Intervertebral disc disorganization is related to trabecular bone architecture in the lumbar spine

Age- and sex-related changes in vertebral trabecular bone architecture in Neolithic and Mediaeval populations from Poland

This paper investigates trabecular bone ontogenetic changes in two different Polish populations, one prehistoric and the other historical. The studied populations are from the Brześć Kujawski region in Kujawy (north-central Poland), one from the Neolithic Period (4500-4000 BC) and one from the Middle Ages (twelfth-sixteenth centuries AD), in total 62 vertebral specimens (32 males, 30 females). Eight morphometric parameters acquired from microCT scan images were analysed. Two-way ANOVA after Box-Cox transformation and multifactorial regression model were calculated. A significant decrease in percentage bone volume fraction (BV/TV; [%]) with age at death was observed in the studied sample; Tb.N (trabecular number) was also significantly decreased with age; trabecular separation (Tb.Sp) increased with advancing age; connectivity density (Conn.D) was negatively correlated with biological age and higher in the Neolithic population. These data are found to be compatible with data from the current biomedical literature, while no loss of horizontal trabeculae was recorded as would be expected based on modern osteoporosis.

Low hounsfield unit values at sagittal section on computed tomography predicts vertebral fracture following short spinal fusion

BACKGROUND

Preoperative identification of osteoporosis during spine surgery is of critical importance. Additionally, the Hounsfield units (HU) measured using computed tomography (CT) have gained considerable attention. This study aimed to propose a more accurate and convenient screening method for predicting vertebral fractures after spinal fusion in elderly patients by analyzing the HU value of different range of interests of thoracolumbar spine.

METHODS

Our sample pool for analysis consisted of 137 elderly female patients aged >70 years who underwent one- or two-level spinal fusion surgery with a diagnosis of adult degenerative lumbar disease. The HU values of the anterior 1/3 of the vertebral bodies based on sagittal plane and those of vertebral bodies based on axial plane at T11-L5 were measured using the perioperative CT. The incidence of postoperative vertebral fractures with respect to the HU value was investigated.

RESULTS

Vertebral fractures were identified in 16 patients during the mean follow-up period of 3.8 years. While no significant association was found between HU value of L1 vertebral body or minimum HU value from axial plane and the incidence of the postoperative vertebral fracture, the minimum vertebral HU value of the anterior 1/3 of vertebral body from sagittal plane was associated with the incidence of the postoperative vertebral fracture. Patients with a minimum anterior 1/3 vertebral HU value of <80 had a higher incidence of postoperative vertebral fractures. The adjacent vertebral fractures occurred at the level of the vertebra with the lowest HU value, with a high probability. The existence of the vertebra with a minimum HU value of <80 within two levels of upper instrumented vertebrae was a risk factor for adjacent vertebral fracture.

CONCLUSION

HU measurement of the anterior 1/3 of vertebral body predicts the risk of vertebral fracture after short spinal fusion surgery.

Sagittal Section Hounsfield Units of the Upper Instrumented Vertebrae as a Predictor of Proximal Junctional Vertebral Fractures Following Adult Spinal Deformity Surgery

STUDY DESIGN

A retrospective observational study.

PURPOSE

This study aimed to determine an accurate and convenient screening method for predicting proximal junctional fractures (PJFr) following surgery for adult spinal deformity (ASD) using computed tomography (CT)-based measurement of Hounsfield units (HUs).

OVERVIEW OF LITERATURE

CT-based measurement of HUs is an alternative tool for assessing bone mineral density. However, the optimal method for predicting adjacent vertebral fractures following spinal fusion using HUs remains unclear.

METHODS

This retrospective observational study included 42 patients who underwent reconstructive surgery for ASD. Elliptical regions of interest (ROIs) on the axial section and rectangular ROIs on the sagittal section were placed at the upper instrumented vertebrae (UIV), UIV+1, and UIV+2. In addition, the HU value of the L2 vertebra was used as the representative.

RESULTS

PJFr occurred in 28.6% of patients within 2 years following surgery. The HU values obtained from the axial sections of L2, UIV, UIV+1, and UIV+2 were not significantly associated with the incidence of PJFr within 2 years, except for the ROI set in the lower region of the L2 vertebra. However, the HU value of the anterior third of the UIV in the sagittal section was significantly lower in the PJFr group than in the nonPJFr group (87.0 vs. 160.3, p =0.001). A UIV HU value of <100 was associated with a higher incidence of PJFr than an HU vaue of >100 (p <0.05).

CONCLUSIONS

Measurements of HU in the anterior one-third of the UIV in the sagittal section demonstrated predictive ability for PJFr following ASD surgery. A UIV HU value of <100 emerged as a risk factor for PJFr.

Defining the Patient with Lumbar Discogenic Pain: Real-World Implications for Diagnosis and Effective Clinical Management

There is an enormous body of literature that has identified the intervertebral disc as a potent pain generator. However, with regard to lumbar degenerative disc disease, the specific diagnostic criteria lack clarity and fail to capture the primary components which include axial midline low back pain with or without non-radicular/non-sciatic referred leg pain in a sclerotomal distribution. In fact, there is no specific ICD-10-CM diagnostic code to classify and define discogenic pain as a unique source of pain distinct from other recognized sources of chronic low back pain including facetogenic, neurocompressive including herniation and/or stenosis, sacroiliac, vertebrogenic, and psychogenic. All of these other sources have well-defined ICD-10-CM codes. Corresponding codes for discogenic pain remain absent from the diagnostic coding vernacular. The International Society for the Advancement of Spine Surgery (ISASS) has proposed a modernization of ICD-10-CM codes to specifically define pain associated with lumbar and lumbosacral degenerative disc disease. The proposed codes would also allow the pain to be characterized by location: lumbar region only, leg only, or both. Successful implementation of these codes would benefit both physicians and payers in distinguishing, tracking, and improving algorithms and treatments for discogenic pain associated with intervertebral disc degeneration.

Polg mtDNA mutator mice reveal limited involvement of vertebral bone loss in premature aging-related thoracolumbar hyperkyphosis

Background

Age-related hyperkyphosis is multifactorial and involves alterations of vertebral bone, intervertebral discs (IVD) and paraspinal muscles. The relative contribution of these tissues remains unclear. Here, we compared differences in vertebral bone microarchitecture and IVD thickness between prematurely aging mice with spinal hyperkyphosis and wild type littermates.

Methods

Thoracolumbar vertebral columns were dissected from homozygous Polg ^D257A and age-matched wild type littermates. Micro-computed tomography was performed to quantify cortical and trabecular bone parameters at anterior and posterior portions of T8-L4 vertebrae. In addition, vertebral shape, transaxial facet joint orientation and IVD thickness were quantified. Differences in anterior/posterior ratios between genotypes were compared by Student's t-test and association between vertebral bone and IVD parameters was investigated using Pearson correlation analysis.

Results

Hyperkyphotic homozygous mice displayed generalized osteopenia that was more pronounced at the posterior compared with anterior portion of thoracolumbar vertebrae. An increase in the anterior/posterior ratio of trabecular bone parameters was revealed at the thoracolumbar junction (T13-L1). Polg ^D257A displayed diffuse loss of cortical bone thickness, yet anterior/posterior ratios were unchanged. Despite generalized and regional bone loss, vertebral shape was unaffected. PolG ^D257A mice showed a 10-20 % reduction of IVD thickness at both thoracic and lumbar levels, with only minimal histopathological changes. IVD thickness was negatively correlated with anterior/posterior ratios of trabecular bone parameters, as well as with more coronally oriented facet joints, but negatively correlated with the anterior/posterior ratio of cortical bone thickness.

Conclusions

Aging-induced regional changes of vertebral trabecular and cortical bone did not lead to altered vertebral shape in Polg ^D257A mice but may indirectly cause hyperkyphosis through reduction of IVD thickness. These findings suggest a limited role for aging-induced bone loss in spinal hyperkyphosis and warrants further research on the involvement of paraspinal muscle degeneration.

Intervertebral disc degeneration and regeneration: a motion segment perspective

Back and neck pain have become primary reasons for disability and healthcare spending globally. While the causes of back pain are multifactorial, intervertebral disc degeneration is frequently cited as a primary source of pain. The annulus fibrosus (AF) and nucleus pulposus (NP) subcomponents of the disc are common targets for regenerative therapeutics. However, disc degeneration is also associated with degenerative changes to adjacent spinal tissues, and successful regenerative therapies will likely need to consider and address the pathology of adjacent spinal structures beyond solely the disc subcomponents. This review summarises the current state of knowledge in the field regarding associations between back pain, disc degeneration, and degeneration of the cartilaginous and bony endplates, the AF-vertebral body interface, the facet joints and spinal muscles, in addition to a discussion of regenerative strategies for treating pain and degeneration from a whole motion segment perspective.

Pedicle Screws Challenged: Lumbar Cortical Density and Thickness Are Greater in the Posterior Elements Than in the Pedicles

STUDY DESIGN

Controlled laboratory study.

OBJECTIVE

To measure the total bone mineral density (BMD), cortical volume, and cortical thickness in seven different anatomical regions of the lumbar spine.

METHODS

Using computed tomography (CT) images, 3 cadaveric spines were digitally isolated by applying filters for cortical and cancellous bone. Each spine model was separated into 5 lumbar vertebrae, followed by segmentation of each vertebra into 7 anatomical regions of interest using 3-dimensional software modeling. The average Hounsfield units (HU) was determined for each region and converted to BMD with calibration phantoms of known BMD. These BMD measurements were further analyzed by the total volume, cortical volume, and cancellous volume. The cortical thickness was also measured. A similar analysis was performed by vertebral segment. St Mary's Medical Center's Institutional Review Board approved this study. No external funding was received for this work.

RESULTS

The lamina and inferior articular process contained the highest total BMD, thickest cortical shell, and largest percent volumes of cortical bone. The vertebral body demonstrated the lowest BMD. The BMDs of the L4 and L5 segments were lower; however, there were no statistically significant differences in BMD between the L1-L5 vertebral segments.

CONCLUSION

Extrapedicular regions of the lumbar vertebrae, including the lamina and inferior articular process, contain denser bone than the pedicles. Since screw pullout strength relies greatly on bone density, the lamina and inferior articular processes may offer stronger fixation of the lumbar spine.

Sox9 deletion causes severe intervertebral disc degeneration characterized by apoptosis, matrix remodeling, and compartment-specific transcriptomic changes

SOX9 plays an important role in chondrocyte differentiation and, in the developing axial skeleton, maintains the notochord and the demarcation of intervertebral disc compartments. Diminished expression is linked to campomelic dysplasia, resulting in severe scoliosis and progressive disc degeneration. However, the specific functions of SOX9 in the adult spinal column and disc are largely unknown. Accordingly, employing a strategy to conditionally delete Sox9 in Acan-expressing cells (Acan^CreERT2Sox9^fl/fl), we delineated these functions in the adult intervertebral disc. Acan^CreERT2Sox9^fl/fl mice (Sox9^cKO) showed extensive and progressive remodeling of the extracellular matrix in nucleus pulposus (NP) and annulus fibrosus (AF), consistent with human disc degeneration. Progressive degeneration of the cartilaginous endplates (EP) was also evident in Sox9^cKO mice, and it preceded morphological changes seen in the NP and AF compartments. Fate mapping using tdTomato reporter, EdU chase, and quantitative immunohistological studies demonstrated that SOX9 is crucial for disc cell survival and phenotype maintenance. Microarray analysis showed that Sox9 regulated distinct compartment-specific transcriptomic landscapes, with prominent contributions to the ECM, cytoskeleton-related, and metabolic pathways in the NP and ion transport, the cell cycle, and signaling pathways in the AF. In summary, our work provides new insights into disc degeneration in Sox9^cKO mice at the cellular, molecular, and transcriptional levels, underscoring tissue-specific roles of this transcription factor. Our findings may direct future cell therapies targeting SOX9 to mitigate disc degeneration.

Heterogeneity and Spatial Distribution of Intravertebral Trabecular Bone Mineral Density in the Lumbar Spine Is Associated With Prevalent Vertebral Fracture

The spatial heterogeneity in trabecular bone density within the vertebral centrum is associated with vertebral strength and could explain why volumetric bone mineral density (vBMD) exhibits low sensitivity in identifying fracture risk. This study evaluated whether the heterogeneity and spatial distribution of trabecular vBMD are associated with prevalent vertebral fracture. We examined the volumetric quantitative computed tomography (QCT) scans of the L3 vertebra in 148 participants in the Framingham Heart Study Multidetector CT study. Of these individuals, 37 were identified as cases of prevalent fracture, and 111 were controls, matched on sex and age with three controls per case. vBMD was calculated within 5-mm contiguous cubic regions of the centrum. Two measures of heterogeneity were calculated: (i) interquartile range (IQR); and (ii) quartile coefficient of variation (QCV). Ratios in the spatial distributions of the trabecular vBMD were also calculated: anterior/posterior, central/outer, superior/mid-transverse, and inferior/mid-transverse. Heterogeneity and spatial distributions were compared between cases and controls using Wilcoxon rank sum tests and t tests and tested for association with prevalent fractures with conditional logistic regressions independent of integral vBMD. Prevalent fracture cases had lower mean ± SD integral vBMD (134 ± 38 versus165 ± 42 mg/cm3 , p < .001), higher QCV (0.22 ± 0.13 versus 0.17 ± 0.09, p = .003), and lower anterior/posterior rBMD (0.65 ± 0.13 versus 0.78 ± 0.16, p < .001) than controls. QCV was positively associated with increased odds of prevalent fracture (OR 1.61; 95% CI, 1.04 to 2.49; p = .034), but this association was not independent of integral vBMD (p = .598). Increased anterior/posterior trabecular vBMD ratio was associated with decreased odds of prevalent fracture independent of integral vBMD (OR 0.38; 95% CI, 0.20 to 0.71; p = .003). In conclusion, increased trabecular vBMD in the anterior versus posterior centrum, but not trabecular vBMD heterogeneity, was associated with decreased risk of prevalent fracture independent of integral vBMD. Regional measurements of trabecular vBMD could aid in determining the risk and underlying mechanisms of vertebral fracture. © 2019 American Society for Bone and Mineral Research.

Effect of intervertebral disc degeneration on mechanical and electric signals at the interface between disc and vertebra

Intervertebral disc (IVD) degeneration is significantly correlated with the changes in structure and material properties of adjacent vertebral bone, possibly through mechanical and electrical interactions. However, the mechanisms underlying the alteration of the mechanical and electrical environment at the disc-vertebra interface related with disc degeneration have not been well studied. The objective of this study was to numerically investigate the long-term distributions of mechanical and electrical signals on the disc-vertebra interface with disc degeneration. A three-dimensional finite element model of a human lumbar IVD was used to study the mechanical and electric signals at the interface between disc and vertebral body. The disc degeneration was simulated by reducing the nutrition levels on the nucleus pulposus (NP)-vertebra interface and on the annulus fibrosus (AF) periphery to 30% and 60% of its normal values, respectively. In the simulation, the total external mechanical load applied to the disc-vertebra segment was assumed unchanged during disc degeneration. The simulation results showed that the compressive stress of solid matrix changed by up to ~37 kPa on the NP-vertebra interface, while it increased by up to ~32 kPa on the AF-vertebra interface. The shear stress increased by up to ~37 kPa with disc degeneration. The absolute value of the electric potential on the disc-vertebra interface of the disc slightly decreased with the disc degeneration (~0.5 mV). The knowledge of these spatial and temporal variations of the mechanical stresses and electric potential on the disc-vertebra interface is important for understanding the vertebrae adaptation and remodeling during disc degeneration.

Association of vertebral endplate microstructure with bone strength in men and women

Epidemiological and biomechanical evidence indicates that the risk of vertebral fracture differs between men and women, and that vertebral fracture frequently involves failure of the endplate region. The goal of this study was to compare the bone microstructure of the endplate region-defined as the (bony) vertebral endplate and underlying subchondral trabecular bone-between sexes and to determine whether any such sex differences are associated with vertebral strength. The bone density (volume fraction, apparent density and tissue mineral density) of the superior-most 2 mm of the vertebra, and the bone density and trabecular architecture of the next 5 mm were quantified using micro-computed tomography in human T8 (12 female, 16 male) and L1 (13 female, 12 male) vertebrae. Average density of the vertebra (integral bone mineral density (BMD)) was determined by quantitative computed tomography and compressive strength by mechanical testing. Few differences were found between male and female vertebrae in the density of the endplate region; none were found in trabecular architecture. However, whereas endplate volume fraction was positively correlated with integral BMD in male vertebrae (r = 0.654, p < .001), no correlation was found in the female vertebrae (r = 0.157, p = .455). Accounting for the density of the endplate region improved predictions of vertebral strength (p < .034) and eliminated sex-specificity in the strength prediction that was based on integral BMD alone. These results suggest that the density of the endplate region influences vertebral fracture and that non-invasive assessment of this region's density can contribute to predictions of vertebral strength in men and women.

TonEBP-deficiency accelerates intervertebral disc degeneration underscored by matrix remodeling, cytoskeletal rearrangements, and changes in proinflammatory gene expression

The tonicity-responsive enhancer binding protein (TonEBP) plays an important role in intervertebral disc and axial skeleton embryogenesis. However, the contribution of this osmoregulatory transcription factor in postnatal intervertebral disc homeostasis is not known in vivo. Here, we show for the first time that TonEBP-deficient mice have pronounced age-related degeneration of the intervertebral disc with annular and endplate herniations. Using FTIR-imaging spectroscopy, quantitative immunohistochemistry, and tissue-specific transcriptomic analysis, we provide morphological and molecular evidence that the overall phenotype is driven by a replacement of water-binding proteoglycans with fibrocartilaginous matrix. Whereas TonEBP deficiency in the AF compartment caused tissue fibrosis associated with alterations in actin cytoskeleton and adhesion molecules, predominant changes in pro-inflammatory pathways were seen in the NP compartment of mutants, underscoring disc compartment-specific effects. Additionally, TonEBP-deficient mice presented with compromised trabecular bone properties of vertebrae. These results provide the first in vivo support to the long-held hypothesis that TonEBP is crucial for postnatal homeostasis of the spine and controls a multitude of functions in addition to cellular osmoadaptation.

Estrogen Deficiency Exacerbates Intervertebral Disc Degeneration Induced by Spinal Instability in Rats

STUDY DESIGN

An experimental animal study of osteoporosis (OP) and intervertebral disc degeneration (IDD).

OBJECTIVE

The aim of this study was to clarify the effects of estrogen deficiency and supplement on cervical IDD induced by bilateral facetectomy in rats.

SUMMARY OF BACKGROUND DATA

The relationship between IDD and OP is still controversy with the wide prevalence in aged people.

METHODS

Seventy-two Sprague-Dawley female rats were randomly divided into ovariectomy (OVX) group, facet joints resection of C4-6 (FR), FR-OVX group, estrogen replacement therapy (ERT, based on the FR-OVX group) group, and sham group. Specimens of C4-6 segment were harvested at 12 and 24 weeks. The microstructures of C5 vertebrae, vertebral endplate lesions and calcification, and IDD of C5/6 disc were evaluated by micro-computed tomography (micro-CT) and histology. The protein and gene levels of aggrecan, Col2α1, matrix metalloprotease (MMP)-3, and MMP-13 in the C5/6 and C4/5 discs were measured.

RESULTS

Microstructures of C5 vertebral body were weakened significantly after ovariectomy, while restored effectively with estradiol supplementation. The facetectomy led to significant IDD, and the IDD was aggravated when combined with OVX. The IDD of the ERT group was alleviated effectively and similar to that of the FR group in intervertebral disc height, vertebral endplate lesions and calcification, and disc degeneration scores. In addition, the estrogen supplement maintained the extracellular matrix by decreasing MMP-3 and MMP-13, and increasing aggrecan and Col2α1 expression.

CONCLUSION

The present study demonstrated that estrogen deficiency exacerbated IDD induced by spinal instability, while estrogen supplementation alleviated the progression of disc degeneration related to osteoporosis.

LEVEL OF EVIDENCE

N/A.

Disc degeneration promotes regional inhomogeneity in the trabecular morphology of loaded rat tail vertebrae

Background

There is a close relationship between the vertebral trabecular morphology and the condition of the associated disc.

Objective

The relationship between disc degeneration and vertebral trabecular inhomogeneity is unclear. This study aimed to analyse the regional changes of vertebral trabecular morphology after disc degeneration.

Methods

Thirty male Sprague–Dawley rats were randomly assigned to five groups. Group 1 served as an experimental group for the assessment of disc degeneration induced by needle puncture. Group 2 served as a sham group for trabecular morphology analysis. In Group 3, rats had their tail bent between the eighth and tenth coccygeal vertebrae. In Group 4, the tail of rats was bent with a compression load of 4.5 N. In Group 5, rats first underwent disc degeneration induced by a needle puncture before their tail was bent with a compressive load of 4.5 N. Magnetic resonance imaging was performed on all groups, and histological examination was performed on rodents from Group 1. The ninth coccygeal vertebrae of rats from Groups 2–5 were scanned by Micro-computed tomography. Trabecular morphologic changes were assessed in the concave and convex regions by bone volume fraction, trabecular number, trabecular thickness and trabecular separation.

Results

Vertebral trabecular morphology in the concave region improved significantly, whereas the convex region was of significantly lower trabecular morphologic parameters with disc degeneration. The difference in trabecular morphologic parameters between the convex and concave regions increased significantly after disc degeneration.

Conclusion

Disc degeneration promotes regional inhomogeneity in the vertebral trabecular morphology, with the convex region of the vertebrae having the worse trabecular bone morphology than the concave region.

The translational potential of this article

Our study indicates that disc degeneration promotes regional inhomogeneity in the vertebral trabecular morphology. Regional variations in trabecular microarchitecture are helpful to predict vertebral fragility. This may help to elucidate the mechanisms by which disc degeneration contributes to vertebral fracture.

Correspondence between bone mineral density and intervertebral disc degeneration across age and sex

The distribution of bone tissue within the vertebra can modulate vertebral strength independently of average density and may change with age and disc degeneration. Our results show that the age-associated decrease in bone density is spatially non-uniform and associated with disc health, suggesting a mechanistic interplay between disc and vertebra.

PURPOSE

While the decline of bone mineral density (BMD) in the aging spine is well established, the extent to which age influences BMD distribution within the vertebra is less clear. Measures of regional BMD (rBMD) may improve predictions of vertebral strength and suggest how vertebrae might adapt with intervertebral disc degeneration. Thus, we aimed to assess how rBMD values were associated with age, sex, and disc height loss (DHL).

METHODS

We measured rBMD in the L3 vertebra of 377 participants from the Framingham Heart Study (41-83 years, 181 M/196 F). Integral (Int.BMD) and trabecular BMD (Tb.BMD) were measured from QCT images. rBMD ratios (anterior/posterior, superior/mid-transverse, inferior/mid-transverse, and central/outer) were calculated from the centrum. A radiologist assigned a DHL severity score to adjacent intervertebral discs (L2-L3 and L3-L4).

RESULTS

Int.BMD and Tb.BMD were both associated with age, though the decrease across age was greater in women (Int.BMD, - 2.6 mg/cm3 per year; Tb.BMD, - 2.6 mg/cm3 per year) than men (Int.BMD, - 0.5 mg/cm3 per year; Tb.BMD, - 1.2 mg/cm3 per year). The central/outer (- 0.027/decade) and superior/mid-transverse (- 0.018/decade) rBMD ratios were negatively associated with age, with similar trends in men and women. Higher Int.BMD or Tb.BMD was associated with increased odds of DHL after adjusting for age and sex. Low central/outer ratio and high anterior/poster and superior/mid-transverse ratios were also associated with increased odds of DHL.

CONCLUSIONS

Our results indicate that the distribution of bone within the L3 vertebra is different across age, but not between sexes, and is associated with disc degeneration.

Dynamic adaptation of vertebral endplate and trabecular bone following annular injury in a rat model of degenerative disc disease

BACKGROUND CONTEXT

Degenerative disc disease (DDD) is associated with longitudinal remodeling of paravertebral tissues. Although chronic vertebral changes in advanced stages of DDD are well-studied, very little data exists on acute vertebral bone remodeling at the onset and progression of DDD.

PURPOSE

To longitudinally characterize bony remodeling in a rodent model of disc injury-induced DDD.

STUDY DESIGN

In vivo animal study involving a rat annulus fibrosus injury model of DDD.

METHODS

Eight female Lewis rats were assigned to intervertebral disc (IVD) injury (Puncture) or sham surgery (Sham). All rats underwent anterior, transperitoneal approach to the lumbar spine, and Puncture rats underwent annulus fibrosus injury at the L3-L4 and L5-L6 IVDs (n = 8 per group). Live micro computed tomography imaging (10-μm voxel size) was performed 1 week before surgery and postoperatively at 2-week intervals up to a 12-week endpoint. Bone morphology and densitometry of the cranial vertebral body and bony endplate were analyzed and reported with respect to the preoperative baseline scan. Sagittal Safranin-O/Fast-Green and Toluidine Blue histology evaluated using the Rutges IVD score and a custom vertebral endplate score.

RESULTS

Vertebral trabecular tissue mineral density (TMD), vertebral trabecular spacing, endplate TMD, and endplate apparent bone mineral density were all significantly greater in Puncture compared with Sham at 4 weeks and each subsequent timepoint. Puncture rats exhibited marginally lower endplate total volume. Anterior endplate osteophyte formation and central physeal ossification were observed in Puncture rats. Endpoint histological analysis demonstrated moderate evidence of IVD degeneration, indicating that vertebral bone adaptation occurs in the acute phases of DDD onset and progression.

CONCLUSIONS

Annulus injury-induced DDD leads to acute and progressive changes to the morphology and densitometry of bone in the adjacent vertebral bodies and endplates.

Is bone density associated with intervertebral disc pressure in healthy and degenerated discs?

The coupling of the intervertebral disc (IVD) and vertebra as a biomechanical unit suggests that changes in the distribution of pressure within the IVD (intradiscal pressure, IDP) as a result of disc degeneration can influence the distribution of bone density within the vertebra, and vice versa. The goal of this study was to assess the correspondence between IDP and bone density in the adjacent vertebrae, with emphasis on how this correspondence differs between healthy and degenerated IVDs. Bone density of the endplates and subchondral bone in regions adjacent to the anterior and posterior annulus fibrosus (aAF and pAF, respectively) and nucleus pulposus (NP) was measured via quantitative computed tomography (QCT) in 61 spine segments (T7-9, T9-11, T10-12; 71±14years). IDP was measured in the aAF, NP, and pAF regions in 26 of the spine segments (68±16years) while they were tested in flexed (5°) or erect postures. Disc degeneration was assessed by multiple grading schemes. No correlation was found between bone density and IDP in either posture (p>0.104). Regional variations in IDP and, to a greater extent bone density, were found to change with advancing degeneration: both IDP (p=0.045) and bone density (p=0.024) decreased in the NP region relative to the aAF region. The finding of only a modest correspondence between degeneration-associated changes in IDP and bone density may arise from complexity in how IDP relates to mechanical force transmission through the endplate and from limitations of the available IVD grading schemes in estimating the mechanical behavior of the IVD.

Relationship between spinal osteoarthritis and vertebral fractures in men older than 50 years: data from the Camargo Cohort Study

Spinal osteoarthritis has been suggested as a risk factor for vertebral fractures. However, results are conflicting: most of the data are focused on the lumbar region, and referred to postmenopausal women, whereas data for men are scarce. The aim of this study is to assess the relationship between spinal osteoarthritis and vertebral fractures in men over 50 years of age. We conducted a cross-sectional study, nested in a prospective population-based cohort, including 507 community-dwelling men, 93 of them with at least one vertebral fracture. Vertebral fractures, osteophytosis, and disc space narrowing (DSN) were assessed by lateral thoracic and lumbar radiographs. Anthropometric, clinical, and densitometric variables were also analyzed. A multiple logistic regression model was performed. Eighty-five percent of vertebral fractures were located at the thoracic spine. Osteophytosis and DSN showed a bimodal distribution, with major frequency peaks at mid- and distal lumbar spine. The three distributions overlapped around the T9 vertebra. We did not find any relationship between lumbar osteoarthritis and vertebral fractures. Nevertheless, thoracic osteophytosis (OR, 1.84; 95 % CI, 1.05-3.17; p = 0.03) and DSN (OR, 2.52; 95 % CI, 1.43-4.46; p = 0.001) were found to be independently associated with prevalent vertebral fractures, after adjusting for confounders. Our results suggest a positive relationship between radiologic osteoarthritic changes at the thoracic spine and prevalent vertebral fractures in men more than 50 years of age. Osteoarthritis may act as a local risk factor, in addition to other mechanical factors, resulting in a greater propensity to fracture, especially at the mid-thoracic region.

Older men with severe disc degeneration have more incident vertebral fractures-the prospective MINOS cohort study

OBJECTIVE

Data on the relationship between disc degeneration (DD) and fragility fractures in men are limited. The aim of this study was to prospectively analyse the risk of vertebral and non-vertebral fractures in men with thoracolumbar DD according to the severity of its radiological signs: disc space narrowing (DSN), osteophytes and endplate sclerosis.

METHODS

Men >50 years of age (n = 765) had lateral spine radiographs and DXA and were monitored prospectively. We analysed the risk of incident vertebral (7.5 years) and non-vertebral fractures (10 years) in men according to the severity of DD.

RESULTS

After adjustment for age and weight, BMD increased with increasing total DSN score, endplate sclerosis and osteophytosis. Over 7.5 years, 28 incident vertebral fractures occurred in 27 men. After adjustment for age, BMI, spine BMD, prior fractures and abdominal aortic calcifications, the vertebral fracture risk was 3-fold higher in the upper DSN quartile vs men without DSN. After adjustment for the same confounders, vertebral fracture risk was also nearly 3-fold higher in the upper DSN quartile vs the three lower quartiles combined. Over 10 years, 61 men sustained non-vertebral fragility fractures. After adjustment for age, BMI, hip BMD, abdominal aortic calcifications and prior falls and fractures, the non-vertebral fracture risk decreased with increasing DSN score. The risk of non-vertebral fracture was half as high in men above the median total DSN score vs men below the median.

CONCLUSION

In older men, severe DD is associated with higher BMD. Multilevel severe DSN is associated with higher vertebral fracture risk and lower non-vertebral fracture risk.

Bone mechanical properties and changes with osteoporosis

This review will define the role of collagen and within-bone heterogeneity and elaborate the importance of trabecular and cortical architecture with regard to their effect on the mechanical strength of bone. For each of these factors, the changes seen with osteoporosis and ageing will be described and how they can compromise strength and eventually lead to bone fragility.

Quantitative, 3D Visualization of the Initiation and Progression of Vertebral Fractures Under Compression and Anterior Flexion

The biomechanical mechanisms leading to vertebral fractures are not well understood. Clinical and laboratory evidence suggests that the vertebral endplate plays a key role in failure of the vertebra as a whole, but how this role differs for different types of vertebral loading is not known. Mechanical testing of human thoracic spine segments, in conjunction with time-lapsed micro-computed tomography, enabled quantitative assessment of deformations occurring throughout the entire vertebral body under axial compression combined with anterior flexion ("combined loading") and under axial compression only ("compression loading"). The resulting deformation maps indicated that endplate deflection was a principal feature of vertebral failure for both loading modes. Specifically, the onset of endplate deflection was temporally coincident with a pronounced drop in the vertebra's ability to support loads. The location of endplate deflection, and also vertebral strength, were associated with the porosity of the endplate and the microstructure of the underlying trabecular bone. However, the location of endplate deflection and the involvement of the cortex differed between the two types of loading. Under the combined loading, deflection initiated, and remained the largest, at the anterior central endplate or the anterior ring apophysis, depending in part on health of the adjacent intervertebral disc. This deflection was accompanied by outward bulging of the anterior cortex. In contrast, the location of endplate deflection was more varied in compression loading. For both loading types, the earliest progression to a mild fracture according to a quantitative morphometric criterion occurred only after much of the failure process had occurred. The outcomes of this work indicate that for two physiological loading modes, the vertebral endplate and underlying trabecular bone are critically involved in vertebral fracture. These outcomes provide a strong biomechanical rationale for clinical methods, such as algorithm-based qualitative (ABQ) assessment, that diagnose vertebral fracture on the basis of endplate depression. © 2015 American Society for Bone and Mineral Research.

Enhancement of Lumbar Fusion and Alleviation of Adjacent Segment Disc Degeneration by Intermittent PTH(1-34) in Ovariectomized Rats

Osteoporosis, which is prevalent in postmenopausal or aged populations, is thought to be a contributing factor to adjacent segment disc degeneration (ASDD), and the incidence and extent of ASDD may be augmented by osteopenia. Parathyroid hormone (PTH) (1-34) has already been shown to be beneficial in osteoporosis, lumbar fusion and matrix homeostasis of intervertebral discs. However, whether PTH(1-34) has a reversing or retarding effect on ASDD in osteopenia has not been confirmed. In the present study, we evaluated the effects of intermittent PTH(1-34) on ASDD in an ovariectomized (OVX) rat model. One hundred 3-month-old female Sprague-Dawley rats underwent L4 -L5 posterolateral lumbar fusion (PLF) with spinous-process wire fixation 4 weeks after OVX surgery. Control groups were established accordingly. PTH(1-34) was intermittently administered immediately after PLF surgery and lasted for 8 weeks using the following groups (n = 20) (V = vehicle): Sham+V, OVX+V, Sham+PLF+V, OVX+PLF+V, OVX+PLF+PTH. The fused segments showed clear evidence of eliminated motion on the fusion-segment based on manual palpation. Greater new bone formation in histology was observed in PTH-treated animals compared to the control group. The extent of ASDD was significantly increased by ovariotomy. Intermittent PTH(1-34) significantly alleviated ASDD by preserving disc height, microvessel density, relative area of vascular buds, endplate thickness and the relative area of endplate calcification. Moreover, protein expression results showed that PTH(1-34) not only inhibited matrix degradation by decreasing MMP-13, ADAMTS-4 and Col-I, but also promote matrix synthesis by increasing Col-II and Aggrecan. In conclusion, PTH(1-34), which effectively improves lumbar fusion and alleviates ASDD in ovariectomized rats, may be a potential candidate to ameliorate the prognosis of lumbar fusion in osteopenia.

Alendronate Prevents Intervertebral Disc Degeneration Adjacent to a Lumbar Fusion in Ovariectomized Rats

STUDY DESIGN

A model of disc degeneration adjacent to a lumbar fusion in osteoporotic rats.

OBJECTIVE

We determined the effect of alendronate (ALN) on the disc degeneration adjacent to a lumbar fusion in ovariectomized rats.

SUMMARY OF BACKGROUND DATA

Adjacent-segment disc degeneration (ASDD) is one of the negative sequelae of spinal fusion. Previous studies have shown that ALN can alleviate disc degeneration. However, no data have been documented regarding the effect of ALN on ASDD after posterolateral lumbar fusion (PLF) in osteoporosis.

METHODS

50 female Sprague-Dawley rats underwent either a sham operation (sham) (n = 20) or bilateral ovariectomy (OVX) (n = 30). 4 weeks later, all but 10 rats from each group underwent PLF consisting of an intertransverse process spinal fusion using autologous-iliac-bone grafts with spinous-process wire fixation at the L4-L5 segment. Animals were subcutaneously administered vehicle (V) or ALN (70 μg/kg/wk) for 12 weeks post-PLF as follows: Sham+V, OVX+V, PLF+V, OVX+PLF+V, and OVX+PLF+ALN. Fusion status was analyzed by manual palpation and radiography. Adjacent-segment disc was assessed by histological, histomorphometric, immunohistochemical, and mRNA analysis. L6 vertebrae microstructures were evaluated by microcomputed tomography.

RESULTS

The fused segments showed clear evidence of fusion based on manual palpation and radiographs. The OVX+PLF+V group showed more severe degenerative alterations and higher histological scores in the disc than the Sham+V, OVX+V, and PLF+V groups (P < 0.05). Compared with the OVX+PLF+V group, the OVX+PLF+ALN group exhibited significantly improved bone mass and vertebrae microstructures (P < 0.05), an increased disc height, and a decreased endplate calcification area (P < 0.05). ALN also significantly decreased Col-I, MMP-13, and ADAMTS-4 expression and increased Col-II and Aggrecan expression in the disc matrix (P < 0.05).

CONCLUSION

ALN effectively alleviated ASDD post-PLF in ovariectomized rats. These data indicate that ALN can be used as a potential therapeutic agent to attenuate ASDD progression in osteoporosis.

Form and function of the intervertebral disc in health and disease: a morphological and stain comparison study

Multiple histologic measurements are commonly used to assess degenerative changes in intervertebral disc (IVD) structure; however, there is no consensus on which stains offer the clearest visualization of specific areas within the IVD. The objective of this study was to compare multiple tinctorial stains, evaluate their ability to highlight structural features within the IVD, and investigate how they influence the capacity to implement a degeneration scoring system. Lumbar IVDs from seven human autopsy specimens were stained using six commonly used stains (Hematoxylin/Eosin, Toluidine Blue, Safranin-O/Fast Green, Extended FAST, modified Gomori's Trichrome, and Picrosirius Red Alcian Blue). All IVDs were evaluated by three separate graders to independently determine which stains (i) were most effective at discerning different structural features within different regions of the IVDs and (ii) allowed for the most reproducible assessment of degeneration grade, as assessed via the Rutges histological scoring system (Rutges et al. A validated new histological classification for intervertebral disc degeneration. Osteoarthritis Cartilage, 21, 2039-47). Although Trichrome, XFAST and PR/AB stains were all effective at highlighting different regions of whole IVDs, we recommend the use of PR/AB because it had the highest degree of rater agreement on assigned degeneration grade, allowed greater resolution of degeneration grade, has an inferential relationship between color and composition, and allowed clear differentiation of the different regions and structural disruptions within the IVD. The use of a standard set of stains together with a histological grading scheme can aid in the characterization of structural changes in different regions of the IVD and may simplify comparisons across the field. This collection of human IVD histological images highlights how IVD degeneration is not a single disease but a composite of multiple processes such as aging, injury, repair, and disease, each of which are unique to the individual.

Subregional DXA-derived vertebral bone mineral measures are stronger predictors of failure load in specimens with lower areal bone mineral density, compared to those with higher areal bone mineral density

Measurement of areal bone mineral density (aBMD) in intravertebral subregions may increase the diagnostic sensitivity of dual-energy X-ray absorptiometry (DXA)-derived parameters for vertebral fragility. This study investigated whether DXA-derived bone parameters in vertebral subregions were better predictors of vertebral bone strength in specimens with low aBMD, compared to those with higher aBMD. Twenty-five lumbar vertebrae (15 embalmed and 10 fresh-frozen) were scanned with posteroanterior- (PA) and lateral-projection DXA, and then mechanically tested in compression to ultimate failure. Whole-vertebral aBMD and bone mineral content (BMC) were measured from the PA- and lateral-projection scans and within 6 intravertebral subregions. Multivariate regression was used to predict ultimate failure load by BMC, adjusted for vertebral size and specimen fixation status across the whole specimen set, and when subgrouped into specimens with low aBMD and high aBMD. Adjusted BMC explained a substantial proportion of variance in ultimate vertebral load, when measured over the whole vertebral area in lateral projection (adjusted R (2) 0.84) and across the six subregions (ROIs 2-7) (adjusted R (2) range 0.58-0.78). The association between adjusted BMC, either measured subregionally or across the whole vertebral area, and vertebral failure load, was increased for the subgroup of specimens with identified 'low aBMD', compared to those with 'high aBMD', particularly in the anterior subregion where the adjusted R (2) differed by 0.44. The relative contribution of BMC measured in vertebral subregions to ultimate failure load is greater among specimens with lower aBMD, compared to those with higher aBMD, particularly in the anterior subregion of the vertebral body.

Endplate deflection is a defining feature of vertebral fracture and is associated with properties of the underlying trabecular bone

Endplate deflection frequently occurs with vertebral failure, but the relationship between the two remains poorly defined. This study examined associations between endplate deflection under compressive loading and characteristics of the neighboring subchondral bone and intervertebral disc (IVD). Ten L1 vertebrae with adjacent IVDs were dissected, compressed axially in a stepwise manner to failure, and imaged with micro-computed tomography before each loading step. From the images, deflection was measured across the surface of each endplate at each step. Trabecular microstructure and endplate volume fraction were evaluated in 5 mm regions just under the superior endplate. IVDs were assessed using computed tomography and histology. A marked increase in superior endplate deflection coincided with a drop in the load-displacement curve. Endplate deflection was higher in regions with less robust bone microstructure (p < 0.009), though these associations tended to weaken as loading progressed. Immediately following the ultimate point, endplate deflection was higher in regions underlying the nucleus pulposus versus annulus fibrosus (p = 0.035), irrespective of disc grade (p = 0.346). These results indicate that a sudden increase in endplate deflection signals that the mechanical competence of the vertebra has been compromised. The mechanisms of endplate failure likely relate to anatomical features of the endplate, neighboring trabecular bone, and IVD.

The effects of osteoporosis and disc degeneration on vertebral cartilage endplate lesions in rats

PURPOSE

Evidence has shown that osteoporosis or intervertebral disc degeneration (IDD) led to cartilage endplate lesions (CEL), but their combined effects on the lesion remain unknown. This study developed an innovative rat model combined ovariectomy (OVX) and cervical muscle section (CMS), and aimed to evaluate the combined effects of osteoporosis and IDD on cartilage endplate lesions of cervical spine.

METHODS

Fifty-two Sprague-Dawley female rats were assigned randomly into four groups as follows: the sham group (n = 10) underwent sham surgery; the OVX group (n = 14) was subjected to bilateral ovariectomy; the CMS group (n = 14) had posterior paraspinal muscles cut from C2 to C7; the CMS-OVX group (n = 14) underwent the OVX and CMS surgeries consecutively. Samples of C6-C7 segments were harvested at 12, 18 and 24 weeks post-surgery. Micro-CT analysis was performed to evaluate the CEL, intervertebral disc height (IDH) and structural indices. Histological analysis with Safranine O/fast green stain and histological score were used to observe the characteristics of the degenerative discs.

RESULTS

Ovariectomy surgery resulted in significant changes of most structural indices of the C6 body, such as decrease of percent bone volume and number of bone trabecula at 12 weeks, and greater changes at 18 and 24 weeks. The CEL following CMS surgery was seen on the ventral, while the CEL in the OVX and sham groups on the peripheral. The CEL was greatest in the CMS-OVX group and significantly greater than that in the CMS and OVX groups at 12 and 18 weeks (P < 0.05). The CMS surgery resulted in significant IDH decrease at 12, 18 and 24 weeks (P < 0.05), while the OVX surgery resulted in mild IDH decrease when compared with the sham group. The IDH in the CMS-OVX group was significantly lower than that in the CMS group at 24 weeks (P < 0.05). Histological evaluation suggested cartilage endplate abrasion at 12 weeks, and in situ calcification at 18 and 24 weeks in the CMS and CMS-OVX groups. Disc degenerative scores were higher following CMS or OVX surgery, and correlated with the CEL and IDH (P < 0.01), respectively.

CONCLUSIONS

The present study suggested that a combination of OVX and CMS led to more lesion of cartilage endplate than any one thereof, as well as more decrease of IDH. The lesion and IDH decrease were associated with the disc degeneration levels. The cartilage endplate was worn out at the early stage and calcified in situ later. The results indicate that osteoporosis may deteriorate the disc degeneration at specific time.

Aging changes in lumbar discs and vertebrae and their interaction: a 15-year follow-up study

BACKGROUND CONTEXT

Many studies have focused on either the intervertebral disc as a culprit in back pain problems, or the vertebral body, but very few studies have examined both structures and their relationship.

PURPOSE

To measure the concordant changes in morphology of the discs and vertebrae during 5-, 10-, and 15-year follow-ups.

STUDY DESIGN

Longitudinal study.

PATIENT SAMPLE

Among a general population sample of 232 men that had been scanned in 1992-1993, 105 men were reexamined in 1997-1998 and 2007-2008. Mean age at the 15-year follow-up was 63 years. A confirmatory sample with 10 years follow-up was also included.

METHODS

Scanners (1.5 Tesla) with surface coils were used at baseline and follow-up. Image analyzing software was used to measure distances and areas of interest of midsagittal and midaxial spine images.

RESULTS

The disc heights decreased at 5 years by 3.4% (0.4 mm) and 3.3% (0.4 mm) and at 15 years by 8.7% (1.0 mm) and 11.3% (1.3 mm) in the upper and lower discs, respectively (p<.001). Although not clear after 5 years, vertebra heights increased in mean by 3.1% (0.8 mm) in the upper lumbar levels and by 4.7% (1.1 mm) in the lower vertebrae after 15 years (p<.001). Vertebra height increases were associated with disc narrowing (p=.001). The mean annual shortening of the lumbar spine L1-S1 block was 0.13 mm/y, which was in line with the mean standing height that decreased little (174.7 cm at baseline and 174.4 cm at the follow-up).

CONCLUSIONS

Discs and vertebrae degenerate or remodel in concert: decreases in disc height appear to be compensated, in part, by accompanying increases in adjacent vertebra heights. The mechanism behind this novel finding and its implications require further study.

The intravertebral distribution of bone density: correspondence to intervertebral disc health and implications for vertebral strength

This study's goal was to determine associations among the intravertebral heterogeneity in bone density, bone strength, and intervertebral disc (IVD) health. Results indicated that predictions of vertebral strength can benefit from considering the magnitude of the density heterogeneity and the congruence between the spatial distribution of density and IVD health.

INTRODUCTION

This study aims to determine associations among the intravertebral heterogeneity in bone density, bone strength, and IVD health

METHODS

Regional measurements of bone density were performed throughout 30 L1 vertebral bodies using micro-computed tomography (μCT) and quantitative computed tomography (QCT). The magnitude of the intravertebral heterogeneity in density was defined as the interquartile range and quartile coefficient of variation in regional densities. The spatial distribution of density was quantified using ratios of regional densities representing different anatomical zones (e.g., anterior to posterior regional densities). Cluster analysis was used to identify groups of vertebrae with similar spatial distributions of density. Vertebral strength was measured in compression. IVD health was assessed using two scoring systems.

RESULTS

QCT- and μCT-based measures of the magnitude of the intravertebral heterogeneity in density were strongly correlated with each other (p < 0.005). Accounting for the interquartile range in regional densities improved predictions of vertebral strength as compared to predictions based only on mean density (R (2) = 0.59 vs. 0.43; F-test p-value = 0.018). Specifically, after adjustment for mean density, vertebral bodies with greater heterogeneity in density exhibited higher strength. No single spatial distribution of density was associated with high vertebral strength. Analyses of IVD scores suggested that the health of the adjacent IVDs may modulate the effect of a particular spatial distribution of density on vertebral strength.

CONCLUSIONS

Noninvasive measurements of the intravertebral distribution of bone density, in conjunction with assessments of IVD health, can aid in predictions of bone strength and in elucidating biomechanical mechanisms of vertebral fracture.

Biomechanical effects of semi-constrained integrated artificial discs on zygapophysial joints of implanted lumbar segments

This study aimed to optimize the design and application of semi-constrained integrated artificial discs (SIADs) using a finite element (FE) analysis following implantation, wherein the zygapophysial joints of the segment were biomechanically reconstructed. An FE model of the L4-L5 segment was constructed. Variations in the stresses on the discs and zygapophysial joints were observed during 5° anteflexion, 5° extension and 5° rotation under the 400-N applied axial load. Stresses and load translation analyses of the discs and zygapophysial joints were conducted during anteflexion, extension and rotation under the 400-N applied axial load. Following implantation of the lumbar segments, the stresses on the SIAD zygapophysial joints were not significantly different from those of physiological discs during anteflexion, and these were both marginally greater compared with those of non-constrained artificial discs (NADs). During extension, the increase in the stress on the SIAD zygapophysial joints was less than that on NAD zygapophysial joints. Stresses on the NAD zygapophysial joints were higher than those on SIAD and physiological discs during rotation. The stress on the SIAD zygapophysial joints was not significantly different from that on physiological discs during rotation. For SIADs and NADs, the stresses on the zygapophysial joints and the displacements of the discs were greater compared with those of the physiological discs during extension. The SIADs affected the variations in the stresses on the implanted segment more than the NADs, and the SIADs protected the zygapophysial joints of the implanted segment to a higher degree than the NADs.

Regional variations in trabecular architecture of the lumbar vertebra: associations with age, disc degeneration and disc space narrowing

Previous studies suggest that age and disc degeneration are associated with variations in vertebral trabecular architecture. In particular, disc space narrowing, a severe form of disc degeneration, may predispose the anterior portion of a vertebra to fracture. We studied 150 lumbar vertebrae and 209 intervertebral discs from 48 cadaveric lumbar spines of middle-aged men to investigate regional trabecular differences in relation to age, disc degeneration and disc narrowing. The degrees of disc degeneration and narrowing were evaluated using radiography and discography. The vertebrae were dried and scanned on a μCT system. The μCT images of each vertebral body were processed to include only vertebral trabeculae, which were first divided into superior and inferior regions, and further into central and peripheral regions, and then anterior and posterior regions. Structural analyses were performed to obtain trabecular microarchitecture measurements for each vertebral region. On average, the peripheral region had 12-15% greater trabecular bone volume fraction and trabecular thickness than the central region (p<0.01). Greater age was associated with better trabecular structure in the peripheral region relative to the central region. Moderate and severe disc degeneration were associated with higher trabecular thickness in the peripheral region of the vertebral trabeculae (p<0.05). The anterior region was of lower bone quality than the posterior region, which was not associated with age. Slight to moderate narrowing was associated with greater trabecular bone volume fraction in the anterior region of the inferior vertebra (p<0.05). Similarly, greater disc narrowing was associated with higher trabecular thickness in the anterior region (p<0.05). Better architecture of peripheral trabeculae relative to central trabeculae was associated with both age and disc degeneration. In contrast to the previous view that disc narrowing stress-shields the anterior vertebra, disc narrowing tended to associate with better trabecular architecture in the anterior region, as opposed to the posterior region.

The role of the vertebral end plate in low back pain

End plates serve as the interface between rigid vertebral bodies and pliant intervertebral disks. Because the lumbar spine carries significant forces and disks don't have a dedicated blood supply, end plates must balance conflicting requirements of being strong to prevent vertebral fracture and porous to facilitate transport between disk cells and vertebral capillaries. Consequently, end plates are particularly susceptible to damage, which can increase communication between proinflammatory disk constituents and vascularized vertebral bone marrow. Damaged end plate regions can be sites of reactive bone marrow lesions that include proliferating nerves, which are susceptible to chemical sensitization and mechanical stimulation. Although several lines of evidence indicate that innervated end plate damage can be a source of chronic low back pain, its role in patients is likely underappreciated because innervated damage is poorly visualized with diagnostic imaging. This literature review summarizes end plate biophysical function and aspects of pathologic degeneration that can lead to vertebrogenic pain. Areas of future research are identified in the context of unmet clinical needs for patients with chronic low back pain.

Presence of intervertebral discs alters observed stiffness and failure mechanisms in the vertebra

Ex vivo mechanical testing is an essential tool for study of vertebral mechanics. However, the common method of testing vertebral bodies in the absence of adjacent intervertebral discs (IVDs) may limit the physiological relevance of the results. The goal of this study was to determine the influence of IVDs on vertebral mechanical properties and failure mechanisms. Rabbit thoracic vertebral bodies were tested with and without IVDs in a stepwise fashion that incorporated a micro-computed tomography scan at each loading step. The image sequences were analyzed using digital volume correlation to quantify deformations throughout the vertebral body. The observed deformation patterns differed substantially between the groups. Specimens tested with IVDs exhibited a slow increase in strain in the inferior and posterior regions, followed by a sudden increase in strain in the anterior cortex right at the yield point. In contrast, the highest strains in the isolated vertebral bodies were in the posterior regions throughout the test. Specimens tested with IVDs had lower stiffness (507.49±184.73N/mm vs. 845.61±296.09N/mm; p=0.044), higher ultimate displacement (2.00±0.68mm vs. 1.17±0.54mm; p=0.043), and higher maximum shear strains (e.g. top 25th percentile: 0.19±0.11 vs. 0.06±0.07mm/mm; p<0.0458), and tended to have lower ultimate force (690.28±160.25N vs. 873.81±131.48N; p=0.056). Similar work to failure (648.15±317.86N-mm vs. 603.49±437.95 N-mm; p=0.844) was observed between the two groups. These results indicate that testing vertebral bodies in the absence of IVDs can elicit artifactual failure mechanisms. These artifacts may be more prominent than the effects on vertebral strength and toughness.

The effect of intravertebral heterogeneity in microstructure on vertebral strength and failure patterns

The goal of this study was to determine the influence of intravertebral heterogeneity in microstructure on vertebral failure. Results show that noninvasive assessments of the intravertebral heterogeneity in density improve predictions of vertebral strength and that local variations in microstructure are associated with locations of failure in the vertebral body.

INTRODUCTION

The overall goal of this study was to determine the influence of intravertebral heterogeneity in microstructure on vertebral failure.

METHODS

Trabecular density and microarchitecture were quantified for 32 thoracic vertebrae using micro-computed tomography (μCT)-based analyses of 4.81 mm, contiguous cubes throughout the centrum. Intravertebral heterogeneity in density was defined as the interquartile range and quartile coefficient of variation of the cube densities. The vertebrae were compressed to failure to measure stiffness, strength, and toughness. Pre- and post-compression μCT images were analyzed using digital volume correlation to quantify failure patterns in the vertebrae, as defined by the distributions of residual strain.

RESULTS

Failure patterns consisted of large deformations in the midtransverse plane with concomitant endplate biconcavity and were linked to the intravertebral distribution of bone tissue. Low values of connectivity density and trabecular number, and high values of trabecular separation, were associated with high strains. However, local microstructural properties were not the sole determinants of failure. For instance, the midtransverse plane experienced the highest strain (p < 0.008) yet had the highest density, lowest structure model index, and lowest anisotropy (p < 0.013). Accounting for the intravertebral heterogeneity in density improved predictions of strength and stiffness as compared to predictions based only on mean density (strength: R(2) = 0.75 vs. 0.61, p < 0.001; stiffness: R(2) = 0.44 vs. 0.26, p = 0.001).

CONCLUSIONS

Local variations in microstructure are associated with failure patterns in the vertebra. Noninvasive assessments of the intravertebral heterogeneity in density--which are feasible in clinical settings--can improve predictions of vertebral strength and stiffness.

The relationship between concave angle of vertebral endplate and lumbar intervertebral disc degeneration

STUDY DESIGN

A retrospective study of magnetic resonance imaging of the lower lumbar spine.

OBJECTIVE

To describe the characteristics of the concave angle of vertebral endplate (CAVE) and study the association between CAVE and lumbar intervertebral disc degeneration (IVDD).

SUMMARY OF BACKGROUND DATA

The vertebral endplate is responsible for transferring stress between disc and vertebral body, and its concavity is important in dispersing compression stress. However, the characteristics of CAVE and the relationship between CAVE and IVDD have not been investigated.

METHODS

Magnetic resonance images of the lower lumbar spine in 511 patients with low back pain were examined by 2 experienced spine surgeons. The grades of IVDD and lumbar disc herniation (LDH) were evaluated, several parameters including CAVE, height, and the sagittal diameter of vertebral body were measured, and the association between IVDD or LDH and CAVE was analyzed.

RESULTS

At L3-L4, L4-L5, and L5-S1, CAVE was smaller in the upper endplate (i.e., the inferior endplate of the superior vertebra) than in the lower endplate (i.e., the superior endplate of the inferior vertebra). There was no male/female difference in the size of CAVE in any of the segments. According to partial correlation analysis, CAVE was moderately related to IVDD, but no association between CAVE and LDH was found.

CONCLUSION

When lumbar IVDD occurs, the CAVE increases and the endplate tends to flatten. The degree of flattening is related to the severity of the degeneration.

Pullout analysis of a lumbar plate with varying screw orientations: experimental and computational analyses

STUDY DESIGN

Experimental and finite element analysis of anterior lumbar interbody fixation (ALIF) plate pullout.

OBJECTIVE

The objective of this study was to determine the effect of screw angle and orientation on ALIF plate pullout strength.

SUMMARY OF BACKGROUND DATA

It has been thought that angling the screws in an ALIF plate leads to better fixation strength; however, a few studies are published on this question, which produced conflicting results.

METHODS

Using custom guides, screws were configured in 9 different orientations to affix ALIF plates to polyurethane foam blocks. Pullout tests were performed at a rate of 1 mm/min. In addition, finite element analyses were performed on a 2-dimensional screw-block model to gain insight into the internal stress during pullout.

RESULTS

The pullout load was the greatest, with screws positioned 12° outward sagittaly and 6° inward coronally (936 ± 72 N). This orientation was statistically greater than the orientation with the lowest pullout load (812 ± 45 N, P < 0.05); however, no group was statistically different than placing the screws straight in (868 ± 86 N, P > 0.05). Finite elements analysis showed some gain in pullout strength at 12° followed by some loss at greater angles. As the screw insertion angle increased, stress levels elevated within the block even in the regions away from the screw.

CONCLUSION

Significant difference was found between certain screw-angle configurations; however, when compared with simply placing the screws straight in, the difference was never more than 8%. This implies that there is greater freedom in the angle and placement of screws than previously thought. Our results show that there is little change in fixation strength when placing the screw in a different direction.

Vertebral body bone strength: the contribution of individual trabecular element morphology

SUMMARY

Although the amount of bone explains the largest amount of variability in bone strength, there is still a significant proportion unaccounted for. The morphology of individual bone trabeculae explains a further proportion of the variability in bone strength and bone elements that contribute to bone strength depending on the direction of loading.

INTRODUCTION

Micro-CT imaging enables measurement of bone microarchitecture and subsequently mechanical strength of the same sample. It is possible using micro-CT data to perform morphometric analysis on individual rod and plate bone trabeculae using a volumetric spatial decomposition algorithm and hence determine their contribution to bone strength.

METHODS

Twelve pairs of vertebral bodies (T12/L1 or L4/L5) were harvested from human cadavers, and bone cubes (10 × 10 × 10 mm) were obtained. After micro-CT imaging, a volumetric spatial decomposition algorithm was applied, and measures of individual trabecular elements were obtained. Bone strength was measured in compression, where one bone specimen from each vertebral segment was tested supero-inferiorly (SI) and the paired specimen was tested antero-posteriorly (AP).

RESULTS

Bone volume fraction was the strongest individual determinant of SI strength (r(2) = 0.77, p < 0.0001) and AP (r(2) = 0.54, p < 0.0001). The determination of SI strength was improved to r(2) = 0.87 with the addition of mean rod length and relative plate bone volume fraction. The determination of AP strength was improved to r(2) = 0.85 with the addition of mean rod volume and relative rod bone volume fraction.

CONCLUSIONS

Microarchitectural measures of individual trabeculae that contribute to bone strength have been identified. In addition to the contribution of BV/TV, trabecular rod morphology increased the determination of AP strength by 57%, whereas measures of trabecular plate and rod morphology increased determination of SI strength by 13%. Decomposing vertebral body bone architecture into its constituent morphological elements shows that trabecular element morphology has specific functional roles to assist in maintaining skeletal integrity.

Measurement of subregional vertebral bone mineral density in vitro using lateral projection dual-energy X-ray absorptiometry: validation with peripheral quantitative computed tomography

Although a strong relationship exists between areal bone mineral density (aBMD) derived from dual-energy X-ray absorptiometry (DXA) and bone strength, the predictive validity of aBMD for osteoporotic vertebral fractures remains suboptimal. The diagnostic sensitivity of DXA may be improved by assessing aBMD within vertebral subregions, rather than relying on an estimate derived from the total area of the vertebra. The objective of this study was to validate a method of measuring subregional vertebral aBMD in vitro using lateral-projection DXA against subregional volumetric BMD (vBMD) measured with peripheral quantitative computed tomography (pQCT). A mixed set of 49 lumbar and thoracic vertebrae from 25 donors were scanned using lateral-projection DXA and pQCT. aBMD and apparent vBMD were measured in 7 vertebral regions (1 total area and 6 subregions) from the lateral DXA scan. vBMD was calculated in anatomically equivalent regions from pQCT scan data, using a customised software program designed to increase efficiency of the analysis process. Significant differences in densitometric parameters between subregions were observed by DXA and pQCT (P < 0.01). Subregional vBMD derived from pQCT was explained by a significant proportion of the variance in DXA-derived aBMD (R (2) = 0.51-0.67, P < 0.05) and apparent vBMD (R (2) = 0.64-0.75, P < 0.05). These results confirm the validity of measuring aBMD in vertebral subregions using lateral-projection DXA. The clinical significance should now be explored.

Osteoporotic characteristics persist in the spine of ovariectomized sheep after withdrawal of corticosteroid administration

A validated ovine model of osteoporosis achieves severe bone loss in a relatively short period. This study investigated if osteoporotic features persist in this model after cessation of corticosteroid administration. Methods. Osteoporosis was induced in nine ewes by chronic corticosteroid injection, ovariectomy, and low calcium diet. Six ewes were used as controls. Bone mineral density (BMD) of the lumbar spine (LS) and body weight were assessed at regular intervals. After five months, corticosteroid treatment was withdrawn systematically over one month. Three months later, all animals were euthanised, and the LS was collected for histomorphometric analysis. Results. BMD in the LS of osteoporotic sheep was 25% lower than control sheep. Body weight of osteoporotic sheep was reduced in the first month of the corticosteroid withdrawal period but returned to baseline level thereafter. Trabecular bone volume of LS in osteoporotic sheep was 27% lower than controls and showed a heterogeneous structure. Conclusions. Osteoporotic characteristics remain in the vertebra after ceasing corticosteroid administration providing an opportunity to evaluate potential systemic or local treatments in vivo under realistic physiological conditions. The microstructural arrangement of vertebral trabecular bone in sheep is similar to humans demonstrating further relevance of this model for preclinical investigations.

Is greater lumbar vertebral BMD associated with more disk degeneration? A study using µCT and discography

It is well documented that osteoarthritis is associated with greater BMD in peripheral extremities. Yet the relationship between vertebral BMD and disk degeneration (DD) remains controversial in the lumbar spine, which may be due largely to the inadequacies of BMD and DD measures. Aiming to clarify the association between vertebral BMD and adjacent DD, we studied 137 cadaveric lumbar vertebrae and 209 corresponding intervertebral disks from the spines of 48 white men aged 21 to 64 years. DD was evaluated using discography. The vertebrae were scanned using a micro-computed tomography (µCT) system to obtain volumetric BMD for the whole vertebra, the vertebral body, the vertebral body excluding osteophytes, and the vertebral body excluding osteophytes and endplates. A random effects model was used to examine the association between the different definitions of vertebral BMD and adjacent DD. No significant association was found between the BMD of the whole vertebra and adjacent DD. However, when the posterior elements were excluded, there was a significant association between greater vertebral body BMD and more severe degeneration in the disk cranial to the vertebra. This association remained after further excluding osteophytes and endplates from the vertebral body BMD measurements. Also, a trend of greater BMD of the vertebral body associated with more adjacent DD was evident. These results clarify the association between vertebral BMD and DD and specifically indicate that it is higher BMD of the vertebral body, not the entire vertebra, that is associated with more severe adjacent DD. This association may be obscured by the posterior elements and is not confounded by osteophytes and endplate sclerosis.

Pathophysiology and biomechanics of the aging spine

AGING OF THE SPINE IS CHARACTERIZED BY TWO PARALLEL BUT INDEPENDENT PROCESSES: the reduction of bone mineral density and the development of degenerative changes. The combination of degeneration and bone mass reduction contribute, to a different degree, to the development of a variety of lesions. This results in a number of painful and often debilitating disorders. The present review constitutes a synopsis of the pathophysiological processes that take place in the aging spine as well as of the consequences these changes have on the biomechanics of the spine. The authors hope to present a thorough yet brief overview of the process of aging of the human spine.

Can vertebral density changes be explained by intervertebral disc degeneration?

One of the major problems facing the elderly spine is the occurrence of vertebral fractures due to low bone mass. Although typically attributed to osteoporosis, disc degeneration has also been suggested to play a role in vertebral fractures. Existing bone adaptation theories and simulations may explain the biomechanical pathway from a degenerated disc to an increased fracture risk. A finite element model of a lumbar segment was created and calibrated. Subsequently the disc properties were varied to represent either a healthy or degenerated disc and the resulting bone adaptation was simulated. Disc degeneration resulted in a shift of load from the nucleus to the annulus. The resulting bone adaptation led to a dramatically reduced density of the trabecular core and to an increased density in the vertebral walls. Degeneration of just the nucleus, and in particular the dehydration of the nucleus, resulted in most of this bone density change. Additional annulus degeneration had much less of an effect on the density values. The density decrease in the trabecular core as seen in this study matches clinical observations. Therefore, bone remodeling theories can assists in explaining the potential synergistic effects of disc degeneration and osteoporotis in the occurrence of vertebral fractures.

Remodelling of vertebral endplate subchondral bone in scoliosis: a micro-CT analysis in a porcine model

BACKGROUND

Disc degeneration has been correlated with alteration of bone density of adjacent vertebral bodies. Abnormal mechanical loading appears in scoliosis as compared to normal spines. How vertebral endplate was remodelled in scoliosis is not well understood.

METHODS

We conducted a micro-CT analysis of subchondral bone of the vertebral endplate at the curve apex in a porcine scoliosis model. Two adjacent thoracic T(5)-T(6) and lumbar L(1)-L(2) levels were instrumented in six four-week-old pigs with a custom offset implant connected by a flexible stainless steel wire. Two months after implantation, three cylindrical specimens were harvested into the vertebral endplate of each of the scoliosis levels: centre, convexity and concavity, and from the dorsal T(9)-T(10) vertebral units obtained from nine three-month-old non-instrumented pigs used as controls. Micro-CT analysis was carried out on each specimen.

FINDINGS

In the concavity of the scoliotic spine, bone volume fraction, trabecular thickness, and trabecular separation significantly increased whereas in the convexity, only trabecular separation increased. Connectivity index and trabecular number decreased significantly.

INTERPRETATION

This was the first micro-CT study of subchondral bone microarchitecture of the scoliotic vertebral end plate. At the curve apex, increased compression in the concavity induced an osteogenic process. In the convexity, diminished compression caused an osteolytic process with a local resorption. Clinically, the unbalanced tissue remodelling could play a role in the convective and diffusive transports into the end plate, which is of prime importance for the segment homeostasis in scoliosis treatment with or without surgery.

Novel assessment of subregional bone mineral density using DXA and pQCT and subregional microarchitecture using micro-CT in whole human vertebrae: applications, methods, and correspondence between technologies

In the clinical environment dual-energy X-ray absorptiometry (DXA) is the current tool of first choice for assessing and monitoring skeletal integrity. A major drawback of standard DXA is that the bone mineral density (BMD) data cannot be used with certainty to predict who will sustain a vertebral fracture. However, measurement of BMD within vertebral subregions, instead of relying on a gross estimate of vertebral BMD, may improve diagnostic sensitivity. The aim of this article was to describe a validation study for subregional BMD measurement using lateral-projection DXA and to present preliminary data. Concurrent validity of measuring subregional BMD with DXA was established against measures of volumetric subregional BMD from peripheral quantitative computed tomography (pQCT) and subregional bone volume fraction from microCT at the L2 vertebral body in 8 cadaver spine specimens. The novel approaches for measuring subregional parameters with each imaging modality are described. Significant differences in bone parameters between vertebral subregions were observed for each imaging modality (p<0.05). Correspondence ranged from R(2)=0.01-0.79 and R(2)=0.06-0.80 between "DXA vs. pQCT" and "DXA vs. micro-CT," respectively. For both imaging modalities, correspondence with DXA was high for centrally and anteriorly positioned subregions. These data provide a basis for larger studies to examine the biological significance of heterogeneity in vertebral BMD.

Intradiscal electrothermal therapy for symptomatic internal disc disruption: 24-month results and predictors of clinical success

Object

Degeneration of the intervertebral disc can be the source of severe low-back pain. Intradiscal electrothermal therapy (IDET) is a minimally invasive treatment option for patients with symptomatic internal disc disruption unresponsive to conservative medical care. This study was undertaken in the neurosurgical setting to evaluate 24-month pain and functional outcomes and predictors of clinical success in patients with discogenic back pain treated with IDET.

Methods

Using MR imaging and discography findings, 50 patients with lumbar discogenic pain were identified, underwent IDET treatment, and were followed up for 24 months. Outcomes included assessments of back pain severity based on an 11-point numeric scale and back function based on the Oswestry Disability Index. The Prolo scale was applied to determine economic and functional status at 24 months.

Results

There was an average 68 and 66% improvement in back pain and function, respectively, between pretreatment and 24 months after treatment (p < 0.0001 for both comparisons). A maximum score of 5 on the Prolo scale for economic and functional status was achieved in 63 and 22% of patients, respectively. The global clinical success rate was 78% (39 of 50 patients) based on no reoperations at the affected level due to persistent symptoms, with a ≥ 2-point improvement in pain severity and a ≥ 15-point improvement in back function. Predictors of 24-month clinical success included discographic concordance (p < 0.0001), a high-intensity zone on MR imaging (p = 0.0003), low Pfirrmann grade (p = 0.0002), and more extensive anulus coverage (p < 0.0001). There were no procedure-related adverse events.

Conclusions

The findings of this study suggest that durable clinical improvements can be realized after IDET in highly select surgical candidates with mild disc degeneration, confirmatory imaging evidence of anular disruption, and highly concordant pain provocation on low-pressure discography.

Micro-computed tomography evaluation of vertebral end-plate trabecular bone changes in a porcine asymmetric vertebral tether

We conducted a micro-CT analysis of subchondral bone of the vertebral end-plates after application of compressive stress. Thoracic and lumbar vertebral units were instrumented by carrying out left asymmetric tether in eleven 4-week-old pigs. After 3 months of growth, instrumented units and control units were harvested. Micro-CT study of subchondral bone was performed on one central and two lateral specimens (fixated side and non-fixated side). In control units, bone volume fraction (BV/TV), number of trabeculae (Tb.N), trabecular thickness (Tb.Th), and degree of anisotropy (DA) were significantly higher, whereas intertrabecular space (Tb.Sp) was significantly lower in center than in periphery. No significant difference between the fixated and non-fixated sides was found. In instrumented units, BV/TV, Tb.N, Tb.Th, and DA were significantly higher in center than in periphery. BV/TV, Tb.N, and Conn.D were significantly higher in fixated than in non-fixated side, while Tb.Sp was significantly lower. We noted BV/TV, Tb.N, and Tb.Th significantly lower, and Tb.Sp significantly higher, in the instrumented levels. This study showed, in instrumented units, two opposing processes generating a reorganization of the trabecular network. First, an osteolytic process (decrease in BV/TV, Tb.N, Tb.Th) by stress-shielding, greater in center and on non-fixated side. Second, an osteogenic process (higher BV/TV, Tb.N, Conn.D, and lower Tb.Sp) due to the compressive loading induced by growth on the fixated side. This study demonstrates the densification of the trabecular bone tissue of the vertebral end-plates after compressive loading, and illustrates the potential risks of excessively rigid spinal instrumentation which may induce premature osteopenia.

Comparison of trabecular bone behavior in core and whole bone samples using high-resolution modeling of a vertebral body

Computational analysis of trabecular bone normally involves the modeling of (experimental tests of) cored samples. However, the lack of constraint on the sides of the extracted trabecular bone samples limits the information that can be inferred regarding true in situ behavior. Here, the element-by-element voxel-based finite element method was applied via, a custom-written software suite (FEEBE), to a 72 microm resolution model of an ovine vertebra. The difference between the apparent modulus of eight concentric core cylinders when modeled as part of the whole bone (containing 84 x 10(6) degrees of freedom) and independent of the whole bone was investigated. The results showed that cored trabecular bone apparent modulus depended significantly on the core diameter when modeled as an extracted core (r (2) = 0.975) and as part of a whole bone (r (2) = 0.986). The cause of this result was separated into the side-artifact effect and bone volume fraction (BV/TV) effect. For the independently modeled cores, the apparent modulus of an inner core region of interest varied with increasing thickness of the outer annulus. This was attributed to the side-artifact effect, given that the BV/TV of the core region was constant. Within the whole trabecular structure, the side artifact was eliminated as the entire bone structure was modeled. However, a BV/TV effect influenced the apparent modulus depending on the size of the core selected for determining apparent modulus. Changing the size of the core varied the overall BV/TV of the core, and this significantly (r (2) = 0.999) influences the apparent modulus. Therefore, determining a 'true' apparent modulus for trabecular bone was not achievable. The independently modeled cores consistently under-predict the in vivo apparent modulus. It is recommended that if a 'true' apparent modulus is required, the BV/TV at which it is required needs to be first determined. Apparent modeling of entire bones at microscale resolution allowed regions of low and high tissue strains to be identified, consistent with patterns of trabecular bone remodeling and resorption reported in literature. The basivertebral vein cavity underwent the highest strains within the entire vertebral body, suggesting that failure might initiate here, despite containing visibly thicker struts and plate trabeculae. Although computationally expensive, analysis of the entire vertebral body provided a full picture of in situ trabecular bone deformation.