin microbeads ranging from 5 to 50 µm were obtained depending on gelatin concentration, stirring rate, and emulsifying time. The release behavior of drug-loaded gelatin microbeads encapsulated within cross-linked alginate gel was characterized both at room temperature and 37°C and compared with the release from gelatin microbeads and cross-linked alginate gel alone. Gelatin microbeads reduced the initial burst release of fluorescein from cross-linked alginate matrix, with a corresponding decrease in the release efficiency. Burst release in the first 2 h was reduced from 30% to about 5%, while cumulative release at 37°C declined from about 95% to 50% after 7 days. This system represents a promising approach for the development of novel and versatile injectable drug delivery systems.