Restriction site extension PCR: a novel method for high-throughput characterization of tagged DNA fragments and genome walking

Identification of T-DNA structure and insertion site in transgenic crops using targeted capture sequencing

The commercialization of GE crops requires a rigorous safety assessment, which includes a precise DNA level characterization of inserted T-DNA. In the past, several strategies have been developed for identifying T-DNA insertion sites including, Southern blot and different PCR-based methods. However, these methods are often challenging to scale up for screening of dozens of transgenic events and for crops with complex genomes, like potato. Here, we report using target capture sequencing (TCS) to characterize the T-DNA structure and insertion sites of 34 transgenic events in potato. This T-DNA is an 18 kb fragment between left and right borders and carries three resistance (R) genes (RB, Rpi-blb2 and Rpi-vnt1.1 genes) that result in complete resistance to late blight disease. Using TCS, we obtained a high sequence read coverage within the T-DNA and junction regions. We identified the T-DNA breakpoints on either ends for 85% of the transgenic events. About 74% of the transgenic events had their T-DNA with 3R gene sequences intact. The flanking sequences of the T-DNA were from the potato genome for half of the transgenic events, and about a third (11) of the transgenic events have a single T-DNA insertion mapped into the potato genome, of which five events do not interrupt an existing potato gene. The TCS results were confirmed using PCR and Sanger sequencing for 6 of the best transgenic events representing 20% of the transgenic events suitable for regulatory approval. These results demonstrate the wide applicability of TCS for the precise T-DNA insertion characterization in transgenic crops.

Semi-Site-Specific Primer PCR: A Simple but Reliable Genome-Walking Tool

Genome-walking has been frequently applied to molecular biology and related areas. Herein, a simple but reliable genome-walking technique, termed semi-site-specific primer PCR (3SP-PCR), is presented. The key to 3SP-PCR is the use of a semi-site-specific primer in secondary PCR that partially overlaps its corresponding primary site-specific primer. A 3SP-PCR set comprises two rounds of nested amplification reactions. In each round of reaction, any primer is allowed to partially anneal to the DNA template once only in the single relaxed-stringency cycle, creating a pool of single-stranded DNAs. The target single-stranded DNA can be converted into a double-stranded molecule directed by the site-specific primer, and thus can be exponentially amplified by the subsequent high-stringency cycles. The non-target one cannot be converted into a double-strand due to the lack of a perfect binding site to any primer, and thus fails to be amplified. We validated the 3SP-PCR method by using it to probe the unknown DNA regions of rice hygromycin genes and Levilactobacillus brevis CD0817 glutamic acid decarboxylase genes.

Fusion primer driven racket PCR: A novel tool for genome walking

The limitations of the current genome-walking strategies include strong background and cumbersome experimental processes. Herein, we report a genome-walking method, fusion primer-driven racket PCR (FPR-PCR), for the reliable retrieval of unknown flanking DNA sequences. Four sequence-specific primers (SSP1, SSP2, SSP3, and SSP4) were sequentially selected from known DNA (5'→3′) to perform FPR-PCR. SSP3 is the fragment that mediates intra-strand annealing (FISA). The FISA fragment is attached to the 5′ end of SSP1, generating a fusion primer. FPR-PCR comprises two rounds of amplification reactions. The single-fusion primary FPR-PCR begins with the selective synthesis of the target first strand, then allows the primer to partially anneal to some place(s) on the unknown region of this strand, producing the target second strand. Afterward, a new first strand is synthesized using the second strand as the template. The 3′ end of this new first strand undergoes intra-strand annealing to the FISA site, followed by the formation of a racket-like DNA by a loop-back extension. This racket-like DNA is exponentially amplified in the secondary FPR-PCR performed using SSP2 and SSP4. We validated this FPR-PCR method by identifying the unknown flanks of Lactobacillus brevis CD0817 glutamic acid decarboxylase genes and the rice hygromycin gene.

Wristwatch PCR: A Versatile and Efficient Genome Walking Strategy

Genome walking is a method used to retrieve unknown flanking DNA. Here, we reported wristwatch (WW) PCR, an efficient genome walking technique mediated by WW primers (WWPs). WWPs feature 5′- and 3′-overlap and a heterologous interval. Therefore, a wristwatch-like structure can be formed between WWPs under relatively low temperatures. Each WW-PCR set is composed of three nested (primary, secondary, and tertiary) PCRs individually performed by three WWPs. The WWP is arbitrarily annealed somewhere on the genome in the one low-stringency cycle of the primary PCR, or directionally to the previous WWP site in one reduced-stringency cycle of the secondary/tertiary PCR, producing a pool of single-stranded DNAs (ssDNAs). A target ssDNA incorporates a gene-specific primer (GSP) complementary at the 3′-end and the WWP at the 5′-end and thus can be exponentially amplified in the next high-stringency cycles. Nevertheless, a non-target ssDNA cannot be amplified as it lacks a perfect binding site for any primers. The practicability of the WW-PCR was validated by successfully accessing unknown regions flanking Lactobacillus brevis CD0817 glutamate decarboxylase gene and the hygromycin gene of rice. The WW-PCR is an attractive alternative to the existing genome walking techniques.

Palindromic Sequence-Targeted (PST) PCR, Version 2: An Advanced Method for High-Throughput Targeted Gene Characterization and Transposon Display

Genome walking (GW), a strategy for capturing previously unsequenced DNA fragments that are in proximity to a known sequence tag, is currently predominantly based on PCR. Recently developed PCR-based methods allow for combining of sequence-specific primers with designed capturing primers capable of annealing to unknown DNA targets, thereby offering the rapidity and effectiveness of PCR. This study presents a methodological improvement to the previously described GW technique known as palindromic sequence-targeted PCR (PST-PCR). Like PST-PCR, this new method (called PST-PCR v.2) relies on targeting of capturing primers to palindromic sequences arbitrarily present in natural DNA templates. PST-PCR v.2 consists of two rounds of PCR. The first round uses a combination of one sequence-specific primer with one capturing (PST) primer. The second round uses a combination of a single (preferred) or two universal primers; one anneals to a 5' tail attached to the sequence-specific primer and the other anneals to a different 5' tail attached to the PST primer. The key advantage of PST-PCR v.2 is the convenience of using a single universal primer with invariable sequences in GW processes involving various templates. The entire procedure takes approximately 2-3 h to produce the amplified PCR fragment, which contains a portion of a template flanked by the sequence-specific and capturing primers. PST-PCR v.2 is highly suitable for simultaneous work with multiple samples. For this reason, PST-PCR v.2 can be applied beyond the classical task of GW for studies in population genetics, in which PST-PCR v.2 is a preferred alternative to amplified fragment length polymorphism (AFLP) or next-generation sequencing. Furthermore, the conditions for PST-PCR v.2 are easier to optimize, as only one sequence-specific primer is used. This reduces non-specific random amplified polymorphic DNA (RAPD)-like amplification and formation of non-templated amplification. Importantly, akin to the previous version, PST-PCR v.2 is not sensitive to template DNA sequence complexity or quality. This study illustrates the utility of PST-PCR v.2 for transposon display (TD), which is a method to characterize inter- or intra-specific variability related to transposon integration sites. The Ac transposon sequence in the maize (Zea mays) genome was used as a sequence tag during the TD procedure to characterize the Ac integration sites.

Development of event-specific detection method for identification of insect resistant NIBGE-1601 cotton harboring double gene Cry1Ac-Cry2Ab construct

Bt cotton expressing Cry1Ac is being cultivated in Pakistan. It has been observed that pink bollworm may have developed resistance against single Bt gene (Cry1Ac). For durable resistance, insect resistant NIBGE-1601 cotton harboring double gene Cry1Ac-Cry2Ab construct was developed. There was a need to characterize NIBGE-1601 event for intellectual property rights protection. The Presence of NIBGE Cry1Ac and NIBGE Cry2Ab genes was checked in NIBGE-1601 cotton plants through PCR, while there was no amplification using primers specific for Monsanto events (MON531, MON15985, MON1445). Using genome walking technology, NIBGE-601 event has been characterized. Event-specific primers of NIBGE-1601 were designed and evaluated to differentiate it from other cotton events mentioned above. NIBGE-1601 event detection primers are highly specific, therefore, can detect NIBGE 1601 event at different conditions using single or multiplex PCR. In the qualitative PCR, using NIBGE-1601 event specific primers, 0.05 ng was the limit of detection for NIBGE-1601double gene cotton genomic DNA. Thus event characterization and development of event-specific diagnostics will help in breeding new cotton varieties resistant to cotton bollworms.

Identification of genomic insertion and flanking sequences of the transgenic drought-tolerant maize line "SbSNAC1-382" using the single-molecule real-time (SMRT) sequencing method

Safety assessment of genetically modified (GM) crops is crucial at the product-development phase before GM crops are placed on the market. Determining characteristics of sequences flanking exogenous insertion sequences is essential for the safety assessment and marketing of transgenic crops. In this study, we used genome walking and whole-genome sequencing (WGS) to identify the flanking sequence characteristics of the SbSNAC1 transgenic drought-tolerant maize line "SbSNAC1-382", but both of the two methods failed. Then, we constructed a genomic fosmid library of the transgenic maize line, which contained 4.18×105 clones with an average insertion fragment of 35 kb, covering 5.85 times the maize genome. Subsequently, three positive clones were screened by pairs of specific primers, and one of the three positive clones was sequenced by using single-molecule real-time (SMRT) sequencing technology. More than 1.95 Gb sequence data (~105× coverage) for the sequenced clone were generated. The junction reads mapped to the boundaries of T-DNA, and the flanking sequences in the transgenic line were identified by comparing all sequencing reads with the maize reference genome and the sequence of the transgenic vector. Furthermore, the putative insertion loci and flanking sequences were confirmed by PCR amplification and Sanger sequencing. The results indicated that two copies of the exogenous T-DNA fragments were inserted at the same genomic site, and the exogenous T-DNA fragments were integrated at the position of Chromosome 5 from 177155650 to 177155696 in the transgenic line 382. In this study, we demonstrated the successful application of the SMRT technology for the characterization of genomic insertion and flanking sequences.

The Position and Complex Genomic Architecture of Plant T-DNA Insertions Revealed by 4SEE

The integration of T-DNA in plant genomes is widely used for basic research and agriculture. The high heterogeneity in the number of integration events per genome, their configuration, and their impact on genome integrity highlight the critical need to detect the genomic locations of T-DNA insertions and their associated chromosomal rearrangements, and the great challenge in doing so. Here, we present 4SEE, a circular chromosome conformation capture (4C)-based method for robust, rapid, and cost-efficient detection of the entire scope of T-DNA locations. Moreover, by measuring the chromosomal architecture of the plant genome flanking the T-DNA insertions, 4SEE outlines their associated complex chromosomal aberrations. Applying 4SEE to a collection of confirmed T-DNA lines revealed previously unmapped T-DNA insertions and chromosomal rearrangements such as inversions and translocations. Uncovering such events in a feasible, robust, and cost-effective manner by 4SEE in any plant of interest has implications for accurate annotation and phenotypic characterization of T-DNA insertion mutants and transgene expression in basic science applications as well as for plant biotechnology.

Cyclic Digestion and Ligation-Mediated PCR Used for Flanking Sequence Walking

Ligation-mediated PCR (LM-PCR) is a classical method for isolating flanking sequences; however, it has a common limitation of reduced success rate owing to the circularization or multimerization of target restriction fragments including the known sequence. To address this limitation, we developed a novel LM-PCR method, termed Cyclic Digestion and Ligation-Mediated PCR (CDL-PCR). The novelty of this approach involves the design of new adapters that cannot be digested after being ligated with the restriction fragment, and cyclic digestion and ligation may be manipulated to block the circularization or multimerization of the target restriction fragments. Moreover, to improve the generality and flexibility of CDL-PCR, an adapter precursor sequence was designed, which could be digested to prepare 12 different adapters at low cost. Using this method, the flanking sequences of T-DNA insertions were obtained from transgenic rice and Arabidopsis thaliana. The experimental results demonstrated that CDL-PCR is an efficient and flexible method for identifying the flanking sequences in transgenic rice and Arabidopsis thaliana.

Palindromic sequence-targeted (PST) PCR: a rapid and efficient method for high-throughput gene characterization and genome walking

Genome walking (GW) refers to the capture and sequencing of unknown regions in a long DNA molecule that are adjacent to a region with a known sequence. A novel PCR-based method, palindromic sequence-targeted PCR (PST-PCR), was developed. PST-PCR is based on a distinctive design of walking primers and special thermal cycling conditions. The walking primers (PST primers) match palindromic sequences (PST sites) that are randomly distributed in natural DNA. The PST primers have palindromic sequences at their 3′-ends. Upstream of the palindromes there is a degenerate sequence (8–12 nucleotides long); defined adapters are present at the 5′-termini. The thermal cycling profile has a linear amplification phase and an exponential amplification phase differing in annealing temperature. Changing the annealing temperature to switch the amplification phases at a defined cycle controls the balance between sensitivity and specificity. In contrast to traditional genome walking methods, PST-PCR is rapid (two to three hours to produce GW fragments) as it uses only one or two PCR rounds. Using PST-PCR, previously unknown regions (the promoter and intron 1) of the VRN1 gene of Timothy-grass (Phleum pratense L.) were captured for sequencing. In our experience, PST-PCR had higher throughput and greater convenience in comparison to other GW methods.

Mapping of transgenic alleles in soybean using a nanopore-based sequencing strategy

Transgenic technology was developed to introduce transgenes into various organisms to validate gene function and add genetic variations >40 years ago. However, the identification of the transgene insertion position is still challenging in organisms with complex genomes. Here, we report a nanopore-based method to map the insertion position of a Ds transposable element originating in maize in the soybean genome. In this method, an oligo probe is used to capture the DNA fragments containing the Ds element from pooled DNA samples of transgenic soybean plants. The Ds element-enriched DNAs are then sequenced using the MinION-based platform of Nanopore. This method allowed us to rapidly map the Ds insertion positions in 51 transgenic soybean lines through a single sequencing run. This strategy is high throughput, convenient, reliable, and cost-efficient. The transgenic allele mapping protocol can be easily translated to other eukaryotes with complex genomes.

TDNAscan: A Software to Identify Complete and Truncated T-DNA Insertions

Transfer (T)-DNA insertions in mutants isolated from forward genetic screens are typically identified through thermal asymmetric interlaced polymerase chain reaction (TAIL-PCR), inverse PCR, or plasmid rescue. Despite the popularity and success of these methods, they have limited capabilities, particularly in situations in which the T-DNA is truncated. Here, we present a next generation sequencing (NGS)-based platform to facilitate the identification of complete and truncated T-DNA insertions. Our method enables the detection of the corresponding T-DNA insertion orientation and zygosity as well as insertion annotation. This method, called TDNAscan, was developed to be an open source software. We expect that TDNAscan will be a valuable addition to forward genetics toolkits because it provides a solution to the problem of causal gene identification, particularly genes disrupted by truncated T-DNA insertions. We present a case study in which TDNAscan was used to determine that the recessive Arabidopsis thaliana hypersensitive to latrunculin B (hlb3) mutant isolated in a forward genetic screen of T-DNA mutagenized plants encodes a class II FORMIN.

A Simple Genome Walking Strategy to Isolate Unknown Genomic Regions Using Long Primer and RAPD Primer

Background

Genome walking is a DNA-cloning methodology that is used to isolate unknown genomic regions adjacent to known sequences. However, the existing genome-walking methods have their own limitations.

Objectives

Our aim was to provide a simple and efficient genome-walking technology.

Material and Methods

In this paper, we developed a novel PCR strategy (termed SLRA PCR) that uses a single long primer (SLP), a set of gene specific primers (GSP), and a random amplified polymorphic DNA (RAPD) primer for genome walking. SLRA PCR consists of two processes: the first amplification using SLP, and three successive rounds of nested PCR amplified by GSP and RAPD primer. The novelty of the approach lies in the use of long primers (SLP and GSP) and same annealing and extension temperature 68℃ in combination. This method offers higher amplification efficiency, superior versatility, and greater simplicity compared with conventional randomly primed PCR methods for genome walking.

Results

The promoter regions and the first introns of the insulin-like androgenic gland hormone (IAG) gene and the hemocyanin gene of Macrobrachium nipponense were cloned using SLRA PCR, respectively.

Conclusions

This genome walking strategy can be applied to a wide range of genomes.

Stepwise partially overlapping primer-based PCR for genome walking

A stepwise partially overlapping primer-based PCR (SWPOP-PCR) method for isolating flanking unknown DNA regions was developed, which comprises three rounds of nested PCRs sequentially driven by SWPOP primer-nested specific primer pairs. SWPOP primer set is characterized by a partial overlap of 10 bp with 3′-part of the latter primer is identical to 5′-part of the former one, which makes the SWPOP primer in use anneal to SWPOP site of the prior PCR product only at relatively low temperature. For each PCR, target single-stranded DNA primed by the SWPOP primer in the exclusive one low-stringency cycle is converted into double-stranded form in the following high-stringency cycle due to the presence of a perfect annealing site for the specific primer. This double-stranded DNA bounded by the specific primer and the SWPOP primer is exponentially amplified in the remaining high-stringency cycles. Non-target single-stranded DNA, however, cannot be amplified given the lack of perfect complementary sequences for any primers. Therefore, the partial overlap of a SWPOP primer set preferentially synthesizes target products but inhibits nonspecific amplification. We successfully exploited SWPOP-PCR to obtain the DNA sequences flanking glutamate decarboxylase gene (gadA) locus in Lactobacillus brevis NCL912 and hygromycin gene (hyg) integrated in rice.

Identification of Genomic Insertion and Flanking Sequence of G2-EPSPS and GAT Transgenes in Soybean Using Whole Genome Sequencing Method

Molecular characterization of sequence flanking exogenous fragment insertion is essential for safety assessment and labeling of genetically modified organism (GMO). In this study, the T-DNA insertion sites and flanking sequences were identified in two newly developed transgenic glyphosate-tolerant soybeans GE-J16 and ZH10-6 based on whole genome sequencing (WGS) method. More than 22.4 Gb sequence data (∼21 × coverage) for each line was generated on Illumina HiSeq 2500 platform. The junction reads mapped to boundaries of T-DNA and flanking sequences in these two events were identified by comparing all sequencing reads with soybean reference genome and sequence of transgenic vector. The putative insertion loci and flanking sequences were further confirmed by PCR amplification, Sanger sequencing, and co-segregation analysis. All these analyses supported that exogenous T-DNA fragments were integrated in positions of Chr19: 50543767-50543792 and Chr17: 7980527-7980541 in these two transgenic lines. Identification of genomic insertion sites of G2-EPSPS and GAT transgenes will facilitate the utilization of their glyphosate-tolerant traits in soybean breeding program. These results also demonstrated that WGS was a cost-effective and rapid method for identifying sites of T-DNA insertions and flanking sequences in soybean.

Current and new approaches in GMO detection: challenges and solutions

In many countries, genetically modified organisms (GMO) legislations have been established in order to guarantee the traceability of food/feed products on the market and to protect the consumer freedom of choice. Therefore, several GMO detection strategies, mainly based on DNA, have been developed to implement these legislations. Due to its numerous advantages, the quantitative PCR (qPCR) is the method of choice for the enforcement laboratories in GMO routine analysis. However, given the increasing number and diversity of GMO developed and put on the market around the world, some technical hurdles could be encountered with the qPCR technology, mainly owing to its inherent properties. To address these challenges, alternative GMO detection methods have been developed, allowing faster detections of single GM target (e.g., loop-mediated isothermal amplification), simultaneous detections of multiple GM targets (e.g., PCR capillary gel electrophoresis, microarray, and Luminex), more accurate quantification of GM targets (e.g., digital PCR), or characterization of partially known (e.g., DNA walking and Next Generation Sequencing (NGS)) or unknown (e.g., NGS) GMO. The benefits and drawbacks of these methods are discussed in this review.

High-Throughput Analysis of T-DNA Location and Structure Using Sequence Capture

Agrobacterium-mediated transformation of plants with T-DNA is used both to introduce transgenes and for mutagenesis. Conventional approaches used to identify the genomic location and the structure of the inserted T-DNA are laborious and high-throughput methods using next-generation sequencing are being developed to address these problems. Here, we present a cost-effective approach that uses sequence capture targeted to the T-DNA borders to select genomic DNA fragments containing T-DNA—genome junctions, followed by Illumina sequencing to determine the location and junction structure of T-DNA insertions. Multiple probes can be mixed so that transgenic lines transformed with different T-DNA types can be processed simultaneously, using a simple, index-based pooling approach. We also developed a simple bioinformatic tool to find sequence read pairs that span the junction between the genome and T-DNA or any foreign DNA. We analyzed 29 transgenic lines of Arabidopsis thaliana, each containing inserts from 4 different T-DNA vectors. We determined the location of T-DNA insertions in 22 lines, 4 of which carried multiple insertion sites. Additionally, our analysis uncovered a high frequency of unconventional and complex T-DNA insertions, highlighting the needs for high-throughput methods for T-DNA localization and structural characterization. Transgene insertion events have to be fully characterized prior to use as commercial products. Our method greatly facilitates the first step of this characterization of transgenic plants by providing an efficient screen for the selection of promising lines.

Identification of genes that may regulate the expression of the transcription factor production of anthocyanin pigment 1 (PAP1)/MYB75 involved in Arabidopsis anthocyanin biosynthesis

A putative RNA-binding protein with a single RNA Recognition Motif (At3G63450) is involved in anthocyanin biosynthesis via its ability to modulate the transcript level of a major positive regulator PAP1 in Arabidopsis. The R2R3 MYB-activator production of anthocyanin pigment 1 (PAP1)/MYB75 plays a major role in anthocyanin biosynthesis in Arabidopsis in combination with one of three bHLH activators including transparent test 8 (TT8), enhancer of glabra3 (EGL3), glabra3 (GL3), and the WD-repeat transcription factor transparent testa 1 (TTG1), forming ternary MYB-basic HLH-WD40 complexes. Transcriptional activation of PAP1 expression is largely triggered by changes in light color and intensity, temperature fluctuations, nutrient status, and sugar and hormone treatments. However, the immediate upstream and downstream regulatory factors for PAP1 transcription are largely unknown. In the present study, using a T-DNA insertional mutagenesis approach, we transformed pap1-Dominant (pap1D) plants to modulate the levels of endogenous PAP1 transcripts. We employed Restriction Site Extension (RSE)-PCR analysis of 247 homogenous T3 genetic mutant lines exhibiting variations in anthocyanin accumulation compared to pap1D and identified 92 lines with T-DNA integrated in either intra- or inter-genic locations. This analysis revealed 80 novel candidate proteins, including a putative RNA-binding protein with a single RNA Recognition Motif (At3G63450), which may directly or indirectly regulate PAP1 expression at the transcriptional level.

Identification of genes that may regulate the expression of the transcription factor production of anthocyanin pigment 1 (PAP1)/MYB75 involved in Arabidopsis anthocyanin biosynthesis

A putative RNA-binding protein with a single RNA Recognition Motif (At3G63450) is involved in anthocyanin biosynthesis via its ability to modulate the transcript level of a major positive regulator PAP1 in Arabidopsis. The R2R3 MYB-activator production of anthocyanin pigment 1 (PAP1)/MYB75 plays a major role in anthocyanin biosynthesis in Arabidopsis in combination with one of three bHLH activators including transparent test 8 (TT8), enhancer of glabra3 (EGL3), glabra3 (GL3), and the WD-repeat transcription factor transparent testa 1 (TTG1), forming ternary MYB-basic HLH-WD40 complexes. Transcriptional activation of PAP1 expression is largely triggered by changes in light color and intensity, temperature fluctuations, nutrient status, and sugar and hormone treatments. However, the immediate upstream and downstream regulatory factors for PAP1 transcription are largely unknown. In the present study, using a T-DNA insertional mutagenesis approach, we transformed pap1-Dominant (pap1D) plants to modulate the levels of endogenous PAP1 transcripts. We employed Restriction Site Extension (RSE)-PCR analysis of 247 homogenous T3 genetic mutant lines exhibiting variations in anthocyanin accumulation compared to pap1D and identified 92 lines with T-DNA integrated in either intra- or inter-genic locations. This analysis revealed 80 novel candidate proteins, including a putative RNA-binding protein with a single RNA Recognition Motif (At3G63450), which may directly or indirectly regulate PAP1 expression at the transcriptional level.

Partially overlapping primer-based PCR for genome walking

Current genome walking methods are cumbersome to perform and can result in non-specific products. Here, we demonstrate the use of partially overlapping primer-based PCR (POP-PCR), a direct genome walking technique for the isolation of unknown flanking regions. This method exploits the partially overlapping characteristic at the 3’ ends of a set of POP primers (walking primers), which guarantees that the POP primer only anneals to the POP site of the preceding PCR product at relatively low temperatures. POP primer adaptation priming at the genomic DNA/POP site occurs only once due to one low-/reduced-stringency cycle in each nested PCR, resulting in the synthesis of a pool of single-stranded DNA molecules. Of this pool, the target single-stranded DNA is replicated to the double-stranded form bound by the specific primer and the POP primer in the subsequent high-stringency cycle due to the presence of the specific primer-binding site. The non-target single stranded DNA does not become double stranded due to the absence of a binding site for any of the primers. Therefore, the POP-PCR enriches target DNA while suppressing non-target products. We successfully used POP-PCR to retrieve flanking regions bordering the gadA locus in Lactobacillus brevis NCL912, malQ in Pichia pastoris GS115, the human aldolase A gene, and hyg in rice.

Next-generation genome sequencing can be used to rapidly characterise sequences flanking T-DNA insertions in random insertional mutants of Leptosphaeria maculans

Background

Banks of mutants with random insertions of T-DNA from Agrobacterium tumefaciens are often used in forward genetics approaches to identify phenotypes of interest. Upon identification of mutants of interest, the flanking sequences of the inserted T-DNA must be identified so that the mutated gene can be characterised. However, for many fungi, this task is not trivial as widely used PCR-based methods such as thermal asymmetric interlaced polymerase chain reaction (TAIL-PCR) are not successful.

Findings

Next-generation Illumina sequencing was used to locate T-DNA insertion sites in four mutants of Leptosphaeria maculans, a fungal plant pathogen. Sequence reads of up to 150 bp and coverage ranging from 6 to 24 times, were sufficient for identification of insertion sites in all mutants. All T-DNA border sequences were truncated to different extents. Additionally, next-generation sequencing revealed chromosomal rearrangements associated with the insertion in one of the mutants.

Conclusions

Next-generation sequencing is a cost-effective and rapid method of identifying sites of T-DNA insertions, and associated genomic rearrangements in Leptosphaeria maculans and potentially in other fungal species.

Genome walking

Genome walking is a method for determining the DNA sequence of unknown genomic regions flanking a region of known DNA sequence. The Genome walking has the potential to capture 6-7 kb of sequence in a single round. Ideal for identifying gene promoter regions where only the coding region. Genome walking also has significant utility for capturing homologous genes in new species when there are areas in the target gene with strong sequence conservation to the characterized species. The increasing use of next-generation sequencing technologies will see the principles of genome walking adapted to in silico methods. However, for smaller projects, PCR-based genome walking will remain an efficient method of characterizing unknown flanking sequence.

Development and validation of a multiplex PCR assay for identification of the epidemic ST-258/512 KPC-producing Klebsiella pneumoniae clone

The Klebsiella pneumoniae carbapenemase-producing Klebsiella pneumoniae (KPC-KP) sequence type (ST)-258/512 clone is the dominant clone by which KPC has disseminated worldwide. Standard typing methods are time-consuming and are therefore impractical for identification of this clone in the course of an outbreak. Through comparative genomic study, we have previously identified several presumably unique genes of this clone: 1) PILV-like protein (pilv-l), 2) transposase, IS66-family (is-66), and a 3) phage-related protein (prp). Our aims were to 1) test for the presence of these genes using a multiplex PCR in a large, multinational collection of KPC-KP isolates and to 2) validate this assay as a typing method for the identification of the ST-258/512 clone. KPC-KP isolates (n=160) that included both ST-258/512 (group A, n=114) and non-ST-258 (group B, n=46) strains were collected from the following countries: Greece, 20; Israel, 93; Italy, 19; USA, 25; and Colombia, 3. Group B included 30 different STs from various lineages. The pilv-l gene was present in 111/114 of ST-258 isolates, including all of the KPC-negative isolates resulting in a sensitivity of 97%. Using primers for a unique ST-258 pilv-l allele resulted in a specificity of 100%. The sensitivity values of is-66 and prp genes for detecting KPC-KP ST-258 were 83 and 89%, respectively, and the specificity values were 67 and 93%, respectively. PCR for the unique pilv-l ST-258 allele provides a reliable tool for rapid detection of the ST-258 clone. This method can be helpful both in the setting of an outbreak and in a large-scale survey of KPC-KP strains.

Time- and cost-efficient identification of T-DNA insertion sites through targeted genomic sequencing

Forward genetic screens enable the unbiased identification of genes involved in biological processes. In Arabidopsis, several mutant collections are publicly available, which greatly facilitates such practice. Most of these collections were generated by agrotransformation of a T-DNA at random sites in the plant genome. However, precise mapping of T-DNA insertion sites in mutants isolated from such screens is a laborious and time-consuming task. Here we report a simple, low-cost and time efficient approach to precisely map T-DNA insertions simultaneously in many different mutants. By combining sequence capture, next-generation sequencing and 2D-PCR pooling, we developed a new method that allowed the rapid localization of T-DNA insertion sites in 55 out of 64 mutant plants isolated in a screen for gyrase inhibition hypersensitivity.

Characterization of an Ac transposon system based on apt1-m1 (Ac) on the long arm of maize chromosome 9

Activator/Dissociation (Ac/Ds) transposable elements have been used in maize insertional mutagenesis as a complement to Mutator (Mu). In this study, to further improve the efficiency of the Ac/Ds mutagenesis system, we adopted apt1-m1 (Ac) on the long arm of chromosome 9 (9L) as a donor Ac to create an Ac insertion library. This system is based on the negative selection pressure against the donor Ac, and it was highly efficient for isolating new transposition events. We obtained 9,625 transposition events from 1083 F1 ears with an average transposition rate of 8.66 % (rates ranged from 1.11 to 29.73 %). We also adopted a modified PCR-based genome walking strategy to improve the efficiency of the new method for isolating transposon-flanking sequences. This method is more efficient than the Southern-based method that was used in previous studies. A validation step was developed to distinguish transposon tags derived from newly transposed Ac or Ds elements. Using this PCR-based method, we isolated 67 inheritable flanking sequences from the apt1-m1 (Ac) transposition library; of these, 51 were confirmed as tr-Ac-flanking sequences and 11 were tr-Ds-flanking sequences. Similar to other Ac donors from different loci, the apt1-m1 (Ac) system also exhibited a preference for short distance transposition. In this study, we have further improved the Ac mutagenesis system in maize for gene isolation and functional genomics studies.

Revised selection criteria for candidate restriction enzymes in genome walking

A new method to improve the efficiency of flanking sequence identification by genome walking was developed based on an expanded, sequential list of criteria for selecting candidate enzymes, plus several other optimization steps. These criteria include: step (1) initially choosing the most appropriate restriction enzyme according to the average fragment size produced by each enzyme determined using in silico digestion of genomic DNA, step (2) evaluating the in silico frequency of fragment size distribution between individual chromosomes, step (3) selecting those enzymes that generate fragments with the majority between 100 bp and 3,000 bp, step (4) weighing the advantages and disadvantages of blunt-end sites vs. cohesive-end sites, step (5) elimination of methylation sensitive enzymes with methylation-insensitive isoschizomers, and step (6) elimination of enzymes with recognition sites within the binary vector sequence (T-DNA and plasmid backbone). Step (7) includes the selection of a second restriction enzyme with highest number of recognition sites within regions not covered by the first restriction enzyme. Step (8) considers primer and adapter sequence optimization, selecting the best adapter-primer pairs according to their hairpin/dimers and secondary structure. In step (9), the efficiency of genomic library development was improved by column-filtration of digested DNA to remove restriction enzyme and phosphatase enzyme, and most important, to remove small genomic fragments (<100 bp) lacking the T-DNA insertion, hence improving the chance of ligation between adapters and fragments harbouring a T-DNA. Two enzymes, NsiI and NdeI, fit these criteria for the Arabidopsis thaliana genome. Their efficiency was assessed using 54 T₃ lines from an Arabidopsis SK enhancer population. Over 70% success rate was achieved in amplifying the flanking sequences of these lines. This strategy was also tested with Brachypodium distachyon to demonstrate its applicability to other larger genomes.

An A-T linker adapter polymerase chain reaction method for chromosome walking without restriction site cloning bias

A-T linker adapter polymerase chain reaction (PCR) was modified and employed for the isolation of genomic fragments adjacent to a known DNA sequence. The improvements in the method focus on two points. The first is the modification of the PO(4) and NH(2) groups in the adapter to inhibit the self-ligation of the adapter or the generation of nonspecific products. The second improvement is the use of the capacity of rTaq DNA polymerase to add an adenosine overhang at the 3' ends of digested DNA to suppress self-ligation in the digested DNA and simultaneously resolve restriction site clone bias. The combination of modifications in the adapter and in the digested DNA leads to T/A-specific ligation, which enhances the flexibility of this method and makes it feasible to use many different restriction enzymes with a single adapter. This novel A-T linker adapter PCR overcomes the inherent limitations of the original ligation-mediated PCR method such as low specificity and a lack of restriction enzyme choice. Moreover, this method also offers higher amplification efficiency, greater flexibility, and easier manipulation compared with other PCR methods for chromosome walking. Experimental results from 143 Arabidopsis mutants illustrate that this method is reliable and efficient in high-throughput experiments.

Fusion primer and nested integrated PCR (FPNI-PCR): a new high-efficiency strategy for rapid chromosome walking or flanking sequence cloning

Background

The advent of genomics-based technologies has revolutionized many fields of biological enquiry. However, chromosome walking or flanking sequence cloning is still a necessary and important procedure to determining gene structure. Such methods are used to identify T-DNA insertion sites and so are especially relevant for organisms where large T-DNA insertion libraries have been created, such as rice and Arabidopsis. The currently available methods for flanking sequence cloning, including the popular TAIL-PCR technique, are relatively laborious and slow.

Results

Here, we report a simple and effective fusion primer and nested integrated PCR method (FPNI-PCR) for the identification and cloning of unknown genomic regions flanked known sequences. In brief, a set of universal primers was designed that consisted of various 15-16 base arbitrary degenerate oligonucleotides. These arbitrary degenerate primers were fused to the 3' end of an adaptor oligonucleotide which provided a known sequence without degenerate nucleotides, thereby forming the fusion primers (FPs). These fusion primers are employed in the first step of an integrated nested PCR strategy which defines the overall FPNI-PCR protocol. In order to demonstrate the efficacy of this novel strategy, we have successfully used it to isolate multiple genomic sequences namely, 21 orthologs of genes in various species of Rosaceace, 4 MYB genes of Rosa rugosa, 3 promoters of transcription factors of Petunia hybrida, and 4 flanking sequences of T-DNA insertion sites in transgenic tobacco lines and 6 specific genes from sequenced genome of rice and Arabidopsis.

Conclusions

The successful amplification of target products through FPNI-PCR verified that this novel strategy is an effective, low cost and simple procedure. Furthermore, FPNI-PCR represents a more sensitive, rapid and accurate technique than the established TAIL-PCR and hiTAIL-PCR procedures.

Genome walking in eukaryotes

Genome walking is a molecular procedure for the direct identification of nucleotide sequences from purified genomes. The only requirement is the availability of a known nucleotide sequence from which to start. Several genome walking methods have been developed in the last 20 years, with continuous improvements added to the first basic strategies, including the recent coupling with next generation sequencing technologies. This review focuses on the use of genome walking strategies in several aspects of the study of eukaryotic genomes. In a first part, the analysis of the numerous strategies available is reported. The technical aspects involved in genome walking are particularly intriguing, also because they represent the synthesis of the talent, the fantasy and the intelligence of several scientists. Applications in which genome walking can be employed are systematically examined in the second part of the review, showing the large potentiality of this technique, including not only the simple identification of nucleotide sequences but also the analysis of large collections of mutants obtained from the insertion of DNA of viral origin, transposons and transfer DNA (T-DNA) constructs. The enormous amount of data obtained indicates that genome walking, with its large range of applicability, multiplicity of strategies and recent developments, will continue to have much to offer for the rapid identification of unknown sequences in several fields of genomic research.

An affinity-based genome walking method to find transgene integration loci in transgenic genome

Identifying a good transgenic event from the pool of putative transgenics is crucial for further characterization. In transgenic plants, the transgene can integrate in either single or multiple locations by disrupting the endogenes and/or in heterochromatin regions causing the positional effect. Apart from this, to protect the unauthorized use of transgenic plants, the signature of transgene integration for every commercial transgenic event needs to be characterized. Here we show an affinity-based genome walking method, named locus-finding (LF) PCR (polymerase chain reaction), to determine the transgene flanking sequences of rice plants transformed by Agrobacterium tumefaciens. LF PCR includes a primary PCR by a degenerated primer and transfer DNA (T-DNA)-specific primer, a nested PCR, and a method of enriching the desired amplicons by using a biotin-tagged primer that is complementary to the T-DNA. This enrichment technique separates the single strands of desired amplicons from the off-target amplicons, reducing the template complexity by several orders of magnitude. We analyzed eight transgenic rice plants and found the transgene integration loci in three different chromosomes. The characteristic illegitimate recombination of the Agrobacterium sp. was also observed from the sequenced integration loci. We believe that the LF PCR should be an indispensable technique in transgenic analysis.