Single bout short duration fluid shear stress induces osteogenic differentiation of MC3T3-E1 cells via integrin β1 and BMP2 signaling cross-talk

Integrin α2β1 deficiency enhances osteogenesis via BMP-2 signaling for accelerated fracture repair

Previous studies have shown that the absence of the collagen-binding integrin α2β1 confers protection against osteoporosis, primarily by enhancing osteoblast-mediated matrix formation, with a particular increase in collagen type I production. This study aimed to elucidate the mechanism underlying this increased matrix production. Our findings demonstrate that osteoblasts lacking integrin α2 secrete a pro-osteogenic factor that activates both TGF-β and BMP signaling pathways. Among these, BMP-2 was identified as the key signaling protein responsible for this effect, as its expression was significantly upregulated during osteoblast differentiation. Moreover, integrin α2 deficiency led to earlier and elevated BMP-2 secretion at the cell surface during osteogenesis, which promoted accelerated osteoblast differentiation. This phenomenon likely contributes to enhanced matrix production in aging animals, providing a protective effect against osteoporosis. To explore the broader implications of this phenotype, we utilized a fracture healing model. In integrin α2-deficient 12 weeks old female mice, elevated serum levels of BMP-2 were detected during the early stages of fracture repair. This upregulation of BMP signaling within the fracture callus accelerated the healing process, resulting in faster formation and mineralization of the cartilaginous callus. Additionally, the elevated BMP-2 levels facilitated earlier differentiation of chondrocytic cells, evidenced by the premature appearance of collagen type II- and type X-positive cells during endochondral ossification. Despite the accelerated healing, the overall biomechanical integrity of the repaired fractures remained uncompromised. Thus, the modulation of integrin α2β1 presents a promising therapeutic target for enhancing fracture repair by regulating BMP-2 signaling in a physiologically relevant manner.

Temporal regulation of BMP2 growth factor signaling in response to mechanical loading is linked to cytoskeletal and focal adhesion remodeling

Biophysical cues have the ability to enhance cellular signaling response to Bone Morphogenetic Proteins, an essential growth factor during bone development and regeneration. Yet, therapeutic application of Bone Morphogenetic Protein 2 (BMP2) is restricted due to uncontrolled side effects. An understanding of the temporal characteristics of mechanically regulated signaling events and underlying mechanism is lacking. Using a 3D bioreactor system in combination with a soft macroporous biomaterial substrate, we mimic the in vivo environment that BMP2 is acting in. We show that the intensity and duration of BMP2 signaling increases with increasing loading frequency in synchrony with the number and size of focal adhesions. Long-term mechanical stimulation increases the expression of BMP receptor type 1B, specific integrin subtypes and integrin clustering. Together, this triggered a short-lived mechanical echo that enhanced BMP2 signaling even when BMP2 is administered directly after mechanical stimulation, but not when it is applied after a resting period of ≥30 min. Interfering with cytoskeletal remodeling hinders focal adhesion remodeling verifying its critical role in shifting cells into a state of high BMP2 responsiveness. The design of biomaterials that exploit this potential locally at the site of injury will help to overcome current limitations of clinical growth factor treatment.

Exploration of the miR-187-3p/CNR2 pathway in modulating osteoblast differentiation and treating postmenopausal osteoporosis through mechanical stress

This study aimed to explore how mechanical stress affects osteogenic differentiation via the miR-187-3p/CNR2 pathway. To conduct this study, 24 female C57BL/6 mice, aged 8 weeks, were used and divided into four groups. The Sham and OVX groups did not undergo treadmill exercise, while the Sham + EX and OVX + EX groups received a 8-week treadmill exercise. Post-training, bone marrow and fresh femur samples were collected for further analysis. Molecular biology analysis, histomorphology analysis, and micro-CT analysis were conducted on these samples. Moreover, primary osteoblasts were cultured under osteogenic conditions and divided into GM group and CTS group. The cells in the CTS group underwent a sinusoidal stretching regimen for either 3 or 7 days. The expression of early osteoblast markers (Runx2, OPN, and ALP) was measured to assess differentiation. The study findings revealed that mechanical stress has a regulatory impact on osteoblast differentiation. The expression of miR-187-3p was observed to decrease, facilitating osteogenic differentiation, while the expression of CNR2 increased significantly. These observations suggest that mechanical stress, miR-187-3p, and CNR2 play crucial roles in regulating osteogenic differentiation. Both in vivo and in vitro experiments have confirmed that mechanical stress downregulates miR-187-3p and upregulates CNR2, which leads to the restoration of distal femoral bone mass and enhancement of osteoblast differentiation. Therefore, mechanical stress promotes osteoblasts, resulting in improved osteoporosis through the miR-187-3p/CNR2 signaling pathway. These findings have broad prospect and provide molecular biology guidance for the basic research and clinical application of exercise in the prevention and treatment of PMOP.

Zinc finger protein 36 like 2-histone deacetylase 1 axis is involved in the bone responses to mechanical stress

The molecular mechanism underlying the promotion of fracture healing by mechanical stimuli remains unclear. The present study aimed to investigate the role of zinc finger protein 36 like 2 (ZFP36L2)-histone deacetylase 1 (HDAC1) axis on the osteogenic responses to moderate mechanical stimulation. Appropriate stimulation of fluid shear stress (FSS) was performed on MC3T3-E1 cells transduced with ZFP36L2 and HDAC1 recombinant adenoviruses, aiming to validate the influence of mechanical stress on the expression of ZFP36L2-HDAC1 and the osteogenic differentiation and mineralization. The results showed that moderate FSS stimulation significantly upregulated the expression of ZFP36L2 in MC3T3-E1 cells (p < 0.01). The overexpression of ZFP36L1 markedly enhanced the levels of osteogenic differentiation markers, including bone morphogenetic protein 2 (BMP2), runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), Osterix, and collagen type I alpha 1 (COL1A1) (p < 0.01). ZFP36L2 accelerated the degradation of HDAC1 by specifically binding to its 3' UTR region, thereby fulfilling its function at the post-transcriptional regulatory gene level and promoting the osteogenic differentiation and mineralization fate of cells. Mechanical unloading notably diminished/elevated the expression of ZFP36L2/HDAC1, decreased bone mineral density and bone volume fraction, hindered the release of osteogenic-related factors and vascular endothelial growth factor in callus tissue (p < 0.01), and was detrimental to fracture healing. Collectively, proper stress stimulation plays a crucial role in facilitating osteogenesis through the promotion of ZFP36L2 and subsequent degradation of HDAC1. Targeting ZFP36L2-HDAC1 axis may provide promising insights to enhance bone defect healing.

Intermittent actuation attenuates fibrotic behaviour of myofibroblasts

The foreign body response (FBR) to implanted materials culminates in the deposition of a hypo-permeable, collagen rich fibrotic capsule by myofibroblast cells at the implant site. The fibrotic capsule can be deleterious to the function of some medical implants as it can isolate the implant from the host environment. Modulation of fibrotic capsule formation has been achieved using intermittent actuation of drug delivery implants, however the mechanisms underlying this response are not well understood. Here, we use analytical, computational, and in vitro models to understand the response of human myofibroblasts (WPMY-1 stromal cell line) to intermittent actuation using soft robotics and investigate how actuation can alter the secretion of collagen and pro/anti-inflammatory cytokines by these cells. Our findings suggest that there is a mechanical loading threshold that can modulate the fibrotic behaviour of myofibroblasts, by reducing the secretion of soluble collagen, transforming growth factor beta-1 and interleukin 1-beta, and upregulating the anti-inflammatory interleukin-10. By improving our understanding of how cells involved in the FBR respond to mechanical actuation, we can harness this technology to improve functional outcomes for a wide range of implanted medical device applications including drug delivery and cell encapsulation platforms. STATEMENT OF SIGNIFICANCE: A major barrier to the successful clinical translation of many implantable medical devices is the foreign body response (FBR) and resultant deposition of a hypo-permeable fibrotic capsule (FC) around the implant. Perturbation of the implant site using intermittent actuation (IA) of soft-robotic implants has previously been shown to modulate the FBR and reduce FC thickness. However, the mechanisms of action underlying this response were largely unknown. Here, we investigate how IA can alter the activity of myofibroblast cells, and ultimately suggest that there is a mechanical loading threshold within which their fibrotic behaviour can be modulated. These findings can be harnessed to improve functional outcomes for a wide range of medical implants, particularly drug delivery and cell encapsulation devices.

Microfluidic device for enhancement and analysis of osteoblast differentiation in three-dimensional cell cultures

Three-dimensional (3D) cell cultures are to date the gold standard in biomedical research fields due to their enhanced biological functions compared to conventional two-dimensional (2D) cultures. 3D cell spheroids, as well as organoids, are better suited to replicate tissue functions, which enables their use both as in vitro models for basic research and toxicology, as well as building blocks used in tissue/organ biofabrication approaches. Culturing 3D spheroids from bone-derived cells is an emerging technology for both disease modelling and drug screening applications. Bone tissue models are mainly limited by the implementation of sophisticated devices and procedures that can foster a tissue-specific 3D cell microenvironment along with a dynamic cultivation regime. In this study, we consequently developed, optimized and characterized an advanced perfused microfluidic platform to improve the reliability of 3D bone cell cultivation and to enhance aspects of bone tissue maturation in vitro. Moreover, biomechanical stimulation generated by fluid flow inside the arrayed chamber, was used to mimic a more dynamic cell environment emulating a highly vascularized bone we expected to improve the osteogenic 3D microenvironment in the developed multifunctional spheroid-array platform. The optimized 3D cell culture protocols in our murine bone-on-a-chip spheroid model exhibited increased mineralization and viability compared to static conditions. As a proof-of-concept, we successfully confirmed on the beneficial effects of a dynamic culture environment on osteogenesis and used our platform for analysis of bone-derived spheroids produced from primary human pre-osteoblasts. To conclude, the newly developed system represents a powerful tool for studying human bone patho/physiology in vitro under more relevant and dynamic culture conditions converging the advantages of microfluidic platforms with multi-spheroid array technologies.

Nutritional properties and osteogenic activity of simulated digestion components and peptides from Larimichthys crocea

Fish provides a range of health benefits due to its nutritional and bioactive components. However, the bioactive peptides derived from Larimichthys crocea proteins were not fully investigated, especially the beneficial effects related to bone growth in vitro. In this study, the water extract protein was subjected to the simulated in vitro digestion process, and the osteogenic effect of enzymatic hydrolysate at different digestion stages was evaluated by the proliferation of osteoblast. The protein hydrolyzates of group pepsin treatment for 1 h and pepsin treatment for 2 h showed higher osteogenic activity in vitro. Two peptides including IERGDVVVQDSPSD from pepsin treatment for 1 h and RGDLGIEIPTEK from pepsin treatment for 2 h were identified, which revealed eminent effects in terms of promoting osteoblast proliferation and enhancing ALP activity. Moreover, the available nutrients in the proteins were determined by the molecular weight distribution and free amino acid composition. Those peptides also showed stronger interaction with RGD than integrins. Therefore, the peptides from Larimichthys crocea can be used as an effective ingredient for promoting bone growth in the future.

Effect of bone morphogenic protein-2 and desferoxamine on distraction osteogenesis

BACKGROUND

Angiogenesis is crucial for formation of a stable regenerate during distraction osteogenesis (DO). This experimental study evaluates if bone morphogenic protein-2 (BMP-2) and desferrioxamine (DFO), two agents which are known to induce neoangiogenesis in vivo, would increase angiogenesis and osteogenesis, and improve mechanical properties of bone regenerate in DO model.

METHODS

Twenty-four tibias of 24 New Zealand rabbits were osteotomized and fixed with semi-circular fixators. Three groups of 8 animals were formed. BMP-2 soaked scaffolds were used in the first group, whereas daily local DFO injections were made in the second group. Subjects in the control group did not receive any agents during the surgery or in the distraction period. The rabbits in all three groups underwent distraction at a rate of 0.6 mm/day for 15 days following the 7-day latent period. Animals were sacrificed on day 38, and the tibia were harvested for histological and mechanical examination of the regenerate.

RESULTS

All 24 rabbits survived the surgical procedure, and there were no side effects against the BMP-2 and local DFO. Three-point bending tests revealed a higher force (361 ± 267 N.) required for fracture in Group 1 (p: 0.018). Similarly, the bending moment in Group 1 (5.4 ± 4.0 Nmm) was significantly higher than the other groups (p: 0.021). There was no significant difference between the groups in terms of deflection and stiffness (p ˃ 0.05). Histologically, there was no statistical difference between the groups in terms of endochondral, periosteal, and intramembranous ossification and VEGF activity (p ˃ 0.05).

CONCLUSION

BMP-2 and DFO stimulate angiogenesis by increasing VEGF activity. Angiogenesis is one of the most important mechanisms for the initiation and maintenance of new bone formation. Stimulation of angiogenesis in unfavorable biomechanical conditions may not be sufficient for ideal bone formation.

MiR-20a: a mechanosensitive microRNA that regulates fluid shear stress-mediated osteogenic differentiation via the BMP2 signaling pathway by targeting BAMBI and SMAD6

Background

MicroRNAs (miRNAs) are crucial regulators of diverse biological and pathological processes. This study aimed to investigate the role of microRNA 20a (miR-20a) in fluid shear stress (FSS)-mediated osteogenic differentiation.

Methods

In the present study, we subjected osteoblast MC3T3-E1 cells or mouse bone marrow stromal cells (BMSCs) to single bout short duration FSS (12 dyn/cm² for 1 hour) using a parallel plate flow system. The expression of miR-20a was quantified by miRNA array profiling and real-time quantitative polymerase chain reaction (qRT-PCR) during FSS-mediated osteogenic differentiation. The expression of osteogenic differentiation markers such as Runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), and SP7 transcription factor (SP7) was detected. Bioinformatics analysis and a luciferase assay were performed to confirm the potential targets of miR-20a.

Results

Osteoblast-expressed miR-20a is sensitive to the mechanical environments of FSS, which are differentially up-regulated during steady FSS-mediated osteogenic differentiation. MiR-20a enhances FSS-induced osteoblast differentiation by activating the bone morphogenetic protein 2 (BMP2) signaling pathway. Both BMP and activin membrane-bound inhibitor (BAMBI) and mothers against decapentaplegic family member 6 (SMAD6) are targets of miR-20a that negatively regulate the BMP2 signaling pathway.

Conclusions

MiR-20a is a novel mechanosensitive miRNA that can enhance osteoblast differentiation in FSS mechanical environments, implying that this miRNA might be a target for bone tissue engineering and orthodontic bone remodeling for regenerative medicine applications.

Optimization and Validation of a Custom-Designed Perfusion Bioreactor for Bone Tissue Engineering: Flow Assessment and Optimal Culture Environmental Conditions

Various perfusion bioreactor systems have been designed to improve cell culture with three-dimensional porous scaffolds, and there is some evidence that fluid force improves the osteogenic commitment of the progenitors. However, because of the unique design concept and operational configuration of each study, the experimental setups of perfusion bioreactor systems are not always compatible with other systems. To reconcile results from different systems, the thorough optimization and validation of experimental configuration are required in each system. In this study, optimal experimental conditions for a perfusion bioreactor were explored in three steps. First, an in silico modeling was performed using a scaffold geometry obtained by microCT and an expedient geometry parameterized with porosity and permeability to assess the accuracy of calculated fluid shear stress and computational time. Then, environmental factors for cell culture were optimized, including the volume of the medium, bubble suppression, and medium evaporation. Further, by combining the findings, it was possible to determine the optimal flow rate at which cell growth was supported while osteogenic differentiation was triggered. Here, we demonstrated that fluid shear stress up to 15 mPa was sufficient to induce osteogenesis, but cell growth was severely impacted by the volume of perfused medium, the presence of air bubbles, and medium evaporation, all of which are common concerns in perfusion bioreactor systems. This study emphasizes the necessity of optimization of experimental variables, which may often be underreported or overlooked, and indicates steps which can be taken to address issues common to perfusion bioreactors for bone tissue engineering.

A comparative study of the effects of platelet-rich fibrin, concentrated growth factor and platelet-poor plasma on the healing of tooth extraction sockets in rabbits

BACKGROUND

Autologous platelet concentrate has been widely used to encourage the regeneration of hard and soft tissues. Up to now, there are three generations of autologous platelet concentrates. Many studies have shown that the three autologous concentrates have different effects, but the specific diversities have not been studied. The purpose of this study was to explore and compare the effects of platelet-rich fibrin, concentrated growth factor and platelet-poor plasma on the healing of tooth extraction sockets in New Zealand rabbits.

METHODS

A total of 24 healthy male New Zealand white rabbits aged 8-12 weeks were selected. The experimental animals were randomly divided into four groups: three experimental groups were respectively implanted with PPP, CGF and PRF gel after bilateral mandibular anterior teeth were extracted, and the control group did not implant any material. The alveolar bone of the mandibular anterior region was taken at 2, 4 and 8 weeks after operation. The height and width of the extraction wound were detected by CBCT, the growth of the new bone was observed by HE and Masson staining, and the expression of osteogenic genes was detected by real-time PCR. Data were analyzed using IBM SPSS statistical package 22.0.

RESULTS

The radiological results showed that alveolar bone resorption in all groups gradually increased over time. However, the experimental groups showed lower amounts of bone resorption. The histological results showed that new bone formation was observed in all groups. Over time, the new bone trabeculae of the CGF group became closely aligned while those in the PPP and PRF groups remained scattered. PCR results showed that the expression of BMP-2 and ALP was higher in the experimental groups than the control group.

CONCLUSION

In conclusion, the application of PRF, CGF and PPP in tooth extraction sockets effectively promoted bone regeneration. CGF showed more effective bone induction and tissue regeneration ability in the long term.

Biofabrication of the osteochondral unit and its applications: Current and future directions for 3D bioprinting

Multiple prevalent diseases, such as osteoarthritis (OA), for which there is no cure or full understanding, affect the osteochondral unit; a complex interface tissue whose architecture, mechanical nature and physiological characteristics are still yet to be successfully reproduced in vitro. Although there have been multiple tissue engineering-based approaches to recapitulate the three dimensional (3D) structural complexity of the osteochondral unit, there are various aspects that still need to be improved. This review presents the different pre-requisites necessary to develop a human osteochondral unit construct and focuses on 3D bioprinting as a promising manufacturing technique. Examples of 3D bioprinted osteochondral tissues are reviewed, focusing on the most used bioinks, chosen cell types and growth factors. Further information regarding the applications of these 3D bioprinted tissues in the fields of disease modelling, drug testing and implantation is presented. Finally, special attention is given to the limitations that currently hold back these 3D bioprinted tissues from being used as models to investigate diseases such as OA. Information regarding improvements needed in bioink development, bioreactor use, vascularisation and inclusion of additional tissues to further complete an OA disease model, are presented. Overall, this review gives an overview of the evolution in 3D bioprinting of the osteochondral unit and its applications, as well as further illustrating limitations and improvements that could be performed explicitly for disease modelling.

The cytoskeleton and connected elements in bone cell mechano-transduction

Bone is a mechano-responsive tissue that adapts to changes in its mechanical environment. Increases in strain lead to increased bone mass acquisition, whereas decreases in strain lead to a loss of bone mass. Given that mechanical stress is a regulator of bone mass and quality, it is important to understand how bone cells sense and transduce these mechanical cues into biological changes to identify druggable targets that can be exploited to restore bone cell mechano-sensitivity or to mimic mechanical load. Many studies have identified individual cytoskeletal components - microtubules, actin, and intermediate filaments - as mechano-sensors in bone. However, given the high interconnectedness and interaction between individual cytoskeletal components, and that they can assemble into multiple discreet cellular structures, it is likely that the cytoskeleton as a whole, rather than one specific component, is necessary for proper bone cell mechano-transduction. This review will examine the role of each cytoskeletal element in bone cell mechano-transduction and will present a unified view of how these elements interact and work together to create a mechano-sensor that is necessary to control bone formation following mechanical stress.

Shear Stress Modulates Osteoblast Cell and Nucleus Morphology and Volume

Mechanical loading preserves bone mass and function—yet, little is known about the cell biological basis behind this preservation. For example, cell and nucleus morphology are critically important for cell function, but how these morphological characteristics are affected by the physiological mechanical loading of bone cells is under-investigated. This study aims to determine the effects of fluid shear stress on cell and nucleus morphology and volume of osteoblasts, and how these effects relate to changes in actin cytoskeleton and focal adhesion formation. Mouse calvaria 3T3-E1 (MC3T3-E1) osteoblasts were treated with or without 1 h pulsating fluid flow (PFF). Live-cell imaging was performed every 10 min during PFF and immediately after PFF. Cytoskeletal organization and focal adhesions were visualized, and gene and protein expression quantified. Two-dimensional (2D) and three-dimensional (3D) morphometric analyses were made using MeasureStack and medical imaging interaction toolkit (MITK) software. 2D-images revealed that 1 h PFF changed cell morphology from polygonal to triangular, and nucleus morphology from round to ellipsoid. PFF also reduced cell surface area (0.3-fold), cell volume (0.3-fold), and nucleus volume (0.2-fold). During PFF, the live-cell volume gradually decreased from 6000 to 3000 µm³. After PFF, α-tubulin orientation was more disorganized, but F-actin fluorescence intensity was enhanced, particularly around the nucleus. 3D-images obtained from Z-stacks indicated that PFF increased F-actin fluorescence signal distribution around the nucleus in the XZ and YZ direction (2.3-fold). PFF increased protein expression of phospho-paxillin (2.0-fold) and integrin-α5 (2.8-fold), but did not increase mRNA expression of paxillin-a (PXNA), paxillin-b (PXNB), integrin-α5 (ITGA51), or α-tubulin protein expression. In conclusion, PFF induced substantial changes in osteoblast cytoskeleton, as well as cell and nucleus morphology and volume, which was accompanied by elevated gene and protein expression of adhesion and structural proteins. More insights into the mechanisms whereby mechanical cues drive morphological changes in bone cells, and thereby, possibly in bone cell behavior, will aid the guidance of clinical treatment, particularly in the field of orthodontics, (oral) implantology, and orthopedics.

Calcium response in bone cells at different osteogenic stages under unidirectional or oscillatory flow

It was found that preosteoblast MC3T3-E1 cells were less responsive in calcium signaling than mature osteocyte MLO-Y4 cells when a steady fluid flow was exerted on a micropatterned cell network. However, the effect of fluid flow on the calcium response in preosteocyte MLO-A5 was seldom investigated. In the present study, MLO-A5 as well as MC3T3-E1 and MLO-Y4 cells were cultured on a regular substrate with high or low density under unidirectional or oscillatory fluid flow. The results showed that calcium oscillation in the cells during late osteogenesis was significantly stronger than during early osteogenesis regardless of the fluid flow type or the presence of a physical cell-cell connection. Calcium oscillation produced by the oscillatory flow in the three types of cells was stronger than that produced by the unidirectional flow, but MC3T3-E1 and MLO-A5 cells exhibited limited potential for calcium oscillation compared with MLO-Y4 cells. After suramin was used to block the binding of extracellular adenosine triphosphate (ATP) to the membrane P2 receptor, the calcium oscillation in the three types of bone cells with or without physical connections was significantly suppressed as a single responsive peak under unidirectional flow. For the ATP-blocking group of low-density cells under oscillatory flow, the number of oscillation peaks in three types of cells was still more than two. It indicates that besides the ATP pathway, other mechanosensitive calcium pathways may exist under oscillatory flow. The present study provided further evidence for the osteogenic stage-dependent calcium response of bone cells under unidirectional or oscillatory fluid flow.

Isolation and Characterization of Peptides from Mytilus edulis with Osteogenic Activity in Mouse MC3T3-E1 Preosteoblast Cells

Seafood provides a range of health benefits because of its high protein levels. In this study, a novel peptide, YPRKDETGAERT, was identified from NHA-2 of Mytilus edulis by capillary-electrophoresis electrospray ionization-quadrupole-time of flight (CESI-Q-TOF). Peptide YPRKDETGAERT showed the highest affinity among all the peptides, with -CDOCKER energy values of 204.482 kcal/mol on one integrin (PDB: 3VI4 ) and 210.16 kcal/mol on another integrin (PDB: 1L5G ). The secondary mass spectrogram at the m/ z of peptide YPRKDETGAERT was 1422.53 Da, which was determined by CESI-Q-TOF. Peptide YPRKDETGAERT induced an increase of 28.27 ± 3.66% in mouse-MC3T3-E1-preosteoblast-cell growth. The alkaline-phosphatase activity of peptide YPRKDETGAERT was 2.79 ± 0.07 mU, which was an increase of 21.25% compared with that of the control. These results provide theoretical and practical insights for the preparation and application of osteogenic peptides in the functional-foods industry.

Synergistic Effects of Controlled-Released BMP-2 and VEGF from nHAC/PLGAs Scaffold on Osteogenesis

Tissue engineering bones take great advantages in massive bone defect repairing; under the induction of growth factors, seed cells differentiate into osteoblasts, and the scaffold materials gradually degrade and are replaced with neogenetic bones, which simulates the actual pathophysiological process of bone regeneration. However, mechanism research is required and further developed to instruct elements selection and optimization. In the present study, we prepared vascular endothelial growth factor/bone morphogenetic protein-2- nanohydroxyapatite/collagen (VEGF/ BMP-2- nHAC/ PLGAs) scaffolds and inoculated mouse MC3T3-E1 preosteoblasts to detect osteogenic indexes and activation of related signaling pathways. The hypothesis is to create a three-dimensional environment that simulates bone defect repairing, and p38 mitogen-activated kinase (p38) inhibitor was applied and osterix shRNA was transferred into mouse MC3T3-E1 preosteoblasts to further investigate the molecular mechanism of crosstalk between BMP-2 and VEGF. Our results demonstrated the following: (1) BMP-2 and VEGF were sustainably released from PLGAs microspheres. (2) nHAC/PLGAs scaffold occupied a three-dimensional porous structure and has excellent physical properties. (3) MC3T3-E1 cells proliferated and differentiated well in the scaffold. (4) Osteogenic differentiation related factors expression of VEGF/BMP-2 loaded scaffold was obviously higher than that of other groups; p38 inhibitor SB203580 decreased the nucleus/cytoplasm ratio of osterix expression. To conclude, the active artificial bone we prepared could provide a favorable growth space for MC3T3-E1 cells, and osteogenesis and maturation reinforced by simultaneous VEGF and BMP-2 treatment may be mainly through the activation of the p38 MAPK pathway to promote nuclear translocation of osterix protein.

Knockdown Indian Hedgehog (Ihh) does not delay Fibular Fracture Healing in genetic deleted Ihh mice and pharmaceutical inhibited Ihh Mice

The objective of this study was to determine if Ihh is required for fracture healing. Fibular fracture was created in adult Col2a1-CreER^T2; Ihh^fl/fl mice. Ihh^fl/fl mice received Tamoxifen (TM) to delete Ihh. WT mice received Cyclopamine to inhibit Hh pathway. Callus tissue properties and Ihh pathway were analyzed at 1, 2, and 3 weeks post-fracture by X-ray, micro-CT, mechanical test, RT-PCR and immunohistochemistry. Deleted Ihh was evidenced by the occurrence of growth plate closure in the Ihh^fl/fl mice by X-ray 3 weeks after TM treatment. All mice showed fracture healing at 3 weeks post-operation. Histology analysis indicated that, compared to the control, cartilage area was less in fracture sites from Ihh deficient animals by either genetic deletion or drug inhibition at 1 and 2 weeks post-fracture. Ihh immunostaining and its mRNA level were diminished in the fracture callus in Ihh reduced mice. There was no significant difference in BV/TV, BMD and mechanical test. Interruption to Ihh pathway by either genetic or pharmaceutical approach didn’t affect fibular fracture healing in these mice. This surprised finding implicates that the deleted Ihh does not affect fracture healing in this model.

The role of the micro-pattern and nano-topography of hydroxyapatite bioceramics on stimulating osteogenic differentiation of mesenchymal stem cells

The micro/nano hybrid structure is considered to be a biomaterial characteristic to stimulate osteogenesis by mimicking the three-dimensional structure of the bone matrix. However, the mechanism of the hybrid structure induced osteogenic differentiation of stem cells is still unknown. For elucidating the mechanisms, one of the challenge is to directly fabricate micro/nano hybrid structure on bioceramics because of its brittleness. In this study, hydroxyapatite (HA) bioceramics with the micro/nano hybrid structure were firstly fabricated via a hydrothermal treatment and template method, and the effect of the different surface structures on the expression of integrins, BMP2 signaling pathways and cell-cell communication was investigated. Interestingly, the results suggested that the osteogenic differentiation induced by micro/nano structures was modulated first through activating integrins and then further activating BMP2 signaling pathway and cell-cell communication, while activated BMP2 could in turn activate integrins and Cx43-related cell-cell communication. Furthermore, differences in activation of integrins, BMP2 signaling pathway, and gap junction-mediated cell-cell communication were observed, in which nanorod and micropattern structures activated different integrin subunits, BMP downstream receptors and Cx43. This finding may explain the synergistic effect of the micro/nano hybrid structure on the activation of osteogenic differentiation of BMSCs. Based on our study, we concluded that the different activation mechanisms of micro- and nano-structures led to the synergistic stimulatory effect on integrin activation and osteogenesis, in which not only the direct contact of cells on micro/nano structure played an important role, but also other surface characteristics such as protein adsorption might contribute to the bioactive effect.

STATEMENT OF SIGNIFICANCE

The micro/nano hybrid structure has been found to have synergistic bioactivity on osteogenesis. However, it is still a challenge to fabricate the hybrid structure directly on the bioceramics, and the role of micro- and nano-structure, in particular the mechanism of the micro/nano-hybrid structure induced stem cell differentiation is still unknown. In this study, we firstly fabricated hydroxyapatite bioceramics with the micro/nano hybrid structure, and then investigated the effect of different surface structure on expression of integrins, BMP2 signaling pathways and cell-cell communication. Interestingly, we found that the osteogenic differentiation induced by structure was modulated first through activating integrins and then further activating BMP2 signaling pathway and cell-cell communication, and activated BMP2 could in turn activate some integrin subunits and Cx43-related cell-cell communication. Furthermore, differences in activation of integrins, BMP2 signaling pathway, and gap junction-mediated cell-cell communication were observed, in which nanorod and micropattern structures activated different integrin subunits, BMP downstream receptors and Cx43. This finding may explain the synergistic effect of the micro/nano hybrid structure on the activation of osteogenic differentiation of BMSCs. Based on our study, we concluded that the different activation mechanisms of micro- and nano-structures led to the synergistic stimulatory effect on integrin activation and osteogenesis, in which not only the direct contact of cells on micro/nano structure played an important role, but also other surface characteristics such as protein adsorption might contribute to the bioactive effect.

In Vitro Bone Cell Models: Impact of Fluid Shear Stress on Bone Formation

This review describes the role of bone cells and their surrounding matrix in maintaining bone strength through the process of bone remodeling. Subsequently, this work focusses on how bone formation is guided by mechanical forces and fluid shear stress in particular. It has been demonstrated that mechanical stimulation is an important regulator of bone metabolism. Shear stress generated by interstitial fluid flow in the lacunar-canalicular network influences maintenance and healing of bone tissue. Fluid flow is primarily caused by compressive loading of bone as a result of physical activity. Changes in loading, e.g., due to extended periods of bed rest or microgravity in space are associated with altered bone remodeling and formation in vivo. In vitro, it has been reported that bone cells respond to fluid shear stress by releasing osteogenic signaling factors, such as nitric oxide, and prostaglandins. This work focusses on the application of in vitro models to study the effects of fluid flow on bone cell signaling, collagen deposition, and matrix mineralization. Particular attention is given to in vitro set-ups, which allow long-term cell culture and the application of low fluid shear stress. In addition, this review explores what mechanisms influence the orientation of collagen fibers, which determine the anisotropic properties of bone. A better understanding of these mechanisms could facilitate the design of improved tissue-engineered bone implants or more effective bone disease models.

Cyclical compressive stress induces differentiation of rat primary mandibular condylar chondrocytes through phosphorylated myosin light chain II

The role of myosin light chain II (MLC‑II) in cellular differentiation of rat mandibular condylar chondrocytes (MCCs) induced by cyclical uniaxial compressive stress (CUCS) remains unclear. In the current study, a four‑point bending system was used to apply CUCS to primary cultured MCCs from rats. It was identified that CUCS stimulated features of cellular differentiation including morphological alterations, cytoskeleton rearrangement and overproduction of proteoglycans. Furthermore, CUCS promoted runt‑related transcription factor‑2 (RUNX2) expression at mRNA (P<0.01) and protein levels (P<0.05) and elevated alkaline phosphatase (ALP) activity (P<0.01), which are both markers of osteogenic differentiation. Under conditions of stress, western blotting indicated that the ratio of phosphorylated MLC‑II to total MLC‑II was increased significantly (P<0.05). Silencing MLC‑II by RNA interference reduced ALP activity (P<0.01), and eliminated RUNX2 mRNA expression (P<0.01). Addition of the MLC kinase inhibitor, ML‑7, reduced the CUCS‑associated upregulation of RUNX2 expression (P<0.01) and ALP activity (P<0.01). The data indicated that CUCS promoted cellular differentiation of rat primary MCCs, and this was suggested to be via the phosphorylation of MLC‑II.

Fluid shear stress stimulates osteogenic differentiation of human periodontal ligament cells via the extracellular signal-regulated kinase 1/2 and p38 mitogen-activated protein kinase signaling pathways

BACKGROUND

Fluid shear stress (FSS) is a major type of mechanical stress that is loaded on human periodontal ligament cells (hPDLCs) during mastication and orthodontic tooth movement. This study aims to clarify the effect of FSS on the osteogenic differentiation of hPDLCs and to further verify the involvement of mitogen-activated protein kinase (MAPK) signaling in this process.

METHODS

After isolation and characterization, hPDLCs were subjected to 2-hour FSS at 12 dynes/cm(2), and cell viability, osteogenic gene mRNA expression, alkaline phosphatase (ALP) activity, secretion of Type I collagen (COL-I), and calcium deposition were assayed. The levels of phosphorylated p38 and phosphorylated extracellular signal-regulated kinase 1/2 (ERK1/2) in response to FSS were detected by Western blot, and the involvement of ERK1/2 and p38 MAPK signaling pathways in hPDLC osteogenesis under FSS was investigated using the specific MAPK inhibitors U0126 (2Z,3Z)-2,3-bis[amino(2-aminophenylthio)methylene]succinonitrile,ethanol) and SB203580 (4-[4-(4-fluorophenyl)-2-(4-[methylsulfinyl]phenyl)-1H-imidazol-5-yl]pyridine).

RESULTS

The application of FSS on hPDLCs induced an early morphologic change and rearrangement of filamentous actin. ALP activity, messenger RNA (mRNA) levels of osteogenic genes, COL-I, and osteoid nodules were significantly increased by FSS. Moreover, ERK1/2 and p38 were activated in different ways after FSS exposure. U0126 and SB203580 completely blocked the FSS-induced increases in ALP activity and osteogenic gene mRNA expression and osteoid nodules formation.

CONCLUSIONS

FSS is an effective approach for stimulating osteogenic differentiation of hPDLCs. The ERK1/2 and p38 MAPK signaling pathways are involved in this cellular process.

Cyclic stretch enhances bone morphogenetic protein-2-induced osteoblastic differentiation through the inhibition of Hey1

Substantial evidence has indicated that osteoblastic differentiation may be regulated by mechanical loads or bone morphogenetic protein-2 (BMP-2). BMP-2-induced in vivo osteogenesis can be significantly enhanced in the presence of mechanical stimuli, revealing the therapeutic potential of the combined application of BMP-2 and mechanical loads in clinical bone diseases (e.g., bone fractures and osteoporosis); however, the underlying mechanisms remain elusive. In this study, we found that cyclic stretch or BMP-2 alone increased the expression of osteoblastic differentiation markers, including alkaline phosphatase (ALP) and runt-related transcription factor 2 (Runx2), as shown by RT-qPCR, western blot analysis and ALP activity test. Furthermore, our results revealed that cyclic mechanical stretch with 10% elongation at 0.1 Hz significantly enhanced the BMP-2-induced upregulation of ALP and Runx2 expression in osteoblast-like MC3T3-E1 cells. Cyclic stretch also inhibited the BMP-2-induced upregulation of Hes-related family bHLH transcription factor with YRPW motif 1 (Hey1, measured by RT-qPCR and immunofluorescence staining), a potent negative regulator of osteogenesis. Moreover, the transient transfection of a Hey1 expression plasmid (pcDNA3.1-Hey1) significantly reversed the effects of cyclic stretch on the BMP-2-induced upregulation of differentiation markers in the MC3T3-E1 cells. This revealed the importance of Hey1 in modulating BMP-2-induced osteoblastic differentiation in response to cyclic stretch. Taken together, our results demonstrated that cyclic stretch enhanced the BMP-2-induced osteoblastic differentiation through the inhibition of Hey1. The present study broadens our fundamental knowledge of osteoblastic mechanotransduction and also sheds new insight into the mechanisms through which the combined application of BMP-2 and mechanical load promotes osteogenesis.

Effects of sequentially released BMP-2 and BMP-7 from PELA microcapsule-based scaffolds on the bone regeneration

Osteoinductive biomaterials are helpful for the therapy of large bone defects and provide an alternative to autogenous bone and allografts. Recently, multiple growth factors are delivered to mimic the natural process of bone healing in the bone tissue engineering. Herein, we investigated the effects of sequential released bone morphogenetic protein-2 (BMP-2) and bone morphogenetic protein-7 (BMP-7) from polylactide-poly (ethylene glycol)-polylactide (PELA) microcapsule-based scaffolds on the bone regeneration. Through improving the double emulsion/solvent evaporation technique, BMP-7 was encapsulated in PELA microcapsules, to the surface of which BMP-2 was attached. Then, the scaffold (BMP-2/PELA/BMP-7) was fused by these microcapsules with dichloromethane vapor method. In vitro, it sequentially delivered bioactive BMP-2 and BMP-7 and partially imitated the profile of BMPs expression during the fracture healing. To determine the bioactivity of released BMP-2 and BMP-7, alkaline phosphatase (AKP) activity was analyzed in MC3T3-E1 cells. When compared with simple BMP-2 plus BMP-7group and pure PELA group, the AKP activity in BMP-2/PELA/BMP-7 group significantly increased. MTT assay indicated the BMP-loaded PELA scaffold had no adverse effects on cell activity. In addition, the effects of BMP-loaded scaffolds were also investigated in a rat femoral defect model by micro-computed tomographic (mCT) and histological examination. At 4 and 8 weeks post-implantation, BMP-2/PELA/BMP-7 significantly promoted osteogenesis as compared to other groups. The scaffold underwent gradual degradation and replacement by new bones at 8 weeks. Our findings suggest that the sequential release of BMP-2 and BMP-7from PELA microcapsule-based scaffolds is promising for the therapy of bone defects.

Cyclic mechanical stretch promotes energy metabolism in osteoblast-like cells through an mTOR signaling-associated mechanism

Energy metabolism is essential for maintaining function and substance metabolism in osteoblasts. However, the role of cyclic stretch in regulating osteoblastic energy metabolism and the underlying mechanisms remain poorly understood. In this study, we found that cyclic stretch (10% elongation at 0.1 Hz) significantly enhanced glucose consumption, lactate levels (determined using a glucose/lactate assay kit), intracellular adenosine triphosphate (ATP) levels (quantified using rLuciferase/Luciferin reagent) and the mRNA expression of energy metabolism-related enzymes [mitochondrial ATP synthase, L-lactate dehydrogenase A (LDHA) and enolase 1; measured by RT-qPCR], and increased the phosphorylation levels of Akt, mammalian target of rapamycin (mTOR) and p70s6k (measured by western blot analysis) in human osteoblast‑like MG‑63 cells. Furthermore, the inhibition of Akt or mTOR with an antagonist (wortmannin or rapamycin) suppressed the stretch-induced increase in glucose consumption, lactate levels, intracellular ATP levels and the expression of mitochondrial ATP synthase and LDHA, indicating the significance of the Akt/mTOR/p70s6k pathway in regulating osteoblastic energy metabolism in response to mechanical stretch. Thus, we concluded that cyclic stretch regulates energy metabolism in MG‑63 cells partially through the Akt/mTOR/p70s6k signaling pathway. The present findings provide novel insight into osteoblastic mechanobiology from the perspective of energy metabolism.

Integrin-β1, not integrin-β5, mediates osteoblastic differentiation and ECM formation promoted by mechanical tensile strain

BACKGROUND

Mechanical strain plays a great role in growth and differentiation of osteoblast. A previous study indicated that integrin-β (β1, β5) mediated osteoblast proliferation promoted by mechanical tensile strain. However, the involvement of integrin-β in osteoblastic differentiation and extracellular matrix (ECM) formation induced by mechanical tensile strain, remains unclear.

RESULTS

After transfection with integrin-β1 siRNA or integrin-β5 siRNA, mouse MC3T3-E1 preosteoblasts were cultured in cell culture dishes and stimulated with mechanical tensile strain of 2500 microstrain (με) at 0.5 Hz applied once a day for 1 h over 3 or 5 consecutive days. The cyclic tensile strain promoted osteoblastic differentiation of MC3T3-E1 cells. Transfection with integrin-β1 siRNA attenuated the osteoblastic diffenentiation induced by the tensile strain. By contrast, transfection with integrin-β5 siRNA had little effect on the osteoblastic differentiation induced by the strain. At the same time, the result of ECM formation promoted by the strain, was similar to the osteoblastic differentiation.

CONCLUSION

Integrin-β1 mediates osteoblast differentiation and osteoblastic ECM formation promoted by cyclic tensile strain, and integrin-β5 is not involved in the osteoblasts response to the tensile strain.

Inhibition of FSS-induced actin cytoskeleton reorganization by silencing LIMK2 gene increases the mechanosensitivity of primary osteoblasts

Mechanical stimulation plays an important role in bone cell metabolic activity. However, bone cells lose their mechanosensitivity upon continuous mechanical stimulation (desensitization) and they can recover the sensitivity with insertion of appropriate rest period into the mechanical loading profiles. The concrete molecular mechanism behind the regulation of cell mechanosensitivity still remains unclear. As one kind of mechanosensitive cell to react to the mechanical stimulation, osteoblasts respond to fluid shear stress (FSS) with actin cytoskeleton reorganization, and the remodeling of actin cytoskeleton is closely associated with the alteration of cell mechanosensitivity. In order to find out whether inhibiting the actin cytoskeleton reorganization by silencing LIM-kinase 2 (LIMK2) gene would increase the mechanosensitivity of primary osteoblasts, we attenuated the formation of actin stress fiber under FSS in a more specific way: inhibiting the LIMK2 expression by RNA interference. We found that inhibition of LIMK2 expression by RNA interference attenuated the formation of FSS-induced actin stress fiber, and simultaneously maintained the integrity of actin cytoskeleton in primary osteoblasts. We confirmed that the decreased actin cytoskeleton reorganization in response to LIMK2 inhibition during FSS increased the mechanosensitivity of the osteoblasts, based on the increased c-Fos and COX-2 expression as well as the enhanced proliferative activity in response to FSS. These data suggest that osteoblasts can increase their mechanosensitivity under continuous mechanical stimulation by reducing the actin stress fiber formation through inhibiting the LIMK2 expression. This study provides us with a new and more specific method to regulate the osteoblast mechanosensitivity, and also a new therapeutic target to cure bone related diseases, which is of importance in maintaining bone mass and promoting osteogenesis.

Nanotopography directs mesenchymal stem cells to osteoblast lineage through regulation of microRNA-SMAD-BMP-2 circuit

The aim of this study was to investigate if chemically produced nanotopography on titanium (Ti) surface induces osteoblast differentiation of cultured human bone marrow mesenchymal stem cells (hMSCs) by regulating the expression of microRNAs (miRs). It was demonstrated that Ti with nanotopography induces osteoblast differentiation of hMSCs as evidenced by upregulation of osteoblast specific markers compared with untreated (control) Ti at day 4. At this time-point, miR-sequencing analysis revealed that 20 miRs were upregulated (>twofold) while 20 miRs were downregulated (>threefold) in hMSCs grown on Ti with nanotopography compared with control Ti. Three miRs, namely miR-4448, -4708, and -4773, which were significantly downregulated (>fivefold) by Ti with nanotopography affect osteoblast differentiation of hMSCs. These miRs directly target SMAD1 and SMAD4, both key transducers of the bone morphogenetic protein 2 (BMP-2) osteogenic signal, which were upregulated by Ti with nanotopography. Overexpression of miR-4448, -4708, and 4773 in MC3T3-E1 pre-osteoblasts noticeably inhibited gene and protein expression of SMAD1 and SMAD4 and therefore repressed the gene expression of key bone markers. Additionally, it was observed that the treatment with BMP-2 displayed a higher osteogenic effect on MC3T3-E1 cells grown on Ti with nanotopography compared with control Ti, suggesting that the BMP-2 signaling pathway was more effective on this surface. Taken together, these results indicate that a complex regulatory network involving a miR-SMAD-BMP-2 circuit governs the osteoblast differentiation induced by Ti with nanotopography. J. Cell. Physiol. 229: 1690-1696, 2014. © 2014 Wiley Periodicals, Inc.