1
|
Gilg MM. CORR Insights®: Taper Junction Subsidence Occurs in Modular Tumor Endoprostheses: How Concerned Should We Be? Clin Orthop Relat Res 2024:00003086-990000000-01728. [PMID: 39244652 DOI: 10.1097/corr.0000000000003246] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 08/10/2024] [Accepted: 08/14/2024] [Indexed: 09/10/2024]
Affiliation(s)
- Magdalena Maria Gilg
- Department of Orthopaedics and Trauma, Medical University of Graz, Graz, Austria
| |
Collapse
|
2
|
Sacher SE, Baral EC, Wright TM, Bauer TW, Li Q, Padgett DE, Potter HG, Koff MF. Association of Total Hip Arthroplasty Flexural Rigidity With Magnetic Resonance Imaging and Histological Findings. J Arthroplasty 2024; 39:2116-2123.e1. [PMID: 38428693 DOI: 10.1016/j.arth.2024.02.072] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/11/2023] [Revised: 02/20/2024] [Accepted: 02/22/2024] [Indexed: 03/03/2024] Open
Abstract
BACKGROUND Modular connections in total hip arthroplasty (THA) offer surgical advantages, but can contribute to implant fretting and corrosion due to micromotion at the head-stem interface. Previous studies implicated lower flexural rigidity as a key contributing factor to THA corrosion and fretting, but none associated flexural rigidity with direct histological evaluation or magnetic resonance imaging (MRI) outcomes. The purpose of this study was to determine how implant flexural rigidity is associated with MRI imaging metrics and histopathological outcomes in patients who have a failed THA. METHODS Patients requiring revision THA surgery underwent preoperative MRIs with 3-dimensional multispectral imaging techniques to suppress metal artifacts. The MRI images were graded for adverse local tissue reactions. For each hip, trunnion flexural rigidity was measured from the retrieved femoral stem, and a periprosthetic tissue sample was retrieved and evaluated using semiquantitative histology. Generalized linear models and analyses of variance were used to assess associations between flexural rigidity and MRI and histology outcomes. RESULTS A total of 106 THA stems were retrieved (46 women and 60 men, age: 68 years (range, 60 to 73 years). After adjustment for length of implantation, flexural rigidity was negatively correlated with histologic aseptic lymphocyte-dominant vasculitis-associated lesion severity (β = -26.27, P = .018), Fujishiro lymphocyte grading (β = -13.4, P = .039), perivascular lymphocyte layers (β = -17.8, P = .022), the grade of tissue organization (β = -22.5, P = .009), the presence of diffuse synovitis (β = -66.5, P = .003), and the presence of lymphoid aggregates (β = -75.9, P = .022). No association was found between MRI metrics and flexural rigidity. CONCLUSIONS Among these implants, decreased trunnion stiffness was associated with increased histologic features of adverse host-mediated soft tissue reactions.
Collapse
Affiliation(s)
- Sara E Sacher
- Hospital for Special Surgery, Department of Radiology, New York, New York
| | - Elexis C Baral
- Hospital for Special Surgery, Department of Biomechanics, New York, New York
| | - Timothy M Wright
- Hospital for Special Surgery, Department of Biomechanics, New York, New York
| | - Thomas W Bauer
- Hospital for Special Surgery, Department of Pathology and Laboratory Medicine, New York, New York
| | - Qian Li
- Hospital for Special Surgery, Department of Radiology, New York, New York
| | - Douglas E Padgett
- Hospital for Special Surgery, Adult Reconstruction and Joint Replacement, New York, New York
| | - Hollis G Potter
- Hospital for Special Surgery, Department of Radiology, New York, New York
| | - Matthew F Koff
- Hospital for Special Surgery, Department of Radiology, New York, New York
| |
Collapse
|
3
|
Dolinar D, Kocjančič B, Avsec K, Šetina Batič B, Kocijan A, Godec M, Sedlaček M, Debeljak M, Grant JT, Zupanc T, Jenko M. Characterization of Micro-Threaded Stem Taper Surfaces of Cementless Hip Endoprostheses. MATERIALS (BASEL, SWITZERLAND) 2024; 17:2751. [PMID: 38894016 PMCID: PMC11173811 DOI: 10.3390/ma17112751] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/07/2024] [Revised: 05/26/2024] [Accepted: 05/29/2024] [Indexed: 06/21/2024]
Abstract
We investigated micro-threaded stem taper surface and its impact on premature failures, aseptic loosening, and infection in cementless hip endoprostheses. Our study focused on the fretting, and crevice corrosion of micro-threaded tapers, as well as the characterization of the microstructure and surface properties of two new and three retrieved Zweymüller stem tapers. The retrieved samples were selected and examined based on the head-stem taper interface being the sole source of modularity with a metallic component, specifically between the Ti alloy taper stem and the ceramic head. To determine the surface chemistry and microstructures of both new and retrieved hip endoprostheses stem taper titanium alloy, scanning -electron microscopy (SEM) was employed for morphological and microstructural analyses. Energy dispersive spectroscopy (EDS) was utilized for characterizing chemical element distribution, and electron backscattered diffraction (EBSD) was used for phase analysis. The roughness of the micro-threated stem tapers from different manufacturers was investigated using an optical profilometer, with standard roughness parameters Ra (average surface roughness) and Rz (mean peak to valley height of the roughness profile) being measured. Electrochemical studies revealed no fretting corrosion in retrieved stem tapers with ceramic heads. Consequently, three retrieved tapers and two new ones for comparison underwent potentiodynamic measurements in Hank's solution to determine the corrosion rate of new and retrieved stem taper surfaces. The results showed a low corrosion rate for both new and prematurely failed retrieved samples due to aseptic loosening. However, the corrosion rate was higher in infected and low-grade infected tapers. In conclusion, our study suggests that using ceramic heads reduces taper corrosion and subsequently decreases the incidence of premature failures in total hip arthroplasty.
Collapse
Affiliation(s)
- Drago Dolinar
- Department for Orthopaedic Surgery, University Medical Centre Ljubljana, Zaloška 9, 1000 Ljubljana, Slovenia; (D.D.); (B.K.); (K.A.); (T.Z.)
- Orthopaedic Surgery Chair, Faculty of Medicine, University of Ljubljana, Vrazov trg 2, 1000 Ljubljana, Slovenia
| | - Boštjan Kocjančič
- Department for Orthopaedic Surgery, University Medical Centre Ljubljana, Zaloška 9, 1000 Ljubljana, Slovenia; (D.D.); (B.K.); (K.A.); (T.Z.)
- Orthopaedic Surgery Chair, Faculty of Medicine, University of Ljubljana, Vrazov trg 2, 1000 Ljubljana, Slovenia
| | - Klemen Avsec
- Department for Orthopaedic Surgery, University Medical Centre Ljubljana, Zaloška 9, 1000 Ljubljana, Slovenia; (D.D.); (B.K.); (K.A.); (T.Z.)
- Orthopaedic Surgery Chair, Faculty of Medicine, University of Ljubljana, Vrazov trg 2, 1000 Ljubljana, Slovenia
| | - Barbara Šetina Batič
- Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia; (B.Š.B.); (A.K.); (M.G.); (M.S.)
| | - Aleksandra Kocijan
- Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia; (B.Š.B.); (A.K.); (M.G.); (M.S.)
| | - Matjaž Godec
- Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia; (B.Š.B.); (A.K.); (M.G.); (M.S.)
| | - Marko Sedlaček
- Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia; (B.Š.B.); (A.K.); (M.G.); (M.S.)
| | - Mojca Debeljak
- University Rehabilitation Institute Republic of Slovenia, Linhartova 51, 1000 Ljubljana, Slovenia;
| | - John T. Grant
- Research Institute, University of Dayton, Dayton, OH 45469, USA;
| | - Timon Zupanc
- Department for Orthopaedic Surgery, University Medical Centre Ljubljana, Zaloška 9, 1000 Ljubljana, Slovenia; (D.D.); (B.K.); (K.A.); (T.Z.)
| | - Monika Jenko
- MD-RI Institute for Materials Research in Medicine, Bohoričeva 5, 1000 Ljubljana, Slovenia
- MD Medicina, Sanatorium, Bohoričeva 5a, 1000 Ljubljana, Slovenia
| |
Collapse
|
4
|
Nishi M, Yoshikawa Y, Okano I, Kaji Y, Usui Y, Okamoto S, Nakamura S, Kudo Y, Nakamura M, Miyaoka H. Long-Term Outcomes of Cementless Bipolar Hemiarthroplasty in Young Patients With Osteonecrosis of the Femoral Head: The Impact of Implant Improvements and Preoperative Stage. Cureus 2024; 16:e57633. [PMID: 38707012 PMCID: PMC11069613 DOI: 10.7759/cureus.57633] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 04/04/2024] [Indexed: 05/07/2024] Open
Abstract
Introduction Advancements in bipolar hemiarthroplasty (BHA) implants in the mid-1990s contributed to favorable short-term outcomes for osteonecrosis of the femoral head (ONFH), particularly in cases without acetabular cartilage lesions. Nevertheless, long-term results remain unclear. In this study, we investigated (i) the impact of new-generation BHA implants and (ii) the effect of the preoperative stage on long-term outcomes in young patients with ONFH. Methods The records of consecutive patients with ONFH who underwent cementless BHA were retrospectively reviewed. Patients aged ≥60 years, with <10 years of follow-up, or who underwent acetabular reaming during surgery were excluded. Radiographical and clinical outcomes of patients who received first-generation BHAs and new-generation BHAs (developed after 1998) were compared by stratifying based on preoperative stage 2/3A and 3B/4, according to the Japanese Investigation Committee classification. Results Overall, 50 hips from 39 patients (mean age: 44.6 years; 64% male) with an average follow-up of 18.6 years were included. The frequency of advanced-stage patients was significantly higher in the first-generation BHA group than in the new-generation group. Regarding postoperative outcomes, the first-generation BHA group had higher acetabular erosion grades (p<0.001) and more femoral component loosening than those in the new-generation group (p<0.001). Revisions were performed in eight hips (seven in the first-generation and one in the new-generation BHA groups, p<0.001). In the new-generation BHA group, there were no significant differences in patient background between stage 2/3A and 3B/4 groups, and only one case in the stage 3B/4 group required revision. In the new-generation group, the grade of acetabular erosion was significantly higher for stage 3B/4 than stage 2/3A (p<0.001); other radiographical and clinical outcomes did not differ significantly between stages. Conclusion New-generation BHAs have significantly better implant survival rates for early-stage ONFH than those of first-generation BHAs. These findings indicate that BHA is an acceptable treatment option for early-stage ONFH in young patients.
Collapse
Affiliation(s)
- Masanori Nishi
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Yasushi Yoshikawa
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Ichiro Okano
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Yasutaka Kaji
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Yuki Usui
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Satoshi Okamoto
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Shota Nakamura
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Yoshifumi Kudo
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Masanori Nakamura
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| | - Hideyo Miyaoka
- Orthopaedic Surgery, Showa University School of Medicine, Tokyo, JPN
| |
Collapse
|
5
|
Soliman MM, Islam MT, Chowdhury MEH, Alqahtani A, Musharavati F, Alam T, Alshammari AS, Misran N, Soliman MS, Mahmud S, Khandakar A. Advancement in total hip implant: a comprehensive review of mechanics and performance parameters across diverse novelties. J Mater Chem B 2023; 11:10507-10537. [PMID: 37873807 DOI: 10.1039/d3tb01469j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2023]
Abstract
The UK's National Joint Registry (NJR) and the American Joint Replacement Registry (AJRR) of 2022 revealed that total hip replacement (THR) is the most common orthopaedic joint procedure. The NJR also noted that 10-20% of hip implants require revision within 1 to 10 years. Most of these revisions are a result of aseptic loosening, dislocation, implant wear, implant fracture, and joint incompatibility, which are all caused by implant geometry disparity. The primary purpose of this review article is to analyze and evaluate the mechanics and performance factors of advancement in hip implants with novel geometries. The existing hip implants can be categorized based on two parts: the hip stem and the joint of the implant. Insufficient stress distribution from implants to the femur can cause stress shielding, bone loss, excessive micromotion, and ultimately, implant aseptic loosening due to inflammation. Researchers are designing hip implants with a porous lattice and functionally graded material (FGM) stems, femur resurfacing, short-stem, and collared stems, all aimed at achieving uniform stress distribution and promoting adequate bone remodeling. Designing hip implants with a porous lattice FGM structure requires maintaining stiffness, strength, isotropy, and bone development potential. Mechanical stability is still an issue with hip implants, femur resurfacing, collared stems, and short stems. Hip implants are being developed with a variety of joint geometries to decrease wear, improve an angular range of motion, and strengthen mechanical stability at the joint interface. Dual mobility and reverse femoral head-liner hip implants reduce the hip joint's dislocation limits. In addition, researchers reveal that femoral headliner joints with unidirectional motion have a lower wear rate than traditional ball-and-socket joints. Based on research findings and gaps, a hypothesis is formulated by the authors proposing a hip implant with a collared stem and porous lattice FGM structure to address stress shielding and micromotion issues. A hypothesis is also formulated by the authors suggesting that the utilization of a spiral or gear-shaped thread with a matched contact point at the tapered joint of a hip implant could be a viable option for reducing wear and enhancing stability. The literature analysis underscores substantial research opportunities in developing a hip implant joint that addresses both dislocation and increased wear rates. Finally, this review explores potential solutions to existing obstacles in developing a better hip implant system.
Collapse
Affiliation(s)
- Md Mohiuddin Soliman
- Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi 43600, Malaysia.
| | - Mohammad Tariqul Islam
- Centre for Advanced Electronic and Communication Engineering, Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi 43600, Malaysia.
| | - Muhammad E H Chowdhury
- Department of Electrical Engineering, College of Engineering, Qatar University, Doha 2713, Qatar.
| | - Abdulrahman Alqahtani
- Department of Medical Equipment Technology, College of Applied, Medical Science, Majmaah University, Majmaah City 11952, Saudi Arabia
- Department of Biomedical Technology, College of Applied Medical Sciences in Al-Kharj, Prince Sattam Bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia.
| | - Farayi Musharavati
- Department of Mechanical & Industrial Engineering, Qatar University, Doha 2713, Qatar.
| | - Touhidul Alam
- Pusat Sains Ankasa (ANGKASA), Institut Perubahan Iklim, Universiti Kebangsaan Malaysia (UKM), Bangi 43600, Selangor, Malaysia.
| | - Ahmed S Alshammari
- Department of Electrical Engineering, College of Engineering, University Hail, Hail 81481, Saudi Arabia.
- Department of Electrical Engineering, College of Engineering, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia.
| | - Norbahiah Misran
- Centre for Advanced Electronic and Communication Engineering, Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia (UKM), Bangi 43600, Malaysia.
| | - Mohamed S Soliman
- Department of Electrical Engineering, College of Engineering, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia.
- Department of Electrical Engineering, Faculty of Energy Engineering, Aswan University, Aswan, 81528, Egypt
| | - Sakib Mahmud
- Department of Electrical Engineering, College of Engineering, Qatar University, Doha 2713, Qatar.
| | - Amith Khandakar
- Department of Electrical Engineering, College of Engineering, Qatar University, Doha 2713, Qatar.
| |
Collapse
|
6
|
Taheriazam A, Baghbani S, Amiri S, Jahanshahi F. Trunnionosis in metal-on-polyethylene total hip arthroplasties: Report two cases. Int J Surg Case Rep 2023; 109:108623. [PMID: 37542879 PMCID: PMC10428132 DOI: 10.1016/j.ijscr.2023.108623] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2023] [Revised: 08/01/2023] [Accepted: 08/01/2023] [Indexed: 08/07/2023] Open
Abstract
INTRODUCTION AND IMPORTANCE Several studies have discussed trunnionosis in metal-on-metal total hip arthroplasties. However, trunnionosis in metal-on-polyethylene total hip arthroplasties has been less frequently discussed. CASE PRESENTATION In this study, trunnionosis in two male patients undergoing metal-on-polyethylene total hip arthroplasty, which was done to treat femoral head osteonecrosis were reported and discussed adequately. CLINICAL DISCUSSION Total hip arthroplasties (THA) were done for the treatment of femoral head osteonecrosis in these cases. In the first case, trunnionosis occurred one year after the revision of the primary THA, and in the second case occurred ten years after the primary THA. Both of these cases were presented with reduced range of motion. After surgery, the symptoms were resolved, and the patients remained complication-free until the last follow-up. CONCLUSION This report raises awareness regarding the importance of trunnionosis as a serious complication of modular total hip arthroplasty.
Collapse
Affiliation(s)
- Afshin Taheriazam
- Department of Orthopaedics, Faculty of Medicine, Tehran Medical Sciences, Islamic Azad University, Tehran, Iran
| | - Salar Baghbani
- Sina Hospital, School of Medicine, Tehran University of Medical Sciences, Tehran, Iran
| | - Shayan Amiri
- Assistant Professor of Orthopaedic Surgery, Shohadaye Haftom-e-Tir Hospital, School of Medicine, Iran University of Sciences, Tehran, Iran
| | - Fatemeh Jahanshahi
- Research Committee Member, Faculty of Medicine, Iran University of Medical Sciences, Tehran, Iran.
| |
Collapse
|
7
|
Rainey JP, Gililland JM, Peters CL, Archibeck MJ, Anderson LA, Pelt CE. Metallosis and Corrosion Associated With Revision Total Knee Arthroplasties With Metaphyseal Sleeves. Arthroplast Today 2023; 22:101167. [PMID: 37521734 PMCID: PMC10372174 DOI: 10.1016/j.artd.2023.101167] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/25/2023] [Revised: 05/27/2023] [Accepted: 05/30/2023] [Indexed: 08/01/2023] Open
Abstract
Metallosis and corrosion have been associated with metal-on-metal and modular total hip arthroplasty but are rarely described in the setting of primary or revision total knee arthroplasty (TKA). In this series, we report on cases of metallosis due to mechanically assisted crevice corrosion at modular junctions of machined trunnion-bore tapers in a revision TKA system with metaphyseal sleeves. The unique design of metal modular junctions used in sleeve-based revision TKA, along with potential patient and surgical factors, may predispose these designs to fretting, corrosion, and adverse reaction to metal debris. We now consider metallosis and corrosion in the workup of painful or failed revision TKAs with sleeves. Future studies that investigate the incidence of this phenomenon may be warranted.
Collapse
Affiliation(s)
| | | | | | | | | | - Christopher E. Pelt
- Corresponding author. 590 Wakara Way, Salt Lake City, UT 84108, USA. Tel.: +1 801 703 4046.
| |
Collapse
|
8
|
Trunnions and Modularity in Total Hip Arthroplasty: A Historical Review With Current Clinical Implications. J Am Acad Orthop Surg 2023; 31:189-197. [PMID: 36728328 DOI: 10.5435/jaaos-d-22-00498] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 06/07/2022] [Accepted: 11/27/2022] [Indexed: 02/03/2023] Open
Abstract
Trunnion in total hip arthroplasty refers to the interface between the neck of a femoral stem and the femoral head. Clinical complications arising from damage to this junction, whether it be due to mechanical wear, corrosion, or a combination, are referred to as mechanically assisted crevice corrosion (MACC), also commonly known as trunnionosis. With the use of modular hip prostheses, which help customize offset and leg length to an individual patient's anatomy, the incidence of MACC and revision due to MACC has increased in recent years. Although the cause of MACC is multifactorial, with patient factors and technique factors contributing to this condition, taper design and geometry, metallurgical properties of implants, and size mismatch of the bearing couple are some of the implant factors that have also been implicated in this clinical phenomenon. Understanding the history of taper design and geometry, the track record of older implants, and the rationale behind the development of current prostheses can help surgeons choose the right implants for their patients and accurately assess the pros and cons of new implants being introduced to the market each year.
Collapse
|
9
|
Martelli A, Erani P, Pazzagli N, Cannillo V, Baleani M. Surface Analysis of Ti-Alloy Micro-Grooved 12/14 Tapers Assembled to Non-Sleeved and Sleeved Ceramic Heads: A Comparative Study of Retrieved Hip Prostheses. MATERIALS (BASEL, SWITZERLAND) 2023; 16:1067. [PMID: 36770073 PMCID: PMC9920329 DOI: 10.3390/ma16031067] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/25/2022] [Revised: 01/16/2023] [Accepted: 01/18/2023] [Indexed: 06/18/2023]
Abstract
Ti6Al4V titanium alloy (Ti-alloy) sleeved ceramic heads have become widely used in revision surgery when the hip stem is left in situ. This solution guarantees a new junction between the bore of the ceramic head and the Ti-alloy sleeve, regardless of any possible, slight surface damage to the Ti-alloy taper of the stem. However, this solution introduces an additional Ti-alloy/Ti-alloy interface pairing, which is potentially susceptible to mechanically assisted crevice corrosion. This study evaluated both qualitatively and quantitatively the damage that occurred in vivo on Ti-alloy micro-grooved 12/14 tapers of (i) primary implants with non-sleeved ceramic heads (Group 1), (ii) secondary implants with non-sleeved ceramic heads (Group 2), and (iii) secondary implants with sleeved ceramic heads (Group 3). A total of 45 explants-15 for each group, including short-, medium- and long-neck heads-underwent optical evaluation for surface damage (Goldberg scoring), surface roughness analysis, and SEM/EDX analysis. The Goldberg scores did not reveal different patterns in the tapers' surface damage; surface damage was classified as absent or mild (surface damage score ≤2) in 94%, another 94%, and 92% of the analysed regions for Group 1, Group 2, and Group 3, respectively. Small but significant differences in morphological changes occurred in the tapers of the three groups: reductions no greater than a few percentage points in median values of roughness parameters were found in Group 1 and Group 2, while negligible changes were found in Group 3. SEM/EDX analysis revealed little (i.e., a slight increase in the oxygen content) to undetectable changes in the chemical composition on the Ti-alloy surface independently of the group. These results suggest that the Ti-alloy/Ti-alloy sleeve/taper junction is only mildly susceptible to mechanically assisted crevice corrosion. Assembling a sleeved ceramic head, with variable neck lengths up to a "long-neck", to a Ti-alloy micro-grooved 12/14 taper of a stem left in situ does not seem to increase the risk of revision due to trunnionosis, as long as junction stability (i.e., the proper seating of the sleeved ceramic head on the 12/14 taper) is achieved intraoperatively.
Collapse
Affiliation(s)
- Andrea Martelli
- Laboratorio di Tecnologia Medica, IRCCS Istituto Ortopedico Rizzoli, 40136 Bologna, Italy
- Dipartimento di Ingegneria Enzo Ferrari, Università degli Studi di Modena e Reggio Emilia, 41125 Modena, Italy
| | - Paolo Erani
- Laboratorio di Tecnologia Medica, IRCCS Istituto Ortopedico Rizzoli, 40136 Bologna, Italy
| | - Nicola Pazzagli
- Laboratorio di Tecnologia Medica, IRCCS Istituto Ortopedico Rizzoli, 40136 Bologna, Italy
| | - Valeria Cannillo
- Dipartimento di Ingegneria Enzo Ferrari, Università degli Studi di Modena e Reggio Emilia, 41125 Modena, Italy
| | - Massimiliano Baleani
- Laboratorio di Tecnologia Medica, IRCCS Istituto Ortopedico Rizzoli, 40136 Bologna, Italy
| |
Collapse
|
10
|
Di Luzio M, Ronchi A, Amabile M, Tassinari E, Oddone M, D’Agostino G. Correlation Between Co Levels in Hair and Blood of Patients Who Underwent Metal-on-metal Hip Arthroplasty. Arthroplast Today 2022; 18:63-67. [PMID: 36275491 PMCID: PMC9582565 DOI: 10.1016/j.artd.2022.09.006] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 06/08/2022] [Revised: 09/06/2022] [Accepted: 09/12/2022] [Indexed: 11/06/2022] Open
Abstract
Background The purpose of this paper is to study the dependence of Co levels in hair on Co levels in blood after metal-on-metal (MoM) hip replacement and prove the suitability of hair analysis coupled to blood analysis in the decision process regarding implant revision evaluation. Methods Hair samples of 19 MoM patients having both well-functioning and malfunctioning implants and Co mass concentration levels in blood between 0.2 μg L-1 and 221.0 μg L-1 were included. A method based on inductively coupled plasma mass spectrometry was validated and used to measure the Co level in hair. Results The Co mass fraction in the hair of patients ranged between 0.011 mg kg-1 and 0.712 mg kg-1. A correlation analysis showed a statistically significant positive correlation (r = 0.932, P < .001) between Co in the hair and that in the blood in the full-level range and a statistically nonsignificant positive correlation (r = 0.595, P = .091) in the low-level range. Conclusions A correlation between the Co level in the hair and that in the blood exists when the latter is clearly above the 7 μg L-1 mass concentration threshold suggested for implant revision evaluation. The correlation disappears when the Co level in blood approaches or falls down the mass concentration threshold and that in the hair approaches or falls within the normal population range of 0.004-0.14 mg kg-1. Accordingly, clinicians could consider a hair analysis coupled to a blood analysis to assess the revision of malfunctioning MoM implants that release metals in patient’s body.
Collapse
Affiliation(s)
- Marco Di Luzio
- Istituto Nazionale di Ricerca Metrologica (INRIM), Pavia, Italy
| | - Anna Ronchi
- Laboratorio di Tossicologia Clinica e Sperimentale, Centro Antiveleni di Pavia - Centro Nazionale di Informazione Tossicologica, Istituti Clinici Sientifici Maugeri IRCCS Pavia, Pavia, Italy
| | - Marilina Amabile
- Laboratorio di Tecnologia Medica, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy
| | - Enrico Tassinari
- Ortopedia-Traumatologia e Chirurgia protesica e dei reimpianti d'anca e di ginocchio, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy
| | - Massimo Oddone
- Istituto Nazionale di Ricerca Metrologica (INRIM), Pavia, Italy,Dipartimento di Chimica, Università di Pavia, Pavia, Italy
| | - Giancarlo D’Agostino
- Istituto Nazionale di Ricerca Metrologica (INRIM), Pavia, Italy,Corresponding author. Istituto Nazionale di Ricerca Metrologica (INRIM), via Taramelli 12, 27100 Pavia, Italy. Tel.: +39 3493208619.
| |
Collapse
|
11
|
Grothe T, Günther KP, Hartmann A, Blum S, Haselhoff R, Goronzy J. The incidence of adverse local tissue reaction due to head taper corrosion after total hip arthroplasty using V40 taper and 36 mm CoCr head. Bone Joint J 2022; 104-B:852-858. [PMID: 35775169 DOI: 10.1302/0301-620x.104b7.bjj-2021-1769.r1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Abstract
AIMS Head-taper corrosion is a cause of failure in total hip arthroplasty (THA). Recent reports have described an increasing number of V40 taper failures with adverse local tissue reaction (ALTR). However, the real incidence of V40 taper damage and its cause remain unknown. The aim of this study was to evaluate the long-term incidence of ALTR in a consecutive series of THAs using a V40 taper and identify potentially related factors. METHODS Between January 2006 and June 2007, a total of 121 patients underwent THA using either an uncemented (Accolade I, made of Ti12Mo6Zr2Fe; Stryker, USA) or a cemented (ABG II, made of cobalt-chrome-molybdenum (CoCrMo); Stryker) femoral component, both with a V40 taper (Stryker). Uncemented acetabular components (Trident; Stryker) with crosslinked polyethylene liners and CoCr femoral heads of 36 mm diameter were used in all patients. At a mean folllow-up of 10.8 years (SD 1.1), 94 patients (79%) were eligible for follow-up (six patients had already undergone a revision, 15 had died, and six were lost to follow-up). A total of 85 THAs in 80 patients (mean age 61 years (24 to 75); 47 (56%) were female) underwent clinical and radiological evaluation, including the measurement of whole blood levels of cobalt and chrome. Metal artifact reduction sequence MRI scans of the hip were performed in 71 patients. RESULTS A total of 20 ALTRs were identified on MRI, with an incidence of 26%. Patients with ALTR had significantly higher median Co levels compared with those without ALTR (2.96 μg/l (interquartile range (IQR) 1.35 to 4.98) vs 1.44 μg/l (IQR 0.79 to 2.5); p = 0.019). Radiological evidence of osteolysis was also significantly associated with ALTR (p = 0.014). Median Cr levels were not significantly higher in those with ALTR compared with those without one (0.97 μg/l (IQR 0.72 to 1.9) v 0.67 μg/l (IQR 0.5 to 1.19; p = 0.080). BMI, sex, age, type of femoral component, head length, the inclination of the acetabular component, and heterotopic ossification formation showed no significant relationship with ALTR. CONCLUSION Due to the high incidence of local ALTR in our cohort after more than ten years postoperatively, we recommend regular follow-up investigation even in asymptomatic patients with V40 taper and metal heads. As cobalt levels correlate with ALTR occurrence, routine metal ion screening and consecutive MRI investigation upon elevation could be discussed. Cite this article: Bone Joint J 2022;104-B(7):852-858.
Collapse
Affiliation(s)
- Tim Grothe
- Centre of Orthopaedics, Trauma and Plastic Surgery, University Hospital Carl Gustav Carus, Technical University Dresden, Dresden, Germany
| | - Klaus-Peter Günther
- Centre of Orthopaedics, Trauma and Plastic Surgery, University Hospital Carl Gustav Carus, Technical University Dresden, Dresden, Germany
| | - Albrecht Hartmann
- Centre of Orthopaedics, Trauma and Plastic Surgery, University Hospital Carl Gustav Carus, Technical University Dresden, Dresden, Germany
| | - Sophia Blum
- Department of Radiology, University Hospital Carl Gustav Carus, Technical University Dresden, Dresden, Germany
| | - Richard Haselhoff
- Centre of Orthopaedics, Trauma and Plastic Surgery, University Hospital Carl Gustav Carus, Technical University Dresden, Dresden, Germany
| | - Jens Goronzy
- Centre of Orthopaedics, Trauma and Plastic Surgery, University Hospital Carl Gustav Carus, Technical University Dresden, Dresden, Germany
| |
Collapse
|
12
|
Bormann T, Nebel L, Müller U, Mai PT, Gibmeier J, Renkawitz T, Kretzer JP. Influence of FeCl 3 and H 2O 2 in corrosion testing of modular taper connections in total hip arthroplasty: An in vitro study. Acta Biomater 2022; 145:427-435. [PMID: 35417798 DOI: 10.1016/j.actbio.2022.04.007] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2022] [Revised: 03/22/2022] [Accepted: 04/06/2022] [Indexed: 11/29/2022]
Abstract
Corrosion at the modular taper junctions in total hip arthroplasty is clinically relevant because wear particles and ions generated at this interface can lead to adverse local tissue reactions or even implant failure. In vitro tribo-corrosion tests are usually accomplished in saline solutions or calf serum (CS), but the addition of H2O2 and FeCl3 have been suggested to mimic inflammatory conditions in the joint. Inflammatory conditions may aggravate corrosive processes and, therefore, should lead in vitro to a more severe and realistic tribo-corrosive material attack. Corrosion testing at 12/14 tapers comprising a CoCrMo head taper and a Ti6Al4V trunnion was accomplished in five electrolytes (Ringer's solution (RS), RS with 30 mM H2O2 and/or 0.7 mM FeCl3 and CS) under dynamical loading for five million cycles. Resulting material loss was determined gravimetrically and by ion analysis. The tribo-corrosive material degradation was investigated by light and electron microscopy. FeCl3 enhanced the material loss from taper connections while H2O2 did not lead to a significant alteration of total material loss. In comparison to pure RS, corrosion testing in CS decreased material loss at the head taper while it increased material loss at the trunnion. The combination of FeCl3 and H2O2 led to an enhanced occurrence of micro cracks at the trunnion surface. Adding FeCl3 and optionally also H2O2 aggravates material loss in in vitro corrosion testing of taper junctions and leads to harsher and probably more realistic testing conditions. STATEMENT OF SIGNIFICANCE: Tribo-corrosive processes at taper connections in hip implants are complex and can lead to major clinical implications. Joint inflammation is assumed to aggravate taper corrosion in vivo, why FeCl3 and H2O2 have been proposed as additives to electrolytes to simulate inflammatory conditions in vitro. Often used fretting test setups, however, do not involve real taper geometries. Besides, testing is often accomplished in saline solutions or calf serum, which do not induce a clinically significant amount of corrosive material degradation. This study presents an approach to increase tribo-corrosive processes at realistic taper connections by adding FeCl3 and/or H2O2. Unlike H2O2, FeCl3 increased material loss from taper connections. The combination of both additives enhanced micro crack formation at the trunnion surfaces.
Collapse
Affiliation(s)
- Therese Bormann
- Laboratory of Biomechanics and Implant Research, Department of Orthopaedics, Heidelberg University Hospital, Schlierbacher Landstrasse 200a, Heidelberg 69118, Germany.
| | - Laura Nebel
- Laboratory of Biomechanics and Implant Research, Department of Orthopaedics, Heidelberg University Hospital, Schlierbacher Landstrasse 200a, Heidelberg 69118, Germany
| | - Ulrike Müller
- Laboratory of Biomechanics and Implant Research, Department of Orthopaedics, Heidelberg University Hospital, Schlierbacher Landstrasse 200a, Heidelberg 69118, Germany
| | - Phuong Thao Mai
- Institute for Applied Materials, Karlsruhe Institute of Technology, Engelbert-Arnold-Strasse 4, Karlsruhe 76131, Germany
| | - Jens Gibmeier
- Institute for Applied Materials, Karlsruhe Institute of Technology, Engelbert-Arnold-Strasse 4, Karlsruhe 76131, Germany
| | - Tobias Renkawitz
- Laboratory of Biomechanics and Implant Research, Department of Orthopaedics, Heidelberg University Hospital, Schlierbacher Landstrasse 200a, Heidelberg 69118, Germany
| | - J Philippe Kretzer
- Laboratory of Biomechanics and Implant Research, Department of Orthopaedics, Heidelberg University Hospital, Schlierbacher Landstrasse 200a, Heidelberg 69118, Germany
| |
Collapse
|
13
|
McCarty CP, Park SH, Ho NC, Sangiorgio SN, Ebramzadeh E. Taper Material Loss in Total Hip Replacements: Is It Affected by Joint Friction? J Bone Joint Surg Am 2022; 104:796-804. [PMID: 35167500 DOI: 10.2106/jbjs.21.00579] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
BACKGROUND Metal debris and corrosion products generated from the taper junctions of modular joint replacements have been recognized as contributors to failure. Therefore, understanding the factors associated with increased taper wear and corrosion is fundamental to improving implant performance. METHODS A cohort of 85 large-diameter metal-on-metal heads and cups retrieved at revision surgery, after 10 to 96 months of service, was evaluated. First, metrology was conducted to quantify head taper material loss and implant articular surface wear. Then, joint frictional moments for each retrieved head-and-cup pair were measured during 10 cycles of simulated physiological gait in a biomechanical model. Taper material loss was evaluated for correlations with frictional moments, articular wear, head diameter, head-cup clearance, and time in vivo. RESULTS Peak resultant frictional moments ranged from 9.1 to 26.3 Nm, averaging 17.3 ± 2.7 Nm. Fretting and corrosion damage during in vivo service resulted in material loss from the head tapers ranging between 0.04 and 25.57 mm3, compared with combined head and cup articular wear of 0.80 to 351.75 mm3 in this cohort. Taper material loss was not correlated with higher frictional moments (R = -0.20 to 0.11, p = 0.07 to 0.81). Higher frictional moments from axial rotation were correlated with higher head and cup wear (R = 0.33, p < 0.01). The correlation between taper material loss and head diameter was weak and did not reach statistical significance (R = 0.20, p = 0.07). Taper material loss was not correlated with nominal head-cup clearance (R = 0.06, p = 0.6). Finally, taper material loss increased significantly over time (R = 0.34, p < 0.01). CONCLUSIONS Despite serious concerns regarding trunnionosis, volumes of head taper wear were generally lower than those of articular surface wear. There was no statistical correlation between taper wear and frictional moments. Therefore, the results suggest that high friction in metal-on-metal implants does not contribute to higher material loss at the head taper, despite high bending moments. CLINICAL RELEVANCE The amount of metal debris and corrosion products from taper junctions of the joint arthroplasties, widely recognized as an insidious cause of failure, was not correlated with joint frictional moments. Multiple factors affect taper wear: implant design, material, size, surface finish, and patient weight and activity level. However, in the present cohort, high friction of metal-on-metal total hip replacements likely did not contribute to increased volume of material loss at taper interfaces, despite increased moments at the locations of taper material loss.
Collapse
Affiliation(s)
- Colin P McCarty
- The J. Vernon Luck, Sr., M.D. Orthopaedic Research Center, Orthopaedic Institute for Children in Alliance with UCLA, Los Angeles, California
| | | | | | | | | |
Collapse
|
14
|
Sliding Corrosion Fatigue of Metallic Joint Implants: A Comparative Study of CoCrMo and Ti6Al4V in Simulated Synovial Environments. LUBRICANTS 2022. [DOI: 10.3390/lubricants10040065] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
Mechanical contact in a corrosive synovial environment leads to progressive surface damage at the modular interface of the joint implants. The wear debris and corrosion products degrade the synovial fluids and change the lubrication mechanisms at the joints. Consequently, the unstable joint lubrication and corrosion products will further induce the undesirable performance of the joint implants. In this study, the two major joint materials, CoCrMo and Ti6Al4V, were tested during the course of reciprocal sliding contact in simulated synovial liquids. Open circuit potential and coefficient of friction were monitored to describe electrochemical and mechanical responses. Potentiostatic test results illustrated electrochemical damage on both surfaces that modified oxidation chemistry on both surfaces. However, more significant modification of the CoCrMo surface was detected during wear in the simulated joint liquid. Even with a reduced coefficient of friction on the CoCrMo surface in sodium lactate environments, fretting current density drastically increased in corrosive sodium lactate with pH 2. However, the test results from the Ti6Al4V surface presented less coefficient of friction values, and moderate change in fretting current. Therefore, the experimental study concluded that the biocompatibility of Ti6Al4V is superior to that of CoCrMo in the combined effect of mechanical loadings and an electrochemical environment.
Collapse
|
15
|
Karachalios TS, Komnos GA. Morse taper and femoral head modularity: a technical note. Hip Int 2022; 32:237-238. [PMID: 35317636 DOI: 10.1177/11207000221082647] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Affiliation(s)
- Theofilos S Karachalios
- Orthopaedic Department, University General Hospital of Larissa, School of Health Sciences, Faculty of Medicine, University of Thessalia, Larissa, Greece
| | - George A Komnos
- Orthopaedic Department, University General Hospital of Larissa, School of Health Sciences, Faculty of Medicine, University of Thessalia, Larissa, Greece
| |
Collapse
|
16
|
Solórzano-Requejo W, Ojeda C, Díaz Lantada A. Innovative Design Methodology for Patient-Specific Short Femoral Stems. MATERIALS 2022; 15:ma15020442. [PMID: 35057160 PMCID: PMC8778668 DOI: 10.3390/ma15020442] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/12/2021] [Revised: 01/01/2022] [Accepted: 01/04/2022] [Indexed: 12/18/2022]
Abstract
The biomechanical performance of hip prostheses is often suboptimal, which leads to problems such as strain shielding, bone resorption and implant loosening, affecting the long-term viability of these implants for articular repair. Different studies have highlighted the interest of short stems for preserving bone stock and minimizing shielding, hence providing an alternative to conventional hip prostheses with long stems. Such short stems are especially valuable for younger patients, as they may require additional surgical interventions and replacements in the future, for which the preservation of bone stock is fundamental. Arguably, enhanced results may be achieved by combining the benefits of short stems with the possibilities of personalization, which are now empowered by a wise combination of medical images, computer-aided design and engineering resources and automated manufacturing tools. In this study, an innovative design methodology for custom-made short femoral stems is presented. The design process is enhanced through a novel app employing elliptical adjustment for the quasi-automated CAD modeling of personalized short femoral stems. The proposed methodology is validated by completely developing two personalized short femoral stems, which are evaluated by combining in silico studies (finite element method (FEM) simulations), for quantifying their biomechanical performance, and rapid prototyping, for evaluating implantability.
Collapse
Affiliation(s)
- William Solórzano-Requejo
- Product Development Laboratory, Department of Mechanical Engineering, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain
- Mechanical Technology Laboratory, Department of Mechanical and Electrical Engineering, Universidad de Piura, Piura 20009, Peru; or
- Correspondence: or (W.S.-R.); (A.D.L.)
| | - Carlos Ojeda
- Mechanical Technology Laboratory, Department of Mechanical and Electrical Engineering, Universidad de Piura, Piura 20009, Peru; or
| | - Andrés Díaz Lantada
- Product Development Laboratory, Department of Mechanical Engineering, Universidad Politécnica de Madrid, C/José Gutiérrez Abascal 2, 28006 Madrid, Spain
- Correspondence: or (W.S.-R.); (A.D.L.)
| |
Collapse
|
17
|
Stockhausen KE, Riedel C, Belinski AV, Rothe D, Gehrke T, Klebig F, Gebauer M, Amling M, Citak M, Busse B. Variability in stem taper surface topography affects the degree of corrosion and fretting in total hip arthroplasty. Sci Rep 2021; 11:9348. [PMID: 33931680 PMCID: PMC8087796 DOI: 10.1038/s41598-021-88234-3] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2020] [Accepted: 03/19/2021] [Indexed: 12/29/2022] Open
Abstract
Degradation at the modular head-neck interface in total hip arthroplasty (THA) is predominately expressed in the form of corrosion and fretting, potentially causing peri-prosthetic failure by adverse reactions to metal debris. This retrieval study aimed to quantify variations in stem taper surface topographies and to assess the influence on the formation of corrosion and/or fretting in titanium alloy stem tapers combined with metal and ceramic heads. Four hip stem designs (Alloclassic, CLS, Bicontact and SL-Plus) were characterized using high-resolution 3D microscopy, and corrosion and fretting were rated using the Goldberg scoring scheme. Quantification of the taper surface topographies revealed a high variability in surface characteristics between threaded stem tapers: Alloclassic and CLS tapers feature deeply threaded trapezoid-shaped profiles with thread heights over 65 µm. The sawtooth-shaped Bicontact and triangular SL-Plus taper are characterized by low thread heights below 14 µm. Significantly lower corrosion and fretting scores were observed in lightly threaded compared to deeply threaded tapers in ceramic head combinations. No significant differences in corrosion or fretting scores with thread height were found in pairings with metal heads. Understanding the relationship between stem taper surface topography and the formation of corrosion and fretting could help to improve the performance of modern THAs and lead to longer-lasting clinical results.
Collapse
Affiliation(s)
- Kilian Elia Stockhausen
- Department of Osteology and Biomechanics, University Medical Center Hamburg-Eppendorf, Lottestr. 55a, 22529, Hamburg, Germany
| | - Christoph Riedel
- Department of Osteology and Biomechanics, University Medical Center Hamburg-Eppendorf, Lottestr. 55a, 22529, Hamburg, Germany
| | - Alex Victoria Belinski
- Department of Osteology and Biomechanics, University Medical Center Hamburg-Eppendorf, Lottestr. 55a, 22529, Hamburg, Germany.,Department of Mechanical Engineering, University of California, 6141 Etcheverry Hall, Berkeley, CA, USA
| | - Dorothea Rothe
- Department of Orthopedic Surgery, Helios ENDO-Klinik, Holstenstraße 2, 22767, Hamburg, Germany
| | - Thorsten Gehrke
- Department of Orthopedic Surgery, Helios ENDO-Klinik, Holstenstraße 2, 22767, Hamburg, Germany
| | - Felix Klebig
- Department of Orthopedic Surgery, Helios ENDO-Klinik, Holstenstraße 2, 22767, Hamburg, Germany
| | - Matthias Gebauer
- Department of Orthopedic Surgery, Helios ENDO-Klinik, Holstenstraße 2, 22767, Hamburg, Germany
| | - Michael Amling
- Department of Osteology and Biomechanics, University Medical Center Hamburg-Eppendorf, Lottestr. 55a, 22529, Hamburg, Germany
| | - Mustafa Citak
- Department of Orthopedic Surgery, Helios ENDO-Klinik, Holstenstraße 2, 22767, Hamburg, Germany
| | - Björn Busse
- Department of Osteology and Biomechanics, University Medical Center Hamburg-Eppendorf, Lottestr. 55a, 22529, Hamburg, Germany. .,Interdisciplinary Competence Center for Interface Research (ICCIR), Martinistr. 52, 20251, Hamburg, Germany. .,Forum Medical Technology Health Hamburg (FMTHH), Butenfeld 34, 22529, Hamburg, Germany.
| |
Collapse
|