Two-dimensional biosensor arrays based on surface plasmon resonance phase imaging

Recent advances in surface plasmon resonance imaging and biological applications

Surface Plasmon Resonance Imaging (SPRI) is a robust technique for visualizing refractive index changes, which enables researchers to observe interactions between nanoscale objects in an imaging manner. In the past period, scholars have been attracted by the Prism-Coupled and Non-prism Coupled configurations of SPRI and have published numerous experimental results. This review describes the principle of SPRI and discusses recent developments in Prism-Coupled and Non-prism Coupled SPRI techniques in detail, respectively. And then, major advances in biological applications of SPRI are reviewed, including four sub-fields (cells, viruses, bacteria, exosomes, and biomolecules). The purpose is to briefly summarize the recent advances of SPRI and provide an outlook on the development of SPRI in various fields.

Circulating microRNA breast cancer biomarker detection in patient sera with surface plasmon resonance imaging biosensor

In this article, we report for the first time, the detection of circulating miRNA as a breast cancer biomarker in patient sera using surface plasmon resonance imaging biosensor. The advantage of this approach lies in the rapid, label-free and sensitive detection. The sensor excites plasmonic resonance on the gold sensor surface and specific DNA-miRNA molecular bindings elucidate responses in the plasmonic resonance image. Experiments of detecting synthetic miRNA molecules (miR-1249) were performed and the sensor resolution was found to be 63.5 nM. The sensor was further applied to screen 17 patient serum samples from National Cancer Centre Singapore and Tan Tock Seng Hospital. Sensor intensity response was found to differ by 20% between malignant and benign cases and thus forms, a potential and an important metric in distinguishing benignity and malignancy.

A multiplex and regenerable surface plasmon resonance (MR-SPR) biosensor for DNA detection of genetically modified organisms

The continuous advancement of analytical technology has provided methods with increasing sensitivity and precision to detect genetically modified organisms (GMOs). Novel analytical strategy-based detection methods are alternatives to conventional polymerase chain reaction (PCR)-mediated assays, which are still the gold standard in this field. However, PCR primers and probes cannot be reused, which makes the technique uneconomical. Surface plasmon resonance (SPR) is an optical and label-free technique for studying ligand-analyte interactions, especially for DNA hybridization, and several SPR biosensors have been described for the detection of nucleic acids. Here, a multiplexed, regenerable and real-time SPR biosensor for the detection of GMOs is described. A biosensor was constructed for qualitative detection of T-nos, CaMV35S and cry1A and had good specificity and sensitivity. The limit of detection (LOD) of this biosensor was 0.1 nM without any signal amplification. Furthermore, our biosensor could be stably regenerated more than 100 times over at least 20 days and showed good reproducibility. This nucleic acid SPR biosensor has potential for application in other types of biological detection.

Optical Biosensors for Virus Detection: Prospects for SARS-CoV-2/COVID-19

The recent pandemic of the novel coronavirus disease 2019 (COVID-19) has caused huge worldwide disruption due to the lack of available testing locations and equipment. The use of optical techniques for viral detection has flourished in the past 15 years, providing more reliable, inexpensive, and accurate detection methods. In the current minireview, optical phenomena including fluorescence, surface plasmons, surface-enhanced Raman scattering (SERS), and colorimetry are discussed in the context of detecting virus pathogens. The sensitivity of a viral detection method can be dramatically improved by using materials that exhibit surface plasmons or SERS, but often this requires advanced instrumentation for detection. Although fluorescence and colorimetry lack high sensitivity, they show promise as point-of-care diagnostics because of their relatively less complicated instrumentation, ease of use, lower costs, and the fact that they do not require nucleic acid amplification. The advantages and disadvantages of each optical detection method are presented, and prospects for applying optical biosensors in COVID-19 detection are discussed.

Recent Advances in Surface Plasmon Resonance Imaging Sensors

The surface plasmon resonance (SPR) sensor is an important tool widely used for studying binding kinetics between biomolecular species. The SPR approach offers unique advantages in light of its real-time and label-free sensing capabilities. Until now, nearly all established SPR instrumentation schemes are based on single- or several-channel configurations. With the emergence of drug screening and investigation of biomolecular interactions on a massive scale these days for finding more effective treatments of diseases, there is a growing demand for the development of high-throughput 2-D SPR sensor arrays based on imaging. The so-called SPR imaging (SPRi) approach has been explored intensively in recent years. This review aims to provide an up-to-date and concise summary of recent advances in SPRi. The specific focuses are on practical instrumentation designs and their respective biosensing applications in relation to molecular sensing, healthcare testing, and environmental screening.

Spectral Imaging Analysis for Ultrasensitive Biomolecular Detection Using Gold-Capped Nanowire Arrays

A spectral integration combined with a threshold method for the analysis of spectral scanning surface plasmon resonance (SPR) images can significantly increase signal recognition at low concentration of antibody solution. The 12-well SPR sensing plates consisted of gold-capped nanowire arrays with 500-nm period, 80-nm linewidth and 50-nm gold thickness which were used for generating multiple SPR images. A threshold method is introduced to eliminate background noises in spectral scanning images. Combining spectral integration and the threshold method, the detection limit of antibody concentration was 1.23 ng/mL. Using multiple-well SPR sensing plates and the proposed analytical method, multiple kinetic responses with spectral and spatial information on different sensing areas can be sensitively measured.

Wavelength-multiplexing surface plasmon holographic microscopy

Surface plasmon holographic microscopy (SPHM), which combines surface plasmon microscopy with digital holographic microscopy, can be applied for amplitude- and phase-contrast surface plasmon resonance (SPR) imaging. In this paper, we propose an improved SPHM with the wavelength multiplexing technique based on two laser sources and a common-path hologram recording configuration. Through recording and reconstructing the SPR images at two wavelengths simultaneously employing the improved SPHM, tiny variation of dielectric refractive index in near field is quantitatively monitored with an extended measurement range while maintaining the high sensitivity. Moreover, imaging onion tissues is performed to demonstrate that the detection sensitivities of two wavelengths can compensate for each other in SPR imaging. The proposed wavelength-multiplexing SPHM presents simple structure, high temporal stability and inherent capability of phase curvature compensation, as well as shows great potentials for further applications in monitoring diverse dynamic processes related with refractive index variations and imaging biological tissues with low-contrast refractive index distributions in the near field.

Phase-Sensitive Surface Plasmon Resonance Sensors: Recent Progress and Future Prospects

Surface plasmon resonance (SPR) is an optical sensing technique that is capable of performing real-time, label-free and high-sensitivity monitoring of molecular interactions. SPR biosensors can be divided according to their operating principles into angle-, wavelength-, intensity- and phase-interrogated devices. With their complex optical configurations, phase-interrogated SPR sensors generally provide higher sensitivity and throughput, and have thus recently emerged as prominent biosensing devices. To date, several methods have been developed for SPR phase interrogation, including heterodyne detection, polarimetry, shear interferometry, spatial phase modulation interferometry and temporal phase modulation interferometry. This paper summarizes the fundamentals of phase-sensitive SPR sensing, reviews the available methods for phase interrogation of these sensors, and discusses the future prospects for and trends in the development of this technology.

A Phase-Intensity Surface Plasmon Resonance Biosensor for Avian Influenza A (H5N1) Detection

In this paper, we present a phase-intensity surface plasmon resonance (SPR) biosensor and demonstrate its use for avian influenza A (H5N1) antibody biomarker detection. The sensor probes the intensity variation produced by the steep phase response at surface plasmon excitation. The prism sensor head is fixed between a pair of polarizers with a perpendicular orientation angle and a forbidden transmission path. At SPR, a steep phase change is introduced between the p- and s-polarized light, and this rotates the polarization ellipse of the transmission beam. This allows the light at resonance to be transmitted and a corresponding intensity change to be detected. Neither time-consuming interference fringe analysis nor a phase extraction process is required. In refractive index sensing experiments, the sensor resolution was determined to be 6.3 × 10^-6 refractive index values (RIU). The sensor has been further applied for H5N1 antibody biomarker detection, and the sensor resolution was determined to be 193.3 ng mL^-1, compared to 1 μg mL^-1 and 0.5 μg mL^-1, as reported in literature for influenza antibody detection using commercial Biacore systems. It represents a 517.3% and 258.7% improvement in detection limit, respectively. With the unique features of label-free, real-time, and sensitive detection, the phase-intensity SPR biosensor has promising potential applications in influenza detection.

MicroRNA Biosensing with Two-Dimensional Surface Plasmon Resonance Imaging

Two-dimensional surface plasmon resonance (2D-SPR) imaging, which provides a real-time, sensitive, and high-throughput analysis of surface events in a two dimensional manner, is a valuable tool for studying biomolecular interactions and biochemical reactions without using any tag labels. The sensing principle of 2D-SPR includes angular, wavelength, and phase interrogation. In this chapter, the 2D-SPR imaging technique is applied for sensing a target microRNA by its corresponding oligonucleotide probes, with sequence complementarity, immobilized on the gold SPR sensing surface. However, the low SPR signal due to intrinsic properties such as low molecular weight and quantity (pico-nanomolar) of the microRNA in clinical samples limits the direct detection of microRNA. Therefore, we developed a biosensing technique known as MARS (MicroRNA-RNase-SPR) assay, which utilizes RNase H to digest the microRNA probes enzymatically for fast signal amplification, i.e., in order to increase both the SPR signal and readout speed without the need for pre-amplification of target cDNA by polymerase chain reaction (PCR). Practically, we targeted microRNA hsa-miR-29a-3p, whose signature correlates to influenza infection, for rapid screening of influenza A (H1N1) patients from throat swab samples.

High-throughput imaging surface plasmon resonance biosensing based on an adaptive spectral-dip tracking scheme

Imaging-based spectral surface plasmon resonance (λSPR) biosensing is predominantly limited by data throughput because of the multiplied data capacity emerging from 2-dimensional sensor array sites and the many data points required to produce an accurate measurement of the absorption dip. Here we present an adaptive feedback approach to address the data throughput issue in λSPR biosensing. A feedback loop constantly tracks the dip location while target-molecule binding occurs at the sensor surface. An adaptive window is then imposed to reduce the number of data points that each pixel has to capture without compromising measurement accuracy. Rapid wavelength scanning is performed with a liquid crystal tunable filter (LCTF). With the use of a feedback loop, our demonstration system can produce a dip measurement within 700ms, thus confirming that the reported λSPR approach is most suitable for real-time micro-array label-free biosensing applications.

Allergen screening bioassays: recent developments in lab-on-a-chip and lab-on-a-disc systems

Allergies occur when a person's immune system mounts an abnormal response with or without IgE to a normally harmless substance called an allergen. The standard skin-prick test introduces suspected allergens into the skin with lancets in order to trigger allergic reactions. This test is annoying and sometimes life threatening. New tools such as lab-on-a-chip and lab-on-a-disc, which rely on microfabrication, are designed for allergy testing. These systems provide benefits such as short analysis times, enhanced sensitivity, simplified procedures, minimal consumption of sample and reagents and low cost. This article gives a summary of these systems. In particular, a cell-based assay detecting both the IgE- and non-IgE-type triggers through the study of degranulation in a centrifugal microfluidic system is highlighted.

Non-labeling multiplex surface enhanced Raman scattering (SERS) detection of volatile organic compounds (VOCs)

In this paper, we report multiplex SERS based VOCs detection with a leaning nano-pillar substrate. The VOCs analyte molecules adsorbed at the tips of the nano-pillars produced SERS signal due to the field enhancement occurring at the localized surface plasmon hot spots between adjacent leaning nano-pillars. In this experiment, detections of acetone and ethanol vapor at different concentrations were demonstrated. The detection limits were found to be 0.0017 ng and 0.0037 ng for ethanol and acetone vapor molecules respectively. Our approach is a non-labeling method such that it does not require the incorporation of any chemical sensing layer for the enrichment of gas molecules on sensor surface. The leaning nano-pillar substrate also showed highly reproducible SERS signal in cyclic VOCs detection, which can reduce the detection cost in practical applications. Further, multiplex SERS detection on different combination of acetone and ethanol vapor was also successfully demonstrated. The vibrational fingerprints of molecular structures provide specific Raman peaks for different VOCs contents. To the best of our knowledge, this is the first multiplex VOCs detection using SERS. We believe that this work may lead to a portable device for multiplex, specific and highly sensitive detection of complex VOCs samples that can find potential applications in exhaled breath analysis, hazardous gas analysis, homeland security and environmental monitoring.

Wavelength-multiplexing phase-sensitive surface plasmon imaging sensor

A wavelength-multiplexing phase-sensitive surface plasmon resonance (SPR) imaging sensor offering wide dynamic detection range and microarray capability is reported. Phase detection is accomplished by performing self-interference between the s- and p- polarizations within the signal beam. A liquid crystal tunable filter is used to sequentially select the SPR excitation wavelength from a white light source. This wavelength-multiplexing approach enables fast detection of the sensor's SPR phase response over a wide range of wavelengths, thereby covering literally any regions of interest within the SPR dip and thus maintaining the highest sensitivity point at all times. The phase-sensitive approach is particularly important for imaging SPR sensing applications because of its less stringent requirements for intensity signal-to-noise ratio, which also means the possibility of using uncooled modest resolution analog-to-digital conversion imaging devices. Experimental results demonstrate a resolution of 2.7×10(-7) RIU with a dynamic range of 0.0138 RIU.

Surface plasmon resonance sensing of nucleic acids: a review

Biosensors based on surface plasmon resonance (SPR) have become a central tool for the investigation and quantification of biomolecules and their interactions. Nucleic acids (NAs) play a vital role in numerous biological processes and therefore have been one of the major groups of biomolecules targeted by the SPR biosensors. This paper discusses the advances of NA SPR biosensor technology and reviews its applications both in the research of molecular interactions involving NAs (NA-NA, NA-protein, NA-small molecule), as well as for the field of bioanalytics in the areas of food safety, medical diagnosis and environmental monitoring.

Detecting Phase Shifts in Surface Plasmon Resonance: A Review

Under certain conditions, a surface plasmon wave along a metal-dielectric interface can be excited by an optical beam. The reflected optical beam will then undergo changes in both intensity and phase. As the level of intensity or phase change is quite sensitive to the coupling conditions such as the molecule concentration on the metal surface, this phenomenon has been utilized for label-free detection of biological species and characterization of molecular interactions during the last two decades. Currently, most of the commercial surface plasmon resonance (SPR) sensors rely on the detection of absorption dip in angular or wavelength spectrum. However, recent researches have shown that phase detection has the potential to achieve lower limit of detection (LoD) and higher throughput. This paper, thus, intends to review various schemes and configurations for SPR phase detection. The performance advantages and disadvantages of various schemes will be emphasized. It is hoped that this paper will provide some insights to researchers interested in SPR sensing and help them to develop SPR sensors with better sensitivity and higher throughput.

Surface plasmon resonance based biosensor technique: a review

Optical Surface plasmon resonance (SPR) biosensors represent the most advanced and developed optical label-free biosensor technology. Optical SPR biosensors are a powerful detection and analysis tool that has vast applications in environmental protection, biotechnology, medical diagnostics, drug screening, food safety and security. This article reviews the recent development of SPR biosensor techniques, including bulk SPR and localized SPR (LSPR) biosensors, for detecting interactions between an analyte of interest in solution and a biomolecular recognition. The concepts of bulk and localized SPs and the working principles of both sensing techniques are introduced. Major sensing advances on biorecognition elements, measurement formats, and sensing platforms are presented. Finally, the discussions on both biosensor techniques as well as comparison of both SPR sensing techniques are made.

Multiplex spectral surface plasmon resonance imaging (SPRI) sensor based on the polarization control scheme

A two-dimensional (2D) spectral SPR sensor based on a polarization control scheme is reported in this paper. The polarization control configuration converts the phase difference between p- and s- polarization occurring at surface plasmon resonance (SPR) into corresponding color responses in spectral SPR images. A sensor resolution of 2.7 x 10(-6) RIU has been demonstrated, which corresponds to more than one order of magnitude resolution improvement (26 times) comparing to existing 2D spectral SPR sensors. Multiplex array detection has also been demonstrated with the spectral SPR imaging sensor. In a 8 x 4 sensor array, 32 samples with different refractive index values were monitored simultaneously. Detection on bovine serum albumin (BSA) antigen-antibody binding further demonstrated the multiplex detection capability of the 2D spectral SPR sensor for bio-molecular interactions. The detection limit is found to be 21 ng/ml, which is 36 times better than the detection limit previously reported by phase imaging SPR sensors. In light of the advantages of high sensitivity, 2D multiplex detection and real-time response, the spectral SPR imaging sensor can find promising applications in rapid, high throughput, non-labeling and multiplex detection of protein array for proteomics studies, biomarker screening, disease prognosis, and drug discovery.

Investigation on an application of silver substrates for sensitive surface plasmon resonance imaging detection

A surface plasmon resonance (SPR) imaging biosensor based on silver substrates was investigated to demonstrate that silver could be used as a substrate material for sensitive detection of biomolecular interactions, despite its poor chemical stability. The calculation results showed that oxidation of silver film may lead to a decrease in the sensitivity due to a variation in SPR characteristics such as a broader curve width and shallower minimum reflectance at resonance. The effect of a change in the refractive index of target analytes on the sensitivity was also explored. In particular, it is noteworthy that Ag/Au bimetallic substrates with a thin gold protection layer to prevent oxidation of a silver film can provide a significant amplification of SPR imaging signals in comparison with conventional gold substrates.

Phase and amplitude sensitivities in surface plasmon resonance bio and chemical sensing

We consider amplitude and phase characteristics of light reflected under the Surface Plasmon Resonance (SPR) conditions and study their sensitivities to refractive index changes associated with biological and chemical sensing. Our analysis shows that phase can provide at least two orders of magnitude better detection limit due to the following reasons: (i) Maximal phase changes occur in the very dip of the SPR curve where the vector of probing electric field is maximal, whereas maximal amplitude changes are observed on the resonance slopes: this provides a one order of magnitude larger sensitivity of phase to refractive index variations; (ii) Under a proper design of a detection scheme, phase noises can be orders of magnitude lower compared to amplitude ones, which results in a much better signal-to-noise ratio; (iii) Phase offers much better possibilities for signal averaging and filtering, as well as for image treatment. Applying a phase-sensitive SPR polarimetry scheme and using gas calibration model, we experimentally demonstrate the detection limit of 10(-8) RIU, which is about two orders of magnitude better compared to amplitude-sensitive schemes. Finally, we show how phase can be employed for filtering and treatment of images in order to improve signal-to-noise ratio even in relatively noisy detection schemes. Combining a much better physical sensitivity and a possibility of imaging and sensing in micro-arrays, phase-sensitive methodologies promise a substantial upgrade of currently available SPR technology.