Nucleotide sequence of the Clostridium stercorarium xynA gene encoding xylanase A: identification of catalytic and cellulose binding domains

Genomic analysis of Paenibacillus macerans strain I6, which can effectively saccharify oil palm empty fruit bunches under nutrient-free conditions

The improper disposal of palm oil industrial waste has led to serious environmental pollution. In this study, we isolated Paenibacillus macerans strain I6, which can degrade oil palm empty fruit bunches generated by the palm oil industry in nutrient-free water, from bovine manure biocompost and sequenced its genome on PacBio RSII and Illumina NovaSeq 6000 platforms. We obtained 7.11 Mbp of genomic sequences with 52.9% GC content from strain I6. Strain I6 was phylogenetically closely related to P. macerans strains DSM24746 and DSM24 and was positioned close to the head of the branch containing strains I6, DSM24746, and DSM24 in the phylogenetic tree. We used the RAST (rapid annotation using subsystem technology) server to annotate the strain I6 genome and discovered genes related to biological saccharification; 496 genes were related to carbohydrate metabolism and 306 genes were related to amino acids and derivatives. Among them were carbohydrate-active enzymes (CAZymes), including 212 glycoside hydrolases. Up to 23.6% of the oil palm empty fruit bunches was degraded by strain I6 under anaerobic and nutrient-free conditions. Evaluation of the enzymatic activity of extracellular fractions of strain I6 showed that amylase and xylanase activity was highest when xylan was the carbon source. The high enzyme activity and the diversity in the associated genes may contribute to the efficient degradation of oil palm empty fruit bunches by strain I6. Our results indicate the potential utility of P. macerans strain I6 for lignocellulosic biomass degradation.

Contributions and characteristics of two bifunctional GH43 β-xylosidase /α-L-arabinofuranosidases with different structures on the xylan degradation of Paenibacillus physcomitrellae strain XB

Xylan is one of the major polymeric hemicellulosic constituents of lignocellulosic biomass, and its effective utilization by microorganisms is crucial for the economical production of biofuels. In this study, Paenibacillus physcomitrellae XB exhibited different xylan degradation ability on different substrates of corncob xylan (CCX), oat spelt xylan (OSX), wheat flour arabinoxylan (AX) and beech wood xylan (BWX). The RT-QPCR result showed that two genes (Pph_0602 and Pph_2344) belonging to the glycoside hydrolase family 43 were up-regulated more than 5-fold on CCX and xylose. Substrate-specific assays with purified proteins Ppxyl43A (Pph_0602) and Ppxyl43B (Pph_2344) revealed that both exhibited β-xylosidase activity toward the chromogenic substrate p-nitrophenyl-β-D-xylopyranoside, and α-L-arabinofuranosidase activity toward p-nitrophenyl-α-L-arabinofuranoside, indicating their bifunctionality. By testing their degradation characteristics on different natural substrates, it was found that both Ppxyl43A and Ppxyl43B showed similar degradation ability on CCX and OSX. Both enzymes could hydrolyze xylohexaose and xylobiose completely to xylose, but could not hydrolyze BWX and AX, suggesting they mainly hydrolyze xylo-oligosaccharides by β-xylosidase activity. Further analysis showed that both of them displayed very high pH stability and thermostability on the β-xylosidase activity, but Ppxy143B exhibited wider pH and temperature ranges, higher pH and temperature stability, was less influenced by metal ions, and had a slower start-up response than Ppxyl43A. Given their predicted structure, it is likely that the enzymatic differences between Ppxyl43A and Ppxyl43B might be related to the extra C-terminus domain (GH43_C2) in Ppxyl43B, which could enhance the enzymatic stability while restricting the substrates' or metal ions' access to the active sites of Ppxyl43B. In conclusion, both Ppxyl43A and Ppxyl43B were β-xylosidase/α-L-arabinofuranosidase bifunctional enzymes and might be useful in xylan biomass conversion, especially in the hydrolysis of xylo-oligosaccharides into xylose.

Optimization of the Cellulase Free Xylanase Production by Immobilized Bacillus Pumilus

Background

The extracellular xylanase secreted by microorganisms is a hydrolytic enzyme, which arbitrarily cleaves the β-1, 4 backbone of the polysaccharide xylan; an enzyme used in the food processing, bio-pulping and bio-bleaching. The commercial production of the xylanase is limited because of a higher cost involvement, which can be overcome by the cost-effective production of the xylanase through immobilization of the microbial cell by the non-toxic substances.

Objectives

In this work, the optimization of the extra-cellular cellulase free xylanase production by the immobilized cell of the Bacillus pumilus IMAU80221 strain using Ca-alginate beads along with standardization of the various parameters for a higher xylanase production were studied.

Materials and Methods

Following to sterilization, the Na-alginate solution was mixed with the bacterial suspension of the Bacillus pumilus IMAU80221 and was added drop by drop into the 1 M calcium chloride solution for 1 h for obtaining a uniform sized polymeric bead of the Ca-alginate. For xylanase production, the Ca-alginate beads were then transferred into 100 mL Erlenmeyer flasks with 20 mL of the culture medium containing (w/v) 0.02% NaCl, 0.02% MgSO₄, 0.04% (KH₄)₂PO₄, 0.1% peptone, and 0.5% xylan and incubated at 34 °C in an incubator shaker (150 rpm) for 24 h. The resultant supernatant (crude enzyme) was used for enzyme assay.

Results

The maximum xylanase production by the free cell (1.9 U.mL^-1.min^-1) was recorded at 48 h which was 40.5% lower than the xylanase production by the immobilized cell (2.67 U.mL^-1.min^-1) at the same time. The beads containing the immobilized cells could be reused up to eight fermentation cycles for xylanase production and retained 83.5% of the productivity at the fourth cycle. The entrapped cells were stable after six months of storage at 4 °C and retained 68% of the xylanase productivity.

Conclusion

Cellulase free xylanase production from the immobilized Bacillus pumilus IMAU80221 was optimized. The xylanase production by the immobilized cells of Bacillus pumilus was higher by 40.5 and 132.6 % over the free cells respectively after 48 and 72 h of the incubation.

The hemicellulose-degrading enzyme system of the thermophilic bacterium Clostridium stercorarium: comparative characterisation and addition of new hemicellulolytic glycoside hydrolases

BACKGROUND

The bioconversion of lignocellulosic biomass in various industrial processes, such as the production of biofuels, requires the degradation of hemicellulose. Clostridium stercorarium is a thermophilic bacterium, well known for its outstanding hemicellulose-degrading capability. Its genome comprises about 50 genes for partially still uncharacterised thermostable hemicellulolytic enzymes. These are promising candidates for industrial applications.

RESULTS

To reveal the hemicellulose-degrading potential of 50 glycoside hydrolases, they were recombinantly produced and characterised. 46 of them were identified in the secretome of C. stercorarium cultivated on cellobiose. Xylanases Xyn11A, Xyn10B, Xyn10C, and cellulase Cel9Z were among the most abundant proteins. The secretome of C. stercorarium was active on xylan, β-glucan, xyloglucan, galactan, and glucomannan. In addition, the recombinant enzymes hydrolysed arabinan, mannan, and galactomannan. 20 enzymes are newly described, degrading xylan, galactan, arabinan, mannan, and aryl-glycosides of β-d-xylose, β-d-glucose, β-d-galactose, α-l-arabinofuranose, α-l-rhamnose, β-d-glucuronic acid, and N-acetyl-β-d-glucosamine. The activities of three enzymes with non-classified glycoside hydrolase (GH) family modules were determined. Xylanase Xyn105F and β-d-xylosidase Bxl31D showed activities not described so far for their GH families. 11 of the 13 polysaccharide-degrading enzymes were most active at pH 5.0 to pH 6.5 and at temperatures of 57-76 °C. Investigation of the substrate and product specificity of arabinoxylan-degrading enzymes revealed that only the GH10 xylanases were able to degrade arabinoxylooligosaccharides. While Xyn10C was inhibited by α-(1,2)-arabinosylations, Xyn10D showed a degradation pattern different to Xyn10B and Xyn10C. Xyn11A released longer degradation products than Xyn10B. Both tested arabinose-releasing enzymes, Arf51B and Axh43A, were able to hydrolyse single- as well as double-arabinosylated xylooligosaccharides.

CONCLUSIONS

The obtained results lead to a better understanding of the hemicellulose-degrading capacity of C. stercorarium and its involved enzyme systems. Despite similar average activities measured by depolymerisation tests, a closer look revealed distinctive differences in the activities and specificities within an enzyme class. This may lead to synergistic effects and influence the enzyme choice for biotechnological applications. The newly characterised glycoside hydrolases can now serve as components of an enzyme platform for industrial applications in order to reconstitute synthetic enzyme systems for complete and optimised degradation of defined polysaccharides and hemicellulose.

SACCHARIS: an automated pipeline to streamline discovery of carbohydrate active enzyme activities within polyspecific families and de novo sequence datasets

BACKGROUND

Deposition of new genetic sequences in online databases is expanding at an unprecedented rate. As a result, sequence identification continues to outpace functional characterization of carbohydrate active enzymes (CAZymes). In this paradigm, the discovery of enzymes with novel functions is often hindered by high volumes of uncharacterized sequences particularly when the enzyme sequence belongs to a family that exhibits diverse functional specificities (i.e., polyspecificity). Therefore, to direct sequence-based discovery and characterization of new enzyme activities we have developed an automated in silico pipeline entitled: Sequence Analysis and Clustering of CarboHydrate Active enzymes for Rapid Informed prediction of Specificity (SACCHARIS). This pipeline streamlines the selection of uncharacterized sequences for discovery of new CAZyme or CBM specificity from families currently maintained on the CAZy website or within user-defined datasets.

RESULTS

SACCHARIS was used to generate a phylogenetic tree of a GH43, a CAZyme family with defined subfamily designations. This analysis confirmed that large datasets can be organized into sequence clusters of manageable sizes that possess related functions. Seeding this tree with a GH43 sequence from Bacteroides dorei DSM 17855 (BdGH43b, revealed it partitioned as a single sequence within the tree. This pattern was consistent with it possessing a unique enzyme activity for GH43 as BdGH43b is the first described α-glucanase described for this family. The capacity of SACCHARIS to extract and cluster characterized carbohydrate binding module sequences was demonstrated using family 6 CBMs (i.e., CBM6s). This CBM family displays a polyspecific ligand binding profile and contains many structurally determined members. Using SACCHARIS to identify a cluster of divergent sequences, a CBM6 sequence from a unique clade was demonstrated to bind yeast mannan, which represents the first description of an α-mannan binding CBM. Additionally, we have performed a CAZome analysis of an in-house sequenced bacterial genome and a comparative analysis of B. thetaiotaomicron VPI-5482 and B. thetaiotaomicron 7330, to demonstrate that SACCHARIS can generate "CAZome fingerprints", which differentiate between the saccharolytic potential of two related strains in silico.

CONCLUSIONS

Establishing sequence-function and sequence-structure relationships in polyspecific CAZyme families are promising approaches for streamlining enzyme discovery. SACCHARIS facilitates this process by embedding CAZyme and CBM family trees generated from biochemically to structurally characterized sequences, with protein sequences that have unknown functions. In addition, these trees can be integrated with user-defined datasets (e.g., genomics, metagenomics, and transcriptomics) to inform experimental characterization of new CAZymes or CBMs not currently curated, and for researchers to compare differential sequence patterns between entire CAZomes. In this light, SACCHARIS provides an in silico tool that can be tailored for enzyme bioprospecting in datasets of increasing complexity and for diverse applications in glycobiotechnology.

Novel Trifunctional Xylanolytic Enzyme Axy43A from Paenibacillus curdlanolyticus Strain B-6 Exhibiting Endo-Xylanase, β-d-Xylosidase, and Arabinoxylan Arabinofuranohydrolase Activities

The axy43A gene encoding the intracellular trifunctional xylanolytic enzyme from Paenibacillus curdlanolyticus B-6 was cloned and expressed in Escherichia coli Recombinant PcAxy43A consisting of a glycoside hydrolase family 43 and a family 6 carbohydrate-binding module exhibited endo-xylanase, β-xylosidase, and arabinoxylan arabinofuranohydrolase activities. PcAxy43A hydrolyzed xylohexaose and birch wood xylan to release a series of xylooligosaccharides, indicating that PcAxy43A contained endo-xylanase activity. PcAxy43A exhibited β-xylosidase activity toward a chromogenic substrate, p-nitrophenyl-β-d-xylopyranoside, and xylobiose, while it preferred to hydrolyze long-chain xylooligosaccharides rather than xylobiose. In addition, surprisingly, PcAxy43A showed arabinoxylan arabinofuranohydrolase activity; that is, it released arabinose from both singly and doubly arabinosylated xylose, α-l-Araf-(1→2)-d-Xylp or α-l-Araf-(1→3)-d-Xylp and α-l-Araf-(1→2)-[α-l-Araf-(1→3)]-β-d-Xylp Moreover, the combination of PcAxy43A and P. curdlanolyticus B-6 endo-xylanase Xyn10C greatly improved the efficiency of xylose and arabinose production from the highly substituted rye arabinoxylan, suggesting that these two enzymes function synergistically to depolymerize arabinoxylan. Therefore, PcAxy43A has the potential for the saccharification of arabinoxylan into simple sugars for many applications. IMPORTANCE In this study, the glycoside hydrolase 43 (GH43) intracellular multifunctional endo-xylanase, β-xylosidase, and arabinoxylan arabinofuranohydrolase (AXH) from P. curdlanolyticus B-6 were characterized. Interestingly, PcAxy43A AXH showed a new property that acted on both the C(O)-2 and C(O)-3 positions of xylose residues doubly substituted with arabinosyl, which usually obstruct the action of xylanolytic enzymes. Furthermore, the studies here show interesting properties for the processing of xylans from cereal grains, particularly rye arabinoxylan, and show a novel relationship between PcAxy43A and endo-xylanase Xyn10C from strain B-6, providing novel metabolic potential for processing arabinoxylans into xylose and arabinose.

Carbohydrate-binding modules influence substrate specificity of an endoglucanase from Clostridium thermocellum

Most cellulases contain carbohydrate-binding modules (CBMs) that largely contribute to their activity for insoluble substrates. Clostridium thermocellum Cel5E is an endoglucanase having xylanolytic activity. The Cel5E originally has a family 11 CBM preferentially binding to β-1,4- and β-1,3-1,4-mixed linkage glucans. In this study, we replaced the CBM with a different type of CBM, either a family 3 microcrystalline cellulose-directed CBM from Clostridium josui scaffoldin, or a family 6 xylan-directed CBM from Clostridium stercorarium xylanase 11A. Chimeric endoglucanases showed enhanced activity that was affected by CBM binding specificity. These chimeric enzymes could efficiently degrade milled lignocellulosic materials, such as corn hulls, because of heterologous components in the plant cell wall, indicating that diverse CBMs play roles in degradation of lignocellulosic materials.

A Novel Thermophilic Pectate Lyase Containing Two Catalytic Modules ofClostridium stercorarium

The Clostridium stercorarium F-9 pel9A gene encodes a pectate lyase Pel9A consisting of 1,240 amino acids with a molecular weight of 135,171. The mature form of Pel9A is a modular enzyme composed of two family-9 catalytic modules of polysaccharide lyases, CM9-1 and CM9-2, in order from the N terminus. Pel9A showed an overall sequence similarity to the hypothetical pectate lyase PelX of Bacillus halodurans (sequence identity 53%), and CM9-2 showed moderate sequence similarities to some pectate lyases of family 9. Sequence identity between CM9-1 and CM9-2 was 21.3%. The full-length Pel9A lacking the N-terminal signal peptide was expressed, purified, and characterized. The enzyme required Ca(2+) ion for its enzyme activity and showed high activity toward polygalacturonic acid but lower activity toward pectin, indicating that Pel9A is a pectate lyase. Immunological analysis using an antiserum raised against the purified enzyme indicated that Pel9A is constitutively synthesized by C. stercorarium F-9.

Cloning, expression and characteristics of a novel alkalistable and thermostable xylanase encoding gene (Mxyl) retrieved from compost-soil metagenome

Background

The alkalistable and thermostable xylanases are in high demand for pulp bleaching in paper industry and generating xylooligosaccharides by hydrolyzing xylan component of agro-residues. The compost-soil samples, one of the hot environments, are expected to be a rich source of microbes with thermostable enzymes.

Methodology/Principal Findings

Metagenomic DNA from hot environmental samples could be a rich source of novel biocatalysts. While screening metagenomic library constructed from DNA extracted from the compost-soil in the p18GFP vector, a clone (TSDV-MX1) was detected that exhibited clear zone of xylan hydrolysis on RBB xylan plate. The sequencing of 6.321 kb DNA insert and its BLAST analysis detected the presence of xylanase gene that comprised 1077 bp. The deduced protein sequence (358 amino acids) displayed homology with glycosyl hydrolase (GH) family 11 xylanases. The gene was subcloned into pET28a vector and expressed in E. coli BL21 (DE3). The recombinant xylanase (rMxyl) exhibited activity over a broad range of pH and temperature with optima at pH 9.0 and 80°C. The recombinant xylanase is highly thermostable having T1/2 of 2 h at 80°C and 15 min at 90°C.

Conclusion/Significance

This is the first report on the retrieval of xylanase gene through metagenomic approach that encodes an enzyme with alkalistability and thermostability. The recombinant xylanase has a potential application in paper and pulp industry in pulp bleaching and generating xylooligosaccharides from the abundantly available agro-residues.

Characterization of Xyn30A and Axh43A of Bacillus licheniformis SVD1 identified by its genomic analysis

The genome sequence of Bacillus licheniformis SVD1, that produces a cellulolytic and hemi-cellulolytic multienzyme complex, was partially determined, indicating that the glycoside hydrolase system of this strain is highly similar to that of B. licheniformis ATCC14580. All of the fifty-six genes encoding glycoside hydrolases identified in B. licheniformis ATCC14580 were conserved in strain SVD1. In addition, two new genes, xyn30A and axh43A, were identified in the B. licheniformis SVD1 genome. The xyn30A gene was highly similar to Bacillus subtilis subsp. subtilis 168 xynC encoding for a glucuronoarabinoxylan endo-1,4-β-xylanase. Xyn30A, produced by a recombinant Escherichia coli, had high activity toward 4-O-methyl-D-glucurono-D-xylan but showed definite activity toward oat-spelt xylan and unsubstituted xylooligosaccharides. Recombinant Axh43A, consisting of a family-43 catalytic module of the glycoside hydrolases and a family-6 carbohydrate-binding module (CBM), was an arabinoxylan arabinofuranohydrolase (α-L-arabinofuranosidase) classified as AXH-m23 and capable of releasing arabinosyl residues, which are linked to the C-2 or C-3 position of singly substituted xylose residues in arabinoxylan or arabinoxylan oligomers. The isolated CBM polypeptide had an affinity for soluble and insoluble xylans and removal of the CBM from Axh43A abolished the catalytic activity of the enzyme, indicating that the CBM plays an essential role in hydrolysis of arabinoxylan.

GH11 xylanases: Structure/function/properties relationships and applications

For technical, environmental and economical reasons, industrial demands for process-fitted enzymes have evolved drastically in the last decade. Therefore, continuous efforts are made in order to get insights into enzyme structure/function relationships to create improved biocatalysts. Xylanases are hemicellulolytic enzymes, which are responsible for the degradation of the heteroxylans constituting the lignocellulosic plant cell wall. Due to their variety, xylanases have been classified in glycoside hydrolase families GH5, GH8, GH10, GH11, GH30 and GH43 in the CAZy database. In this review, we focus on GH11 family, which is one of the best characterized GH families with bacterial and fungal members considered as true xylanases compared to the other families because of their high substrate specificity. Based on an exhaustive analysis of the sequences and 3D structures available so far, in relation with biochemical properties, we assess biochemical aspects of GH11 xylanases: structure, catalytic machinery, focus on their "thumb" loop of major importance in catalytic efficiency and substrate selectivity, inhibition, stability to pH and temperature. GH11 xylanases have for a long time been used as biotechnological tools in various industrial applications and represent in addition promising candidates for future other uses.

Two Extremely Thermostable Xylanases of the Hyperthermophilic Bacterium Thermotoga maritima MSB8

During growth with xylose or xylan as the source of carbon, xylanase production by Thermotoga maritima MSB8 was enhanced about 10-fold compared with growth with glucose or starch. Two extremely thermostable endoxylanases (1,4-(beta)-d-xylan-xylanohydrolase, EC 3.2.1.8), designated XynA and XynB, were identified and purified from cells of this organism. XynA and XynB occurred as proteins with apparent molecular masses of about 120 and 40 kDa, respectively, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Maximum activity at the optimal pH (pH 6.2 and pH 5.4 for XynA and XynB, respectively) was measured at about 92(deg)C for XynA (10-min assay) and at about 105(deg)C for XynB (5-min assay). XynB activity was stimulated twofold by the addition of 500 mM NaCl, while XynA displayed maximum activity without the addition of salt. Both xylanases were tolerant of relatively high salt concentrations. At 2 M (about 12% wt/vol) NaCl, XynA and XynB retained 49 and 65%, respectively, of their maximum activities. In contrast to XynB, XynA was able to adsorb to microcrystalline cellulose. Antibodies raised against a recombinant truncated XynA protein cross-reacted with XynB, indicating that the enzymes may have sequence or structural similarities. Part of the xylanase activity appeared to be associated with the outer membrane of T. maritima cells, since more than 40% of the total xylanase activity present in the crude cellular extract was found in the membrane fraction after high-speed centrifugation. Most of the membrane-bound activity appeared to be due to the 120-kDa xylanase XynA.

Xyn11A, a multidomain multicatalytic enzyme fromPseudobutyrivibrio xylanivorans Mz5T

The rumen bacterium Pseudobutyrivibrio xylanivorans Mz5T has a potent xylanolytic enzyme system. A small native peptide (approximately 30-kDa, designated Xyn11A) from the bacterium was first isolated and characterized by Edman degradation. The gene coding for Xyn11A was identified using PCR amplification with consensus primers. It was then fully sequenced to reveal an open reading frame of 1809 bp. The predicted N-terminal domain exhibited xylanolytic activity and was classed to the family 11 of glycosyl hydrolases; it is followed by a region with homology to a family 6 cellulose binding module. The C-terminal domain codes for a putative NodB-like polysaccharide deacetylase which is predicted to be an acetyl esterase implicated in debranching activity in the xylan backbone. As similar domain organization was also found in several other xylanases from a diverse range of bacteria, a common ancestor of such a xylanase is considered to be present and spread, possibly by horizontal gene transfer, to other microorganisms from different ecological niches.

Degenerate oligonucleotide gene shuffling (DOGS) and random drift mutagenesis (RNDM): Two complementary techniques for enzyme evolution

Improvement of the biochemical characteristics of enzymes has been aided by misincorporation mutagenesis and DNA shuffling. Many gene shuffling techniques result predominantly in the regeneration of unshuffled (parental) molecules. We describe a procedure for gene shuffling using degenerate primers that allows control of the relative levels of recombination between the genes that are shuffled, and reduces the regeneration of unshuffled parental genes. This shuffling procedure avoids the use of endonucleases for gene fragmentation prior to shuffling and allows the inclusion of random mutagenesis of selected portions of the chimeric genes as part of the procedure. We illustrate the use of the shuffling technique with a family of beta-xylanase genes that possess widely different G+C contents. In addition, we introduce a new method (RNDM) for rapid screening of mutants from libraries where no adaptive selection has been imposed on the cells. They are identified only by their retention of enzymatic activity. The combination of RNDM followed by DOGS allows a comprehensive exploration of a protein's functional sequence space.

Isolation and expression of the xynB gene and its product, XynB, a consistent component of the Clostridium cellulovorans cellulosome

The nucleotide sequence of the Clostridium cellulovorans xynB gene, which encodes the XynB xylanase, consists of 1,821 bp and encodes a protein of 607 amino acids with a molecular weight of 65,976. XynB contains a typical N-terminal signal peptide of 29 amino acid residues, followed by a 147-amino-acid sequence that is homologous to the family 4-9 (subfamily 9 in family 4) carbohydrate-binding domain. Downstream of this domain is a family 10 catalytic domain of glycosyl hydrolase. The C terminus separated from the catalytic domain by a short linker sequence contains a dockerin domain responsible for cellulosome assembly. The XynB sequence from mass spectrometry and N-terminal amino acid sequence analyses agreed with that deduced from the nucleotide sequence. XynB was highly active toward xylan, but not active toward carboxymethyl cellulose. The enzyme was optimally active at 40 degrees C and pH 5.0. Northern hybridizations revealed that xynB is transcribed as a monocistronic 1.9-kb mRNA. RNA ligase-mediated rapid amplification of 5' cDNA ends by PCR (RLM-5'RACE PCR) analysis of C. cellulovorans RNA identified a single transcriptional start site of xynB located 47 bp upstream from the first nucleotide of the translation initiation codon. Alignment of the xynB promoter region provided evidence for highly conserved sequences that exhibited strong similarity to the sigmaA consensus promoter sequences of gram-positive bacteria. Expression of xynB mRNA increased from early to middle exponential phase and decreased during the early stationary phase when the cells were grown on cellobiose. No alternative promoter was observed by RLM-5'RACE PCR and reverse transcriptase PCR analyses during expression. The analysis of the products from xylan hydrolysis by thin-layer chromatography indicated its endoxylanase activity. The results suggest that XynB is a consistent and major cellulosomal enzyme during growth on cellulose or xylan.

Characteristics of a cluster of xylanase genes in Fibrobacter succinogenes S85

Xylanase genes xyn10D, xyn10E, and xyn10B, located sequentially on the Fibrobacter succinogenes S85 chromosome, were separately cloned and their properties characterized. Analysis of the sequences documented that xylanases Xyn10D, Xyn10E, and Xyn10B each consist of an N-terminal catalytic domain (glycosyl hydrolase family 10) and a C-terminal carbohydrate-binding module (CBM, family 6) connected by proline-rich linker sequences. The amino acid sequences exhibited similarities of between 53 and 60%. The xyn10D, xyn10E, and truncated xyn10deltaACBM were expressed in Escherichia coli and purified to homogeneity. The purified Xyn10D, Xyn10E, and Xyn10BdeltaCBM exhibited the same temperature optimum (40 degrees C) and pH optimum (6.5) and the highest specific activity against arabinoxylan, oat spelt xylan, and birchwood xylan, respectively. Xyn10D exhibited an affinity for cellulose and xylan with 47 and 33% binding, respectively, while the truncated Xyn10DdeltaCBM did not bind to the substrates. The main hydrolysis products of the three xylanases acting on oat spelt xylan and arabinoxylan were xylose and xylobiose. RT-PCR analysis showed that the three genes were co-transcribed as a single transcript. Western immunoblot analysis revealed that the three xylanases were expressed at a very low level by F. succinogenes grown on either glucose or cellulose as the source of carbohydrate.

Xylanase and acetyl xylan esterase activities of XynA, a key subunit of the Clostridium cellulovorans cellulosome for xylan degradation

The Clostridium cellulovorans xynA gene encodes the cellulosomal endo-1,4-beta-xylanase XynA, which consists of a family 11 glycoside hydrolase catalytic domain (CD), a dockerin domain, and a NodB domain. The recombinant acetyl xylan esterase (rNodB) encoded by the NodB domain exhibited broad substrate specificity and released acetate not only from acetylated xylan but also from other acetylated substrates. rNodB acted synergistically with the xylanase CD of XynA for hydrolysis of acetylated xylan. Immunological analyses revealed that XynA corresponds to a major xylanase in the cellulosomal fraction. These results indicate that XynA is a key enzymatic subunit for xylan degradation in C. cellulovorans.

The endoxylanases from family 11: computer analysis of protein sequences reveals important structural and phylogenetic relationships

Eighty-two amino acid sequences of the catalytic domains of mature endoxylanases belonging to family 11 have been aligned using the programs MATCHBOX and CLUSTAL. The sequences range in length from 175 to 233 residues. The two glutamates acting as catalytic residues are conserved in all sequences. A very good correlation is found between the presence (at position 100) of an asparagine in the so-called 'alkaline' xylanases, or an aspartic acid in those with a more acidic pH optimum. Four boxes defining segments of highest similarity were detected; they correspond to regions of defined secondary structure: B5, B6, B8 and the carboxyl end of the alpha helix, respectively. Cysteine residues are not common in these sequences (0.7% of all residues), and disulfide bridges are not important in explaining the stability of several thermophilic xylanases. The alignment allows the classification of the enzymes in groups according to sequence similarity. Fungal and bacterial enzymes were found to form mostly separate clusters of higher similarity.

Duplicated binding sites for (1-->3)-beta-D-glucan in the horseshoe crab coagulation factor G: implications for a molecular basis of the pattern recognition in innate immunity

The horseshoe crab factor G, a heterodimeric serine protease zymogen, is activated by (1-->3)-beta-D-glucan on fungal cell walls. The activation initiates the hemolymph-clotting cascade, a critical reaction for the defense against microorganisms. In the present study, we identified the domain responsible for the glucan recognition by factor G and characterized its interaction with (1-->3)-beta-d-glucan and its derivatives. Among three domains in subunit alpha of factor G, identified as the glucan-binding domain, was the COOH-terminal xylanase Z-like domain composed of two tandem-repeating units, each of which exhibits sequence similarities to the cellulose-binding domains of bacterial xylanases. Each of the single units bound to the glucan with lower affinities, and the association constant increased two orders with the tandem-repeating structure (K(a) = 8.0 x 10(8) m(-1)). In addition to longer glucans, (1-->3)-beta-D-glucan oligosaccharides incapable of activating factor G bound also to factor G and competitively inhibited the zymogen activation. The minimum structure required for the binding was a (1-->3)-beta-d-glucan disaccharide, indicating that conformation-dependent structures are not essential for the recognition. Therefore, increasing avidity by multivalent binding sites with low affinities to simple structures on biologically active polymers may be one of the principles that allows stable and specific recognition of pathogens by pattern recognition receptors in innate immunity.

Co-operative binding of triplicate carbohydrate-binding modules from a thermophilic xylanase

Family 6 carbohydrate-binding modules were amplified by polymerase chain reaction (PCR) from Clostridium stercorarium strain NCIB11754 genomic DNA as a triplet. Individually, these modules bound to xylooligosaccharides and cellooligosaccharides with affinities varying from approximately 3 x 10(3) M(-1) to approximately 1 x 10(5) M(-1). Tandem and triplet combinations of these modules bound co-operatively to soluble xylan and insoluble cellulose to give approximately 20- to approximately 40-fold increases in affinity relative to the individual modules. This co-operativity was an avidity effect resulting from the modules within the tandems and triplet interacting simultaneously with proximal binding sites on the polysaccharides. This occurred by both intrachain and interchain interactions. The duplication or triplication of modules appears to be linked to the growth temperature of the organism; co-operativity in these multiplets may compensate for the loss of affinity at higher temperatures.

Characterization of xylanolytic enzymes in Clostridium cellulovorans: expression of xylanase activity dependent on growth substrates

Xylanase activity of Clostridium cellulovorans, an anaerobic, mesophilic, cellulolytic bacterium, was characterized. Most of the activity was secreted into the growth medium when the bacterium was grown on xylan. Furthermore, when the extracellular material was separated into cellulosomal and noncellulosomal fractions, the activity was present in both fractions. Each of these fractions contained at least two major and three minor xylanase activities. In both fractions, the pattern of xylan hydrolysis products was almost identical based on thin-layer chromatography analysis. The major xylanase activities in both fractions were associated with proteins with molecular weights of about 57,000 and 47,000 according to zymogram analyses, and the minor xylanases had molecular weights ranging from 45,000 to 28,000. High alpha-arabinofuranosidase activity was detected exclusively in the noncellulosomal fraction. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis revealed that cellulosomes derived from xylan-, cellobiose-, and cellulose-grown cultures had different subunit compositions. Also, when xylanase activity in the cellulosomes from the xylan-grown cultures was compared with that of cellobiose- and cellulose-grown cultures, the two major xylanases were dramatically increased in the presence of xylan. These results strongly indicated that C. cellulovorans is able to regulate the expression of xylanase activity and to vary the cellulosome composition depending on the growth substrate.

Degenerate oligonucleotide gene shuffling (DOGS): a method for enhancing the frequency of recombination with family shuffling

Improvement of the biochemical characteristics of enzymes has been aided by misincorporation mutagenesis and DNA shuffling. Shuffling techniques can be used on a collection of mutants of the same gene, or related families of genes can be shuffled to produce mutants encoding chimeric gene products. One difficulty with current shuffling procedures is the predominance of unshuffled ("parental") molecules in the pool of mutants. We describe a procedure for gene shuffling using degenerate primers that allows control of the relative levels of recombination between the genes that are shuffled and reduces the regeneration of unshuffled parental genes. This procedure has the advantage of avoiding the use of endonucleases for gene fragmentation prior to shuffling and allows the use of random mutagenesis of selected segments of the gene as part of the procedure. We illustrate the use of the technique with a diverse family of beta-xylanase genes that possess widely different G+C contents.

The thermostabilizing domain of the modular xylanase XynA of Thermotoga maritima represents a novel type of binding domain with affinity for soluble xylan and mixed-linkage beta-1,3/beta-1, 4-glucan

Thermotoga maritima XynA is an extremely thermostable modular enzyme with five domains (A1-A2-B-C1-C2). Its catalytic domain (-B-) is flanked by duplicated non-catalytic domains. The C-terminal repeated domains represent cellulose-binding domains (CBDs). Xylanase domains related to the N-terminal domains of XynA (A1-A2) are called thermostabilizing domains because their deletion normally leads to increased thermosensitivity of the enzymes. It was found that a glutathione-S-transferase (GST) hybrid protein (GST-A1A2) containing both A-domains of XynA can interact with various soluble xylan preparations and with mixed-linkage beta-1,3/beta-1,4-glucans. GST-A1A2 showed no affinity for insoluble microcrystalline cellulose, whereas, vice versa, GST-C2, which contains the C-terminal CBD of XynA, did not interact with soluble xylan. Another hybrid protein, GST-A2, displayed the same binding properties as GST-A1A2, indicating that A2 alone can also promote xylan binding. The dissociation constants for the binding of xylose, xylobiose, xylotriose, xylotetraose and xylopentaose by GST-A2, as determined at 20 degrees C by fluorescence quench experiments, were 8.1 x 10(-3) M, 2.3 x 10(-4) M, 2.3 x 10(-5) M, 2.5 x 10(-6)M and 1.1 x 10(-6) M respectively. The A-domains of XynA, which are designated as xylan binding domains (XBD), are, from the structural as well as the functional point of view, prototypes of a novel class of binding domains. More than 50 related protein segments with hitherto unknown function were detected in about 30 other multidomain beta-glycanases, among them putative plant (Arabidopsis thaliana) xylanases. It is argued that polysaccharide binding and not thermostabilization is the main function of A-like domains.

Cellulase-free xylanases from Bacillus and other microorganisms

Xylanases are used mainly in the pulp and paper industries for the pretreatment of Kraft pulp prior to bleaching to minimize use of chlorine, the conventional bleaching agent. This application has great potential as an environmentally safe method. Hydrolysis by xylanases of relocated and reprecipitated xylan on the surface of cellulose fibres formed during Kraft cooking facilitates the removal of lignin by increasing permeability to oxidising agents. Most of the xylanases reported in the literature contained significant cellulolytic activity, which make them less suitable for pulp and paper industries. The need for large quantities of xylanases which would be stable at higher temperatures and pH values and free of cellulase activity has necessitated a search for novel enzymes. We have isolated and characterised several xylanase-producing cultures, one of which (an alkalophilic Bacillus SSP-34) produced more than 100 IU ml(-1) of xylanase activity. The SSP-34 xylanases have optimum activity at 50 degrees C in a pH range 6-8, with only small amounts of cellulolytic activity (CMCase (0.4 IU ml(-1), pH 7), FPase (0.2 IU ml(-1), pH 7) and no activity at pH 9).

Molecular and biotechnological aspects of xylanases

Hemicellulolytic microorganisms play a significant role in nature by recycling hemicellulose, one of the main components of plant polysaccharides. Xylanases (EC 3.2.1.8) catalyze the hydrolysis of xylan, the major constituent of hemicellulose. The use of these enzymes could greatly improve the overall economics of processing lignocellulosic materials for the generation of liquid fuels and chemicals. Recently cellulase-free xylanases have received great attention in the development of environmentally friendly technologies in the paper and pulp industry. In microorganisms that produce xylanases low molecular mass fragments of xylan and their positional isomers play a key role in regulating its biosynthesis. Xylanase and cellulase production appear to be regulated separately, although the pleiotropy of mutations, which causes the elimination of both genes, suggests some linkage in the synthesis of the two enzymes. Xylanases are found in a cornucopia of organisms and the genes encoding them have been cloned in homologous and heterologous hosts with the objectives of overproducing the enzyme and altering its properties to suit commercial applications. Sequence analyses of xylanases have revealed distinct catalytic and cellulose binding domains, with a separate non-catalytic domain that has been reported to confer enhanced thermostability in some xylanases. Analyses of three-dimensional structures and the properties of mutants have revealed the involvement of specific tyrosine and tryptophan residues in the substrate binding site and of glutamate and aspartate residues in the catalytic mechanism. Many lines of evidence suggest that xylanases operate via a double displacement mechanism in which the anomeric configuration is retained, although some of the enzymes catalyze single displacement reactions with inversion of configuration. Based on a dendrogram obtained from amino acid sequence similarities the evolutionary relationship between xylanases is assessed. In addition the properties of xylanases from extremophilic organisms have been evaluated in terms of biotechnological applications.

Cloning and characterization of the polyhydroxybutyrate depolymerase gene of Pseudomonas stutzeri and analysis of the function of substrate-binding domains

The extracellular polyhydroxybutyrate (PHB) depolymerase gene (phaZPst) of Pseudomonas stutzeri was cloned and sequenced. phaZPst was composed of 1,728 bp encoding a protein of 576 amino acids. Analyses of the N-terminal amino acid sequence and the matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) mass spectrum of the purified enzyme showed that the mature enzyme consisted of 538 amino acids with a deduced molecular mass of 57,506 Da. Analysis of the deduced amino acid sequence of the protein revealed a domain structure containing a catalytic domain, putative linker region, and two putative substrate-binding domains (SBDI and SBDII). The putative linker region was similar to the repeating units of the cadherin-like domain of chitinase A from Vibrio harveyi and chitinase B from Clostridium paraputrificum. The binding characteristics of SBDs to poly([R]-3-hydroxybutyrate) [P(3HB)] and chitin granules were characterized by using fusion proteins of SBDs with glutathione S-transferase (GST). These GST fusion proteins with SBDII and SBDI showed binding activity toward P(3HB) granules but did not bind on chitin granules. It has been suggested that the SBDs of the depolymerase interact specifically with the surface of P(3HB). In addition, a kinetic analysis for the enzymatic hydrolysis of 3-hydroxybutyrate oligomers of various sizes has suggested that the catalytic domain of the enzyme recognizes at least two monomeric units as substrates.

Cloning, sequencing and expression of the cDNA of endoxylanase B from Penicillium purpurogenum

The cDNA for xylanase B from Penicillium purpurogenum was cloned and sequenced. This DNA encodes a protein of 208 amino acids which is expected to yield a protein of 183 residues upon processing of the N terminus. The sequence of the predicted protein is very similar to that of 40 other xylanase domains which belong to family G of cellulases/xylanases (73-21% identity).

Structure of the Clostridium stercorarium gene celY encoding the exo-1,4-beta-glucanase Avicelase II

The nucleotide sequence of the celY gene coding for the thermostable exo-1,4-beta-glucanase Avicelase II of Clostridium stercorarium was determined. The gene consists of an ORF of 274Z bp which encodes a preprotein of 914 amino acids with a molecular mass of 103 kDa. The signal-peptide cleavage site was identified by comparison with the N-terminal amino acid sequence of Avicelase II purified from C stercorarium. The celY gene is located in close vicinity to the celZ gene coding for the endo-1,4-beta-glucanase Avicelase I. The CelY-encoding sequence was isolated from genomic DNA of C. stercorarium with the PCR technique. The recombinant enzyme produced in Escherichia coli as a LacZ'-CelY fusion protein could be purified using a simple two-step procedure. The properties of CelY proved to be consistent with those of Avicelase II purified from C. stercorarium. Sequence comparison revealed that CelY consists of an N-terminal catalytic domain flanked by a domain of 95 amino acids with unknown function joined to a type III cellulose-binding domain. The catalytic domain belongs to the recently proposed family L of cellulases (family 48 of glycosyl hydrolases).

Hemicellulases in the bleaching of chemical pulps

Hemicellulase-aided bleaching is the first full-scale biotechnical application in the pulp and paper industry which truly exploits the unique specificity and safety of biocatalysts. Hemicellulases are used to modify the structure of xylan and glucomannan in pulp fibers in order to enhance the chemical delignification. This technology can be combined with various types of kraft pulping processes and bleaching sequences. The aims of the enzymatic treatment depend on the actual mill conditions, and may be related to environmental demands, reduction of chemical costs, or maintenance or even improvement of product quality. The technology is applied on the mill scale in several countries. This review describes the principles of the enzyme-aided bleaching, the composition of the fiber substrates, the basic enzymology involved, and the present knowledge of the mechanisms of the action of enzymes, as well as the practical results and advantages obtained on the laboratory and industrial scale.

Purification and characterization of two low molecular mass alkaline xylanases from Fusarium oxysporum F3

Two low molecular mass endo-1,4-beta-D-xylanases from Fusarium oxysporum were purified to homogeneity by gel-filtration and ion-exchange chromatography. They exhibit molecular masses of 20.8 (xylanase I) and 23.5 (xylanase II) kDa, and isoelectric points of 9.5 and 8.45-8.70, respectively. Both xylanases display remarkable pH (9.0) stability. At 40 to 55 degrees C xylanase II is more thermostable than xylanase I but less active on xylan. In contrast to xylanase I, xylanase II is able to hydrolyze 1-O-4-methylumbelliferyl-beta-D-glucopyranosyl)-beta-D-xylopyranoside (muxg). Neither of these enzymes hydrolyze xylotriose. They bind on crystalline cellulose but not on insoluble xylan. Analysis of reaction mixtures by high pressure liquid chromatography revealed that both enzymes cleave preferentially the internal glycosidic bonds of xylopentaose and oat spelts xylan. Thus the purified enzymes appeared to be true endo-beta-1,4-xylanases. The amino terminal sequences of xylanases I and II show to homology. Xylanase I shows high similarity with alkaline low molecular mass xylanases of family G/11.

Cloning and characterization of the gene for the thermostable xylanase XynA from Thermomyces lanuginosus

A thermostable xylanase from the filamentous fungus Thermomyces lanuginosus (DSM 5826) was purified. This enzyme has an apparent molecular weight of 24-26 kDa as determined by SDS polyacrylamide gel electrophoresis. cDNA and genomic DNA fragments coding for this enzyme were cloned and sequenced. The cDNA contains an open reading frame encoding a polypeptide of 225 amino acids and was functionally expressed in E. coli as a LacZ fusion protein. Comparison of the cDNA sequence with the genomic DNA sequence showed that the xylanase was encoded by two exons interrupted by an intron of 106 bp. Comparison of the deduced amino acid sequence to other published xylanases revealed high homology to xylanases of the family G glycanases.

Cloning, sequencing and analysis of the ggh-A gene encoding a 1,4-beta-D-glucan glucohydrolase from Microbispora bispora

The ggh-A gene, encoding a 1,4-beta-D-glucan glucohydrolase/beta-glucosidase, of Microbispora bispora (Mb) was subcloned and expressed from a 4.0-kb XhoI DNA fragment. The nucleotide sequence of this fragment was determined. Analysis of the sequence revealed one open reading frame (ORF) which encodes a 986-amino-acid (aa) protein with a calculated molecular weight of 107,510. The ggh-A ORF has features typical of an actinomycete gene including high GC content (70.5%) and corresponding biased codon usage. Comparison of the aa sequence of the Mb 1,4-beta-D-glucan glucohydrolase (Mbggh-A) with other glycosidases reveals high overall homology to several beta-glucosidases and a 1,4-beta-D-glucan glucohydrolase belonging to the glycosyl hydrolase family 3. The aa sequence alignments of Mbggh-A and beta-glucosidases show that the active site region potentially involves two Asp residues. The aa sequence homology studies revealed a potential two-domain structure for Mbggh-A and other beta-glucosidases. Furthermore, Mbggh-A has localized homology to a cellulose-binding domain present in some xylanases. This report is significant, as, to date, 1,4-beta-D-glucan glucohydrolases have rarely been reported, though they are assumed to have a critical role in cellulolysis.

Biochemical properties of a beta-xylosidase from Clostridium cellulolyticum

A 43-kDa beta-xylosidase from Clostridium cellulolyticum was purified to homogeneity. The enzyme releases xylose from p-nitrophenylxylose and xylodextrins with a degree of polymerization ranging between 2 and 5. The N-terminal amino acid sequence of the enzyme showed homologies with three other bacterial beta-xylosidases. By proton nuclear magnetic resonance spectroscopy, the enzyme was found to act by inverting the beta-anomeric configuration.

Evidence for a general role for non-catalytic thermostabilizing domains in xylanases from thermophilic bacteria

A genomic library of Clostridium thermocellum DNA constructed in lambda ZAPII was screened for xylanase-expressing clones. Cross-hybridization experiments revealed a new xylanase gene isolated from the gene library, which was designated xyn Y. The encoded enzyme, xylanase Y (XYLY), displayed features characteristic of an endo-beta1,4-xylanase: the enzyme rapidly hydrolysed oat spelt, wheat and rye arabinoxylans and was active against methyl-umbelliferyl-beta-D-cellobioside, but did not hydrolyse any cellulosic substrates. The pH and temperature optima of the enzyme were 6.8 and 75 degrees C respectively, and the recombinant XYLY, expressed by Escherichia coli had a maximum Mr of 116000. The nucleotide sequence of xyn Y contained an open reading frame of 3228 bp encoding a protein of predicted Mr 120 105. The encoded enzyme contained a typical N-terminal 26-residue signal peptide, followed by a 164 amino acid sequence, designated domain A, that was not essential for catalytic activity. Downstream of domain A was a 351-residue xylanase Family F catalytic domain, followed by a 180-residue sequence that exhibited 28% sequence identity with a thermostable domain of Thermoanaerobacterium saccharolyticum xylanase A. The C-terminal portion of XYLY comprised the 23-residue duplicated docking sequence found in all other C. thermocellum plant cell wall hydrolases that are constituents of the bacterium's multienzyme complex, termed the cellulosome, followed by a 286-residue domain which exhibited 32% sequence identity with the N-terminal region of C. thermocellum xylanase Z. The enzyme did not contain linker sequences found in other C. thermocellum plant cell wall hydrolases. Analysis of truncated forms of XYLY and hybrid proteins, comprising segments of XYLY fused to the E. coli maltose binding domain, confirmed that XYLY contained a central catalytic domain and an adjacent thermostable domain. The C-terminal domain did not bind to cellulose or xylan. Western blot analysis using antiserum raised against XYLY showed that the xylanase was located in the cellulosome and did not appear to be extensively glycosylated. The non-catalytic domains of XYLY are discussed in relation to the general stability of thermophilic xylanases.

Cloning and expression in Saccharomyces cerevisiae of a Trichoderma reesei beta-mannanase gene containing a cellulose binding domain

beta-Mannanase (endo-1,4-beta-mannanase; mannan endo-1,4-beta-mannosidase; EC 3.2.1.78) catalyzes endo-wise hydrolysis of the backbone of mannan and heteromannans, including hemicellulose polysaccharides, which are among the major components of plant cell walls. The gene man1, which encodes beta-mannanase, of the filamentous fungus Trichoderma reesei was isolated from an expression library by using antiserum raised towards the earlier-purified beta-mannanase protein. The deduced beta-mannanase consists of 410 amino acids. On the basis of hydrophobic cluster analysis, the beta-mannanase was assigned to family 5 of glycosyl hydrolases (cellulase family A). The C terminus of the beta-mannanase has strong amino acid sequence similarity to the cellulose binding domains of fungal cellulases and is preceded by a serine-, threonine-, and proline-rich region. Consequently, the beta-mannanase is probably organized similarly to the T. reesei cellulases, having a catalytic core domain separated from the substrate-binding domain by an O-glycosylated linker. Active beta-mannanase was expressed and secreted by using the yeast Saccharomyces cerevisiae as the host. The results indicate that the man1 gene encodes the two beta-mannanases with different isoelectric points (pIs 4.6 and 5.4) purified earlier from T. reesei.

Identification of a novel cellulose-binding domain within the multidomain 120 kDa xylanase XynA of the hyperthermophilic bacterium Thermotoga maritima

A segment of Thermotoga maritima strain MSB8 chromosomal DNA was isolated which encodes an endo-1,4-beta-D-xylanase, and the nucleotide sequence of the xylanase gene, designated xynA, was determined. With a half-life of about 40 min at 90 degrees C at the optimal pH of 6.2, purified recombinant XynA is one of the most thermostable xylanases known. XynA is a 1059-amino-acid (approximately 120 kDa) modular enzyme composed of an N-terminal signal peptide and five domains, in the order A1-A2-B-C1-C2. By comparison with other xylanases of family 10 of glycosyl hydrolases, the central approximately 340-amino-acid part (domain B) of XynA represents the catalytic domain. The N-terminal approximately 150-amino-acid repeated domains (A1-A2) have no significant similarity to the C-terminal approximately 170-amino-acid repeated domains (C1-C2). Cellulose-binding studies with truncated XynA derivatives and hybrid proteins indicated that the C-terminal repeated domains mediate the binding of XynA to microcrystalline cellulose and that C2 alone can also promote cellulose binding. C1 and C2 did not share amino acid sequence similarity with any other known cellulose-binding domain (CBD) and thus are CBDs of a novel type. Structurally related protein segments which are probably also CBDs were found in other multidomain xylanolytic enzymes. Deletion of the N-terminal repeated domains or of all the non-catalytic domains resulted in substantially reduced thermostability while a truncated xylanase derivative lacking the C-terminal tandem repeat was as thermostable as the full-length enzyme.(ABSTRACT TRUNCATED AT 250 WORDS)