Phase-sensitive optical low-coherence reflectometry for the detection of analyte concentrations

Design of Model Fluids for Flow Characterization Experiments Involving Mixing of Dissimilar Fluids—Refractive Index Matching and Physical Properties

Aqueous solutions of glycerol are widely used as model fluids in flow phenomena experiments. The design of these experiments involves the description of the physical properties of liquids and the refractive index matching using a salt, i.e., calcium chloride. The first part of this paper describes the physical properties of aqueous solutions of glycerol. Refractive index, viscosity, and density were measured for a mass fraction of glycerol in a range from 0 to 1 and compared to the data in the literature. In the second part, calcium chloride was added to aqueous solutions of glycerol, and the variations of density, viscosity, and refractive index with the mass fraction of calcium chloride were reported, which is a new contribution to literature. The main novelties of this work are (1) the development and validation of a set of equations to predict the rheological and physical properties of model fluids for flow studies involving dissimilar fluids; (2) the introduction of an algorithm to match the refractive index of fluids using calcium chloride. The model fluids are designed for large throughput experiments of industrial units, and low-cost solutions were considered. A Matlab script is provided that enables the easy implementation of this method in other works.

Real-Time Interferometric Refractive Index Change Measurement for the Direct Detection of Enzymatic Reactions and the Determination of Enzyme Kinetics

Back scatter interferometry (BSI) is a sensitive method for detecting changes in the bulk refractive index of a solution in a microfluidic system. Here we demonstrate that BSI can be used to directly detect enzymatic reactions and, for the first time, derive kinetic parameters. While many methods in biomedical assays rely on detectable biproducts to produce a signal, direct detection is possible if the substrate or the product exert distinct differences in their specific refractive index so that the total refractive index changes during the enzymatic reaction. In this study, both the conversion of glucose to glucose-6-phosphate, catalyzed by hexokinase, and the conversion of adenosine-triphosphate to adenosine di-phosphate and mono-phosphate, catalyzed by apyrase, were monitored by BSI. When adding hexokinase to glucose solutions containing adenosine-triphosphate, the conversion can be directly followed by BSI, which shows the increasing refractive index and a final plateau corresponding to the particular concentration. From the initial reaction velocities, K_M was found to be 0.33 mM using Michaelis–Menten kinetics. The experiments with apyrase indicate that the refractive index also depends on the presence of various ions that must be taken into account when using this technique. This study clearly demonstrates that measuring changes in the refractive index can be used for the direct determination of substrate concentrations and enzyme kinetics.

Low-coherence interferometry for phase-sensitive measurement of optical rotation

We present phase-sensitive measurement of optical rotation using spectral-domain and time-domain low-coherence interferometry. The method utilizes two decorrelated polarization states and simultaneous dual-channel detection provided by polarization-maintaining fiber-based implementation. The sample is placed between polarization optics to control and switch left- and right-handed circular states that experience the sample in forward and backward directions. Phase difference between two interferometric signals yields the optical rotation. Results from glucose and fructose samples are presented for validation.

Influence of Osmolytes on In Vivo Glucose Monitoring Using Optical Coherence Tomography

Diabetes mellitus and its complications are the third leading cause of death in the world, exceeded only by cardiovascular disease and cancer. Tighter monitoring and control of blood glucose could minimize complications associated with diabetes. Recently, optical coherence tomography (OCT) for noninvasive glucose monitoring was proposed and tested in vivo. The aim of this work was to investigate the influence of changes in blood glucose concentration ([glu]) and sodium concentration ([Na+]) on the OCT signal. We also investigated the influence of other important analytes on the sensitivity of glucose monitoring with OCT. The experiments were carried out in anesthetized female pigs. The OCT images were acquired continuously from skin, while [glu] and [Na+] were experimentally varied within their physiological ranges. Correlations of the OCT signal slope with [glu] and [Na+] were studied at different tissue depths. The tissue area probed with OCT was marked and cut for histological examination. The correlation of blood [glu] and [Na+] with the OCT signal slope was observed in separate tissue layers. On average, equimolar changes in [glu] produced 2.26 ± 1.15 greater alterations of the OCT signal slope than changes in [Na+]. Variation of concentrations of other analytes did not Influence the OCT signal slope. The influence of [Na+] on relative changes in the OCT signal slope was generally less than [glu]-induced changes. OCT is a promising method for noninvasive glucose monitoring because of its ability to track the influence of changing [glu] on individual tissue layers.

Continuous noninvasive monitoring of changes in human skin optical properties during oral intake of different sugars with optical coherence tomography

The objective of this study was to evaluate the effects of blood glucose concentration (BGC) on in vivo human skin optical properties after oral intake of different sugars. In vivo optical properties of human skin were measured with a spectral domain optical coherence tomography (SD-OCT). Experimental results show that increase of BGC causes a decrease in the skin attenuation coefficient. And the maximum decrements in mean attenuation coefficient of skin tissue after drinking glucose, sucrose and fructose solution are 47.0%, 36.4% and 16.5% compared with that after drinking water, respectively (p < 0.05). The results also show that blood glucose levels of the forearm skin tissue are delayed compared with finger-stick blood glucose, and there are significant differences in the time delays after oral intake of different sugars. The time delay between mean attenuation coefficient and BGC after drinking glucose solution is evidently larger than that after drinking sucrose solution, and that after drinking sucrose solution is larger than that after drinking fructose solution. Our pilot studies indicate that OCT technique is capable of non-invasive, real-time, and sensitive monitoring of skin optical properties in human subjects during oral intake of different sugars.

Biosensing using microring resonator interferograms

Optical low-coherence interferometry (OLCI) takes advantage of the variation in refractive index in silicon-wire microring resonator (MRR) effective lengths to perform glucose biosensing using MRR interferograms. The MRR quality factor (Q), proportional to the effective length, could be improved using the silicon-wire propagation loss and coupling ratio from the MRR coupler. Our study showed that multimode interference (MMI) performed well in broad band response, but the splitting ratio drifted to 75/25 due to the stress issue. The glucose sensing sensitivity demonstrated 0.00279 meter per refractive-index-unit (RIU) with a Q factor of ∼30,000 under transverse electric polarization. The 1,310 nm DFB laser was built in the OLCI system as the optical ruler achieving 655 nm characterization accuracy. The lowest sensing limitation was therefore 2 × 10⁻⁴ RIU. Moreover, the MRR effective length from the glucose sensitivity could be utilized to experimentally demonstrate the silicon wire effective refractive index with a width of 0.45 μm and height of 0.26 μm.

Measurement of small molecule diffusion with an optofluidic silicon chip

In this work we explore the micro-ring resonator platform to study the diffusion-driven mass transport of small molecules within microfluidic channels. The micro-ring resonators are integrated on a silicon-on-insulator photonic chip and combined with microfluidics in poly(dimethylsiloxane) (PDMS). We apply a strong initial gradient in the solute concentration and use the micro-ring resonators to observe how this concentration evolves over time and space. This can be achieved by tracking the optical resonances of multiple micro-rings as they shift with changing solute concentration. Experiments are performed for both glucose and NaCl and at different temperatures. The measured concentration profiles are used to calculate the diffusion coefficient of both glucose and NaCl in water. The good agreement between measurement and theoretical prediction demonstrates the relevance of this method.

Dispersion mapping at the micrometer scale using tri-band optical frequency domain imaging

Techniques to differentiate between materials are a powerful addition to the structural information traditionally available from optical coherence tomography images. We present label-free detection of water and lipid at a micrometer scale by evaluating their unique dispersion properties. Using a tri-band swept source configuration, we measure both β(2) and β(3) and show how to identify the two materials at sample thicknesses of 40 and 90 μm, respectively.

Polarization sensitive optical low-coherence reflectometry for blood glucose monitoring in human subjects

A device based on polarization sensitive optical low-coherence reflectometry is developed to monitor blood glucose levels in human subjects. The device was initially tested with tissue phantom. The measurements with human subjects for various glucose concentration levels are found to be linearly dependent on the ellipticity obtainable from the home-made phase-sensitive optical low-coherence reflectometry device. The linearity obtained between glucose concentration and ellipticity are explained with theoretical calculations using Mie theory. A comparison of results with standard clinical methods establishes the utility of the present device for non-invasive glucose monitoring.

High sensitivity phase mapping with parallel Fourier domain optical coherence tomography at 512 000 A-scan/s

In this paper we present an ultra high speed and highly phase sensitive line-field FD-OCT system for quantitative phase mapping. The system works with a maximum speed of 512 000 A-scan/s (1000 fps) in real time mode. Along the parallel recorded direction excellent phase stability corresponding to a path length variation of only 510 pm was measured. We demonstrate how to exploit this phase accuracy for fast chemical analysis of glucose mixture processes. The system has particular potential for studying micro-fluidic processes.

Detection of macrophages in atherosclerotic tissue using magnetic nanoparticles and differential phase optical coherence tomography

We demonstrate the detection of iron oxide nanoparticles taken up by macrophages in atherosclerotic plaque with differential phase optical coherence tomography (DP-OCT). Magneto mechanical detection of nanoparticles is demonstrated in hyperlipidemic Watanabe and balloon-injured fat-fed New Zealand white rabbits injected with monocrystalline iron oxide nanoparticles (MIONs) of < 40 nm diam. MIONs taken up by macrophages was excited by an oscillating magnetic flux density and resulting nanometer tissue surface displacement was detected by DP-OCT. Frequency response of tissue surface displacement in response to an externally applied magnetic flux density was twice the stimulus frequency as expected from the equations of motion for the nanoparticle cluster.

Prediction capability of optical coherence tomography for blood glucose concentration monitoring

BACKGROUND

Optical coherence tomography (OCT) has been shown to be a promising optical approach to noninvasive monitoring of blood glucose concentration because of its capability of probing optical properties at different depths in tissue with high resolution. This article investigates the capability of OCT to predict changes in blood glucose concentration.

METHODS

We varied blood glucose concentration in the physiological range in three sets of experiments. In the first set, we investigated large variations of blood glucose concentration ( approximately 400 mg/dl) and used 2100 OCT A scans for signal averaging. In the second set, we varied blood glucose concentration by approximately 200 mg/dl and used 8400 A scans for signal averaging. In the third set, we improved OCT blood glucose monitoring by increasing and controlling skin temperature under the OCT probe. In this set of experiments we increased the glucose concentration by approximately 300 mg/dl and used 4200 A scans for averaging.

RESULTS

The predicted glucose concentrations in the first two sets were lower than actual glucose concentration by 10-20% (the mean shift), while the heating and temperature control in the third set of experiments reduced the mean shift down to 1.5%. Therefore, the mean shift was reduced substantially by tissue heating and temperature control. However, it did not depend on the number of A scans to be averaged. In contrast, the uncertainty in OCT prediction of glucose concentration (the standard deviation) did not depend on heating and temperature control, but was reduced substantially from 56 to 24 mg/dl by increasing the number of A scans from 2100 to 8400, respectively.

CONCLUSION

These results suggest that the accuracy of OCT-based glucose monitoring is approaching that of standard invasive and minimally invasive techniques.

In vivo study of glucose-induced changes in skin properties assessed with optical coherence tomography

Recently, our in vivo studies demonstrated a strong correlation between blood glucose concentration and the slope of the optical coherence tomography (OCT) signal when the probing beam was scanned over a straight line. To improve the sensitivity of OCT for blood glucose monitoring, two-dimensional (2D) lateral scanning of the OCT probing beam was proposed. Depth-dependent changes in pig skin properties with variation of blood glucose concentration were revealed due to significant suppression of speckle noise and motion artefacts in 2D scanning mode. The correlation coefficient of the OCT signal slope with blood glucose concentration varied periodically in the range from -0.9 to +0.9 depending on depth. The period of variation of the correlation coefficient was 100-150 microm that corresponded to the distance between neighbour collagen bundles. We also observed a decrease of skin thickness by 10 +/- 7.5 microm with an increase of blood glucose concentration by 277 +/- 56 mg dl(-1). Mechanisms of glucose-induced changes in skin properties owing to tissue layer shift caused by dehydration associated with the glucose osmotic effect were considered.

Measurement of optical path length change following pulsed laser irradiation using differential phase optical coherence tomography

Differential phase optical coherence tomography (DPOCT) is introduced to measure optical path length changes in response to pulsed laser irradiation (585 nm). An analytical equation that includes thermoelastic surface displacement and thermorefractive index change is derived to predict optical path length change in response to pulsed laser irradiation for both "confined surface" and "free surface" model systems. The derived equation is tested by comparing predicted values with data recorded from experiments using two model systems. Thermorefractive index change and the thermal expansion coefficient are deduced from differential phase change (dDeltaphi) and temperature increase (DeltaT0) measurements. The measured n(T0)beta(T0)+dndT[=1.7410(-4)+/-1.710(-6) (1K)] in the free surface experiment matches with the National Institute of Standards and Technology (NIST) data value [=1.7710(-4) (1K)]. Exclusion of lateral thermal expansion in the analytical model for the confined surface experiment causes difference between the measured dndT[=-2.310(-4)+/-7.310(-6)(1K)] and the NIST value [=-9.4510(-5) (1K)]. In spite of the difference in the confined surface experiment, results of our studies indicate DPOCT can detect dynamic optical path length change in response to pulsed laser irradiation with high sensitivity, and applications to tissue diagnostics may be possible.

In vitro studies toward noninvasive glucose monitoring with optical coherence tomography

We use optical coherence tomography (OCT) to measure glucose-induced changes in Intralipid and in mouse skin samples in vitro. Mouse skin samples are cultured in a CO2 incubator before measurements are made with different amounts of added glucose concentrations. The results show that the glucose-induced changes in the OCT slope value vary between 20% and 52%/30 mM glucose in different mouse skin samples. This change is much larger than the change in 2% Intralipid (2.1%/30 mM) and in 5% Intralipid (0.86%/30 mM). Hence the results show that OCT has potential to monitor glucose-induced changes in tissues in vitro.

Noninvasive glucose sensing

The ability to measure glucose noninvasively in human subjects is a major objective for many research groups. Success will revolutionize the treatment of diabetes by providing a means to improve glycemic control, thereby delaying the onset of the medical complications associated with this disease. This article focuses on the current state of the art and attempts to identify the principal areas of research necessary to advance the field. Two fundamentally different approaches are identified for the development of noninvasive glucose sensing technology. The indirect approach attempts to measure glucose on the basis of its effect on a secondary process. The direct approach is based on the unique chemical structure of the glucose molecule. Advances for each approach are limited by issues of selectivity. Several critical parameters are discussed for the direct approach, including issues related to the optical path length, wavelength range, dimensionality of the multivariate calibration model, net analyte signal, spectral variance, and assessment of the chemical basis of measurement selectivity. A set of publication standards is recommended as a means to enhance progress toward a successful noninvasive monitor.