Coherent beam transformations using multimode waveguides

Dynamically Encircling Exceptional Points in Different Riemann Sheets for Orbital Angular Momentum Topological Charge Conversion

Orbital angular momentum (OAM) provides an additional degree of freedom for optical communication systems, and manipulating on-chip OAM is important in integrated photonics. However, there is no effective method to realize OAM topological charge conversion on chip. In this Letter, we propose a way to convert OAM by encircling two groups of exceptional points in different Riemann sheets. In our framework, any OAM conversion can be achieved on demand just by manipulating adiabatic and nonadiabatic evolution of modes in two on-chip waveguides. More importantly, the chiral OAM conversion is realized, which is of great significance since the path direction can determine the final topological charge order. Our Letter presents a special chiral behavior and provides a new method to manipulate OAM on the chip.

All-fiber few-mode interference for complex azimuthal pattern generation

We report on an all-fiber setup capable of generating complex intensity patterns using interference of few guided modes. Comprised by a few-mode fiber (FMF) spliced to a multimodal interference (MMI) fiber device, the setup allows for obtaining different output patterns upon adjusting the phases and intensities of the modes propagating in the FMF. We analyze the output patterns obtained when exciting two family modes in the MMI device using different phase and intensity conditions for the FMF modal base. Using this simple experimental arrangement we are able to produce complex intensity patterns with radial and azimuthal symmetry. Moreover, our results suggest that this approach provides a means to generate beams with orbital angular momentum (OAM).

Optical manipulation of a dielectric particle along polygonal closed-loop geometries within a single water droplet

We report a new method to optically manipulate a single dielectric particle along closed-loop polygonal trajectories by crossing a suite of all-fiber Bessel-like beams within a single water droplet. Exploiting optical radiation pressure, this method demonstrates the circulation of a single polystyrene bead in both a triangular and a rectangle geometry enabling the trapped particle to undergo multiple circulations successfully. The crossing of the Bessel-like beams creates polygonal corners where the trapped particles successfully make abrupt turns with acute angles, which is a novel capability in microfluidics. This offers an optofluidic paradigm for particle transport overcoming turbulences in conventional microfluidic chips.

Static laser speckle suppression using liquid light guides

Static laser speckle suppression using multimode fibers has practical limitations as the technique requires an extremely long fiber to achieve an acceptable speckle contrast. An effective method based on liquid light guides was developed in this study to suppress laser speckle. In this study, a speckle simulation model of the liquid light guide was established for numerically calculating the speckle contrast without solving the analytical solution of the photon diffusion equation. The obtained simulation results were compared with the experimental results for the dependence of speckle contrast on the required length and numerical aperture with different liquid core types of liquid light guides. A speckle contrast of 12% and a speckle suppression efficiency of 5 was achieved at the end of a 2.4 m long liquid light guide. For the same fiber length, liquid light guides were found to suppress speckle more efficiently when compared to multimode fibers.

Non-Hermitian multimode interference

Multimode interference (MMI) and self-imaging are important phenomena of diffractive optics with major applications in signal processing, beam shaping, and optical sensing. Such phenomena generally arise from interference of normal modes in lossless dielectric guiding structures; however, the impact of spatially inhomogeneous optical gain and loss, which break mode orthogonality and symmetries, has been overlooked. Here we consider MMI in non-Hermitian optical systems, either graded-index or coupled optical waveguide structures, and reveal distinctive features, such as the absence of mirror images and strong sensitivity of self-imaging to perturbations, making MMI in non-Hermitian waveguides of interest in optical sensing.

Artificial compound eye-tipped optical fiber for wide field illumination

In this Letter, we present a novel, to the best of our knowledge, component with beam delivering and wide field beam homogenizing functions by grafting an artificial compound eye (ACE) micro-structure onto the polymer optical fiber (POF) end face. The 3D ACE mold is fabricated by femtosecond laser-assisted micro machining, and the ACE micro-structure is transferred onto the end face through high accuracy nano-imprinting. The resultant POF end face integrates over 400 spherical micro-lenses, enabling a 40% enhancement in both the acceptance angle and the effective numerical aperture. Meanwhile, the integrated ommatidia array serves as an outstanding beam homogenizer, shaping the output beam into quasi flat-top distribution, which demonstrates promise in wide field homogeneous illumination, by reflection and transmission imaging experiments in both visible and near infrared bands.

Fiber-coupled ultrashort-pulse-laser-based electronic-excitation tagging velocimetry

Transmission of intense ultrashort laser pulses through hollow-core fibers (HCFs) is investigated for molecular-tagging velocimetry. A low-vacuumed HCF beam-delivery system is developed to transmit high-peak-power pulses. Vacuum pressure effects on transmission efficiency and nonlinear effects at the fiber output are studied for 100 ps and 100 fs laser beams. With a 0.1 bar vacuum in the fiber, transmission efficiency increases by ∼30%, while spectral broadening is reduced. A 1 m long, 1 mm core metal-dielectric-coated HCF can transmit ∼45  mJ/pulse and ∼2.9  mJ/pulse for 100 ps laser pulses (at 532 nm) and 100 fs laser pulses (at 810 nm), respectively. Proof-of-principle, single-laser-shot, fiber-coupled, ps and fs laser-based, nitrogen electronic-excitation tagging velocimetry is demonstrated in a free jet. Flow velocities are measured at 200 kHz to capture high-frequency flow events.

Power Flow in a Large-Core Multimode Fiber under External Perturbation and its Applications

Large core optical multimode fiber provides benefits such as a large light-coupling tolerance, easy handling, and delivery of higher light power without undesirable nonlinear effects. In this research, we exploit the effects of external perturbation on the power flow within the large core fiber and present two relevant applications, namely a perturbation sensor and a doughnut beam tuner. Since conventional multimode fiber power flow model does not take into consideration the perturbation effect, we modify the power flow model so that the influence of time varying perturbation can be theoretically analyzed. Based on our theory, we further conduct the numerical simulation and experiments on these two applications. For the fiber vibration sensor, the proposed numerical model shows that the sensor sensitivity depends on the intensity profile of the launched beam and also the higher-order harmonics that were not reported previously can become interferences to affect the signal. For the beam tuner application, we prove both theoretically and experimentally that the doughnut intensity profile at the fiber output can be tuned in real-time by applying external perturbations to the fiber. We expect that the results can be useful to further exploit the external perturbation on large core fiber in various applications.

Passive Q-switching of an all-fiber laser induced by the Kerr effect of multimode interference

A novel passively Q-switched all-fiber laser using a single mode-multimode-single mode fiber device as the saturable absorber based on the Kerr effect of multimode interference is reported. Stable Q-switched operation of an Er(3+)/Yb(3+) co-doped fiber laser at 1559.5 nm was obtained at a pump power range of 190-510 mW with the repetition rate varying from 14.1 kHz to 35.2 kHz and the pulse duration ranging from 5.69 μs to 3.86 μs. A maximum pulse energy of 0.8 μJ at an average output power of 27.6 mW was achieved. This demonstrates a new modulation mechanism for realizing Q-switched all-fiber laser sources.

Adaptive optics SLO/OCT for 3D imaging of human photoreceptors in vivo

We present a new instrument that is capable of imaging human photoreceptors in three dimensions. To achieve high lateral resolution, the system incorporates an adaptive optics system. The high axial resolution is achieved through the implementation of optical coherence tomography (OCT). The instrument records simultaneously both, scanning laser ophthalmoscope (SLO) and OCT en-face images, with a pixel to pixel correspondence. The information provided by the SLO is used to correct for transverse eye motion in post-processing. In order to correct for axial eye motion, the instrument is equipped with a high speed axial eye tracker. In vivo images of foveal cones as well as images recorded at an eccentricity from the fovea showing cones and rods are presented.

Investigation of optical fibers for high-repetition-rate, ultraviolet planar laser-induced fluorescence of OH

We investigate the fundamental transmission characteristics of nanosecond-duration, 10 kHz repetition rate, ultraviolet (UV) laser pulses through state-of-the-art, UV-grade fused-silica fibers being used for hydroxyl radical (OH) planar laser-induced fluorescence (PLIF) imaging. Studied in particular are laser-induced damage thresholds (LIDTs), nonlinear absorption, and optical transmission stability during long-term UV irradiation. Solarization (photodegradation) effects are significantly enhanced when the fiber is exposed to high-repetition-rate, 283 nm UV irradiation. For 10 kHz laser pulses, two-photon absorption is strong and LIDTs are low, as compared to those of laser pulses propagating at 10 Hz. The fiber characterization results are utilized to perform single-laser-shot, OH-PLIF imaging in pulsating turbulent flames with a laser that operates at 10 kHz. The nearly spatially uniform output beam that exits a long multimode fiber becomes ideal for PLIF measurements. The proof-of-concept measurements show significant promise for extending the application of a fiber-coupled, high-speed OH-PLIF system to harsh environments such as combustor test beds, and potential system improvements are suggested.

Investigation of optical fibers for gas-phase, ultraviolet laser-induced-fluorescence (UV-LIF) spectroscopy

We investigate the feasibility of transmitting high-power, ultraviolet (UV) laser pulses through long optical fibers for laser-induced-fluorescence (LIF) spectroscopy of the hydroxyl radical (OH) and nitric oxide (NO) in reacting and non-reacting flows. The fundamental transmission characteristics of nanosecond (ns)-duration laser pulses are studied at wavelengths of 283 nm (OH excitation) and 226 nm (NO excitation) for state-of-the-art, commercial UV-grade fibers. It is verified experimentally that selected fibers are capable of transmitting sufficient UV pulse energy for single-laser-shot LIF measurements. The homogeneous output-beam profile resulting from propagation through a long multimode fiber is ideal for two-dimensional planar-LIF (PLIF) imaging. A fiber-coupled UV-LIF system employing a 6 m long launch fiber is developed for probing OH and NO. Single-laser-shot OH- and NO-PLIF images are obtained in a premixed flame and in a room-temperature NO-seeded N(2) jet, respectively. Effects on LIF excitation lineshapes resulting from delivering intense UV laser pulses through long fibers are also investigated. Proof-of-concept measurements demonstrated in the current work show significant promise for fiber-coupled UV-LIF spectroscopy in harsh diagnostic environments such as gas-turbine test beds.

Low-loss coupling between two single-mode optical fibers with different mode-field diameters using a graded-index multimode optical fiber

We present a method for ultra-low-loss coupling between two single-mode optical fibers with different mode-field diameters using multimode interference in a graded-index multimode optical fiber. We perform a detailed analysis of the interference effects and show that the graded-index fiber can also be used as a beam expander or condenser. The results are important for devices in which optical fibers with different mode-field diameters are coupled in series, such as in ultra-short-pulse fiber ring lasers, or in optical fiber communication links.

White light Bessel-like beams generated by miniature all-fiber device

Micron-sized white light propagation invariant beams generated by a simple and compact fiber device are presented. The all-fiber device is fabricated by splicing a short piece of large-core multimode fiber onto a small-core single mode white light delivery fiber. Because this fiber device offers an inherent spatial coherence, nondiffracting white light beams can be created with a temporally incoherent broadband light source (a halogen bulb) and, most importantly, the surrounding fringes don't fade as the bandwidth of the light source increases because the underlying physics of this fiber device is different from that of the axicon. White light Bessel-like beams have been generated from multimode fibers with core diameters of 50 μm, 105 μm, and 200 μm. The distance of nondiffracting propagation of the white light Bessel beam increases with increasing core size of the multimode fiber. Propagation characteristics of red, green, and blue individual beams are also presented.

All-silica fiber Bessel-like beam generator and its applications in longitudinal optical trapping and transport of multiple dielectric particles

A Bessel-like beam was generated in a novel all-fiber integrated structure. A concentric ring intensity pattern was achieved by the multimode interference along the coreless silica fiber, which was then focused by the integrated micro-lens to result in a Bessel-like beam. The average beam diameter of 7.5 μm maintained over 500 μm axial length for a continuous wave Yb-doped fiber laser input oscillating at the wavelength of 1.08 μm. The generated beam was successfully applied to two-dimension optical trapping and longitudinal transport of multiple dielectric particles confirming its unique non-diffracting and self-reconstructing nature. Physical principle of operation, fabrication, and experimental results are discussed.