Poly(m-phenylenediamine) nanospheres and nanorods: selective synthesis and their application for multiplex nucleic acid detection

Antimicrobial nanocomposite adsorbent based on poly(meta-phenylenediamine) for remediation of lead (II) from water medium

In this study, poly(m-phenylenediamine)@ZnO (PmPDA@ZnO) nanocomposite was fabricated by in-situ chemical oxidative polymerization for the effective lead(II) removal from aqueous solutions. PmPDA@ZnO was characterized by several instrumental methods like FTIR, XRD, EDX, TGA, FESEM, TEM, zeta potential, and BET. The TEM images showed a core-shell-like structure for the PmPDA@ZnO nanocomposite. TGA results showed that the thermal stability of the PmPDA@ZnO nanocomposite was higher than the PmPDA. The maximum adsorption of lead (II) onto PmPDA@ZnO nanocomposite was obtained at pH 6, adsorbent dosage 60 mg, lead(II) ion concentration 90 mg/L, and agitation time 90 min. Langmuir and Freundlich's isotherm models were evaluated to simulate the lead(II) sorption via empirical data. Langmuir's model was in good agreement with empirical data with a maximum adsorption capacity (Qmax) of 77.51 mg/g. The kinetic data adsorption fitted best the pseudo-second-order model. The values of thermodynamic parameters of ΔS° and ΔH° were obtained 0.272 J/mol K, and 71.35 kJ/mol, respectively. The spontaneous and endothermic behavior of the adsorption process was confirmed by the negative and positive response of ΔG° and ΔH°, respectively. Moreover, the addition of coexisting cations e.g. cobalt (II), nickel (II), calcium (II), and copper (II) had no significant effect on the removal efficiency of lead(II). Adsorption-desorption studies showed that the PmPDA@ZnO nanocomposite can be remarkably regenerated and reused after three sequential runs without a significant decline in its adsorption performance. The antimicrobial activities of PmPDA@ZnO nanocomposite were evaluated against Escherichia coli and Staphylococcus aureus bacteria species. These results confirmed that the PmPDA@ZnO nanocomposite could be a good candidate for water decontamination.

Electroconductive and photoactive poly(phenylenediamine)s with antioxidant and antimicrobial activities for potential photothermal therapy

In recent years, polyaniline derivatives such as poly(phenylenediamine)s have attracted the attention of researchers due to their better solubility, good optical and electrical properties. In the current work, poly(ortho- phenylenediamine)...

Ordered mesoporous carbon assisted Fe-N-C for efficient oxygen reduction catalysis in both acidic and alkaline media

Fe-N-C catalyst obtained by high temperature pyrolysis is one of the most promising electrocatalysts for non-precious metal oxygen reduction reaction (ORR). However, up to now, the lesser density of active sites results in a substantial performance gap between the Fe-N-C materials and the conventional Pt/C ORR catalysts. Herein, an N-doped mesoporous carbon is employed as the support for the dispersion of poly-m-phenylenediamine. With high specific surface areas of 1526 m² g^-1, the as-prepared Fe-N-C materials show the half-wave potential of 0.89 V and 0.79 V in 0.1 M KOH and 0.5 M H₂SO₄, respectively. Notably, the superior methanol tolerance, as well as excellent stability, makes our Fe-N-C materials as competitive candidates for oxygen electrochemical catalysis.

Development of a near infrared novel bioimaging agent via co-oligomerization of Congo red with aniline and o-phenylenediamine: experimental and theoretical studies

With a view to study the effect of insertion of a multifunctional dye moiety on the photo physical properties of conducting polymers, the present paper reports for the first time the homopolymerization and co-oligomerization of Congo red (CR) dye with aniline and o-phenylenediamine. The co-oligomerization was established by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (1H-NMR), and ultraviolet-visible (UV-vis) spectroscopy while the morphology was examined using X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The theoretical as well as experimental data of 1H-NMR as well as IR studies confirmed the co-oligomer formation while ultraviolet-visible spectroscopy studies revealed a dynamic change in the optical properties upon variation of co-oligomer composition. X-ray diffraction studies established a crystalline morphology of oligomers. Live cell confocal imaging studies revealed that the co-oligomers could be effectively used in NIR imaging.

Fluorescence Turn-On, Specific Detection of Cystine in Human Blood Plasma and Urine Samples by Nitrogen-Doped Carbon Quantum Dots

Determination of cystine in blood and urine is very important to monitor and maintain the bio metabolism, immune systems, and prevent the tissue/DNA damage from free radicals, diagnosis of cystinuria disease, cancer, and related autoimmune diseases. Among the various detection methods, fluorometric detection is simple, rapid, and sensitive to cystine using nontoxic, inexpensive, highly fluorescent, stable carbon quantum dots (CQDs). The CQDs are prepared from p-phenylenediamine by the hydrothermal method to get the inherent optical features of pH-dependent and excitation wavelength-independent fluorescence emission along with high aqueous stability due to pre-eminent nitrogen content. The red emission of CQDs originates from the intrinsic core that is associated with photoinduced electron transfer (PET). The turn-on fluorescence observed in presence of cystine is due to decrease in the PET by oxidation of CQDs. On the basis of this observation, we have developed an assay for the determination of cystine with a concentration range of 10 nM to 10 μM and the limit of detection is 0.4 nM. Additionally, our assay shows good recoveries (93-105%) for the spiked blood plasma and urine samples using the standard addition method.

Controllable synthesis of carbon nanosheets derived from oxidative polymerisation of m-phenylenediamine

Synthesis of high-quality carbon nanosheets with superior physicochemical properties is of particular importance for environmental and catalytic applications. In this research, carbon nanosheets with tunable porosity were successfully synthesized using two-dimensional (2D) poly(m-phenylenediamine) (PmPD) as precursor. The flat polymer precursor was acquired by oxidative polymerisation of m-phenylenediamine coupled with iron ions coordination, which confined an anisotropic growth of polymer within the 2D directions. Moreover, the addition of H₂O after the polymerisation is able to indirectly regulate the porosity of the carbon nanosheets. The carbon nanosheets with controllable porosity realize comparable electrocatalytic activity for oxygen reduction reaction as compared with commercial Pt/C, indicative of great potential to serve as noble metals candidates in the application of zinc/air batteries.

Fe-nitrilotriacetic acid coordination polymer nanowires: an effective sensing platform for fluorescence-enhanced nucleic acid detection

The determination of specific nucleic acid sequences is key in identifying disease-causing pathogens and genetic diseases. In this paper we report the utilization of Fe-nitrilotriacetic acid coordination polymer nanowires as an effective nanoquencher for fluorescence-enhanced nucleic acid detection. The detection is fast and the whole process can be completed within 15 min. This nanosensor shows a low detection limit of 0.2 nM with selectivity down to single-base mismatch. This work provides us with an attractive sensing platform for applications.

A Polyaniline-based Sensor of Nucleic Acids

Detection of nucleic acids is at the center of diagnostic technologies used in research and the clinic. Standard approaches used in these technologies rely on enzymatic modification that can introduce bias and artifacts. A critical element of next generation detection platforms will be direct molecular sensing, thereby avoiding a need for amplification or labels. Advanced nanomaterials may provide the suitable chemical modalities to realize label-free sensors. Conjugated polymers are ideal for biological sensing, possessing properties compatible with biomolecules and exhibit high sensitivity to localized environmental changes. In this article, a method is presented for detecting nucleic acids using the electroconductive polymer polyaniline. Simple DNA "probe" oligonucleotides complementary to target nucleic acids are attached electrostatically to the polymer, creating a sensor system that can differentiate single nucleotide differences in target molecules. Outside the specific and unbiased nature of this technology, it is highly cost effective.

Construction of Plasmonic Core-Satellite Nanostructures on Substrates Based on DNA-Directed Self-Assembly as a Sensitive and Reproducible Biosensor

We report the successful construction of plasmonic core-satellite nanostructured assemblies on two-dimensional substrates, based on a strategy of combining DNA-functionalized plasmonic nanoparticles (NPs) with the specific recognition ability toward target to enable satellite NPs to self-assemble around the core immobilized on substrates. A strongly coupled plasmonic resonance band was observed because of the close proximity between core and satellite NPs, which presented significant red-shift and enhanced extinction with respect to the local surface plasmon resonance (LSPR) band of individual core NPs on the substrate. The functionality of this core-satellite nanostructured assembly as a biosensor was further explored, and the changes in extinction intensity and the peak shift of the plasmonic coupling resonance band arising from the probe-target DNA binding event all proved to be useful criteria for target DNA detection. Moreover, high selectivity down to single-base mismatched DNA was achieved using this strongly coupled plasmonic core-satellite nanostructured assembly on a substrate. Such substrate-based detection was advantageous, and its reusability and high cycle stability were demonstrated after five cycles of disassembly and reassembly. Our work demonstrates the biosensing capacity of this DNA-functionalized plasmonic nanoassembly model system on two-dimensional substrate, which is also applicable to the detection of numerous DNA-recognized biomolecules. Likewise, the presented construction method can be extended to fabricate other compositional core-satellite nanoassemblies.

Utilizing Intrinsic Properties of Polyaniline to Detect Nucleic Acid Hybridization through UV-Enhanced Electrostatic Interaction

Detection of specific RNA or DNA molecules by hybridization to "probe" nucleic acids via complementary base-pairing is a powerful method for analysis of biological systems. Here we describe a strategy for transducing hybridization events through modulating intrinsic properties of the electroconductive polymer polyaniline (PANI). When DNA-based probes electrostatically interact with PANI, its fluorescence properties are increased, a phenomenon that can be enhanced by UV irradiation. Hybridization of target nucleic acids results in dissociation of probes causing PANI fluorescence to return to basal levels. By monitoring restoration of base PANI fluorescence as little as 10(-11) M (10 pM) of target oligonucleotides could be detected within 15 min of hybridization. Detection of complementary oligos was specific, with introduction of a single mismatch failing to form a target-probe duplex that would dissociate from PANI. Furthermore, this approach is robust and is capable of detecting specific RNAs in extracts from animals. This sensor system improves on previously reported strategies by transducing highly specific probe dissociation events through intrinsic properties of a conducting polymer without the need for additional labels.

Rectangular coordination polymer nanoplates: large-scale, rapid synthesis and their application as a fluorescent sensing platform for DNA detection

In this paper, we report on the large-scale, rapid synthesis of uniform rectangular coordination polymer nanoplates (RCPNs) assembled from Cu(II) and 4,4′-bipyridine for the first time. We further demonstrate that such RCPNs can be used as a very effective fluorescent sensing platform for multiple DNA detection with a detection limit as low as 30 pM and a high selectivity down to single-base mismatch. The DNA detection is accomplished by the following two steps: (1) RCPN binds dye-labeled single-stranded DNA (ssDNA) probe, which brings dye and RCPN into close proximity, leading to fluorescence quenching; (2) Specific hybridization of the probe with its target generates a double-stranded DNA (dsDNA) which detaches from RCPN, leading to fluorescence recovery. It suggests that this sensing system can well discriminate complementary and mismatched DNA sequences. The exact mechanism of fluorescence quenching involved is elucidated experimentally and its use in a human blood serum system is also demonstrated successfully.

Fluorescence resonance energy transfer dye-labeled probe for fluorescence-enhanced DNA detection: an effective strategy to greatly improve discrimination ability toward single-base mismatch

In this article, we report on the first use of fluorescence resonance energy transfer (FRET) dye-labeled probe for fluorescence resonance enhanced DNA detection to greatly improve discrimination ability toward single-base mismatch using conjugation polymer poly(p-phenylenediamine) nanobelts (PNs) as a sensing platform. The suggested FRET dye-labeled probe contains a 5-carboxyfluorescein (FAM) group at 5' end of the oligomer as a donor and a 6-carboxy-X-rhodamine (ROX) attached to a modified cytosine (C) base as an acceptor, which were separated by three bases. The general concept used in this DNA assay is based on adsorption of the FRET dye-labeled single-stranded DNA (ssDNA) probe by PN, which is accompanied by substantial fluorescence quenching and disappearance of FRET. The subsequent specific hybridization with its target forms a double-stranded DNA (dsDNA), resulting in desorption of the hybridized duplex from PN surface accompanied by reoccurrence of FRET and fluorescence recovery. It suggests that the discrimination ability of this FRET probe based system toward single-base mismatch is about 5.2 times that of the system based on single dye-labeled probe based system.