Off-Line Concentration of Bisphenol A and Three Alkylphenols by SPE then On-Line Concentration and Rapid Separation by Reverse-Migration Micellar Electrokinetic Chromatography

Carbon composite membrane derived from MIL-125-NH2 MOF for the enhanced extraction of emerging pollutants

Porous carbon derived from amine-functionalized MIL-125 metal-organic framework (C-MIL-125-NH₂) was prepared by carbonization at high temperature under inert atmosphere, and used for adsorption of bisphenol A (BPA) and 4-tert-butylphenol (4-tBP). The obtained carbon showed bimodal porosity and fast extraction of both pollutants in batch conditions following a pseudo-second-order model. The adsorption mechanism was studied by the measurement of zeta potential, and the results suggested that π-π stacking interactions between the carbon material and the phenol molecules probably are the main sorption mechanism. The prepared C-MIL-125-NH₂ was incorporated into mechanically stable membranes for flow-through solid-phase extraction of studied phenols prior to HPLC analysis. The hybrid material showed excellent permeance to flow, easy regeneration and good performance for the simultaneous enrichment of mixtures of BPA and 4-tBP, facilitating their determination when present at low concentration levels.

In Situ Determination of Bisphenol A in Beverage Using a Molybdenum Selenide/Reduced Graphene Oxide Nanoparticle Composite Modified Glassy Carbon Electrode

Due to the endocrine disturbing effects of bisphenol A (BPA) on organisms, rapid detection has become one of the most important techniques for monitoring its levels in the aqueous solutions associated with plastics and human beings. In this paper, a glassy carbon electrode (GCE) modified with molybdenum selenide/reduced graphene oxide (MoSe₂/rGO) was fabricated for in situ determination of bisphenol A in several beverages. The surface area of the electrode dramatically increases due to the existence of ultra-thin nanosheets in a flower-like structure of MoSe₂. Adding phosphotungstic acid in the electrolyte can significantly enhance the repeatability (RSD = 0.4%) and reproducibility (RSD = 2.2%) of the electrode. Under the optimized condition (pH = 6.5), the linear range of BPA was from 0.1 μM⁻100 μM and the detection limit was 0.015 μM (S/N = 3). When using the as-prepared electrode for analyzing BPA in beverage samples without any pretreatments, the recoveries ranged from 98⁻107%, and the concentrations were from below the detection limit to 1.7 μM, indicating its potential prospect for routine analysis of BPA.

MEKC: An update focusing on practical aspects

This paper reviews recent methodological and instrumental advances in MEKC. Improvements in sensitivity arising from the use of on-line sample concentration (sweeping, stacking, and combination of both protocols) and derivatization (in-capillary reactions and coupling with flow-injection systems) and improvements in resolution obtained by changing the composition of the BGE (e.g., with organic modifiers, ionic liquids, nonionic and zwitterionic surfactants, mixed micelles, and vesicles) or using coated capillaries are discussed in detail. In addition, MS and LIF spectroscopy are examined in relation to their advantages and restrictions as applied to MEKC analysis. Some thoughts on potential future directions are also expressed.

Recent advances in capillary electrophoresis and capillary electrochromatography of pollutants

Recent advances in the CE and CEC separation, detection, and sample preparation methodologies applied to the determination of a variety of compounds having current or potential environmental relevance have been overviewed. The reviewed literature has illustrated the wide range of CE applications, indicating the continuing interest in CE and CEC in the environmental field.

On-chip micellar electrokinetic chromatographic separation of phenolic chemicals in waters

This paper describes on-chip micellar electrokinetic chromatography (MEKC) separation of bisphenol A and 3 kinds of alkylphenols, which have been recently recognized as endocrine disrupting chemicals for fish by the Japanese government, using microchip capillary electrophoresis with UV detection. We successfully obtained high-speed separation of the phenolic chemicals within 15 s as optimizing in microfluidic controls and MEKC separation conditions. We obtained fairly good linearity with correlation coefficient of over 0.98 from 0 to 50 mg/l phenolic chemicals except for 4-nonylphenol, which sample is the mixture of many geometrical isomers (r = 0.86). The values of the relative standard deviation for peak height in 50 mg/l phenolic chemicals were less than 8% except for bisphenol A (11.0%). The limits of detection obtained at a signal-to-noise ratio of 3 were from 5.6 to 20.0 mg/l. To realize on-site monitoring, we described strategy for on-chip MEKC analysis of the phenolic chemicals in waters using a portable analyzer based on microfluidic devices.