1
|
Tonti L, García Daza FA, Romero-Enrique JM, Patti A. Structural and dynamical equilibrium properties of hard board-like particles in parallel confinement. J Chem Phys 2024; 160:124903. [PMID: 38533886 DOI: 10.1063/5.0193126] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2023] [Accepted: 03/10/2024] [Indexed: 03/28/2024] Open
Abstract
We performed Monte Carlo and dynamic Monte Carlo simulations to model the diffusion of monodispersed suspensions composed of impenetrable cuboidal particles, specifically hard board-like particles (HBPs), in the presence of parallel hard walls. The impact of the walls was investigated by adjusting the size of the simulation box while maintaining constant packing fractions, fixed at η = 0.150, for systems consisting of HBPs with prolate, dual-shaped, and oblate geometries. We observed that increasing the distance between the walls led to the recovery of an isotropic bulk phase, while local particle organization near the walls remained stable. Due to their shape, oblate HBPs exhibit more efficient anchoring at wall surfaces compared to prolate shapes. The formation of nematic-like particle assemblies near the walls, confirmed by theoretical calculations based on density functional theory, significantly influenced local particle dynamics. This effect was particularly pronounced to the extent that a modest portion of cuboids near the walls tended to diffuse exclusively in planes parallel to the confinement, even more efficiently than observed in the bulk regions.
Collapse
Affiliation(s)
- Luca Tonti
- Department of Chemical Engineering, The University of Manchester, Manchester M13 9PL, United Kingdom
| | - Fabián A García Daza
- Department of Physical, Chemical and Natural Systems, Pablo de Olavide University, 41013 Sevilla, Spain
| | - José Manuel Romero-Enrique
- Departamento de Física Atómica, Molecular y Nuclear, Área de Física Teórica, Universidad de Sevilla, Avenida de Reina Mercedes s/n, 41012 Sevilla, Spain
- Carlos I Institute of Theoretical and Computational Physics, Fuente Nueva s/n, 18071 Granada, Spain
| | - Alessandro Patti
- Department of Chemical Engineering, The University of Manchester, Manchester M13 9PL, United Kingdom
- Carlos I Institute of Theoretical and Computational Physics, Fuente Nueva s/n, 18071 Granada, Spain
- Department of Applied Physics, University of Granada, Fuente Nueva s/n, 18071 Granada, Spain
| |
Collapse
|
2
|
Shiraz M, Imtiaz H, Azam A, Hayat S. Phytogenic nanoparticles: synthesis, characterization, and their roles in physiology and biochemistry of plants. Biometals 2024; 37:23-70. [PMID: 37914858 DOI: 10.1007/s10534-023-00542-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/14/2023] [Accepted: 09/15/2023] [Indexed: 11/03/2023]
Abstract
Researchers are swarming to nanotechnology because of its potentially game-changing applications in medicine, pharmaceuticals, and agriculture. This fast-growing, cutting-edge technology is trying different approaches for synthesizing nanoparticles of specific sizes and shapes. Nanoparticles (NPs) have been successfully synthesized using physical and chemical processes; there is an urgent demand to establish environmentally acceptable and sustainable ways for their synthesis. The green approach of nanoparticle synthesis has emerged as a simple, economical, sustainable, and eco-friendly method. In particular, phytoassisted plant extract synthesis is easy, reliable, and expeditious. Diverse phytochemicals present in the extract of various plant organs such as root, leaf, and flower are used as a source of reducing as well as stabilizing agents during production. Green synthesis is based on principles like prevention/minimization of waste, reduction of derivatives/pollution, and the use of safer (or non-toxic) solvent/auxiliaries as well as renewable feedstock. Being free of harsh operating conditions (high temperature and pressure), hazardous chemicals and the addition of external stabilizing or capping agents makes the nanoparticles produced using green synthesis methods particularly desirable. Different metallic nanomaterials are produced using phytoassisted synthesis methods, such as silver, zinc, gold, copper, titanium, magnesium, and silicon. Due to significant differences in physical and chemical properties between nanoparticles and their micro/macro counterparts, their characterization becomes essential. Various microscopic and spectroscopic techniques have been employed for conformational details of nanoparticles, like shape, size, dispersity, homogeneity, surface structure, and inter-particle interactions. UV-visible spectroscopy is used to examine the optical properties of NPs in solution. XRD analysis confirms the purity and phase of NPs and provides information about crystal size and symmetry. AFM, SEM, and TEM are employed for analyzing the morphological structure and particle size of NPs. The nature and kind of functional groups or bioactive compounds that might account for the reduction and stabilization of NPs are detected by FTIR analysis. The elemental composition of synthesized NPs is determined using EDS analysis. Nanoparticles synthesized by green methods have broad applications and serve as antibacterial and antifungal agents. Various metal and metal oxide NPs such as Silver (Ag), copper (Cu), gold (Au), silicon dioxide (SiO2), zinc oxide (ZnO), titanium dioxide (TiO2), copper oxide (CuO), etc. have been proven to have a positive effect on plant growth and development. They play a potentially important role in the germination of seeds, plant growth, flowering, photosynthesis, and plant yield. The present review highlights the pathways of phytosynthesis of nanoparticles, various techniques used for their characterization, and their possible roles in the physiology of plants.
Collapse
Affiliation(s)
- Mohammad Shiraz
- Department of Botany, Aligarh Muslim University, Aligarh, 202002, India
| | - Havza Imtiaz
- Department of Botany, Aligarh Muslim University, Aligarh, 202002, India
| | - Ameer Azam
- Department of Physics, Faculty of Science Islamic Universityof Madinah Al Jamiah, Madinah, 42351, Saudi Arabia
| | - Shamsul Hayat
- Department of Botany, Aligarh Muslim University, Aligarh, 202002, India.
| |
Collapse
|
3
|
Saraswat M, Sengwa R. Optical, rheological, dielectric, and electrical properties of multiple oxides nanosuspended glycerol based semiconductor hybrid nanofluids. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2022.120671] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
4
|
Sun L, Yang L, Zhao N, Song J, Li X, Wu X. A review of multifunctional applications of nanofluids in solar energy. POWDER TECHNOL 2022. [DOI: 10.1016/j.powtec.2022.117932] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
5
|
Huang G, Curt SR, Wang K, Markides CN. Challenges and opportunities for nanomaterials in spectral splitting for high-performance hybrid solar photovoltaic-thermal applications: A review. NANO MATERIALS SCIENCE 2020. [DOI: 10.1016/j.nanoms.2020.03.008] [Citation(s) in RCA: 44] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
6
|
Hameed S, Ali Shah S, Iqbal J, Numan M, Muhammad W, Junaid M, Shah S, Khurshid R, Umer F. Cannabis sativa-mediated synthesis of gold nanoparticles and their biomedical properties. BIOINSPIRED BIOMIMETIC AND NANOBIOMATERIALS 2020. [DOI: 10.1680/jbibn.19.00023] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
Affiliation(s)
- Safia Hameed
- Department of Biotechnology, Quaid-i-Azam University, Islamabad, Pakistan
| | - Sajjad Ali Shah
- Department of Biotechnology, Bacha Khan University Charsadda, Charsadda, Pakistan
| | - Javed Iqbal
- Department of Plant Sciences, Quaid-i-Azam University, Islamabad, Pakistan
| | - Muhammad Numan
- Department of Biotechnology, Quaid-i-Azam University, Islamabad, Pakistan
| | - Wali Muhammad
- Department of Biotechnology, Quaid-i-Azam University, Islamabad, Pakistan
| | - Muhammad Junaid
- Department of Biotechnology, Bacha Khan University Charsadda, Charsadda, Pakistan
| | - Sumaira Shah
- Department of Botany, Bacha Khan University Charsadda, Charsadda, Pakistan
| | - Razia Khurshid
- Department of Biotechnology, Quaid-i-Azam University, Islamabad, Pakistan
| | - Fazal Umer
- Department of Biotechnology, Bacha Khan University Charsadda, Charsadda, Pakistan
| |
Collapse
|
7
|
César Prado Soares M, Santos Rodrigues M, Alexandre Schenkel E, Perli G, Hideak Arita Silva W, Kauê Gomes M, Fujiwara E, Kenichi Suzuki C. Evaluation of Silica Nanofluids in Static and Dynamic Conditions by an Optical Fiber Sensor. SENSORS (BASEL, SWITZERLAND) 2020; 20:s20030707. [PMID: 32012875 PMCID: PMC7039219 DOI: 10.3390/s20030707] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/13/2019] [Revised: 01/12/2020] [Accepted: 01/20/2020] [Indexed: 05/28/2023]
Abstract
This work presents an optical fiber dynamic light scattering sensor capable of simultaneously assessing concentration and flow speed of nanofluids. Silica nanoparticles (189 nm) in water were tested, yielding a sensitivity of 0.78288 × 10³ s-1 for static conditions. Then, the sensor was submitted to situations that simulate spatial concentration changes, offering better results than those obtained by traditional mathematical models. Finally, in flow tests, the light backscattered by the nanoparticles were collected by a fiber probe placed parallel to the streamline, whereas intensity values were processed by artificial neural networks. The sensor provides average errors of 0.09 wt% and 0.26 cm/s for concentration and speed measurements, respectively, and can be further applied to assess different types of nanofluids and inline processes.
Collapse
|
8
|
Zhu H, Jiang X. Development of a General Fabrication Strategy for Carbonaceous Noble Metal Nanocomposites with Photothermal Property. NANOSCALE RESEARCH LETTERS 2020; 15:17. [PMID: 31965343 PMCID: PMC6974232 DOI: 10.1186/s11671-019-3242-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/26/2019] [Accepted: 12/27/2019] [Indexed: 06/10/2023]
Abstract
This study demonstrates a simple hydrothermal method while can be generalized for controllable synthesis of noble metallic carbonaceous nanostructures (e.g., Au@C, Ag@C) under mild conditions (180-200 °C), which also provides a unique approach for fabricating hollow carbonaceous structures by removal of cores (e.g., silver) via a redox etching process. The microstructure and composition of the as-achieved nanoparticles have been characterized using various microscopic and spectroscopic techniques. Cetyltrimethylammonium bromide (CTAB), serving as a surfactant in the reaction system, plays a key role in the formation of Ag@C, Au@C nanocables, and their corresponding hollow carbonaceous nanotubes in this work. The dynamic growth and formation mechanism of carbonaceous nanostructures was discussed in detail. And finally, laser-induced photothermal property of Au@C nanocomposites was examined. The results may be useful for designing and constructing carbonaceous metal(s) or metal oxide(s) nanostructures with potential applications in the areas of electrochemical catalysis, energy storage, adsorbents, and biomedicine. This study demonstrate a facile hydrothermal synthesis of noble metal carbonaceous nanocomposites (e.g., Au@C) with simple procedures under mild conditions, which can be25expanded as a general method for preparing diverse carbonaceous core-shell nanoparticles. The Au@C carbonaceous nanostructures exhibit interesting UV-Vis properties dependent upon shell thickness.
Collapse
Affiliation(s)
- Hongmei Zhu
- School of Mechanical Engineering, University of South China, Hengyang, 421001, Hunan, China
| | - Xuchuan Jiang
- Department of Chemical Engineering, Monash University, Clayton, VIC, 3800, Australia.
| |
Collapse
|
9
|
Optimisation of thermo-optical properties of SiO2/Ag–CuO nanofluid for direct absorption solar collectors. J Mol Liq 2019. [DOI: 10.1016/j.molliq.2019.111986] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
10
|
Experimental Testing of Hydrophobic Microchannels, with and without Nanofluids, for Solar PV/T Collectors. ENERGIES 2019. [DOI: 10.3390/en12153036] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/02/2023]
Abstract
Solar energy can be converted into useful energy via photovoltaic cells or with a photothermal absorber. While these technologies are well-developed and commercially viable, significant benefits can be realised by pulling these two technologies together in photovoltaic/thermal (PV/T) systems which can provide both heat and electricity from a single collector. Emerging configurations in the PV/T field aim to incorporate micro and/or nanotechnology to boost total solar utilisation even further. One example of this is the nanofluid-based PV/T collector. This type of solar collector utilises nanofluids—suspensions of nanoparticles in traditional heat transfer fluids—as both an optical filter and as a thermal absorber. This concept seeks to harvest the whole solar spectrum at its highest thermodynamic potential through specially engineered nanofluids which transmit the portion of solar spectrum corresponding to the PV response curve while absorbing the rest as heat. Depending on the nanoparticle concentration, employing nanofluids in a flowing system may come with a price—an efficiency penalty in the form of increased pumping power (due to increased viscosity). Similarly, microchannel-based heat exchangers have been shown to increase heat transfer, but they may also pay the price of high pumping power due to additional wall-shear-related pressure drop (i.e., more no-slip boundary area). To develop a novel PV/T configuration which pulls together the advantages of these micro and nanotechnologies with minimal pumping power requirements, the present study experimentally investigated the use of nanofluids in patterned hydrophobic microchannels. It was found that slip with the walls reduced the impact of the increased viscosity of nanofluids by reducing the pressure drop on average 17% relative to a smooth channel. In addition, flowing a selective Ag/SiO2 core–shell nanofluid over a silicon surface (simulating a PV cell underneath the fluid) provided a 20% increase in solar thermal conversion efficiency and ~3% higher stagnation temperature than using pure water. This demonstrates the potential of this proposed system for extracting more useful energy from the same incident flux. Although no electrical energy was extracted from the underlying patterned silicon, this study highlights potential a new development path for micro and nanotechnology to be integrated into next-generation PV/T solar collectors.
Collapse
|
11
|
|
12
|
|
13
|
Taylor RA, Hewakuruppu Y, DeJarnette D, Otanicar TP. Comparison of selective transmitters for solar thermal applications. APPLIED OPTICS 2016; 55:3829-3839. [PMID: 27168300 DOI: 10.1364/ao.55.003829] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Solar thermal collectors are radiative heat exchangers. Their efficacy is dictated predominantly by their absorption of short wavelength solar radiation and, importantly, by their emission of long wavelength thermal radiation. In conventional collector designs, the receiver is coated with a selectively absorbing surface (Black Chrome, TiNOx, etc.), which serves both of these aims. As the leading commercial absorber, TiNOx consists of several thin, vapor deposited layers (of metals and ceramics) on a metal substrate. In this technology, the solar absorption to thermal emission ratio can exceed 20. If a solar system requires an analogous transparent component-one which transmits the full AM1.5 solar spectrum, but reflects long wavelength thermal emission-the technology is much less developed. Bespoke "heat mirrors" are available from optics suppliers at high cost, but the closest mass-produced commercial technology is low-e glass. Low-e glasses are designed for visible light transmission and, as such, they reflect up to 50% of available solar energy. To address this technical gap, this study investigated selected combinations of thin films that could be deposited to serve as transparent, selective solar covers. A comparative numerical analysis of feasible materials and configurations was investigated using a nondimensional metric termed the efficiency factor for selectivity (EFS). This metric is dependent on the operation temperature and solar concentration ratio of the system, so our analysis covered the practical range for these parameters. It was found that thin films of indium tin oxide (ITO) and ZnS-Ag-ZnS provided the highest EFS. Of these, ITO represents the more commercially viable solution for large-scale development. Based on these optimized designs, proof-of-concept ITO depositions were fabricated and compared to commercial depositions. Overall, this study presents a systematic guide for creating a new class of selective, transparent optics for solar thermal collectors.
Collapse
|
14
|
Smirnov E, Peljo P, Scanlon MD, Gumy F, Girault HH. Self-healing gold mirrors and filters at liquid-liquid interfaces. NANOSCALE 2016; 8:7723-7737. [PMID: 27001646 DOI: 10.1039/c6nr00371k] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
The optical and morphological properties of lustrous metal self-healing liquid-like nanofilms were systematically studied for different applications (e.g., optical mirrors or filters). These nanofilms were formed by a one-step self-assembly methodology of gold nanoparticles (AuNPs) at immiscible water-oil interfaces, previously reported by our group. We investigated a host of experimental variables and herein report their influence on the optical properties of nanofilms: AuNP mean diameter, interfacial AuNP surface coverage, nature of the organic solvent, and nature of the lipophilic organic molecule that caps the AuNPs in the interfacial nanofilm. To probe the interfacial gold nanofilms we used in situ (UV-vis-NIR spectroscopy and optical microscopy) as well as ex situ (SEM and TEM of interfacial gold nanofilms transferred to silicon substrates) techniques. The interfacial AuNP surface coverage strongly influenced the morphology of the interfacial nanofilms, and in turn their maximum reflectance and absorbance. We observed three distinct morphological regimes; (i) smooth 2D monolayers of "floating islands" of AuNPs at low surface coverages, (ii) a mixed 2D/3D regime with the beginnings of 3D nanostructures consisting of small piles of adsorbed AuNPs even under sub-full-monolayer conditions and, finally, (iii) a 3D regime characterised by the 2D full-monolayer being covered in significant piles of adsorbed AuNPs. A maximal value of reflectance reached 58% in comparison with a solid gold mirror, when 38 nm mean diameter AuNPs were used at a water-nitrobenzene interface. Meanwhile, interfacial gold nanofilms prepared with 12 nm mean diameter AuNPs exhibited the highest extinction intensities at ca. 690 nm and absorbance around 90% of the incident light, making them an attractive candidate for filtering applications. Furthermore, the interparticle spacing, and resulting interparticle plasmon coupling derived optical properties, varied significantly on replacing tetrathiafulvalene with neocuproine as the AuNP capping ligand in the nanofilm. These interfacial nanofilms formed with neocuproine and 38 nm mean diameter AuNPs, at monolayer surface coverages and above, were black due to aggregation and broadband absorbance.
Collapse
Affiliation(s)
- Evgeny Smirnov
- Laboratoire d'Electrochimie Physique et Analytique, Ecole Polytechnique Fédérale de Lausanne, Rue de l'Industrie 17, CH-1951 Sion, Switzerland.
| | - Pekka Peljo
- Laboratoire d'Electrochimie Physique et Analytique, Ecole Polytechnique Fédérale de Lausanne, Rue de l'Industrie 17, CH-1951 Sion, Switzerland.
| | - Micheál D Scanlon
- Department of Chemistry, the Tyndall National Institute and the Analytical & Biological Chemistry Research Facility (ABCRF), University College Cork, Cork, Ireland
| | - Frederic Gumy
- Laboratoire d'Electrochimie Physique et Analytique, Ecole Polytechnique Fédérale de Lausanne, Rue de l'Industrie 17, CH-1951 Sion, Switzerland.
| | - Hubert H Girault
- Laboratoire d'Electrochimie Physique et Analytique, Ecole Polytechnique Fédérale de Lausanne, Rue de l'Industrie 17, CH-1951 Sion, Switzerland.
| |
Collapse
|
15
|
Jeon J, Park S, Lee BJ. Optical property of blended plasmonic nanofluid based on gold nanorods. OPTICS EXPRESS 2014; 22 Suppl 4:A1101-A1111. [PMID: 24978073 DOI: 10.1364/oe.22.0a1101] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Present work experimentally characterizes the optical property of blended plasmonic nanofuids based on gold nanorod (AuNR) with different aspect ratios. The existence of localized surface plasmon resonance was verified from measured extinction coefficient of three AuNR solutions, and spectral tunability of AuNR nanofluid was successfully demonstrated in the visible and near-infrared spectral region. The representative aspect ratio and volume fraction of each sample were then calculated from the relation between extinction coefficient and extinction efficiency, which leads to the design of a blended plasmonic nanofluid having broad-band absorption characteristic in the visible and near-infrared spectral region. The results obtained from this study will facilitate the development of a novel volumetric solar thermal collectors using plasmonic nanofluids.
Collapse
|
16
|
Taylor RA, Kai Wong J, Baek S, Hewakuruppu Y, Jiang X, Chen C, Gunawan A. Nanoparticle-Assisted Heating Utilizing a Low-Cost White Light Source. J Nanotechnol Eng Med 2014. [DOI: 10.1115/1.4027643] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
In this experimental study, a filtered white light is used to induce heating in water-based dispersions of 20 nm diameter gold nanospheres (GNSs)—enabling a low-cost form of plasmonic photothermal heating. The resulting temperature fields were measured using an infrared (IR) camera. The effect of incident radiative flux (ranging from 0.38 to 0.77 W·cm−2) and particle concentration (ranging from 0.25–1.0 × 1013 particles per mL) on the solution's temperature were investigated. The experimental results indicate that surface heat treatments via GNSs can be achieved through complementary tuning of GNS solutions and filtered light.
Collapse
Affiliation(s)
- Robert A. Taylor
- Mem. ASME School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia e-mail:
| | - Jun Kai Wong
- School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia
| | - Sungchul Baek
- School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia
| | - Yasitha Hewakuruppu
- School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia
| | - Xuchuan Jiang
- School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052, Australia
| | - Chuyang Chen
- School of Materials Science and Engineering, University of New South Wales, Sydney, NSW 2052, Australia
| | - Andrey Gunawan
- School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, AZ 85287-6106
| |
Collapse
|
17
|
Investigation on nanoparticle distribution for thermal ablation of a tumour subjected to nanoparticle assisted thermal therapy. J Therm Biol 2014; 43:70-80. [PMID: 24956960 DOI: 10.1016/j.jtherbio.2014.05.003] [Citation(s) in RCA: 46] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2013] [Revised: 04/16/2014] [Accepted: 05/12/2014] [Indexed: 02/08/2023]
Abstract
This study investigates the effect of the distribution of nanoparticles delivered to a skin tumour for the thermal ablation conditions attained during thermal therapy. Ultimate aim is to define a distribution of nanoparticles as well as a combination of other therapeutic parameters to attain thermal ablation temperatures (50-60 °C) within whole of the tumour region. Three different cases of nanoparticle distributions are analysed under controlled conditions for all other parameters viz. irradiation intensity and duration, and volume fraction of nanoparticles. Results show that distribution of nanoparticles into only the periphery of tumour resulted in desired thermal ablation temperature in whole of tumour. For the tumour size considered in this study, an irradiation intensity of 1.25 W/cm(2) for duration of 300 s and a nanoparticle volume fraction of 0.001% was optimal to attain a temperature of ≥53 °C within the whole tumour region. It is concluded that distribution of nanoparticles in peripheral region of tumour, along with a controlled combination of other parameters, seems favourable and provides a promising pathway for thermal ablation of a tumour subjected to nanoparticle assisted thermal therapy.
Collapse
|