Mid-term results of the BIOLOX delta ceramic-on-ceramic total hip arthroplasty

Two-Year Results of Ceramic-on-Ceramic Hip Resurfacing in an International Multicenter Cohort

BACKGROUND

Hip resurfacing arthroplasty (HRA) is a bone-conserving alternative to total hip arthroplasty. We present the 2-year clinical and radiographic follow-up of a novel ceramic-on-ceramic HRA in an international multicenter cohort.

METHODS

Patients undergoing HRA between September 2018 and January 2021 were prospectively included. Patient-reported outcome measures (PROMs) in the form of the Forgotten Joint Score, Hip Disability and Osteoarthritis Outcome Score Jr., Western Ontario and McMaster Universities Arthritis Index, Oxford Hip Score, and University of California, Los Angeles, Activity Score were collected preoperatively, and at 1 and 2 years postoperation. Serial radiographs were assessed for migration, component alignment, evidence of osteolysis or loosening, and heterotopic ossification formation.

RESULTS

The study identified 200 patients who reached a minimum 2-year follow-up (mean 3.5 years). Of these, 185 completed PROMs follow-up at 2 years. There was a significant improvement in Hip Disability and Osteoarthritis Outcome Score (P < .001) and Oxford Hip Score (P < .001) between the preoperative, 1-year, and 2-year outcomes. Patients had improved activity scores on the University of California, Los Angeles, Active Score (P < .001), with 45% reporting a return to high-impact activity at 2 years. At 1 and 2 years, the Forgotten Joint Score was not significantly different (P = .38). There was no migration, osteolysis, or loosening of any of the implants. No fractures were reported over the 2-year follow-up, with only 1 patient reporting a sciatic nerve palsy. There were 2 revisions, 1 for unexplained pain at 3 months due to acetabular component malposition and 1 at 33.5 months for acetabular implant failure.

CONCLUSIONS

The ceramic-on-ceramic resurfacing at 2 years postoperation demonstrates promising results with satisfactory outcomes in all recorded PROMs. Further long-term data are needed to support the widespread adoption of this prosthesis as an alternative to other HRA bearings.

Bearing-Related Complications of Total Hip Arthroplasty Using Fourth-Generation Ceramic-On-Ceramic Articulations: Does Articular Noise Increase Over Time?

BACKGROUND

We previously reported the mean 6-year outcomes of total hip arthroplasty (THA) using fourth-generation ceramic-on-ceramic (CoC) articulations. With extended observations, this study aimed to report the mean 12-year outcomes focusing on bearing-related complications of CoC THA.

METHODS

We reviewed primary CoC THAs performed between May 2009 and April 2012 at a single institution. Of the 831 hips (739 patients), 716 hips (635 patients) that satisfied a minimum 10-year follow-up were included. The mean age at operation was 54 years (range, 16 to 83). The occurrence of bearing-specific complications, including ceramic fractures and noise generation, was evaluated. The mean follow-up duration was 12 years (range, 10 to 14).

RESULTS

A total of 2 (0.3%) ceramic liner fractures occurred, as previously reported. No additional ceramic fractures were observed during the extended follow-up period. However, the cumulative incidence of audible noise increased from 6.4 (48 of 749) to 8.2% (59 of 716). Of the 59 hips with noise, 26 (44.1%) developed noise within 1 year, whereas 13 (22.0%) presented with noise more than 5 years after THA. The noise was described as clicking in 35 hips (4.9%) and as squeaking in 24 hips (3.4%). No revision surgeries were performed for noise, except in 2 cases of concomitant liner fractures. The implant survivorship free of any revision was 98.1% at 12 years.

CONCLUSIONS

No additional ceramic fractures were identified in this extension study at a minimum follow-up of 10 years. However, the prevalence of articular noise has increased from 6.4 to 8.2% since the previous report. Possible late-onset noise should be considered when performing CoC THA in younger patients.

Updating Osteonecrosis of the Femoral Head

Osteonecrosis of the femoral head (ONFH), a condition characterized by the presence of a necrotic bone lesion in the femoral head, is caused by a disruption in the blood supply. Its occurrence is more common in young and middle-aged adults and it is the main reason for performance of total hip arthroplasty in this age group. Its incidence is increasing along with increased use of glucocorticoids for management of adjuvant therapy for treatment of leukemia as well as organ transplantation and other myelogenous diseases. Current information on etiology and pathogenesis, as well as natural history, stage system, and treatments is provided in this review. A description of the Association Research Circulation Osseous (ARCO) criteria for classification of glucocorticoids- and alcohol-associated ONFH, 2019 ARCO staging system, and 2021 ARCO classification using computed tomography for the early stages of ONFH is also provided.

Outcomes of Ceramic-On-Ceramic Bearing Total Hip Arthroplasty: A Minimum 10-Year Follow-Up Study

BACKGROUND

Although the fourth generation of ceramics has demonstrated excellent clinical results 5 to 6 years postoperatively, concerns over ceramic fracture and squeaking persist and longer-term follow-up (minimum 10 years) studies are warranted. Our study aimed to evaluate the minimum 10-year clinical outcomes and bearing-specific complications of ceramic-on-ceramic (CoC) total hip arthroplasties.

METHODS

We retrospectively evaluated all patients who underwent primary delta CoC total hip arthroplasty in our institution between January 2004 and February 2013. Demographics, surgical techniques, complications, patient-reported outcomes, and radiographic outcomes were collected and analyzed. For continuous variables, the comparison between groups was conducted using a one-way analysis of variance. Of all 235 patients included in the study, 70.5% were women (190 hips). The mean follow-up period was 12 years (range, 10 to 18). The femoral head sizes of 28- mm, 32 mm, and 36 mm were used in 50, 26, and 197 cases, respectively. Mean acetabular inclination and anteversion angles were 39.2 ± 7.1° and 14.9 ± 3.5°.

RESULTS

There were 5 hips revised at a mean 4.6 years (range, 0.1 to 7.1). One revision was squeaking-related. Squeaking was also reported by 8 other patients, but did not require revision. Other reasons for revision were early infection in 2 cases, stem loosening in 1 case, and stem fracture in 2 cases. The survival analysis for any causes for revision as an endpoint was 96.7% (95% confidence interval 0.313%-2.57%).

CONCLUSION

We report excellent mean 12-year follow-up results regarding the complications and survivorship of the fourth generation CoC bearings.

Inflammatory, Oxidative Stress and Small Cellular Particle Response in HUVEC Induced by Debris from Endoprosthesis Processing

We studied inflammatory and oxidative stress-related parameters and cytotoxic response of human umbilical vein endothelial cells (HUVEC) to a 24 h treatment with milled particles simulating debris involved in sandblasting of orthopedic implants (OI). We used different abrasives (corundum-(Al₂O₃), used corundum retrieved from removed OI (u. Al₂O₃), and zirconia/silica composite (ZrO₂/SiO₂)). Morphological changes were observed by scanning electron microscopy (SEM). Concentration of Interleukins IL-6 and IL-1β and Tumor Necrosis Factor α (TNF)-α was assessed by enzyme-linked immunosorbent assay (ELISA). Activity of Cholinesterase (ChE) and Glutathione S-transferase (GST) was measured by spectrophotometry. Reactive oxygen species (ROS), lipid droplets (LD) and apoptosis were measured by flow cytometry (FCM). Detachment of the cells from glass and budding of the cell membrane did not differ in the treated and untreated control cells. Increased concentration of IL-1β and of IL-6 was found after treatment with all tested particle types, indicating inflammatory response of the treated cells. Increased ChE activity was found after treatment with u. Al₂O₃ and ZrO₂/SiO₂. Increased GST activity was found after treatment with ZrO₂/SiO₂. Increased LD quantity but not ROS quantity was found after treatment with u. Al₂O₃. No cytotoxicity was detected after treatment with u. Al₂O₃. The tested materials in concentrations added to in vitro cell lines were found non-toxic but bioactive and therefore prone to induce a response of the human body to OI.

Ten to 13-Year Results of Delta Ceramic-on-Ceramic Total Hip Arthroplasty in Patients Less Than 30 Years Old

BACKGROUND

We previously reported mid-term results of total hip arthroplasty (THA) using Delta ceramic-on-ceramic (CoC) bearings in 72 patients (86 hips) who were <30 years old. Noise was noted in 8 (9.3%) of the hips, no osteolysis or loosening was detected, and no patient required reoperation. The purpose of this study was to assess clinical and radiographic outcomes, complications, and survivorship at >10 years after THA using Delta CoC bearings in patients who were <30 years old.

METHODS

Cementless THA with a Delta CoC bearing was performed between March 2008 and January 2012 in 91 hips of 76 patients who were <30 years old. Eighty-five hips in 71 patients (44 men and 27 women) with a mean age of 25.9 years (range, 16 to 29 years) at surgery were followed for a mean of 10.9 years (range, 10 to 13 years).

RESULTS

No ceramic bearings fractured. The incidence of squeaking increased to 5.9% (5 of 85), but the squeaking was not reproducible within individual patients. Periprosthetic osteolysis developed in 3 hips (3 patients): around the stem in 2 and around the metal shell in 1. The stem in 1 hip underwent revision because of a Vancouver type-B2 periprosthetic femoral fracture. One patient with systemic lupus erythematosus underwent irrigation and debridement for periprosthetic joint infection. Survivorship free of reoperation for any reason was 92.4% (95% confidence interval, 82.4% to 100%) at 13 years.

CONCLUSIONS

The long-term results and survivorship of Delta CoC THA in patients <30 years old were favorable.

LEVEL OF EVIDENCE

Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Damage analysis of retrieved BioloxⓇdelta components used in hard and soft bearings

This retrieval study included 43 Biolox delta explants (18 CoC, 25 CoP). Implants were examined macroscopically, whereby damage was evaluated using a semi quantitative scoring system. Confocal microscopy was used to examine wear related damage patterns of the articulating surfaces. Scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) was used to analyze wear marks on the implant surface and wear debris in periprosthetic tissue samples. Raman spectroscopy and X-ray diffraction (XRD) were used to quantify monoclinic zirconia fractions. On all components, in vivo wear resulted predominantly in different damage patterns caused by metal transfer. In CoC bearings stripe wear was additionally detected, and some implants underwent severe damage due to component breakage. The wear scores were higher for CoC components, with no differences between the scores for CoC heads and liners. Wear features caused comparable roughening on implants from CoC and CoP bearings. SEM studies demonstrated that most wear marks were caused by metal debris released from implant components. Grain pull-out was observed in stripe wear regions. Monoclinic phase shift was observed in a similar quantity on components from CoP and CoC bearings. The increase of monoclinic zirconia content around metal deposits was minimal and was more pronounced in areas of stripe wear. The results of this study indicate, that ZTA components in general undergo minimal wear in both, CoC and CoP bearings, however, it is more pronounced in the former. Metal deposits, as the most common wear feature, have no significant effect on monoclinic phase transition. STATEMENT OF SIGNIFICANCE: In this paper, we classify all damage patterns macroscopically according to an established scoring system and assess them regarding surface roughness (confocal microscopy) and monoclinic phase content (Raman spectroscopy) in order to derive the severity for patients. We compare hard-hard and hard-soft bearings and relate damage patterns with metal transfer based on SEM/EDS examinations. Furthermore, we work out correlations between patient-specific data, cause of revision and the physical condition of each individual sample Our cohort consists of 43 Biolox delta retrievals, a comparatively large quantity. In addition, we address current topics such as metal transfer and, based on the classification of damage patterns, provide incentives and/or meaningful focal points for further research.

Revision total hip arthroplasty by a ceramic bearing surface after a third- and fourth-generation ceramic head or liner fracture

PURPOSE

Although rare, fractures of ceramic components are difficult to revise, mainly due to the presence of residual ceramic debris that can cause catastrophic wear of the replacement components. Modern ceramic-on-ceramic bearings are suggested to improve outcomes of revision total hip arthroplasty (THA) for ceramic fractures. However, there are few published reports of mid-term outcomes of revision THA using ceramic-on-ceramic bearings. We evaluated clinical and radiographic outcomes of 10 patients who received ceramic-on-ceramic bearings during revision THA for ceramic fractures.

METHODS

All patients but one received fourth-generation Biolox Delta bearings. Clinical evaluation was performed using the Harris hip score at latest follow-up, and all patients received a radiographic evaluation to analyze the fixation of the acetabular cup and of the femoral stem. Osteolytic lesions and the presence of ceramic debris were noted.

RESULTS

After a mean follow-up of 8.0 years, there were no complications or implant failures, and all patients reported satisfaction with their implant. The average Harris hip score was 90.6. There was neither osteolysis nor loosening, but despite our extensive synovial debridement, ceramic debris was noted in the radiographs of five patients (50%).

CONCLUSION

We report excellent mid-term outcomes, with no implant failures after eight years despite ceramic debris being found in a significant proportion of patients. We conclude that modern ceramic-on-ceramic bearings are an advantageous option for the revision of THA due to the fracture of initial ceramic components.

A 10- to 12-year follow-up study of delta ceramic-on-ceramic total hip arthroplasty

BACKGROUND

We previously reported five-to-seven-year results of total hip arthroplasty (THA) with the use of delta ceramic-on-ceramic (CoC) bearing. We conducted an extension study with a CT scan at a minimum of 10 years after surgery.

METHODS

From March 2009 to March 2011, 273 patients (310 hips) received cementless THA with delta CoC bearing, porous-coated cup and hydroxyapatite-coated stem. In this extended study, 252 patients (144 men and 108 women) (288 hips) with a mean age of 49.7 years (16-83) at surgery were followed for a mean of 10.4 years (10-12) with CT scans in 133 hips (46.2%, 133/288). Clinical and radiographic evaluations were made at each follow-up and Kaplan-Meier survival analysis was performed with revision and reoperation as endpoints.

RESULTS

There were no more ceramic fractures. Compared to mid-term results, the incidence of squeaking and RLLs increased to 3.1% (9/288) and 19.4% (56/288), respectively. The RLL progressed to focal osteolysis in 3 hips (5.4%, 3/56). No hip had detectable wear or prosthetic loosening. Two hips were reoperated due to periprosthetic joint infection and periprosthetic femoral fracture in each. The survivorship decreased to 98.3% (96.7-99.9%) at 12 years.

CONCLUSION

During the extended follow-up, no additional ceramic fracture occurred, and the incidence of squeak increased by 0.7%. The long-term survivorship of Delta CoC THA was encouraging. However, focal osteolysis occurred around the hydroxyapatite-coated stem in 1% (3/288).

LEVEL OF EVIDENCE

II (Prospective cohort study).

Primary Total Hip Arthroplasty with Ceramic-on-Ceramic Articulations: Analysis of a Single-center Series of 1,083 Hips at a Minimum of 10-Year Follow-Up

BACKGROUND

There are limited long-term results of using ceramic-on-ceramic bearings (COC) in total hip arthroplasty (THA) in a large number of patient cohorts. The purpose of this study was to evaluate the minimum 10-year clinical and radiological outcomes and survivorship in a single surgeon series of CoC-THA.

METHODS

Among the 1,039 patients (1,391 hips) who underwent primary THA at our institution between 2008 and 2011, 49 patients (69 hips) experienced paralysis or death, and 194 patients (239 hips, 19%) were lost to follow-up. The remaining 796 patients (1,083 hips) were assessed at a mean of 11 years (range, 10 to 13 years) using the modified Harris hip score (mHHS), the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and a questionnaire on articular noises. Survival analysis was used to estimate the survivorship. Radiological evaluation was performed on 869 hips at the final follow-up.

RESULTS

Survivorship at 11 years was 98.3% for revision or aseptic loosening, and 98.2% for re-operation. At the final follow-up, the mean mHHS and WOMAC scores were 93 (range, 12 to 100) and 14.4 (range, 3 to 66), respectively. There were 131 (12%) hips experienced squeaking, but no patient required revision. No fracture of the ceramic was observed. Radiological evaluation at the final follow-up revealed that three (0.3%) hips exhibited loosening, two (0.2%) had femoral osteolysis, 81(9.3%) acquired radiolucencies, and 35 (4%) showed heterotopic ossification.

CONCLUSION

This ceramic-on-ceramic bearing for THA had a high survivorship and excellent functional outcomes for at least 10 years.

Trends in Surgical Treatment of Femoral Head Osteonecrosis in South Korea: An Analysis Using Nationwide Claims Database

BACKGROUND

Osteonecrosis of the femoral head (ONFH) involves young or middle-aged adults, and its incidence is increasing along with increasing use of steroids in the management of organ transplantation and adjuvant therapy for malignant neoplasms. To date, no pharmacological agent has been proven to prevent or retard the progression of ONFH, and surgical procedures including joint preservation procedures and hip arthroplasties are main treatments for the disease. Although ONFH is the most common or second most common disease for hip arthroplasty in East Asian countries, the trend of surgical procedures in this region remains unknown. Thus, we evaluated trends in surgical treatment of the disease in South Korea.

METHODS

We identified patients with ONFH from the Korean Health Insurance Review and Assessment (HIRA) database, a nationwide medical claims database of South Korea, between January 2007 and December 2018 and calculated the proportions of following surgical procedures at each year: total hip arthroplasty (THA), hemiarthroplasty (HA), core decompression/multiple drilling, femoral osteotomy, and vascularized bone grafting.

RESULTS

The total number of procedures increased from 3,824 in 2007 to 6,929 in 2018. Overall, the rate of THA (86%) was far greater than other procedures. From 2007 to 2018, the percentage of THA among the procedures increased from 80% to 91%, while that of joint preservation procedures decreased from 11% to 5%.

CONCLUSIONS

The total number of surgical procedures performed for ONFH increased and the percentage of THA increased, while that of joint preservation procedures decreased from 2007 to 2018 in South Korea.

Spontaneous resolution of asymptomatic alumina matrix composite ceramic liner dissociation: a case report

Background

Total hip arthroplasty(THA)is widely used to treat end-stage hip disorders. Ceramic-on-ceramic total hip prostheses are widely used because of their durability. Alumina matrix composite (AMC), known as the fourth-generation ceramics, reduces implant fracture and wear rate compared to their predecessors. However, ceramic acetabular liner dissociation is a complication that necessitates revision of the AMC prostheses. To date, only few cases of AMC liner dissociation have been reported and all of which have been treated with revision surgery. Therefore, the prognosis of non-operated AMC liner dissociation remains unknown so far.

Case presentation

A 57-year-old man with avascular necrosis of the femoral head was treated with THA, wherein a Pinnacle® (DePuy, J&J, Warsaw, IN) acetabular cup and AMC liner were implanted. Intraoperative examination confirmed proper seating of the liner, whereas the initial postoperative radiograph revealed liner dissociation. The patient refused surgical revision due to the absence of symptoms and was discharged and followed-up. The patient made an uneventful recovery, and radiographic follow-up at 6-month post-operation showed that the liner was re-seated to its right position. No clinical or radiographic anomaly was found at the 15-month of postoperative follow-up.

Conclusions

Here, we report an unprecedented case of AMC ceramic liner dissociation with spontaneous resolution. This case shows that ceramic liner dissociation could be asymptomatic, and careful postoperative examination of the patient is important. Spontaneous resolution is possible, but the underlying mechanism and the eligible patient to benefit from it must be investigated. Before clarifying these questions, revision surgery should be the first-line treatment.

Third and fourth generation ceramic-on-ceramic total hip arthroplasty at a minimum of ten years

BACKGROUND

Ceramic on Ceramic bearings in Total Hip Arthroplasty (THA) afford a low friction coefficient, low wear rates and extreme hardness. Significant complications include hip squeak, ceramic fracture and poor polyethylene performance in revision procedures due to imbedding of abrasive microscopic ceramic fragments. We report on the results of this bearing at a minimum of 10 years.

METHODS

A single-centre retrospective review of 449 THAs was performed. Primary outcome measures included aseptic revision and all-cause revision rates at a minimum of 10 years post operatively. Evaluation of functionality was performed with WOMAC and SF-36 scores which were performed pre-operatively and at intervals of 6 months, one year, 2 years, 5 years and 10 years post operatively.

RESULTS

There was a 6.2% (n = 28) all-cause and 5.3% (n = 24) aseptic revision rate for ceramic on ceramic total hip arthroplasty at minimum of 10 years with a mean time to revision 4.8 years (range 2 months-11.6 years). Notably, there were 2 revisions for ceramic head fracture, one for ceramic liner fracture, 3 for aseptic loosening and 3 revisions for squeaking. Pain of unknown origin was the most common reason for revision. There was an improvement in postoperative WOMAC scores from a mean of 59.8 (range 15-95) pre-operatively to a mean of 15.6 (range 0-78) at 10 years.

CONCLUSION

This study showed good functional outcomes but high revision rates for CoC THA at a minimum of 10 years. Our rates of ceramic fracture were consistent with other studies.

Fourth‐Generation Ceramic‐on‐Ceramic THA in Patients with Ankylosing Spondylitis: A Minimum 10‐Year Follow‐Up

Objective

To report the long‐term outcomes of total hip arthroplasty (THA) with fourth‐generation ceramic‐on‐ceramic (CoC) bearing in patients with ankylosing spondylitis (AS).

Methods

We retrospectively identified 180 primary THAs performed in 110 patients with AS, including 100 (90.9%) men and 10 women (9.1%), from 2009 to 2011.The mean age of the patients at surgery was 33 years (range, 16 to 65 years). Cementless prostheses with fourth‐generation CoC bearings were used in all patients. Survivorship of the implants and postoperative complications were calculated. Functional improvement was assessed by the hip flexion‐extension range of motion (ROM) and Harris hip score (HHS). A special noise assessment questionnaire was performed at the last follow‐up. The cumulative incidence of noise was calculated by the Kaplan–Meier method with 95% confidence intervals (CIs). Clinical characteristics and functional outcomes were compared in the hips with noise to those without noise.

Results

The mean follow‐up was 11 years (range, 10 to 12 years), and survivorship of the implants was 99.4% at the most recent follow‐up. The complications included dislocation (one hip, 0.6%), periprosthetic joint infection (one hip, 0.6%), mild to moderate pain (five hips, 2.8%), heterotopic ossification (12 hips, 6.7%), and noise (52 hips, 28.9%). The flexion‐extension ROM improved significantly with a median from 10° (range, 0 ~ 130°) to 100° (30 ~ 130°) after THA (p < 0.001), and the HHS increased significantly from 41 ± 20 to 90 ± 8 (p < 0.001). The cumulative incidence of noise at 0.5, 5, and 10 years was 6.1% (95% CI, 2.6 ~ 9.6), 16.7% (95% CI, 11.2 ~ 22.1), and 28.9% (95% CI, 22.2 ~ 35.5), respectively, and that of squeaking at 0.5, 5, and 10 years was 4.4% (95% CI, 1.4 ~ 7.4), 13.3% (95% CI, 8.4 ~ 18.3), and 23.9% (95% CI, 17.6 ~ 30.1), respectively. None of the patients with noise generation in the hip reported it affecting daily activities or causing dissatisfaction. No differences in age, sex, BMI, disease duration, bilateral THA, the frequency of bony ankylosis, the proportion of using a 36‐mm‐diameter femoral head, pre/postoperative flexion‐extension ROM, or pre/postoperative HHS were found between hips with noise and those without noise (p > 0.05).

Conclusion

THAs with fourth‐generation CoC bearings exhibit excellent long‐term survival and clinical outcomes in patients with AS, with a very low dislocation rate. The incidence of noise associated with CoC bearings in THA performed in patients increases over time, but it does not affect postoperative hip function or daily activities.

Surgeons’ Awareness and Impaction Technique of a Ceramic Liner into a Metal Shell

Background

In ceramic-on-ceramic total hip arthroplasty, firm locking is necessary between a ceramic liner and an acetabular metal shell to prevent dissociation of the liner from the metal shell. We evaluated surgeons’ awareness of the technique for inserting the ceramic liner and measured the impaction force applied by surgeons during the insertion of the ceramic liner.

Methods

To evaluate the awareness, we conducted a survey using a questionnaire including techniques for ceramic liner insertion. The impaction force was measured using an impaction simulator in 224 surgeons.

Results

Most surgeons answered that they cleaned and dried up the inner surface of the metal shell before inserting a ceramic liner (96.4% and 86.2%, respectively), and 74.6% checked the correct seating of the ceramic liner. However, only 23.2% correctly answered that a minimum of 2kN (a light strike) was necessary to obtain a sufficient fit between the metal shell and the ceramic liner. The impaction force was weaker than 2 kN in 9.4% of the surgeons.

Conclusions

Education about the adequate impaction force to obtain a firm fit of the ceramic liner is necessary for surgeons who perform total hip arthroplasty using ceramic-on-ceramic bearings.

Survivorship of Ceramic-on-Ceramic Total Hip Arthroplasty With Metal-Backed Acetabular Liners at 10 Years

BACKGROUND

Ceramic-on-ceramic bearings are becoming increasingly popular in primary total hip arthroplasty (THA). To enhance ceramic-on-ceramic liner exchange in case of revision surgery, metal-backed liner systems have been proposed. Little is known about the clinical performance of these implants. The purpose of this study is to evaluate a metal-backed liner implant system for primary THA.

METHODS

A total of 422 patients (with 468 consecutive THAs) were followed over a mean period of 10 years. All arthroplasties were performed with a cementless stem, a press-fit cup, and a metal-backed liner system. Surgical and clinical data, complications, and revisions were analyzed. The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) before surgery and at 1 and 10 years after surgery were compared.

RESULTS

The overall 10-year implant survival rate was 93.8%. The survival rate was 97.0% for heads and liners, 97.5% for stem, and 99.3% for acetabular cup. The most common reason for revision was ceramic breakage (2.4%) of the third-generation (BIOLOX forte) acetabular liner. Mean WOMAC score improved significantly from 50.1 before surgery to 13.2 at 1 year after surgery. There was no difference in WOMAC scores between surgical approach and type of bearing at 1 and 10 years after surgery.

CONCLUSION

THA using cementless stem, press-fit cup, and metal-backed liner system provides satisfactory long-term outcomes, with revision rate comparable to that with other systems available in the market. The metal-backed liner system has low risk of mal-seating. Third-generation ceramic liners should be avoided as they seem to be more prone to breakage.

Preventing ceramic liner fracture after Delta ceramic-on-ceramic total hip arthroplasty

BACKGROUND

The results of total hip arthroplasty (THA) with use of Delta ceramic articulation were successful at medium term follow-up. The use of this newest ceramic has markedly reduced the incidence of ceramic head fractures, but not the incidence of ceramic liner fractures. We tested a hypothesis that the ceramic fractures are prevented by use of a metal shell with 18° inner taper angle and a stem design with a reduced neck geometry.

METHODS

We conducted a prospective multicenter study of cementless THA with use of 32/36-mm Delta ceramic bearing, Exceed ABT metal shell and Taperloc stem. We evaluated ceramic fracture, noise, clinical results, radiological changes and survival rate at a minimum of 5-year follow-up.

RESULTS

From April 2010 to February 2012, 246 patients (274 THAs) were enrolled. Among them, 224 patients (130 men and 94 women, 250 hips) were followed-up for 5-8 years (mean 6.0 years). Ceramic malseating or fracture did not occur in any patient. Eight patients (8 hips, 3.2%) reported noise. Mean Harris hip score was 84 points at the latest follow-up. All acetabular and femoral components had bone-ingrown stability. Two hips were revised due to recurrent dislocation and periprosthetic fracture. The survival rate was 99.6% at 8 years postoperatively.

CONCLUSION

Ceramic fractures can be prevented by a use of (1) 32/36-mm Delta ceramic bearing, (2) metal shell with 18° taper angle, and (2) stem with a reduced neck geometry. However, noise remains a concern of the Delta ceramic bearing.

LEVEL OF EVIDENCE

Therapeutic level II.

Osteonecrosis of the Femoral Head: an Updated Review of ARCO on Pathogenesis, Staging and Treatment

Non-traumatic osteonecrosis of the femoral head (ONFH) usually affects adults younger than 50 years and frequently leads to femoral head collapse and subsequent arthritis of the hip. It is becoming more prevalent along with increasing use of corticosteroids for the adjuvant therapy of leukemia and other myelogenous diseases as well as management of organ transplantation. This review updated knowledge on the pathogenesis, classification criteria, staging system, and treatment of ONFH.

Long-Term Outcome on the Mal-Seating of Ceramic-on-Ceramic Articulation in Total Hip Arthroplasty

BACKGROUND

Total hip arthroplasty with ceramic-on-ceramic articulation aims to decrease wear, osteolysis, and aseptic loosening. A metal-backed ceramic liner was developed to reduce the risk of liner fracture. However, a significant number of cases of mal-seating of the metal-backed ceramic liner were observed in the 2000s, and there were concerns about their outcome. This review aims to investigate the long-term performance of the mal-seated ceramic liner.

METHODS

From July 2003 to March 2007, 35 ceramic-on-ceramic total hip arthroplasties were performed with the Trident acetabular system. Clinical assessment, radiological analysis, and outcome assessment were performed. The prevalence of liner mal-seating and its long-term outcomes were investigated.

RESULTS

There was liner mal-seating in 8 hips (22.9%). One liner was exchanged in the early postoperative period. No revision surgery was required for the remaining 7 hips at a mean follow-up of 14 years. All patients were free of hip pain with a mean Harris Hip Score of 94.7 at the most recent follow-up. No adverse event was observed.

CONCLUSION

The long-term outcomes of the mal-seated liner were favorable. However, surgeons should exercise meticulous surgical technique to achieve a properly aligned liner within the acetabular shell to minimize this potentially correctable error.

Articular Noise After THA Using Delta CoC Bearings Has Little Impact on Quality of Life

BACKGROUND

To report clinical outcomes and survival at a minimum of 10 years of a consecutive series of uncemented total hip arthroplasty (THA) with fourth-generation ceramic-on-ceramic (CoC) bearings and determine the incidence of articular noises, their risk factors, and impact on quality of life (QoL).

METHODS

From a series of 456 CoC THAs, there were 25 revisions, 38 deceased, and 36 lost to follow-up. The remaining 357 hips were assessed at 11.1 ± 0.7 years (range, 10-14) using the Forgotten Joint Score, Oxford Hip Score, and a questionnaire on articular noises. Kaplan-Meier survival was calculated, and multivariable analysis was performed to determine associations between articular noise and patient/surgical factors.

RESULTS

The 10-year survival was 96.3% for the cup, 96.5% for the stem, and 94.2% for all components. The Forgotten Joint Score was 79 ± 26 (range, 0-100), and Oxford Hip Score was 16 ± 7 (range, 12-60). The mean impact of articular noises on QoL was 1.8 ± 2.9 (range, 0-9): considered negligible in 60 hips (16%), moderate in 27 hips (7%), and severe in only 13 hips (4%). Multivariable analyses revealed that the incidence of articular noise decreased with age (odds ratio [OR], 0.94; P = .001), body mass index (OR, 0.85; P = .001), and in hips implanted with 32-mm (vs 36 mm) heads (OR, 0.18; P = .030).

CONCLUSION

Of 100 hips (28%) that reported some articular noises 10 years after CoC THA, the impact of articular noises on QoL was negligible for most patients. Although larger heads can improve mobility and reduce risks of dislocations, surgeons must be aware that increasing head size could also increase risks of articular noises, notably in young and active patients.

The reasons for ceramic-on-ceramic revisions between the third- and fourth-generation bearings in total hip arthroplasty from multicentric registry data

This study aimed to evaluate (1) the overall reasons for first revision in CoC THAs; (2) whether the reasons for revision differ between third-generation and fourth-generation CoC THAs; and (3) the specific factors associated with bearing-related problems as the reason for revision. We retrospectively reviewed 2045 patients (2194 hips) who underwent first revision THA between 2004 and 2013, among which 146 hips with CoC bearings underwent revision. There were 92 hips with third-generation ceramic bearings and 54 hips with fourth-generation ceramic bearings. The major reasons for CoC THA revisions were ceramic fracture and loosening of the cup or stem. When ceramic fracture, squeaking, incorrect ceramic insertion, and unexplained pain were defined as directly related or potentially related to ceramic use, 28.8% (42/146) of CoC revisions were associated with bearing-related problems. Among the third-generation ceramic bearings, revision was performed in 41.3% (38/92) of cases owing to bearing-related problems whereas revisions were performed for only 7.4% (4/54) of cases with fourth-generation ceramic bearings owing to bearing-related problems (p < 0.001). Younger age, lower American Society of Anesthesiologists (ASA) grade, and preoperative diagnosis of osteonecrosis were factors related to CoC THA revisions due to bearing-related problems.

Cementless total hip arthroplasty with delta-on-delta ceramic bearing in patients younger than 30 years

BACKGROUND

Despite improvements in the mechanical properties of alumina ceramics, the outcome of total hip arthroplasty (THA) with contemporary ceramic bearings in young patients remains a matter of concern. We evaluated the results of cementless THA with the use of the delta ceramic bearing, and determined the prevalence of osteolysis, squeaking, and ceramic fracture in patients aged < 30 years at mid-term.

METHODS

From March 2008 to January 2012, 76 consecutive patients (91 hips), younger than 30 years, underwent cementless THA with Delta ceramic bearings. In each follow-up, the clinical evaluation including noise and radiological evaluations were recorded.

RESULTS

Among them, 72 patients (86 THAs) were followed-up for a minimum of 5 years (mean 70.8; 60-95.9 months). There were 44 men (47 hips) and 28 women (39 hips). The mean age at the time of the index arthroplasty was 25.9 (16-30) years and the mean preoperative Harris Hip Score (HHS) was 59.4 (23-79) points. HHS improved to 96.3 (64-100) points at the final follow-up evaluation. 8 hips (9.3%) exhibited grinding or squeaking. No hip had aseptic loosening and no hip was revised. No osteolysis was detected around any acetabular or femoral components.

CONCLUSIONS

Our results suggest that cementless THA with the use of Delta ceramic bearing provides satisfactory results without osteolysis or ceramic fracture in patients aged <30 years at a mid-term follow-up.Clinical Trials.gov Protocol Registration System (trial no. NCT01838096).

Post-decellularization techniques ameliorate cartilage decellularization process for tissue engineering applications

Due to the current lack of innovative and effective therapeutic approaches, tissue engineering (TE) has attracted much attention during the last decades providing new hopes for the treatment of several degenerative disorders. Tissue engineering is a complex procedure, which includes processes of decellularization and recellularization of biological tissues or functionalization of artificial scaffolds by active cells. In this review, we have first discussed those conventional steps, which have led to great advancements during the last several years. Moreover, we have paid special attention to the new methods of post-decellularization that can significantly ameliorate the efficiency of decellularized cartilage extracellular matrix (ECM) for the treatment of osteoarthritis (OA). We propose a series of post-decellularization procedures to overcome the current shortcomings such as low mechanical strength and poor bioactivity to improve decellularized ECM scaffold towards much more efficient and higher integration.

Impingement Between the Metal Stem and the Ceramic Liner in Total Hip Arthroplasty: The Neck Is Not the Only Place Where Impingement Occurs

BACKGROUND

It is assumed that impingement between the ceramic liner and the stem increases the possibility of a liner fracture in total hip arthroplasty with a ceramic-on-ceramic bearing. The purpose of this study was to analyze the pattern of the impingement by evaluating the notches (U-shaped indented wear scars engraved on the stem) on radiographs to determine when and where impingement develops and to analyze the factors affecting its occurrence.

METHODS

Among the primary total hip arthroplasty cases using a ceramic-on-ceramic bearing performed from November 1997 to December 2003, 244 cases of 197 patients (123 male patients and 74 female patients) that had follow-up of ≥15 years were included. All of the radiographs were examined with special regard to the notches and the cup positions.

RESULTS

Notches were detected at 77 sites of 57 cases (23.4%) for the first time between 8 months and 14.8 years after the surgical procedure. They were located on the neck or the shoulder of the stem. Shoulder notches were detected only in the cases with a short-neck head. Shoulder notches were found in 29 cases (20.0% of short-neck cases). Cup inclination was lower (p = 0.01) and anteversion was higher (p = 0.01) in the group with notches than the group without notches. There were 5 cases of ceramic head fracture. One of them experienced another ceramic liner fracture, assumed to be caused by prosthetic shoulder impingement, after the revision surgical procedure.

CONCLUSIONS

The results of this study suggest that impingement between the stem and the ceramic liner occurs in a considerable proportion of patients who underwent total hip arthroplasty not only on the neck but also on the shoulder of the stem. Forceful and abrupt impingement on the stem shoulder can cause ceramic liner fracture. Impingement between the stem shoulder and the ceramic liner should be considered in designing a stem. It seems to be prudent to recommend that patients avoid squatting or sitting cross-legged on the floor as much as possible.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Third generation delta ceramic-on-ceramic bearing for total hip arthroplasty at mid-term follow-up

Purpose

to evaluate the results of Delta ceramic-on-ceramic (CoC) for total-hip-arthroplasty (THA).

Methods

261 THA using Delta-CoC, retrospectively analyzed. A 36 mm head was used in 189 cases and a 32/40 mm in the others. The series have been compared to a group of 89 THA with Forte-CoC.

Results

The Harris-Hip-Score improved from 49.1 ± 14.3 to 92.0 ± 8.9 (P < 0.001). In the Delta group there were one ceramic fracture and 2 dislocations. Two hips underwent revision. There were one revision in the Forte group for instability and one squeaking hip.

Conclusions

The new ceramic bearings provides a safe bearing for THA, with rare complications.

Ceramic Liner Fracture Caused by an Impingement between the Stem Shoulder and the Ceramic Liner

Mechanisms of ceramic liner fractures have not yet been fully elucidated. Impingement between a stem and ceramic liner is a proposed cause of ceramic liner fractures. We experienced a case of ceramic liner fracture caused by direct impingement between the stem shoulder and the ceramic liner. This type of impingement, unlike impingements with a stem neck, has not been previously reported. While we assume that certain characteristics of the stem contributed to the impingement, we report this case to note that caution may be needed when using certain stem designs.

Incidence of Ceramic Fracture in Contemporary Ceramic-on-Ceramic Total Hip Arthroplasty: A Meta-analysis of Proportions

BACKGROUND

We performed a proportion meta-analysis of currently available data to determine the prevalence of ceramic fracture for each generation.

METHODS

A total of 10,571 total hip arthroplasties from 45 studies were included. Proportion meta-analysis with a random-effects model was performed to estimate the prevalence of ceramic fracture. To determine whether the ceramic fractures have a fatigue nature and a risk or latent period for the development, postoperative time lapse, patient age, and body mass index were related with ceramic fracture by metaregression analysis.

RESULTS

As of postoperative 2.0 to 18.8 years, the rate of ceramic fracture was 0.5% (95% CI, 0.3%-0.8%) in the forte group and 0.2% (95% CI, 0.1%-0.4%) in the delta group (P = .059). The ceramic fracture rate for each component was 0.2% (95% CI, 0.1%-0.3%) for the forte head, 0.1% (95% CI, 0.0%-0.2%) for the delta head (P = .210), 0.2% (95% CI, 0.1%-0.3%) for the forte liner, and 0.2% (95% CI, 0.1%-0.4%) for the delta liner (P = .305). The rate of ceramic fracture per 1000 patient-years was 0.9 (95% CI, 0.5-0.13) in the forte group and 0.5 (95% CI, 0.2-0.8) in the delta group (P = .072). In metaregression analysis, no significant associations were found between prevalence of ceramic fracture and postoperative time lapse, patient age, or body mass index.

CONCLUSIONS

The rate of ceramic fracture was 0.9/1000 patient-year in the forte group and 0.5/1000 patient-year in the delta group. The results of this study provide baseline data for further studies validating ceramic bearings.

LEVEL OF EVIDENCE

Level I, meta-analysis.

Trans-lateral decubitus radiograph of the hip: A new view to measure the anteversion of the femoral stem

BACKGROUND

Malposition of the femoral stem is a risk factor for dislocation after total hip arthroplasty (THA). Currently, two radiological methods are available for the measurement of stem anteversion. However, one method is not applicable in patients with a stiff hip, and the other one cannot differentiate the anteversion and retroversion of the stem. Therefore, we developed a method to measure the stem anteversion and assessed its reliability as well as validity.

METHODS

Trans-lateral decubitus view of the proximal femur was taken with the patient in lateral decubitus position, the hip in extension and the knee in 90° flexion. Hip anteroposterior (AP) view, trans-lateral decubitus view and CT scan of the hip were taken in 36 patients, who underwent THA. Their mean age was 59.8 (27-84) years and the mean body mass index was 25.2 (18.8-30.9) kg/m². The stem neck-femoral shaft angle was measured on hip AP view and the trans-lateral decubitus view. Then, the stem anteversion was calculated using the Ogata-Goldsand formula. We assessed the intra- and inter-observer reliabilities and evaluated the validity by comparing with the measurements on CT scan.

RESULTS

The intra- and inter-observer reliabilities were 0.934 and 0.935, respectively. The calculated stem anteversion (23.72°±8.17°) correlated well with the stem anteversion on CT scan (23.91°±10.25°), especially when the radiological anteversion was <30° (correlation coefficient = 0.729, p = 0.001).

CONCLUSION

We developed a reliable and valid method to measure stem anteversion using hip AP view and trans-lateral decubitus view of the femur. This method can replace conventional radiological methods.

A focused update on preventing ceramic fractures in hip arthroplasty

Ceramic bearings have several desirable properties, such as resistance to wear, hardness, and biocompatibility, that favour it as an articulating surface in hip arthroplasty. However, ceramic fracture remains a concern. We have reviewed the contemporary literature, addressing the factors that can influence the incidence of ceramic bearing surface fracture.

Cite this article: Bone Joint J 2019;101-B:897–901.

Total Hip Arthroplasty Using Hybrid Ceramic Bearing: A Minimum 10-Year Followup Study

BACKGROUND

Contemporary ceramic articulation in total hip arthroplasty (THA) has shown successful clinical and radiologic outcomes at mid-to-long term. Delta ceramic, which includes 24% zirconia, has been developed to reduce the rate of ceramic fracture. However, the phase transformation of the zirconia that might cause surface roughness, ceramic wear, and subsequent osteolysis remains a concern. The purpose of this study was to evaluate clinicoradiological outcomes, ceramic-related complications, and survivorship of THA with the use of hybrid ceramic bearing; BIOLOX delta liner-on-BIOLOX forte head articulation at a minimum followup of 10 years.

MATERIALS AND METHODS

One hundred cementless THAs (85 patients) were performed with the use of 36-mm hybrid ceramic bearing. The thickness of the delta ceramic liner was 4-6 mm. Four patients (4 hips) were lost and six patients (6 hips) died within 10 years after the operation. Thus, the remaining 75 patients (90 hips) were followed up for 10-12 years. There were 43 men and 32 women. The mean age of these patients at the index operation was 58 years (21-78 years).

RESULTS

There were no fractures of ceramic liner or head. There was no measurable ceramic wear, and neither pelvic nor femoral osteolysis was identified. All acetabular and femoral components were bone-ingrown. Three (3/90, 3.3%) patients noted noise of clicking sound. The mean Harris hip score was 87 points (range 72-99 points) at the time of final followup. THA survivorship with revision surgery as an endpoint was 97.8% (95% confidence interval: 91.4%-99.8%).

CONCLUSIONS

The long term result of cementless THA with the use of a large BIOLOX forte head on the BIOLOX delta liner showed an encouraging result. Wear or osteolysis associated with composite of 24% zirconia in the fourth-generation ceramic was not observed at a minimum followup of 10 years.

Atraumatic Fracture of the BIOLOX delta Ceramic Liner in Well-Fixed Total Hip Implants

A newer alumina matrix composite ceramic (BIOLOX delta; CeramTec, Plochingen, Germany) was developed to improve resistance to wear while reducing the risk for fractures with alumina-on-alumina design. This article describes a case of fracture of the BIOLOX delta ceramic liner without history of trauma in well-fixed total hip implants. A 61-year-old woman underwent total hip replacement via the posterior approach 20 months earlier because of osteonecrosis of the femoral head. A cementless cup and a stem with a 52/36-mm BIOLOX delta couple bearing were used. The authors found signs of stripe wear on the inner surface of the ceramic liner, leading them to believe the possible cause of fracture in this patient was edge loading due to joint laxity. The authors performed revision surgery with the use of another ceramic couple-bearing implant and converted the head component from short to long (+4 mm). More cases should be collected to verify the mechanism of the fracture of the BIOLOX delta ceramic liner with a well-fixed cup. [Orthopedics. 2018; 41(6):e880-e883.].

Primary total hip arthroplasty with fourth-generation ceramic bearings: Clinical and survival results with a minimum follow-up of 5 years

OBJECTIVE

To evaluate the clinical results and survival of primary hip prosthesis with ceramic delta bearings (C-C) with a minimum follow-up of 5years.

MATERIAL AND METHOD

A total of 205 primary hip arthroplasties performed between 2008 and 2012 were studied. The clinical results, pre-surgical and at 5years of follow-up were evaluated using the Harris Hip Score (HHS), the Short Form-36 (SF-36), the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and the visual analogue scale (VAS). The position of the prosthetic components, periprosthetic osteolysis, loosening of the prosthetic components and ruptures of the ceramic components were studied radiologically. The adverse events related to bearings were recorded according to their diameter, paying special attention to prosthetic dislocations and the presence of noise. Survival with an endpoint of prosthetic revision for any cause was estimated using the Kaplan-Meier method.

RESULTS

Significant improvements were obtained in the HHS (88.7% of good/excellent results), SF36, WOMAC and EVA, P<.001. There were 19 adverse events related to the prosthesis (4 periprosthetic fractures, 4 dislocations, 2 superficial infections, 1 mobilization of the cup, 2 noises, 4 aseptic loosenings and 2 breaks of the prosthetic neck); 47.3% needed revision. The cumulative survival of the prostheses was 97.5% (95%CI: 96.4-98.5). No differences were found in survival, prosthetic adverse events, noise incidence or dislocations and clinical results among the different diameters used.

CONCLUSIONS

Primary hip prostheses with fourth-generation ceramic bearings showed good survival in the medium term, and good clinical results.

Clinical Outcomes and Bearing-Specific Complications Following Fourth-Generation Alumina Ceramic-on-Ceramic Total Hip Arthroplasty: A Single-Surgeon Series of 749 Hips at a Minimum of 5-Year Follow-Up

BACKGROUND

The purpose of this study is to evaluate the minimum 5-year outcomes and bearing-specific complications in a single surgeon series of fourth-generation alumina ceramic-on-ceramic total hip arthroplasties (THAs).

METHODS

We retrospectively analyzed 667 patients (749 hips) who underwent primary THAs by a single surgeon using fourth-generation alumina ceramic bearings. There were 315 men and 352 women with a mean age of 54.2 years. The surgeon used cementless prostheses with an identical design and BIOLOX Delta ceramics in all hips, using a 36-mm head in 472 hips (63%) and a 32-mm head in 227. The mean follow-up duration was 6.5 years (range, 5 to 8 years).

RESULTS

The mean Harris hip score improved from 45.6 points preoperatively to 91.3 points at final follow-up. All but 1 acetabular cup and all femoral stems were well fixed. No radiographic evidence of osteolysis was identified at final follow-up. There were 2 (0.3%) ceramic liner fractures and no ceramic head fractures. A total of 48 hips (6.4%) exhibited audible noise (29 clickings and 19 squeakings), but no patient required revision. Other complications were 1 dislocation, 1 deep infection, 3 iliopsoas tendonitis, and 6 periprosthetic femoral fractures. Kaplan-Meier survivorship for revision for any reason was 98.6% (95% confidence interval, 97.7-99.5) at 6.5 years.

CONCLUSION

Delta ceramic-on-ceramic THAs had a high rate of survivorship without radiographic evidence of osteolysis at 6.5-year follow-up. However, we found 0.3% ceramic liner fractures and 6.4% audible noises associated with the use of Delta ceramics.

Squeaking in fourth-generation ceramic-on-ceramic total hip replacement and the relationship with prosthesis brands: meta-analysis and systematic review

Background

Postoperative squeaking in patients who applied the fourth-generation ceramic bearing in primary hip replacement has not been reported systematically; we aim to study the squeaking incidence in the fourth-generation ceramic bearing and related risk factors for squeaking, and we also attempt to explore the relationship between squeaking and prosthetic brands.

Methods

The PubMed, Embase, and Cochrane library were searched, and 14 articles were finally included. Patients’ demographic data, surgical-related information, and prosthesis data were extracted. The occurrence rate of squeaking was calculated by meta-analysis, and subgroup analysis was performed based on prosthetic brands and follow-up time. Regression analysis was further applied to investigate the relationship between various risk factors and squeaking.

Results

The squeaking incidence in patients with the fourth-generation ceramic bearing was 3%. Age, gender, body mass index, and abduction and anteversion angles of acetabular cup might have no influence on squeaking. The squeaking incidence was significantly high with the presence of Delta Motion cup (DePuy, Warsaw, Indiana) and Secure-Fit stem (Stryker, Kalamazoo, MI), and the overall incidence of DePuy femoral stem was relatively small except for the Summit femoral stem. And there was no significant difference of squeaking incidence between less than 5-year and more than or equal to 5-year follow-up subgroups.

Conclusions

In our study, squeaking in the fourth-generation ceramic bearing occurred at a rate of 3%; occurrence rate was high when the Delta Motion cup was applied. We hope for more relevant researches to focus on this issue.

Electronic supplementary material

The online version of this article (10.1186/s13018-018-0841-y) contains supplementary material, which is available to authorized users.

Using Ceramic-on-Ceramic Bearings in Total Hip Arthroplasty Necessitating 44- or 46-mm Metal Shells

Ceramic-on-ceramic articulation shows the lowest wear, with a low incidence of osteolysis. A small cup limits options regarding liner thickness and femoral implant size. The purpose of this study was to evaluate the safety of a 4-mm-thick ceramic liner and the outcomes of cementless total hip arthroplasty using a 44- or 46-mm metal shell and a ceramic-on-ceramic bearing at mid- to long-term follow-up. Between May 2003 and June 2008, 80 patients (88 hips) who had hip osteoarthritis and a hypoplastic acetabulum underwent cementless total hip arthroplasty using a 44- or 46-mm metal shell and a ceramic-on-ceramic bearing. Sixty-eight of these patients (76 hips) were followed for an average of 8 years. The ceramic-related complications, clinical and radiological results, and Kaplan-Meier survivorship of these patients were evaluated. Mean Harris hip score had improved to 88 points (range, 49-100 points) at final follow-up. No ceramic fractures occurred during follow-up. All acetabular and femoral prostheses had bone ingrowth, and there was no measurable wear in any hip. In 1 patient, a radiolucent lesion occurred around the acetabular cup. Two hips underwent revision because of periprosthetic fractures. The survival rates of the acetabular cups and the femoral stems were 100% and 97.4%, respectively. The thin (4 mm) ceramic liner did not increase the risk of ceramic fracture and did not affect the mid- to long-term results and survival of cementless total hip arthroplasty using 44- or 46-mm metal shells. [Orthopedics. 2018; 41(3):e354-e359.].

Third-generation pure alumina and alumina matrix composites in total hip arthroplasty: What is the evidence?

Wear, corrosion and periprosthetic osteolysis are important causes of failure in joint arthroplasty, especially in young patients.

Ceramic bearings, developed 40 years ago, are an increasingly popular choice in hip arthroplasty. New manufacturing procedures have increased the strength and reliability of ceramic materials and reduced the risk of complications.

In recent decades, ceramics made of pure alumina have continuously improved, resulting in a surgical-grade material that fulfills clinical requirements.

Despite the track record of safety and long-term results, third-generation pure alumina ceramics are being replaced in clinical practice by alumina matrix composites, which are composed of alumina and zirconium.

In this review, the characteristics of both materials are discussed, and the long-term results with third-generation alumina-on-alumina bearings and the associated complications are compared with those of other available ceramics.

Cite this article: EFORT Open Rev 2018;3:7-14. DOI: 10.1302/2058-5241.3.170034