Quantitative determination of citric acid in seminal plasma by using Raman spectroscopy

A novel fluorescence sensor based on Al3+-mediated aggregation of gold nanoclusters for determination of citric acid in beverages

This paper revealed a new strategy for citric acid (CA) detection using aggregation-induced emission (AIE)-based fluorescent gold nanoclusters (AuNCs). AuNCs was synthesized using glutathione (GSH) as the template and reducing agent and used as the fluorescent probe to detect CA under aluminum ion (Al3+) mediation. The fluorescence intensity of AuNCs increased about 4 times with the addition of Al3+, but the enhanced fluorescence was quenched after the addition of CA. Based on this fluorescence phenomenon, an "on-off" fluorescence strategy was designed for the sensitive determination of CA and a linear detection range for CA was achieved within 0-80.0 μM. In addition, the developed probe exhibited high selectivity and accuracy for determination of CA. The mechanism of fluorescence enhancement and quenching of AuNCs was explored in detail. The established probe was used successfully for CA detection in beverages. The spiked recoveries from 97.50% to 103.67% were gratifying, which indicated the probe had potential prospects for detecting CA in food.

Chitosan/Alginate Nanogels Containing Multicore Magnetic Nanoparticles for Delivery of Doxorubicin

In this study, multicore-like iron oxide (Fe3O4) and manganese ferrite (MnFe2O4) nanoparticles were synthesized and combined with nanogels based on chitosan and alginate to obtain a multimodal drug delivery system. The nanoparticles exhibited crystalline structures and displayed sizes of 20 ± 3 nm (Fe3O4) and 11 ± 2 nm (MnFe2O4). The Fe3O4 nanoparticles showed a higher saturation magnetization and heating efficiency compared with the MnFe2O4 nanoparticles. Functionalization with citrate and bovine serum albumin was found to improve the stability and modified surface properties. The nanoparticles were encapsulated in nanogels, and provided high drug encapsulation efficiencies (~70%) using doxorubicin as a model drug. The nanogels exhibited sustained drug release, with enhanced release under near-infrared (NIR) laser irradiation and acidic pH. The nanogels containing BSA-functionalized nanoparticles displayed improved sustained drug release at physiological pH, and the release kinetics followed a diffusion-controlled mechanism. These results demonstrate the potential of synthesized nanoparticles and nanogels for controlled drug delivery, offering opportunities for targeted and on-demand release in biomedical applications.

Exploring the Impact of Nitrogen Doping on the Optical Properties of Carbon Dots Synthesized from Citric Acid

The differences between bare carbon dots (CDs) and nitrogen-doped CDs synthesized from citric acid as a precursor are investigated, aiming at understanding the mechanisms of emission and the role of the doping atoms in shaping the optical properties. Despite their appealing emissive features, the origin of the peculiar excitation-dependent luminescence in doped CDs is still debated and intensively being examined. This study focuses on the identification of intrinsic and extrinsic emissive centers by using a multi-technique experimental approach and computational chemistry simulations. As compared to bare CDs, nitrogen doping causes the decrease in the relative content of O-containing functional groups and the formation of both N-related molecular and surface centers that enhance the quantum yield of the material. The optical analysis suggests that the main emission in undoped nanoparticles comes from low-efficient blue centers bonded to the carbogenic core, eventually with surface-attached carbonyl groups, the contribution in the green range being possibly related to larger aromatic domains. On the other hand, the emission features of N-doped CDs are mainly due to the presence of N-related molecules, with the computed absorption transitions calling for imidic rings fused to the carbogenic core as the potential structures for the emission in the green range.

Adsorption of Paraquat by Poly(Vinyl Alcohol)-Cyclodextrin Nanosponges

The contamination of hydrosoluble pesticides in water could generate a serious problem for biotic and abiotic components. The removal of a hazardous agrochemical (paraquat) from water was achieved by adsorption processes using poly(vinyl alcohol)-cyclodextrin nanosponges, which were prepared with various formulations via the crosslinking between citric acid and β-cyclodextrin in the presence of poly(vinyl alcohol). The physicochemical properties of nanosponges were also characterized by different techniques, such as gravimetry, thermogravimetry, microscopy (SEM and Stereo), spectroscopy (UV-visible, NMR, ATR-FTIR, and Raman), acid-base titration, BET surface area analysis, X-ray diffraction, and ion exchange capacity. The C10D-P2 nanosponges displayed 60.2% yield, 3.14 mmol/g COOH groups, 0.335 mmol/g β-CD content, 96.4% swelling, 94.5% paraquat removal, 0.1766 m2 g-1 specific surface area, and 5.2 × 10-4 cm3 g-1 pore volume. The presence of particular peaks referring to specific functional groups on spectroscopic spectra confirmed the successful polycondensation on the reticulated nanosponges. The pseudo second-order model (with R2 = 0.9998) and Langmuir isotherm (with R2 = 0.9979) was suitable for kinetics and isotherm using 180 min of contact time and a pH of 6.5. The maximum adsorption capacity was calculated at 112.2 mg/g. Finally, the recyclability of these nanosponges was 90.3% of paraquat removal after five regeneration times.

Effect of Excipients on Salt Disproportionation during Dissolution: A Novel Application of In Situ Raman Imaging

We have employed a bespoke setup combining confocal Raman microscopy and an ultraviolet-visible (UV-Vis) spectroscopy flow cell to investigate the effect of excipients on the disproportionation kinetics of Pioglitazone HCl (PioHCl) in tablets during dissolution. Three binary formulations of PioHCl, containing citric acid monohydrate (CA), lactose monohydrate (LM), or magnesium stearate (MgSt), respectively, were used as models to study the influence of excipients' physicochemical properties on the rate of salt disproportionation kinetics and dissolution performance in different aqueous pH environments. It was found that formulation excipients can induce or prevent salt disproportionation by modulating the microenvironmental pH regardless of the pH of the dissolution media. Incorporating CA in PioHCl tablets preserves the salt form and enhances the dissolution performance of the salt in the acidic medium (pH = 1.2). In contrast, LM and MgSt had a detrimental effect on in vitro drug performance by inducing salt disproportionation in the tablet during dissolution in the same acidic medium. Dissolution in the neutral medium (pH = 6.8) showed rapid formation of the free base upon contact with the dissolution medium. The Raman maps of the cross-sectioned tablets revealed the formation of a shell consisting of the free base around the edge of the tablet. This shell decreased the rate of penetration of the dissolution medium into the tablet, which had significant implications on the release of the API into the surrounding solution, as shown by the UV-vis absorption spectroscopy drug release data. Our findings highlight the utility of the Raman/UV-vis flow cell analytical platform as an advanced analytical technique to investigate the effect of excipients and dissolution media on salt disproportionation in real time. This methodology will be used to enhance our understanding of salt stability studies that may pave the way for more stable multicomponent formulations.

Compounded topographical and physicochemical cueing by micro-engineered chitosan substrates on rat dorsal root ganglion neurons and human mesenchymal stem cells

Given the intertwined physicochemical effects exerted in vivo by both natural and synthetic (e.g., biomaterial) interfaces on adhering cells, the evaluation of structure-function relationships governing cellular response to micro-engineered surfaces for applications in neuronal tissue engineering requires the use of in vitro testing platforms which consist of a clinically translatable material with tunable physiochemical properties. In this work, we micro-engineered chitosan substrates with arrays of parallel channels with variable width (20 and 60 μm). A citric acid (CA)-based crosslinking approach was used to provide an additional level of synergistic cueing on adhering cells by regulating the chitosan substrate's stiffness. Morphological and physicochemical characterization was conducted to unveil the structure-function relationships which govern the activity of rat dorsal root ganglion neurons (DRGs) and human mesenchymal stem cells (hMSCs), ultimately singling out the key role of microtopography, roughness and substrate's stiffness. While substrate's stiffness predominantly affected hMSC spreading, the modulation of the channels' design affected the neuronal architecture's complexity and guided the morphological transition of hMSCs. Finally, the combined analysis of tubulin expression and cell morphology allowed us to cast new light on the predominant role of the microtopography over substrate's stiffness in the process of hMSCs neurogenic differentiation.

From near-infrared and Raman to surface-enhanced Raman spectroscopy: progress, limitations and perspectives in bioanalysis

Over recent decades, spreading environmental concern entailed the expansion of green chemistry analytical tools. Vibrational spectroscopy, belonging to this class of analytical tool, is particularly interesting taking into account its numerous advantages such as fast data acquisition and no sample preparation. In this context, near-infrared, Raman and mainly surface-enhanced Raman spectroscopy (SERS) have thus gained interest in many fields including bioanalysis. The two former techniques only ensure the analysis of concentrated compounds in simple matrices, whereas the emergence of SERS improved the performances of vibrational spectroscopy to very sensitive and selective analyses. Complex SERS substrates were also developed enabling biomarker measurements, paving the way for SERS immunoassays. Therefore, in this paper, the strengths and weaknesses of these techniques will be highlighted with a focus on recent progress.